Latest Metal Liner Tenders 2026

1 |Bid Value:₹ Refer Docs |EMD:₹ 13.32 Lakh |30-09-2026 13 Days Left|T247 ID-100301602

corrigendum : manufacturing and supply of 6400 mm over riding derailing switches 1 in 8.5, bg, 60 kg. (uic) on psc sleeper as per rdso drawing no. t-6068 (alt-4) complete, but excluding grsp, insu lating liners, ercs, fish plates and fish bolts & nuts, and ir specification: t 10-2025. note-1: this in cludes cost of all the rails required for manufacturing of this item.note-2:the bifurcation of rh and lh quantity will be advised in coverage purchase order. [ warranty period: 30 months after the date o f delivery ] [ rate of supply 24 units per month , commencement time allowed -1 month ] anywhere in nwr as per tender 217.00 set

Lucknow, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

2 |Bid Value:₹ Refer Docs |EMD:₹ 20.00 Lakh |30-09-2026 13 Days Left|T247 ID-103862362

supply of rate contract for manufacture and supply of galvanised metal liner to rdso drawing no.t-3741-37 42 (alt.7), for use with erc mk-iii with flat toe on concrete sleeper, with latest alteration if any, as amended up to date of tender notice and conforming to irs specification t-56-2025 for metal liners for use with elastic rail clips ( first revision - april 2025), with latest amendment if any, as amended up to date of tender notice. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 la cs ] ]

Tiruchirappalli, Tamil Nadu, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

3 |Bid Value:₹ Refer Docs |EMD:₹ 3.44 Lakh |30-09-2026 13 Days Left|T247 ID-103862363

supply of rate contract for manufacture and supply of galvanized metal liner to rdso drawing no.t-8995, for use on sharp curve with wider psc sleeper and conforming to irs specification t-56-2025 (first revision - april 202 5) for metal liners for use with elastic rail clips. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 la cs ] ]

Tiruchirappalli, Tamil Nadu, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

4 |Bid Value:₹ Refer Docs |EMD:₹ 90.64 K |17-09-2026 Ending Today|T247 ID-103993797

supply of silico manganese steel liner size - 100x80x4 mm thick drg no - wd - 93023 -s/1 a lt %u2013nil item no. 2. material to is: 3885-1992 part-i with amendment 1 and 2 grade-iv hardness 380-420 bhn hardness 380-420 bhn [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]

Ahmedabad, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

5 |Bid Value:₹ Refer Docs |EMD:₹ 20.00 Lakh |26-10-2026 39 Days Left|T247 ID-104268797

supply of manufacture and supply of metal liners 60 kg for use with erc mk-iii flat toe on psc sleepers for 60 kg ( uic) rail to rdso drg. no. t-3740 (alt-7) and confirming to irs specification: t-56-2025 with corrigendum-1. [ warran ty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] - rate contract for manufacture and supply of metal liners 60 kg for use with erc mk-iii flat toe on psc sleepers for 60 kg (uic) rail to rdso drg. no. t-3740 (alt-7)

Jabalpur, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

6 |Bid Value:₹ Refer Docs |EMD:₹ 79.01 K |06-10-2026 19 Days Left|T247 ID-104293831

supply of manufacture and supply of metal liner conforming to rdso drg. no t-8616 & t8617 alt. 1 for use with erc mk-v on concrete sleeper (rt-7008 & rt-8527) suitable for 60kg (uic)/136re rails. specifica tion: metal liners should conform to irs-t-56-2025. this is a safety item. each set of metal liner consists of one metal liner to drg. no. t-8616 and one metal liner to drg. no. t-8617. [ warranty period: 30 months after the date of delivery ] ] - metal liner.

Chakradharpur, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

7 |Bid Value:₹ 99.77 Cr. |EMD:₹ 2.00 Cr. |24-09-2026 7 Days Left|T247 ID-102752383

corrigendum : rfp for design, installation, commissioning and operation and maintenance of public electric vehicle charging infrastructure in rajasthan under category a and category b, in accordance with the pm e drive scheme.

Jaipur, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

8 |Bid Value:₹ 30.00 Cr. |EMD:₹ 60.00 Lakh |24-09-2026 7 Days Left|T247 ID-103464846

development of electric vehicle charging station on dbfot basis in various parking places of different municipal corporations on ppp format

Jaipur, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

9 |Bid Value:₹ 30.00 Cr. |EMD:₹ Refer Docs |Refer Docs|T247 ID-103471794

development of electric vehicle charging station on dbfot basis in various parking places of different municipal corporations on ppp format /scope of work: supply, installation, testing & commissioning of 60kw dual gun ccs2 dc fast charger along with civil & electrical infrastructure from distribution box to charger.

