HomeTendersMilitary Engineer Services TendersElectrical Service Tenders

Latest Electrical Service Tenders in Military Engineer Services-Page 13 of 13

FILTERS

Category: Electrical Service

Organization: Military Engineer Services

640+ Live Electrical Service Tenders in Military Engineer Services 2026

Select All

T247 ID-103976669 |Bid Value:₹ Refer Docs |EMD:₹ 90.00 K |24-09-2026 5 Days Left

corrigendum : repair/rewinding of ceiling, exhaust fans and geysers and repair/maint of cooling appliances incl window/split ac/refrigerator and repair/replacement earthing system incl lightening arrestors at chaf bangalore

Bangalore, Karnataka, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-103987591 |Bid Value:₹ Refer Docs |EMD:₹ 48.00 K |24-09-2026 5 Days Left

repair/ maint of internal electrification, submain wiring, vtpn dbs, spn dbs including welcome maint and day to day maint of smq/omq at mountain shadow area under ge (af) borjhar

Kamrup, Assam, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-103992859 |Bid Value:₹ Refer Docs |EMD:₹ 2.11 Lakh |22-09-2026 3 Days Left

corrigendum : special repair to e and m infrastructure at certain locations at hq tc under ge (af) bangalore

Bangalore, Karnataka, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-103992990 |Bid Value:₹ Refer Docs |EMD:₹ 99.00 K |24-09-2026 5 Days Left

corrigendum : repair and maintenance security street light fitting stand by dg sets timer switch street light panel change over switch earthing and other other connected electrical works at charri camp and dharamshala mil stn under ge palampur

Kangra, Himachal Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-103993042 |Bid Value:₹ Refer Docs |EMD:₹ 96.00 K |24-09-2026 5 Days Left

corrigendum : special repair of lt panels internal wiring fitting lighting and allied em works ground floor of sr wg of bldg no p644 (army public school) under ge (i) gos

Ganjam, Orissa, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104020054 |Bid Value:₹ Refer Docs |EMD:₹ 51.68 K |25-09-2026 6 Days Left

corrigendum : special repair/ replacement of defective inverter, dcdb, acdb, cables and connected items of solar plants at certain locations at ins garuda, naval base kochi

Ernakulam, Kerala, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104038076 |Bid Value:₹ Refer Docs |EMD:₹ 60.00 K |19-09-2026 Ending Today

repair to street security lights alongwith main road and boundary wall at north of railway line under ge missamari

Sonitpur, Assam, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104095181 |Bid Value:₹ Refer Docs |EMD:₹ 99.80 K |28-09-2026 9 Days Left

repair replacement of lt cables network lt breakers and panels feeder pillars earthing and allied works at pxe tech residential area itr tech area chandipur lc areas site a site b and site c at pxe and itr chandipur

Balasore, Orissa, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104095740 |Bid Value:₹ Refer Docs |EMD:₹ 60.00 K |28-09-2026 9 Days Left

repair and maintenance of mes power house sub station and water supply installations electric water supply equipments and lighting protection works and other connected works at alhilal mil station under ge palampur

Kangra, Himachal Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104108358 |Bid Value:₹ Refer Docs |EMD:₹ 40.00 K |28-09-2026 9 Days Left

repair, replacement and maintenance of unserviceable perimeter lights, street lights, cable junction boxes, street light brackets, poles, cables, painting of poles and other misc street lighting works at smq, hq area and mes complex at af stn digaru

Kamrup, Assam, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104130129 |Bid Value:₹ Refer Docs |EMD:₹ 77.66 K |22-09-2026 3 Days Left

corrigendum : special repair of bldg no p 14 tradesman shop of asc sup coy and provision of pathway and lighting for children park of at air force station missamari under ge missamari

Sonitpur, Assam, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104130165 |Bid Value:₹ Refer Docs |EMD:₹ 70.00 K |22-09-2026 3 Days Left

repair to internal wiring including fittings fixtures to jcos and or md accns under ge missamari

Sonitpur, Assam, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104130169 |Bid Value:₹ Refer Docs |EMD:₹ 96.00 K |29-09-2026 10 Days Left

repair/maintenance of internal wiring and other connected works at arde lab under ge (i) rnd pashan, pune

Pune, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104146079 |Bid Value:₹ Refer Docs |EMD:₹ 60.00 K |23-09-2026 4 Days Left

repair to certain misc b/r and e/m work services in mes installation under aor of ge (af) barrackpore.

North 24 Pargana, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104155822 |Bid Value:₹ Refer Docs |EMD:₹ 76.00 K |22-09-2026 3 Days Left

corrigendum : ge/khu-95/2025-26 repair / replacement of security lights of entire khumbathang garrisson in the aor of age e/m under ge khumbathang

Kargil, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104163747 |Bid Value:₹ Refer Docs |EMD:₹ 1.15 Lakh |05-10-2026 16 Days Left

repair to roof treatment and internal electrification of central institute of sfa (jcos/or) in aor of age b/r-i under ge (west) ferozepur cantt

Firozpur, Punjab, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104166281 |Bid Value:₹ Refer Docs |EMD:₹ 96.70 K |28-09-2026 9 Days Left

nit no ge/nd-52/2026-27 - provn of heat retardent paint and addn/ altn to passage, guard room of ncs and provn of wall panelling, false ceiling, tiling and internal wiring of exam room and maths lab and provn of awning to certain locations of ncs at chanakyapuri under ge new

New Delhi, Delhi, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104197608 |Bid Value:₹ Refer Docs |EMD:₹ 1.38 Lakh |06-10-2026 17 Days Left

certain b/r repair in otm/md accn of madras regiment, inf bde camp, ibsc and md accn of s,m and o and internal electrification of otm/md accn in the aor of age b/r-ii under ge(west) ferozepur cantt - certain b/r repair in otm/md accn of madras regiment, inf bde camp, ibsc and md accn of s,m and o and internal electrification of otm/md accn in the aor of age b/r-ii under ge(west) ferozepur cantt

Firozpur, Punjab, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104236142 |Bid Value:₹ Refer Docs |EMD:₹ 70.00 K |30-09-2026 11 Days Left

repair / replacement and maint of transformer, ht external electric supply and ht ug cables at dholewal under ge ludhiana

Firozpur, Punjab, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104251899 |Bid Value:₹ Refer Docs |EMD:₹ 70.00 K |25-09-2026 6 Days Left

corrigendum : repairs to internal wiring including fittings fixtures to various otm accns under ge missamari

Sonitpur, Assam, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104251995 |Bid Value:₹ Refer Docs |EMD:₹ 38.00 K |25-09-2026 6 Days Left

repair replacement and maint of refg desert water coolers ac deep freezer allied items electric wiring with fitting fixture sub main wiring dbs and service connection with earthing central institute stn pool area and offr mess at mil stn dhrangadhra - repair replacement and maint of refg desert water coolers ac deep freezer allied items electric wiring with fitting fixture sub main wiring dbs and service connection with earthing central institute stn pool area and offr mess at mil stn dhrangadhraf

Surendranagar, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104286835 |Bid Value:₹ Refer Docs |EMD:₹ 60.00 K |03-10-2026 14 Days Left

repair / maint of street lights, high/medium mast lights, solar lights, high/low bay flood lights, bldg security, area lighting including its astronomical timer switch and connected works at tech area under afs phalodi

Jodhpur, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104289987 |Bid Value:₹ Refer Docs |EMD:₹ 60.00 K |03-10-2026 14 Days Left

repair/maint of lt cable, lt panel board and its switchgears at technical area under afs phalodi

Jodhpur, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104311375 |Bid Value:₹ Refer Docs |EMD:₹ 10.00 K |26-09-2026 7 Days Left

term contract for electrical works and connected items at stn subathu under ge kasauli

Solan, Himachal Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104343364 |Bid Value:₹ Refer Docs |EMD:₹ 32.54 K |26-09-2026 7 Days Left

provn of ht load break switch at sub-stn no. 02, provn of xlpe ht cable (11000 volts) from logistic to tech gate and provn of chemical earthing pits at air force station kasauli under ge kasauli

Solan, Himachal Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104416818 |Bid Value:₹ Refer Docs |EMD:₹ 70.00 K |06-10-2026 17 Days Left

certain b/r repair and internal electrification to otm/md accn in aor of age b/r-i under ge(west) ferozepur

