Find the latest washers tenders in eastern railway for 2026 from government departments, corporations and state PSUs. Get tender details and bidding information.
FILTERS
supply of machined washer a10.5 to is 2016-1967, 140hv-a2. [ warranty period: 30 months after th e date of delivery ] ]
View Insights
supply of disc lock washer to following specn.(i)size: m 16 (ii) material : aisi 1010, case hardene d to 40 / 55 on the rockwell c scale to a depth of 0.13 mm (alternate material , alloy steel grade 51 c rv4 may be used) (iii) zinc plated to astm 13-633-85 or coated .with delta protekt (iv) to be supplied in pair with each mating half glued together by non -permanent glue.(v) suitable for matching with p 10.9 bolt (vi) cams on mating surface [ warranty period: 30 months after the date of delivery ] ] sr. se/c&w/shorting
supply of knuckle pivot pin with washer & conform ing to rdso str no. wd-70-bd-10 (rev.2) to rdso drg. no.sk-62724, (item no. 4) alt 28. for providing in electric locomotives. [ warranty perio d: 30 months after the date of delivery ] ] amm/electric loco shed gkp,
supply of interlock washer (suitable for m12-hex head bolt)make/type - disc-lock/nor d-lock / durlok/gallock to specn. icf/md/specn.331,issue status 01,rev.01 & drg no.le24100 ,note#8. special condition : i) interlock washers shall be coated/plated with enviornment f riendly coating. ii) interlock washers shall be procured as pairs glued together to fas ten as such. [ warranty period: 30 months after the date of delivery ] ]
supply of set of stainless-steel hex. head bolt m10x45 mm (a2-70 to is 1367 : part 14 : sec 1 : 2 023) with m10 nyloc nut (a2-70 to is 1367 : part 14 : sec 2 : 2023 ) and machined washer m10 (a2-70 to is : 2016 - 1967, reaffirmed 2001). matl.& specn : as per description. [ warranty period: 30 mont hs after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] workshop carriage stores/kgp,
supply of bottom liner of hytrel lower washer for primary suspension to drawing/ specification no. rd so's drg. no. cg-k4059, alt. 4, item no.- 3. material specification as per drawing. [ warranty period: 30 months after the date of delivery ] ]
supply of auxiliary reservoir suspension strap along with m16 stud with nut and was her to rdso's drg no-wd-80007-s-12a, item no-1, alt. no-20 [ warranty period: 30 months aft er the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] - procurement of auxiliary reservoir suspension strap along with m16 stud with nut and washer to rdso's drg no-wd-80007-s-12a, item no-1, alt. no-20.
supply of nylon packing washer, o.d.: 18.5 mm, i.d.: 10 mm, thickness: 5 mm. drawing no. : ------- - material and specification: nylon 66 to rdso's str no. wd-04-nylon bushes-2002. [ warranty perio d: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] workshop carriage stores/kgp, - nylon packing washer, o.d.: 18.5 mm, i.d.: 10 mm, thickness: 5 mm. drawing no. : -------- material and specification: nylon 66 to rdso's str no. wd-04-nylon bushes-2002.
supply of led acid battery connuction nut malt size - hex head zinc coted m8x1.25 pitch x 30m m long with nut, one spring 02 plane washer. [ warranty period: 30 months after the date of deliver y ] ] - led acid battery
supply of g i bolt size - 100x 8 mm& wing nut with 2 nos. g.i washer, o/d- 20 mm, i/d-8 mm, thickness-2 mm. [ warranty period: 30 months after the date of delivery ] ] - g i bolt, wing nut & gi washer.
supply of repair kit for smgr reducing valve type r02 consting of (1) "o" ring- 2371-38 qty-1 no. (2) washer-3444-01 qty-1 no. (3) v.seal 2866- 01 qty-2 nos (4) seal-2811-2 qty. 2 n os (5) valve assembly [ warranty period: 30 months after the date of delivery ] ] electric/diesel loco shed/izn, - repair kit for smgr reducing valve
supply of supply (reducer 1.5 to 1 inch, material gi, hose threaded connector (length 90 mm), mat erial gi, suitable u clamp, suitable bracket as approved (thickness 4 mm minimum), fasteners, washer , material ss. full assembly shall be printed with fluorescent paint orange/red) and fitment of wat er filling connectors in lhb coaches with overhead water tank. [ warranty period: 30 months after the date of delivery ] ] - reducer.