Jaipur, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

10 |Bid Value:₹ 3.45 Cr. |EMD:₹ Refer Docs |22-09-2026 5 Days Left|T247 ID-104094954

Jaduguda, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

11 |Bid Value:₹ 2.60 Cr. |EMD:₹ Refer Docs |21-09-2026 4 Days Left|T247 ID-103335191

corrigendum : supply of - ball joint assy. lh , ball joint assy. rh , tie rod assy. , stub axle assy. abs lh , stub axle assy. abs rh , kit- drag link , king pin kit-std-38-25-fa90-tr , bush - kinpin - std , thrust bearing , ball joint assy- lh , ball joint assy- rh , track rod-front axle- fa90-1660 cd- sealed ball join , drag link - tata and leyland front axle group | quantity - 9238

Lucknow, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

12 |Bid Value:₹ 1.29 Cr. |EMD:₹ Refer Docs |23-09-2026 6 Days Left|T247 ID-103952661

repair jobs in twin table cars, rail changing, mom, l&t stands, radialpart, dummy bar conveyors, gas cutting machines(gcm) etc. and other equipments of cc machines in ccd/sms-1: 1. twin table car rail track repair/replacement: dismantling of damaged rail, repair of pedestal supports, erection of new rail, and alignment of rail w.r.t. existing rail, welding of joints. 2. twin table car mast dismantling, repair/replacement: dismantling, fabrication, erection of mast. dismantling of damaged mast, removal of damaged portion of mast, fabrication, welding of support and bracing pipes, erection of mast, adjustment of tie rod. 3. twin table car current collector dismantling, repair/erection: fabrication and erection of current collector. dismantling of damaged current collector, fabrication of current collector frame, removal and reconditioning of guide rollers, fixing of guide rollers, erection of current collector, and connection of mast. 4. twin table car wheel changing: dismantling of drive gear box and wheel, fixing of new wheel assembly, erection of drive gear box in case of drive wheel changing, lubrication of the wheel. 5. twin table car lt/ct drives repair/re-conditioning: dismantling of lt/ct gear boxes, changing of internals, re-conditioning/changing of couplings. 6. twin table car rollers bearing/bush changing/re-conditioning: removal of damaged bearings, fixing of bush/bearing rollers, fixing of bearing covers. 7. twin table car apron plate repair/replacement: removal of damaged apron plates, fixing of plates/repair of plates. 8. twin table cart: removal of rollers along with bearing housing, erection of new rollers along with bearing housing, alignment of roller coupling, alignment of drive gear boxes w.r.t bevel gear boxes, alignment of rollers w.r.t machine roller tables and hfl roller tables. 9. radial part: repositioning of tk stand in position, alignment and bolt tightening. 10. spindle fixing and spindle pad changing: fixing of spindle, locking the spindle in position, change of spindle pads if required. 11. radial part: checking of radial alignment with template and rectification. 12. radial part - repair/repositioning/replacement of tk tie rod: repositioning of dislocated tie-rod/removal of damaged tie-rod and fixing of tie-rod and locking. 13. tk stand base repair in ccms: removal of damaged base plate, preparation of base, preparation of new base plate. fixing the new base plate and welding the base plate complete. 14. tk1 guide repair in ccms: removal of damaged guide. preparation of guide plate as per curvature. fixing the new guide plate and welding the guide plate complete. 15. mom "c" frame repair in ccm#2: setting pads changing, setting pads shims changing, mould adjustment jacking plates changing, mould location plates changing, swing bolts changing, tee bolt changing, water leak arresting, any welding/cutting works on c frame, all bolts tightening. 16. ccm#2 radius correction: assembling of 12mt template, checking of radial alignment with template and rectification of strand. checking of template with master template. dismantling of template and put the template in designated place roller tables. 17. mom c frame leveling: checking of mom c frame leveling with straight edge and rectification. 18. repair/change of idle roller stands (small) in gega gas-cutting machines: removal of damaged idle roller assembly, reconditioning of bearing blocks, greasing, fixing back of idle roller assemblies. 19. repair of water cooled beams in gcms: fabrication/repair of damaged portion of water-cooled beams, cleaning/changing of chocked portions of water-cooled beams, flushing of beams, water testing of beams. 20. repair of idle roller stands (big) in gcms: dismantling of bearing blocks of idle roller stands, repair/change/rotation of roller as per requirement, assembly of bearing blocks, greasing and alignment. 21. change of idle roller stands (big) in gcms: dismantling of idle roller stand assembly, cleaning of foundation by gas-cutting and lancing, erection of new idle roller stand, connection of grease and water lines, alignment with assembling of 12mt. template, checking of radial alignment with template and rectification of strand. 22. fabrication/repair/change of lt strikers: dismantling of damaged lt striker, fabrication/repair of striker as per requirement, testing of striker and adjustment. 23. repair/replacement of pipelines-dn-15: isolation of pipelines from gases, purging of pipelines with inert gas, repair/fabrication of damaged pipelines of all gases, flushing of repaired pipelines, testing for leakages and opening of isolation valves. 24. repair/replacement of pipelines-dn-20: isolation of pipelines from gases, purging of pipelines with inert gas, repair/fabrication of damaged pipelines of all gases, flushing of repaired pipelines, testing for leakages and opening of isolation valves. 25. repair/replacement of pipelines-dn-25: isolation of pipelines from gases, purging of pipelines with inert gas, repair/fabrication of damaged pipelines of all gases, flushing of repaired pipelines, testing for leakages and opening of isolation valves. 26. tundish heating gear box repairs: dismantling, repair/bearing changing re-fixing of gearbox. 27. tundish heating system tie rod fixing/repairs: repair of tie-rod, welding of crank bush and connection to gearbox. 28. tundish car copy roller guide repairs: repair/fabrication and welding of copy roller guides. 29. tundish car hump repairs: dismantling and repositioning/re-conditioning of tundish car humps. 