Latest Coupling Sleeves Tenders 2026

1 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |29-09-2026 12 Days Left|T247 ID-104167369

supply of - sleeve cpling asy_ 350nb pipe_ 150mm lg , coupling sleeve assly. : 300nb_ mark-324a , sleeve coupling 219a - | quantity - 605

Bankura, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

2 |Bid Value:₹ 3.45 Cr. |EMD:₹ Refer Docs |22-09-2026 5 Days Left|T247 ID-104094954

Jaduguda, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

3 |Bid Value:₹ 2.30 Cr. |EMD:₹ Refer Docs |23-09-2026 6 Days Left|T247 ID-104279670

Sidhi, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

4 |Bid Value:₹ 1.24 Cr. |EMD:₹ 2.48 Lakh |06-10-2026 19 Days Left|T247 ID-104366369

restoration of unit-ist including procurement of material/consumables required - "installation of bulk head on penstock line opening or miv locking for complete arresting water leakages. bulk head to be provided by j&k, pdcl.", "opening of all oil, water and air and grease, pipe lines of turbine and generator.", "installation of erection devices for dismantling / removing of draft tube cone (upper and lower), & runner assembly.", "dismantling of adjusting rings of draft tube, cone.", "dismantling of draft tube upper and the lower, cone.", "installation of bulk head on draft tube opening., bulk head, to be provided by j&k pdcl.", "opening of the supporting plates of regulating rings after disengaging from the connecting rods, of guide vane servomotors.", "dismantling of the existing shaft sleeve, assembly.", "dismantling of guide vane levers, guide vane, links etc.", "dismantling of all the turbine guide bearing, pads and storing them safely.", "decoupling of turbine shaft and the generator, shaft assembly.", "dismantling of all the guide vanes and guide, vane servomotors, etc.", dismantling of all the guide vane bushes from the top cover bush housings. however before their dismantling, diameters of all the pivot bushes shall be measured and recorded., dismantling of the turbine top cover assembly including the lower fixed labyrinth ring., dismantling of the turbine shaft assembly., "dismantling of the existing damaged shaft sleeve, assembly.", dismantling of all the guide vane bushes from the pivot ring assembly. however before their dismantling, diameters of all the pivot bushes shall be measured and recorded., "inspection of all the dismantled studs, dowels, bolts/ nuts, pins to identify their replacement by, new ones.", dismantling of pivot ring assembly., post dismantling activities, "balancing of rotor assembly conducting the impedance measurement of all the rotor pole coils followed by their polarity testing., completing the jointing of all the assembled/ tested rotor poles involving soldering, breezing and proper insulation. measurement of the insulation resistance of the rotor pole winding to check its final healthiness. balancing of rotor assembly including providing of weight", "balancing of rotor assembly including providing, of weight", "thorough cleaning of the complete generator stator core all along its periphery both inside as well as from its outside surface using a suitable, cleaning agent viz mto.", "thorough cleaning of all oil coolers along with, water tubes and pressure testing of the same with assembly.", "thorough cleaning of all turbine guide bearing, oil coolers and pressure testing of the same and assembly.", "thorough cleaning of the complete generator stator winding overhang portions all along its periphery on both its connection-end side as well as from its non-connection end side using a, suitable cleaning agent viz mto.", "blue-matching of rebabitated pads for checking quality of, rebabitating with a surface plate.", "blue-matching of thrust collat bottom surface with the top insulation surface for thrust runner, disc at service bay.", "blue-matching of rebabitated pads with the, coresponding journal surface on the thrust collar assembly.", blue-matching of rebabitated pads with the coresponding journal surface on the lower bearing journal on the generator shaft assembly., polishing of all the turbine guide bearing pads and blue-matching them with the coresponding journal surface on the turbine bearing journal on the turbine shaft assembly., "conducting the dry-out of the generator stator, winding assembly.", measurement of the insulation resistance of the rotor pole winding to check its final healthiness, "conducting the dry-out of the generator rotor, assembly.", boxup activities, assemblies of the top cover assembly in position with replacement of all its old fasteners by new ones which are to be procured., "replacement of 8mm rubber cord by a new, one.", "trial assembly of runner with pivot ring and, measurement of bottom labyrinths clearances.", trial assembly of runner with turbine top cover and measurement of top labyrinth clearances., re-assembly of pivot ring assembly in position., "re-assembly of all guide vanes in the pivot ring, assembly.", "lowering of turbine shaft assembly in the turbine, pit using the erection device.", "re-assembly of all the guide vane bush housings in the top cover and replacement of its damaged fasteners by new ones which are to be, procured", "assembly of regulating ring along with, connecting rods of the guide vane servomotors in the unit.", "lowering of lower bracket assembly along with brake jack assembly in position with all its, fasteners duly tightened.", "lowering of generator rotor assembly in the generator pit, supporting on the jacking pads.", "lowering of upper bracket assembly in position with all its, fasteners duly tightened.", "re-assembly of thrust collar assembly on the generator shaft by shrunk fitting method., checking the vertical movement of thrust collar, assembly.", "reassembly of thrust runner disc assembly, thrust pads, h.s., lubrication system, etc.", "checking of rotational level of generator shaft and correcting, the same", coupling of generator and turbine shaft flanges., "re-assembly of the francis runner assembly and its coupling with turbine shaft using new, coupling bolts & nuts.", "assembly of all associated turbine components viz guide vane servomotors, guide vane lever, & link mechanism.", "carrying out the combined rotational checks of the turbine & generator shafts and correcting the alignment, leveling & equal ioad sharing of, the thrust pads.", "centering of the shaft and setting of bearing clearances in, ugb, lgb & tgb in a concentric manner.", "checking and connecting of all oil pipe lines &, charging of governor.", "bedding & setting of all guide vanes with respect to steel liner, of top cover and lower ring to achieve proper, clearances.", "boxing up all bearings including their oil & water, pipe lines.", "complete assembly of draft tube upper cone, including full tightening of all bolts.", "complete assembly of lower cone with full, tightening of bolts.", "complete assembly of adjusting ring with full, tightening of all the bolts.", "complete assembly of shaft sealing system, including assembly of water pipelines", "complete assembly of oil bath of thrust bearing, with full tightening of bolts.", "assembly of grease pipeline of upper bushes and lower bushes and assembly of water pipe, line of lower bush", "measurement of insulation resistance value of, stator and rotor winding.", "spinning of the machine, dry out and then, synchronizing/ loading of the unit.", "carrying out the dry-out of the generator with windage loss method till the satisfactory levels of ir & the pi values is, achieved.", voltage build-up and subsequent synchronization of the unit followed by loading in steps and checking the unit vibrations at every step till the unit reached the rated load., carrying out the measurement of unit vibrations & dynamic balancing of the unit as required., labyrinth (stationary upper lower), shaft seal (flapper set), "all general purpose consumables, d&h make mo-309 5s welding electrodes, 0-rings, general purpose fasteners, stainless steel shims, insulation paints, etc. required during the, restoration work." for its restoration at ushp-ii, kangan.

