Latest Chlorine Dosing Machines Tenders in Military Engineer Services
Find the latest chlorine dosing machines tenders in military engineer services for 2026 from government departments, corporations and state PSUs. Get tender details and bidding information.
FILTERS
Category: Chlorine Dosing Machines
Organization: Military Engineer Services
2 Live Chlorine Dosing Machines Tenders in Military Engineer Services 2026
T247 ID-103713909 |Bid Value:₹ 31.15 Lakh |EMD:₹ 62.30 K |21-09-2026 2 Days Left
dismantling taking down centrifugal pump set from platform and disconnecting suction delivery pipe line electrical connections transport the same to workshop for repairie machine work welding grinding turning polishing lathe work filler work etc complete as required on site and after repairing transporting the pump set from workshop to site installation at site connecting suction delivery pipe and electrical connection complete all as directed by engineer-in-charge for 120 hp capacity pumps note- i the quoted rate shall deemed to be inclusive of the cost of providing foundation nuts bolts washers gland packing greasing oiling and oil sheet gasket ii the spare parts shall be measured and paid separately under relevent items of this boq no extra payment will be made to the contractor for any additional requirement for fixing reinstalling the pump motor set iii gland packing greasing and oiling shall be changed at the time of repairs, all as per item no 1 above but 100 hp, all as per item no 1 above but 75 hp, all as per item no 1 above but 5040 hp, all as per item no 1 above but 30 20 hp, all as per item no 1 above but 12515hp, all as per item no 1 above but 1075 hp, all as per item no 1 above but 5 3 25 hp, material and labour for disconnecting the motor by delinking the centrifugal pump set transporting to workshop opening the motor removing the unserviceableburnt windings from the motor stator cleaning the stator slots with petrol rewinding with existing size of copper winding wire insulating to the existing class of insulation varnishing ovening etc testing at factory under no load assembling transporting to site fixing on foundation re-assembling the motor and testing at load to the satisfaction of engineer-in-charge for motor capacity 100120 hp - note -i transportation and necessary tp for shifting the motor to workshop back is included in the quoted rates ii major spares like coupling bearings etc will be measured and paid under respective item of schedule a, all as per item no 9 above but 5075 hp, all as per item no 9 above but 203040 hp, all as per item no 9 above but 151251075 hp, all as per item no 9 above but 2535 hp, supply only ci impeller suitable of 120 hp capacity centrifugal pump sets, supply only casing ring suitable of 120 hp capacity centrifugal pump sets, supply only impeller ring brass nut suitable of 120 hp capacity centrifugal pump sets, supply only impeller key suitable of 120 hp capacity centrifugal pump sets, supply only coupling key suitable of 120 hp capacity centrifugal pump sets, supply only coupling rubber bushes tyre coupling suitable of 120 hp capacity centrifugal pump sets, supply only shaft sleeve steel suitable of 120 hp capacity centrifugal pump sets, supply only bearing suitable of 120 hp capacity centrifugal pump sets, supply only brass bush suitable of 120 hp capacity centrifugal pump sets, supply only shaft suitable of 120 hp capacity centrifugal pump sets, supply only ms coupling beam jaw gear any type for both pump and motor suitable of 120 hp capacity centrifugal pump sets, supply only gland cap ci suitable of 120 hp capacity centrifugal pump sets, supply only gland bolt and nut suitable of 120 hp capacity centrifugal pump sets, supply only ci impeller suitable of 100 hp capacity centrifugal pump sets, supply only casing ring suitable of 100 hp capacity centrifugal pump sets, supply only impeller ring brass nut suitable of 100 hp capacity centrifugal pump sets, supply only impeller key suitable of 100 hp capacity centrifugal pump sets, supply only coupling key suitable of 100 hp capacity centrifugal pump sets, supply only coupling rubber bushes tyre coupling suitable of 100 hp capacity centrifugal pump sets, supply only shaft sleeve steel suitable of 100 hp capacity centrifugal pump sets, supply only bearing suitable of 100 hp capacity centrifugal pump sets, supply only brass bush suitable of 100 hp capacity centrifugal pump sets, supply only shaft suitable of 100 hp capacity centrifugal pump sets, supply only ms coupling beam jaw gear any type for both pump and motor suitable of 100 hp capacity centrifugal pump sets, supply only gland cap ci suitable of 100 hp capacity centrifugal pump sets, supply only gland bolt and nut suitable of 100 hp capacity centrifugal pump