30. mould table top: cleaning of mould table top of mould oscillating mechanism (mom) from metal jam by gas cutting. replacing the damaged mould fixing bolts, mould adjustment bolts and eye bolts. 31. jam cleaning below mom: removing the bunker plate below the oscillating table and cleaning the metal jams below the mould table and oscillating lever. fixing back the plate after cleaning and ensuring that the oscillation is smooth. 32. dismantling, repair, reconditioning, erection of mom c-frame: dismantling of mom top link, arresting of counter weight link, dismantling of c-frame, repair of c-frame, dismantling of c-frame water connections, re-conditioning/replacement of bottom link shaft, fixing of c-frame, fixing of top link, connection of water lines and alignment of cframe with respect to level and machine axis using mould and section ethelons. 33. repair, alignment of c-frames w.r.t. sections: checking of mould c-frame with respect to axis of the strand, rectification of location of mould bed bolts blocks, straightening of c-frame arms, leveling of c-frame with respect to machine radius, arresting of water leakages. 34. dismantling, repair, erection of scz water seat block: dismantling of scz water seat block and removal of metal jam, repair of the block, removal of ms pipelines/joints if any and replacement with ss pipelines/joints, fixing of water seat block. 35. repair jobs on mom drive gear box: reconditioning of mom drive gear box including change of internals. alignment of drive frame with spirit level and master level. 36. repair jobs on eccentric unit: eccentric tie rod adjustment for smooth oscillation of the mechanism. adjustment of counter weights. 37. change of mom eccentric unit: dismantling of defective eccentric unit, fixing of reconditioned/repaired eccentric unit and adjustment of oscillation. 38. change of mom top link: arresting of mould c-frame, dismantling of mom top link, fixing of new top link, leveling of c-frame with respect to machine radius. 39. quarterly repair/rectification jobs on l&t stand: cleaning of all weld joints of turret area, checking of housing top flange bolts for looseness and measurement of gap with feeler gauge in presence of site engineer, cleaning of drive gear box area, checking of drive gear box flange bolts surface for any gap with feeler gauge, thorough cleaning of axle retaining covers of top and bottom links and measurement of clearances, rectifications as suggested by the engineer. 40. change of drive gear box of l&t stand: dismantling of drive room, dismantling of drive motor frames and motors, dismantling of gearbox, erection and alignment of drive motors and frames, erection of drive gearbox, erection of drive room and welding. 41. half yearly repair/rectification jobs on l&t stand: removal of floor covers, cleaning of all weld joints thoroughly for dp test, providing assistance for dp test as instructed by the engineer, rectification of defects noticed in dp test. 42. annual repair/rectification jobs on l&t stand: dismantling of floor covers, thorough cleaning of all weld joints of l&t stand, providing assistance for dp test, rectification of defects noticed in dp test, load test of l&t stand, measurement of deflection readings as per the instructions of the engineer, measurements of clearances of column foundation bolts, thermal tightening of column foundation bolts as per the instructions of the engineer, fixing of floor covers. 43. repair/change of l&t drive room: dismantling of drive room structures, fabrication/repair of drive room structures, erection, alignment and welding of drive room structures. 44. replacement of seals of l&t rotary joint: dismantling of rotary joint, dismantling of seals, thorough cleaning, reconditioning/repair of rotary joint, fixing of seals as per the sequence and as suggested by the site engineer. 45. repair of dummy bar conveyers: maintenance of all 24 dummy bar conveyors of ccm-1 to ccm-6 by carrying out the following jobs to keep the conveyors in working condition, replacing damaged conveyors along with parking rollers, grip assembly, replacing the damaged rope, repairing the hook carriage, rectification of front and back guides, channels of conveyor. repair of horizontal guides and other structural repair of conveyor, reposition of conveyor carriage assembly in support guides in case of any problem, removing the dummy bar if it is defective or for carrying out the repair of conveyor, repair/replacement of vertical guide channels, fabrication of small parts like hook carriage tie rod, stopper etc. 46. mom lever unit bearing changing: jobs including boq no 32 and boq no 33 removal of counter weights, mom lever unit bearing changing on both sides by removing plumber blocks and fixing the same along with counter weights. also oscillation checking and rectification. 47. tk1/tk spline welding: tk1/tk stands igb spline housing and welding both in position and removed stands if required. 48. igb changing for tk stand: igb removal from the stand and fixing, orientation changing of igb if required. 49. igb locking: tk1/tk stands igb locking with bracket along with spline welding to stand. 50. idle roller stand roller changing: removal of damaged roller, cleaning, new roller fixing. 51. ccm#2 mould supporting frame top link changing/revisioning: removal of top link, revision/changing of bearings in the top link, fixing of top link in the position. 52. ccm#2 mould supporting frame bottom shaft bearing changing/revisioning: removal of top link, mould c-frame, revisioning/changing of bearings/shaft, fixing of shafts, c-frame and top link. 53. total changing/revisioning of ccm#2 mould supporting frame: removal of mould c-frame, changing/revisioning of mould water seats, arresting water leakages from frame, revisioning of leveling pads, fixing of revisioned or spare stand. 54. total changing/revisioning of ccm#2 section supporting roller: removal of damaged supporting roller, fixing of spare/revisioned supporting roller. 55. total checking of ccm#2 alignment with section and mould ethelon: placement of mould ethelon, placement of section ethelon, checking the total radius with template from mould c-frame to n1, removal of both section and mould ethelon, radius correction to be done. 56. periodical maintenance of electric hoist in mom room of ccm: strictly follow the periodical maintenance schedule, gear box oil top-up, greasing of guide and guide wheels, tightening of foundation bolts.

