FILTERS
supply of hex. head bolt & nut m10 x 50 mm product grade 'c', m.s.black. matl.& specn : is: 1363 (part - 1) / 2023 (6th rev.) and is: 1363 (part - 3) / 2018 (5th. rev.), property class 4.6 for bolt and pro perty class 5 for nut. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] workshop wagon stores/kgp, - hex. head bolt & nut m10 x 50 mm etc.
View Insights
supply of fs all steel lock nut m12 property class-10 (1) zinc flake coating (geomet321 or equi valent) with top coat, without any hexavalent chromium, without any integrated or separately added lubric ant. minimum salt spray test life of 1000 hours is to be ensured. (2) fs all steel lock nuts. dimensions of nut shall be as per din 6925/din 980m. nut shall be of make m/s flaig hommel gmbh germany special condi tion: suitable packing to be done to prevent damage during transit, unloading and rust prevention during st orage. [ warranty period: 30 months after the date of delivery ] ] - procurement of fs all steel lock nut m12 property class-10 (1) zinc flake etc.
supply of hex nut m24 - prevailing torque type to specn. no. din 6925/din 980v, is: 1367(pt.8)/2020, a3b of is:1367(pt.11)/2020 [ warranty period: 30 months after the date of delivery ] ] - procurement of [hex nut m24 - prevailing torque type to specn. no. etc.
supply of a set of escorts design apm spares consisting of : (1) sensor bolt = 1 no. (escorts drg. no. 4 eb4781 or similar). (2) hexagon nut m10 x 1 = 1 no. (escorts drg. no. 1/50125100000 or similar). (3) hex nylock nut m10 x 1 -din 982 = 1 no. (escorts drg. no. 1/1011041000 or similar). [ warranty period: 30 months after the date of delivery ] ] - apm spares
supply of nyloc nut m 16 to is.specn.no.7002-2018(reaffirmed 2023) ,property class-8 of make tvs/tuff/dfl/unbrako or similar. [ warranty period: 30 months after the date of delivery ] ] - nyloc nut m 16
supply of m12 x 110 hex head bolt with hex nut and spring washer as per schedule(i) m12 x 110 long hex head bolt is: 1364 (part- 1)/2002 p8.8 (galvanised) qty.-01 per set. (ii)m12 hex nu t is:1364 (part-3)/2002 p8.0 (galvanised) qty.-01 per set. (iii)b12 spring washer is:30 63/1994 type-b (reaffirmed 2021) with amendment no 1(galvanised) qty.-01 per set. [ warranty period: 30 months after the date of delivery ] ] - m12 x 110 hex head bolt with hex nut and spring washer etc
supply of set of bracket for 12 mm additional safety sling for compressor. as per els/tata drg.no. rs/ tata/misc/35/18 alt-1 is attached. a set consist of 04 items in 04 nos are as follows:- (1) bracket assembly- steel is 2062:2011 (bo), qty-01 no. (2) hex head bolt m-16, 65 mm l-steel, en: 24, qty-01 no. (3) hex nut m-16, steel, en: 13889, qty-01 no. (4) split pin 25x20 long- steel, is: 549, qty-01 no. [ warranty period: 30 months after the date of delivery ] ] - set of bracket for 12 mm additional safety sling for compressor. as per els/tata drg.no. rs/tata/misc/35/18 alt-1 is attached. a set consist of 04 items in 04 nos are as follows:- (1) bracket assembly-steel is 2062:2011 (bo), qty-01 no. (2) hex head bolt m-16, 65 mm l-steel, en: 24, qty-01 no. (3) hex nut m-16, steel, en: 13889, qty-01 no. (4) split pin 25x20 long- steel, is: 549, qty-01 no.
supply of fs all steel lock nut m-16 as per abb's drg. no. 182-00493 (rev. - 3) (article no. - 005) & clw's spec. no. - clw/ms/3/089 (rev. - 1 of april 2007) (alt. 3). to be procured from clw approved source only. [ warranty period: 30 months after the date of delivery ] ] - fs all steel lock nut m-16 as per abb's drg. no. 182-00493 (rev. - 3) (article no. - 005) & clw's spec. no. - clw/ms/3/089 (rev. - 1 of april 2007) (alt. 3). to be procured from clw approved source only.
