formation and safety work s.no. item item qty qty unit unit rate basic value escl.(%) amount bidding code unit above/ schedule () b-carriage of materials, structural steel work, dismantling and 4301132.54 below/p demolishing ar please see item breakup for details. 5060155.93 (-) 15.00 4301132.54 2 description:- carriage of materials, structural steel work, dismantling and demolishing s.no. item item qty qty unit unit rate basic value escl.(%) amount bidding code unit above/ schedule () c-cement 254040.85 below/p ar please see item breakup for details. 254040.85 at par 254040.85 3 description:- cement s.no. item item qty qty unit unit rate basic value escl.(%) amount bidding code unit page 1 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 above/ schedule () d-steel reinforcement 540485.00 below/p ar please see item breakup for details. 540485.00 at par 540485.00 4 description:- steel reinforcement s.no. item item qty qty unit unit rate basic value escl.(%) amount bidding code unit above/ schedule () e-supply of ballast 76596480.00 below/p ar please see item breakup for details. 76596480.00 at par 76596480.00 5 description:- supply of ballast s.no. item item qty qty unit unit rate basic value escl.(%) amount bidding code unit above/ schedule () f-linking of track 63163978.55 below/p ar please see item breakup for details. 63163978.55 at par 63163978.55 6 description:- linking of track s.no. item item qty qty unit unit rate basic value escl.(%) amount bidding code unit above/ schedule () g-transportation of p.way material 25873451.55 below/p ar please see item breakup for details. 25873451.55 at par 25873451.55 7 description:- transportation of p.way material s.no. item item qty qty unit unit rate basic value escl.(%) amount bidding code unit above/ schedule () h-preparation of drawings and transportation of ballast 34233060.00 below/p ar please see item breakup for details. 34233060.00 at par 34233060.00 8 description:- preparation of drawings and transportation of ballast 3. item breakup schedule schedule a-formation and safety work item- 1 formation and safety work s no. item no description of item unit qty rate amount page 2 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 earthwork in cutting in formation, trolley refuges, side drains, level crossing approaches, platforms, catch water drains, diversion of nallah & finishing to required dimension and slopes to obtain a neat appearance to standard profile inclusive of all labour, materials, plant & machinery, leading all cut spoils either to make spoil dumps or for filling in embankment with leads within 2 km on either side of edge of the cutting(s) including all lifts, ascent, descent, loading, unloading, bailing & pumping out water, if required, clearance of site and all other works incidental thereto for completing the work as per rdso specification no. rdso/2020/ge: irs-0004 with latest updated correction slips and to the satisfaction of the engineer-in- charge. note: (i) all usable earth arising from cut spoils shall be led into bank formation and unusable spoils shall be dumped / stacked away from toe of embankment. (ii) all hard rock /and boulders not fit for filling will be stacked by the contractor and will be property of the railways. (iii)cut trees shall be property of railways and to be deposited in the railway godown unless specified otherwise in the conditions of contract. 1 012011 in all conditions and classifications cum 2500.00 104.10 260250.00 of soil except rock providing portable fencing along running track where work is to be done in close vicinity of track, maintaining during execution of work and removing after completion of the work as per direction of the engineer. fencing shall consist of self supporting steel angles of size 50mm x 50mm x 6mm, 1.5m long provided with hooks etc. and embedded in cc 1:2:4 block of size 0.23m x 0.23m x 0.23m placed at c/c distance of 2m along track. 12mm dia rods in three horizontal layers shall be tack welded with angle posts. note : released material will be property of the contractor after completion of work. cost of cement required for cc blocks shall be paid separately. 2 013041 with provision of one 50mm wide metre 17500.00 201.84 3532200.00 retro-reflective tape in horizontal direction, duly secured/tight with vertical posts. page 3 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 provision of barricading with contractor's bamboos / ballies vertical post of 100mm dia. planted at every 2m interval, projecting at least 1.5m above ground level and driven firmly (minimum 0.5m) inside ground and including painting verticals & horizontals with red luminous paints / strips at alternative bay on barricade. barricades shall be maintained through out the execution of the work and shall be removed in workman like manner on completion of the work only after instruction of engineer in-charge. note: (1) 60% payment shall be made on provision of barricading at work-site and balance 40% payment after removal of barricades. (2) the released bamboos / ballies shall be the property of the contractor. 3 013051 with 3 horizontal bamboo / balli rm 100.00 134.69 13469.00 members of minimum 50mm dia. spaced equally total 3805919.00 schedule schedule b-carriage of materials, structural steel work, dismantling and demolishing item- 2 carriage of materials, structural steel work, dismantling and demolishing s no. item no description of item unit qty rate amount 1.0 carriage of materials by mechanical transport including 1.1 loading, unloading and stacking 1.1.18 disposal of moorum/buildingcum 1181.92 494.1 583986.67 rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport 1 including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. 10.0 steel work 10.1s general 10.1 structural steel work in single kg 6000 117.35 704100 section, fixed with or without connecting plate, including cutting, 2 hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 15.0 dismantling and demolishing 15.1s general demolishing cement concrete manually/ by mechanical means 15.2 including disposal of material within 50 metres lead as per direction of engineer - in - charge. 15.2.1 nominal concrete 1:3:6 or richer mix cum 380.7 2434.25 926718.98 3 (including equivalent design mix) 15.3 demolishing r.c.c. work manually/ cum 801.23 3551.25 2845350.28 by mechanical means including stacking of steel bars and disposal 4 of unserviceable material within 50 metres lead as per direction of engineer - in- charge. total 5060155.93 schedule schedule c-cement page 4 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 item- 3 cement s no. item no description of item unit qty rate amount supply and using cement at worksite 1 025072 ordinary portland cement 53 grade mt 35.00 7258.31 254040.85 of approved brands/makes total 254040.85 schedule schedule d-steel reinforcement item- 4 steel reinforcement s no. item no description of item unit qty rate amount supply of steel reinforcement of approved brands/makes for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete. 1 025082 thermo-mechanically treated bars kg 5500.00 98.27 540485.00 of grade fe-500d or more of approved brands/makes. total 540485.00 schedule schedule e-supply of ballast item- 5 supply of ballast s no. item no description of item unit qty rate amount manufacturing, supply and stacking o f machine crushed track ballast conforming to rdso specification (irs-ge-1) with latest correction slips at railway depot or nominated location. note: distance of nearest quarry mentioned in each sub-item is only for the purpose of selecting the items for preparation of estimates/tender schedule, based on the minimum distance between nearest quarry and centre of supply points and will not affect the selection of quarry during physical supply in any way till prescribed specification is met fully. 1 085016 when distance of nearest quarry is cum 61000.00 1255.68 76596480.00 more than 50 km and up to 100 km total 76596480.00 schedule schedule f-linking of track item- 6 linking of track s no. item no description of item unit qty rate amount page 5 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 earthwork in filling in embankment, guide bunds, around buried type abutments, bridge gaps, trolley refuges, platforms etc. with contractor's own earth conforming to soil quality class sq1/sq2/sq3, after preparation of foundations as applicable, benching in existing banks wherever required, spreading in layers with motor grader, bringing the moisture content to omc, mechanical compaction to specified density and dressing of bank to final profile as per rdso specifications: rdso/2020/ge: irs-0004 with latest correction slips. note: 1) foundation preparation, benching including additional earthwork on account of this, wherever required, shall be paid extra under relevant schedule item for benching. 2) payment for earthwork under this item shall be made based on the cross section measurements calculated (i) with original ground profile of existing bank based on initial ground levels before doing benching and (ii) final profile of the bank worked out with final levels as per prevailing guidelines. 1 011033 using soil class sq3 cum 2000.00 303.99 607980.00 earthwork in excavation by mechanical means (hydraulic excavator)/manual means for foundations and floors of the bridges, retaining walls etc. including setting out, dressing of sides, ramming of bottom, getting out the excavated material, back filling in layers with approved material and consolidation of the layers by ramming and watering etc. including all lift, disposal of surplus soil up to a lead of 300m, all types of shoring and strutting with all labour and material complete as per drawing and technical specification as directed by engineer in charge. note: this item will be used for excavation work in connection with other miscellaneous works also like side drains, foundation for ohe masts and other miscellaneous structures in connection with gauge conversion, doubling, new lines. 2 022011 all kinds of soils cum 2000.00 189.63 379260.00 3 022012 soft rock (not requiring blasting) cum 200.00 387.70 77540.00 providing and laying in position plain cement concrete of specified nominal mix for miscellaneous works like side drains, foundation for ohe masts and other miscellaneous structures excluding the cost of cement, centering and shuttering - all work up to plinth level : 4 022032 1:2:4 (1 cement : 2 coarse sand cum 1250.00 2593.05 3241312.50 (zone-iii) : 4 graded stone aggregate 20 mm nominal size) page 6 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 5 022035 1:3:6 (1 cement : 3 coarse sand cum 300.00 2576.61 772983.00 (zone-iii): 6 graded stone aggregate 40 mm nominal size). pulling & positioning of rails accurately on cess including supporting rails, providing required gap and squaring at ends for renewal preparation, as directed by engineer in-charge. 6 061011 up to 40 m long rail panel rm 3200.00 7.89 25248.00 7 061012 more than 40 m long rail panel rm 41000.00 12.46 510860.00 dismantling and removing rail of all section & length from track, laid on any type & density of sleeper by removing fish plates, fastenings & fish bolts and other materials including stacking all released materials within an average distance of 500 metres as directed by engineer in-charge. note: 1.cutting of rails shall be paid separately. 2.work to be done under traffic block. 8 061021 for through rail renewal work trm 17200.00 38.70 665640.00 insertion of rails of all types & length in track, laid on any type & density of sleeper to the specified gauge under traffic block. rates include fastening of rail with sleepers with standard set of fastenings and fixing of fish plates and bolts or, if required, providing gap for welding and stacking of released material without infringement within 250m as directed by engineer-in-charge. note: rail drilling and cutting to be paid separately. 9 061031 for through rail renewal work trm 17200.00 39.90 686280.00 through sleeper renewal (tsr) with psc sleepers involving removal existing sleepers of any type along with fittings from track, insertion of psc sleepers lying along the cess / formation / slope / toe within 5 metres height with all fittings to specified spacing, gauge and squareness, one round of through packing to make track fit for 20 kmph speed, dressing of ballast to standard profile, all in accordance with the latest provisions of irpwm and stacking of all released material neatly at specified places within an average lead of 100 m as directed by engineer in-charge. 10 062013 for psc wider base sleepers - foreach 2300.00 307.99 708377.00 location of work not involving deep screening 11 062014 for psc wider base sleepers - foreach 500.00 171.67 85835.00 location of work involving deep screening. (deep screening to be paid separately) page 7 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 fixing of fish plates with fish bolts on a joint of all rail sections duly lubricating fish plates/bolts with contractor's grease graphite in running track condition including transportation of fish plates and fish bolts from nearest station / store / level crossing. note: rail cutting & drilling to be paid separately. 12 063011 fish plates with 4 fish bolts. joint 100.00 189.37 18937.00 13 063012 fish plates of 6 bolts. joint 600.00 276.37 165822.00 14 063020 through renewal of metal / gfnsleeper 3200.00 24.35 77920.00 liners in running track condition after cleaning of rail foot at liner seat, greasing of liner, liner seat and sealing of liner contact area at rail foot including removing, cleaning & lubrication of er clip & insert eye and re-driving the same with contractor's grease graphite of approved quality with all lead & lift. 15 063090 lubrication of ercs and its liner erc 20000.00 5.45 109000.00 contact area by removal of ercs and metal / gfn liners in rail panel, cleaning of rust / scale of erc, metal / gfn liners & sgci insert by using wire brush, scrapper / sand emery paper etc supply and application of graphite grease, as prescribed by railway for under side of liners & corresponding area of rail foot & sgci insert with ercs and re-fixing the same as per procedure prescribed in latest edition of irpwm with contractors grease and all other tools & plants complete and as directed. note: each erc in this item shall constitute 1 erc and its liner contact area. 16 063100 removing seized erc from sgci erc 6600.00 44.66 294756.00 inserts of existing track by using suitable approved chemicals and re- fixing after greasing of insert eye and erc with contractor's grease of specified quality as per provisions of irpwm, as directed by engineer in- charge. note: 1.list of seized erc along with location shall be prepared after inspection of sse/p.way and marked prior to execution of this item. 2. due care shall be taken to avoid any damage to the sleeper 3.a penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if sgci insert is broken or sleeper gets cracked in the process. 17 063110 lubrication of gauge face of rail on rm 14250.00 5.25 74812.50 curves, cross overs, points & crossings, turn-in curves and at locations as required with contractor's grease graphite grade "o" is 408 and as directed. gas cutting of rail of various sections with contractor's tools & plants, as directed by engineer in- charge : 18 064052 rail section of 52kg and above each 550.00 110.77 60923.50 page 8 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 assembling and laying of improved switch expansion joint (sej) on psc sleepers of any rail section as per rdso drawing including leading of sej rails, sleepers, fittings for a free lead of 250 metres, cutting of rails, drilling of holes as required and lubrication of sej, gauging, aligning rails, providing temporary connection with adequate welding gap with adjoining rails, providing reference posts at sej, first through packing of sej portion to make track geometry fit for 30 kmph speed and making ballast profile as per irpwm. note: (1) rail cutting and hole drilling shall be paid separately.