HomeTendersEastern Railway TendersCable Laying Tenders

Latest Cable Laying Tenders in Eastern Railway

Find the latest cable laying tenders in eastern railway for 2026 from government departments, corporations and state PSUs. Get tender details and bidding information.

FILTERS

Category: Cable Laying

Organization: Eastern Railway

4 Live Cable Laying Tenders in Eastern Railway 2026

Select All

T247 ID-104038736 |Bid Value:₹ 1.12 Cr. |EMD:₹ 2.23 Lakh |25-09-2026 3 Days Left

general electrification work in connection with "replacement of old dilapidated steel overhead tank by rcc overhead tank with repair/improvement of distribution pipe lines at gursahaiganj, kaimganj, kasganj, gunjdundwara stations", "provision of deep tube well along with rcc overhead tank at farrukhabad, hathras city & mathura cantt & rcc overhead tank at mathura cantt near mathura junction", "provision of 2nd platform with fob and 04 unit type -ii staff quarters at ganj dundwara (gwa) station", "provision of quarters on replacement base 14 nos type-ii qtr. at sikandra roa station", "provision of platform no.2 & cop at sikandra roa station" and leftover works under "improvement & strengthening of power supply, lightig arrangement & replacement of existing lt overhead lines by underground cabling at station colony (rpo, kap, crb, bjr, blu, ssd, kmj, dro & fgr) of fatehgarh section" over izzatnagar division.

Izatnagar, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104517323 |Bid Value:₹ 43.03 Lakh |EMD:₹ 86.10 K |12-10-2026 20 Days Left

