Latest Shim Tenders 2026

1 |Bid Value:₹ 1.24 Cr. |EMD:₹ 2.48 Lakh |06-10-2026 17 Days Left|T247 ID-104366369

restoration of unit-ist including procurement of material/consumables required - "installation of bulk head on penstock line opening or miv locking for complete arresting water leakages. bulk head to be provided by j&k, pdcl.", "opening of all oil, water and air and grease, pipe lines of turbine and generator.", "installation of erection devices for dismantling / removing of draft tube cone (upper and lower), & runner assembly.", "dismantling of adjusting rings of draft tube, cone.", "dismantling of draft tube upper and the lower, cone.", "installation of bulk head on draft tube opening., bulk head, to be provided by j&k pdcl.", "opening of the supporting plates of regulating rings after disengaging from the connecting rods, of guide vane servomotors.", "dismantling of the existing shaft sleeve, assembly.", "dismantling of guide vane levers, guide vane, links etc.", "dismantling of all the turbine guide bearing, pads and storing them safely.", "decoupling of turbine shaft and the generator, shaft assembly.", "dismantling of all the guide vanes and guide, vane servomotors, etc.", dismantling of all the guide vane bushes from the top cover bush housings. however before their dismantling, diameters of all the pivot bushes shall be measured and recorded., dismantling of the turbine top cover assembly including the lower fixed labyrinth ring., dismantling of the turbine shaft assembly., "dismantling of the existing damaged shaft sleeve, assembly.", dismantling of all the guide vane bushes from the pivot ring assembly. however before their dismantling, diameters of all the pivot bushes shall be measured and recorded., "inspection of all the dismantled studs, dowels, bolts/ nuts, pins to identify their replacement by, new ones.", dismantling of pivot ring assembly., post dismantling activities, "balancing of rotor assembly conducting the impedance measurement of all the rotor pole coils followed by their polarity testing., completing the jointing of all the assembled/ tested rotor poles involving soldering, breezing and proper insulation. measurement of the insulation resistance of the rotor pole winding to check its final healthiness. balancing of rotor assembly including providing of weight", "balancing of rotor assembly including providing, of weight", "thorough cleaning of the complete generator stator core all along its periphery both inside as well as from its outside surface using a suitable, cleaning agent viz mto.", "thorough cleaning of all oil coolers along with, water tubes and pressure testing of the same with assembly.", "thorough cleaning of all turbine guide bearing, oil coolers and pressure testing of the same and assembly.", "thorough cleaning of the complete generator stator winding overhang portions all along its periphery on both its connection-end side as well as from its non-connection end side using a, suitable cleaning agent viz mto.", "blue-matching of rebabitated pads for checking quality of, rebabitating with a surface plate.", "blue-matching of thrust collat bottom surface with the top insulation surface for thrust runner, disc at service bay.", "blue-matching of rebabitated pads with the, coresponding journal surface on the thrust collar assembly.", blue-matching of rebabitated pads with the coresponding journal surface on the lower bearing journal on the generator shaft assembly., polishing of all the turbine guide bearing pads and blue-matching them with the coresponding journal surface on the turbine bearing journal on the turbine shaft assembly., "conducting the dry-out of the generator stator, winding assembly.", measurement of the insulation resistance of the rotor pole winding to check its final healthiness, "conducting the dry-out of the generator rotor, assembly.", boxup activities, assemblies of the top cover assembly in position with replacement of all its old fasteners by new ones which are to be procured., "replacement of 8mm rubber cord by a new, one.", "trial assembly of runner with pivot ring and, measurement of bottom labyrinths clearances.", trial assembly of runner with turbine top cover and measurement of top labyrinth clearances., re-assembly of pivot ring assembly in position., "re-assembly of all guide vanes in the pivot ring, assembly.", "lowering of turbine shaft assembly in the turbine, pit using the erection device.", "re-assembly of all the guide vane bush housings in the top cover and replacement of its damaged fasteners by new ones which are to be, procured", "assembly of regulating ring along with, connecting rods of the guide vane servomotors in the unit.", "lowering of lower bracket assembly along with brake jack assembly in position with all its, fasteners duly tightened.", "lowering of generator rotor assembly in the generator pit, supporting on the jacking pads.", "lowering of upper bracket assembly in position with all its, fasteners duly tightened.", "re-assembly of thrust collar assembly on the generator shaft by shrunk fitting method., checking the vertical movement of thrust collar, assembly.", "reassembly of thrust runner disc assembly, thrust pads, h.s., lubrication system, etc.", "checking of rotational level of generator shaft and correcting, the same", coupling of generator and turbine shaft flanges., "re-assembly of the francis runner assembly and its coupling with turbine shaft using new, coupling bolts & nuts.", "assembly of all associated turbine components viz guide vane servomotors, guide vane lever, & link mechanism.", "carrying out the combined rotational checks of the turbine & generator shafts and correcting the alignment, leveling & equal ioad sharing of, the thrust pads.", "centering of the shaft and setting of bearing clearances in, ugb, lgb & tgb in a concentric manner.", "checking and connecting of all oil pipe lines &, charging of governor.", "bedding & setting of all guide vanes with respect to steel liner, of top cover and lower ring to achieve proper, clearances.", "boxing up all bearings including their oil & water, pipe lines.", "complete assembly of draft tube upper cone, including full tightening of all bolts.", "complete assembly of lower cone with full, tightening of bolts.", "complete assembly of adjusting ring with full, tightening of all the bolts.", "complete assembly of shaft sealing system, including assembly of water pipelines", "complete assembly of oil bath of thrust bearing, with full tightening of bolts.", "assembly of grease pipeline of upper bushes and lower bushes and assembly of water pipe, line of lower bush", "measurement of insulation resistance value of, stator and rotor winding.", "spinning of the machine, dry out and then, synchronizing/ loading of the unit.", "carrying out the dry-out of the generator with windage loss method till the satisfactory levels of ir & the pi values is, achieved.", voltage build-up and subsequent synchronization of the unit followed by loading in steps and checking the unit vibrations at every step till the unit reached the rated load., carrying out the measurement of unit vibrations & dynamic balancing of the unit as required., labyrinth (stationary upper lower), shaft seal (flapper set), "all general purpose consumables, d&h make mo-309 5s welding electrodes, 0-rings, general purpose fasteners, stainless steel shims, insulation paints, etc. required during the, restoration work." for its restoration at ushp-ii, kangan.