Visakhapatnam, Andhra Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

13 |Bid Value:₹ 1.25 Cr. |EMD:₹ 2.50 Lakh |07-10-2026 20 Days Left|T247 ID-104366317

request for proposal (rfp) for engagement of charge point operators (cpos) for supply, installation, testing, commissioning, operation of electric vehicle charging stations at identified locations in mumbai

Mumbai, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

14 |Bid Value:₹ 1.18 Cr. |EMD:₹ Refer Docs |17-09-2026 Ending Today|T247 ID-104016274

Korea, Chhattisgarh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

15 |Bid Value:₹ 1.18 Cr. |EMD:₹ Refer Docs |21-09-2026 4 Days Left|T247 ID-104065094

Korea, Chhattisgarh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

16 |Bid Value:₹ 80.00 Lakh |EMD:₹ 1.60 Lakh |23-09-2026 6 Days Left|T247 ID-103912863

corrigendum : supply of - motor hood canvas - | quantity - 22406

Ranchi, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

17 |Bid Value:₹ 76.43 Lakh |EMD:₹ 1.09 Lakh |29-09-2026 12 Days Left|T247 ID-104130812

development of civil and electrical charging infrastructure for operation of electric buses in state of hp - sh construction of gi cover sheet shed cover for 1 no fast charger dug ware house construction of ladies toilet etc construction of boundary wall surrounding the workshop land etc at workshop 61 miles nagrota bagwan, distt kangra hp