sets, supply only ci impeller suitable of 7550 hp capacity centrifugal pump sets, supply only casing ring suitable of 7550 hp capacity centrifugal pump sets, supply only impeller ring brass nut suitable of 7550 hp capacity centrifugal pump sets, supply only impeller key suitable of 7550 hp capacity centrifugal pump sets, supply only coupling key suitable of 7550 hp capacity centrifugal pump sets, supply only coupling rubber bushes tyre coupling suitable of 7550 hp capacity centrifugal pump sets, supply only shaft sleeve steel suitable of 7550hp capacity centrifugal pump sets, supply only bearing suitable of 7550hp capacity centrifugal pump sets, supply only brass bush suitable of 7550 hp capacity centrifugal pump sets, supply only shaft suitable of 7550 hp capacity centrifugal pump sets, supply only ms coupling beam jaw gear any type for both pump and motor suitable of 7550hp capacity centrifugal pump sets, supply only gland cap ci suitable of 7550 hp capacity centrifugal pump sets, supply only gland bolt and nut suitable of 7550 hp capacity centrifugal pump sets, supply only ci impeller suitable of 3040 hp capacity centrifugal pump sets, supply only casing ring suitable of 3040 hp capacity centrifugal pump sets, supply only impeller ring brass nut suitable of 3040 hp capacity centrifugal pump sets, supply only impeller key suitable of 3040 hp capacity centrifugal pump sets, supply only coupling key suitable of 3040 hp capacity centrifugal pump sets, supply only coupling rubber bushes tyre coupling suitable of 3040 hp capacity centrifugal pump sets, supply only shaft sleeve steel suitable of 3040hp capacity centrifugal pump sets, supply only bearing suitable of 3040hp capacity centrifugal pump sets, supply only brass bush suitable of 3040 hp capacity centrifugal pump sets, supply only shaft suitable of 3040 hp capacity centrifugal pump sets, supply only ms coupling beam jaw gear any type for both pump and motor suitable of 30400hp capacity centrifugal pump sets, supply only gland cap ci suitable of 3040 hp capacity centrifugal pump sets, supply only gland bolt and nut suitable of 3040 hp capacity centrifugal pump sets, supply only ci impeller suitable of 2015125 hp capacity centrifugal pump sets, supply only casing ring suitable of 2015125 hp capacity centrifugal pump sets, supply only impeller ring brass nut suitable of 2015125 hp capacity centrifugal pump sets, supply only impeller key suitable of 2015125 hp capacity centrifugal pump sets, supply only coupling key suitable of 2015125 hp capacity centrifugal pump sets, supply only coupling rubber bushes tyre coupling suitable of 2015125 hp capacity centrifugal pump sets, supply only shaft sleeve steel suitable of 2015125 hp capacity centrifugal pump sets, supply only bearing suitable of 2015125 hp capacity centrifugal pump sets, supply only brass bush suitable of 2015125 hp capacity centrifugal pump sets, supply only shaft suitable of 2015125 hp capacity centrifugal pump sets, supply only ms coupling beam jaw gear any type for both pump and motor suitable of 2015125 hp capacity centrifugal pump sets, supply only gland cap ci suitable of 2015125 hp capacity centrifugal pump sets, supply only gland bolt and nut suitable of 2015125 hp capacity centrifugal pump sets, supply only ci impeller suitable of 755325 hp capacity centrifugal pump sets, supply only casing ring suitable of 755325 hp capacity centrifugal pump sets, supply only impeller ring brass nut suitable of 755325 hp capacity centrifugal pump sets, supply only impeller key suitable of 755325 hp capacity centrifugal pump sets, supply only coupling key suitable of 755325 hp capacity centrifugal pump sets, supply only coupling rubber bushes tyre coupling suitable of 755325hp capacity centrifugal pump sets, supply only shaft sleeve steel suitable of 755325 hp capacity centrifugal pump sets, supply only bearing suitable of 755325 hp capacity centrifugal pump sets, supply only brass bush suitable of 755325 hp capacity centrifugal pump sets, supply only shaft suitable of 755325 hp capacity centrifugal pump sets, supply only ms coupling beam jaw gear any type for both pump and motor suitable of 755325 hp capacity centrifugal pump sets, supply only gland cap ci suitable of 755325 hp capacity centrifugal pump sets, supply only gland bolt and nut suitable of 755325 hp capacity centrifugal pump sets, supply and fix in repairs motor cooling fan of same size as existing suitable for motor of 120100 hp capacity centrifugal pump sets including all fiiting fixtures etc as directed by engr-in-charge, supply and fix in repairs motor cooling fan of same size as existing suitable for motor of 755040 hp capacity centrifugal pump sets including all fiiting fixtures etc as directed by engr-in-charge, supply and fix in repairs