FILTERS
supply of high gloss based synthrtic resion for exterior finishing to is-8662/2004 [se cond revision], matching indian standard colour smoke grey isc no.692 as per is 1993-692 and wet opacity 20 sq.mtrs. per liter. packing in 20 ltrs. new non-returnable m.s. drum to is:2552/89,gr.b-ii. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
View Insights
corrigendum : supply of set of spring guide to icf drg. no. t-0-5-612, alt. s/4, item no. 2 and 3. (one set consist ing of item no. 2, qty. 2 nos. & item no. 3, qty. 01 no.) material and specification as per drawing. [ w arranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
supply of pan mortar m.s. 400 mm dia x 150 mm deep thickness 1.5mm -1.6mm with handles wei ghing 2.48 kgs minimum with stamp of central railway as per drg no gm/w/bb/4464/d. [ warranty pe riod: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] smm (g) currey road, cr
supply of feeders-1 &2 and bus coupler, power contactors, 3pole, 1000v ac, 50hz, suitable for 500 kva, 750v ac on load switching under ac-6a category at temperature of 70 degree ce ntigrade & coil voltage of 110volt dc +25%-30% with surge suppressor, 2no+2nc, as per rdso spec no. rdso/pe/spec/d/tl/0195-2019 (rev.-0) suitable for switch board cabinet for hog compli ant lslrd coaches. make - abb (model no.af1250-3011) or l&t ( model no. mvo820) or siemens (mod el no. 3tf69338df4z a02 +3tx757213h) [ warranty period: 30 months after the date of delivery ] ]
supply of forked collar socket, stainless steel a4 s65 type gi40/30, b16, complete with ss pin & bolts , (part no. 610.064.000) of arthur flury make ptfe type short neutral section assembly [ warranty period: 30 months after the date of delivery ] ]
supply of lever lateral-3 position actuation valve 1/2 inch bsp parallel female , 5/3 closed centre func tion working temperature -5 c to +70 c, maximum working pressure 0 to 10 bar. ( part no. : 21253319) qt y-04 nos [ warranty period: 6 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of air flow meter with duct holder including attachment clip and batteries. [ warranty period: 30 months after the date of delivery ] ] sse/upper frame/crw/hrt,
supply of wing handle with key of material stainless steel equivalent to dirak part no. 352 - 2199.04 - 00000 suitable for switchboard cabinet of lhb ac coaches confirming to rdso spec rdso/pe/spec/ac/018 4-2015 (rev.1). material is dirak part no. 352 - 2199.04 - 00000 or equivalent part of south co. or arihant o r darshana. [ warranty period: 30 months after the date of delivery ] ]
supply of casnub 22 hs cast steel bogie with friction damping arrangement as per drawin g no.- wd-04078- s-01 alt. 03 or latest (item no.- 1 to 18 except 4,6,7,8 & 9) to rdso specification no.- wd-17-casnub-22 hs bogie-92 rev. 03 of sept-2004 with ammendment 6 or lat est. [ warranty period: 72 months after the date of delivery ] ]
supply of supply of casnub 22 nlb bogie with friction damping arrangement as per drg. no.- wd-890 73-s/2, alt-11 or latest, item no. 1 to 18, except item no.- 4,5,6,7,8,9." specification-wd-21 casnub-22-nl b-bogie-93 (rev.- 02 of july-2002) with amendment no.-06 of july-20 or latest. [ warranty period: 30 mon ths after the date of delivery ] ]
supply of set of 'o' ring and plunger of m/s rotex magnet valve 3103(nc-4), one set consi sting of following items: 1.coil gasket rotex part no.35, qty:01 no. 2.guide 'o' ring rotex p art no.32, qty. 01no. 3. plunger assembly rotex part no.30, qty. 01 no. 4. m.a. 'o' ring rotex part no.22, qty:01 no. 5. body 'o' ring rotex part no. 20, qty. 01no. 6.q.e. piston rotex part n o.50.qty. 01 no. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted : max 8 lacs ] ]