Srinagar, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

5 |Bid Value:₹ 1.18 Cr. |EMD:₹ Refer Docs |21-09-2026 4 Days Left|T247 ID-104065094

Korea, Chhattisgarh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

6 |Bid Value:₹ 76.25 Lakh |EMD:₹ Refer Docs |28-09-2026 11 Days Left|T247 ID-104255590

supply, testing and commissioning of portable diesel engine-driven auto priming dewatering pump sets having a minimum discharge capacity of 400 m/hr and total head of 1520 m, mounted on a four-wheel trolley complete with suction and delivery pipes, suction strainer, pipe couplings, flanges, nuts and bolts, washers, gaskets, specials and all other accessories necessary for complete installation, testing and satisfactory operation, including loading, unloading and transportation, as per the specifications and directions of the engineer-in-charge.(2nd attempt)

Gandhinagar, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

7 |Bid Value:₹ 74.88 Lakh |EMD:₹ Refer Docs |17-09-2026 Ending Today|T247 ID-103842329

corrigendum : supply of - he sector plate assembly for aph 10a and 10b , ce sector plate assembly for aph 10a and 10b , spool assembly of aph 10a and 10b , pin rack and pinion assembly , cold end baskets support gratings , rotor assembly for aph 10b , taper lock bush with adaptor for 5apc gear box of aph- 27vi 74 , seal, complete set for aph a side , seal, complete set for aph b side , axial seal plate assembly of aph 10 a and 10b , by-pass sealing angle arrangement of aph 10a and 10b , bibby resilient coupling type 124-a for aph - spares of air pre heater | quantity - 24