(2) one set comprise complete sej on both rails at sej. 19 065031 under conditions not requiring set 8.00 5969.88 47759.04 traffic block 20 065032 under traffic block conditions set 20.00 6566.87 131337.40 21 065040 dismantling & removing existing sejset 14.00 8085.69 113199.66 (switch expansion joint) assembly during line block and its replacement with plain track as of adjoining section with all fittings including rail cutting and drilling of holes and renewal of special sleepers with psc sleepers as directed and aligning rails, providing fishplates and bolts/ temporary connection with adequate welding gap with adjoining rail and ensuring proper track geometry for 30 kmph speed. the release material shall be stacked as directed by engineer in charge. under traffic block: dismantling of existing bg turnouts, diamond crossings and derailing switches with all types of rails and sleeper layout, removing rails, switches, crossings, sleepers & fastenings, leveling of ballast to correct profile & stacking all the released materials, sleepers, fastenings, rails, switches & crossings including segregating & stacking at specified locations in a neat and countable manner, within the lead of 250m & all lift, clear of infringements, crossing of track, if any complete, as directed. note: 1. this item shall be operated only when existing turnout is replaced either with new turnout in case of ttr or with plain track when existing turnout is no more required at that location. 2. rail cutting will be paid extra under relevant item. 3. laying of new turnout or plain track on prepared ballast bed, as required, shall be paid separately under relevant item. 22 071011 1 in 8 turnout (under traffic set 5.00 26669.25 133346.25 block) 23 071012 1 in 12 turnout (under traffic block) set 5.00 30595.82 152979.10 24 071013 1 in 16 turnout (under traffic block) set 1.00 34537.12 34537.12 page 9 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 under conditions not requiring traffic block: dismantling of existing bg turnouts, diamond crossings and derailing switches with all types of rails and sleeper layout, removing rails, switches, crossings, sleepers & fastenings, leveling of ballast to correct profile & stacking all the released materials, sleepers, fastenings, rails, switches & crossings including segregating & stacking at specified locations in a neat and countable manner, within the lead of 250m & all lift, clear of infringements, crossing of track, if any complete, as directed - note: 1. this item shall be operated only when existing turnout is replaced either with new turnout in case of ttr or with plain track when existing turnout is no more required at that location. 2. rail cutting will be paid extra under relevant item. 3. laying of new turnout or plain track on prepared ballast bed, as required, shall be paid separately under relevant item. 25 071026 derailing switch (under conditionsset 2.00 4864.74 9729.48 not requiring traffic block). 26 071030 dismantling the existing bg buffer- set 3.00 3927.85 11783.55 stop laid with rails & wooden/st sleepers including leading the dismantled buffer stop materials to nominated places within station yard limits and stacking as material-wise and classification-wise duly releasing all fittings carefully without causing any damage with all contractor's labour, tools, with all lead and lifts, crossing of tracks if any, etc., complete as directed by the engineer-in-charge. assembling on temporary staging and insertion of all types of turnouts including diamond crossings and derailing switches on prepared ballast bed during traffic block, manually or by contractor's cranes, at specified location with 52kg / 60kg rail section on psc sleepers with railways rails/sleepers available anywhere within 500m as per standard drawing, duly leading sleepers, rails, switches, crossings, fastenings etc. including rail cutting, drilling, fixing of all components, fittings etc. with housing of tongue rails as per requirement of signaling including crossing of track, filling and spreading of ballast in crib and shoulder as required, linking of turnout with existing track, attending track parameters including lifting, providing one round of packing to make track fit for 20 kmph speed including lubrication of fittings/fastenings, complete in all respect and as directed by engineer in-charge. note: required p.way fittings shall be supplied at the sse/p.way stores. page 10 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 27 072032 1 in 12 turnouts set 10.00 60237.20 602372.00 28 072033 1 in 16 turnouts set 3.00 67068.21 201204.63 laying and linking of turnouts of all types including diamond crossings & derailing switches with 52kg / 60kg rail section on psc sleepers on prepared ballast bed for new lines or during total closure of section at indicated location as per standard drawing, duly leading sleepers, rails, switches, crossings, fastenings including rail cutting, drilling, fixing of all components, fittings with housing of tongue rails as per requirement of signaling, preparing ballast bed, filling and spreading of ballast as required, linking of turnout w i t h track, attending track parameters including lifting, providing one round of packing to make track fit for 20 kmph speed including lubrication of fittings/fastenings, complete as directed by engineer in-charge. 29 072042 1 in 12 turnouts set 19.00 44921.93 853516.67 30 072043 1 in 16 turnouts set 3.00 49056.82 147170.46 31 072046 derailing switch set 2.00 8599.93 17199.86 lifting the newly inserted bg 60 kg. / 52 kg. turnouts/ trap switches to required level to provide full ballast cushion as per approved drawings after initial laying with railway's stone ballast in convenient stages including one round of through packing after completion of final stage of lift, levelling, aligning, gauging and boxing to standard profile to make it fit for 20 kmph with all lead and lifts, complete in all respect and as directed by the engineer-in-charge. note: 1. the item shall be used only when unimat is not available for the work before the turnout is opened for operation. 2. leading and dumping of ballast will be paid separately under relevant item. 32 073022 for 1 in 12 points & crossing set 29.00 8574.84 248670.36 33 073023 for 1 in 16 points & crossing set 3.00 10945.67 32837.01 34 073024 for derailing switch set 2.00 5018.60 10037.20 page 11 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 manual deep screening of plain track/ turnouts under traffic as per procedure prescribed in irpwm, june 2020 or latest, in other than psc sleepers of any density and throwing away screened muck arising out of screening on toe of bank or on cess, if low or on spoil banks above top of cutting (including throwing and leveling, if required beyond minimum 5m from the edge of cutting which are up to 3m deep or alternatively carting it up to 50m for disposing it off beyond cutting or platforms) as per direction of engineer in-charge, including cutting cess for effective drainage on both sides, one round of kutcha packing with screened ballast and further attending to track parameter to make track fit for 20 kmph speed complete in all respect. note : payment shall be made for length along main line only for turnouts. 35 081013 depth of 250 mm below bottom oftrm 1400.00 357.10 499940.00 sleeper of plain track manual deep screening of plain track/ turnouts as per procedure prescribed in irpwm, june 2020 or latest, on psc sleepers of any density and throwing away screened muck arising out of screening on toe of bank or on cess, if low or on spoil banks above top of cutting (including throwing and leveling, if required beyond minimum 5m from the edge of cutting which are up to 3m deep or alternatively carting it up to 50m for disposing it off beyond cutting or platforms) as per direction of engineer in-charge, including cutting cess for effective drainage on both sides, one round of kutcha packing with screened ballast and further attending to track parameter to make track fit for 20 kmph speed complete in all respect. note : payment shall be made for length along main line only for turnouts. 36 081023 depth of 250 mm below bottom oftrm 800.00 444.55 355640.00 sleeper - for plain track : recoupment of ballast in running line with railway's stone ballast from existing stacks available along alignment either on top of cutting or on cess or at toe of bank by head leads or by any other means and spreading to make up deficiency in the required profile with contractor's labour, tools & plants, as directed by engineer-in-charge. note: payment shall be made based on ballast stack measurement. 37 082011 for average lead up to 50m and lift cum 1000.00 95.74 95740.00 up to 5m page 12 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 38 082012 extra over item no. 082011 for each each 1000.00 24.80 24800.00 additional average lead of 50m or part thereof when total average lead exceeds 50m, but up to 250m. note: this item may be used only in exceptional circumstance under prior order on record. 39 083010 lifting and packing for regrading thetrm 21250.00 154.00 3272500.00 existing psc sleeper track to required height / level in stages not exceeding 75mm or part thereof at a time, providing permissible ramp for the track, insertion of moorum / sand / stone ballast uniformly under the existing track and placing the same to safe approved gradient, gauge, cushion including levelling and one round of through packing to allow train movement at restricted speed of 30 kmph for a specified length with all leads & lifts and fixing, marking, painting rail level pegs at every 30m interval. note: lifting of track shall be done in stages as per procedure prescribed in latest edition of irpwm to get the proposed final level as per approved working profile, as directed by engineer in-charge. 40 083020 regrading the existing track by trm 200.00 533.39 106678.00 lowering up to required depth in stages by cutting the formation top maintaining the depth of existing cushion finally, not exceeding 75mm in one stage including one round of through packing and making track fit for 30kmph speed at each stage of lowering as per procedure prescribed in latest edition of irpwm and subsequent picking up of sags / slacks and attending to misalignment / cross level defects during train operation, providing required ramp-in and ramp-out for safe passage of trains, including cutting trenches across track at every 30m interval to the required final formation level complete, and fixing, marking, painting rail level posts, tie bars at every 30m interval as directed by engineer in-charge. note: the item shall be only operated only when formation is required to be cut for lowering of existing track. 41 083030 boxing and profiling of ballast as per trm 38450.00 22.66 871277.00 procedure prescribed in latest edition of irpwm including cess dressing on both sides of track. the work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by engineer-in charge. page 13 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 42 083040 removing, screening and salvaging cum 1000.00 266.73 266730.00 ballast from track, duly digging / scarifying ballast by beaters / wire brushes or any mechanical means, leveling and dressing formation with specified cross slope after salvaging ballast, separating muck by screening the salvaged ballast with contractor's 20mm size sieve, stacking of screened ballast for measurement, disposing off muck at specified locations with all lead & lifts as directed by engineer in- charge. note: payment shall be made for quantity of ballast stacked after screening of retrieved ballast from track. 43 084010 loading railway's ballast, collectedcum 5000.00 44.29 221450.00 at yard / depot into railway's bob / bkh / any other type of open wagon, using mechanical loader or any other method with all lead and lifts, as directed by engineer in-charge. unloading of ballast from railway's hopper wagons, quantity distribution as per pre-defined site requirement, clearing infringements/jammed ballast, distributing the unloaded ballast uniformly over the track, profiling and boxing following all prescribed safety norms. 44 084041 under traffic block conditions: cum 5000.00 45.35 226750.00 45 084042 under conditions not requiring cum 5000.00 34.45 172250.00 traffic block: page 14 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 25mm gap 'in-situ' welding during traffic block and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per ir's "manual for fusion welding of rails by alumino - thermic process" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint to original position and fixing of joggled fish plate at new weld, to be removed after passing of weld in usfd test as directed by engineer in charge. note: 1. welding shall be carried out only by trained welder having valid competency certificate using rdso approved alumino thermit welding portions, 3 piece prefabricated mould (zircon washed) manually pressed, single shot crucible fitted with auto tapping thimble and compressed air petrol/lpg preheating technique as per rdso specification no irst/19-2020 with latest amendment. 2. hydraulic weld trimmer shall be used for chipping and profile grinder for finishing. 3. only required nos. of joggled fish plates shall be supplied by railway at nearest p. way stores and the same shall be returned at nearest p. way store or at other location as per direction of engineer- in-charge after release from track. all other items required shall be supplied by the contractor. 46 092012 for 60 kg/60ei - r260 grade rail each 250.00 4020.86 1005215.00 47 092013 for 52 kg - 90/72 uts rail each 50.00 3942.86 197143.00 page 15 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 25mm gap cess welding and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with contractor's labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per ir's "manual for fusion welding of rails by alumino - thermic process" with latest correction slips, including all required handling and rehandling of rails, marking of welded joint, painting weld collar with anticorrosive paint, as directed by engineer in charge. note: 1. welding shall be carried out only by trained welder having valid competency certificate using rdso approved alumino thermit welding portions, 3 piece prefabricated mould (zircon washed) manually pressed, single shot crucible fitted with auto tapping thimble and compressed air petrol/lpg preheating technique as per rdso specification no irst/19- 2020 with latest amendment. 2. hydraulic weld trimmer shall be used for chipping and profile grinder for finishing. 48 092042 for 60 kg/60ei - r260 grade rail each 300.00 3064.59 919377.00 49 121010 dismantling of existing lwr/swrtrm 2550.00 157.56 401778.00 track of any structure, removing rails, sleepers, fish plates, cutting of rails, segregation and stacking of released rails, sleepers and fitting at nominated location in countable manner within a free lead of 500m, levelling of ballast to correct profile for laying new track over it, all as per direction of engineer-in-charge. 50 121020 dismantling existing sand humps in each 1.00 11524.99 11524.99 yards from end of turnout to end of sand hump. scope includes dismantling of track and brick / stone masonry on either sides of track, removing sand and earth to the required level including clearing site and stacking released materials within maximum lead of 250m, clear of infringement, complete and as directed. shifting & pairing of rails / panels unloaded alongside existing running track to adjoining formation of a new line including crossing of one track, duly lifting & pushing rail / panel without damaging it and taking all necessary precautions, so as not to infringe the running track, as directed by engineer in-charge. note: the rail barricading, if disturbed during working, should be restored to its original condition by the agency including re-fixing & concreting as required. 