supply of lock nut for impeller of traction motor type 4601 az for bhel emus. kpa drg. no. er/k pa/el/tm.4he.2597b. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] - lock nut for impeller of traction motor type 4601
supply of set of spare parts of vertical support assembly for cbc. one set consists o f special allen bolt escorts part no. sk-1535, with castle nut m 16 x 2 (is:2232), split pin m 5 x 40 (is:549), washer (top) escorts part no. sk 1536, washer bottom escorts part no. sk 1537, and conical washer escorts part no. sk 729. to rdso spec no. rdso/2011/cg-03, ( rev-01). [ warranty period: 30 months after the date of delivery ] ] general stores depot - set of spare parts of vertical support assembly for cbc. one set consists of special allen bolt escorts part no. sk-1535, with castle nut m 16 x 2 (is:2232), split pin m 5 x 40 (is:549), washer (top) escorts part no. sk 1536, washer bottom escorts part no. sk 1537, and conical washer escorts part no. sk 729. to rdso spec no. rdso/2011/cg-03, (rev-01).
supply of high tensile hexagonal head bolt full threaded m 8 x 40 mm long (is: 1364, pt.-ii, 8.8 )%a0with one no. spring washer (is: 3063), one no. plain washer (is:2016), one no. hexagonal nut.
supply of under frame area cable cleat fitting nut- bolt with nylok full thread type , size- 100 mm long , bolt - 10mm nylok nut ( as per sample) [ warranty period: 30 months after the date of delivery ] ] - under frame area cable cleat fitting nut- bolt
supply of hexagonal head bolt m 8 x 50 mm long full thread to is: 1364 (part- 2)-2002, 4.6 with 1 no. spring washer to is: 3063 -1994 (reaffirmed 2021) with amendment no 1,2 n os. plain washer to is: 2016-1967 (reaffirmed 2021) with amendment no 2, 3 & 4 ,2 nos. hex agonal nuts to is 1364 (part-3)-2002, all galvanized to is: 1367 (part- xiii)/1983, in assembl ed condition. [ warranty period: 30 months after the date of delivery ] ] - hexagonal head bolt m 8 x 50 mm long
supply of set of prevailing torque type hexagonal nut consisting of 03 items : (i) hex. nut : m24 qty. 3 nos . (ii) hex. nut: m20 qty. 3 nos . (iii) hex. nut : m16 qty. 3 nos . material & specn. no. as pe r rdso specn. no. rdso/cg/s/24005. note: grade & make should be clearly embossed at suitable loc ation of material (on peripheral face of nuts) for easy traceability & verification) [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] general stores depot - set of prevailing torque type hexagonal nut consisting of 03 items etc.
supply of high pressure rubber hose pipe with swivel nut suitable for working pressure of 20 kg/cm s q. size id- 8 mm ,od- 14.3 mm for sander pipe. [ warranty period: 30 months after the date of delivery ] ] - procurement of high pressure rubber hose pipe with swivel nut
supply of leader nut casing to drg no. wd 82064-s-07-rc, alt-6, item no.1. material an d specification as per drg. [ warranty period: 30 months after the date of delivery ] ] sse/wagon repaire shop/ - leader nut casing to drg no. wd 82064-s-07-rc, alt-6, item no.1. material and specification as per drg.
supply of straight union 10 mm with nut and ferrule in ss 316 as per ermeto drg. no. g10l or equiva lent. [ warranty period: 30 months after the date of delivery ] ] - procurement of straight union 10 mm with nut and ferrule etc.