Firozpur, Punjab, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104480561 |Bid Value:₹ Refer Docs |EMD:₹ 90.00 K |03-10-2026 14 Days Left

repair maint of internal wiring including fittings fixtures and runway lighting at airfield hanger etc at army avn units and maint services for electrical distribution system of md and otm accn at north of rly line under ge missamari

Sonitpur, Assam, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104483760 |Bid Value:₹ Refer Docs |EMD:₹ 75.55 K |10-10-2026 21 Days Left

special repairs for replacement of old/ unserviceable/ faulty electrical wiring with fittings/ fixtures/ light fittings/ fans/ dbs including connected works at trinity officers mess complex at chaf banglaore

Bangalore, Karnataka, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104381365 |Bid Value:₹ 90.00 Lakh |EMD:₹ 1.60 Lakh |17-10-2026 28 Days Left

repair/maintenance of 33 /11 kv ht, sub station including calibration /testing of 33/11 kv transformers, vcbs, ht switch gear lighting arrestors and other connected works under ge babina

Jhansi, Uttar Pradesh, India

Matching BOQ Items

dehydration of tranformer oil obtained from transformersvoltage stabilizer etc dielectric strength shall not be less than 50 kv in 25 mm gap electrode after dehydration dehydration of transformer shall be carried out by using electrically operated dehydration machine complete all as specified and as directed note- i centrifuging machine with all tp testing machine of oil required for dehydration shall be arranged by the contractor ii oil required for topping up the transformer will be measured paid separately, supply only ehv transformer oil as per is 335 of 1983 is 1866-2000 for topping up of transformer oil in existing position having dielectric strength not less than 50 kv in 25 mm gap electrode complete all as specified and as directed make -power oilsavitaservo, supply fix and testing in repair wti with 3 mtr capillary lengths as per sample complete all as specified and as directed, supply fix and testing in repair oti with 3 mtr capillary lengths as per complete all as specified and as directed, s f in repair breather assembly for transformer of capacity 5 mva complete all as specified and as directed, supply only silica gel of superior quality of 5 to 10 mm grade complete all as specified and as directed, ml for surface dressing averaging 15 cm depth in softloose soil for cleaning and cuttingremoval of green vegetation in and around the installations and removal of the soil outside of the installation including spreading thin layer of anti vegetation chemical to prevent abnormal growth of grassbushes complete all as specified and as directed, material and labour for preparation of old rusted steel surfaces of ht swaged poles of 11m length and applying one coat of synthetic enamel paint up to 12 meter height as per the existing pattern above the pcc coping and one coat of aluminium paint beyond 12 meter height for the rest portion including cross arms brackets and re-writing pole numbers and cutting vegetation growth all around and on the poles up to 1 metre radius complete including replacement of self adhesive fluorescent colour tape as per existing pattern and size complete all as specified and as directed, ditto all as per item no 08 above but ht 4-pole structure complete all as specified and as directed, ditto all as per item no 08 above but ht 2-pole structure complete all as specified and as directed, s f steel tubular swaged pole with cast iron base plate finial tapper plug bolts nuts and screws type 410 sp-55 1100 m long including two coats of aluminium paints over one coat of red oxide primer on external exposed surfaces and two coats of black bituminous paint on portion embedded in concrete in internal surfaces of pole as in repairs complete all as specified and as directed, excavation in trenches not exceeding 15 m in deep not exceeding 15 m wide and getting out in soft loose soil including leveling and ramming complete all as specified and as directed, excavation in trenches not exceeding 15 m in deep not exceeding 3 m wide and getting out in soft loose soil including leveling and ramming complete all as specified and as directed, returning refilling in trenches exvcavated soils including spreading leveling well ramming in layers not exceeding 25 cm thick complete all as specified and as directed, removal of excavated surplus soil to a distance nexceeding 50 m and depositing where directed at a level not exceeding 15 metre above the starting point complete all as specified and as directed, m l pcc 136 type c2 using 40 mm graded crushed stone aggregates as in foundation of poles filling and mass concrete complete all as specified and as directed, m l pcc 124 type b2 using 40 mm graded crushed stone aggregates as in coping of poles filling and mass concrete complete all as specified and as directed, ml clean dry river sand in trenches ducts for cushioning to cable 8 cm below the cable and 15 cm above the cable and measured only 18cm thick sand paid complete all as specified and as directed, supplying laying jointing testing 185 sqmm x 3 core xlpe insulated pvc sheathed armoured ht cable 33000 volts grade heavy duty with aluminium conductor laid in trenchespipefixed on the wall etc complete all as specified and as directed, supplying laying jointing testing 185 sqmm x 3 core xlpe insulated pvc sheathed armoured ht cable 11000 volts grade heavy duty with aluminium conductor laid in trenchespipefixed on the wall etc complete all as specified and as directed, supplying laying jointing testing 120 sqmm x 3 core xlpe insulated pvc sheathed armoured ht cable 11000 volts grade heavy duty with aluminium conductor laid in trenchespipefixed on the wall etc complete all as specified and as directed, supplying laying jointing testing 95 sqmm x 3 core xlpe insulated pvc sheathed armoured ht cable 11000 volts grade heavy duty with aluminium conductor laid in trenchespipefixed on the wall etc complete all as specified and as directed, supply and laying un-reinforced precast concrete cable class hv type -i flat size 300mm x180mmx40mm complete all as specified and as directed, m l for road cutting including excavation in trenches for laying ht ug cable in pipe not exc 45 cm wide and nexc 60 cm depth or as per site requirement for laying of gi pipe making good the disturbed surfaces with cement concrete 136 type c-1 and top surface neatly finished as per existing to match with the existing complete all as specified note - gi pipe light grade will be paid and measured under separate item the cut excavated surface will be repaired on same day with pcc failing which a penality of rs 500 per day will be recovered from contractor dues, sf steel tubes light grade galvanised with all fitting laid in trenches fixed to wall and floor of 150 mm dia bore for cable protection complete all as specified and as directed, sf steel tubes light grade galvanised with all fitting laid in trenches fixed to wall and floor of 100mm dia bore for cable protection complete all as specified and as directed, s f heat shrink end termination outdoor type cable jointing kit for 11kv ht xlpe cable of size 95 sqmm 3 core complete with jointing material and accessories complete all as specified, s f heat shrink end termination outdoor type cable jointing kit for 11kv ht xlpe cable of size 120 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, s f heat shrink end termination outdoor type cable jointing kit for 11kv ht xlpe cable of size 185 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, s f heat shrink end termination indoor type cable jointing kit for 11kv ht xlpe cable of size 95 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, s f heat shrink end termination indoor type cable jointing kit for 11kv ht xlpe cable of size 120 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, s f heat shrink end termination indoor type cable jointing kit for 11kv ht xlpe cable of size 185 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, s f heat shrink end termination outdoor type cable jointing kit for 33 kv ht xlpe cable of size 185 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, s f in repair heat shrink straight through type cable jointing kit for 33 kv ht xlpe cable of size 120 sqmm to 185 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, s f in repair heat shrink straight through type cable jointing kit for 11 kv ht xlpe cable of size 120 sqmm to 185 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, s f in repair heat shrink straight through type cable jointing kit for 11 kv ht xlpe cable of size 95 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, ml in repair earthing complete with galvanised steel earth plate 600x600x6mm thick buried directly in ground earth pit not less than 40 mtr deep below ground level with top edge of the plate not less than 325meters below normal ground level connected to galvanised iron strip 32 x 6mm as earthing lead by means of bolts nuts check-nuts and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work gi pipe light grade 40 mm bore for protection of gi strip from earth electrode to and including the earth test point of galvanised ironsteel of size 75x75x 25mm supplying and laying charcoal dust common salt pcc 124 type b1 chamber and ms angle iron frame 40x40x6 cm and rcc cover 40mm thick 124 type b1 using 20mm graded stone aggregate reinforced with 6 mm dia round bars 75mm cc both ways with ms handle 12mm dia pgi funnel and wire mesh 20 mm dia gi pipe light grade for watering all as shown in drawing and connected to earth test point including testing complete all as specified and as directed, material and labour for repairreplacement of earth pit including using pcc 136 type c-1 precast rcc 1153 type a-1 cover slab of size 40x40x 6 cm reinforced with 8mm dia tmt bars 150mm cc both ways