Srinagar, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

2 |Bid Value:₹ 7.65 Lakh |EMD:₹ 15.30 K |21-09-2026 2 Days Left|T247 ID-103785639

procurement of air spring liners (shim) for secondary suspension height adjustment.

Mumbai, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

3 |Bid Value:₹ 7.65 Lakh |EMD:₹ 15.30 K |21-09-2026 2 Days Left|T247 ID-103879472

procurement of air spring liners (shim) for secondary suspension height adjustment.

Mumbai, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

4 |Bid Value:₹ 6.29 Lakh |EMD:₹ 12.58 K |12-10-2026 23 Days Left|T247 ID-104290102

supply of consumable spares for old palnt - spare seal kit for po 16 r 150 , ms pipe size 25mm 1 , ms pipe size 15mm nb , ms socket size 1 by2 15mm , ms elbow size 15mm 1by2 , ms bend size 1 by2 nb , ms bend size 25mm 1 , gi hexagonal nipple size 25mm 1 , gi hexagonal nipple size 15mm 1 by2 , gi hexagonal nipple size 1.5 40mm , gi hexagonal nipple size 2 , gi union size 15mm 1 by2 , hdy hose sae 100r1 at l 1000 p 225bar , hdy hose 2sn 0n08 03mby12 l 1000 p 350bar , friction disc steel sk1018bya , tabe type shim 5by8 bym16 x 0.50 mm thick , tabe type shim 5by8 bym16 x 1.00 mm thick , tabe type shim 1 bym24 x 0.50 mm thick , tabe type shim 1 bym24 x 1.00 mm thick , ptfe square gland packing size 16mm , ptfe square gland 14 mm , ptfe armid square gland packing 22mm , ptfe square gland packing size 20mm

Hoshangabad, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

5 |Bid Value:₹ 2.43 Lakh |EMD:₹ Refer Docs |19-09-2026 Ending Today|T247 ID-104121659

supply of - s. s. shim 0.02 mm x 600 mm , s. s. shim 0.03 mm x 600 mm , s. s. shim 0.05 mm x 600 mm , s. s. shim 0.06 mm x 600 mm , s. s. shim 0.08 mm x 600 mm , s. s. shim 0.09 mm x 600 mm , s. s. shim 0.10 mm x 600 mm , s. s. shim 0.15 mm x 600 mm , s. s. shim 0.20 mm x 600 mm , s. s. shim 0.35 mm x 600 mm , s. s. shim 0.50 mm x 600 mm - purchase of stainless steel shims for isps | quantity - 180

Khandwa, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

6 |Bid Value:₹ 71.40 K |EMD:₹ Refer Docs |28-09-2026 9 Days Left|T247 ID-104410384

supply of - assy fuel filter delphi , assy fuel pre filter , primary element air filter bs3 oblique 4 , assy rubber bushing , assy pivot bush , assy ball joint upper , pivot bush new bs2 oblique 3 oblique 4 , bush antiroll bar mtg , assy oil filter , assy lower oblique upper ball joint , assy parking brake cable rear rh , assy parking brake cable rear lh , assy parking brake cable front , wiper blade with rubber element , kit pad assembly with shim , front fog lamp cover lh , front fog lamp cover rh , release cable rhd asey engg , assy front shock absorber , assy rear shock absorber , assy link front antiroll bar , tata genuine coolant 1 litre , tmgo go 80w 90 gear oil , tmgo gr 80w 90 gear oil , engine oil 15w40 , brake fluid dot 4 , power steering oil , distilled water , front shock absorber replacement , link rod replacement , rear shocker replacement , spring bush replacement , brake pad replacement , paid service , electrical line checking labour , leather work , radiator remove oblique fitting , bonnet and door lock replacement , door glass setting , wiper remove oblique refitting , wheel alignment labour , upper arm bush replacement , hand brake cable replacement , lower arm bush replacement , radiator servicing , ball joint replacement - veh repair | quantity - 77

Not Classified, Andaman And Nicobar Islands, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

7 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |21-09-2026 2 Days Left|T247 ID-102292682

corrigendum : supply of inlet valve, o ring an21 nse 6 5 60c7, rubber compensator, sleeve dn 65 pn 16, gasket, o ring, injector assembly, speed sensor 19050, back geared motor 415v 50hz, starting air inlet connection, expansion bellow, cyclam seal assy, injection pump assly dia23 grad, gasket, temperature sensor brg temp sensor, sleeve dn 100 pn 16, glanding, joint for balmo fuel feed pump, rubber compensative sleeve dn150 pn16, spacer, exp bellow, shim injection, hydraulic motor for fuel filter, guide bush, set of gaskets for lub oil filter, element for lo thermostat 63 71 deg c, sealing cord, addesive super cyano 495, quantity - 236

Ernakulam, Kerala, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

8 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |30-09-2026 11 Days Left|T247 ID-103193228