supply of lead acid cell, low maintenance, 2 v in pp-cp container conforming to irs:s-88-2004 (w ith amdt. up to date if any). the cells should be complete with pp-cp container, tubular positive plate s, pasted negative plates, acid level indicating floats inter-cell connector with bolts & nuts. the cells ar e required to be dry & uncharged. capacity of each cell will be 300ah at 10 hrs. rate to discharge to 1 .85v per cell at 27 degree centigrade. without tool kit. [ warranty period: 30 months after the d ate of delivery ] ] - lead acid cell, low maintenance, 2 v/ 300ah etc.
supply of head nut for cutting torch as per sample, material:- brass. [ warranty period: 30 months af ter the date of delivery ] ] - head nut for cutting torch
supply of ht hex. head bolt size m20 x 110- 8.8 with prevailing torque type nut m20 an d punched washer a22 to icf drg. no.t-3-2-803, alt l/5, item no. 5, 18 & 19. [ warranty perio d: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] general stores depot izzatnaga, - ht hex. head bolt size m20 x 110- 8.8 etc.
supply of hand brake screw with nut to rdso drawing no. wd-05086-s-19 alt.-9, item no. 8 & 9. material and specification as per drawing. [ warranty period: 30 months after the date of delivery ] ] general stores depot izzatnaga, - hand brake screw with nut to rdso etc.
supply of set of stainless steel hex head bolt m10 x 45 mm (property class a2-70 to is 1367 : par t 14 : sec 1 : 2023 or latest) with m10 nyloc nut (property class a2-70 to is 1367 : part 14 : sec 2 : 202 3 or latest) and machined washer m10 (property class a2-70 to is : 2016 - 1967 reaffirmed 2001 or lat est), make - unbrako / tuff / dfl or tvs only. [ warranty period: 30 months after the date of delive ry ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] workshop carriage stores/kgp, - set of stainless steel hex head bolt m10 x 45 mm etc.
supply of high tensile hexagonal head bolt full thread m 12 x 50 mm long (is:1364, pt. 2,8.8) with split pin (2.5x 36mm, is:549) with one no. spring washer (is: 3063), two nos. plain washer (is:2016), one no. hexagonal nut (is:1364,pt.3) one no. hexagonal lock nut (is:1364,pt.4) split pin hole dia 3mm . and hole centre should be at a distance of 5mm. from the tail end. all assembled codition, except spl it pin to be supplied loose. [ warranty period: 30 months after the date of delivery ] ] - procurement of high tensile hexagonal head bolt full thread m 12 x 50 mm etc.
supply of set of hardware for battery box of lhb ac coaches. 1) hex. head bolt m16 x 70-8.8 confirmin g to specification iso: 4014/is: 1364 (part-1), a3p, and to fiat drawing no. 1.10113.0.76.700.001, item-007, alt.-a, qty.- 1 no/set. 2) hex. nut m16-8 confirming to specification din-982, a3p, and to fiat drawing no. 1. 10113.0.76.700.001, item-008, alt.-a, qty.- 1 no./set 3) washer a17, 200 hv confirming to specification din -125, a3p, and to fiat drawing no. 1.10113.0.76.700.001, item-009, alt.-a, qty.- 2 no/set. [ warranty peri od: 30 months after the date of delivery ] ] - procurement of set of hardware for battery box of lhb ac coaches etc.
supply of gas connection union having back fire resistance arrangement with 20 mtrs. long hose pipe of 10 mm dia to is:447/88 for da with nut & nipple and clamp fitted on the end. nut & nipple as per is:6016-2009, clamp as per is:4762-2002. [ warranty period: 30 months after the date of delive ry ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] - procurement of gas connection union having back fire resistance arrangement with 20 mtrs. long hose pipe of 10 mm dia to is:447/88 for da with nut & nipple and clamp fitted on the end. nut & nipple as per is:6016-2009, clamp as per is:4762-2002.
supply of hex nut m30 to is: 1364 (part 3)/2018 and is:1367(part -6)/2025, ce , property class -10 , coating as per rcf specification - mdts-057. grade & make should be clearly embossed at suitable l ocation of material (on peripheral face of nut) for easy traceability & verification. [ warranty period: 30 months after the date of delivery ] ] general stores depot - hex nut m30 to is: 1364 (part 3)/2018 and is:1367(part -6)/2025, ce , property class -10, coating as per rcf specification - mdts-057. grade & make should be clearly embossed at suitable location of material (on peripheral face of nut) for easy traceability & verification.