51 122012 rail length up to 13m - under rm 36100.00 13.98 504678.00 conditions not requiring traffic block 52 122015 for rails/panels of more than 40m rm 3500.00 37.21 130235.00 length - under traffic page 16 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 53 122016 for rails/panels of more than 40m rm 33000.00 26.43 872190.00 length - under conditions not requiring traffic block providing centre line / rail level, reference pegs on formation at an interval of 30 metres on one side or at centre of proposed / existing track, as directed by engineer in- charge for linking of new track / ctr / deep screening / lifting / lowering works, duly embedding in formation including marking with contractor's paint. note: (1) rails/tie bar of suitable size bar shall be supplied by the railways from nearest stores depot. in case of hard wood peg, the hard wood will be supplied by the contractor. (2) excavation and concrete work, if required, will be paid separately. 54 123011 with rail pegs each 1125.00 120.54 135607.50 55 123020 installation of reference points foreach 275.00 756.85 208133.75 track centre line in main and loop lines, in straight or curve portion, srj for turnouts, heel of crossing (hoc), locations of derailing switches, switch expansion joints etc. away from formation on firm ground at known offset with ms angles of 50mmx50mmx5mm thick of length 1.80 m each, founded in concrete block of size 30cm x 30cm x 45cm of nominal mix 1:3:6, including painting to reference pegs with two coats of enamel paints on exposed surface, as directed by engineer in charge. note: earth work and cement concrete will be paid under relevant items. 56 123030 spreading of ballast, from existingcum 61000.00 44.61 2721210.00 stacks available along formation on top or at cess, in required uniform thickness, compaction of ballast layer laid on new formation at all the locations with smooth wheeled power roller of 8-10 tonne capacity to sufficient number of passes to form consolidated ballast bed of approximately 250mm thickness to a width of 4m symmetrical to centre line of proposed track in correct line & level with all ascents & descents, as directed by engineer in-charge. note: item is inclusive of (a) providing ramp for taking roller to formation and removing the same & making good formation after completion of work; (b) redistribution & leveling of excess ballast while rolling to obtain uniform plane cambered surface. page 17 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 linking of bg track (except at lc, bridges and sejs) with any type of rail section and sleeper of specified density, on ballast bed spread and compacted with suitable roller, over prepared formation including leading free rails/welded panels available along the alignment on to formation, leading and spreading all fittings and fastenings, spreading of sleepers at specified spacing, squaring, placing of rails over sleepers and fixing rails to sleepers with all types of fittings and fastenings to correct gauge & alignment, lubrication of fittings and fastenings with contractor's grease as per irpwm standards with contractors labour, tools, consumables, with all lead, lifts etc. complete and raising, levelling and initial packing of track to make it fit for 30 kmph and meet other prerequisites prescribed in indian railway track machine manual for deployment of tamping machine. note: 1.rail cutting and hole drilling shall be paid separately. 2.spreading of ballast and compaction shall be paid separately under relevant item. 57 123041 for sleeper density of 1660 sleeperstrm 16100.00 255.83 4118863.00 per km 58 123042 for sleeper density of 1540 sleeperstrm 500.00 237.50 118750.00 per km 59 123050 linking of track at level crossing trm 30.00 383.16 11494.80 locations as per rdso drawings with any type of rail section and sleeper on prepared formation including leading free rails/welded panels available along the alignment on to formation, spreading of sleepers at specified spacing, squaring, placing of rails over sleepers and fixing rails to sleepers with all types of fittings and fastenings to correct gauge & alignment, excavating level crossing portion as necessary, fixing check rails to running rails, providing c.c blocks, chairs, anti corrosive painting to running rails and check rails, lubrication of fittings and fastenings with contractor's grease as per irpwm standards with contractors labour, tools, consumables, with all lead, lifts etc. complete and raising, levelling and initial packing of track to make it fit for 30 kmph and meet other prerequisites prescribed in indian railway track machine manual for deployment of tamping machine. note: rail cutting and hole drilling, if required, shall be paid separately under relevant item. page 18 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 60 123060 linking of bg track (with guard rail )trm 1150.00 371.16 426834.00 over ballasted deck bridges with any type of rail section and psc sleeper including leading free rails/welded panels available along the alignment on to bridge, leading and spreading all fittings and fastenings, leading & spreading of sleepers at specified spacing, squaring, placing of rails over sleepers and fixing rails & guard rails to sleepers with all types of fittings and fastenings to correct gauge & alignment, lubrication of fittings and fastenings with contractor's grease as per irpwm standards with contractors labour, tools, consumables, with all lead, lifts etc. complete and raising, levelling and initial packing of track to make it fit for 30 kmph and meet other prerequisites prescribed in indian railway track machine manual for deployment of tamping machine. note: 1.rail cutting and hole drilling shall be paid separately. 2.spreading of ballast and compaction shall be paid separately under relevant item. 3. this item shall be applicable only when track is with guard rail. linking without guard rail be paid under relevant item for plain track linking. 61 123080 carrying out cut & connection to theeach 2.00 55660.88 111321.76 existing psc sleeper track under line block of any rail section and sleeper density to connect the same to newly linked track which is laid by the side, duly carrying out cutting of rails, insertion of additional psc sleepers, if required, providing fish plated joints including drilling of holes, slewing required length of both tracks to prescribed alignment, adjusting sleeper spacing, providing continuity to track, spreading of ballast to provide cushion, shoulder ballast to the track stretch, giving one round of initial packing to make track fit for 20 kmph speed and boxing of ballast to profile as directed by engineer in charge. shifting / slewing the existing or newly assembled track of any rail section with any type of sleepers and any density under line block to correct locations & alignment and attending to one round kutcha packing to run safely at 20kmph speed with all contractors tools and consumables complete and as directed by engineer in-charge. 62 123091 maximum shifting / slewing up to 1 trm 1600.00 178.64 285824.00 metre 63 123092 maximum shifting / slewing for more trm 1200.00 214.40 257280.00 than 1 metre & up to 2 metres page 19 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 working of the railway push trolley by arranging one head trollyman along with 3 trollymen as per railway's rules and stipulations for conducting inspections by railway officials and as directed by engineer in-charge. note: 1) labourers supplied should be of skilled in case of head trollyman and semiskilled in case of trollymen and capable of pushing trolley in all gradients, and levels duly observing all safety precautions as per the manual. 2) the labour engaged should be physically fit for strenuous work, literate and meeting prescribed medical category. 64 124021 for full day (8 hrs ) each 300.00 2979.59 893877.00 providing caution watchman at a location where caution order is imposed and ensuring to be on continuous vigil and exhibit necessary hand signals to the trains for their passage over caution spot. note: 1) prescribed protection equipment shall be supplied by railways and the same shall be returned after work is over. 2) if contractor fails to post watchman at any time during one day, penalty at double the accepted rates will be levied and 3) the watchman nominated by the contractor will be screened for suitability as per railway norms. 65 124031 for one shift ( 12 hrs) each 550.00 1068.34 587587.00 preparation of completion drawings of yard in autocad, showing all the details, such as circulating area, approach road, platform shelter, platform, fob etc., showing relevant particulars to appropriate scale as per ir's engineering code on approved quality, transparent media as per details supplied by railways, including submission of check print for proof checking, duly incorporating the suggested corrections and modifications and supplying the final plot on approved quality & transparent media with six copies of ammonia prints complete and soft copy, as directed by engineer in-charge note: (i) drawings shall be prepared by using latest drawing making softwares autocad, work station etc. and printing shall be done on high end latest plotters. (ii) stage payment - (a) for check print - 40% (b) for paper tracing - 40% (c) for ammonia print & soft copy - 20%. 66 124041 completion drawing of yard ateach 3.00 6709.76 20129.28 junction station 67 124042 completion drawing of building each 2.00 4716.23 9432.46 68 124043 completion drawing of land plan kilometre 15.70 4676.09 73414.61 69 124044 completion drawing of way side each 2.00 2642.43 5284.86 station page 20 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 through packing of track, as per procedure prescribed in latest edition of indian railways permanent way manual 70 131011 for psc sleeper track with sleeper trm 25200.00 89.98 2267496.00 density of 1540 sleepers/km or more picking up of slacks in track of all sleeper density, duly opening up ballast, gauging, alignment, correcting longitudinal & cross levels, packing, boxing of ballast and dressing the same under traffic conditions as per procedure prescribed in latest edition of irpwm and as directed by engineer in- charge. note: in-charge section engineer should identify locations requiring packing and obtain prior approval of den/xen before execution of the work when there is no zonal track maintenance agency deployed in the section. 71 131021 for psc sleeper trm 2000.00 77.12 154240.00 first or second through packing of track of all sleeper density including giving a general lift, as desired to eliminate sag after deep screening work, lifting of track, lowering of track and major realignment of curves and formation rehabilitation as per procedure prescribed in latest edition of irpwm. note: general lift is normally 25 mm and isolated lift may be up to 50 mm. 72 131031 for psc sleeper track with sleeper trm 1000.00 107.97 107970.00 density of 1540 73 131032 for psc sleeper track with sleeper trm 49400.00 118.77 5867238.00 density of 1660 third or subsequent through packing of track for all sleeper density including picking of slacks, as required after second through packing, subsequent to deep screening work as per procedure prescribed in latest edition of irpwm. this item can also be used after lifting/regrading/realignment works also. note: general lift is normally 25 mm and isolated lift may be up to 50 mm. 74 131041 for psc sleeper track with sleeper trm 500.00 83.06 41530.00 density of 1540 75 131042 for psc sleeper track with sleeper trm 17500.00 91.36 1598800.00 density of 1660 page 21 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 through packing of points and crossings, derailing switches including gauging, fittings recoupment, ballasting as required, elimination of sag and to the required alignment after deep screening as per procedure prescribed in latest edition of irpwm complete as per direction of engineer-in-charge. note: this work shall be operated in exceptional cases with written approval at den level when unimat is not available and immediate packing is required to pass train over it. 76 131052 1 in 12 psc layout set 29.00 12857.58 372869.82 de-stressing of lwr/cwr track of any density under traffic line block with contractor's labours, tools, equipments and consumables inclusive of all lead & lift. activities include cutting of lwr/cwr into convenient panels of specified length, removal of ercs, liners, greasing of ercs and liner contact area, lifting rails and keeping them on rollers provided at every 15 sleepers, working out elongation of rail ends depending on prevailing site conditions, pulling rails with the help of hydraulic tensor to achieve the desired elongation, cutting rails, as required, removing rollers and placing rail in position, re-fixing ercs & liners and adjustment of gap at sejs : note: (1) welding of rail joints will be paid separately. (2) rail cutting and hole drilling shall be paid separately. (3) opening and closing of lc if required will be paid separately. (4) as per procedure prescribed in latest edition of irpwm & ce's circulars for destressing of lwr/cwr, if any. 77 135012 with contractor's hydraulic railtrm 20400.00 46.48 948192.00 tensor fixing joggled fish plates with bolt / clamp (supplied by railway from nearest sse store) in running track conditions at welds on rail, as directed by engineer in-charge (drilling of holes in rail, if required, shall be paid separately). 78 136011 with 2 bolts set 200.00 95.33 19066.00 79 136013 with clamps set 100.00 135.75 13575.00 maintenance of track on main line & loops, points & crossings etc. including special attention to section for carrying out various maintenance works listed in indian railways p.way manual / bridge manual for safe running of goods and passenger trains with contractor's tools / labours etc. complete, as directed by engineer in-charge. note: contractor shall arrange one gang at any point of time comprising of minimum specified labours with sufficient experience in p.way working. page 22 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 80 136042 one gang comprising of 20 gang 540.00 13283.05 7172847.00 physically fit labours plus 1 mate. day note: in case, contractor provides less no. of labour/mate, payment will be deducted for each such labour @ 10% of the accepted item rate. 81 136060 replacing existing glued joint rail each 400.00 1567.39 626956.00 with cut rails or with glued joint rail or insertion of glued joint by cutting existing track under traffic condition by cutting rails, refixing with all rail sleeper fastenings and providing required gaps for carrying out welding as an alternative to drilling holes or joining rails with fish plates duly drilling holes as required including stacking of released material and as directed by engineer in-charge. note: (1) drilling holes & rail cutting will be paid separately. (2) transportation of materials to the site of work from supply points, if more than 250m, shall be paid separately. fixing of wooden distance block of size 1.0m x 0.3m x 0.15m between track and platform wall. 82 136072 with contractor's hard wood block. each 80.00 2239.07 179125.60 83 136080 drilling holes of 16mm to 22mm dia. each 500.00 257.55 128775.00 on all types of psc sleepers and fixing the dowels with adhesive of rdso approved quality for fixing check rails & guard rails, as directed by engineer in-charge. 