provision of yard illumination at tak stabling yard. - gi tubular pole of overall length 3m with single/double arm bracket with top cover 01 including hinged door in built in box complete with copper bar/ insulator /hylam sheet for cable termination and fuse kit-kat/mcb. make :bp project, utkarsh, bajaj or similar. 002 50.00 numbers 3050.44 152522.00 at par 152522.00 description:- rcc foundation, erection and commissioning of above gi pole with construction of 02 cement concrete muffing (cement : stone : sand = 1 : 2 : 4) with foundation accessories including earthing of pole with 1 no. of 50 mm dia, 3 m long gi pipe. 003 100.00 numbers 550.84 55084.00 at par 55084.00 description:- supply of street light 60 watt led (type of led - surface mounting device) luminaire, pressure die cast housing with ingress protection - ip66 or higher (led make: - nichia, osram, seoul, 03 philips, lumileds, avago, cree ) complete with all accessories. led efficacy - minimum 120 lumens / watt @ 350ma, impact resistance: ik-05 or higher color temperature: 5700k, driver surge protection minimum 4kv, life span of led chip - greater than 50000 burnings hours with 60 months warranty. 004 24.00 numbers 2690.00 64560.00 at par 64560.00 description:- supply of flood light 300 watt led (type of led-surface mounting device) luminaire, pressure die cast aluminium housing with ingress protection-ip66 or higher (led make: - nichia, 04 osram, seoul, philips, lumileds, avago, cree.) complete with all accessories, led luminaire efficacy - minimum 130 lumens /watt @ 350ma, impact resistance: ik-05 or higher color temperature: 5700k, driver surge protection minimum 4kv, life span of led chip - greater than 50000 burnings hours with 60 months warranty. 005 124.00 numbers 177.58 22019.92 at par 22019.92 05 description:- fixing, connection and commissioning of outdoor flood light/street light fitting on high mast tower/ pole/structure/rolling in out examination with suitable arrangement. 006 3000.00 metre 291.00 873000.00 at par 873000.00 06 page 1 of 4 run date/time: 21/09/2026 12:46:49 howrah division-electrical/eastern rly tender document tender no: els-hwh-10-568-emu-rt-1 closing date/time: 12/10/2026 12:00 06 description:- supply cross linked polythelene (xlpe) insulatd , pvc outer sheathed stranded & shaped aluminium conductor cable of size 4 core , 25 sq.mm with galvanized steel strip aroumouredsuitable for rated voltage at 1100 voltts grade and confirmimg to is 7098 part-1-1988 with ammendement number 1 and 2 and 3 reaffirmed 2005. make:- m/s polycab, kei, phinolex, mescab. 007 2800.00 metre 159.30 446040.00 at par 446040.00 description:- trenching and laying of cable underground by soil cutting through suitable dia hdpe 07 pipe without sand and bricks including refiling of trench byexcavated soil and makegood of surface as its originalcondition. make:- m/s.sudhakar, nagarjuna,nandi,polymers ,narmada,kc polymer. 008 200.00 metre 1426.12 285224.00 at par 285224.00 description:- laying of cable underground through 100mm diameter hdpe pipe by micro tunneling 08 cable laying method including supply and jointing of hdpe pipe (pe-100 grade, pn-10 or higher). make:- m/s.sudhakar , nagarjuna, nandi, polymers, narmada, kc polymer. 009 1600.00 metre 485.22 776352.00 at par 776352.00 description:- trenching, laying under road / track through 100 mm dia gi pipe including supply of 09 gi pipe and commissioning of cable including back filling of trench with excavated soil after laying of cable complete confirming to is:1239(part-i)2004. 0010 1.00 numbers 107750.00 107750.00 at par 107750.00 description:- lt cubicle type distribution panel board made of 14 swg (2mm) ms sheet duly 010 powder coated comprising with following: a) mccb , 4p, 160-200, 415 v, 50 hz, 36a- 02 nos. b) mccb , 4p, 50-63a, 415 v, 50 hz, 25ka, - 6 nos. c) tinned copper busbar (4nos. bar) each of capacity 300a, 415, 50 hz: - 1set. 0011 2.00 numbers 2300.31 4600.62 at par 4600.62 description:- earthing by two nos. gi pipe 50mm dia x 3m long heavy gauge (make tata / jindal) 011 including construction of one earth pit along with necessary earth connection from pit by 25mm x 4mm gi flat with gi nuts & bolts. 0012 1.00 numbers 185292.30 185292.30 at par 185292.30 description:- supply of high mast tower of 20 mtr. height in two sections suitable for a wind speed of 180 km/hr. ( 50 m/s ) made from steel plates and continuously tapered of polygonal cross section. the entire mast should be hot dipped galvanised after fabrication internally and externally in accordance with bs 729. all steel used in the construction of mast complies with bs en 10 025 of appropriate grade and welding is in accordance with bs 5135 and comprising with lighting finial & 012 earthing terminal, top pulley assembly, double drum winch, head frame & lantern carriage, stainless steel wire rope having 7/ 19construction ( the central core is also ss ) with a grade of aisi 316 of breaking strength 2350 kgs, winch driving power tools (motor), multi core flexible round and sheathed copper power trailing cable (2 nos.) with cable junction box (2 nos.) including aviation obstruction warning light, timer for automatic switching operation of luminaires and all other accessories. make:-utkarsh, bajaj, bp project or similar. 0013 1.00 numbers 13784.20 13784.20 at par 13784.20 description:- design and construction of rcc foundation depending upon the height, wind speed and terrains including erection, testing and commissioning of above high mast tower including 013 foundation accessories alongwith earthing with 2 nos. of 50 mm dia, 3 mtrs. long heavy gauge gi pipe ( make: -tata/jindal ) with construction of earth pit and necessary earth connection from pit to tower by two separate 40mm x 6mm gi flat with gi nut-bolts. 0014 800.00 metre 362.00 289600.00 at par 289600.00 description:- cross linked polyethelene ( xlpe ) insulated pvc outer sheathed stranded & shaped 014 aluminium conductor cable of size 4 core, 50 sq mm with galvanized steel strip armoured suitable for rated voltage at 1100 volts grade and conforming to is : 7098 part-1- 1988 with amendment number 1 and 2 and 3 reaffirmed 2005. 0015 2.00 numbers 7663.00 15326.00 at par 15326.00 description:- ms box of size 1950mm (l) x 575mm (h) x 420mm (w) for lighting arragement for rolling in/out examination with 'v' shape top cover of suitavle size.