corrigendum : supply of - shim,araldite aw 106,bolt,bush,bush,cap,locating pin,countersunk head screw(f/90),lgc pin (bar)lgc g5 8x30,plug m18x1 5 g5 6,studm12 100nj 15 nse1 181,locking wire dia 3,78l,normal bearing,bolt,piston pin assy,o ring d 41d225 0c7 nse 6 531,piston + pin,compression ring,cyl.liner (light fuel) assy,guide piece f (valve gear),tappet for valve gear,pin roller,bush (bar),roller,rocking arm assembly,copper washer,stud,stud,cylinder head gasket,spherical washer,inj support flange,sealing ring an 13 60c7,slotted head grub screw m12x1.5,12lg 5.6,washer,plug,stud,outside spring,ring d164 3.5d nse 6.531 60c7,bs ring,connection,roller,o ring,rocker cover with o ring(w/o inj.cooler),flange for st air valve,safety valve body,push piece, roller pin(bar),distributor disc,spring collar (tufftriding comp),pressure screw(bar),guide rocker,spcial nut,valve rocker,valve rocker support,tappet,special nut,tappet,valve rockers assly,cover,washer,piston,o ring,ms 29-513/226,21a7,nse 6.531,capnut,injector tappet,lock nut (bar),blind nut,nut,needle,barrel-plunger assembly,thrust -stopper,coupling-holder,top spring collar (bar),plunger spring,bottom spring collar,stop ring,coupling ring,dunb bushes 25-25 du,ball joint sfg 12 uniball,washer z12u,g5.6, | quantity - 7990

Visakhapatnam, Andhra Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

9 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |22-09-2026 3 Days Left|T247 ID-103658418

corrigendum : supply of - shim to sandvik cat. no. 73085616 or similar to suit for tool holder psbnl - 40 40 s-25 - | quantity - 90

Nagpur, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

10 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |22-09-2026 3 Days Left|T247 ID-103739806

corrigendum : supply of - weld stud m10 x 33mm cfl,h/a 16 16fjic str 2500p 16fjic str,h/a 16 16fjic str 2500p 16fjic str,h/a 16 16fjic str 2500p 16fjic str,sleeve 25.13 inches id,nipple 1/2 inches x 1.5inches sch80,nipple 1inches x 9.00 inches sch80,nipple 0.25 inches x2.50 inches sch80,clamp-easy duct 12.00inches dia,clamp t-bolt 25.50 inches -26.00 inches dia,pipe bush hex 16fnpt/ 24mnpt/ 3000fs,plenum lower,leg,plenum upper,dust extension weld,inlet flange,elbow,duct,duct,gasket neoprene,brace,shim 6x4,valve ball 0.25 nftbronze 600 psi w/b,adpt str 16mj1c 16mnpt,adpt el90 8fnpt 08mnpt,adpt el90 16fp / 16mjc,adpt str 04fnpt 02mnpt,adpt tee 16fjs / 16mj /16mj,adpt str 16mp / 8fp,adpt tee16fnpt 16mnpt 16fnpt,body quick coupler 8 fnpt air 3/8 size,adpt tee 02fnpt 02mnpt 02fnpt,- dust collector group bo items | quantity - 910

Bangalore, Karnataka, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

11 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |22-09-2026 3 Days Left|T247 ID-103824217

supply of shim rubber width 1.1/2" x 1" thick to emd pt. no. 8304908. as per drg.no. 8304908 as pe r specn. shim rubber width 1.1/2" x 1" thick to emd pt. no. 8304908. [ warranty period: 30 months aft er the date of delivery ] ] ngc depot, nfr

Guwahati, Assam, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

12 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |25-09-2026 6 Days Left|T247 ID-103834482

supply of - ma31pp00p380110100 coupling , ma31pp00p380110300 coupling , ma31pp00p380110200 disk shim - | quantity - 4

Guna, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

13 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |21-09-2026 2 Days Left|T247 ID-103838294

supply of set of m.s. shim for bogie nose liner, it consists of 02 items of wag7 loco as per drg. no. srdee/rs/els/ed/mech.6 4 (1) m.s. shim for nose liner size 93mmx87mmx1mm (thickness) - 01 no./set (2) m.s. shim for nose linear size 93mmx87mmx0.5 mm (thickness) - 01 no./set. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Erode, Tamil Nadu, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

14 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |19-09-2026 Ending Today|T247 ID-103841895

supply of - tm control valve kit 125sk01035 , 125 sk01002 service kit , hose 97138317 , hose 94080512 , shaft seal kit 2658212705 , shaft seal 2657831802 , hose 97135479 , shim assembly 125td00143 , shim assy 125td00151 - hemm spares | quantity - 23