with one handle for lifting made out of 8mm dia ms bar embeded in precast cover slab including necessary excavation and earth work in any type of soil complete all as specified and as directed, ml for pin type porcelain white brown or green insulator including one galvanised mild steel spindle two galvanised iron washers and one one galvanised iron nut suitable for 33 kv grade complete all as specified and as directed, ml for disc type string of 3 disc insulator porcelain white brown or green insulator suitable for 33 kv grade complete all as specified and as directed, sf in repair pin type insulator polymer with hardware fittings grey brown or green suitable for 11000 volts grade complete all as specified and as directed, sf in repair disc type insulator polymer with hardware fittings grey brown or green suitable for 11000 volts grade complete all as specified and as directed, ml cross arms bracing supports clamps and back plates fabricated from structual steel sections including nuts bolts washers welding bending cold or hot drilling holes for bolts in any shape or size as indicted and inclusive of one primer coat one under coat and two finishing coat of aluminium paint complete all as specified and as directed, supply and fixing in repair new aluminium conductor steel reinforced acsr of any sizetype stringing and jointing on poles including providing binding wire etc complete all as specified and as directed, supply an fixing danger notice plate of 16mm thick mild steel sheet vitreous enamelled white with letters figures and conventional skull and bones in signal red colour and fixed with msclamps bolts and nuts of approved size for 33 kv ht 25x20cm size complete all as specified and as directed, supply an fixing danger notice plate of 16mm thick mild steel sheet vitreous enamelled white with letters figures and conventional skull and bones in signal red colour and fixed with msclamps bolts and nuts of approved size for 11 kv ht 25x20cm size complete all as specified and as directed, supply and fix in replacement d o drop out fuse unit double stack channel type 3 pole 33 kv channel mounted complete all as specified and as directed, supply and fix in repair polymer type air break switch gang operated triple pole mechanically operated mounted on insulator and steel frame with operating mechanism worked from ground level for current rating upto 400 amps and working pressure 11000 volts with drop out type fuses set 12 insulators three numbers of 400 amp capacity complete including dismentling air break gang operated switches verticalhorizontal mounted including insulator hand operating mechanism for replacement of brokenworn out components and insulators etc all as specified and directed, supply and fixing in repair triple pole double break central rotating banging type isolator horizontal mounting current rating up to 600 amps for 33 kv including post insulators accessories as per existing complete all as specified and as directed, ml for removing and taking out old stone aggreated any size clear all surface their after laying single layer of sand dust in 33 kv mrs yard 11 kv distribution sub station and before laying stone aggregate complete yard including spreading of anti vegetation chemical to prevent abnormal growth of grassbushes complete all as specified and as directed, ml for spreading and levelling evenly 40 mm graded stone aggregated at 33kv main receiving station 11 kv sub station complete all as specified and as directed, material and labour for laying trench cover on cable trenches as per existing at 33 kv11 kv mrs ward made out of rcc 124 type b0 125mm graded stone aggregate, ml lightning arresters expulsion type complete with all fittings transmission class discharge capacity 65 kilo amp suitable for 11000 volt complete all as specified and as directed, ml lightning arresters expulsion type complete with all fittings transmission class discharge capacity 65 kilo amp suitable for 33000 volt complete all as specified and as directed, material labour in repair of polymer lighting arrester high tension expluive type complete with all fitting transmission class diescharge capacity 65 kilo amp suitable for 11000 volts complete all as specified and as directed, supply fix testing current transformer ct of 33 kv single phase out door oil cooled ct ratio 100505 amps dual core - one for metering and other for protection having 16 va burdon and class 5p-10 protection and 05 metering complete all as specified and as directed, supply fix testing potential transformer pt of 33 kv single phase outdoor oil cooled pt ratio 33000v3110v3v class 10 having 100 va burdon complete all as specified and as directed, supply fix testing pt protection transformer for 11 kv indoor vcb draw out type 11 kv 11000110 v va-5 class 1 rated friquency 50 hz make- cgl approved vendor all as directed note- complete above said work will be carried out through authorised rep of cg, ml for structural ms frame work half round or other stock section including securing posts and stuts in fencing frame work for gates of substations base frame for equipments including securing bolts posts and struts in fencing including cutting and making shapes as desired drilled holes notching for wire etc flat iron fillets for securing wire mesh etc including all necessary drilled bolting or riveting etc and similar work confirming to fe-290 gde e-165 complete all as specified and as directed, sf mild steel screw boltmechine made with hexagonal or square head nexc 5cm but nexc 10 cm dia complete all as specified and as directed, ml for prepration of steel surface of one coat of red oxide and two coat of synthetic enamel paint any description n exc 10 cm in width or grith when unconnected with other painting or when painted in a different complete all as specified and as directed, attending the testing by authorised rep of oem of vcb for attending of servicing overhauling of 11 kv indoor vcb panel including breaker cgabbjyoti make at 3311 kv mrs at ge babina station and including following, supply only led indicating lamps any colour redyellowgreenblue universal voltage for vcb 11 kv of 630400 amps all as per sample complete all as specified and as directed, supply only trip circuit healthy push button with no contacts suitable for vcb 11000 volt of 630 400 amps all as per sample complete all as specified and as directed, supply only spring charging motor 230vac dc suitable for vcb 11000 volt of 630400 amps all as per sample complete all as specified and as directed, supply only limit switch suitable for vcb 11000 volt of 630 400 amps all as per sample complete all as specified and as directed, supply only microswitch assembly suitable for vcb 11000 volt of 630 400 amps all as per sample complete all as specified and as directed, supply only big gear assembly suitable for vcb 11000 volt of 630400 amps all as per sample complete all as specified and as directed, supply only small gear assembly suitable for vcb 11000 volt of 630 400 amps all as per sample complete all as specified and as directed, supply only tripping shaft assembly suitable for vcb 11000 volt of 630 400 amps all as per sample and complete all as specified and as directed, supply only closing shaft assembly suitable for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only segment gear assembly suitable for vcb 11000 volt of 630 400 amps all as per sample and complete all as specified and as directed, supply only pt fuse for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only spring charging handle for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only breaker control switch 4 passion for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only ctepoxy type ratio 300-15055a core 115 vaci05 core 2 15 vacl5p10 stc 263 ka 1 sec for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only ctepoxy type ratio 100-5055a core 115 vaci05 core 2 15 vacl5p10 stc 263 ka 1 sec for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only closing coil assembly 30vdc for vcb 11000 volt of 630400 amps all as per sample complete all as specified and as directed, supply only tripping coil assembly 30vdc for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only closing coil assembly 110vdc for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only tripping coil assembly 110vdc for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only plug sockect for vcb 11000 volt of 630400 amps as per sample and complete all as specified and as directed, supply only 8no8nc auxiliary switch for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only space heater 10080w for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only thermostat for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only hrc control fuse 2a 4a 6a 10a for vcb 11000 volt of 630400 amps all as per sample complete all as specified and as directed, supply only complete breaker mechanism assembly for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only onoff push button plate assembly for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only fuse base with carrier up to 32 a for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only timer for vcb 11000 volt of 630400 amps all as per sample complete all as specified and as directed, supply only anti pumping device for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only relay ammeter voltmeter fixing plates with powder coating paint siemens gray rl7032 for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only door knob for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only trip catch assembly for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only set of 06 sleeve for poles for vcb 11000 volt of 630400 amps all as per sample complete all as specified and as directed, supply only set of 06 isolating contacts for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only