(the box will be made from ms sheet of 2mm thickness 'ms flat of size 30mmx6mm, ms angle of size 25mmx25mm x5mm. front 015 cover-ms expended materials 2.54 cmx2.54cm suitable hinge.back cover-ms sheet 2mm with 2.54cm dia perfortion ,fitment of light -flat of size 30x6mm and angle of size 50mmx50mmx6mm to be fitted inside the box for fitting of led light, paints -reflection pain to be painted inside the box,pu paint to be painted after propoer treatment of sheet at outside the box) including designe,fabrication and installation of ms box. 0016 2.00 numbers 16923.00 33846.00 at par 33846.00 description:- outdoor pillar box type control panel board made of 14swg (2mm) ms sheet duly powder coated comprising with the following. a) mccb with thermal-magnetic release of breaking capacity 36ka at 415 ac, 50hz(lcs=100% lcu ) suitable for releasae range 25-32a ,4 pole -1 no. 016 b)astronomical timer switch-2 nos. c) power contractor ,3pole ,18a, 415v, 50hz-2 nos. d) led indication lamp for 3-phases for incoming feeders and "on off, trip" indication for all incoming and outgoing feeders.-10 nos. complete with fabrication ,internal wiring by single core copper conductor cable and all other accessories for above panel. page 2 of 4 run date/time: 21/09/2026 12:46:49 howrah division-electrical/eastern rly tender document tender no: els-hwh-10-568-emu-rt-1 closing date/time: 12/10/2026 12:00 0017 1.00 numbers 656352.19 656352.19 at par 656352.19 017 description:- gst @ 18% on sum of sl. no. 01 to 16 3. item breakup no item break up added 4. eligibility conditions 5. compliance commercial-compliance s.no. description confirmation remarks documents required allowed uploading please enter the percentage of local content in the material being offered. please enter 0 for fully imported items, and 100 allowed 1 for fully indigenous items. the definition and calculation of localno yes (optional) content shall be in accordance with the make in india policy as incorporated in the tender conditions. custom s.no. description confirmation remarks documents required allowed uploading affidavit :- the tenderers shall submit a copy of certificate stating that all their statements/ documents submitted along with bid are true and factual. standard format of certificate to be submitted by the bidder is enclosed as annexure-v (attached). non submission of above certificate by the bidder shall result allowed 1 summarily rejection of his/ their bid. it shall be mandatory yes yes (mandatory) incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested / digitally signed by which the / he is qualifying the qualifying criteria mentioned in the tender document. (ref: gcc april 2022 (updated upto acs - 11, dtd. 13.03.2026 or latest). the authority for the acceptance of the tender will rest with the railway. it shall not be obligatory on the said authority to accept the lowest tender or any other tender and no tenderer(s) shall 2 no no not allowed demand any explanation for the cause of rejection of his/their tender nor the railway undertake to assign reasons for declining to consider or reject any particular tender or tenders. if the tenderer(s) deliberately gives/give wrong information in his/their tender or creates/create circumstances for the 3 no no not allowed acceptance of his /their tender, the railway reserves the right to reject such tender at any stage. bidder must be filled properly the format (i.e. annexure - d) for declaration of association with railway officers and then upload allowed 4 yes yes through e-tendering duly digitally signed of authorized bidder. (mandatory) otherwise offer of the firm shall be considered as invalid. the entire form of tender (fot, here under chapter-i, page no. 3 - 10 of this bid) must be uploaded through e - tendering duly allowed 5 yes yes filled and digitally signed. otherwise offer of the firm shall be (mandatory) considered as invalid. valid electrical contractor license in the name of the firm issued by state / central government must be uploaded through e- allowed 6 yes yes tendering duly digitally signed. otherwise offer of the firm shall (mandatory) be considered as invalid. if the firm is a partnership firm/joint venture (jv)/hindu undivided family (huf)/limited liability partnership (llp) etc., the tenderers shall submit a copy of certificate that has to be given by attorney/authorized signatory/each member of allowed 7 yes yes partnership firm/joint venture (jv)/hindu undivided family (mandatory) (huf)/limited liability partnership (llp) etc. enclosed as annexure-v/a (attached). non submission of above certificate by the bidder shall result summarily rejection of his/ their bid. scanned copy of valid gst (goods & service tax) registration allowed 8 yes yes certificate. (mandatory) page 3 of 4 run date/time: 21/09/2026 12:46:49 howrah division-electrical/eastern rly tender document tender no: els-hwh-10-568-emu-rt-1 closing date/time: 12/10/2026 12:00 documents in support of following shall be included along with tender document :- i) copy of valid trade license (digitally allowed 9 signed). ii) copy of pan (digitally signed). iii) copy of credential no no (optional) if any (digitally signed). iv) copy of last year it return (digitally signed). 6. documents attached with tender s.no. document name document description 1 biddoc568rt1.pdf bid doc rt 1 this tender complies with public procurement policy (make in india) order 2017, dated 15/06/2017, issued by department of industrial promotion and policy, ministry of commerce, circulated vide railway board letter no. 2015/rs(g)/779/5 dated 03/08/2017 and 27/12/2017 and amendments/ revisions thereof. as a tender inviting authority, the undersigned has ensured that the issue of this tender does not violate provisions of gfr regarding procurement through gem. signed by: koushik pan designation : sr.dee/emu page 4 of 4 run date/time: 21/09/2026 12:46:49

Howrah, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104472274 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |01-10-2026 9 Days Left

supply of cable lug of size 185 sq.mm. type 185/m12 cu vzn confirming to clw spec no. clw/es/3/0 130 alt-n or latest. and dimensions except the hole as per abb id no. #ehp470026p4820 fig. no. 39. [ wa rranty period: 30 months after the date of delivery ] ] - cable lug of size 185 sq.mm. type 185/m12 cu vzn confirming to clw spec no. clw/es/3/0130 alt-n or latest

Bokaro, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104187466 |Bid Value:₹ 29.16 Cr. |EMD:₹ 58.31 Lakh |05-10-2026 13 Days Left

modification of 33 kv / 11 kv / 0.4 kv over head power line, which is infringing due to falling in alignment of under construction 3rd & 4th line between gonda kacheri to goldenganj section, 3rd & 4th line between burhwal-sitapur section, 3rd line between aunrihar-varanasi section, kld-brk (ph-ii & ph-iii) new line and cpa-mda elevated track.

Varanasi, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW