Find the latest draft gears tenders in eastern railway for 2026 from government departments, corporations and state PSUs. Get tender details and bidding information.
FILTERS
supply of equalizer (boxnhl) for escorts design bmbs. drawing no : material and specification : as per operation and maintenance manual of escorts make bmbs for freight stock with casnub bogie; doc. no. red-rd-bs-019-om-01 ;rdsos spec no. wd-23-bmbs-2008 (rev. 1) amendment no.1 of sept 2016. [ warranty period: 36 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] divisional gsd tata, ser
View Insights
corrigendum : supply of supply, installation and commissioning of computerized woodward governor test stand incl uding concomitant accessories as per annexure 1. [ warranty period: 24 months after the date of deliver y ] ]
supply of manufacture and supply of heat treated welded crossing for section of wing rail and point ra il mg(1000 mm) for 52 kg on psc sleepers 1 in 8.5 to rdso drg. no. t-6329, complete with all fittings as li sted in the drawing excluding grooved rubber sole plates, check rails, insulating liners, elastic rail clips and conforming to irs specification no. irs:t-10-2025. [ warranty period: 30 months after the date of de livery ] ]
supply of set of roof hatch retainer assembly for wag9/wap7 loco consisting of 04 items (each 0 2 nos. per set) as follows:- (i) roof hatch retainer assembly intermediate to clws drg. no.- 1209.10.2 37.051 (alt.-1), (ii) retaining bolt to clws drg. no.- 1209.10.437.055 (alt.-1), (iii) roof hatch retainer assembly (end) to clws drg. no.- 1209.10.337.077, (iv) retainer bolt to clws drg. no.- 1209.10.337. 054 (alt.-2). [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] electic loco shed stores/bksc,
supply of brake cylinder holding chain for sona blw precision forging ltd. drawing no.4eb10266 or similar. material and specification as per operation and maintenance ma nual of sona blw make bmbs for freight stock with casnub bogie doc no. red-rd-bs-019- om-01 and rdso's specn, no. wd-23-bmbs-2008(rev-1) with amendment no. 1 of sept. 2016. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
supply of set of kit of spare for knorr bremse make ep unit with part no. ii 90590 as pe r annexure attached (one set consisting of 68 items =101 nos.) [ warranty period: 30 mont hs after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] ws electric loco stores/kgp,
supply of supply,installation and commissioning of digital coil spring scragging and load deflection testin g machine including concomitant accessories, capacity- 25tones. [ warranty period: 30 months after the da te of delivery ] ]
supply of supply, installation and commissioning of hydraulic re- railing equipment for art as pe r attached specification. [ warranty period: 30 months after the date of delivery ] ]
supply of pawl for bogie mounted brake cylinder for emu and memu. as per rdso assly.drg. no.s k81200 alt.5, item 59 and part drg.no.sk81206 alt. 3, item 8. spec, rdso ck-013 (rev.01) [ warrant y period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
supply of barrel spring for slack adjuster, type: irsa-600. drawing no. :rdsos drg. no. wd-8206 4-s-04-rc, alt. 6, item no. 4. material and specification :as per drawing and conforming to rdsos spec . no .07-abr- 1992, amend. no. 5 of sept. 2016. warranty /guarantee:36 months from the date of sup ply or 24 months after putting into service whichever is earlier. [ warranty period: 36 months after th e date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] roh stores/bksc, ser
supply of manufacturing & supply of metal liner for sharp curve confirming to rdso drawing no. t-8995 (alt. nil) for use with psc wider sleeper confirming to rdso drg. no. t - (8979-8982) suitable t o 60 kg(uic)/60e1 rails with irs specification t-56-2025 (1st rev.) [ warranty period: 30 months aft er the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] [ rate of supply 13000 units per month , commencement time allowed -1 day ] anywhere in er as per tender 130000.00 numbers
supply of 1 in 8.5 tws turnout for 22.9t axle load : 1 in 8.5 weldable cast manganese stee l crossing b.g. (1673 mm) for 60e1 rail with r260 grade on psc sleepers excluding erc, liner, ncrgrsp, check rail & check rail fittings. (drawing and item details as mentioned in s et documents are applicable) drg: (rdso) rdso/t-9776, alt.03 spec: (rdso) irs/t-10-2025, (rdso ) irs:t-29 (revised -2024) set doc: set documents for rt-9776 [ warranty period: 30 months after the date of delivery ] ] new general stores depot/kgp,