set of 03 vaccum intrruptor supporting insulators for vcb 11000 volt of 630400 amps all as per sample complete all as specified and as directed, supply only tcs auxiliary relay 24vdc for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed make- lt, supply only auxiliary switch 5 no5 nc for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed make- lt, supply only closing coil 30vdc for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only lugs ferules cable teis saddle base 12 sqmm 25 sqmm for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only hooter for vcb 11000 volt of 630400 amps all as per sample complete all as specified and as directed, supply only crc spray bottle for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only epoxy paint for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only 15 multistrandad flexible copper cable 1100v grey colour control wiring for vcb 11000 volt complete all as specified and as directed, ml for spring charging motor modification works under vcb 11000 volt of 630400 complete all as specified and as directed note- complete modification work will be carried out through authorised rep of cg, ml for modification works under vcb 11000 volt of 630400 to compatable new vcb trolly with existing vcb panel complete all as specified and as directed note- complete modification work will be carried out through authorised rep of cg, ml for modification fabrication work connection of 11 kv copper bus bar of suitable size suitable lenght as per menufacturer recommendations under vcb 11000 volt of 630400 including copper busbar its jointing and cover with reycam sleeves in existing vcb panel complete all as specified and as directed note- complete modification work will be carried out through authorised rep of cg, attending the testing by authorised rep of cg for servicingoverhauling of 11 kv rmu 4 way 6way 8way of make- lucyabbmegawin at differenet location under ge babina station complete all as specified and as directed for following, attending the testing by authorised rep of cg for servicingoverhauling of 33 kv cg abb areva make outdoor sf6vcb breakers at 3311 kv mrs at ge babina station all as specified and directed for following, supply only ratchet wheel assembly for 33kv vcb 1250 amp 25 ka as per existing sample complete all as specified and as directed, supply only closing latch assembly for 33kv vcbsf-6 breaker 1250630400 amp 263 ka as per existing sample complete all as specified and as directed, supply only tripping latch assembly for 33kv vcbsf-6 breaker 1250630400 amp 263 ka as per existing sample complete all as specified and as directed, supply only set up o ring for pole for 33kv vcbsf-6 breaker 1250630400 amp 263 ka as per existing sample complete all as specified and as directed, supply only dc auxiliary 30v dc contactor for 33kv vcb 1250630400 amp as per existing sample complete all as specified and as directed, supply only motor contactor 30v dc for 33kv vcb 1250630400 amp 263 ka as per existing sample complete all as specified and as directed, supply only limit switch for 33kv vcb 1250630400 amp as per existing sample complete all as specified and as directed, supply only closing coil assembly 30 v dc for 33kv vcb 1250630400 amp as per existing sample complete all as specified and as directed, supply only tripping coil assembly 30 v dc for 33kv vcb 1250 630400 amp as per existing sample complete all as specified and as directed, supply only spring charging motor 230 vacdc for 33kv vcb 1250630400 amp as per existing sample complete all as specified and as directed, supply only spring charging gear assembly for 33kv vcb 1250630400 amp as per existing sample complete all as specified and as directed, supply only small gear assembly for 33kv vcb 1250630400 amp as per existing sample complete all as specified and as directed, supply only anti pumping device for 33 kv vcb 1250 630400 amps all as per existing sample complete all as specified and as directed, supply only complete pole assembly 33 kv outdoor type all as per existing sample complete all as specified and as directed, supply only breaker charging complete mechanism 33 kv outdoor type all as per existing sample complete all as specified and as directed, testing of outdoor ct pt connection marshaling box with tbs channels for 33 kv vcb control connection complete all as specified and as directed, supply fixing installation and testing in repair power pack unit for battery backup 230 vac 30 vdc suitable for existing cgabb make indoor vcb panel as recommanded by oem complete all as specified and as directed, supply fixing installation and testing in repair power pack unit for battery backup 230 vac 110 vdc suitable for existing cgabb make indoor vcb panel as recommanded by oem complete all as specified and as directed, supply fixing installation and testing in repair 3 phase over current 01 earth fault relay in existing 11 kv indoor vcb panel with high set with idmt and inst characteristics having aux supply v of 20-110v dc rated volt 250 vac 30 or 110 vdc universal wide range as per site requirement complete all as specified and as directed make- cg model - cg14n or equevalent of abb seimens schneider note- i all necessary arrangement for fixingaccommodate new relays in exisitng 11 kv vcb panel including cuttingcasing control wiring will be included in quoated rate ii complete fixing installation and testing work of relay will be carried out through authorised rep of cg, supply fixing installation and testing in repair 3 phase over current 01 earth fault relay in existing 11 kv indoor vcb panel with high set with idmt and inst characteristics having aux supply v of 24 to 240 v acdc rated volt 250 vac 30 or 110 vdc universal wide range as per site requirement complete make- lt model - mc61a-nx cat no mc61anx4000 or equevalent of abb seimens schneider note- i all necessary arrangement for fixingaccommodate new relays in exisitng 11 kv vcb panel including cuttingcasing control wiring will be included in quoated rate ii complete fixing installation and testing work of relay will be carried out through authorised rep of cg, supply fixing installation and testing in repair rej601 feeder protection inrush current relay abb make in existing 33 kv and 11 kv indoor vcb panel with over current short circuit earth fault inrush current instantaneous protection features ct secondary 1 a 5a universal wide range auxiliary voltage universal acdc wide range site selectable range make- abb model rej601 or equevalent of seimens schneider note- i all necessary arrangement for fixingaccommodate new relays in exisitng 11 kv vcb panel including cuttingcasing control wiring will be included in quoated rate ii complete fixing installation and testing work of relay will be carried out through authorised rep of cg, supply fixing installation and testing in repair aegis a131d1 feeder protection inrush current relay cg make in existing 33 kv and 11 kv indoor vcb panel with over current short circuit earth fault inrush current instantaneous protection features ct secondary 1 a 5a universal wide range auxiliary voltage universal acdc wide range site selectable range make- cg model no aegis a131d1 or equevalent of abb seimens schneider note- i all necessary arrangement for fixingaccommodate new relays in exisitng 11 kv vcb panel including cuttingcasing control wiring will be included in quoated rate ii complete fixing installation and testing work of relay will be carried out through authorised rep of cg, supply fixing installation and testing in repair wtioti alarm relay for transfomer protection in existing 33 kv control panel as sample complete all as specified and as directed make- cg cs abb seimens schneider note- i all necessary arrangement for fixingaccommodate new relays in exisitng 11 kv vcb panel including cuttingcasing control wiring will be included in quoated rate ii complete fixing installation and testing work of relay will be carried out through authorised rep of cg, supply fixing installation and testing in repair wtioti trip relay for transfomer protection in existing 33 kv control panel as sample complete all as specified and as directed make- cg cs abb seimens schneider note- i all necessary arrangement for fixingaccommodate new relays in exisitng 11 kv vcb panel including cuttingcasing control wiring will be included in quoated rate ii complete fixing installation and testing work of relay will be carried out through authorised rep of cg, supply fixing installation and testing in repair 86 master trip relay in existing 33 kv or 11 kv indoor vcb control panel with 30 vdc complete all as specified and as directed make- cs cg abb seimens schneider note- i all necessary arrangement for fixingaccommodate new relays in exisitng 11 kv vcb panel including cuttingcasing control wiring will be included in quoated rate ii complete fixing installation and testing work of relay will be carried out through authorised rep of cg, attending and testing by service engineer to carry out priodical on site testing of 3311kv 02 nos 5 mva 01 nos 125 mva transformer by authorised agency at 3311 kv mrs at ge babina station are as under - a ir value test b ratio test c magnetic core balance test d open circuit test e vector group test f short circuit test g no load current test note- a all necessary arrangement at the site of testing quipment for the testing will be responsibility of the contractor and rate for the same will be included in quoated rate b after the testing of transformer test report will be submitted to the department necessary recommandation suggestion also be mentioned in report if any, sf in repairreplacement voltmeter digital type with selector switch of size 96x96mm 01 phase rating complete all as specified and as directed make- elmeasure conzervelt, sf in repairreplacement voltmeter digital type with selector switch of