84 136090 cleaning of side drains along the rm 2000.00 27.86 55720.00 track including disposing of muck beyond railway boundary as per instructions of engineer in-charge to keep drains clean and clear in cuttings etc. 85 136100 removing weeds & bushes in ballast trm 2000.00 12.82 25640.00 section and cess up to 3.95m from centre line of track in mid section & station yard, as specified by engineer in-charge including disposal of branches, bushes outside cess/yard. page 23 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 86 136120 making kutcha trapezoidal side drain rm 1000.00 109.99 109990.00 of bottom width as 300mm and depth of 450mm in cutting section by excavation in all types of soil including utilising excavated muck for dressing of cess, slopes etc. in railway land. providing assistant to patrol man for patrolling during cold / hot weather on track for protecting track as per irpwm. note: 1.the person deployed for patrolling must have the following items: valid certificate of competency issued by railways. fit for a-3 medical category - certificate issued by registered medical practitioner 2.necessary equipments prescribed shall be supplied by railways for each patrolman and same to be handed over back to railways in good condition. 3.the following equipment t o b e arranged b y contractor for each patrol man: h.s.flags green -1 no (standard size), h.s flags red- 2 nos. (standard size),torch light 3 cell -1 no., staff for flags -1 no., whistle thunder - 1no, protective clothing to withstand climate, gum boots, haver sack. 87 136131 for duration of 8 hrs. each 540.00 741.22 400258.80 providing assistant to patrolman for monsoon / security patrolling whenever required for protection of track as per irpwm (for a duration of 12 hours).note:1.the person deployed for patrolling must have the following items: valid certificate of competency issued by railways. fit for a-3 medical category - certificate issued by registered medical practitioner.2.the equipment supplied by railways shall be handed over back to railways in good condition: 3.the following equipment to be arranged by contractor for each patrol man: h.s.flags (standard size): green - 1 no. & red - 2 nos. torch (3 cell) - 1no.; staff for flags - 1no.; whistle thunder - 1no. protective cloth to withstand the climate; gum boots; haver sack 88 136141 for day shift each 100.00 741.22 74122.00 89 136142 for night shift each 100.00 921.50 92150.00 anti-corrosive painting of rail outside track on rail bottom, web, foot and fishing plane with two coats of thickness of 100 microns each by bituminous black paint confirms to is-9862 of reputed make including surface preparation, as a complete job as per procedure prescribed in latest edition of irpwm. 90 137011 for 60 kg rails rm 5750.00 47.27 271802.50 page 24 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 marking, inscribing, painting, writing, bordering etc. on new / old iron surface at various locations of points & crossings with details of turn-in / turn-out reference station mark on rail web for one set, duly preparing surface with contractor's wire brush and applying two coats of yellow synthetic enamel paint of approved quality as background and stenciling the details to suitable size, as described for every curve reference station mark / switch / crossing details with black enamel paint of approved quality complete, as directed : note: stenciling of letters is only permitted. no hand written letters are accepted. 91 137071 1 in 16 turnout set 3.00 1671.42 5014.26 92 137072 1 in 12 turnout set 29.00 1110.71 32210.59 93 137074 derailing switch set 2.00 358.63 717.26 painting 2 coats to various p.way reference post, structures etc. with enamel paint of approved make with 2 coats of different colours & letters, as directed by engineer in-charge. 94 137081 kilometre & gradient post each 80.00 85.27 6821.60 95 137086 curve post each 40.00 90.22 3608.80 96 137090 curve details, se, versine, station each 700.00 48.42 33894.00 nos. etc. per station. dismantling of existing turnout by removing switches, rails, crossings, check rails, sleepers and all fixtures and stacking all released materials, removing ballast and muck by excavating up to required depth, preparation of formation bed, laying of pre assembled turnout by railway's t-28 machine, linking of track with all fittings, filling up of ballast duly screened, packing, adjusting, opening & housing of switch, testing operation of switch assembly and attending track parameters, so as to make track fit for 20 kmph speed including disposing off muck to indicated places up to free lead after the block working etc. complete. note: rate includes making necessary preparation for t-28 machine movement like preparation of approaches, transportation and laying of wooden sleepers/blocks, etc. 97 153011 1 in 8 turnout each 8.00 45835.60 366684.80 98 153012 1 in 12 turnout each 6.00 52764.51 316587.06 page 25 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 carrying out pre-tamping, during tamping and post-tamping work for tamping track with all types of rails, sleepers & sleeper density by various track tamping machines, like csm,duo/3x machines which include : (1) re-adjustment of ballast, heaping-up of ballast, filling- up of cavities in tamping zone by picking ballast from stacks / shoulders / crib of adjoining track up to lead of 50 m to ensure effective packing; (2) clearing of ballast on sleepers to make them visible to operator, (3) clearing of ballast over rail foot to facilitate holding of rail by rollers of ttrm; (4) digging, screening and replenishment of ballast at mud pumping / rounded ballast in sleeper crib location; (5) tightening of loose fittings immediately before & after tamping; (6) replacement of broken / missing fittings supplied by railway; (7) correcting displaced sleepers to position along with squaring; (8) re- setting of worked-out / fallen fittings. (9) removing and re-fixing joggled fish plates & wooden blocks, wherever necessary; (10) manual consolidation of ballast in crib / shoulders; (11) removing and refixing of traction bonds during the block in electrified sections (12) dressing of ballast note: 1. tamping blocks are not identical & it may be given at any time either during day or night. 2. stages of payment a) 30% of the rate will be paid on completion of pre tamping attention, b) balance 70% of the rate will be paid on completion of post tamping. 3. recovery at the rate of twice the above applicable rate will be effected in case contractor fails to carry out pre/during/post operation. 4.payment shall be made only once in irrespective of numbers of ttrm packing round and after restoration of normal speed and restoration of complete ballast profile. 99 155011 for day time block working trm 19600.00 16.42 321832.00 100 155012 for night time block working trm 800.00 18.40 14720.00 101 155013 new line section, not opened for trm 38450.00 9.00 346050.00 traffic page 26 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 pre, during & post tamping operations, for tamping of track on level crossing portion on all types of track structure and density, during traffic block, duly opening the road surface by digging up to the required width and up to 50mm below bottom of sleeper to facilitate tamping, removing and refilling ballast, adjustment of deficient ballast if necessary by picking from adjoining track/shoulder/cribs, removing and refixing all inter locking gears interfering, removing and re-fixing of check rails and painting of running rail & check rail with coal tar emulsion, completing road surface to smooth motorable condition after tamping is over, including tightening of loose fittings, replacement of broken/missing fittings, correction of displaced sleepers to correct position and as directed by engineer in charge. 102 155021 level crossing with asphaltedsqm 200.00 327.10 65420.00 surface 103 155022 level crossing with cc block surface sqm 200.00 282.65 56530.00 104 155030 removing and refixing of guard rails trm 200.00 91.01 18202.00 over slab bridges during machine packing with all contractor's men and materials duly removing fittings, leading guard rails to bridge approaches, lifting, dragging, positioning and crossing of track etc, and as directed by engineer in charge. page 27 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 carrying out pre-tamping, during tamping and post-tamping works for tamping of turnouts of all types under traffic block conditions which include :(1) re-adjustment of ballast, heaping-up of ballast, filling- up of cavities in tamping zone by picking ballast from stacks / shoulders / crib of adjoining track up to lead of 50 m to ensure effective packing; (2) clearing of ballast on sleepers to make them visible to operator; (3) clearing of ballast over rail foot to facilitate holding of rail by rollers of unimat; (4) digging, screening and replenishment of ballast at mud pumping / rounded ballast in sleeper crib location; (5) tightening of loose fittings including check rails immediately before & after tamping; (6) replacement of broken / missing fittings supplied by railway; (7) correcting displaced sleepers to position along with squaring; (8) re-setting worked-out / fallen fittings; (9) removing and re- fixing joggled fish plates & wooden blocks, ohe bonds & other obstructions, wherever necessary ; (10) removing and re-fixing stretcher bar, as directed; (11) adjustment in opening and housing of switch for testing operation of points (12)manual consolidation of ballast in cribs and shoulders; (13) stages of payment a) 30% of the rate will be paid on completion of pre tamping attention, b) balance 70% of the rate will be paid on completion of post tamping; (14) recovery at the rate of twice the applicable rate will be effected in case contractor fails to carry out any of the pre/during/post operation. 105 156012 1 in 12 turnouts (under traffic block set 29.00 9376.40 271915.60 conditions) 106 156013 1 in 16 turnouts (under traffic block set 3.00 12188.88 36566.64 conditions) 107 156015 derailing switch (under traffic block set 2.00 2969.59 5939.18 conditions) extra over item numbers 156011 to 156015 for night block working 108 156021 extra to item no. 156011 for night set 2.00 1208.66 2417.32 block working 109 156022 extra to item no. 156012 for night set 10.00 1406.46 14064.60 block working carrying out pre-tamping, during tamping and post-tamping works prescribed in current version irtmm/irpwm for tamping of turnouts of all types under conditions not requiring traffic block. 110 156031 1 in 8 turnouts set 2.00 4834.64 9669.28 111 156032 1 in 12 turnouts set 19.00 5625.84 106890.96 112 156035 derailing switch set 2.00 1781.75 3563.50 page 28 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 113 157010 carrying out various miscellaneous shift 170.00 1198.79 203794.30 works, for proper upkeep of crew rest van / rest room as directed by machine in-charge of track machines by providing a team of 2 labours for 12 hours shift, broadly mentioned hereunder: (1) bringing water from nearby source and cleaning machine with water jet or any suitable means; (2) fuelling machine duly bringing diesel / hydraulic oil from the stacked drums; (3) bringing water to staff rest van or staff rest room, cleaning rest van / rest room, cooking food for track machine staff or bringing food from outside (cost of food shall be borne by the staff concerned).; (4) guarding & watching machines, spare parts, oils, grease etc. during day and night time at all locations, wherever necessary, as instructed by the machine in-charge; (5) in case, contractor provides less no. of labour/mate, payment will be deducted for each such person @ 75% of the accepted item rate. 114 157020 carrying out ancillary worksshift 30.00 1970.65 59119.50 required for utv working under line block i.e., turning of rails/ sleepers and keeping in position for fixing of utv clamps to rail, keeping rails/psc sleepers in position while loading into bfr, removal of clamps on bfr for releasing loaded rail/sleepers, adjusting of rails/sleepers on bfr etc. by providing minimum of three men in a shift of 8 hours, with all contractor's tools, all lead, lift, crossing of tracks etc., complete and as directed by the engineer - in - charge. note: in case, contractor provides less no. of labour, payment will be deducted for each such person @ 2/3 rd of the accepted item rate. providing lighting arrangements with halogen lamps on and around machine during machine working in night time blocks, with contractor's generator, consumables, all necessary electrical fittings, operators etc. note: 1. lighting arrangement is to be provided as per advance planning of night blocks and written communication. 2. in case lighting arrangement is made available but not used due to non-availability of block, payment @ 60% of the item rate shall be made. 3. in place of halogen, led lamps of equal lumen capacity may be used with the approval of engineer -in- charge. 4. if lighting arrangement fails during block, recovery shall be made twice the rate per day. 115 157031 bcm/frm/unimat (7.5 kva night 100.00 3524.13 352413.00 generator and 12x500 w) 116 157032 csm / duo / 3x with or without dgsnight 20.00 3310.06 66201.20 (7.5 kva generator and 8x500 w) page 29 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 quick cutting with abrasive rail cutter of all types of rail sections including wear resistant, head hardened rails up to 110 uts, with contractors tools & plants, equipment, consumable with all lead & lift etc. complete as directed by engineer in-charge. abrasive rail cutter will be as per rdso specification no. tm/sm/1 (rev. 01 of 2012) with latest status of rdso; rail cutting wheel abrasive disc will be as per rdso specification no.tm/sm/2 (rev. 01 of 2020) 117 161011 60 kg - 110/90 uts - outside track each 6300.00 212.20 1336860.00 118 161012 52 kg - 90 uts - outside track each 700.00 191.50 134050.00 119 161013 52 kg - 72 uts & other rails -each 500.00 116.22 58110.00 outside track 120 161014 60 kg - 110/90 uts - on running each 1100.00 270.31 297341.00 line 121 161015 52 kg - 90 uts- on running line each 100.00 219.15 21915.00 drilling holes of 16 mm to 32 mm dia. with rail drilling machine including chamfering with appropriate chamfering tools in all types of rail section with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by engineer in-charge. rail drilling machine will be as per rdso specification no. tm/sm/3, dated 24.04.1991. 122 161041 outside track each 16550.00 50.55 836602.50 123 161042 on running line each 3850.00 64.84 249634.00 124 163010 measuring of toe load of erc during each 1200.00 3.65 4380.00 service in field by toe load measuring device (mechanical) with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by engineer in-charge. toe load measuring device (mechanical) will be as per rdso's specification no. tm/sm/14 (rev. 01 of 2005 with all updation). 125 163020 measuring of toe load of erc during each 500.00 4.08 2040.00 service in field by electronic toe load measuring device with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by engineer in-charge. electronic toe load measuring device will be as per rdso's specification no.tm/sm/etlmd/218 dated 13.9.2012. page 30 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 126 181010 opening of level crossing up to sqm 150.00 316.85 47527.50 required width from centre line of track for replacement of sleepers by digging of pucca road surface up to bottom of sleeper, removing of ballast, muck etc., screening of ballast & stacking the same near level crossing and disposing of all debris, replacing the required sleeper duly packing the sleeper to make fit for normal traffic and closing of lc surface with screened ballast to original level by proper ramming and consolidation to smooth motarable surface as directed by engineer in-charge. 127 181020 dismantling existing check rail ofrm 100.00 156.93 15693.00 level crossing, blocks, bolts & nuts and stacking these in a countable manner near lc, free from any infringements as directed by engineer in-charge. 128 181030 dismantling exiting rail heighteach 2.00 3149.51 6299.02 gauge carefully and stacking the released material in countable manner, free from any infringements as directed by engineer in-charge including removal of cement concrete foundation and making surface clean. 