FILTERS
supply of ovcrf (pt no-40113557) [ warranty period: 30 months after the date of delivery ] ]
View Insights
supply of 16.25 t bogie frame to drg no. icf/sk 3-0-3-047, rdso spec. c-9202, rev-02 or latest. the firm shall fulfill the requirement as per lcf/md/specn 147, issue status 01, rev-02 or latest (1 set consists of 4 nos) [ warranty period: 60 months after the date of delivery ] ]
supply of battery operated angle grinder cutting machine, spindle thread m14 with 2 bat teries and one charger, no load speed-8500-11000 rpm, battery capacity- minimum 4ah, make-b osch, makita or similar [ warranty period: 30 months after the date of delivery ] ]
corrigendum : supply of round plate with stopper spring for nlb bogies for constant contact pu side bearer pads c onfirming to rdso spec. no. wd-38-misc-2004 (rev.-3 of april, 2025), design b and compliant with spac e envelop drg. no. wx-04057. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted : max 8 lacs ] ] smm-d kurdwadi, cr
supply of set of end covers required for auxiliary compressor motor, model crc 150 of m/s. rotomag make consisti ng of 02 items as follows. 1) front cover as per m/s. rotomag part no. 4-1981-deh-el-2920. qty/set. = 01 no. 2) rear c over as per m/s. rotomag part no. 4-1982-ceh-el-2921. qty/set. = 01 no. [ warranty period: 30 months after the dat e of delivery ] ]
supply of toh( aoh) kit for pantograph assembly type ir -03h as per rdso smi no rdso /el/2016/s mi/0292, rev.-o dt. 27.06.2016 , one set consisting of 19 items 38 nos (1) key washer , qty= 2 nos , oe m part c01550. (2) piston packing ring , qty= 1 no , oem part no. c01870. (3) valve , qty=1 no , oem pa rt no. c01920 (4) joint for valve , qty= 1 no oem part no c01930, (5) valve guide , qty=1 no oem part no .c01940 (6) piston ring , qty=1 no , oem part no c01950 (7) 'o'ring,qty.=01 no,oem part no. c019130(8 ) gasket, qty.=02 no,oem part no. c019100(9)spring,qty.=02no. oem part no. c0h15660(10) insulating washer , qty.=04no. oem part no. c015650(11)bush,qty.=02no.oem part no. c01770(12)screw with nut ,qty=02no. oem part no. c0h630(13)split pin 4x56,qty=02 no,oem part no.c00180001(14) split pin 1.5x 45,qty.=02no.,oem part no. c001930001(15)split pin 3x30,qty=06no. oem part no. c0060003(16)split p in 2.5x30,qty.=02no. oem part no. c0090004(17)split pin 2.5x30,qty.=02no.oem part no. c0040006(18) split pin 2.5x30,qty=02no. oem part no. c00120015(19)split pin 4x56,qty.=02no. oem part no. c001700 01 as per drg.no. --- as per specn. rdso smi no rdso /el/2016/smi/0292, rev.-o dt. 27.06.2016 [ war ranty period: 30 months after the date of delivery ] ]
supply of sub kit aoh-2a for tap changer n-32 as per annexure-q2 of pdso tc no.rdso/2010/el/t c/0102 (rev-2). one kit consisting of 07+02 (hardware items as per annexure aoh-hw-2) [ warranty p eriod: 30 months after the date of delivery ] ]
supply of components for clamp-type ground connection for irs point machine 220mm stroke. details specification as per annexure. [ warranty period: 30 months after the date of delivery ] ]
supply of kit for brake gear bushes for bmbc coaches, hanger for bolster spring suspension, densified resin impregnated compressed plywood, plated hex nut with torx screw for atl, axle box pivot bush, knuckle pivot pin with washer, double acting hydraulic shock absorber, poh kit for c3w distributor valve, slack adjuster type irsa-600 complete, flex ball cable (l-2197 mm), air hose coupling support, inj. antihemophilic factor viii 500 iu, inverter based mig/mag, hydraulic re-railing equipment with all accessories, coil spring scragging machine, rail cum road shunter (diesel operated), rate contract for supply of plassar make spares for track machines for the years 2026-27 and 2027-28., light diesel oil (ldo), set of damper (shock absorbers),
supply of bellow fuel limiter- ww part no-(5219-002) [ warranty period: 30 months after the date of delivery ] ]
supply of provision of msus as per annexures d (medha emu) [ warranty period: 30 months after th e date of delivery ] ]
supply of provision of msus as per annexures e. (ac/dc emu siemens coaches) [ warranty period: 3 0 months after the date of delivery ] ]
supply of provision of msus as per annexures f. (bhel traction air conditioned emu suburban train) [ warranty period: 30 months after the date of delivery ] ]
