4 Latest Dosing Devices Tenders in Military Engineer Services
Find the latest dosing devices tenders in military engineer services for 2026 from government departments, corporations and state PSUs. Get tender details and bidding information.
FILTERS
Category: Dosing devices
Organization: Military Engineer Services
Live Dosing Devices Tenders in Military Engineer Services 2026
1 |Bid Value:₹ 46.90 Lakh |EMD:₹ 93.80 K |19-09-2026 1 Day Left |T247 ID-103899196
m l for disconnecting all electric and water supply connections and other related items and lifting the unserviceable centrifugalmono block pump of capacity 4050hp 3 phase 415 v by mechanicalmanual method including dismantling the water supply lines and keeping the same in safe custody for repair including transportation of the defective pump set and motor from pump house to workshop for repair and back and re-installation the same on exisisting position after necessary repair including testing on completion all as directed by the engr-in-charge, m l for disconnecting all electric and water supply connections and other related items and lifting the unserviceable centrifugalmono block pump of capacity 20-30 hp 3 phase 415 v by mechanicalmanual method including dismantling the water supply lines and keeping the same in safe custody for repair including transportation of the defective pump set and motor from pump house to workshop for repair and back and re-installation the same on exisisting position after necessary repair including testing on completion all as directed by the engr-in-charge, m l for disconnecting all electric and water supply connections and other related items and lifting the unserviceable centrifugalmono block pump of capacity 75 to 15 hp 3 phase 415 v by mechanicalmanual method including dismantling the water supply lines and keeping the same in safe custody for repair including transportation of the defective pump set and motor from pump house to workshop for repair and back and re-installation the same on exisisting position after necessary repair including testing on completion all as directed by the engr-in-charge, m l for disconnecting all electric and water supply connections and other related items and lifting the unserviceable centrifugalmono block pump of capacity 5 hp 3 phase 415 v by mechanicalmanual method including dismantling the water supply lines and keeping the same in safe custody for repair including transportation of the defective pump set and motor from pump house to workshop for repair and back and re-installation the same on exisisting position after necessary repair including testing on completion all as directed by the engr-in-charge, m l for disconnecting all electric and water supply connections and other related items and lifting the unserviceable centrifugalmono block pump of capacity 2 to 3 hp capacity 3 phase 415 v by mechanicalmanual method including dismantling the water supply lines and keeping the same in safe custody for repair including transportation of the defective pump set and motor from pump house to workshop for repair and back and re-installation the same on exisisting position after necessary repair including testing on completion all as directed by the engr-in-charge, m l for dismantling the unserviceable parts and burnt out copper winding from pump - motor of capacity 30 to 50 hp 3 phase 415v and rewinding the motor with supper enamelled copper wire of suitable gauge including heating varnishing replacement of defective spare parts re-assembling and painting the motor with two coats of supper enamelled paint and carrying out necessary tests in presence at site as directed note- a spare parts copper winding wire will be measured paid seperately as all as per supply only 2 labour charge for fixing parts shall deemed to be included in the unit rate, m l for dismantling the unserviceable parts and burnt out copper winding from pump - motor of capacity 75 to 20 hp 3 phase 415v and rewinding the motor with supper enamelled copper wire of suitable gauge including heating varnishing replacement of defective spare parts re-assembling and painting the motor with two coats of supper enamelled paint and carrying out necessary tests in presence at site as directed note- a spare parts copper winding wire will be measured paid seperately as all as per supply only 2 labour charge for fixing parts shall deemed to be included in the unit rate, m l for dismantling the unserviceable parts and burnt out copper winding from pump - motor of capacity 2 to 50 hp 3 phase 415v and rewinding the motor with supper enamelled copper wire of suitable gauge including heating varnishing replacement of defective spare parts re-assembling and painting the motor with two coats of supper enamelled paint and carrying out necessary tests in presence at site as directed note- a spare parts copper winding wire will be measured paid seperately as all as per supply only 2 labour charge for fixing parts shall deemed to be included in the unit rate, supply only copper winding wire with supper enamelled copper wire of suitable gauge as per capacityrating of motor complete all as specified and directed by engr - in - charge, taking down the unserviceable parts from the centrifugal pump of capacity 30-50 hp three phase 415 v including over hauling servicingcleaning throughly discharge suction cases impellers shaft and re-assembling pump carefully including servicing cleaning and painting the parts with two coats water proofing supper enamelled paint after preperation of surfaces manualy including repairreplacement of unservicable parts as required at site etc and re-assemblingre-installing the pump complete all as specified and directed note- a spare parts shall be measured paid seperately as supply only items b labour charge for fixing parts shall deemed to be included in the unit rate, taking down the unserviceable parts from the centrifugal pump of capacity 75 to 20 hp three phase 415 v including over hauling servicingcleaning throughly discharge suction cases impellers shaft and re-assembling pump carefully including servicing cleaning and painting the parts with two coats water proofing supper enamelled paint after preperation of surfaces manualy including repairreplacement of unservicable parts as required at site etc and re-assemblingre-installing the pump complete all as specified and directed note- a spare parts shall be measured paid seperately as supply only items b labour charge for fixing parts shall deemed to be included in the unit rate, taking down the unserviceable parts from the centrifugal pump of capacity 2 to 50 hp three phase 415 v including over hauling servicingcleaning throughly discharge suction cases impellers shaft and re-assembling pump carefully including servicing cleaning and painting the parts with two coats water proofing supper enamelled paint after preperation of surfaces manualy including repairreplacement of unservicable parts as required at site etc and re-assemblingre-installing the pump complete all as specified and directed note- a spare parts shall be measured paid seperately as supply only items b labour charge for fixing parts shall deemed to be included in the unit rate, m l for machine work to the worn out portion of non clog submersible pump shaft of capacity including metalling cutting polishing and checking the accuracy on the lath machine complete all as directed by engr-in-charge, supply only ball bearing for motor all as per existing and specified and directed by engr-in-charge, supply only mechanical seal for for pump - motor all as per existing ans specified and directed by engr-in-charge, supply only impeller as per existing all as per specified and directed by engr-in-charge, supply only impeller key as per existing all as per specified and directed by engr-in-charge, m l for machine work to the worn out portion of non clog submersible pump shaft of capacity including metalling cutting polishing and checking the