129 181040 dismantling existing lifting barrierset 2.00 16581.06 33162.12 along with winch assembly and other components like boom, fringes, locking arrangements, pedestal, boom rest, locking rods/wires, pulley stakes, turn out wheels, 'a' base and other materials connected with functioning of lifting barrier, removing engineering indicators on track and level crossing road signages without any damage including demolishing concrete base of existing structures, filling, ramming and levelling the ground disturbed during demolition, clearing debris and stacking all released material in a neat and countable manner and clear of infringements, as directed. note: barriers on both sides of level crossing constitute one set. page 31 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 130 183020 fabrication including cutting, trm 205.00 942.22 193155.10 bending/machining and fixing of check rails of all rail sections over psc sleepers as per railway's approved drawings & specifications for level crossings / trolley paths/inspection lines in yards duly cutting rail flanges, wherever required to correct alignment and level, drilling of holes with machine in check rails and fixing to running rail and sleepers with all railway's fittings, e.g. rail screws / grip expansion bolts, brackets, packing pieces, bolts, washers etc including grinding of brackets if required, fixing of railway's wooden blocks at flare ends duly cutting and plaining, crossing of tracks and as directed by the engineer in-charge note: 1. drilling of holes in psc sleeper and fixing of dowels shall be paid under relevant item. 2. required p.way materials will be supplied at sse/p.way stores. 131 183030 cutting foot of rail by gas or anyrm 325.00 133.35 43338.75 other approved method for check rails and grinding sharp edges into smooth profile. payment shall be made for length of cutting of foot. 132 183040 fixing check rails to running rails on set 2.00 4341.61 8683.22 level crossings with ms brackets, ms packing plates, bolts & nuts, spring washers etc. including lubrication as per approved drawing & specifications, as directed. rails, ms brackets, packing plates, bolts & nuts, spring washers will be supplied by railways. note: one set consists two check rails. 133 184010 painting of running rails and check rm 30.00 41.20 1236.00 rails of any rail section of level crossing with anti-corrosive paint on both sides of web, foot etc. including liner contact area (excluding bottom of foot) and fishing plane with two coats of thickness of 100 microns each by bituminous black paint confirms to is-9862 of reputed make including painting of liners, erc surface preparation, i.e. cleaning with wire brush / sand paper as a complete job as per para no 613 (2) (b)(iii) of indian railways permanent way manual, as directed by engineer in-charge. 134 185010 dismantling of existing rail fencing, mt 120.00 1195.19 143422.80 fixed adjoining running lines of track, duly excavating and levelling the foundation by hand compaction, removing connections and carting the released material up to a lead of 250m by suitable means and stacking the same, as directed by engineer in-charge. note: the released materials shall be handed over duly stacking the same in measurable fashion. page 32 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 135 185020 dismantling existing whistle boards each 6.00 159.35 956.10 along with post including demolishing base concrete and levelling of ground, stacking released materials at the level crossing concerned including clearing of debris, with contractor's labour, tools, vehicles, consumables, all lead and lift etc., complete without damage as directed by the engineer-in-charge. providing rail height gauge at approaches of level crossings as per approved drawings in cement concrete foundation using railway's rails of all sections including cutting, bending, drilling holes, erecting in position with clamps, bolts & nuts including painting with one coat of enamel paint of specified colour over one coat of primer. note: excavation and concrete work will be paid separately. 136 185032 above 5 metre width of leveleach 7.00 10485.42 73397.94 crossing 137 185050 manufacture, supply, assembly, each 2.00 53116.13 106232.26 erection, commissioning and testing of winch arrangement for operation of level crossing lifting barriers, as per rdso's approved layout, having standard covering arrangement, foundation of 'a' type as required and pulleys, pulley guides & stakes, horizontal rope wheel, vertical rope wheel, wire adjusting screws, wire ropes 6 x 6 x 19 with all fittings, fixtures & accessories to rdso's approved drawings with all parts including painting of steel work as per specification, as directed with cement concreting complete. note: excavation and concrete work will be paid separately. manufacture, supply, assembly, erection, commissioning and testing of auto boom locking arrangement for existing lifting barriers, consisting of interlocking ground frame near gate lodge, foundation of 'a' type, as required and connecting ground frame to lock posts of gate booms with stipulated rodding on guide rollers, supported on trestles including required excavation, foundation, providing rcc np-2 class pipes of 100mm dia. for road / rail crossing, as per rdso's drawings complete (excavation, concrete work and np-2 pipe will be paid separately). 138 185062 double lever each 2.00135217.33 270434.66 page 33 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 manufacture, supply and replacement of one side of level crossing of existing railway's lifting barrier assembly and boom supports of different boom length including required excavation & concreting foundation of 'a' type, as required for pedestal bases & fixing it on boom supports, painting iron works with two coats of synthetic enamel paint over one coat of primer of approved quality & colour and setting lifting barrier for smooth operation complete and as directed.note: excavation & concrete work will be paid separately. 139 185071 up to 6m long lifting barrier each 2.00 65270.62 130541.24 140 185072 above 6m and up to 8m long lifting each 2.00 85757.79 171515.58 barrier 141 185080 manufacture, supply and each 2.00 5378.51 10757.02 replacement of gate lamps at one side of level crossing 142 186070 manufacture & supply of tested gikg 50.00 468.28 23414.00 wire rope of 6mm dia. and 6 ply to suit lifting barrier gates at nearby p.way stores / depot / level crossing gate, as directed. 143 186080 supplying and fixing of boom each 2.00 1723.93 3447.86 supports (stay wires) for lifting barrier (approx. 8mm dia.) with suitable adjuster and other specials, as directed 144 186090 manufacture and supply of vertical /each 8.00 1873.11 14984.88 horizontal turnout wheels and shafts, mounted over base plate weighing not less than 6 kg with supporting vertical base, made of ms angle 75mm x 75mm x 10mm as per railway's approved drawings and specifications complete and as directed. 145 186100 manufacturing, supplying and each 8.00 589.23 4713.84 installation of pulley with pulley stakes complete, wire rope 6 x 6 x 19 with accessories as per railway's approved drawings for operation of lifting barriers complete, as directed. 146 186120 supplying and driving into ground 'c'set 2.00 464.40 928.80 class g.i. pipes of 20mm dia. x 150mm length for planting red flags and lamp at 5 metre on both sides from the centre of road at level crossings with all leads & lifts. payment shall be made for complete work at one level crossing. note: two pipes make one set. 147 186130 manufacturing, supplying andeach 4.00 2819.97 11279.88 installation of turnout wheel - horizontal rope wheel - double wire (2-way) including guides with all contractor's materials, fabrication, labour, t&p, consumables, all leads & lifts etc. complete as per approved drawing and as directed by engineer in-charge. page 34 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 148 186150 fabrication, supplying and fixing each 3.00 4366.55 13099.65 stop boards of 600mm dia. to lifting barriers as per approved drawing, made of 3mm thick plate, using ms clamps, providing 6 nos. of 50mm dia. red retro-reflector on stop board, painting iron works with two coats of synthetic enamel paint over one coat of primer of approved quality & colour and writing stop mark over the board. 149 186160 manufacturing, supplying and fixing mt 2.00108917.07 217834.14 wicked gate of size 1025mm x 1025mm x 1000mm at manned level crossings, as per approved drawing including painting with 2 coats of specified enamel colour paint over 1 coat of primer including earthwork in excavation etc. complete, as per specifications and as directed. fixing of wooden blocks of approximate size of 150mm x 300mm x 1200mm on end of check rails including sizing at level crossings with contractor's labour, tools & plants and as directed. 150 186172 with contractor's hard wood block each 8.00 2736.89 21895.12 151 186190 erecting detonator rail posts ateach 8.00 375.49 3003.92 required locations as required including cutting the rail to required length varying from 1.00m to 1.50m , leading the rail pieces from nominated station / mid section from nearest depot to site of work, erecting the rail post by making the pit size as required and filling with cc 1:3:6 mix with 40mm aggregates and painting the rail post with two coats of synthetic enamel paint of approved colour and make, marking of detonator symbol as per site requirement, with contractor's materials, labour, paint, all lead and lifts, etc., complete as per specifications and as directed by the engineer-in-charge. note: excavation and concrete work for foundation will be paid under relevant item. page 35 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 152 186200 erecting emergency chain posts foreach 4.00 457.44 1829.76 level crossings , including cutting rail to required length varying from 1.00m to 1.50m , drilling holes, providing hooks & links / rings with necessary locking arrangements to fix emergency chain, leading the rail pieces from nominated station / mid section from nearest depot to site of work, erecting the rail post by making the pit of size as required and filling with cc 1:3:6 mix with 40mm aggregates and painting the rail post with two coats of synthetic enamel paint of approved colour and make, with contractor's materials, labour, paint, all lead and lifts, etc., complete as per specifications and as directed by the engineer-in- charge. note: (1) rails & chain will be supplied by railways. (2) excavation and concrete work for foundation will be paid under relevant item. 153 186210 providing rail barricading with rails mt 350.00 1386.19 485166.50 supplied by railways with verticals provided at every 1.5m interval, height of barricade being up to 1.5m above ground / termination level and one or more row of horizontal rail, duly cutting rails and drilling holes as required, assembling necessary accessories to required length, including earthwork excavation for foundation, fixing posts in cement concrete 1:3:6 base of size 0.45m x 0.45m x 0.60m and one coat of red oxide painting of steel work. note: 1. excavation and concrete work will be paid separately. 2. rail shall be made available within 250 metres 154 194010 manufacture of flared portion of set 10.00 3509.41 35094.10 guard rail by cutting and bending to required shape & rdso's approved drawings. note: (1) rails shall be supplied by railways. (2) one set consists of two rails i.e. both left and right. 155 194020 providing and fixing of flared portion set 10.00 3189.64 31896.40 of guard rails of any rail section over psc sleepers including fixing of with all fittings, including leading of rails and fittings, squaring and adjusting spacing of sleepers as required, providing nose blocks duly cutting wooden blocks supplied by railways and fixing it with bolts of 16mm dia as directed complete and finished as per rdso's approved drawing. note: 1.one set consists of lh & rh side rails of one end. 2.required p.way fittings will be supplied at sse stores depot. page 36 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 156 194040 drilling of 25mm to 40mm dia. holes each 1000.00 227.05 227050.00 in psc sleepers with suitable rotary hammer / drilling machine at indicated location for fixing of guard rails on bridges & its approaches as per approved drawing and fixing of contractor's hdpe dowels and adhesive of approved quality to drawing no. rdso/t-3002, procured from rdso's approved sources with contractor's materials and consumable. 157 195090 bending the inner and outer 52 set 2.00 42629.37 85258.74 kg/60kg/90r rails available at site suitable for v portion along bulb of rerailing ramp as per rdso drg no t-8259 drilling of holes and cutting to the required length and shape all lead, lifts, labour, tools and plants machinery and all other required materials for bending etc, and as directed by engineer in charge at site. 158 195100 supplying providing and fixingcudm 10000.00 47.11 471100.00 country kali wood/hard wood (non teak) sleepers of various thickness and length as per the rdso re railing ramp drg no t-8259 for fixing bent rails and ms plates including cutting the wood in saw mills, transporting to site of work with all leads and lifts, labour, tools and plant etc. as directed by engineer in- charge. 159 195110 fixing of 60kg/52 kg/90r rails for re each 2.00 16292.07 32584.14 railing ramp as per rdso drg no t- 8259 on bridge approaches on wooden/psc sleepers including fixing railways fishplates, bolts, nuts, ms bearing plates, screws, check blocks of re-railing ramp etc, levelling after drilling of holes in rails wherever necessary under block with contractor's labour, tools and plants, machinery all etc, complete and as directed by engineer in charge at site. page 37 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 manufacturing, fabricating and supplying retro-reflective level crossing indicator boards, made of 2mm thick aluminium sheet or 3mm thick aluminium composite sheet, face to be fully covered with high intensity encapsulated type heat activated retro-reflective sheeting conforming to type-iv of astm- d4956-01 in yellow & black or other colour combination including subject matter, message, symbols, borders etc. as approved by engineer in- charge or as per irpwm guidelines, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of astm-d- 4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back-support frame of m.s. angle iron of size 25mm x 25mm x 3mm provided all along the edges of board with theft resistant measures, back side of board shall be with non-peelable weather-proof paint, consisting of one coat of zinc chromate primer and two coats of epoxy paint. vertical post shall have black & white anti-corrosive paint or powder coating complete, as directed. 