size 96x50mm 3 phase 03 wire rating complete all as specified and as directed make- elmeasure conzervelt, sf in repair replacement ammeter digital type with selector switch of size 96 x 96 mm 01 phase rating complete all as specified and as directed make- elmeasure conzervelt, sf in repair repalcment ammeter digital type with selector switch of size 96 x 50 mm 3 phase 3 wire rating complete all as specified and as directed make- elmeasure conzervelt, sf in repair replacement multifunctional meter of size 96 x 96 mm rating complete all as specified and as directed make- elmeasure conzervelt, supply fixed installed and testing in repair replacement em7230 demand controller cl 10 rs485 in existing 11 kv indoor vcb panel complete all as specified and as directed make- schneiderltabb, sf in repair breaker control switch trip-neutral-close tnc with 2no 2nc spr rtn for 33 kv control panel cat part no 72009 lt, ml earth continuity conductor or main earthing lead 32 x 6 mm galvanized iron strip fixed to wall on batten or recess or chases or burried in ground or drawn in conduit pipe or fixed to poles or any other indicated situation for loop earthing etc complete all as specified and as directed, ml framed work as in doors or gates of angle or other section with gusset plates rails braces etc complete drilled for fixing of steel heeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering running rails and guides and hanging also fastening and fixing complete fe 410 wgde e-250 complete all as specified and as directed, sf in repair repalcement for led glow sign board of size 12m x 2m made out acrylic sheet 3 mm dia with acp sheet in front of it placed covered with cgi in all side 26 gauge sheet with led modular lights inside duly complete including fixed on suitable steel pole and with suitable supporting frame or fixed on wall and fixing arrangement lighting connection with suitable copper wire complete all as specified and as directed, sf in repair repalcement for led glow sign board of size 12m x 3m made out acrylic sheet 3 mm dia with acp sheet in front of it placed covered with cgi in all side 26 gauge sheet with led modular lights inside duly complete including fixed on suitable steel pole and with suitable supporting frame or fixed on wall and fixing arrangement lighting connection with suitable copper wire complete all as specified and as directed, sf in repair repalcement for led glow sign board of size 15m x 3m made out acrylic sheet 3 mm dia with acp sheet in front of it placed covered with cgi in all side 26 gauge sheet with led modular lights inside duly complete including fixed on suitable steel pole and with suitable supporting frame or fixed on wall and fixing arrangement lighting connection with suitable copper wire complete all as specified and as directed, sf in repair repalcement for led glow sign board of size 15m x 4m made out acrylic sheet 3 mm dia with acp sheet in front of it placed covered with cgi in all side 26 gauge sheet with led modular lights inside duly complete including fixed on suitable steel pole and with suitable supporting frame or fixed on wall and fixing arrangement lighting connection with suitable copper wire complete all as specified and as directed, sf in repair repalcement for led glow sign board of size 6m x 07m made out acrylic sheet 3 mm dia with acp sheet in front of it placed covered with cgi in all side 26 gauge sheet with led modular lights inside duly complete including fixed on suitable steel pole and with suitable supporting frame or fixed on wall and fixing arrangement lighting connection with suitable copper wire complete all as specified and as directed, sf retro reflective sign board made up with 12 mm thick stainless steel sheet of which both sides shall be fully covered with high intensity prismatic hip retro reflecting sheeting of approved specification asper morth having approved message matter and base fully processed by pressure sensitive equipment of approval brand avery dennison3 m fixed hanging on sub station fencing on stainless steel frame makeup of ss as described complete all as specified and as directed, material and labour for repairmaint of trolly of trolly mounted transformer including oiling greasing of moving parts checking repairing make fuctional of punture tyre of trolly and painting of complete trolly with synthetic enamel paint with existing pattern or as directed after cleaing of oily surface of trolly complete all as specified and as directed, material and labour for preparation of old rusted steel surfaces of complete 33 kv yard including ht 2 pole 4 pole structure of 11m length out door ctpt steel structure outdoor vcb steel structure islolator do fuse structure etcas per the existing pattern above the pcc coping with two coat of aluminium paint on complete steel structure and pcc coping painted by applying one coat of synthetic enamel paint complete all as specified and as directed, 12 core 25 sqmm, 6 core 25 sqmm, 4 core 25 sqmm, supply and fix in replecemnet of automatic fcbc and trickle battery charger cum tripping unit 30 vdc 165 ah for 33 kv and 11 kv protection equipment with comprising of following- electrical specification a ac input voltage 230 v range 180v to 264 v b ac input frequency normal 50 hz - 3 hz c dc output volt normal for load 30vdc d 20 amps total current output capacity battery type- a lead acidsmfvlrs b indications for mains supply float charging boost charging ac volt meter dc volt meter dc fail ac fail alarm dc amp meter for load dc amp meter for charging protection- a circuit breaker for mains incoming supply circuit breaker for output load over load protection ac short circuit protection battery reverse polarity low high volatage protection housing and enclosure- a heavy duty sheet steel enclosure finished with powder coated paint floor mounted operation a automannual control cccv close loop rectifier full wave half controlled bridge element fuse protection for rectifier element fuse failsure relay dc earth fault relay alarm annunciation dual float charger option note- i the internal control wiring of battery charger should ber carried out by susing suitable size of multistranded frls copper conductor cable with lugs ii all necessary connection battery bank to vcbs should be carried out by using suitable size of copper wire complete, s f in repair of vrla battery bank 30v 02 v x 15 nos cell 100 ah 02 v with vrla battery rack including connection with necessary suitable copper cable or bus bar strip complete all as specified and as directed make - exideamronluminous, testing of earth resistance of existing earth pit as and when required as per is 3043 1987 ssr part-i para 19146 using earth resistance testing equipments as directed and producing the test result for recording purpose complete all as specified and as directed note - 1the contractor shall be asked to carry out the earth test as completely 2 testing of each earth pit shall be measured as one unit 3all test result to be entered in a register properly bound and covered and to be submitted to the engr-in-charge during payment 4 for the purpose of testing contractor shall supply all equipments and apparatusinstruments at his own cost without any extra claim, testing of battery of existing battery bank and battery charger as and when required using testing equipments if required changing of terminals greasing of terminals and pouring of distilled water as directed and producing the test result for recording purpose complete all as specified and as directed by the engr in charge note 1the contractor shall be asked to carry out the battery test as completely 2 testing of all battery in the battery bank shall be measured as one unit 3 all test result to be entered in a register properly bound and covered and to be submitted to the engr-in-charge during payment 4 for the purpose of testing contractor shall supply all equipments and apparatusinstruments at his own cost without any extra claim, testing repairing and making functional of existing 11 kv ht capacitor bank make abb including all necessary spare parts of capacitor as required for making functional of ht capacitor bank complete all as specified and as directed note- i reparing work of ht capacitor bank will be carried out through authorised and specialised agency of similar field ii submit the test report to department before starting and after completion of repair work with functioning of ht capacitor bank and submit their recommendations if any for further improvement of the system iii 11 kv ht capacitor if required for replacement shall be measured and paid separately under respective item of schedule here in after as supply only, supply only do fuse elementwire suitable for 33 kv 5 to 100 amp, supply only do fuse elementwire suitable for 11 kv 5 to 200 amp, s f abc power portable wheeled extinguishers with class a b c and electically started fires packed with 50 and 90 map concentration state of the art pressure gauge quick powerful and reliable fire fighting system with 25 kg ms sp red make cease fire cat part no cf-001167 or equivalent to other make complete all as specified and as directed, s f abc power portable wheeled extinguishers with class a b c and electically started fires packed with 50 and 90 map concentration state of the art pressure gauge quick powerful and reliable fire fighting system with 50 kg ms sp red make cease fire cat part no cf-001167 or equivalent to other make complete all as specified and as directed, s f power portable class ceasefire multimax state of the art pressure gauge quick powerful and reliable fire fighting system with 09kg make cease fire or equivalent to other make complete all as specified and as directed, refilling of dry chemical powder extinguisher stored pressure type with change of nozzle pipe pressure gauge 09 kg complete all as specified and as directed