accuracy on the lath machine complete all as directed by engr-in-charge, supply only ball bearing for motor all as per existing and specified and directed by engr-in-charge, supply only mechanical seal for for pump - motor all as per existing ans specified and directed by engr-in-charge, supply only impeller as per existing all as per specified and directed by engr-in-charge, supply only impeller key as per existing all as per specified and directed by engr-in-charge, m l for machine work to the worn out portion of non clog submersible pump shaft of capacity including metalling cutting polishing and checking the accuracy on the lath machine complete all as directed by engr-in-charge, supply only ball bearing for motor all as per existing and specified and directed by engr-in-charge, supply only mechanical seal for for pump - motor all as per existing ans specified and directed by engr-in-charge, supply only impeller as per existing all as per specified and directed by engr-in-charge, supply only impeller key as per existing all as per specified and directed by engr-in-charge, m l taking out vertical submersible pump motor set from existing borewellof capacity from 20 hp to 75 hp capacity dismantling pump complete after disconnecting all electrical connections and repairoverhauling including replacement of following worn out parts as per sample note i spares required for replacement shall be measured and paid as supply only under respective items ii reassembling lowering in sewage sump to its original place testing and transport will be included in quoted rate, supply only gun metal bush of capacity complete all as specified directed, supply only impeller complete all as specified and directed, supply only impeller key complete all as specified and directed, supply only neck ring bronze complete all as specified and directed, supply only guide ring complete all as specified and directed, supply only lock bolt for impeller complete all as specified and directed, supply only shaft sleeve complete all as specified and directed, supply only shaft coupling screwed complete all as specified and directed, supply only coupling pin bush complete all as specified and directed, supply only ball bearing complete all as specified and directed, supply only lock bolt for shaft coupling complete all as specified and directed, all as per item no 1501 but top shaft complete all as specified and directed, supply and fix in repair dol starter along with single phase preventor in sheet steel enclosure 3 phase 415 volts with contactor suitable for 1 to 6 hp electric motor complete all as specified and directed make lt mk1 dol bchhavells, supply and fix in repair dol starter suitable of pumps of capacity upto 10hp heavy duty complete including replacement of existing starter complete make la mk1 dol bchhavells, supply and fix in repair fully automatic fasd star delta starter along with single phase preventor in powder coated enclosure with pu gasket suitable 5 hp to 10 hp including all electric connection with ammeter and volt meter onoff trip indicator including protection against phase failure phase imbalance phase reversal complete all as specified and directed make lt mk1 fasdbch havells, m l for repairservicing of existing sluice valve of 100 mm after dismantling of upper cover remove the spindle and make it leak proof by replace the gland packing nut bolt with washer and gasket of both side all as per specified and directed by engr-in-charge, m l for repairservicing of existing sluice valve of 150 mm after dismantling of upper cover remove the spindle and make it leak proof by replace the gland packing nut bolt with washer and gasket of both side all as per specified and directed by engr-in-charge, s f in replacement voltmeter digital type complete all as specified and directed by engineer - in - charge, s f in replacement ammeter digital type of capacity up to 100 amp complete all as specified and directed by engineer - in - charge, supply and fix in repairs on-off push button pendants with elements red green orange complete all as specified and as directed by engr-in-charge, supply fixing mcb single pole and neutral spn of capacity 63 amps 240 volts breaking capacity 10 ka c series fixed in proper position all as directed by the engineer-in-charge make legrand or equivalent, supply fixing mcb single pole sp of capacity 6 amps to 32 amps 240 volts ac breaking capacity 10 ka c series fixed in proper position all as directed by the engineer-in-charge make legrand or equivalent siemensabb, material and labour for development of tube well by at the site including dismatling existing gicpvchdpe bore well pipes up to 120 mtrs depth including taking up submersible pumps and flushing of bore well with air compressor of capacity 250psi1000 cum and related accessories at least 10 hours till water discharge is free from sand and potable water and to achieve maximum discharge capacity including necessary development complete and lowering submersible pump with gicpvchdpe borewell pipes complete including testing of borewell all as specified and directed note i unit rate quoted under this items shall deemed to be inclusive of transportation of tools and equipments as required to the site of work and removing the same after completion of work ii verticality test of the tube well structure shall be carried out and the cost of the same shall be deemed to be included in unit quoted rate, excavation in trenches not exceeding 15 metre wide and not exc 15 metre in depth for foundation of pole stay or cable trenches and getting out in soft disintegrated rock complete all as specified and as directed by the engineer in charge, returning filling in incl spreading leveling watering and well ramming in layers not exceeding 25 cm in soft loose soil complete all as specified and as directed by the engineer in charge, removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 15 metre above the starting point all as specified and as directed by the engineer in- charge, sf cpvc ball valve of size 20 mm dia suitable for cpvc pipe incl necessary fittings and taking down old one complete all specified and directed make supremeeurotech astralsfmc, supply and fix in trenches high pressure cpvc pipes sdr-135 plain cpvc sdr 11 fittings including all necessay fittings solvents of size 40 mm dia complete including taking down old one all as specified and directed make supremeeurotech astralsfmc, supply and fix in trenches high pressure cpvc pipes sdr-135 plain cpvc sdr 11 fittings including all necessay fittings solvents of size 20 mm dia complete including taking down old one all as specified and directed make supremeeurotech astralsfmc, m l for replacement of foot valve 4050 mm dia pipe complete including taking tp suction lines from up sump of depth max up to 50 mtrs and lowering after replacemnt of foot valve complete all as specified, m l for replacement of foot valve 80 mm dia pipe complete including taking tp suction lines from up sump of depth max up to 50 mtrs and lowering after replacemnt of foot valve complete all as specified, m l for road cutting hard standing for width not less than 30 cm and not exceeding depth up to 45 cm for laying of pipe lines and making good to road hard standing area with necessary cement concrete complete all as directed, sump of capacity 1 00 000 gln at main pump house and g13, sump of capacity 50 000 gln at main pump house offs md accn area swimming pool, sump of capacity 40 000 gln ward room mess, sump of capacity 25 000 gln at dsc civ md accn, oht of capacity 50 000 gln at family qtr oht, oht of capacity 75 000 to 1 00 000 gln at eklavya, oht of capacity 5000 gln at near mi room auditoriummysure block, sump of capacity 1 75 000 gln at new nwc, ml for cross arm bracings support clamps and back plates fabricated from structural steel section including nuts bolts washer welding drilling hole for bolts bending in any shape or size as indicated or directed and inclusive of one coat of aluminium primer one under coat and one finishing coat of aluminium paint for for repair repalcement of portion of existing ladder at oht as per existing specification frame cover for valve chamber etc complete all as specified and as directed, m l for dismantling cross-arms of ms channel or angle sections etc complete and setting aside for re-use with in 50m, ml for earthing complete with galvanised steel earth plate electrode 600 x 600 x 60 mm thick burried directly in gorund earth pit not less than 225 mtr normal ground level and top edge of earth plate not less than 15 mtr below normal ground level using galvanised iron strip 254mm as earthing lead with bolts nuts check nuts and washers of galvanised iron protection pipe light grade of 40 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt watering funnel with wire mesh earth pit chamber and cover ci frame pcc 136 type c-2 all as shown in electrical plate no-3 of ssr part-i of 2009 connected to earthing test point all as specified and indicated including all earth work excavation returning filling and disposal of surplus soil and testing on completion, supply fix and testing smart digital 10-levels indicator stage type with mechanism to detect display the water level in an underground overhead tank fixed on wall oht with necessary pvc corrosion free enclosure corrosion maintenance free magnetic sensors buzzer alarm sounds on low high levels including necessary fittings on sensing the water level from oht of height up to 21 mtrs ug sump of depth at 60 mtrs complete make sinetrac, m l for testing of water samples from sourceinside the ins mandovi from ohtsumpbore wellsany service tanks and testing in govt lab govt approved pvt labs for bacterial and chemical testing of water sample to find out the total coliforms e coli faecal coliforms ph nitrates nitrates and turbidity complete including taking the samples in every qe as and when required as directed by engineer in charge note the m l for collection of samples including new container as per lab standards transportaion cost up to lab is included in unit rate, supply fabricating installation in replacement self illumnated acrylic led sig board factory made with fixed on wall iron frame as directed letter length 30 cm max up to 40 cm letter thickness 5 cm max up to 6 cm customized design of letters back-lit signage including embedding the signage baord firmly with the wall ms angle frameas per approved art work and nomenclature as given below - note nomenclature of sign board include letterslogos etc complete as directed box with frame - 25 x 25 mm square pipe 18 g frame with cross supports spacing not exceeding 10 m on the box length including 20 mm x 20 mm ms square pipe 18 g stifferenrs duly white enamel painted in 2 coats over a coat of zinc oxide iron primer depth of box should not be less than 165 mm side top back and bottom panels - made out of 24 gauge chemically treated gi sheets duly precoated powder coated with white matt finish coating on both inner and outer surface top panel to have 24 guage precoated drip cap fixed with pop rivet or machine moulded to shape of 25 mm on front and side to prevent damages due to rain etc the bottom panel should be provided with access door fixed with ss screws and suitable housing for led drivers led module - led 12v module beam angle 150 degrees with ip rating 64 072 w70 lumens per module of 3 leds with 7000 to 8000 k colour temperature make tridonic osram cree ge led configuration - 29 led modules per sq mt equal division on spacing based on height of box and one module every 020 m on running length of box led power supply - input 230 v ac power supply should be cpcc constant power constant current of 30w60w120 w each graphics - graphics shall be computer plotter cut with translucent cast vinyl matching the colour specification of the installation, m l for servicing of filtration plant at water supply installations including removing the existing gravels in sand filter complete painting of filtration plant including replacing unserviceble nuts bolts of cover plate complete note work shall be done through the reputed firm sandgravepubbles required for replacement is measured and paid seperately under respective items, supply and fill in replacement pabbles size 1 15 mm in sand filter including getting out from the filter all as per specified and directed by engr-in-charge, supply and fill in replacement pabbles size 1 - 34 mm in sand filter including getting out from the filter all as per specified and directed by engr-in-charge, supply and fill in replacement pabbles size 34 12 mm in sand filter including getting out from the filter all as per specified and directed by engr-in-charge, supply and fill in replacement corese siliex size 12 14 mm in sand filter including getting out from the filter all as per specified and directed by engr-in-charge, supply and fill in replacement corese siliex size 14 110 mm in sand filter including getting out from the filter all as per specified and directed by engr-in-charge, supply and fill in replacement graded sand in sand filter including getting out from the filter all as per specified and directed by engr-in-charge, m l for surface excavation at water supply installations not exceeding 30 cm deep and averaging 15 cm deep and getting out soft loose soil removing shrubs small trees height up to 10 mtrs removing the grass from route as directed note i rate includes removing all waste material and grass not excceding 250 mtrs distance from installation depositing where directed at a level not exceeding 15 mtrs above the starting point and cleaning of yard complete all as specified and directed by eicii repeated cleaning in each installation shall be measured and paid seperately with time interval of minimum 2 months, m l for laying of weed control mat sorrounding area of over head tank ug sump insid ethe water supply installations of size thickness less than 100 gsm ans size 1012 x 100 mtrs of roll laid in level surface with 7 inch 18 cm high quality pvc nails for firm hold for weed mat at earth surfaces in regular intervals in between 5 mtrs complete alla s specified and as directed, supply and fix fire retardant insulated synthetic mat for lt 1100 volt of 20 mm thick - 10 conforming to is tested for breakdown strength ageing properties insulation resistance effect of acid alkaline diesel transformer oil leakage current test fire test etc having the width of 1000mm -20mm complete as required sutable and using adhasive and alied chemical and scaling of all part s of all joints and border ends and fixing tape making good as paste near lt panel boards complete all as specified and as directed make vardhamanjyothicease fireqquivalent, s f junction box made from smcfrp sheet ready made of size300x 200x105 mm with aluminium bus bar of 100 amp capacity for ryb and half for neutral made in suitable size fixed inside the junction box with necessary supporting insulators fixed on hylem sheet ms sheet steel fixed inside the bottom portion of box to connect the cable gland complete entire assembly fixed to pole wall with ms clamp 25 x 5 mm and nuts bolts or inside the copping of pole post top including mcb sp 6 amp 10 ka 240 v - 1 no with necessary size copper lugs for connecting cables from junction box to fittings complete all as directed by engineer-in-charge make sintex right hingedhensal, s f lt feeder piller box 20 mm thick oin door type cpri approved with 100 amp copper bus bar for ryb and neutral with necessary control wiring consisting of following - incomming mccb 100 amp 4 pole 16 ka - 01 nos multi function meter for v-a-f -01 nos indicating lamp for ryb - 01 set out going mcb tpn - 32 amp - 02 nos mpcb 20 - 25 amp with ol sc and single phase preventer - tpn 32 amp 10 ka - 02 nos fully automatic starter for 10 hp pump motor - 02 nos curent transformer 20 25- 5amp - 06 nos push buttonfor startstop - 04 nos led indicating lamp onoff trip - 06 nos mcb 6 amp - 02 nos note i panel shall be floor mounted inside the pump house ii minor variation in range of starter mpcb ct shall be selected as pe the make approved, supply and fix in replacement hdpe pipe of pressure rating 6 kgf sq cm of size 50 mm inner dia in bore well including all necessay fittings like elbow tee socket reducer bushings step over bends end caps end plugs etcand with including taking up old unserviceble gi pipes pipes complete all as specified and directed by engineer in charge make supremeeurotech astralsfmc, sf pvc insulated pvc sheathed stranded copper conductor as in flat submersible water proof cable of size 16 sqmm 3 core 1100 volts grade incl taking down old one complete as specified and directed, sf pvc insulated pvc sheathed stranded copper conductor as in flat submersible water proof cable of size 10 sqmm 3 core 1100 volts grade incl taking down old one complete as specified and directed, sf pvc insulated pvc sheathed stranded copper conductor as in flat submersible water proof cable of size 6 sqmm 3 core 1100 volts grade incl taking down old one complete as specified and directed, sf pvc insulated pvc sheathed stranded copper conductor as in flat submersible water proof cable of size 4 sqmm 3 core 1100 volts grade incl taking down old one complete as specified and directed, m l for painting of incoming and outgoing pipes of oht sumps with standard colour code for ci pipe of sixe 100150 mm dia complete all as specified, m l for ms pipe of sise 150 mm dia with necessary bend tee weldding as required at size including necessary fittings to join with existing gici pipe lines complete all as specified and as directed, m l for ms pipe of sise 100 mm dia with necessary bend tee weldding as required at size including necessary fittings to join with existing gici pipe lines complete all as specified and as directed, m l ci fitting for bends any type radius and angle tapers any type straight bend increasing decreasing or double socket etc tee pieces single branch y junction double branch cross flange sockets or socket and spigot collars caps and plugs all complete all as specified and as directedsize up to 150 mm bore, sf in replacement butter fly valve in any positionof size 150 mm dia including rubber gasget nut bolts washers including taking down unserviceable valve complete all as specified and directed, sf in replacement nrv in any positionof size 100 mm dia including rubber gasget nut bolts washers including taking down unserviceable valve complete all as specified and directed, sf in replacement nrv in any positionof size 80 mm dia including rubber gasget nut bolts washers including taking down unserviceable valve complete all as specified and directed, sf in replacement nrv in any positionof size 65 mm dia including rubber gasget nut bolts washers including taking down unserviceable valve complete all as specified and directed, sf in replacement nrv in any positionof size 50 mm dia including rubber gasget nut bolts washers including taking down unserviceable valve complete all as specified and directed, supply fixing in and replacement of unserviceable automatic pressure switch for 1 hp to 2 hp booster pump all as specified and as directed, supply and fixing in replacement of surge tank booster tank suitable for booster pump including taking out the old one all as specified and as directed, supply and fixing in repalcement of manifolder connector asswembly for booster pump 5 way suitable for booster pump including taking out the old one all as specified and as directed, supply and fixing in repalcement of non return valve 25 mm for booster pump complete all as specifed and as directed, supply and fix in replacement of pressure gauge 0-5 kg cm2 for booster pump complete all as specified and as directed, supply and fix in replacement of motor of capacity 07510 hp for booster pump complete all as specified and as directed, supply and fixing of pressure booster pump 05 hp 10 hp 037kw 075kwrated voltage 220v voltage range 180v-260v 1ph rated frequency 50hz pipe size 25mm x 25mm max head up to 55 meters max discharge up to 4280 lph provided stainless steel insert for corrosion free stuck free operationhigh suction capacity instant suction up to 80 meters suction lift high grade brass impeller high grade electrical stamping reduces electrical losses improves pump effciencyeasy for maintenance make kirloskar crompton greaves havells, m l for dismantling of existing damaged valve pit complete and costruction of new brick masonary valve pit chamber of size 600 x 600 x 600mm internaldimensionincluding pcc brickwork and ms sheet cover 20 mm thick ms angle iron frame size 25mm x 25mm x 6mm around of valve pit locking arrangement with painting all steel surfaces with two coats of sythetic enamel paint over a coat of red oxide primer complete all as specified and directed, supply and fix in replacement panel mount digital voltmeter 0-500 volt complete, supply and fix in replacement panel mount digital ammeter 0-50 amp complete, supply and fix in replacemnet led type indicating lamp complete, supply and fix in replacemnet cts 50 5 amp complete, supply and fix in replacemnet cts 100 5 amp complete, yield test for the existing bore well by continuously pumping for 16 hours to determine safe pumping yield and submit the test report, ml for structural steel channels pcc foundationbase frame for motor of capacity upto 10hp including nuts bolts washer welding drilling hole for bolts bending in any shape or size as indicated or directed and inclusive of one coat of aluminium primer one under coat and one finishing coat of aluminium paint etc complete all as specified and as directed, ml for structural steel channels pcc foundationbase frame for motor of capacity 40hp50hp including nuts bolts washer welding drilling hole for bolts bending in any shape or size as indicated or directed and inclusive of one coat of aluminium primer one under coat and one finishing coat of aluminium paint etc complete all as specified and as directed
AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid
disconnecting dosing plant any model any capacity alongwith components dismantling and segregation of all parts for repairreplacement of defective part cleaning washingreassembling the plants connecting in position and testing complete all as directed by engr-in-charge spares will be measured and paid under item no 02 to 13 note - all the repairs required and pertain to dosing plant shall be carried out ensure at the concern installations by the contractor rep upto smooth functioning of the same non taken over site by the contractor and delay in repair if noticed the recovery shall be made rs 500- per day from contractor bill till complete the job because of unchlorinated water cannot be supplied to the troops complete all as specified and directed by engr-in-charge, supply only suction valve assy complete of dosing plant liquid end as per sample, supply only discharge valve assy complete, supply only diaphragm for dosing plant liquid end as per sample, supply only foot valve assembly for dosing plant liquid end as per sample, supply only nrv assembly for dosing plant as per sample, supply only head for dosing plant liquid end as per sample, supply only tubing for dosing plant including all accessories liquid end as per sample, supply only injector valve including fitting as per sample, supply only pcb for dosing pump as per sample, supply only impeller of agitator blade made of pvc all as per sample, supply only extended agitator shaft of non-corrosive material all as per sample, supply only complete set of o rings, dismantelling of old burnt motor of dosing plant 960 rpm and rewinding with super enamelled copper wire with replacing all unserviceable parts of motor for making it as serviceable including fixing new ball bearing etc complete all as specified and directed by engr-in-charge note - spare part shall be included