Sonebhadra, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

8 |Bid Value:₹ 44.83 Lakh |EMD:₹ 48.30 K |17-09-2026 Ending Today|T247 ID-104055881

procurement of spares of id, fd and pa fan of 1 x 660 mw, bhusawal tps for aoh.#--bearing housing sealing kit, fd fan rotor assembly sealing kit, blade assembly sealing kit, had sealing kit, lamella coupling settn shaft assy, bearing housing sealing kit, id fan rotor assembly sealing kit, blade assembly sealing kit, had sealing kit, lamella coupling settn shaft assembly, bearing housing sealing kit, pa fan rotor assembly sealing kit, blade assembly sealing kit

Bhusawal, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

9 |Bid Value:₹ 35.83 Lakh |EMD:₹ 39.30 K |26-09-2026 9 Days Left|T247 ID-104055888

procurement of esp spare parts - erm rapping shaft i 3370l pn 1, erm plain bearing pn, erm pin wheel small pn 06, erm vert shaft-i 2502l pn16, erm vert shaft iii middle bot lvl pn 18, erm inner arm assembly, erm outer arm assembly, erm grip coupling, esp brg assy verticadrive, esp brg adapter sleeve 1211, crm, inner arm assembly pn 07, crm outer arm assembly pn 11, crm plain bearing, crm shock pad, crm shaft end pn 01, 5, crm shaft 50 dia 4790 5 length pn 02, crm shaft 50 dia 2250 5 length pn 03, crm shaft 50 dia 3450 5 length pn 04, crm shaft 50 dia 3190 5 length pn 05, crm shaft set ring pn 06, crm shaft sleeve tube i pn 08, crm shock bar guide 2 front side, crm shock bar guide, rear side, :, crm gb clutch, crm gb coupling, crm shaft gland follower of boiler at 1 x 660 mw, bhusawal tps for aoh.

Bhusawal, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

10 |Bid Value:₹ 27.05 Lakh |EMD:₹ 54.10 K |19-09-2026 2 Days Left|T247 ID-104092708

restoration of unit-i including sitc of couplings of unit-ii at mhep pahalgam

Anantnag, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

11 |Bid Value:₹ 18.12 Lakh |EMD:₹ 36.24 K |25-09-2026 8 Days Left|T247 ID-104020968

supply of - gm bush , bshg , bushing , electrode , coupling , packing , bearing rllr , hose , bolt , ring rtnng , ci welding rod - mechnical consumables | quantity - 201

Bardhaman, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

12 |Bid Value:₹ 17.59 Lakh |EMD:₹ 35.00 K |21-09-2026 4 Days Left|T247 ID-103878351

supply of - ball valve , filter element , bde 200 f 2 w 1 0 , logic cartridge valve , logic cartridge valve cover , flow control valve , minimess test coupling , microbore flex hose 1 by 4 inch 630 bar , adaptor , moduler pressure relief valve - purchase of spare parts for hydac make hydraulic power pack installed in opu system at tld4 ps | quantity - 44

Siliguri, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

13 |Bid Value:₹ 14.80 Lakh |EMD:₹ Refer Docs |28-09-2026 11 Days Left|T247 ID-104085736

supply of - cplg assy, rexnord, 70r r10 , cplg assy, s00122812, rexnord, 50r r10 - | quantity - 4

Ramgarh, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

14 |Bid Value:₹ 13.33 Lakh |EMD:₹ 16.80 K |Refer Docs|T247 ID-104100679

procurement of fluid coupling and scoop coupling spares in chp1x660mw btps deepnagar., supply and installation of fabric expansion joints in boiler at unit-6, btps, bhusawal during aoh., procurement of various field instruments installed at scoop oil system of coal handling plant, 1x660mw btps., work of cleaning & repairing of eco outlet to aph inlet ducts of unit-6, 1 x 660mw, btps, bhusawal during aoh., procurement of various rubber consumables at tm 2x500 mw btps deepnagarp,

Bhusawal, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

15 |Bid Value:₹ 13.00 Lakh |EMD:₹ 26.00 K |21-09-2026 4 Days Left|T247 ID-104196902

supply of - vt pump bowl assembly , suspension assembly with line shaft, bearings, , 4-pole, ie3 vertical motor complete , discharge head, sole-base plate, coupling , complete automatic star-delta control , power-control cables, glands, lugs , special erection tools, mandatory spares , third-party inspection and factory performance , packing, freight, transit insurance, unloading , erection, installation, alignment, testing, 8-hour trial - vt pump supply and installation | quantity - 10

Ramgarh, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

16 |Bid Value:₹ 12.28 Lakh |EMD:₹ Refer Docs |28-09-2026 11 Days Left|T247 ID-104118834

supply of flexible dry type complete coupling set between drive turbine to boiler feed pump for tdbfps of 1x500mw unit for capital overhaul 2026-27.