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-103552512 |Bid Value:₹ 76.74 Lakh |EMD:₹ 1.40 Lakh |02-10-2026 13 Days Left

corrigendum : special repair / replacement of ht ug cable from mh power house to defence colony at mh and installation of medical gas pipe lines to family ward ii, medical ward and surg ward at mh under ge stm chennai

Kanchipuram, Tamil Nadu, India

Matching BOQ Items

earthwork excavation in trenches not exceeding 15 m wide and not exceeding 15 m depth and getting out in soft loose soil for laying cables pipes erection of poles etc complete all as specified and as directed note- excavation shall be carried out manually at certain places wherever directed by the engineer-in-charge at site to avoid breakage of existing electrical water connections quoted rate shall deemed to be include for the manual excavation and nothing extra shall be paid, removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 15m above the starting point complete all as specified and as directed, returning filling in soil including spreading levelling watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed, ml for burnt bricks sub class b old size laid in trenches with equal to length of bricks across the cable for cable protection all as specified and as directed, ml for fine sieved excavated dry soil laid to the required width of trench at bottom and top of cable as cushioning to cable complete all as specified note - thickness shall be measured after punning, supply and lay ht cable xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cables heavy duty 11000 volts grade earthed cable with stranded aluminium conductor cable of size 3 core x120 sqmm complete all as directed note a ht cable route indicator shall be provided at site and quoted rate shall deemed to be included in the quoted rate b the routine tests and acceptance tests as per is 7098 part ii shall be carried out at factory premises and contractor shall submit the test report alongwith paid vouchers and quoted rates shall deemed to be include for the same, supply and lay gi tubes light grade galvanised with all fittings of bore of tube 100mm laid in trenches for drawing cables under roaddrain crossings etc all as specified and directed, ml for making bore hole under the road in any type of soil through trenchless technology by hdd horizontal direction drilling method including preparing and setting up the plant and equipment preparing new pipecable laying work like excavation shoring strutting etc drilling stringing reaming pulling back the new work on the path alignment proper disposal of drilling fluid and the ground penetrating radar survey to protect existing utilities at the pipecable installation location restoration of site after completion all inclusive as per and stt is no 23 22 22 second edition 2008 code of practice of trenchless technology suiting indian condition for making horizontal bore size of 250mm dia suitable for hdpe pipe insertion under the road crossing hard standing including hdpe pipe of size 200 mm nominal dia 2830 mm minimum wall thickness of grade pe 80 16 kgcm2 for protection of ms pipecable to any depth complete all as specified and directed, sf cable jointing kit for 11 kv earthed grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminium conductor cable of size 120 sqmm complete all as specified and directed, sf cable jointing kit for 11 kv earthed grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminium conductor cable of size 120 sqmm complete all as specified and directed, sf cable jointing kit for 11 kv earthed grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminium conductor cable of size 120 sqmm complete all as specified and directed, supply and laying medical gas pipe line oxygen air vacuum made out of copper tubing with 090mm thickness and 15 mm outer dia including different colour code oxygen-yellow air-blue with white colour brand vacuum - blue with black colour brand parallelly drawn fixed on existing wallrooffloor trenches with and including necessary drilling saddling fixing accessories as required for fixing pipe line complete and making good the disturbed surfaces of wall complete all as specified and directed by engineer-in-charge make max flow or other equivalent make approved by cwe note i quoted rate shall inclusive for cutting insertion of necessary t for making new pipe line branches from the existing main source pipes of mh buildings all as specified and directed by engineer-in-charge, s f chromium plated isolation valves minimum working pressure rating of pn 16 or higher to easily safely handle medical gas distribution pressures including necessary testing for leakahes etc complete all as specified and as directed note 3 nos of valve for each ward make conex or other equivalent make approved by cwe, s f din outlets comply with din 13260-2 and en iso 9170-1 iso 9170-1 including necessary testing complete all as specified and as directed note 87 nos of din outlets for each ward make u-metg-flow or other equivalent make approved by cwe

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104166265 |Bid Value:₹ 49.00 Lakh |EMD:₹ 98.00 K |30-09-2026 11 Days Left

corrigendum : ge elect/token-43/2026-2027 - repair /maint of vcb s rmus distribution transformers ht electrical distribution system including repair calibration of relays meters and other allied works at nsb iii panchwati 1 5 gr dcn palam tigris 69 med regt 512 lt ad