Kangra, Himachal Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

18 |Bid Value:₹ 74.97 Lakh |EMD:₹ 1.07 Lakh |29-09-2026 12 Days Left|T247 ID-104130811

development of civil and electrical charging infrastructure for operation of electric buses in state of hp at dharampur bus stand and workshop distt mandi hp - sh construction of g.i cover sheet shed cover for 3 nos fast charger dug ware house

Solan, Himachal Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

19 |Bid Value:₹ 59.99 Lakh |EMD:₹ 1.20 Lakh |17-09-2026 Ending Today|T247 ID-103507046

corrigendum : set up of e-mobility lab - set up of e-mobility lab, development of cyber-resilient electric vehicle charging infrastructure and security control framework with diagnosis and vulnerability analysis.

Howrah, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

20 |Bid Value:₹ 54.32 Lakh |EMD:₹ Refer Docs |24-09-2026 7 Days Left|T247 ID-104189060

supply of - gear motor part no.939793 or equivalent , alternator part no.52726309 or equivalent , led light kit rhs part no.52677723 or equivalent , led light kit lhs part no.52677759 or equivalent , led working light part no.52658841 or equivalent , electronic module part no.319398 or equivalent , button part no.52573422 or equivalent , electronic accelerator pedal part no.52677280 or equivalent , sensor part no.52657758 or equivalent , sensor part no.52690374 or equivalent , module part no.52687872 or equivalent , wiper blade part no.746458 or equivalent , reverser part no.794722 or equivalent , filter tank part no.52717070 or equivalent , brake valve part no.52707570 or equivalent , rotating beacon light part no.52721773 or equivalent , reversing sound alarm part no.931557 or equivalent , battery lockout part no.705222 or equivalent , pump part no.912176 or equivalent , battery part no.batm12 or equivalent , wiring harness part no.52725273 or equivalent , speed sensor part no.795174 or equivalent , sensor part no.52576053 or equivalent , valve part no.673151 or equivalent , valve part no.501919 or equivalent , valve part no.688359 or equivalent , valve part no.726168 or equivalent - procurement of spares for manitou tyre handlers | quantity - 33

Korba, Chhattisgarh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

21 |Bid Value:₹ 52.89 Lakh |EMD:₹ 52.89 K |18-09-2026 1 Day Left |T247 ID-104205084

supply, installation, testing and commissioning of electric vehicle charging system with one year maintenance during defect liability period for karjat nagar parishad

Raigad, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

22 |Bid Value:₹ 45.16 Lakh |EMD:₹ Refer Docs |01-10-2026 14 Days Left|T247 ID-104214728

supply of - suspension disc, m196121&2, elecon , end disc hard faced, m196121&3, elecon , suspension bar, m196121&7, elecon - | quantity - 44

Ramgarh, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

23 |Bid Value:₹ 42.00 Lakh |EMD:₹ 48.35 K |28-09-2026 11 Days Left|T247 ID-104374367