supply of non ac area ceiling arrgt. for lhb ac 3-tier coaches as per drg. no. le44005 alt-e. i ndustrial lock to drg no. lw44158 alt-d/lw44318 alt-c. adhesive u bond 301 to be used where e ver adhesive appears in the drawing and as per condition list no.mp/fur/cond/03.colour sche me shall be applicable as per letter no. rbl-md46271 (part-1 dated-19.03.2024 packing instruction no .pi019 ver1.0 or pi193 ver1.0 [ warranty period: 30 months after the date of delivery ] ]
supply of set of hardware items for fixing carden shaft of beml make 8w ohe car. 1.hexagon scr ew - m14x50l, p.c-10.9 conforming to beml part no. cfs01 31450. qty.- 01 no/set. 2.nyloc nut-m14 co nforming to beml part no. cfn24 21415. qty.- 01 no/set. 3.spring washer- b14 conforming to beml part no. rfw09 11430. qty.- 01 no/set. [ warranty period: 30 months after the date of delivery ] ] sse/maintenance/lallaguda,
supply of set of outer labyrinth and outer bearing cap driving end (de) for wap7/wag9 traction motors type 6fra 6068 consisting of 2 items. set details as follows. 1) outer bearing cap de side as per clw drg no: 1twd.096.006 alt-8 or latest- 1 no/set. 2)outer labyrinth de side as per clw drg no: 4twd.096.029 alt-8 or latest:- 1 no/set. [ warranty p eriod: 30 months after the date of delivery ] ]
supply of elastic rail clip(erc) j clip with higher toe load for fish plated joint /insulated glued joint on psc sleeper drg: (rdso) rdso_t_8258_ alt_1 spec: (rdso) irs/t-31-2025 sixth revis ion [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] dsd/bilaspur, secr
corrigendum : supply of brake shoe, equivalent to plasser part no.: wn146.730.k4 for csm, duo, t/exp, dts mach ine. part make: plasser or equivalent. note: material supplied by firm should be fitted on machine wit hout any modifications and all ports & mounting should match as per existing part on machine and all fun ction of item should work successfully. [ warranty period: 30 months after the date of delivery ] ]
corrigendum : supply of buffer spring, equivalent to plasser part no.: ud311.307 required for replacement on d ts machines. part make: plasser/machweld note: material supplied by firm should be fitted on machin e without any modifications and all ports & mounting should match as per existing part on machine and all function of item should work successfully. note: authorized dealer certificate to be submitted with supply [ warranty period: 30 months after the date of delivery ] ]
supply of manufacturing and supply of high performance rail clamp (hprc) to be used with fish plates to rdso drawing no. t-5916 (length= 1000mm) of 60kg rails at track restoration sites & work sites applyi ng with specified torque of 400 to 580 nm. [ warranty period: 18 months after the date of delivery ] ] se(pway) , [p.way depot] sur,
supply of support, plasser part no. su1600.508.1.5 as per drawing no. secr/r/engg/tm/drg/su160 0.508.1.5. [ warranty period: 30 months after the date of delivery ] ]
supply and commissioning of light weight torque multiplier along with specialized reaction a rm for torque enhancer, modelno:ht92-25 awur of m/s norbar make or to model no.dvv-40z/part no.26 53087 of gedore make or its equivalent in bosch/chicago pneumatics or similar. technical specification det ails attached" [ warranty period: 30 months after the date of delivery ] ]
supply of -mdl tender title 69240dc1aa 2102-dcu 2. item details s.no. pl code item stock / ordering consider approving inspection currency estimated (group) type nonstock for eval agency agency allowed rate gst(y/n) 1 29721714 goods (y) stock --- yes tpi agency inr description :dcu card of bhel make igbt power converter, bhel material description: -mdl 69240 dc1aa 2102-dcu [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
supply of support, plasser part no. re11.09.3005 sub. re20.304 as per drawing no. secr/r/engg/tm/drg/re11.09.3005. [ warranty period: 30 months after the date of delivery ] ]
supply of set of contact rings for tap changer no.32.[one set consisting of 2 items 2 nos. i] contact ri ng[inner]adtranz's part.no-s-1608 as per rdso drg. no.skel 4653 sheet no.1 and 2 qty 1 nos.2]cont act ring [outer] adtranz's part no.s.1609 as per rdso drg no.skel 4654 sheet no.1 and 2,qty.1 no. [ warranty period: 30 months after the date of delivery ] ]