supply of kit for bsp nipples (both end threaded). drawing no. : see 'details' below. matl. and spe cn. : as per drawing. (1) description :half inch bsp nipple both end threaded, drawing no . s.e. rly's s ketch no.0694/kgp, item no. 1, qty: no./ kit : 5. (2) description : one inch bsp nipple both end thread ed, drawing no. s.e. rly's sketch no. 0694/kgp, item no. 3, qty: no./ kit: 2. (3) description : one and half inch bsp nipple both end threaded, drawing no. s.e. rly's sketch no. 0694/kgp, item no. 5,qty: no./ kit: 2. (4) description :three by four inch bsp nipple both end threaded, drawing no. s.e. rly's sk etch no. 0694/kgp, item no. 8, qty: no./ kit: 1. [ warranty period: 30 months after the date of deliv ery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] workshop carriage stores/kgp,
supply of centering disc (secondary lower) drawing no. : rcf's drawing no. 1268599, alt.- 01r. matl.& specn : mdts-166, rev.-02. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] workshop carriage stores/kgp,
supply of bmbs brake cylinder 11" double acting slack adjuster without hand brake cable (sona blw precision forging limited make) sona blw drg. no.3eb7347, alt.10 conforming to rdso spec. n o.wd-23-bmbs-2008 (rev .1) with amend. no. 1 of sept '2016. [ warranty period: 36 months after t he date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
supply of kit for main valve of c-3 w distributor valve consisting of 13 items. ( 1.) dia phragm holder item no. 3 wabco pt. no. 19004200 scl pt. no. 501307000 - 01 no. (2).'o' ring 95.56 x 88.5 x 3.52 item no. 4 wabco pt. no. 70513278 scl pt. no. 501701000 - 01 no. (3). 'o' ri ng 136.83x129.77x3.53 item no.5 wabco pt. no. 70513478 scl pt. no. 501702000 - 01 no. (4). d iaphragm item no.6 wabco pt. no. 19185800 scl pt. no. 501703000 - 01 no. (5). spring item n o. 7 wabco pt. no. 19187000 scl pt. no. 501803000 - 01 no. (6). 'o' ring 15.98 x 12.42x1.78, ite m no. 9, wabco pt. no. 70501278 scl pt. no. 501704000 - 02 nos. (7). lip seal item no. 24 wabc o pt. no. 70581800 scl pt. no. 501706000 - 02 nos. (8). diaphragm item no. 27 wabco pt. no. 1 9184900 scl pt. no. 501707000 - 01 no. (9). 'o' ring item no. 29 12.81x9.25x1.78 wabco pt. no. 70501178 scl pt. no. 501708000 - 01 no. (10) 'o' ring item no. 32 15x10x2.5 wabco pt. no. 705 23900 scl pt. no. 501709000 - 05 nos. (11). 'o' ring 19.19x15.6 x 1.78 item no. 36 wabco pt. no . 70524914 scl pt. no. 501711000 -01 no. (12). valve item no. 37 wabco pt. no. 19022000 scl p t. no. 501406000 - 01 no. (13) spring item no. 39 wabco pt. no. 18993100 scl pt. no. 5018130 00 - 01 no firm's offer- kit for main valve (13-items) to ftrtil part number 790501492. [ warran ty period: 30 months after the date of delivery ] ] amm/electric loco shed gkp,
supply of kit for manifold mounting cock as per ftrtipl part number 790006151 consists of 0 3 items.1.o- ring as per ftrtipl part number 013701000a, qty.01 no.(2) o-ring as per ftrtipl part number 006720000a, qty.02 no. (3) kit for isolating cock as per ftrtipl part number 790003101, qt y.01 no.consists of (i)rubber ball seat as per ftrtipl part number 003701000a, qty.02 no.(ii) o-ring as per ftrtipl part number 003705000a, qty 01 no.(iii) o-ring as per ftrtipl part number 0017105 00a, qty.1 no. (iv) valve insert as per ftrtipl part no. 003603000, qty.1 no. [ warranty period: 30 months after the date of delivery ] ] electric/diesel loco shed/izn,
supply of set of liners for centre pivot of bogie comprising of- (1) liner horizontal t o clw's drg. no.- 03/4/12/1 (alt.-4)- 2 nos. (2) liners vertical to clw's drg. no.- 03/4/12/2 (al t. 4)- 4 nos. for wap4 locos. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] electric loco shed stores/src,
supply of modification and piping arrangement for memu trailer coaches, as per drawing no. 3290 5037, detail mentioned in annexure-a, make/brand: - smw or similar. ]
supply of adjusting piece, size phy30 x 6.5 for brake head & block arrgt.(modified) to icf drg. no. t-3-1-619 alt- e/2, item- 9. matl. & specn. is:2062/2011 with amndt. no. 1 of nov'2012 gr. e250a [ w arranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] general stores depot
LOADING...