in quated rate, repairreplacement of chemical decrin dosing pump model no c 24121 non-metalic diaphragm type for injection of dixinfection of water treatment injection capacity 145 lph type magdomd2040 having 145 lph at 13 kgcm2 bar discharge working pressure solenoid driven electrically control 220 volts maximum current 01 amps with ip 65 protection and f class insulation with standard fittings with stoke length suitable from 0-100 and stock frequency suitable from 0-to 100 minimum included all accessories such as football line injection valve suction valve deliveryvalve and pe tubing consistencey in performance complete all as specified and directed by engr-in-charge make - jescodeclibac, supply and filling in dozing plant calcium based high strength chlorination chemical for water disinfectant in granular form in factory sealed hdpe container 40 to 50 kg each chlorine concentration level 65-70 complete all as specified and directed, supply and filling in dozing plant calcium based high strength chlorination chemical for water disinfectant in granular form in factory sealed hdpe container 40 to 50 kg each chlorine concentration level 90-99 suitable for chlorination of swimming pool water tcca-90 complete all as specified and directed, supply only soda ash crystal grade 1 of best quality incorporated for improvement of swimming pool water complete all as specified and directed, supply only alam crystal grade 1 of best quality incorporated for improvement of swimming pool water complete all as specified and directed, supply only copper sulphate crystal grade 1 of best quality incorporated for improvement of swimming pool water complete all as specified and directed, ml for bacteriological and chemical analysis of water sample of borewell water from director of health services environmental and pollution control wing pathankot note - a the water sample shall be carried in sterilised bottlewatercan which will be issued by director of health services environmental and pollution control wing pathankot b the rate quoted shall be deemed to includingude transportation cost cost of sterilised bottle, supply installation in replacement of old dosing tank model no- ads-1 having 100 ltrs frp tank with inbuilt motor and agitator capacity 100 ltrs mocpefrplid containing port hole for pouring chlorination chemical and water when necessary provision for mounting of motor at proper angle provision for mounting dosing pump on lid level gauge make - declibacaquafitpurichlor, ml for repair of solar water heater capacity upto 200 lpd after carefully opening of different tubes electrical connection and unscrewing of nuts and bolt from foundation refixing the same after cleaning and serviceable complete all as specified and directed, ml for repair of solar water heater capacity upto 1000 lpd after carefully opening of different tubes electrical connection and unscrewing of nuts and bolt from foundation refixing the same after cleaning and serviceable complete all as specified and directed, supply and replacement 3 layer pp-r polypropylene random copolymer concealed pipe 25mm dia sdr 74pn-16 uv stablised and antimicorobial fusion welded having thermal stability for hot and cold water suppy all pp-r plain brass threaded polypropylene random fittings laid in trenches including taking out all as specified and directed by engr-in-charge, supply and replacement 3 layer pp-r polypropylene random copolymer concealed pipe 20mm dia sdr 74pn-16 uv stablised and antimicorobial fusion welded having thermal stability for hot and cold water suppy all pp-r plain brass threaded polypropylene random fittings laid in trenches including taking out all as specified and directed by engr-in-charge, sf in replacement of broken flat collector plates tinted glass of solar panel length and size as per existing sample new one including lifting from floor to roof of the building by manually or mechanically is included in the coated rates complete all as specified and directed, m l for rubber flexible hose pipe of dia as per existing heat resistance type suitable for solar plant of diff capacity with suitable clamps nut and bolts complete all as specified and directed, supply and replacement evacuated heat tube of any size by taking out the broken tube complete, supply and replacement pp-r gate valve brass inserted 25mm dia, supply and replacement pp-r gate valve brass inserted 20mm dia, supply and replacement rotation moulded polyethylene water storage tank cylinderical vertical with closed top hoisted and fixed in position of capacity 500 litre including taking down unsv broken tank, s f tank nipple after making proper hole in inlet and outlet portion all as specified, s f 20mm dia brass ball valve high or low pressure with plastic floats and iron rod complete all as specified and directed, supply and replacement of heating element 3000 watt for solar water heater, supply and replacement of thermostat suitable for solar water heater, supply and laying or fixing or passing through pipe 1100 volts grade heavy duty cable with pvc insulated 3 core stranded copper conductor served with an inner sheathing of pvc tape pvc sheathed 25 sqmm nominal cross section in service connectionlight connections in solar water heater including taking out old unserviceable cable complete all as specified and directed by engr-in-charge, supply and fix or laying in trenches pvc pipe 25 mm dia heavy duty for cable protectionfixing of garden lights etc of the following sizes including necessary teeelbowjunction box etc provision for cable entry if reqd in garden lights complete including taking out old unserviceable pipe as required complete all as specified and directed by engr-in-charge, repair to washing machine hydro extractor of cap 30 kgs 3 ph 415 volts 50hz ac complete and after completion of work testing of the machine all as specified and directed by engr-in-charge note - defective major componentsspares elaborated hereafter in respecive item of schedule shall be measured as supply only, supply only ls contactor 3 pole 220 volts suitable for 30 kgs, supply only selector 800 smr complete for dryer of capacity 30 kgs as per sample, supply only iblar sleeves for 30 kgs washing machine as per sample, supply only iblar bearing for 30 kgs washing machine as per sample, supply only single phase preventor suitable for 30 kgs washing machine as per sample, supply only relay 25 amp to 6 amp for dryer machine motor as per sample, supply only stainless steel spring assy for 30 kgs laundry machine as per sample, supply fixing of the following parts for washing machine hydro extractor of cap 25 kgs and tumbler drying machinme 25 kgs three ph 415 volts 50 hz ac complete and servicing greassing and gland dori for motor and testing after completion of work all as specified and directed by engr-in-charge note - defective major componentsspares elaborated hereafter in respecive item of schedule shall be measured as supply only, supply only iblar bearing for 25 kgs washing machine as per sample, supply only single phase preventor suitable for 25 kgs washing machine as per sample, supply only pressue switch suitable for 25 kgs washing machine as per sample, supply only pressue switch pipe suitable for 25 kgs washing machine as per sample, supply only door openclose sensor for loundry machine dryer of capacity 25 kgs as per sample all as specified and directed, supply only stainless steel spring assy for 25 kgs laundry machine and dryer assy as per sample all as specified and directed, s f in repairreplacement of retro reflective informatory sign board of size 900x600 mm made out of 3 mm thick aluminium composite sheet both faces to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as per sample with necessary led lights and provision of electric wiring including connection etc complete of suitable size copper wire letter symbols borders etc as per requirement will be as per irc -67 with required colour scheme on the