160 202011 bilingual whistle boards for level set 2.00 7501.49 15002.98 crossing of size 600mm x 600mm of each board with back support frame welded to vertical post of ms t section of size 75mm x 75mm x 6mm x 3950mm 161 202012 speed breaker / rumble strips set 2.00 7163.51 14327.02 board of size 900 mm equilateral triangular shape and 600mmx200mm boards with back support frame welded to vertical post of ms t section of size 80mmx80mmx8mmx3650mm 162 202013 un-manned level crossing danger set 2.00 4423.61 8847.22 stop board of size 675mmx525mm with back support frame welded to vertical post of ms angle of size 50mmx50mmx6mmx3650mm 163 202014 manned level crossing indicatorset 2.00 6648.09 13296.18 board of size 900 mm equilateral triangular shape with back support frame welded to vertical post of ms t section of size 80mmx80mmx8mmx3650mm page 38 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 164 202016 manufacturing and supply of circulareach 2.00 3565.10 7130.20 stop disc of 600mm dia for fixing on emergency chains at level crossings as given in irpwm including providing retro reflective sheet fully covered over board confirming to type-iv of astm- d4956 in red back ground colour and text "stop" of white colour over back ground. the circular board shall consists of 2mm thick aluminium sheet fixed to 1.5mm thick ms sheet of 600mm dia with suitable sized aluminium alloy rivets @ 20 cm c/c to back-support .retro reflective sheet is to be pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of astm-d-4956-01.a vertical holding stand of 1000 mm length x15mm thick to be jointed to back side of board along with a hook for fixing emergency chain as directed by engineer in charge. manufacturing, fabricating and supplying retro-reflective engineering indicator boards, made of 2mm thick aluminium sheet or 3mm thick aluminium composite sheet, face to be fully covered with high intensity encapsulated type heat activated retro-reflective sheeting conforming to type-iv of astm-d4956-01 in yellow & black or other colour combination including subject matter, message, symbols, borders etc. as approved by engineer in-charge or as per irpwm guidelines, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of astm-d-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back- support frame of m.s. angle iron of size 25mm x25mm x 3mmprovided all along the edges of board with theft resistant measures back side of board shall be with non-peelable weatherproof paint, consisting of one coat of zinc chromate primer and two coats of epoxy paint. vertical post shall have black & white anti-corrosive paint or powder coating complete, as directed. 165 202021 caution indicator board of sizeeach 5.00 6231.22 31156.10 1400mmx400mm with back support frame fixed to vertical post of ms angle of size 50mmx50mmx6mm of 3650 mm long 166 202022 speed indicator board of equilateraleach 24.00 5388.98 129335.52 triangular shape having each side of 1000mm with back support frame fixed to vertical post of ms angle of size 50mmx50mmx6mm of 3650 mm long page 39 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 167 202023 stop indicator board of sizeeach 3.00 6231.22 18693.66 1400mmx400mm with back support frame fixed to vertical post of ms angle of size 50mmx50mmx6mm of 3650 mm long 168 202024 termination indicator board of each 12.00 7524.70 90296.40 circular shape having diameter of 1000mm with back support frame welded to vertical post of ms angle of size 50mmx50mmx6mm of 3950 mm long 169 202030 manufacturing, supplying and fixing each 110.00 1056.00 116160.00 curve indicator / point indicator / sej boards to be provided at various locations on formation, made out of ms sheet 2mm thick of size 450mm x 300mm duly fixed with ms frame of 25mm x 25mm x 3mm angle welded to 50mm x 50mm x 3mm ms angle, 1000mm long post split and bent 100mm at bottom end with all lead & lift as per specification and including painting of details with enamel paint, as directed by engineer in-charge (earthwork & concreting will be paid separately) 170 211130 providing and fixing trolley refuge each 100.00 3471.50 347150.00 of size 3.0m x3.0m on cess, placing with released unserviceable psc sleepers and keeping them at all four sides of refuge and also placing as matting inside the refuge by keeping them in upside down position with a minimum of 14 sleepers including levelling with earth, excavation, all lead and lift, crossing of tracks, leading the sleepers with in a free lead and lift, handling etc., with all contractor's men material complete and as directed by the engineer-in-charge. note: earth-work will to be paid separately under relevant item. hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. the contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. payment shall be made for actual working hours at site. 171 211201 jcb backhoe loaders 3dx plus orhour 1000.00 870.14 870140.00 similar with minimum 1.10 cum bucket capacity 172 211210 arranging labour as and whenday 1250.00 606.09 757612.50 required by the engineer in charge, for various works under sse/p.way, with contractor's t&p, equipments, hand signal flags, etc. as per specifications, special conditions and detailed scope of work as furnished in the tender and as directed by the engineer in charge. note: item shall be operated with prior approval of concerned sr. den / den in charge. page 40 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 173 211250 manufacturing and fixing buffer stop each 11.00 14080.46 154885.06 with railway supplied rails, cutting, including bending of rails as per plan ,with all contractor's labour, materials, tools, plants etc. and all lead and lift including crossing of track where necessary and as directed by engineer in charge at site. note: excavation, fixing rails in cement concrete, drilling of holes will be paid separately. 174 211260 manufacture and supply of precast each 18.00 375.65 6761.70 kilometer posts of size 1.15 x 0.50 x 0.075 m in rcc 1:2:4 mix, engraving letters and leading to work spot, fixing in position with cc 1:3:6 concrete duly making pits of size as required, painting the post, writing the letters on both sides of the post with 2 coats of enamel paint of approved quality to the railways drawings/irpwm with contractor's materials, cement, steel, labour, tools, plant, with all lead and lifts etc., complete as per specifications and as directed by the engineer-in- charge. note: excavation, concrete and steel work will be paid under relevant items. total 63163978.55 schedule schedule g-transportation of p.way material item- 7 transportation of p.way material s no. item no description of item unit qty rate amount loading of rails of any section and length up to 13 metres in wagons / truck / trailer including lead up to 50 metres and lift up to 5 metres. 1 171014 i n wagon where mechanical mt 2125.00 105.42 224017.50 handling is possible and traffic block is not required or in truck/trailer. loading of tongue rail, stock rail, switch assembly and crossings of any section and length, sej, glued joint etc. with / without p.way fittings and fastenings, in wagon / truck / trailer including lead up to 250 metre and lift up to 5 metre. 2 171024 i n wagon where mechanical mt 400.00 104.31 41724.00 handling is possible and traffic block is not required or in truck/trailer. unloading of rails of any section and length up to 13 metre, in neat manner for railway usage from departmental material train (dmt) or contractor's / railway's truck/trailer including lead up to 50 metre, lift up to 5 metre and stacking in prescribed manner. 3 171053 from wagon where mechanical mt 2125.00 78.08 165920.00 handling is possible and traffic block is not required or in truck / trailer. page 41 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 unloading of all type of rails of length 130 metre and beyond from end unloading rake and keep the panels in head-up position at specified distance from centre of track clear from any infringement.. note: contractor has to keep oxygen and acetylene gas with cutter as standby during the period of work. 4 171071 during period of traffic block mt 800.00 25.61 20488.00 5 171072 not involving traffic block mt 2080.00 21.46 44636.80 loading of 52kg / 60kg psc normal line and special sleepers up to 2.75 metre length in depot / station / mid-section between stations in a neat manner to departmental material train (dmt) or contractor's / railway's truck/trailer with crane or any other means including crossing of one track with free lead up to 250 metre and lift up to 5 metre, if required with contractor's labour, tools & plants, machinery, consumables etc. note: in case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied. 6 172014 i n wagon where mechanical mt 12300.00 81.45 1001835.00 handling is possible and traffic block is not required or in truck / trailer loading of 52kg / 60kg psc line and special sleepers beyond 2.75 metre length including existing fittings and fastenings in depot / station / mid- section between stations in a neat manner to departmental material train (dmt) or contractor's / railway's truck/trailer with crane or any other means including crossing of one track with free lead up to 250 metre and lift up to 5 metre, if required with contractor's labour, tools & plants, machinery, consumables etc. note: in case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied. 7 172024 i n wagon/truck / trailer where mt 1600.00 103.87 166192.00 mechanical handling is possible and traffic block is not required. loading, leading and unloading of all types of p.way fittings and all other miscellaneous material except rails, sleepers, switches, crossings, sejs and glued joints by road vehicles for different leads. note: lead shall be the shortest motorable road length between the points of loading and unloading. 8 172041 lead up to 5 km mt 450.00 150.99 67945.50 9 172047 lead beyond 100 km and up to 150mt 450.00 991.65 446242.50 km 10 172048 extra for every km per mt beyond mt-km 22500.00 3.42 76950.00 150 km over item no. 172047 page 42 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 transportation of rails, sleepers, switches, crossings, sejs and glued joints by road vehicles for different leads. note: 1 . lead shall be the shortest motorable road length between the points of loading and unloading. 2. loading and unloading shall be paid extra under relevant items. 11 172051 lead up to 5 km mt 16550.00 52.20 863910.00 12 172052 lead beyond 5 km and up to 10 km mt 9500.00 95.53 907535.00 13 172053 lead beyond 10 km and up to 20 km mt 9500.00 155.10 1473450.00 14 172057 lead beyond 100 km and up to 150mt 16550.00 892.86 14776833.00 km 15 172058 extra for every km per mt beyond mt-km 827500.00 3.42 2830050.00 150 km over item no. 172057 unloading of 52kg / 60kg psc line and special sleepers up to 2.75 metre length in depot / station / mid-section between stations in neat manner for railway usage from departmental material train (dmt) or contractor's / railway's truck/trailer with crane or any other means including crossing of one track and lead up to 250 metre & lift up to 5 metre with contractor's labour, tools & plants, machinery, consumables etc. note: in case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied. 16 172063 from truck / trailer mt 12300.00 76.55 941565.00 unloading of 52kg / 60kg psc special sleepers beyond 2.75 metre length in depot / station / mid- section between stations in neat manner for railway usage from departmental material train (dmt) or contractor's / railway's truck/trailer with crane or any other means including crossing of one track and lead up to 50 metre & lift up to 5 metre with contractor's labour, tools & plants, machinery, consumables etc. note: in case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied. 17 172073 from truck / trailer mt 1600.00 79.45 127120.00 spreading of new / sh , normal or wider base psc sleepers from stack along track on either side for different leads with all lifts by any means. 18 172081 for a lead up to 500m each 10925.00 59.83 653642.75 19 172082 extra to item no. 172081 for each 18300.00 40.07 733281.00 additional lead of every 500m or part thereof beyond 500 m page 43 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 unloading of switches / crossings / sej rails / glued joints of any rail section and length with or without p.way fittings & fastenings in neat manner for railway usage from departmental material train (dmt) or contractor's / railway's truck/trailer with lead up to 250 metre & lift up to 5 metres. 20 173013 from truck / trailer mt 400.00 105.78 42312.00 collection, segregation and stacking of various scattered p.way materials at nominated stacking location with serviceable and un-serviceable ones separately within a lead up to 500 metre and lift up to 5 metre including crossing of track(s) wherever necessary as directed by engineer-in-charge. 21 173031 rails, switches, crossings, sej, glued mt 200.00 329.10 65820.00 joints, check rails etc. 22 173032 all type of psc sleepers mt 500.00 359.40 179700.00 23 173033 p.way fittings of all types and other mt 50.00 333.41 16670.50 similar loose items 24 173040 stacking of glued joints in singleeach 100.00 56.11 5611.00 layer for electrical testing, in such a manner that glued joints - (a) shall not touch ground, (b) shall not touch one another, (c) shall not touch any rail or any metallic body, (d) shall not be water-logged from any side and (e) end post shall not rest on supports of glued joint total 25873451.55 schedule schedule h-preparation of drawings and transportation of ballast item- 8 preparation of drawings and transportation of ballast s no. item no description of item unit qty rate amount 1 nscon17002description:- preparation and kilometre 17.50 940.00 16450.00 submission of index plan and section showing new bg line alignment, yards, contours, rivers, roads, lawns etc., from topo sheet and marking bridges, level crossings, curves, notes and other relevant particulars to appropriate scale as per railway engineering code, prepared in auto cad on tracing cloth along with six copies ammonia/ computer prints of approved drawings as per details furnished by railway with indian ink in different colours i.e.existing particulars in black ink and work done particulars in red ink and other particulars in different colours with contractor's computers, stationery, staff, materials, labour, tools, plant etc., including incorporation of corrections a n d modifications as suggested by railway administration as per special conditions and as directed by the engineer-in-charge. rate includes plan and section per km and drawings to be prepared separately for plan and section as directed by the engineer-in- charge. note: cd of the same should also be submitted. page 44 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 2 nscon17003description:- preparation and each 4.00 9140.00 36560.00 submission of completion working plan and section (5 km project sheets) showing longitudinal section for every 5.00 kms length duly marking kilometres, chainages, existing ground levels, completed formation levels, rail levels, completed/ existing bridges, level crossings, gradients, curves, notes and other relevant particulars to appropriate scale a s per railway engineering code, prepared in auto cad on 75 micron thickness film including submission of check print for proof check, to incorporate corrections and modifications, as suggested by the railway administration as per details given by railway with contractor's materials, labour, tools, plant etc., as p e r special conditions a n d as directed by the engineer-in-charge. 3 nscon17004description:- preparation and kilometre 17.50 910.00 15925.00 submission of lwr/cwr plans and track diagrams separately in duplicate in originals for construction of new bg line between ...... and ......... stations from km ...... t o k m .........showing details of weldings, location of sejs, track details, p-way material details, notes and other relevant particulars as per railway engineering c o d e to appropriate scale prepared in auto cad on 75 micron thickness film of appropriate thickness along with six copies o f ammonia prints showing the existing particulars in indian ink and completed in red ink as per the details given b y railway with contractor's materials, labour, tools, plant etc., including incorporation of corrections and modiications as suggested by railway administration, including submission of check prints for proof check and obtaining approval of drawing from competent authority as required sizes by railways and as directed by the engineer-in-charge. 