supply of set of sand pipe assly. rh & lh for wag-9 loco as per drg. no. trs/gmo/m-1/wa g-9/012 & 013 alt-1. [ warranty period: 30 months after the date of delivery ] ] electric loco shed daund, cr
supply of poh kit for d.v keo type consisting of 48 items as per enclosure. [ warranty period: 36 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted : max 8 lacs ] ] amm-d(wrw) bd, cr
supply of spring loaded side bearer assembly for blcs wagons as per drg. no. wd-12008-s/01, alt-3. [ war ranty period: 60 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of ball joint traction lever to fiat drg no.c53 973 ref bred 8403 rev. 02 r1 (ff 1521728 m od 01)to be read with technical specification no. 17 532 100 00 amendment no. 1 of june 2019, 17 617 100 02, mdts-148 rev 01 and mdts-122 rev-03. note: traceability marking as per rcf letter no md 2 3311 dated 21/06/2022. [ warranty period: 48 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted : max 8 lacs ] ] coaching depot ltt, cr
supply of high gloss based synthrtic resion for exterior finishing to is-8662/2004 [se cond revision], matching indian standard colour smoke grey isc no.692 as per is 1993-692 and wet opacity 20 sq.mtrs. per liter. packing in 20 ltrs. new non-returnable m.s. drum to is:2552/89,gr.b-ii. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
corrigendum : supply of set of spring guide to icf drg. no. t-0-5-612, alt. s/4, item no. 2 and 3. (one set consist ing of item no. 2, qty. 2 nos. & item no. 3, qty. 01 no.) material and specification as per drawing. [ w arranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
supply of pan mortar m.s. 400 mm dia x 150 mm deep thickness 1.5mm -1.6mm with handles wei ghing 2.48 kgs minimum with stamp of central railway as per drg no gm/w/bb/4464/d. [ warranty pe riod: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] smm (g) currey road, cr
supply of feeders-1 &2 and bus coupler, power contactors, 3pole, 1000v ac, 50hz, suitable for 500 kva, 750v ac on load switching under ac-6a category at temperature of 70 degree ce ntigrade & coil voltage of 110volt dc +25%-30% with surge suppressor, 2no+2nc, as per rdso spec no. rdso/pe/spec/d/tl/0195-2019 (rev.-0) suitable for switch board cabinet for hog compli ant lslrd coaches. make - abb (model no.af1250-3011) or l&t ( model no. mvo820) or siemens (mod el no. 3tf69338df4z a02 +3tx757213h) [ warranty period: 30 months after the date of delivery ] ]
supply of forked collar socket, stainless steel a4 s65 type gi40/30, b16, complete with ss pin & bolts , (part no. 610.064.000) of arthur flury make ptfe type short neutral section assembly [ warranty period: 30 months after the date of delivery ] ]
supply of lever lateral-3 position actuation valve 1/2 inch bsp parallel female , 5/3 closed centre func tion working temperature -5 c to +70 c, maximum working pressure 0 to 10 bar. ( part no. : 21253319) qt y-04 nos [ warranty period: 6 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of air flow meter with duct holder including attachment clip and batteries. [ warranty period: 30 months after the date of delivery ] ] sse/upper frame/crw/hrt,
supply of wing handle with key of material stainless steel equivalent to dirak part no. 352 - 2199.04 - 00000 suitable for switchboard cabinet of lhb ac coaches confirming to rdso spec rdso/pe/spec/ac/018 4-2015 (rev.1). material is dirak part no. 352 - 2199.04 - 00000 or equivalent part of south co. or arihant o r darshana. [ warranty period: 30 months after the date of delivery ] ]
supply of casnub 22 hs cast steel bogie with friction damping arrangement as per drawin g no.- wd-04078- s-01 alt. 03 or latest (item no.- 1 to 18 except 4,6,7,8 & 9) to rdso specification no.- wd-17-casnub-22 hs bogie-92 rev. 03 of sept-2004 with ammendment 6 or lat est. [ warranty period: 72 months after the date of delivery ] ]
supply of supply of casnub 22 nlb bogie with friction damping arrangement as per drg. no.- wd-890 73-s/2, alt-11 or latest, item no. 1 to 18, except item no.- 4,5,6,7,8,9." specification-wd-21 casnub-22-nl b-bogie-93 (rev.- 02 of july-2002) with amendment no.-06 of july-20 or latest. [ warranty period: 30 mon ths after the date of delivery ] ]