New Delhi, Delhi, India

Matching BOQ Items

ml for disconnecting carefully electrical connection from both ht lt primary secondary sides of the transformer keeping them at safe side and taking out the transformervoltage stabiliser indoor outdoor type of capacity 630 kva to 800 kva 11 kv433kv step down any make for carrying out complete overhauling which shall comprise of the following- a ml for lifting transporting handling the transformer to workshop and back to the original location after complete overhauling or one location to another location where required b conducting the tests on core and windings as per is like ratio magnetic imbalance short circuit etc in presence of engr-in-charge and test results shall be signed both by the contractor and engineer -in-charge and kept on record note- i any damage to insulators bushes windings etc while in the custody of the contractor shall be made good at no extra cost to department the serviceability of the transformer shall be checked and confirmed by the contractor before taking into his custody ii ml for rewinding re-insulation of ht lt primary secondary coils bushes studs transformer oil cable box replacement of bucholtz relay mog if any etc will be measured and paid separately, all as per item no 1 herein before but transformervoltage stabiliser indoor outdoor type of capacity up to 400 kva to 500 kva complete all as specified and directed by engr-in-charge, all as per item no 1 herein before but transformervoltage stabiliser indoor outdoor type of capacity up to 100 kva to 315 kva complete all as specified and directed by engr-in-charge, ml for filtration of transformer oil of transformersservo voltage stabilizer installed at various locations to achieve di-electric strength not less than 60 kv at 25mm gap as per relevant is with portable filtration plant testing of the oil for the di-electric strength before filtration and after filtration complete all as specified and directed by engr-in-charge, supply and topping up of transformer oil with di-electric strength not less than 60 kv in to the conservator tank body tank of the transformersservo voltage stabilizer etc at various locations complete all as specified and directed by engr-in-charge make power oil transol sabitha chemicals as approved by ge, ml for rewinding of distribution transformersavr of capacity 100 kva to 800 kva type by winding the low insulationdefective coils of primary coil ht coil with new copper wire as per is of same gauge and existing size together with new insulated materials bracings before placing in to the transformer and assembling the coil with new insulation and fitting the coils in the chamber testing and commissioning the transformer and recording the test results complete all as specified and directed by engr-in-charge note ml for re-insulation of serviceable coils will be measured paid separately under relevant items, ml for rewinding of distribution transformers of capacity 100 kva to 800 kva type by winding the low insulated defective coils of secondary coil lt coil with new copper wire as per is of same gauge and existing size together with new insulated materials bracings before placing in to the transformer and assembling the coil with new insulation and fitting the coils in the chamber testing and commissioning the transformer and recording the test results complete all as specified and directed by engr-in-charge note ml for re-insulation of serviceable coils will be measured paid separately under relevant items, ml for re-insulating windings of distribution transformers of capacity 100 kva to 800 kva size type by strip opening of ht lt coils ie primary secondary coils from core assembly safely unwinding the ht lt coils ie primary secondary coils complete removing the old defective insulation paper and replacing with new dpc insulation to the copper conductor re-varnishing of the windings with super varnish including heating drying backing complete carefully and thoroughly inside the heating chamber at suitable temperature to obtain required value of insulation resistance etc all as per is 1986-87 and complete all as specified and directed by engr-in-charge, 500 kva to 800 kva, 100 kva to 400 kva, 500 kva to 800 kva, 100 kva to 400 kva, shifting the transformeravr 100 kva to 800 kva from existing site to another site by dismantling of ht and lt cables jumpers and bus bars including lt busbar cable boxes and close the transformers for loading into vehicle with the help of crane transportation to another site unloading cable connections both ht and lt testing and commissioning complete all as specified and directed by engr-in-charge, ml for replacement of silica gel breather assembly complete with breather unit and silica gel including connecting with proper necessary gaskets if necessary including removing the unserviceable breather assembly complete all as specified and directed by engr-in-charge, ml for replacement of gun metal drain valves of transformers of following capacities including dismantling old one complete all as specified and directed by engr-in-charge make - upadhyay leader zoloto, supply and fixing in repairs off load tap changer assembly suitable for any make with 7 tapping position including opening top cover conservator etc complete all as specified and directed by engr-in-charge, supply and replacement of wti winding temperature indicator of following distribution transformers including dismantling old one complete all as specified and directed by engr-in-charge, 500 kva to 800 kva, 100 kva to 400 kva, 500 kva to 800 kva, 100 kva to 400 kva, ml for replacement of oil gauge glass with gaskets of the following capacity distribution transformers of any makesizetype including dismantling old one complete all as specified and directed by engr-in-charge, 500 kva to 800 kva, 100 kva to 400 kva, ml for replacement of oti oil temperature indicator of following distribution transformers including dismantling old one complete all as specified and directed by the engr-in-charge, ml for replacement of drain plugs to valvesconservator caps of the sizes 34 1 15 valves and plugs of 100 kva to 800 kva capacity distribution transformers of any makesizetype all as directed including dismantling old one complete all as specified and directed by the engr-in-charge, supply and laying of graded coarse aggregate of size 20 mm dia size upto height of 010 mtr in outdoor sub-station yards including surface dressing nexc 05 cm deep and removing debris to a distance nexc 50 m before laying of sand complete all as specified and directed by the engr-in-charge note punned thickness will be measured and paid separately for sand, material labour for excavation in trenches not exceeding 15 metre wide not exceeding 15 meter in depth for foundation laying of cable or pipe where provided for protection of cable or fixing with poles and stays and getting out in any type of soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and directed by the engr-in-charge, material labour for returning filling in including spreading levelling watering and well ramming soil in layers not exceeding 25 cm thick complete all as specified and directed by the engr-in-charge, material labour for removal excavated material ie soil from site to a distance n exc 50 mtrs away and depositing where directed at a level n exc 15 mtr above the starting point complete all as specified and directed by engr-in-charge, material and labour for river washed and screened dry sand for filling in trenches below and around underground cables for cushioning of cables etc complete all as specified and directed by the engr-in-charge note measurement shall be taken after punning down, supplying and laying reinforced precast concrete cable cover class hv type 1 flat size 300mmx 180mm x 40mm laid along alignment of cable as protection to cable in trenches complete all as specified and directed by engineer-in-charge, ml for gi pipe light grade 80 mm dia for cable protection on road crossings plinth protection with fixed to the pole wall etc suitable fittings for cable protection, testing the cables with high voltage dc testing machine and locating the fault in the cables by fault locating machine to pin point exact position of fault disconnecting faulty 11 kv ht cables of different sizes from both ends removal of fault re-connections and testing of cables after removal of fault complete all as specified and directed by the engr-in-charge note a 11 kv ht cable joints shall be measured and paid for separately under respective items of schedule b retrieved old serviceable cable cover will be laid in trenches for cable protection if extra pcc cover and sand required at site shall be measured and paid separately under respective items of boqs c excavation and earth work will be measured and paid for separately under respective items of schedule, ml cable jointing kit for 11 kv earthed grade xlpe cable for indoor end termination heat shrinkable type joint complete with jointing material and accessories suitable for size 3 core 120 to 185 sqmm including testing after jointing complete all as specified and directed by the engr-in-charge, ml cable jointing kit for 11 kv earthed grade xlpe cable for indoor end termination heat shrinkable type joint complete with jointing material and accessories suitable for size 3 core 240 to 300 sqmm including testing after jointing complete all as specified and directed by the engr-in-charge, ml cable jointing kit for 11 kv earthed grade xlpe cable for outdoor end termination heat shrinkable type joint complete with jointing material and accessories suitable for size 3 core 120 to 185 sqmm including testing after jointing complete all as specified and directed by the engr-in-charge, ml cable jointing kit for 11 kv earthed grade xlpe cable for outdoor end termination heat shrinkable type joint complete with jointing material and accessories suitable for size 3 core 240 to 300 sqmm including testing after jointing complete all as specified and directed by the engr-in-charge, ml cable jointing kit for 11 kv earthed grade xlpe cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armored aluminium conductor cable of size 120 to 185 sqmm including testing after jointing complete all as specified and directed by the engr-in-charge note earth work will be measured and paid separately, ml cable jointing kit for 11 kv earthed grade xlpe cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armored aluminium conductor cable of size 240 to 300 sqmm including testing after jointing complete all as specified and directed by the engr-in-charge note earth work will be measured and paid separately, supply laying testing commissioning of xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cables heavy duty with aluminium conductor 11000 volts grade earthed of size 3 core 95 sqmm complete in trenches ducts on pole etc complete all as specified and directed by the engr-in-charge, supply laying testing commissioning of xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cables heavy duty with aluminium conductor 11000 volts grade earthed of size 3 core 120 sqmm complete in trenches ducts on pole etc complete all as specified and directed by the engr-in-charge, supply laying testing commissioning of xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cables heavy duty with aluminium conductor 11000 volts grade earthed of size 3 core 185 sqmm complete in trenches ducts on pole etc complete all as specified and directed by the engr-in-charge, supply laying testing commissioning of xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cables heavy duty with aluminium conductor 11000 volts grade earthed of size 3 core 240 sqmm complete in trenches ducts on pole etc complete all as specified and directed by the engr-in-charge, supply laying testing commissioning of xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cables heavy duty with aluminium conductor 11000 volts grade earthed of size 3 core 300 sqmm complete in trenches ducts on pole etc complete all as specified and directed by the engr-in-charge, servicing inspecting checking overhauling cleaning by using of blower lubrication greasing and carrying out preventive maintanance of rmu capacity 11 kv 250350 mva including calibrating the relay by conducting secondary injection tests and rmu in serviceable condition testing and commissioning complete all as specified and directed by the engr-in-charge notes i the rate quoted shall be deemed to include for necessary tp nuts bolts washers gasket insulation tape compound painting of rmu panels with approved colour including lettering details all as per exisitng etc, self powered relay with oc sc ef protectionrelay should have a front usb port for laptop interface lcd display 10 event records 5 fault records min 2 setting group and keypad for setting parameters for the relay suitable fo rmu, ct having ratio 100-501-1a for class - 10 25va for metering and class 10p10 25va for protection- 1set, cable termination bushing suitable for upto 1 run 3cx185 sq mm xlpe cable- 1set, cable termination cover boots push on type -1set, three phase ryb indicating lamps - 1set, 11kv230v ac 1kva control transformer - 1no, battery and battery charger 12ah ip-230v ac op - 24v dc - 1no, spring charging motor, ml of notice plate of 16 mm thick mild steel sheet vitreous enameled white with letters figures and conventional skull and bones in signal red colour and fixed with ms clamps bolts and nuts of approved size for ht 11 kv of size 25 x 20 cm, disconnection and taking out the idmt numeric microprocessor based relay of any type of any make from 11 kv ht panel cleaning the contacts calibrating the relay by conducting secondary injection tests checking of current transformer rectification of defects in control wiring for proper tripping of circuit breakers through cts and relay and tripping coils adjustmentsetting to plug and time multiplier settings of the relay to achieve the discrimination in tripping tunesynchronise upstream breaker relay settings re-installation of relay testing commissioning etc complete all as specified and directed by the engr-in-charge note the contractor has to arrange necessary testing kits testing equipments tools etc rental rates for the testingcalibration kits connected equipments are deemed to be included in the quoted rate testing tuning shall be carried out in the presence of representative of the department to the satisfaction of the department, taking down ht switch gear vacuum circuit breaker at sub stn of capacity 11 kv 250350 mva comprising of repairs complete overhaulingservicing carrying out preventive maintenance alongwith testing of breakers by current injection test and refixing the same after repairs overhauling note i the servicing includes for busbar duct chamber cable alleys and connecting accessories ii the rate quoted shall be deemed to include for necessary tp nuts bolts washers gasket insulation tape compound painting of vcb panels with approved colour including lettering details all as per existing etc to put in to the vcbs and panels in serviceable condition testing and commissioning all as specified and as directed by the engineer-in-charge iii major spares like breaker bushings vacuum interrupter assly busbar spout busbar spout connections circuit spoutcircuit spout connectionsbuffer fixed contacts moving contacts tank asslybarriers solenoid spares dependentspring mechanism motor mechanism trip unit etc will be measured and paid separately under relevant items of schedule a however the rate quoted shall be deemed to include for any other minor spares require replacement iv the servicing shall be carried out by auhtorised agencyrep of oem of vcb, supplying and laying as replacement in sub station 33 to 11 kv electrical insulation mat of size 5 mtr x 1 mtr x 25 mm thick confirming to is 15652 2006 complete all as specified and directed by engineer- in- charge, platform - ml for brick masonary using sub class b brick platform of size 3m x 3m x 1m height built in cm 14 complete incl all necessary excavation earth work pcc 148 type d-2 in foundation 15 mm thick rendering in cm 16 on sides and top of the brick work up to 150 mm below ground level incl sf of 02 nos ms channels of size ismc-100 for balancing of transformer embedded in pcc 124 type b-1 up to 100 mm thick rcc 124 with 10 mm steel bar placed 100mm cc including provn of steps on one side complete all as specified and directed by engineer- in- charge, fencing - ml for perimeter fencing of size 8mx4mx2m as per site condition having ms work of angle iron for post and struts of fencing around the transformer plinthsubstationlt panels etc drilling holes flat iron fillet for securing wire mess by welding to angle iron frame and framed work as in doorgate of angle iron and wiremeshdoor to be fixed by 03 nos 100mm long hinges and one sliding door bolt of 300mm long for locking arrangement complete all as specified and directed by engr- in- charge details are as follows- a angle iron post to post distance maintained not more than 02mtr size of angle shall be 40x40x5mm angle iron shall be embedded in natural ground not less than 090 m deep b ms wire 75x75mm mesh 315 mm dia 2mtr height and shall be fixed to post with flat iron 32 x 6 mm fillet with two coats of synthetic enamel paint over a coat of red oxide primer c cement concrete type d-2 148 using grade crushed stone aggregate for mass concrete foundation d brickwork with subclass b bricks straights or curved on plane exc 6m mean radius built in cement mortar 16 complete for toe wall along the perimeter fencing the toe wall shall be one brick thick 30cm high 15cm above gl and 15cm below gl on 75mm thick pcc lean concrete e the exposed surfaces of brickwork shall be rendered 15mm thick in cm 14 finished fair and even without using extra cement f the steel gate shall be of size 100m x200 m fabricated from angle iron 40x40x5 mm frame and 12x12 mm square guard bars g all the exposed surfaces of steel shall be painted with two coats of synthetic enamel paint over one coat of red oxide primer h dry stone aggregate of size 40mm spreaded leveled compacted up to 100mm thick j necessary excavation and earthwork shall be included in the quoted rate, m l for painting of vcb with si-coat 570 rtv silicone high voltage insulator coating solution prior to cleaning the complete paint surface with silica paper blower heat blower complete all as specified and directed by the engr-in-charge, supply of ht insulation tape complete all as specified and directed by the engr-in-charge