Bardhaman, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

15 |Bid Value:₹ Refer Docs |EMD:₹ 17.74 K |19-09-2026 Ending Today|T247 ID-103842433

Singhbhum, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

16 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |22-09-2026 3 Days Left|T247 ID-103912865

supply of dia 128 piston ring compression, pkg 1st 2st ic cover flange, gasket m24 ermeto, diaphragm safety, valve needle 14 bsp, filter oil collar, oil level indicator, a 75 v belt, nring, sring, rring, air filtercomplete, piston pin, safety valve, hose, piston pin bearing, solenoid valve complete, auto drain solenoid, safety valve, connecting rod, main bearing bushing, crankshaft, piston stage 4, power contactor, indicating lamps, pump mechanical seal, push buttons, valve safety assembly 2nd stage, valve assy. blowdown 1 piece, ring soc dia110, connecting rod bearing top & bottom, solv assy 3way, seal oil 52x35x7, bush dist oil seal, packing crankcase to cyl, shim ball pivot 0 05, shim connecting rod 0.05, shim 0.05 water jkt, shim water jacket iii stage cylinder 0 50, shim 3rd stage cylinder head 0 30, lock washer crank shaft, connection hose brass ek2, washer cpg 14 5x24x2, hexagonal nut m10, nring, rring 3rd stage, rring, oring, push button green 1no, oring, oring, pressure gauge, backup ring, oring, oring, air filter insert for air filter, solenoid valve, resilient mounts, piston pin for 2nd stage, gasket, gasket, gasket, washer, bursting plate, temparature transmitter, valve assy nrv, akcc6060 rfpl avm, 9bd 14bsp 10 pg, molecular sieve kg quantity - 1045

Mumbai, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

17 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |30-09-2026 11 Days Left|T247 ID-103924424

supply of shim for cbc coaches, size: 2 mm plate thickness. drawing no: s.e.railway's drg.: cwm sk. no. 4519, alt.-nil, (j & t drg. office / kgpw.) matl.& specn : is: 2062 (part 1) : 2025, gr. e 250 a. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] coaching depot stores/src, ser

Kharagpur, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

18 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |21-09-2026 2 Days Left|T247 ID-103972216

supply of set of shim for gear case used for hitachi tm hs15250a as per sr. dee/trs/ldh dr g. no. a-4/09 /ldh/ m- 6/m-17. one set of shim consists of 2 types of shim having all dimensions & material same except thickness as ref 1 & 2. [ warranty period: 30 months after the date of deliv ery ] ] sr.section engineer(heavy

Bhusawal, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

19 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |17-11-2026 59 Days Left|T247 ID-104015149

supply of shim for inner spring tpl-9320 spec: dlw part no.11275820 [ warranty period: 30 mo nths after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Itarsi, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

20 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |21-09-2026 2 Days Left|T247 ID-104043004

supply of shim copper for kta -50 l 1400 hp demu dpc. each set consisting of 03 item as per annexu re-a. [ warranty period: 30 months after the date of delivery ] ]

Hajipur, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

93 Latest Shim Tenders

Live Shim Tenders 2026

Srinagar, Jammu And Kashmir, India

Mumbai, Maharashtra, India

Mumbai, Maharashtra, India

Hoshangabad, Madhya Pradesh, India

Khandwa, Madhya Pradesh, India

Not Classified, Andaman And Nicobar Islands, India

Ernakulam, Kerala, India

Visakhapatnam, Andhra Pradesh, India

Nagpur, Maharashtra, India

Bangalore, Karnataka, India

Guwahati, Assam, India

Guna, Madhya Pradesh, India

Erode, Tamil Nadu, India

Bardhaman, West Bengal, India

Singhbhum, Jharkhand, India

Mumbai, Maharashtra, India

Kharagpur, West Bengal, India

Bhusawal, Maharashtra, India

Itarsi, Madhya Pradesh, India

Hajipur, Bihar, India