arc for supply of consumables material required for firefighting services of na, gidc, and ankleshwar afff foam concentrate ( 3% ) for fire, fighting as per is-4989, part-2, brand; kv, fire/integrated./firechem make., 2, washers for 63mm delivery hoses is-, 937:1981 made of neoprene rubber, gum boot (full length) for use in all type, of chemical spillage - duckback make, only as per size required., pvc hand gloves - jayco or equivalent, smooth finish 100% cotton interlock, lining red/black color acid & alkaline, proof, fire man helmet hard hat is-, 2745:1983 - nomex / concord brand, made from reinforced fiber isi mark, with leather cover. to protect neck. with, chine belt., fireman helmet with torch - pelican, brand made in usa flame proof, approved for class i group c & d to be, used in hazardous area., safety goggles close type with side, shields built in or clip on indirect vents, goggles for chemical splash & mist., punk/ sunlong, spares valve for scba set of drager/, scott / msa/ sabre/ frenzy /, vijay/techno make as per requirement, spares - face mask for scba set of, drager / scott / msa / sabre/ frenzy /, vijay make as per requirement, spares valve for elsa set of drager /, scott /msa/ sabre/ frenzy / vijay, make as per requirement, spares face mask for elsa set of, drager / scott /msa/ sabre/ frenzy /, vijay make as per requirement, canister with face mask venus / jk /, jld panorma with full vision face mask, respirator which can be used with the, complete range of 5000 and 20,000 ppm, filters gives vapours and particular, matters the mask should be approved, by bis bearing isi mark., pvc suit chemical protective clothing, made of tyvek c which made of high, density polyethylene fiber with yellow, polymer coating on top for good, chemical splash protection three piece, suit., safety belt half udyogi / karam /, guard make isi mark is 3521, safety belt full body harness with, chest attachment, adjustable shoulder, and thigh straps and d ring confirms to, en 361 with ce mark / isi mark is 3521, udyogi / karam / guard make, folding stretcher - karam / guard, make as per approved standards, foam branch (10) is-2097:1983 max /, priyanka/ aaag make, foam branch (10x) is-2097:1983 essel, /kailash / priyanka/ aaag make, short branch (brass) isi mark essell, / priyanka/ aaag make, diffuser branch essel /kailash /, priyanka/ aaag make, triple purpose branch essel /kailash, / priyanka/ aaag make, rechargeable torch pelican, /brightstar/wipro - as per approved, standards, flame proof torch pelican, /brightstar - made in usa make as, per ul approved standards., ceiling hook (fireman hook) with, wooden handle as per is - 927;1981, fireman axe is-926:1985 - aaag /, supra make, bolt cutter taparia / any approved, standards, rope ladder 30 fts - garware make, as per standards subject to approval, delivery hose (63 mm), rrl type b,, isi marked, new age/ crc/ aaag /, priyanka make fire fighting hose pipe, bearing isi mark under is:636/1988,, having tac & mmd approvals &, approved by lloyds register [london], under bs:6391, and approved & listed, under ul-19 [usa],, 30 mtr ;length with ss / gun metal, coupling duly double copper binding, select o flow type , long range jet &, fog pattern gun type branch as per is , 903, make aaag / newage / priyanka, constant flow type , long range jet & fog, pattern gun type branch as per is 903,, make aaag / newage / priyanka, high expansion type mx foam branch (, made from ss - 304) with normal flow of, 225 lpm and 1: 35-40 expansion ratio, make aaag / newage / priyanka, high expansion type mx foam branch (, made from ss- 304) with normal flow of, 450 lpm and 1:35-40 expansion ratio, make aaag / newage / priyanka, rechargeable torch, long range of min., 100 m beam, self-contained air breathing apparatus, (scba) set ,, drager / scott /msa/ sabre/ frenzy /, vijay make only, life jackets ( for water rescue), lifebuoy ( ring for water rescue), handheld megaphone-pistol grip type, with variable sound siren up to 1,000m, in open air with built-in battery indicator, clean agent fire extinguishers, non, conductive of electricity and having zero, global warming (or ozone depletion), potential., suitable for: abc classes of, fire as per is 2878, max / kanex/ firecheck/intime, make, 2 kgs. capacity, clean agent fire extinguishers, non, conductive of electricity and having zero, global warming (or ozone depletion), potential., suitable for: abc classes of, fire as per is 2878, max / kanex/ firecheck/intime, make, 4 kgs. capacity, dcp (abc type) fire extinguishers is, 15683 : 2006, map (mono ammonium, phosphate) based powder as per is, 14609 , stored pressure type , 4 kgs., capacity, dcp (abc type) fire extinguishers is, 15683 : 2006, map (mono ammonium, phosphate) based powder as per is, 14609 , stored pressure type, 6 kgs., capacity, dcp (abc type) fire extinguishers is, 15683 : 2006, map (mono ammonium, phosphate) based powder as per is, 14609 , stored pressure type, 9 kgs., capacity, co type fire extinguishers having, specialised ccoe approved cylinder &, isi marked (is 7285), ccoe valves & isi, marked ( is 3224 ) as per is 15683 :, 2006, 4.5 kgs. capacity, extention bar 6, rachet handle, screw driver set, rechet set, manila rope (1 inch) in mtrs, manila rope ( inch) in mtrs, cotton rope (1 inch) in mtrs, fire proximity suit incl jacket, trouser,, hood, helmet, boot and gloves ( as per is, 7612 three layer) [nomex make], venus half face gas mask with multi gas, cartidge, v - 500 for acid, ammonia,, organic vapor, inorganic gases, venus full face gas mask with multi gas, cartidge, v - 500 for acid, ammonia,, organic vapor, inorganic gases, venus gas mask - double multi gas, cardtirdge, v - 7500 for acid, ammonia,, organic vapor, inorganic gases, fr jackets, constant flow hand controlled branch, 63 mm long range jet & fog pattern, universal branch (as per is)( aaag /, protecto), copper binding of female side, female adaptor for fire tender, copper binding of fire hose, heavy duty powder coated hose pipe, clamp (63 mm), male to male adaptor (63 mm), female to female adaptor (63 mm), cat hook big size, surgical handgloves powder free, fire hose rrl 'a' type (63 mm * 15, meter), chemical (nitrile) hand gloves - 14, wind socks (6 ft.), aaag make constant flow type long, range jet & fog pattern branch, petrol driven chainsaw (18), stihl/bosch make, chain (18 inch) for stihl/bosch make, chainsaw, reflective barricade tape roll( length 3m, , tape width: 48 mm), heavy duty leakproof isi marked fire, bucket made of mild steel conforming is, 2546 : 1974 capacity 10 liter, nrv for fire vehicle outlet (63 mm), fire blanket 5000 c size : 2 mtr. x 2, mtr.) protector / hicare/other, approved make, dcp - sodium bicarbonate base is-, 4308:2003, kv fire/fire chem/fire end, make. a finefire extiguishing foam, compitable dry powder highly free, flowing & water repellent treated with, special grade of imported silicon, compound/fluid and based on +90%, sodium bicarbonate, chain pipe wrench (900 mm), aluminium handle pipe wrench (95, mm), grease gun, ring type spanner set(6x7 to 30x32), double end spanner set (ribbed), (32x36 to 50x55), double end spanner set (ribbed), (50x55 to 75x80), double end spanner set (ribbed) (6x7, to 30x32), spirit level, allen key, allen key, universal joint, clampmeter (3-314 digital 6000 count,, 2000a dc/ac trms meter), clampmeter (3-314 digital 4000 count,, 1000a dc/ac trms meter), insulation testor (5 kv), hammer type 3 gear drill machine, grinder (cordless angle grinder), drum lifter, plastic tool box with organizer, bosch gdx 18 v-ec professional cordless, impact wrench, bosch impect wrench gds 30, professional, bosch wet/dry extractor gas 35l.