supply of yearly kit for intake suction filter (vv120-t) kbi kit no.xki/kit/136 consisting of 04 item. 1) filter leelment - pt no. 8.000.8.923.716.5, qty - 01 no. 2)washer -pt.no.- 8.000.0.340.716.5, qty-02 nos., 3) washer - pt.no.- 8.000.0.340.717.5, qty-01 nos. 4)hexagon nut-pt.no.- 8.000.8.360.704.4, qty-01 no. [ wa rranty period: 30 months after the date of delivery ] ] - yearly kit for intake suction filter (vv120-t) kbi kit no.xki/kit/136 consisting of 04 item. 1) filter leelment - pt no. 8.000.8.923.716.5, qty - 01 no. 2)washer -pt.no.- 8.000.0.340.716.5, qty-02 nos., 3)washer - pt.no.- 8.000.0.340.717.5, qty-01 nos. 4)hexagon nut-pt.no.- 8.000.8.360.704.4, qty-01 no.
supply of bimetal washer for middle articulation assly pt.no. 14.11 m/s. sil ord ref. s 0220131503 or m/s. gsec pt. no. gsec/panto/070 or m/s. contransys pt. no. c01240 or equivalent part no. from other clw%a0 approved sources for pantograph type am-12. e ach unit should be embossed/engraved with makers name, month year and batch no. of manufacturering at conspicuous place. [ warranty period: 30 months after the date of delive ry ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] electric loco shed stores/kgp, - bimetal washer for middle articulation assly etc.
supply of pin no. 7 as per drg. no. contr-9405-s/9, alt-8 or latest. with suitable washer and bulb cotte r, and for bulb cotter drg. no. wd-94068-s-1, alt-4 or latest. [ warranty period: 30 months after the date of delivery ] ] - pin no. 1-8 as per drg attached
supply of copper washer od=14.2 mm, id=5.8 mm thickness=0.2 mm. [ warranty period: 30 m onths after the date of delivery ] ] - copper washer od=14.2 mm, id=5.8 mm thickness=0.2 mm.
supply of overhauling kit for knorr bremse make horn operating valve as per kbipl part no.-117 6212, set consists of 11 items (18 nos.) as given below-- (1) fulcrum, part no.- c 152224= 01 no./set. (2) bellow, part no.- c 152228= 01 no./set. (3) tension spring, part no.- c 152231= 01 no./set. (4) lo cking ring, part no.- 468204= 02 nos./set. (5) lock washer, part no.- 465326= 02 nos./set. (6) compr ession spring, part no.- a304485/7= 02 nos./set. (7) o ring, part no.- a43321= 02 nos./set. (8) o rin g, part no.- k4149= 02 nos./set. (9) washer, part no.- 450657= 02 nos./set. (10) o ring, part no.-k41 40= 02 nos./set. (11) ball knob red, part no.- c 159881= 01 no./set. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] electric loco shed - overhauling kit, set consists of 11 items (18 nos).
supply of adjustment washer for axle tube to hitachi drg. no. 10q-745-382 alt. d. [ warran ty period: 30 months after the date of delivery ] ] - adjustment washer for axle tube to hitachi
supply of set of spare parts of vertical support assembly for cbc. one set consists o f special allen bolt escorts part no. sk-1535, with castle nut m 16 x 2 (is:2232), split pin m 5 x 40 (is:549), washer (top) escorts part no. sk 1536, washer bottom escorts part no. sk 1537, and conical washer escorts part no. sk 729. to rdso spec no. rdso/2011/cg-03, ( rev-01). [ warranty period: 30 months after the date of delivery ] ] general stores depot - set of spare parts of vertical support assembly for cbc. one set consists of special allen bolt escorts part no. sk-1535, with castle nut m 16 x 2 (is:2232), split pin m 5 x 40 (is:549), washer (top) escorts part no. sk 1536, washer bottom escorts part no. sk 1537, and conical washer escorts part no. sk 729. to rdso spec no. rdso/2011/cg-03, (rev-01).
supply of teflon sheet (size:- od= 38 mm, id= 08 mm, thickness= 4.5 mm) with one flat washe r (size:- od= 20 mm, id= 07 mm, thickness= 1.5 mm) & round head screw (size:- m6 x 25 mm as p er is: 1364) for 1 1/4" none return valve. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] electric loco in stores/bksc, - teflon sheet with one flat washer & round head screw
LOADING...