motor cooling fan of same size as existing suitable for motor of 302520 hp capacity centrifugal pump sets including all fiiting fixtures etc as directed by engr-in-charge, supply and fix in repairs motor cooling fan of same size as existing suitable for motor of 1512510 hp capacity centrifugal pump sets including all fiiting fixtures etc as directed by engr-in-charge, supply and fix in repairs motor cooling fan of same size as existing suitable for motor of 755 hp capacity centrifugal pump sets including all fiiting fixtures etc as directed by engr-in-charge, supply and fix in repairs motor cooling fan of same size as existing suitable for motor of 32 hp capacity centrifugal pump sets including all fiiting fixtures etc as directed by engr-in-charge, supply and fix in repairs front rear ends bearing of same size as existing suitable for motor of 120100 hp capacity centrifugal pump sets including all fiiting fixtures etc incl taking out motor if not in repair as directed by engr-in-charge, supply and fix in repairs front rear ends bearing of same size as existing suitable for motor of 755040 hp capacity centrifugal pump sets including all fiiting fixtures etc incl taking out motor if not in repair as directed by engr-in-charge, supply and fix in repairs front rear ends bearing of same size as existing suitable for motor of 302520 hp capacity centrifugal pump sets including all fiiting fixtures etc incl taking out motor if not in repair as directed by engr-in-charge, supply and fix in repairs front rear ends bearing of same size as existing suitable for motor of 1512510 hp capacity centrifugal pump sets including all fiiting fixtures etc incl taking out motor if not in repair as directed by engr-in-charge, supply and fix in repairs front rear ends bearing of same size as existing suitable for motor of 755 hp capacity centrifugal pump sets including all fiiting fixtures etc incl taking out motor if not in repair as directed by engr-in-charge, supply and fix in repairs front rear ends bearing of same size as existing suitable for motor of 32 hp capacity centrifugal pump sets including all fiiting fixtures etc incl taking out motor if not in repair as directed by engr-in-charge, supply laying and fixing or passing through pipes ducts or laid under floor of through walls etc jointing and testing lt xlpe insulated pvc sheathed electric cable 1100 volt grade heavy duty isi marked with copper conductor and over all served with an outer sheath of pvc from panel to motor including providing copper lugs as per site requirement including taking down old cable complete size of cable 70 sqmm single core as specified and directed by engineer-in-charge note- cost of dwc pipe of suitable size for laying of xlpe copper cable from panel to motor for sizes up to 70 sqmm shall deemed to be included in the quoted rate, all as per item 104 above but size of cable 35 sqmm single core, all as per item 104 above but size of cable 25 sqmm single core, all as per item 104 above but size of cable 16 sqmm single core, taking out the submersible pump set of 10755 hp capacity from deep bore well with connected cable and column pipes of 3m length with flange end 32 dia appx 10 nos per bore well and disconnecting the cable for removing the submersible pump set for carrying out necessary repairs all as directed by engineer-in-charge, lowering of submersible pump set 10755 hp in bore well with connected cable column pipes re-assembling column pipe of 3m long with flange ends 32 dia appx 10 nos and testing and commissioning of pump set after repairs including rectification of any leakage to the entire satisfaction of engineer-in-charge, repairs to submersible pumping set 10755 hp by dismantling pumps and motor carrying out required repairs to pump by machines ie grindingpolishing reassembling after renewal of all worn out spare parts cleaning and refixing with motors with required coupling etc complete testing all as specified directed by engineer-in-charge note - i rewinding of motor renewal of parts will be measued paid separately ii rate of taking down of old unserviceable spare parts shall be included in quoted rate of this item, rewinding of ac 3 phase induction motor of 10 hp capacity submersible pump motor by cutting of burnt out winding cleaning of starter slots cleaning bleaching of motor and rewinding with appropriate gauge of pvc insulated copper winding wire complete including all required parts complete all as specified directed by engineer-in-charge, rewinding of ac 3 phase induction motor of 755 hp capacity submersible pump motor by cutting of burnt out winding cleaning of starter slots cleaning bleaching of motor and rewinding with appropriate gauge of pvc insulated copper winding wire complete including all required parts