supply of set of bolt & stud for brake cylinder of 3-phase locos as per clw drg. no. 1209-01-116-059, alt a or latest up to tender opening date as follows. (1) ref. no. 52, hex. head bolt m16 x 1.5 pitch x 65m m, grade 8.8. qty/set. = 16 nos.(2) ref. no. 51, stud m16 x 55mm. qty/set. = 16 nos. (3) ref. no. 54, spri ng washer. qty/set. = 32 nos.(4) ref. no. 55, split cotter pin dia 3.5mm. qty/set. = 40 nos. (5) ref. no. 59, slotted nut m16 x 1.5mm. qty/set. = 32 nos.makes: unbrako/ tvs/ dfl/pfl/ bimco.note: one sample set s hould be got approved before effecting bulk supply. [ warranty period: 30 months after the date of delive ry ] ] - set of bolt & stud for brake cylinder of 3-phase locos.
supply of nut hex lock 1 -1/4 - 12 as per dlw drg. no.8360845 alt ca to dlw pt no: 193510 21. as per drg.no. dlw drg. no.8360845 alt ca specn: nil [ warranty period: 30 months after the date of delivery ] ] - nut hex lock
supply of m-20 csk head screw with nut.drawing no.: rdso's drg.no.-wd-85079-s-01 alt. 13, ite m no.13. material and specification : as per drawing. [ warranty period: 30 months after the date o f delivery ] ] - m-20 csk head screw with nut.
supply of high tensile fastner consists with (i) hex head screw m16 x 65mm (long) x 2mm (pitch, grade: 10.9 as per is: 1364 part-2/2002 qty. 1 no./set (ii) hex main nut m16 x 2mm (pitch) grade: 10 as per is: 1364 part-3/2002 qty. 1 no/set. (iii) hexagonal lock nut m16 x 2mm. (pitch), grade: 10 as p er is: 1364 part.-4/2003 qty 1 no./ set. (iv) plain punched washer type-a as per is: 2016 qty. 2 no./ se t (v) spring washer as per is: 3063 qty. 1 no./ set. (vi) split pin size: 3.2mm x 40 mm as per is: 549. s plit pin hole dia 4 mm. at a distance 8mm. from tail end. qty.1 no./ set all are in assemble. split pin to be supplied loose. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] - procurement of high tensile fastner consists with (i) hex head screw m16 x 65mm etc.
supply of stainless steel hexagonal head fully threaded bolt size m10 x 50 mm conforming to is: 1364 (part-1): 2002-1 no, plain washer size m10 conforming to is: 2016 - 02 nos, flat spring washer size m10 co nforming to is: 3063 - 01 no, normal nut size m10- 01 no, and all items material confirming to is: 1367 (pa rt-14), a2-70 make: tvs/apl/unbrako/kundan. [ warranty period: 30 months after the date of delivery ] ] - procurement of stainless steel hexagonal head etc.
supply of set of brake head bolt and castle nut as per:- (1) brake head bolt as per clw drg no. 01/ 4/19/64 (alt-13) qty/set 1 no. (2) castle nut m 36 to is: 2232, p-8 qty/set-1 no. [ warranty period: 7 2 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] electric loco shed stores/kgp, - set of brake head bolt and castle nut as per:- (1) brake head bolt as per clw drg no. 01/4/19/64 (alt-13) qty/set 1 no. (2) castle nut m 36 to is: 2232, p-8 qty/set-1 no.
supply of elastic stop nut [(light hexagonal coarse thread) (unc-3b) as per dlw drg. no ske 1289 alt ration-a ; line no 20 to part no 15363168 [ warranty period: 30 months after the date of delivery ] ] - elastic stop nut [(light hexagonal coarse thread) (unc-3b) as per dlw drg. no ske 1289 etc.
LOADING...
LOADING...