supply of overhauling kit for mver pov port (breather port) of ercp for kbil make electric ccb sys tem of 3-phase locomotives. one set consist of 14 items in 14 nos. as per kbi kit no. xki/kit/03194. an nexure attached. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of overhauling kit for filter element (5 microns) with 0-ring for high reach pantograph ty pe- lx3600, make-ftrtipl to m/s ftrtipl kit part no.- ft0053911-115. each kit consists of 2 items in 2 nos.(1) filter element (5 micron), qty-1 no. and (2) o-ring. qty-1 no. [ warranty period: 30 mont hs after the date of delivery ] ] gsd/ghz, ecr
supply of composite grooved rubber sole plate(cgrsp) - 10mm thickness for use with wi der psc sleeper to drawing no. rdso/t-8746 suitable to rails 60 kg(uic) / 60e1 & 52 kg drg: (r dso) rdso/t-8747 alt-1 spec: (rdso) t- 55-2025 revision-01 [ warranty period: 96 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] dsd/bilaspur, secr
supply of bogie centre pivot bottom to rdso drg. no. wd-85079-s/2 item no.1 alt-29 [ warrant y period: 30 months after the date of delivery ] ] wsd/brwd, ecr
supply of set of sander assembly as per attached drawing no. 4tacma/97. item no. 1, 2, 3 & 4. one s et consist of 04 items on 01 no. each. note: the firm shall submit one sample for approval by the consigne e prior to bulk supply. [ warranty period: 30 months after the date of delivery ] ]
supply of set of labyrinth ring for nose suspended drive (msu tube) of wap7/ wag9. one set consis ts of following 10 items. 1) labyrinth ring as per clw drg. no. 1209.01.211.034 alt.1 or abb drg. no. ib0 16-00439 rev.3.qty/set=01 no. 2) labyrinth ring as per clw drg. no. 1209.01.211.031 alt.1 or abb drg. no. ib016-00426. qty/set=01 no. 3) labyrinth ring as per clw drg. no. 1209.01.211.032 alt.1 or abb dr g. no. ib016-00427. qty/set=01 no. 4) labyrinth ring as per clw drg. no. 1209.01.211.030 alt.1 or abb drg. no. ib016-00425. qty/set=01 no. 5) labyrinth ring as per clw drg. no. 1209. 01.211.029 alt.1 or a bb drg. no. ib016-00424. qty/set=01 no. 6) labyrinth ring as per clw drg. no. 1209. 01.211.035 alt.1 o r abb drg. no. ib016-00430. qty/set=01 no. 7) labyrinth ring as per clw drg. no. 1209.01.211.033 alt. 1 or abb drg. no. ib016-00428. qty/set=01 no. 8) labyrinth ring as per clw drg. no. 1209. 01.211.027 alt.1 or abb drg. no. ib016-00422 qty/set=01 no. 9) labyrinth ring as per clw drg. no. 1209.01.211.02 8 alt.1 or abb drg. no. ib016-00423 rev.3 qty/set=01 no. 10) supporting ring as per clw drg. no. 1209 .01.211.036 alt-1 or abb drg. no. ib016-00431 qty/ set - 01 no." confirming to specn.no.clw ms/3/201 alt-2. [ warranty period: 30 months after the date of delivery ] ]
supply of set of pneumatic crew friendly cab fittings as per clw spc. no. clw/ts/99/cf- 5 alt-9 or latest consisting of 12 items in 92 nos. as per attached annexure, firm should be clw approved vendor for their authorised dealer for brass fitting.. [ warranty perio d: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of breather for wag-9 gear case as per clw drg. no. 1209-01-313-020 with latest alteratio n. as per drg.no. as per description [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of shell items for icf/beml coach [lavatory angle size- 55x45x2 , 1250 long] to drg. no. crw/sk-447, alt. 2, item no. 6. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
supply of silent block (for high tensile tight lock centre buffer coupler with aar h t ype head and balanced draft gear) to escorts drg. no. sk 1532 and conforming to rdso specification no. rdso/2011/cg-03, rev-1, amdt-1. note: silent block/spheroelastic bearing shall b e of m/s gmt or m/s tvs makes only and necessary documents shall be submitted along with the supp ly of material [ warranty period: 48 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] mechanical &
supply of buffer plunger with face plate, buffer spindle and hex. nut (assembly) to rdso sketch- 98145, alt. 11 and c.rly. alt. d, item nos. 3, 5, 6, 7 and 17. material and specification as per drawing. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] amm (cog) wb, cr
supply of switch plate assembly consisting 01 no 3-pin 6 amp modular socket with 02 n os 01 amp glass fuse & 01 no modular switch with indicator as per icf drg no icf/sk3-7-6- 036 with alt 'm' & conforming to is :3854 & is :1293. [ warranty period: 30 months after the dat e of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of phonic wheel for trainset bogies( m/s knorr bremse part no. c19281 & m/s faively part no. ft0053767-000) [ warranty period: 30 months after the date of delivery ] ]
supply of hydraulic pusher 60 ton for cbc draft gear removal arrangement, having operating pressure 250 kg/sq. cm, cylinder bore dia:125 mm, ram stroke : 90 mm and closing height - 190 mm, pump 3 cc/stro ke and maximum pressure 500 kg/sq.cm. one set consist of 04 items as follows:- (1) hydraulic pusher cylin der 60 tons - 1 no/set, (2) high pressure hydraulic hand pump 01 no/set, (3) pusher assembly bracket - 01 n o/set, (4) high pressure hydraulic hose - 3 mtr./set or similar arrangement. the removal arrangement shoul d be suitable for draft gear removal of 3 phase electric locomotives. [ warranty period: 30 months after the date of delivery ] ] sr.section engineer(bodyrepair)
supply of nose assembly (alcoa model no. 99-5014) for 7/8" lock bolts suiting to alcoa make installation tool model no: 2630. as per drg.no. huck model no.99-5014 [ warranty pe riod: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of manufacture and supply of fabricated anti creep device for 10125 mm curved switches with zu-1-60 thick web tongue rails b.g. (1673 mm) for 60 kg (uic) on psc sleepers as per rdso drg.no. rdso/ t-8782 & rdso/t-8783 complete with fittings (including 27 mm dia. hts bolt with nut to drg.no. rdso/t-8 786 & rdso/t- 8787and hardened packing plate to drg. no. rdso/t-8784 & rdso/t-8785) acd material s hall be structural steel confirming to the requirement of grade e-350/br of is: 2062-2011 "indian standard hot rolled medium and high tensile steel - specification"(seventh revision). notes : (i) the 27 mm dia hts bolt and nut shall be confirm to is:3757 & is:6623. the dimension of hts bolts and nuts shall be as per dra wing no. rdso / t-8786 & rdso/t- 8787. these bolt and nuts are shall be arranged and supplied by the su ppliers /tenderers. (ii) hardened packing plate shall confirm to is : 6649 and material 45c8 steel according to is:1570(part 2). the dimension of hardened packing plate shall be as per drawing no. rdso/t-8784 & r dso/t- 8785. hardened packing plate shall be arranged and supplied by the suppliers /tenderers. (the alte ration in drawing and specifications issued by rdso up to one month prior to tender opening date shall be applicable to this tender.) [ warranty period: 30 months after the date of delivery ] ]
supply of leading roof fixing threaded block as per els/bza drg. no. b/trs/aux/4/369, ref. no. 01 only for 3-phase locos. note:one sample should be got approved before effecting bulk supply. [ warranty period: 30 months after the date of delivery ] ]
supply of improved high tensile tight lock centre buffer coupler with aar h type head with transitio n screw coupling and its associated components and balanced draft gear for fitment on bg passenger coa ches conforming to rdso specfication no. rdso/2009/cg-22, rev.1 and also confirming to rdso specifica tion no. rdso/2011/cg-03, rev.3, amendment-1. one coupler set shall consist of the following 6 items: 1. tight lock coupler head with transition screw coupling and its associated components, qty-1 no/set 2. ba lanced draft gear, qty-01 no/set. 3. supporting device with fasteners, qty-01 no/set. 4. manual coupling device qty-01 no/set. 5. base plate with fasterners qty-01 no/set.6. support plate with fasterners qty-01 no/set. (note: silent block/spheroetlastic bearing shall be of m/s gmt or m/s tvs makes only and necessary documents shall be submitted along with the supply of material.) [ warranty period: 72 months after the date of delivery ] ]
supply of mini hinge and nut plate made of stainless steel 304 equivalent to dirak part no. 354 - 2160.04 - 00000 ( mini hinge) & 370 - 0438.04 - 00907 (nut plate). one set consists of 1 no. of mini hinge and 2 nos. of nut plates. make a cceptable : dirak, southco, arihant, darshana. oem or authorized dealer only to quote with documentary evidenc e. [ warranty period: 30 months after the date of delivery ] ] sse/ac/chz, scr
supply of wing handle with key of material stainless steel equivalent to dirak part no. 352 2199.04 - 00000 suitabl e for switchboard cabinet of lhb ac coaches confirming to rdso spec rdso/pe/spec/ac/0184-2015 (rev.1). material is dirak part no. 352 - 2199.04 - 00000 or equivalent part of south co. or arihant or darshana. [ warranty period: 30 mo nths after the date of delivery ] ] sse/ac/chz, scr
supply of key switch simulation (pos no 179) as per clw spec no- clw/es/3/0079 alt-a and abb document no3ehp585704r2222 or clw drg no clw/es/3/sk1/0079 alt-a. as per drg.no. clw drg no clw/es/3/sk1/0079 alt-a. specn: clw spec no- clw/es/3/0079 alt-a [ warranty period: 30 months a fter the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] dls/raipur, secr
supply of set of insulating rod for tm type hs-15250a as per sketch no. bsl/elw/sk.no.6024 alt.- 4 or latest consisting of 02 items 48 nos. quantity details are as follows: [1] insulating rod assembly fo r +&- support as per rdso drg. no. rdso-skel-4439 alt.-1 or latest, qty.-24 nos. [2] insulating rod as sembly for brush holder as per clw drg. no. 2twd 095.052 alt.-1 or latest, qty.-24 nos (note- latest a lteration issued as on the date of tender publishing will be applicable). [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of auxiliary interlock box for em contactor with 02 no. + 1 nc contacts to cl w drg no. 2twd -0291-053 alt-3. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] smm-d(d) itarasi, wcr
supply of set of material for irs electric point machine 143 mm throw as per specification no. irs-s: 24-2025 rev-3.0 01) base assembly set (143mm), detail as per annexure epm-06 02) cover assembl y in set. details as per annexure epm-08 i. terminal bracket-lh & rh. details as per annexure epm-09 ii. stopper drg. no. rdso/s-10965 alt - 1. per set . details as per annexure epm-10 iii. stopper washer, drg . no. rdso/s-10966 , qty-02 nos. per set. details as per annexure epm-11 iv. set of cover latch pin. deta ils as per annexure epm-12 v. cover locking hook assly, drawing no. rdso/s-10961. details as per anne xure epm-13 vi. crank handle assly as per no. rdso/s-10973 a-e alt. 1 & as per irs-s:24-2025 rev-3.0 03) key box assembly in set. details as per annexure epm-01, i. wiring set complete. details as per an nexure epm-02, ii. set of fasteners. details as per annexure epm-04, iii. ara terminal blocks made of pbt 6-way 25mm rdso spec. no. irs: s-75/2006. only valid iso-9001 (qms) certified firms who are included in rdso approved qap of electric pint machine irs 143mm stroke of s&t workshop byculla are eligible t o quote. [ warranty period: 30 months after the date of delivery ] ]
supply of brake rigging kit (consisting of 16 items) as per dlw drg no. k-1702009, alt-'g' or latest an d pt no.17021182. qty in per kit as per annexure a. 1.material must be procured from dlw/blw - approved source. 2.warranty certificate (wc) & test certificate (tc) are also required to be supplied. [ warranty perio d: 30 months after the date of delivery ] ] sr. section engineer (d)kalyan,
supply of bush cam roller fip lifter15mm to drg. no.tpe-16-0054 [ warranty period: 30 mo nths after the date of delivery ] ]
supply of bottom plate for entrance lh & rh as per drawing no. crws-sk-1043. 50% qty. should b e lh and 50% qty. should be rh. material specifications as per the mentioned in the drawing. [ warra nty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of 203 mm air brake cylinder with slack adjuster for memu (dmc & tc ), ( working s troke - 40 mm) conforming to rdso spec. c- k013, rev. 1, drg no : rdso/sk81200 , alt. 5 and rd so sk- 81057,item-2 in note-2,alt.11. the working stroke and maker's logo shall be embossed on the body for easy identification. brake cylinders shall conform to rdso str c-k013 (rev. 1) [ warranty period: 30 months after the date of delivery ] ]
supply of lavatory door arrangement for ac coaches to icf's drg. no. icf/std-5-6-011, col - i & ii, alt c (capital c), and rdso's specn. no.c-k513 [rev 1] of august 2023 and colour scheme of l avatory door will be rdso approved shade code ac-sp-02. (note: 50 nos. complete lavatory doors rh as per col- i and 50 nos. complete lavatory doors lh as per col- ii to be supplied). [ warranty period: 30 months after the date of delivery ] ]
supply of land surface liner size 03 x 24 x 105mm as per fig. 40 of rdso casnub bogie manual n o. g-95 rev-1 with amnd. no. 5 of june 2003, with latest revision and amendments. mat. spec. - is: 3885 (part-1)/1992, gr-iv, reaffirmed 2022 with amnd. no. 02 of july 2024, with latest revision and amendme nts [ warranty period: 30 months after the date of delivery ] ]
supply of set of coupling cap, double ferrule 10mm ss fittings as per clw spec. no. clw/ms/3/053 alt-21 or latest if any consisting of 03 items as follows. 1) coupling nut 10mm od. qty. = 500 nos./set. 2) front ferrule 10mm od. qty. = 1000 nos./set. 3) back ferrule 10mm od. qty. = 1000 nos./set. [ warranty period: 30 months after the date of deli very ] ]
supply of side stopper (rubber) for wag-7 loco as per clw drg. no. 06/3/1 5/47 'alt. 2 with lat est. [ warranty period: 30 months after the date of delivery ] ]
supply of zero toe load fastening system (ztlf) for h-beam sleepers for bg 60 kg rails as per rdso drawing no. t-8759 to t-8765. 1 set of fastening consists of 02 nos. of rail pad with embedded steel plate (t-8761), 02 nos. of special cast galvanized liner (inner) for 60 kg uic rail (t- 8762), 02 nos. special cast galvanized liner (outer) for 60 kg uic rail (t-8763) and 04 nos. erc mk-v (t-5919). [ warranty period: 3 0 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of throttle valve assly. to m/s sil new ref no. s0220110101 or m/s cpl part no. c01900 or m/ s gsec drg.no. gsec/panto/219 & cre ref no. 0101170 for am12/ir01/pan01/el-01 type pantograph. [ war ranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lac s ] ] smm-d jhansi, ncr
supply of standard hardware for tm type 6fra6068 wag-9/wap-7 locos, set consist of 14 items 87 n os as per sheet no.-02 of clw specn. no. 4tms.096.075, rev-1, alt-1. [ warranty period: 30 months aft er the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted : max 8 lacs ] ] smm/els/jhs, ncr
supply of supply and installation of floor cover sheet for train set/mc, tc, mc2, ndtc/ec,ndtc /ec2 to drawing ts/mc-4-1-002, col-ii and as per rcf annexure-e enclosed. please visit icfvendor portal for downloading drawing http://vp.icf. gov.in/vendtendordetnew.php using key: 0721l9q8el32522 [ warranty period: 30 months after the date of delivery ] ]
supply of m-12 poh kit for memu air dryer make: trident model no. ld 2000132, part no.as 882 consis ting of 06 items as furnished below- (1) filter element to part no ad433 - 01 nos. (2) filter top cup to part no, cd668 - 01 nos. (3) filter bottom cup to part no, cd669 - 01 nos. (4) spare kit filter bottom to part no, as443- 01 nos. (5) spare kit valve double poppet to part no, as444- 01 nos (6) filter element m250y to par t no, ac077- 01 nos. [ warranty period: 30 months after the date of delivery ] ]
supply of supply of fixing clip 72 mm dia. confirming to rcf drg. n0: lp63137 ]
supply of poh kit for adapter plate assembly/intermediate piece of c3w type d.v. of freight stock as per greysham drg.no.-g/c3w/78868308 item no.12,13 & 14, one set consists of following items-1. o ring, gipl part no.gi/c3w/0015/149 qty.-2 nos/set, 2.vave assembly,gipl part no.gi/c3w/192057 qt y.1no/set 3.spring gipl part no.-gi/c3w/192058 qty.1 no/set.make-gipl ,sil or equivalent. specn: con firming to rdso specification 02-abr-02 [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
LOADING...
LOADING...