complete all as specified directed by engineer-in-charge, taking out the submersible pump set of 50 hp capacity from rainwater sump at cair with connected cable and column pipes of 3m length with flange end 32 dia and disconnecting the cable for removing the submersible pump set for carrying out necessary repairs all as directed by engineer-in-charge, repairs to submersible pumping set 50 hp by dismantling pumps and motor carrying out required repairs to pump by machines ie grindingpolishing reassembling after renewal of all worn out spare parts cleaning and refixing with motors with required coupling etc complete testing all as specified directed by engineer-in-charge note - i rewinding of motor will be measued paid separately ii rate of renewalrepairs of unserviceable parts of motor and pump set are deemed to be included in the quoted rate and incl taking down of old unserviceable spare parts shall be included in quoted rate, rewinding of ac 3 phase induction motor of 50 hp capacity submersible pump motor by cutting of burnt out winding cleaning of starter slots cleaning bleaching of motor and rewinding with appropriate gauge of pvc insulated copper winding wire complete including all required parts complete all as specified directed by engineer-in-charge, supply only for fixing thrust bearing plate for motor of submersible pump set suitable for 10755 hp motor, supply only for fixing assembly for coupling sleeve for motor of submersible pump set suitable for 10755 hp motor, supply only for fixing winding protector set for motor of submersible pump set suitable for 10755 hp motor, supply only for fixing motor bearing bush for motor of submersible pump set suitable for 10755 hp motor, supply only for fixing drain plug for motor of submersible pump set suitable for 10755 hp motor, supply only for fixing sand guard for motor of submersible pump set suitable for 10755 hp motor, supply only for fixing key for thrust plate for motor of submersible pump set suitable for 10755 hp motor, supply only for fixing impeller of submersible pump set suitable for 10755 hp pump, supply only for fixing stage bowl of submersible pump set suitable for 10755 hp pump, supply only for fixing bowl fixing steel bolt and nut with washer of submersible pump set suitable for 10755 hp pump, supply only for fixing bearing sleeve of submersible pump set suitable for 10755 hp pump, supply only for fixing shaft nut with washers of submersible pump set suitable for 10755 hp pump, supply only for fixing suitable bearing bush of submersible pump set suitable for 10755 hp pump, supply only for fixing suitable neck ring of submersible pump set suitable for 10755 hp pump, supply only for fixing casing wear ring of submersible pump set suitable for 10755 hp pump, supply only for fixing suitable strainer of submersible pump set suitable for 10755 hp pump, supply only for fixing suitable shaft seal of submersible pump set suitable for 10755 hp pump, supply only for fixing stage gasket of submersible pump set suitable for 10755 hp pump, m l for lifting the submersible non clog type pumpset of 151075 hp capacity from sewage well disconnecting the cable transporting the pumpset to workshop dismantling the motor megger testing the motor removing the burnt damaged winding rewinding with appropriate size of copper winding wires re-insulation with appropriate class of insulation to the existing class varnishing and bakeing replacing the wornout bearing bushing assembling testing of motor opening the pump set cleaning the impellers supplying and fixing required nos of bearing bush after removing existing worn out bush bearing of pump set upto 08 stages assembling the pump re-assembling the motor pump shifting to site connecting the cable and lowering the pump set along with gi pipes cables including testing complete all as directed note major spares like impeller etc will be measured paid separately, s f in repair contactor 3 phase ac 440 volt of 25 amps capacity complete all as specified directed by engineer-in-charge, s f in repair contactor 3 phase ac 440 volt of 32 amps capacity complete all as specified directed by engineer-in-charge, s f in repair contactor 3 phase ac 440 volt of 40 amps capacity complete all as specified directed by engineer-in-charge, s f in repair contactor 3 phase ac 440 volt of 70 amps capacity complete all as specified directed by engineer-in-charge, s f in repair contactor 3 phase ac 440 volt of 95 amps capacity complete all as specified directed by engineer-in-charge, s f in repair contactor 3 phase ac 440 volt of 115 amps capacity complete all as specified directed by engineer-in-charge, repairreplacement of following us itemsparts of lt panel board if required with necessary copper wiring lugs etc complete to make item