boards with the high intensity grade a ss sheet to be rivetedwelded to stainless steel squre frame of 30x30 mm and fixed on top of the ph bldgs with support of ss pipe 304 grade round square as per required length the board will be fixed welded to the frame and fixing ph bldgs with pcc 136 after necessary earth work complete all as specified and directed, overhauling and repair of 3 phase 50 hp 37 kw re-circulating centrifugal pump set swimming pool of any make by disconnecting electricalmechanical connection taking up motor from foundation transporting to workshop to carry out repairs replacement of minor unserviceable componentsspares like suctiondischarge nozzle oil rings casing wear ring shuffing box throttle bushing wear rings nuts bolts washer etc including necessary lathe work welding metaling turning polishing repair of housing case of dende side reassemble all the parts componants refix at same position in alignment reconnection re-commissioning and testing to ensure efficient and smooth functioning to achieve desired discharge of pump complete all as specified and directed note i defective major componentsspares elaborated hereafter in respecive item of schedule shall be measured as supply only ii cost of minor spares and welding work etc as mentioned above are included in the quoted rate, supply and fixed mccb 250 amps 4 pole 36 ka adjustable type magnetic setting and fixing in exisiting db and making connection with cable by means of suitable size of thimbles complete all as specified and directed, supply and fixed mccb 400 amps 4 pole 35 ka adjustable type magnetic setting and fixing in exisiting db and making connection with cable by means of suitable size of thimbles complete all as specified and directed, ml for rewinding of 3 phase electric motor of 50 hp 37 kw re-circular centrifugal pump swimming pool with super enamelled copper winding wire of same gauge including impregnated paper sleevs lathorised fibre glass varnish and tape etc complete all as specified and directed, supply installation commissioning and testing star delta starter suitable for 50 hp ml4f motor relay range 30 to 50 amp including single phase preventor fully automatic in sheet metal enclosure type ac 3 phase 415 volts 50hz including taking out old unsv starter complete all as specified and directed make ltabb havells or equivalant as approved, supply and fixing cast iron non return valve 150 mm bore dia flanged ends drilled holes including jointing material such as rubber gasket bolts nuts and washers of suitiable size complete all as specified and directed make - ltupadyayzoloto, supply and fixing cast iron sluice valve 200 mm bore dia with steel spendle and ci wheel flanged ends drilled holes including jointing material such as rubber gasket bolts nuts and washers of suitiable size complete all as specified and directed, all as per item no 61 above but 150 mm bore dia, repair overhauling of suction swipper machine mono block upto 2 to 5 hp by replacing worn out gland packing gasket bearing bushes gasket bearing bushes scraping out of pump casing bolts nuts washers etc cleaning greasingh tightening of bolts nuts including painting with one coat of synthetic enamelled paint to pump only re-installation including alignment with motor testing complete all as specified and directed, sf nylon brush 50cm x 70 cm for swimming pool conform to sample complete all as specified and directed, sf nylon brush 80cm x 75 cm for swimming pool conform to sample complete all as specified and directed, ml for pvc insulated 3 core 6 sqmm copper submersible flat cable and making necessary connection complete all as specified directed, sf in repair sheet metal enclousures of single pole neutral with two pin and earth plug socket with 20amp 240v mcb for solar water heaters complete all as specified and directed, sf in repair for circuit submain wiring alongwith earth wire size 2x25 sqmm 1x 25sqmm of fr pvc insulated copper conductor 2 core cable in surface recessed through 20mm bore pvc pipe fixed on wall with clamps as required complete all as specified and directed, sf 15mm bore dia bib taps long body cast copper alloy chromium plated fancy type isi marked as per sample with crutch or butter fly handles screwed down screwed for iron pipe complete all as specified and directed, sf framed work such as grills gratings etc with ends of bars shouldered andor riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framework of water tanks and similar work conforming to fe290gde-e-165 complete all as specified and directed, ml plain cement concrete 148 type d2 using 40mm graded crushed stone aggregate as in poles and mass concrete etc complete all as specified and directed, sf in repair solar water heater tank of capacity 200 ltrs including puf insulation made out of ss-304 ss-316 material as per sample complete all as specified and directed, ml in repair leakage of solar water tank providing welding work re-coating as required at site complete all as specified and directed
AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid
taking down of existing double reduction gear box with impellerpaddie fan shaft assemebly complete coupled with 3 phase 415 v electric induction motor up to 1hp mountain on common ms base framestructure and deposited to mes yard of ge army jamnagar complete all as specified and directed by engineer-in-charge, taking down of existing triple reduction gear box with impellerpaddie fan shaft assemebly complete coupled with 3 phase 415 v electric induction motor 3 hp mountain on common ms base framestructure and deposited to mes yard of ge army jamnagar complete all as specified and directed, repair and overhauling of existing alum mixermixing chamber including complete cleaning and removal of sludge deposited alum loose concrete damaged plaster and unwanted materials from the chamber and surrounding area cleaning and preparation of internal surfaces carrying out necessary pcc repair to damaged portions repairing cracks honeycombed and damaged concrete surfaces with suitable cement mortarrepair mortar providing cement plaster to internal surfaces wherever required providing suitable waste-water outlet arrangement for draining the accumulatedwaste water from the chamberdrain including making necessary opening in the existing wall providing suitable size giupvc pipe outlet with heavy-duty tapvalve socket bend coupling and other required fittings properly sealed and grouted in the wall including necessary civil work testing and making good the surrounding surface complete all works shall include labour materials tools and tackles scaffolding transportation debris removal curing and finishing complete in all respects as required for satisfactory operation of the alum mixing system complete cleaning and making the chamber fit for operation, m l for cleaning and plaster repair of two side drainage channels each approximately 1000 m long 005 m wide including removal of sludge silt and deposited material surface preparation pccrepair wherever required cement plaster to sides and bottom proper slope towards outlet curing and complete cleaning, m l for systematically inspecting disassembling and replacing worn internal gear bearing and seals of double reduction gear box having two-stage reduction ratios of 301 and 251 giving an overall reduction ratio of 7501 complete with heavy-duty cast ironsteel housing hardened alloy steel gears precision machined shafts bearings oil seals lubrication arrangement inspection cover and all necessary accessories coupled with 1 hp 3-phase induction motor suitable for 415 v 50 hz ac supply complete with flexible coupling coupling guard ms base frame foundation bolts alignment lubrication oil and all necessary accessories including installation testing and commissioning complete as required and directed, m l fo systematically inspecting disassembling and replacing worn internal gear bearing and seals of triple reduction gear box comprising