supply of set of 'o' ring and plunger of m/s rotex magnet valve 3103(nc-4), one set consi sting of following items: 1.coil gasket rotex part no.35, qty:01 no. 2.guide 'o' ring rotex p art no.32, qty. 01no. 3. plunger assembly rotex part no.30, qty. 01 no. 4. m.a. 'o' ring rotex part no.22, qty:01 no. 5. body 'o' ring rotex part no. 20, qty. 01no. 6.q.e. piston rotex part n o.50.qty. 01 no. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted : max 8 lacs ] ]
supply of overhauling kit for mver pov port (breather port) of ercp for kbil make electric ccb sys tem of 3-phase locomotives. one set consist of 14 items in 14 nos. as per kbi kit no. xki/kit/03194. an nexure attached. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of overhauling kit for filter element (5 microns) with 0-ring for high reach pantograph ty pe- lx3600, make-ftrtipl to m/s ftrtipl kit part no.- ft0053911-115. each kit consists of 2 items in 2 nos.(1) filter element (5 micron), qty-1 no. and (2) o-ring. qty-1 no. [ warranty period: 30 mont hs after the date of delivery ] ] gsd/ghz, ecr
supply of composite grooved rubber sole plate(cgrsp) - 10mm thickness for use with wi der psc sleeper to drawing no. rdso/t-8746 suitable to rails 60 kg(uic) / 60e1 & 52 kg drg: (r dso) rdso/t-8747 alt-1 spec: (rdso) t- 55-2025 revision-01 [ warranty period: 96 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] dsd/bilaspur, secr
supply of bogie centre pivot bottom to rdso drg. no. wd-85079-s/2 item no.1 alt-29 [ warrant y period: 30 months after the date of delivery ] ] wsd/brwd, ecr
supply of set of sander assembly as per attached drawing no. 4tacma/97. item no. 1, 2, 3 & 4. one s et consist of 04 items on 01 no. each. note: the firm shall submit one sample for approval by the consigne e prior to bulk supply. [ warranty period: 30 months after the date of delivery ] ]
supply of set of labyrinth ring for nose suspended drive (msu tube) of wap7/ wag9. one set consis ts of following 10 items. 1) labyrinth ring as per clw drg. no. 1209.01.211.034 alt.1 or abb drg. no. ib0 16-00439 rev.3.qty/set=01 no. 2) labyrinth ring as per clw drg. no. 1209.01.211.031 alt.1 or abb drg. no. ib016-00426. qty/set=01 no. 3) labyrinth ring as per clw drg. no. 1209.01.211.032 alt.1 or abb dr g. no. ib016-00427. qty/set=01 no. 4) labyrinth ring as per clw drg. no. 1209.01.211.030 alt.1 or abb drg. no. ib016-00425. qty/set=01 no. 5) labyrinth ring as per clw drg. no. 1209. 01.211.029 alt.1 or a bb drg. no. ib016-00424. qty/set=01 no. 6) labyrinth ring as per clw drg. no. 1209. 01.211.035 alt.1 o r abb drg. no. ib016-00430. qty/set=01 no. 7) labyrinth ring as per clw drg. no. 1209.01.211.033 alt. 1 or abb drg. no. ib016-00428. qty/set=01 no. 8) labyrinth ring as per clw drg. no. 1209. 01.211.027 alt.1 or abb drg. no. ib016-00422 qty/set=01 no. 9) labyrinth ring as per clw drg. no. 1209.01.211.02 8 alt.1 or abb drg. no. ib016-00423 rev.3 qty/set=01 no. 10) supporting ring as per clw drg. no. 1209 .01.211.036 alt-1 or abb drg. no. ib016-00431 qty/ set - 01 no." confirming to specn.no.clw ms/3/201 alt-2. [ warranty period: 30 months after the date of delivery ] ]
supply of set of pneumatic crew friendly cab fittings as per clw spc. no. clw/ts/99/cf- 5 alt-9 or latest consisting of 12 items in 92 nos. as per attached annexure, firm should be clw approved vendor for their authorised dealer for brass fitting.. [ warranty perio d: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of breather for wag-9 gear case as per clw drg. no. 1209-01-313-020 with latest alteratio n. as per drg.no. as per description [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of shell items for icf/beml coach [lavatory angle size- 55x45x2 , 1250 long] to drg. no. crw/sk-447, alt. 2, item no. 6. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
supply of silent block (for high tensile tight lock centre buffer coupler with aar h t ype head and balanced draft gear) to escorts drg. no. sk 1532 and conforming to rdso specification no. rdso/2011/cg-03, rev-1, amdt-1. note: silent block/spheroelastic bearing shall b e of m/s gmt or m/s tvs makes only and necessary documents shall be submitted along with the supp ly of material [ warranty period: 48 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] mechanical &
LOADING...
LOADING...