functional all as specified and directed by engineer-in-charge- a digital voltmeter 0-500 v, all as per item 141 above but b digital ammeter 0-200 a, all as per item 141 above but c ammeter ct type 0-300 a, all as per item 141 above but d selector switch as per existing, all as per item 141 above but e phase indicator r y b as per existing, all as per item 141 above but f electronic relay of any required size, all as per item 141 above but g aluminium busbar as per existing, all as per item 141 above but h cable lugs as per existing, sf on load change over switch four pole 400a 415 volts ac manual changeover open execution type with handle including taking down old change over switch connection complete all as directed, m l for disconnecting the electrical connections from the panel to the sewage motor 30 hp dis-connecting the pump motor and shifting the same to the upper platform from the sewage well carefully using necessary t p and dismantling the rusted structural steel base plate from the foundation bed fabricating new base plate using structural steel sections of the same shape size of the existing base plate applying two coats of synthetic enamel black paint over a coat of red oxide fixing complete on the exisitng foundation bed using new foundation bolts as required at site lowering of the pump motor fixing on the base plate with proper shaft allignment and connecting with coupling connecting the electrical water connections checking for smooth running of the pump complete all as directed note - 1 steel sections and coupling shall be measured and paid seperatly under respective items of this schedule 2 the quoted rates are inclusive of necessary t p painting nuts bolts washers etc, repairs to sewage motor 30 hp by dismantling pumps and motor carrying out required repairs to pump by machines ie grindingpolishing reassembling after renewal of all worn out spare parts cleaning and refixing with motors with required coupling etc complete testing all as specified directed by engineer-in-charge note - i rewinding of motor renewal of parts shall be measued paid separately ii rate of taking down of old unserviceable spare parts shall be included in quoted rate of this item, taking out angle iron and m l for rolled mild steel in joists channel angle or tee sections as in main and cross beams of fe 410-w grade steel for ladders for ug sumps oh tanks including cutting welding grinding sharp corners etc all as directed note - the quoted rates are inclusive of unloading fabrication work at site reducing to required shape size hoisting fixing etc including prepration of new untreated surfaces and painting of with one coat of red oxide primer and two coats of black paint all as required at site including taking down the old unsv ones complete all as directed, dismantling of existing panel board of any type with all accessoires complete design supply installation testing and commissioning of factory-built indoor double door lt panel cubicle type floor mounted compartmentalised fabricated from crca sheet steel with minimum 20 mm thick doorsfront coversload-bearing members and 16 mm internal partitionsgland plates the enclosure shall be phosphated by seven-tank pretreatment and finished with epoxy polyester powder coating of minimum 80 microns shade ral 7035 suitable for indoor use enclosure shall be suitable for ac supply system 415 volts 3 phase 4 wire 50 hz degree of protection shall be ip-54 cable entry from bottom side in separate cable alley on both sides separated with bakelite sheet of suitable size including internal wiring with pvc insulated stranded copper wire 1100 volts grade panel shall conform to isiec 61439-1 61439-2 and be routinetype tested the panel shall consist of electrolytic grade tpn aluminium bus bars with rated at minimum 15 times the main incoming switchgear rating provided with colour coded heat shrinkable sleeves the panel shall be provided with separate compartments for each switchgear including instrumentation such as ammeters voltmeter phase indicating lamps etc with double-stud hinged door front rear openable with locking arrangement including interlocking with switchgears the panel shall be fixed on angle iron frame made of angles 50 x 50 x 6 mm embedded 200 mm below ground level in pcc 124 type b-1 using 20 mm grade stone aggregate 600 mm above ground level the panel is designed for 02 nos centrifugal pump motors of 100 hp 746 kw rating full load current 136 a each with electronic soft starters with integral bypass contactor and comprehensive motor protection comprising the following, dismantling of existing panel board of any type with all accessoires complete design supply installation testing and commissioning of factory-built indoor double door lt panel cubicle type floor