three-stage reduction arrangement with individual reduction ratios of 601 501 and 151 giving an overalltotal reduction ratio of approximately 45 0001 complete with suitable heavy-duty cast ironsteel housing hardened alloy steel gears shafts bearings oil seals lubrication arrangement inspection cover and all necessary accessories coupled directly with 2 hp electric indicator motor suitable for 415 v 3-phase 50 hz supply complete with flexible coupling base frame foundation bolts alignment lubrication oil and all accessories as required and directed by engineer-in-charge, m l for supply laying jointing commissioning and testing of ms erw flanged pipe heavy grade isi marked of 100 mm bore as in network for filter water back wash air grid piping perforated type 3mm dia drilled hole in every 100mm in zig zag pattern for rapid filter tank laterals by making necessary holes as directed and header connecting filter beds and fitted with existing pipes including all required modification for connection by required mscidi fittings with including epoxy painting of external surfaces fitted at filter bed as per standard design specifications including taking up or down existing ms pipe of 100mm bore of any description complete all as specified and as directed, ml for pcc 124 type b2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified and directed, m l for cleaning of area around filter plant including removal of bushes grass weeds rubbish loose earth debris and other unwanted materials uprooting of vegetation collection and disposal of waste to approved dumping place dressing spreading and leveling of existing earthsoil including filling of minor depressions cutting of high spots rammingcompaction and making the area even and suitable for proper drainage complete as directed by engineer-in-charge, m l for providing and laying factory-made cement concrete interlocking paver blocks of approved quality 80 mm thick of approved colour shape and pattern over prepared sub-grade including dressing and leveling of ground providing and compacting granularsub-base as required laying and compacting 4050 mm thick coarse sand bedding laying paver blocks to required line level and slope filling joints with clean fine sand mechanical compaction with plate vibrator cutting of blocks at edges and all incidental works complete as directed by engineer-in-charge
AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid
excavation in trenches for laying of gi water tubing etc getting out in softloose soil nexc 15m wide and nexc 15m depth complete all as specified and directed, returning filling in trenches including spreading leveling watering and in layers nexc 25cms thick without damaging pipesspecial fittings as in any type of soil complete all as specified and directed, removing excavated materials to a distance nexc 50m and depositing where directed at a level nexc 15m above the starting point complete all as specified and directed, supply and fix for gun metal gate valve 50mm bore pipe isi marked with iron wheel head screwed both ends for iron pipe suitable of pipe including taking down old existing gate valve complete all as speficied and directed, all as per item no 400 above but 40 mm bore pipe complete all as speficied and directed, all as per item no 400 above but 25 mm bore pipe complete all as speficied and directed, all as per item no 400 above but 20 mm bore pipe complete all as speficied and directed, all as per item no 400 above but 15 mm bore pipe complete all as speficied and directed, supply and laying in trenches steel water tubing galvanised 50mm dia medium grade and connection including fitting like tee bend socket elbow short pieces connectors plugs and unions etc cutting threading complete all as specified and directed, all as per item no 900 above but 40 mm dia complete all as speficied and directed, all as per item no 900 above but 25 mm dia complete all as speficied and directed, all as per item no 900 above but 20 mm dia complete all as speficied and directed, all as per item no 900 above but 15 mm dia complete all as speficied and directed, taking down old unserviceable 50 mm dia gi pipe and complete all as specified and directed, all as per item no 1400 above but 40 mm dia complete all as specified and directed, all as per item no 1400 above but 25 mm dia complete all as specified and directed, all as per item no 1400 above but 20 mm dia complete all as specified and directed, all as per item no 1400 above but 15 mm dia complete all as specified and directed, labour for day to day complaint such as cleaning of fountain nossel through wire chemical after cleaning refixing to all in proper manner any type check the serviceability of fountain light which is available in site fixing of missing nossel controling pvc valvegi handle including gi fittings as union socket elbow nipple etc by techinical rep as a plumber with helper and required tp tool kit complete for making serviceable to fountain dosing system swimming pool serviceability chek and minor maintenance done through complaints supply item will be paid seperatly in day to day complaint basic per day under maintenance work with all other site required work making for serviceable complete as directed note - i required fittings shall be measured against respective item as under of this sch ii one unit shall be measured as per complaint slip given by deptt on day to day per day basis with minium two 02 complaints, supply and fixing in repairs of the dol star delta starter single three phase suitable for 075 to 5 hp motor complete all specified and as directed make lt or equivalent of havellsseimens, supply installation testing connecting in replacement to 5hp 3 phase water fountain motor suitable to work under water with adequate pressure in origional manufacturer etc all as given sample complete all specified directed make- kirloskar havells lt jindal siemens, supply installation testing connecting in replacement to 05hp15hp single phae water fountain motor suitable to work under water with adequate pressure in origional manufacturer etc all as given sample complete all specified directed make- kirloskar havells lt jindal siemens, supply installation testing connecting in replacement to 2hp3hp single phae water fountain motor suitable to work under water with adequate pressure in origional manufacturer etc all as given sample complete all specified directed make- kirloskar havells lt jindal siemens, supply and fixing water proof fountain led ligth fitting under water capacity 6x3 18 w watts full muilticoloured in colour red yellow and green ip- 68 240 volts dc 50 hzs energy saver enviorment friendly luminary wide beam super magnifying lense mocss 304grsurface clamp mounting with controller dmx-512 fixing arrangent as per existing making all electric connection with complete current leakage proof with three core ccopper cable and all other required accessories directed by engr-in-charge make rgp underwater siries model f- 26 26 a note warranty certificate with minium 02 yreas warranty shall be deposited by contractor, supply and fixing in replacement muilticore pvc insulated copper conductor cable 4 core 6qmm 1100 volts grade complete all as speicified make legrand havells plaza, supply and fixing in replacement rgb led contoller to be control for contoling colour ratio of light complete making electric connection all as directed by engr-in-charge make rgp underwater siries model dmx-512, supply and fixing in replacement constant voltage current led driver input ac 220-250 voltage output dc contoller for electric circuit all as directed by engr-in-charge make rgp underwater siries, supply and fixing in replacement stailess steel 304 gr stand abs casing for 6x3 watt led light complete all as specified and as directed, complete repairreplacement servicing of all type of filters and testing of reverse osmosis water treatment plant of capacity 5000 lph with chemical including complete checking of water supply line including valves etc for leakage including replacement of rubber gasket socket nut bolt any size of valves etc and complete system washing out to chemical liquid and all site required carried out all as entire satisfaction of engr-in-charge and carried out sf in replacement of the following unserviceabledamaged items as under note spares will be measured and paid sepratately against respective items, all as per item no 2900 above but supply and fixing of ro membrane type spiral wound membrane of dia 200 mm complete all as specified and as directed make american dow ge torry japan as approved by engr-in-charge note contractor should produce 01 year warranty certificate before claim for payment of this item, all as per item no 2900 above but taking down out media filter tank and removing of unsv all type of media cravels and refiling the all as per original exisiting good quality cravel medias carbon all types of stone as per site requirement complete all as specified and as directed, all as per item no 2900 above but taking down out removing unsv small iron filter jumbo pp out and replacement of as per exisiting original size qulity oem as per site requirement complete all as specified and as directed, all as per item no 2900 above but supply and fixing rotameter with clear indication of levels including low pressure switch complete all as specified and as directed, all as per item no 2900 above but 40mm pvc joint socket complete all as specified and as directed, all as per item no 2900 above but 20mm pvc joint socket complete all as specified and as directed, repairrepalcement of cpvc pipe line 32 mm dia od dr ii checking and arresting of leakage at both ends testing of leakage rectifing before supply complete all as specified and directed, all as per item no 3600 above but 25 mm dia od sdr ii complete all as specified directed, supply only chemical for water testing of analyzing chlorine percentage in raw wate complete all as specified and as directed by engr-in-charge make-aquasol etc, supply installation connecting in replacement to chlorine dosing system of net capacity 170 litters made out frp dia 650 x net height 375 conical 300 mm gross height with stand 1000 mm consisting of water inlet oulet with y strainer drain over flow level gauge agitator 120watt 900 rpm single phase flange mounted motor with plastic shaft and impeller and service tank with high pressure single head adjustable chlorine dosing system induction motor suitable for water treatment chemical mixture tank 220 volts single phase 950 rpm 746w 1 hp with long shaft and fan for mixing to chemical in origional manufacturer etc all as given sample complete all as specified directed, ml for re -winding to burnt out winding of fountain submersible motor body primary winding stator as same in existing size gauge no of turns qty of insulation etc using supperior quality water proof copper winding wire isi marked origional manufacturer and submersible copper cable in required lenght and size for making connection minium 15 mtrs long out side re-assembling full load testing heating drying varnishing overhauling re-installation commissioning testing and connecting capacity 5 to 75 hp including cutting removing to old burnt out winding complete all as specified directed note - i testing shall be given by contractor at site with satisfactorily functional ii quoted rate shall be including all work required at site for making fuctional to pump motor set, all as per item no 4000 above but capacity 1 hp to 4hp of submersible motor complete all as specified directed, material and labour for pcc 136 type c2 using 20mm graded stone aggregate for making good disturbed surfaces road pavments foot paths etc complete all as specified and directed, taking down old defective ci non return valve supply and fix non return valve 150mm dia with by pass arrangement working pressure 10 kg per sq cm confirming to is- 5312 including jointing by means of rubber gasket 3mm thick ms nut bolt washers flanged with joint etc including cost of necessary excavation and earth work testing complete all as specified and directed, all as per item no 4300 above but 100mm dia complete all as specified and directed, taking down old unserviceable sluice valves and supply and fix new sluice valve ci body double 150mm dia flanged and drilled conforming to is-780 of 1980 pn-16 including rubber gasket 3 mm thick stainless steel spindle iron wheel head and suitable size of nuts bolts and washers including cost of necessary excavation and earth work testing complete all as specified, all as per item no 4500 above but sluice valves 100 mm dia complete all as specified and directed, all as per item no 4500 above but sluice valves 80 mm dia complete all as specified and directed, repairs to ci sluice valves 150mm dia by taking down worn out unserviceable gland sleeve check nut spindle gate etc and cleaning the valve by removing all scales and reassembling the valve with new packing nut and bolts complete all as specified and directed, all as per item no 4800 above but 100mm dia complete all as specified and directed, all as per item no 4800 above but 80mm dia complete all as specified and directed, material and labour for construction of block masonary valve pit 075m x 075m x 075m complete with pcc 136 type c1 solid block walling 20cm thick set in cm 14 over 100 mm thick pcc 148 type d2 foundation 50 mm thick pcc 124 type b1 coping on the top of wall rendering 15 mm thick with cm 14 on inside and exposed external surfaces up to 150mm below gl 3 mm thick ms sheet cover angle iron frame with locking arrangment etc including dismantling old existing damaged valve pit complete all as specified and directed, supply and fixing water sprinkler nozzel of fountain made out by stainless steel copper water tube heavy duty 25 mm thick and 60 mm long minium single pointed nozel or muilti nozzel roud in shape with cooper tube heavy duty threading on both end etc all as site required including threading making holes welding cutting joiting fixing etc stay on high pressure etc all as existing complete note quoted rates shall be included cost of required all work to existed replacement such as cutting welding soldering etc all complete all as specified and as directed, labour for disclaring to rusted nozzel of fountain using chemical wire brush re-assembling and assembling incl de-watering cleaning to fountain water storage tank in all capacity removing all slugs dry leafs fungus and wast material and depositing as directed 50 mtrs above the site minium complete all as specified and as directed, m l for every six month bacteriological chemical water testing analysis reports main pump houses including ro plant sample shall be collected by contractor from all sources and testing will be done at jal kal vibhag nagar nigam at govt laboratory and report to be submitted to this office in duplicate copy complete all as specifieds and directed by engineer-in-charge, supply and fixing water sprinkler nozzel of fountain made out by stainless steel aluminium water tube heavy duty 25 mm thick and 600 mm long minium single pointed nozel or muilti nozzel roud in shape with stainless steel aluminium tube heavy duty threading on both end minium 2 feet long etc all as site required including threading making holes welding cutting joiting fixing etc stay on high pressure etc all as existing complete note quoted rates shall be included cost of required all work to existed replacement such as cutting welding soldering etc all complete all as specified and as directed, supply only calcium hypochlorite granules dry chlorine water pruifier chemical for drinking water confirm to iso 9001 14001 8001 certified 65 to 70 chlorine content in granular calcium based granular disinfectant for water treatment packed in plastic drum 45 kg each complete all as specified and directed
AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid
LOADING...