4 nscon19003reclaiming the stone ballast from cum 1025.00 129.00 132225.00 exising alignment 5 nscon19005description:- transportation of cum 40000.00 182.00 7280000.00 railway's stone ballast by means of contractor's own rail lorry that can run on bg track/ road lorry including loading b y mechanical means or manually. leading and unloading the same a t required site including ballast profile with all contractor's m e n a n d materials, lorry, fuel, consumables, tools, all leads and lifts etc., complete as per specifications and as directed by the engineer-in-charge. a) lead upto 5 km. page 45 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 6 nscon19006description:- transportation of cum 25500.00 214.00 5457000.00 railway's stone ballast by means of contractors own rail lorry that can run on bg track/ road lorry including loading b y mechanical means or manually available between specified stations for a lead beyond 5 km. and up to 15 km. with all leads and lifts including crossing of track, if any transporting and unloading the same within railway limits along the side of alignment of track and dumping the unloaded ballast in locations including ballast profile etc., complete with all contractor's l o r r y , fuel, consumables, labour, tools, all leads a n d lifts etc., complete a s per specifications and as directed by the engineer-in-charge. 7 nscon21020flash butt welding of uic 60kg r260 each 225.00 19148.00 4308300.00 /90 uts 20 rail panels 8 nscon22009description:- fabricating assembly ineach 400.00 18443.00 7377200.00 situ g 3 (l) type glued insulated rail joints for broad gauge 60 kg with all contractor's materials to and from transportation of material, octroi etc., complete in all respects rdso/t- 2572 with 6 mm thick end post including rail cutting, cleaning of ends, drilling of rail end holes of chamfering during condition not requiring traffic block period i.e., as per manual glued insulated rail joint rev.1998 with up to date correction slip etc., complete with all materials, labour, machinery, consumables as per the direction of engineer-in- charge 9 nscon22010description:- fabricating assembly ineach 50.00 17660.00 883000.00 situ g 3 (l) type glued insulated rail joints for broad gauge 52 kg with allcontractor's materials to and from transportation of material, octroi etc., complete in all respect rdso/t- 671 with6 mm thick end post including rail cutting, cleaning of ends, drilling of rail end holes of chamfering during blockperiod i.e., as per manual glued insulated rail joint rev.1998 with up to date correction slip etc., complete with allmaterials, labour, machinery, consumables as per the direction of engineer-in-charge page 46 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 10 nscon22012description:- fabricating assembly ineach 400.00 21816.00 8726400.00 situ g 3 (l) type glued insulated rail joints for broad gauge 60 kg with allcontractor's materials to and from transportation of material, octroi etc., complete in all respect rdso/t- 2572 with6 mm thick end post including rail cutting, cleaning of ends, drilling of rail end holes of chamfering during blockperiod i.e., as per manual glued insulated rail joint rev.1998 with up to date correction slip etc., complete with allmaterials, labour, machinery, consumables as per the direction of engineer-in-charge total 34233060.00 4. eligibility conditions importantall documents uploaded and remarks / confirmation entered by the bidders against any : eligibility condition shall be opened as part of technical bid only standard financial criteria s.no. description confirmationremarks documents required allowed uploading the tenderer must have minimum average annual contractual turnover of v/n or 'v' whichever is less; where v= advertised value of the tender in crores of rupees n= number of years prescribed for completion of work for which bids have been invited. the average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited allowed 1 balance sheet. however, in case balance sheet of the previous year is no no (mandatory) yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. the tenderers shall submit requisite information as per annexure-vib, along with copies of audited balance sheets duly certified by the chartered accountant/ certificate from chartered accountant duly supported by audited balance sheet. if jv firms are allowed to participate, financial eligibility of the jv firm 1.1 shall be adjudged based on satisfactory fulfillment of the para no.17.15.2 no no not allowed of part-i of irsgcc-2022 [including upto acs no.11] note: if the tender is not accompanied by the certificate(s) in support of 1.2 financial eligibility as above, the tender shall be rejected. no post-tenderno no not allowed correspondence will be entertained. standard technical criteria s.no. description confirmationremarks documents required allowed uploading (a)the tenderer must have successfully completed or substantially completed any of the following categories of works during last 07 (seven) years, ending last day of month previous to the one in which tender is invited[even though the work might have commenced before allowed 1 the qualifying period]: three similar works each costing not less than theno no (mandatory) amount equal to 30% of advertised value of the tender, or two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or one similar work each costing not less than the amount equal to 60% of advertised value of the tender. page 47 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 the total value of similar nature of work completed during the qualifying period and not the payments received within qualifying period alone, shall be considered. in case, final bill of similar nature of work has not been passed and final measurements have not been recorded, the paid amount including statutory deductions will be considered. if final measurements have been recorded and work has been completed with 1.1 no no not allowed negative variation, then also the paid amount including statutory deductions will be considered. however, if final measurements have been recorded and work has been completed with positive variation but variation has not been sanctioned, original agreement value or last sanctioned agreement value whichever is lower shall be considered for judging eligibility. in case jv firms are allowed to participate, technical eligibility of the jv 1.2 firm shall be adjudged based on satisfactory fulfillment of the para no no not allowed no.17.15.1 of part-i of irsgcc-2022 [including upto acs no.11] the works executed by tenderer for any govt. / govt. bodies / psus and public listed company (as detailed in note for para no.10.1 of part-i of 1.3 no no not allowed irsgcc 2022 including upto acs no.11) shall only be considered for fulfilling of technical eligibility criteria. the work experience certificate shall be in the name and style of the tenderer participating or as per provisions under clause 17.15 of part-i of irsgcc 2022 (including upto acs no.11) for jv firm, if eligible to 1.3.1 participate. however, in case the tenderer is submitting the certificateno no not allowed issued to a jv firm of which the tenderer is a member, the credentials proportionate to his share in the jv will be considered. the tenderer shall submit an attested copy of relevant jv agreement along with the tender. the work experience certificate shall be issued by an officer not below the rank of ja grade or bill passing officer in railways and bill passing 1.3.2 officer/executive in-charge of work in other govt. / govt. bodies / psus. no no not allowed the certificate should bear the signature and seal of the issuing officer, name of the department etc. note for para no.10.1 of part-i of irsgcc (including upto acs no.11); work experience certificate from private individual shall not be considered. however, in addition to work experience certificates issued by any govt. organisation, work experience certificate issued by public listed company having average annual turnover of rs 500 crore and above in last 3 financial years excluding the current financial year, listed on national stock exchange or bombay stock exchange, incorporated / registered atleast 5 years prior to the date of closing of tender, shall also allowed 1.3.3 be considered provided the work experience certificate has been issued no no (mandatory) by a person authorized by the public listed company to issue such certificates. in case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by chartered accountant, tds certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. defination of similar work :- any railway track work including track 1.4 no no not allowed maintenance work bidders shall confirm and certify on the behalf of the tenderer including its constituents as under: s.no. description 1 i/we the tenderer (s) am/are signing this document after carefully reading the contents. i/we the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation 2 thereof. i/we hereby declare that i/we have downloaded the tender documents from indian railway website www.ireps.gov.in . i/we have verified the content of the document from the website and there is no addition, no 3 deletion or no alteration to the content of the tender document. in case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway administration shall be final and binding upon me/us. i/we declare and certify that i/we have not made any misleading or false representation in the forms, 4 statements and attachments in proof of the qualification requirements. i/we also understand that my/our offer will be evaluated based on the documents/credentials submitted along 5 with the offer and same shall be binding upon me/us. i/we declare that the information and documents submitted along with the tender by me/us are correct and i/we 6 are fully responsible for the correctness of the information and documents, submitted by us. page 48 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 i/we certify that i/we the tenderer(s) is/are not blacklisted or debarred by railways or any other ministry / 7 department of govt. of india from participation in tender on the date of submission of bids, either in individual capacity or as a huf/ member of the partnership firm/llp/jv/society/trust. i/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the bid security and may also lead to any 8 other action provided in the contract including banning of business for a period of upto two year. further, i/we and all my/our constituents understand that my/our offer shall be summarily rejected. i/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of bid 9 security/security deposit and performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year. i/we have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with india and certify that i am/we are not from such a country or, if from such a country, have been 10 registered with the competent authority. i/we hereby certify that i/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed) partnership firm/joint venture (jv) / hindu undivided family (huf) / limited liability partnership (llp) etc. s.no. description partnership firm/joint venture (jv) / hindu undivided family (huf) / limited liability partnership (llp) etc. please submit a certificate in the prescribed format (please download the format from the link given 1 below). non submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer. ( click here to download the format of self certification) 5. compliance importantall documents uploaded and remarks / confirmation entered by the bidders against any : compliance condition shall be opened as part of technical bid only. commercial-compliance s.no. description confirmation remarks documents required allowed uploading the bid security shall be deposited either in cash through e- payment gateway or submitted as bank guarantee bond from a scheduled commercial bank of india. the bank guarantee bond shall be as per annexure- via and shall be valid for a period of 90 days beyond the bid validity period. tenderers may refer para 5 of irsgcc -2022 -part-i (including up to acs no.11) for other details in regard to payment of bid security. the original bank guarantee should be delivered in person to allowed 1 yes yes dy.ce/c/plg./sc, room no.206a, 2nd floor, rail nirman nilayam, (mandatory) s.c. railway, secunderabad -500025. note: as per acs no.5 issued by railway board vide letter no.2022/ce-i/ct/gcc- 2022/policy dt.20.10.2023, "the original bank guarantee should be delivered in person to the oficial nominated as indicated in the tender document before closing date for submission of bids (i.e., excluding the last date of submission of bids (authority: pce/sc's lr.no.w.496/policy/vol.ix, dt:31.05.2024). please enter the percentage of local content in the material being offered. please enter 0 for fully imported items, and 100 allowed 2 for fully indigenous items. the definition and calculation of localno yes (optional) content shall be in accordance with the make in india policy as incorporated in the tender conditions. 3 following documents shall be enclosed no no not allowed in case of sole proprietorship firm, the documents to be attached with the tender are: (i)an undertaking that he is not blacklisted or debarred by railways or any other ministry / department of govt. of india from participation in tender on the date of opening of bids, either in individual capacity or as a allowed 3.1 member of the partnership firm or jv in which he was / is a yes yes (mandatory) partner/member. concealment / wrong information in regard to above shall make the contract liable for determination under clause 62 of the general conditions of contract.(ii) all documents in terms of para 10 of the tender form (second sheet) of irsgcc 2022(including upto acs no.11) page 49 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 in case, the tenderer is bidding on behalf of huf the documents to be attached with the tender are : (i) a copy of notarized affidavit on stamp paper declaring that he who is submitting the tender on behalf of huf is in the position of 'karta' of hindu undivided family (huf) and he has the authority, power and consent given by other members to act on behalf of huf. (ii)an undertaking that the huf is not blacklisted or debarred by allowed 3.2 railways or any other ministry/department of govt. of india fromyes yes (mandatory) participation in tender on the date of opening of bids, either in individual capacity or as member of jv in which the huf was / is a member. concealment/wrong information in regard to above shall make the contract liable for determination under clause 62 of the general conditions of contract.(iii) all other documents in terms of para 10 of the tender form (second sheet) of irsgcc 2022 (including upto acs no.11) in case, the tenderer is a partnership firm, the following documents shall be submitted: (i)a notarized copy of the partnership deed or a copy of the partnership deed registered with the registrar. (ii)a notarized or registered copy of power of attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm.(iii)an undertaking by all partners of the partnership firm that they are not blacklisted or debarred by railways or any other ministry / allowed 3.3 department of the govt. of india from participation in yes yes (mandatory) tenders/contracts as on the date of submission of bids, either in their individual capacity or in any firm/llp in which they were/are partners/members. any concealment/wrong information in regard to above shall make the bid ineligible or the contract shall be determined under clause 62 of the general conditions of contract.(iv)all other documents as mentioned in para 18 of the tender form (second sheet) of irsgcc- 2022(including upto acs no.11) in case tenderer is a llp firm registered under llp act-2008, the following documents shall be submitted: (i)a copy of llp agreement (ii)a copy of certificate of incorporation (iii)a copy of power of attorney/authorization issued by the llp in favour of the individual to sign the tender on behalf of the llp and create liability against the llp. (iv)an undertaking by all partners of the llp that they are not blacklisted or debarred by railways or any other ministry / department of the govt. of india from participation in tenders / contracts as on the date of submission allowed 3.4 yes yes of bids, either in their individual capacity or in any firm/llp or jv (mandatory) in which they were / are partners/members. concealment / wrong information in regard to above shall make the contract liable for determination under clause 62 of the standard general conditions of contract (v)all other documents in terms of para 10 of tender form(2nd sheet) of irsgcc- april-2022 part- i(including upto acs no.11). (vi) all other documents as per clause 14 of irsgcc -april -2022- part i (including upto acs no.11) in case the tenderer is a company registered under companies act-2013:-the tenderer(s) shall submit the following documents: (i)the copies of moa (memorandum of association) / aoa (articles of association) of the company (ii)a copy of certificate of incorporation (iii)a copy of authorization/power of attorney issued by the company (backed by the resolution of board of directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)an undertaking that the company is not blacklisted or debarred by allowed 3.5 railways or any other ministry / department of govt. of india yes yes (mandatory) from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or jv in which the company was / is a partner/member. concealment / wrong information in regard to above shall make the contract liable for determination under clause 62 of the general conditions of contract. (v)all other documents in terms of para 10 of tender form (2nd sheet) of irsgcc-2022(including acs no.11) (vi) all other documents as per clause 14 of irsgcc -april -2022- part i(including upto acs no.11) page 50 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 in case the tenderer is a registered society & registered trust, the following documents shall be submitted: (i)a copy of certificate of registration (ii)a copy of memorandum of association of society / trust deed (iii)a copy of power of attorney in favour of the individual to sign the tender documents allowed 3.6 and create liability against the society/trust.(iv) a copy of rules yes yes (mandatory) and regulations of the society (v)all other documents in terms of para 10 of tender form(2nd sheet) of irsgcc- april-2022 part- i(including upto acs no.11). (v) all other documents as per clause 14 of irsgcc -april -2022- part-i(including upto acs no.11). in case jv firms are allowed to participate: jv firm should upload memorandum of understanding [mou] as per the format attached as annexure to the tender in documents. submission allowed 3.7 yes yes of all other documents by jv firm / members of jv should also be (mandatory) as per cl.no.17.14 of part-i of irsgcc-2022(including upto acs no.11) uploading of other relevant documents connected to the tender; such as declaration regarding employment of retired engineer/ retired railway officer, neft form, list of allowed 4 no no personnel/organization, list of plant/ machinery, (as per the (mandatory) formats attached in the list of documents whatever attached and remaining in their own format to be submitted)etc general instructions s.no. description confirmation remarks documents required allowed uploading the successful bidder shall submit "performance guarantee" amounting to five percent (5%) of contract value after award of the work. note: if bid quoted 5% below the advertised tender 1 no no not allowed value, "additional performance guarantee" amounting to five percent (5%) of contract value shall be submitted after award of the work as per acs no.11 of irs gcc-2022. the general conditions of contract governing the performance of the works covered by this tender are the irs gcc-2022 [including upto acs no.11]. a soft copy of the indian railway standard general conditions of contract is uploaded in the attached documents to the tender for reference. hard copy of irsgcc (with up-to-date correction slip) may be perused in the office of the chief administrative officer/ construction/ south 2 central railway / secunderabad - 500071. the tenderer/s is/are no no not allowed deemed to have kept himself/themselves fully informed of the provisions of the irs general conditions of contract including all corrections and amendments issued up to date (as on date, irs gcc-2022 upto acs no.11 shall be considered) while submission of offer and any claim that he/they is/are not aware of any amendment or correction slip to the irsgcc shall not be entertained. page 51 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 study of drawings and local conditions: the drawings for the works can be seen in the office of the chief administrative officer, construction, s.c.railway, secunderabad - 500071 or in the office of the concerned field deputy chief engineer / construction / s.c.railway . it should be noted that these drawings are meant for general guidance only and railway may suitably modify them during the execution of work according to the circumstances without making the railways liable for any claims on account of such changes. if there is any variation between the description in the tender and the detailed plans, the engineer-in-charge will operate the correct 3 no no not allowed description and his decision is final and binding on the tenderer/ contractor. the tenderer/contractor is required to inspect the sites of works and acquaint himself with the site conditions, availability of approaches for transporting of men and materials, space and other factors relating to the works, availability of labour, electricity and water, etc., before quoting his rates. the extent of lead and lift involved in the execution of works and any difficulties involved in the execution of work should also be examined before formulating the rates for complete items of works described in the schedule. the tender submitted will be deemed to have been made after such inspection. drawings for works: the percentage rates for the schedule items and itemized rates for the non-scheduled items quoted by the tenderer as may be accepted by the railways will, hold good irrespective of any changes, modifications, alterations, additions, omissions in the locations of structures and detailed drawings, specifications and/or the manner of executing the work. it should be specifically noted that some of the detailed drawings may not have been finalised by the railway and will, therefore, be supplied to the contractor as and when they are 4 no no not allowed finalised on demand. no compensation whatsoever on this account shall be payable by the railway administration. no claim whatsoever will be entertained by the railway on account of any delay or hold up of the works arising out of delay in approval of drawings, changes, modifications, alterations, additions, omission and the site layout plans or detailed drawings and design and/or late supply of such material as are required to be arranged by the railway or due to any other factor on railway accounts. manual tenders, supporting documents etc., sent by 5 no no not allowed post/fax/courier or in person shall not be accepted. all requisite documents are to be properly submitted online only 5.1 and the bidders should ensure that the content of theno no not allowed documents uploaded is distinctly legible/readable. corrigendum notice on ireps: [i]railway may modify the tender document by issuing online corrigendum through "www.ireps.gov.in" 15 days prior to the tender closing date. for the purpose of corrigendum in the tender, nit period is 6 splitted as under: (a) advertisement period: the time during no no not allowed which all information pertaining to tender shall be available but offers cannot be submitted (b) offer submission period: 15 days prior to closing of tender, during which tenderers can submit their offer. if the bid of a tenderer is seriously unbalanced in relation to the engineer's estimate of the cost of work to be performed under the contract, the railways may require the tenderer to produce 7 no no not allowed detailed price analysis for any or all items of the tender schedule, to demonstrate the internal consistency of those prices with the construction methods and schedule proposed. applicable for the tenders with eligibility criteria: the offer of tenderer(s) who do not enclose work experience certificate & financial eligibility certificate with requisite details, and 8 no no not allowed supporting documents along with their tender to establish their credentials shall be summarily rejected, even though they are working contractors or contractors on approved list. the offer shall be evaluated only from the 8.1 no no not allowed certificates/documents submitted along with the tender offer. page 52 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 any certificate /documents offered / submitted / received after 8.2 the tender opening shall not be given any credit and shall not beno no not allowed considered. attestation of documents may be self attested or attested by a 8.3 no no not allowed gazetted officer. railway reserves the right to verify the authenticity of the 8.4 no no not allowed documents/information furnished. taxes: if rates of existing gst or cess on gst for works contract is increased or any new tax /cess on works contract is imposed by statute after the date of opening of tender but within the original date of completion/date of completion extended under clause 17 & 17a of part-ii of irsgcc-2022 (including upto acs no.11) and the contractor thereupon 9 properly pays such taxes/cess, the contractor shall be no no not allowed reimbursed the amount so paid. further, if rates of existing gst or cess on gst for works contract is decreased or any tax/cess on works contract is decreased / removed by statute after the date of opening of tender, the reduction in tax amount shall be recovered from contractor's bills/security deposit or any other dues of contractor with the government of india. this tender complies with public procurement policy order-2017 dated 19.07.2024. please enter the percentage of local content in the material being offered. please enter 0 for 10 fully imported items, and 100 for fully indigenous items. the no no not allowed definition and calculation of local content shall be in accordance with the make in india policy as incorporated in the tender conditions. tenderer(s) shall note that conditional/alternate offer will not be 11 considered and will summarily be rejected, even though such no no not allowed condition makes them as the lowest tenderer. after opening of the tender, any document pertaining to the constitution of sole proprietorship firm/partnership firm/ registered company/ registered trust/ registered society/ huf/llp etc. shall be neither asked nor considered, if submitted. 12 further, no suo moto cognizance of any document available in no no not allowed public domain (i.e, on internet etc) or in railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in the tender offer submitted{asper clause no. 14(iv) part i of irsgcc 2022 including upto acs no.11} as per clause no.5 part i of irsgcc 2022 (including upto acs 13 no.11) the details of exemptions/discount of bid security no no not allowed payment is as follows: i) any firm recognized by department of industrial policy and 13.1 promotion (dipp) as 'startups' shall be exempted from payment no no not allowed of bid security. iii) labour cooperative societies shall deposit only 50% of bid 13.2 no no not allowed security as mentioned in the tender special conditions s.no. description confirmation remarks documents required allowed uploading bidders should carefully read all the conditions and the special conditions alongwith special conditions - general & technical, which are annexed to the tender document in the documents attached to the tender. these special conditions form part of the 1 tender document and will supplement to the conditions of no no not allowed irsgcc-2022 [including upto acs no.11]. where the provisions of these special conditions are at variance with irsgcc and other documents mentioned above, these special conditions shall prevail. in case of advertised tender value is more than rs. 10 2 crores, joint venture (jv) firms are also considered forno no not allowed eligibility. page 53 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 in case of advertised tender value is more than rs.10 crores, the tender/technical bid will be evaluated based on bid capacity formula detailed as annexure-vi of irsgcc 2022 (including upto acs no.11). note: i)the tenderer(s) shall furnish the details of existing commitments and balance amount of ongoing works with tenderer as per the prescribed proforma of railway for statement of all works in progress and also the works which are awarded to tenderer but yet not started upto the date of opening of tender. in case of no works in hand, a 3 'nil' statement should be furnished. this statement should beno no not allowed submitted duly verified by chartered accountant.(ii) the available bid capacity of tenderer shall be assessed based on the details submitted by the tenderer. in case, the available bid capacity is lesser than estimated cost of work put to tender, his offer shall not be considered even if he has been found eligible in other eligibility criteria/tender requirement. (iii) in case, the tenderer/s failed to submit the above statement along with offer, their/his offer shall be considered as incomplete and will be rejected summarily. 4 issue/consideration of experience certificate of sub-contract no no not allowed consideration of the sub contract work experience certificate :the work experience certificate issued to the sub-contractor by competent authority and submitted in response to tender 4.1 invitation can be considered towards evaluation of eligibility no no not allowed criteria if the entire work awarded to the main contractor is completed in the qualifying period as mentioned in technical eligibility criteria. this work involves measurement of works by contractor (cost of tender is more than rs. 5 crs). contractor has to make his own 5 no no not allowed arrangements for recording measurements from time to time. no additional payments will be in this regard. the tenderer on successful award, while submitting its on- account/final bills, shall certify that the personnel who have been deployed under this contract are not in engagement with 6 no no not allowed any other contract on full time basis. in correct/false declarations will be dealt as per agreement conditions (authority : railway board letter no.2022/sd-ii/22/01/4 pt.1 dt.07-11-2022) undertakings s.no. description confirmation remarks documents required allowed uploading i/ we have visited the works site and i / we am / are aware of 1 no no not allowed the site conditions. page 54 of 57 run date/time: 25/06/2026 13:25:03 scr-const-hq-engg/south central rly tender document tender no: 34-cao-c-sc-2026 closing date/time: 17/07/2026 15:00 [1]i/we have read the various conditions of the tender attached hereto and hereby agree to abide by the said conditions. i/we also agree to keep this tender open for acceptance for the period mentioned in the tender document [nit header] from the date fixed for opening the same and in default thereof, i/we will be liable for forfeiture of my/our bid security submitted. [2] i/we offer to do the work at the percentage rates quoted by me/us in the attached schedule and bind myself/ourselves to complete the work within the period of completion given in this tender document[nit header] from the date of issue of letter of acceptance of this tender. i/we also hereby agree to abide by the irs gcc (including upto acs no.11) and special conditions of contract and to carry out the works according to the iru standard specifications for formation works, bridge works and p.way works 2021 laid down by indian railway, cpwd 2 specifications 2020 for horticulture, land scaping and cpwd no no not allowed specifications 2019 volume 1 and volume 2 laid down by central public works department, new
No More Record.
LOADING...
LOADING...