mounted compartmentalised fabricated from crca sheet steel with minimum 20 mm thick doorsfront coversload-bearing members and 16 mm internal partitionsgland plates the enclosure shall be phosphated by seven-tank pretreatment and finished with epoxy polyester powder coating of minimum 80 microns shade ral 7035 suitable for indoor use degree of protection ip-54 enclosure shall be suitable for ac supply system 415 volts 3 phase 4 wire 50 hz cable entry from bottom side in separate cable alley on both sides separated with bakelite sheet of suitable size including internal wiring with pvc insulated stranded copper wire 1100 volts grade panel shall conform to isiec 61439-1 61439-2 and be routinetype tested the panel shall consist of electrolytic grade tpn aluminium bus bars with rated at minimum 15 times the main incoming switchgear rating provided with colour coded heat shrinkable sleeves the panel shall be provided with separate compartments for each switchgear including instrumentation such as ammeters voltmeter phase indicating lamps etc with double-stud hinged door front rear openable with locking arrangement including interlocking with switchgears the panel shall be fixed on angle iron frame made of angles 50 x 50 x 6 mm embedded 200 mm below ground level in pcc 124 type b-1 using 20 mm grade stone aggregate 600 mm above ground level the panel is designed for 02 nos centrifugal pump motors of 120 hp 895 kw rating full load current 163 a each with electronic soft starters with integral bypass contactor and comprehensive motor protection comprising the following, taking down of existing old and unservicebale flow meter of any design and type design supply installation testing and commissioning of electromagnetic flowmeter dn250 with remote external flow display ip65ip67 protection suitable for outdoor installation complete with instrumentation signal cabling suitable for continuous flow measurement on 250 mm dia potablerawtreated water pumping main with flow indication displayed remotely inside pump house the item comprises the following a programmable remote external digital flow display unit suitable for receiving 4-20 ma hart signal from the electromagnetic flow meter and displaying instantaneous flow rate cumulative flow cumhr cumday and mld inside pump house complete with minimum 4-digit ledlcd display programmable engineering units isolated analogue input configurable scaling totaliser function minimum 2 alarm relays accuracy better than 01 230 v ac auxiliary supply ip54 enclosure wallpanel mounting arrangement surge protection and all mounting hardware wiring terminals and accessories required for satisfactory operation 01 no make siemens sitrans rd100 cat no 7ml5741-1ab00-0ad0 schneider electric harmony indicator cat no xbtgt2220 autonics mt4w-dv-41 b i measuring principle faradays law of electromagnetic induction full bore bidirectional flow measurement virtually independent of pressure density temperature and viscosity of the medium ii nominal diameter dn250 10 suitable for 250 mm dia water pipeline iii measuring range device family 05 mh to 263 000 mh 25 galmin to 1665 mgald scaled to line size and application iv accuracy 05 of reading 1 mms 004 ins standard measurement error v max process pressure rating pn40 class 300 20k, ml for design fabrication supply transportation erection testing and commissioning of premium outdoor weatherproof illuminated main entrance sign board comprising 3 mm thick exterior grade pvdf coated fire-retardant acp fascia panel aludecor viva eurobond alstone or equivalent with cncrouter cut openings for letters logos and insignia edge folding and finishing complete fabricated ms internal structural framework of 40402 mm min shs complete with cutting welding grinding one coat zinc chromate primer and two coats synthetic enamel paint finish designed to withstand wind and dead loads 3d raised illuminated acrylic letters numerals bilingual text insignia and logo made from 8 mm thick imported cast acrylic face sun acryl jindal equivalent approved lasercnc cut uv resistant with 3 mm acrylicaluminium returns 50100 mm depth as approved and 5 mm pvcacrylic backing letters fixed with concealed ss stud fixing system complete with high brightness ip65ip66 waterproof led modules samsung philips osram operating on 12v dc through weatherproof constant voltage smps driver meanwell philips inventronics hilux with surge overload and short circuit protection minimum 50 000 hr led life cool white 6500k or as approved including complete internal frls copper wiring ferrules connectors ip65 junction boxes and accessories providing and fixing ss-304 grade decorative outer boundary frameborder fabricated from minimum 12 mm thick ss sheetbox section jindal tata ss or equivalent mirror or hairline