Ankleshwar, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

24 |Bid Value:₹ 34.95 Lakh |EMD:₹ 70.00 K |24-09-2026 7 Days Left|T247 ID-103996352

provision of electric vehicle charging station at mic and s, ahilyanagar - as per tender documents

Ahmednagar, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

25 |Bid Value:₹ 32.00 Lakh |EMD:₹ Refer Docs |28-09-2026 11 Days Left|T247 ID-104228695

supply of structural materials for hvds 16 to 25 kva dtr - pole mounting arrangement for 3-phase 25/16kva dtrs with 75x40 m s channel, strut with 50x50x6 m s angle and clamps with 50x6 m s flat.

Chittoor, Andhra Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

26 |Bid Value:₹ 24.69 Lakh |EMD:₹ Refer Docs |30-09-2026 13 Days Left|T247 ID-104160603

supply of - spring cap , suction hose , chain conveyor , drive shaft , idler shaft , sprocket , tensioning bush , bush , compression spring , idler assembly , end bracket , track chain , seal kit , shaft seal , cartridge , track roller - procurement od sdl spares | quantity - 43

Dhanbad, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

565+ Latest Metal Liner Tenders

Live Metal Liner Tenders 2026

Lucknow, Uttar Pradesh, India

Tiruchirappalli, Tamil Nadu, India

Tiruchirappalli, Tamil Nadu, India

Ahmedabad, Gujarat, India

Jabalpur, Madhya Pradesh, India

Chakradharpur, Jharkhand, India

Jaipur, Rajasthan, India

Jaipur, Rajasthan, India

Jaipur, Rajasthan, India

Jaduguda, Jharkhand, India

Lucknow, Uttar Pradesh, India

Visakhapatnam, Andhra Pradesh, India

Mumbai, Maharashtra, India

Korea, Chhattisgarh, India

Korea, Chhattisgarh, India

Ranchi, Jharkhand, India

Kangra, Himachal Pradesh, India

Solan, Himachal Pradesh, India

Howrah, West Bengal, India

Korba, Chhattisgarh, India

Raigad, Maharashtra, India

Ramgarh, Jharkhand, India

Ankleshwar, Gujarat, India

Ahmednagar, Maharashtra, India

Chittoor, Andhra Pradesh, India

Dhanbad, Jharkhand, India