Warangal, Telangana, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

17 |Bid Value:₹ 10.70 Lakh |EMD:₹ 20.00 K |28-09-2026 11 Days Left|T247 ID-104087726

supply of - spare, shaft seal baqe gg n d28 , spare, o-ring epdm 171.04x3.53 , kit, wear ring d76x10 1.4408 m5x8 , kit, pump housing 50-32-160, 1.4408 , kit, pump shaft d24-d60 1.4408 , spare, impeller 50-32-160 or 177 d24 , kit, coupling guard h84,5 , kit, nut m14 d24 6x6x35 1.4401 - supply of spares for grundfos make dm pump | quantity - 24

Ganjam, Orissa, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

18 |Bid Value:₹ 8.62 Lakh |EMD:₹ 17.00 K |17-09-2026 Ending Today|T247 ID-104077318

supply of - brkr crct mccb 00a 415v 4p w suitbl , wire elec cu 17swg , suit arc flash 8cal cm2 size xl , coupling 8in ci , coupling 10in ci , hoist ratchet 5t , block tackle chn puly 3m 5ton isi cmplt , rotating element complete - electrical mechanical spares tools and tackles for enm department | quantity - 27

Bokaro, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

19 |Bid Value:₹ 8.49 Lakh |EMD:₹ Refer Docs |28-09-2026 11 Days Left|T247 ID-104370231

supply of - jayem brick mould set 2pc , jayem ram, jayem ram plates set of 6 pcs , jayem ejection cyl seal set, jayem pressing cyl seal kit, jayem non return valve, pinion gear, suction oil filter, jayem rotary table gear jbm 7a, jayem hydraulic motor jbm 14c, jayem coupling pmg 14, jayem ci roller pmg 10, jayem chain coupling, jayem pulley big pmg 7, jayem pulley small pmg 8 - procurement of ash brick machine spares for nspcl bhilai pp2 | quantity - 29

Durg, Chhattisgarh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

20 |Bid Value:₹ 7.85 Lakh |EMD:₹ 15.70 K |19-09-2026 2 Days Left|T247 ID-104144342

supply and installation of cable trays at haridwar dam. replacement of position meters, shaft encoder couplings, and d.o. cards for the gates at bhimgoda barrage and uglc. installation of shaft encoder couplings and solar batteries for the gates at haridwar dam. installation of connection panels and electromagnetic brakes on the gantry crane at bhimgoda barrage, and repair of the gantry crane motor. aluminum and enamel painting work on the sheds located in the central store complex. painting work on the ceilings and side walls of the internal rest rooms in shed nos. 1 and 2 within the store complex.

Bijnor, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

21 |Bid Value:₹ 7.85 Lakh |EMD:₹ 15.70 K |Refer Docs|T247 ID-104360675

1. supply and installation of cable trays at haridwar dam. 2. replacement of position meters, shaft encoder couplings, and do cards for the gates at bhimgoda barrage and uglc. 3. installation of shaft encoder couplings and solar batteries for the gates at haridwar dam. 4. aluminum and enamel painting work on the sheds located in the central store complex. 5. painting work on the ceilings and side walls of the rest rooms located inside shed nos. 1 and 2 in the store complex. 6. installation of connection panels and electromagnetic brakes, and repair of the motor for the gantry crane installed at bhimgoda barrage. (hindi document)

Pauri Garhwal, Uttarakhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

316+ Latest Coupling Sleeves Tenders

Live Coupling Sleeves Tenders 2026

Bankura, West Bengal, India

Jaduguda, Jharkhand, India

Sidhi, Madhya Pradesh, India

Srinagar, Jammu And Kashmir, India

Korea, Chhattisgarh, India

Gandhinagar, Gujarat, India

Sonebhadra, Uttar Pradesh, India

Bhusawal, Maharashtra, India

Bhusawal, Maharashtra, India

Anantnag, Jammu And Kashmir, India

Bardhaman, West Bengal, India

Siliguri, West Bengal, India

Ramgarh, Jharkhand, India

Bhusawal, Maharashtra, India

Ramgarh, Jharkhand, India

Warangal, Telangana, India

Ganjam, Orissa, India

Bokaro, Jharkhand, India

Durg, Chhattisgarh, India

Bijnor, Uttar Pradesh, India

Pauri Garhwal, Uttarakhand, India