satin finish seamlessly welded polished and decoratively buffed at corners providing and fixing ss-304 grade support polesmounting structure of minimum 150 mm dia with coating of red oxide and two coats of black paint with 10 mm thick ss base platesheight may vary from 2m to 6m ss-304 anchor bolts chemical anchoring clamps gussets and bracing capable of withstanding wind load up to 180 kmph and full dead load of sign board including frls 15 sqmm copper wiring in uv resistant pvcflexible conduit 6a sp mcb isolator weatherproof silicone sealing scaffolding hoisting welding drilling alignment testing commissioning cleaning and handing over, m l for laying connecting testing three core 6 sqmm copper conductor flexible pvc insulated pvc sheathed heavy duty flat cable 1100 volts grade for centrifugalsewage non clog pumps from panel to motor duly clamped on walls run through conduits etc including taking out unserviceable cable all as speciifed and as directed, material and labour for scraping the peeled off paint of pumping set up to 120 hp capacity along with base foundation plate applying metal paste on uneven surfaces to make the surface smooth and applying a coat of synthetic enamel paint of existing shade and writing the mes sm number on the motor pump set all as directed, material and labour for scraping the peeled off paint of suction delivery water lines ms duct covers control valves at pumping installations upto 6 mtr from pump outlet and 3 mtr from pump outlet applying metal paste on uneven surfaces as necessary to make the surface smooth and applying a coat of synthetic enamel paint of existing shade and sign writing all as directed, supply fix in repairs mccb 400 amps 35 ka 4 pole adj thermal and adj magnetic release trip unit 415 volt ac 50 hz ics-100icu including connecting up incoming out going cables with suitable lugs and testing complete all as specfied and as directed, supply fix in repairs mccb 250 amps 25 ka 4 pole adj thermal and adj magnetic release trip unit 415 volt ac 50 hz ics-100icu including connecting up incoming out going cables with suitable lugs and testing complete all as specfied and as directed, supply fix in repairs mccb 200 amps 25 ka 4 pole adj thermal and adj magnetic release trip unit 415 volt ac 50 hz ics-100icu including connecting up incoming out going cables with suitable lugs and testing complete all as specfied and as directed, supply fix in repairs mccb 100 amps 25 ka 4 pole adj thermal and adj magnetic release trip unit 415 volt ac 50 hz ics-100icu including connecting up incoming out going cables with suitable lugs and testing complete all as specfied and as directed, supply and fix in repairs mccb 4 pole 415 volts 125 amps 25 ka 50 hz ac adj thermal and adj magnetic release trip unit ics-100icu including connecting up incoming out going cables with suitable lugs and testing complete all as specified and as directed, earthing complete with galvanised steel earth plate electrode 60cm x 60cmx 60mm thick burried directly in ground vertically earth pit not less than 225m deep below ground level with top edge of the earth plate not less than 15m deep below normal ground level connected to galvanised iron strip 32x6 mm 75m length by means nuts check nuts and washers of gi or steel connected to main switch board including watering arrangement with pcc chamber ms wire gauge ci cover with frame incl excavation in any strata and returning filling removal surplus soil charcoal salt complete all as shown in electric plate no 3 of ssr part i earth test point shall be provided at suitable point, ml for cleaning of ug sewage sump by draining out water removing the silt mud and any other foreign materials from bottom of well of capacity up to 60 lakh ltrs using vehicle kambi 6 lcn mounted with compressor and sucker tank of ms kam-avida enviro engineers pvt ltd pune or similar model vehicle washing down with water for smooth functioning of sewage pipe lines disfection with bleaching powder etc applying one coat of white wash for the entire surfaces complete all as specified and as directed note the receipt of payment made towards the vehicle charges for removing of sludge shall be attached with the completion report submission without original receipt payment will not be done to the contractor, chemical and bacteriogical analysis of water as per is-10500 sample collected from bore wellsshallow wellsbwssb water user point all as directed by engr-in-charge note - water to be tested once in 1 months and approved at nabl lab note the receipt of payment made towards the water analysis charges to nabl lab shall be attached with the report submission without original receipt payment will not be made to the contractor
AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid
LOADING...