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-103780659 |Bid Value:₹ 45.00 Lakh |EMD:₹ 90.00 K |25-09-2026 6 Days Left

corrigendum : repair / maint of vcbs, rmus, distr transformers, ht electrical distr system incl repair / calibration of relays, meters and other allied wks at nad technical and residential area, abe park area under age e/m no-ii of ge (u-i) visakhapatnam

Visakhapatnam, Andhra Pradesh, India

Matching BOQ Items

ml for disconnecting carefully electrical connection from both ht lt primary secondary sides of the transformer keeping them at safe side and taking the transformer out from the plinth with the help of crane indoor outdoor type of capacity 500 kva to 800 kva 11 kv 0433 kv step down any make for carrying out complete overhauling which shall comprise of the following- a ml for lifting transporting handling the transformer to workshop and opening top cover of the transformer by unscrewing nuts bolts washers etc including disconnecting core assembly from ht lt bushing and lifting the same gently and taking out from the shell container body of the transformer b ml for draining out transformer oil from the above said transformer in the suitable capacity of container drums and keeping it in safe custody for reuse c ml for cleaning the transformer body from inside removing deposited dirt sludge foreign particles etc from the bottom body of the transformer with appropriate chemical solution and drying up the shell from inside before refilling of the transformer oil d ml for cleaning and washing thoroughly core and windings of the transformer by hosing down with clean dry oil conforming to is 3351983 removing deposited dirt sludge foreign particles from the windings core thorough inspection of windings providing insulations to leads and terminals heating drying baking complete carefully and thoroughly inside the heating chamber at suitable temperature to obtain required value of insulation resistance etc all as specified and as directed by engr-in- charge contd, all as per item no 200 above but transformer voltage stabiliser indoor outdoor type of capacity up to 250 to 400 kva, all as per item no 200 above but transformer voltage stabiliser indoor outdoor type of capacity up to 100 to 200 kva, filtration dehydration of transformer oil of transformers frmus installed at various locations to achieve di-electric strength not less than 60 kv at 25mm gap as per relevant is with portable filtration plant testing of the oil for the di-electric strength before filtration and after filtration complete all as directed by the engineer-in-charge, supply and topping up of transformer oil with di-electric strength not less than 60 kv into the conservator tank body tank of the transformer ocb frmus etc at various locations complete all as directed by the engineer-in-charge, ml for rewinding of distribution htlt transformers of capacity 500 to 750 kva type by winding the defective coils with new copper wire as per is of same gauge and existing size together with new insulated materials bracings before placing in to the transformer and assembling the coil with new insulation and fitting the coils in the chamber testing and commissioning the transformer and recording the test results complete all as directed note ml for re-insulation of serviceable coils will be measured paid separately under relevant items, all as per item no 700 above but rewinding of distribution htlt transformers of capacity 100 to 400 kva type, ml for re-insulating windings of ht lt distribution transformers of capacity 100 to 750 kva by strip opening of ht lt coils ie primary secondary coils from core assembly safely unwinding the ht lt coils ie primary secondary coils complete removing the old defective insulation paper and replacing with new dpc insulation to the copper conductor re-varnishing of the windings with super varnish including heating drying backing complete carefully and thoroughly inside the heating chamber at suitable temperature to obtain required value of insulation resistance etc all as directed by engr-in- charge, disconnection of the distribution transformer of capacity 100 to 800 kva from ht and lt supply mains removing of bus duct and bus bar leakage arresting by draining out of oil after arrangement of necessary empty oil drums buckets etc dismantling of top cover and accessories dismantling of lt bushings by disconnecting leads jumpers from inside replacement of gaskets and oil seals and re fixing of the lt bushings making internal and external connections replacement of cover gasket and accessories reassembling of acessories and cover filling back of existing transformer oil complete and making cable connections and assessing for energising the transformer complete all as specified and as directed note i the rate quoted shall include cost of materials like gaskets and oil seals and labour etc ii bushing and bushing rods shall be measured and paid separately, disconnecting the htlt connections of transformer of capacity 100 to 800 kva ie bus duct cable bunch keeping all the cables out from the htlt sides physically checking the transformer for healthiness performing the transformer tests like hvlv meggar test ratio test magnetic balance test and short circuit tests for checking condition of transformer complete all as specified and as directed note- i all testing shall be done in presence of engr-in-charge or his accredited rep and test reports shall be signed by contractor and engr-in-charge and kept on record ii if the transformer found satisfactory then htlt connections shall be done by the contractor and has to charge the transformer iii if the transformer fails in these tests then the contractor has to shift the transformer for winding overhauling which will be measured and paid separately iv cost of winding overhauling if required shall be measured and paid separately, shifting the transformer of capacity 100 to 800 kva from existing site to another site within 3 km distance range by dismantling of ht and lt cable connections jumpers and busbars including lt busbar cable boxes and closing the transformers for loading into transporting vehicle with the help of crane transportation to another site unloading cable connections both ht and lt testing and commissioning complete all as specified and as directed, ml silica gel breather assembly complete suitable for 200 to 800 kva transformer as per existing with breather unit and silica gel including connecting with proper necessary gaskets of necessary including taking down existing unserviceable breather assembly complete all as specified and as directed, sf conservator tank assembly suitable for transformer of capacity 200 to 800 kva as per existing and including connecting properly with gaskets of necessary including taking down existing unserviceable conservator tank assembly complete all as specified and as directed, sf gun metal drain valves suitable for transformer of capacity 200 to 800 kva including taking down unserviceable gun metal drain valves complete all as specified and as directed, sf off load tap changer assembly suitable for transformer of capacity 400 to 800 kva as per existing with 7 tapping position including opening top cover conservator etc including taking down existing unserviceable off load tap changer complete all as specified and as directed, sf wti winding temperature indicator suitable for distribution transformer of capacity 400 to 800 kva as per existing including taking down existing unserviceable wti complete all as specified and as directed, s f lt bushings made out of porcelain along with bushing rod made out of brass copper as per existing and suitable for distribution transformer of capacity 500 to 800 kva including taking down existing unserviceable lt bushings and complete all as specified and as directed, s f ht bushings made out of porcelain along with bushing rod made out of brass copper as per existing and suitable for distribution transformer of capacity 500 to 800 kva including taking down existing unserviceable ht bushings and complete all as specified and as directed, sf oil gauge glass with gaskets as per existing suitable for distribution transformers of capacity 500 to 800 kva including including taking down existing unserviceable oil guage glass with gaskets complete all as specified and as directed, ml for preparation of old exposed painted surfaces of indoor outdoor type transformer of capacity 500 to 800 kva and painting the same with two coats of synthetic enamel paint including writing details of transformer on transformer plinth base with white synthetic enamel paint on black synthetic enamel paint back ground complete including one coat of white wash on exposed surface of transfomer plinth base complete all as specified and as directed note - colour code of paint shall be as decided by engr-in-charge, sf oti oil temperature indicator as per existing suitable for distribution transformers of capacity 500 to 800 kva including taking down existing unserviceable oti complete all as specified and as directed, ml drain plugs to valvesconservator caps of the sizes 34 1 15 valves and plugs as per existing suitable for distribution transformers of capacity 100 to 800 kva including taking down existing unserviceable drain plugs to valvesconservator caps complete all as specified and as directed, clearing away all bushes small plants grass vegetation saplings shrubs brushwood undergrowth roots upto root level including surface dressing nexc 15 cm deep around and surroundings areas of em installations ietwo pole four structures outdoor-substation yards pump house misc em installations etc and removing rubbish debris upto a distance of not less than 50 metres outside the periphery of the area under clearance complete all as directed, supply and laying hardcore of aggregate using 20mm graded crushed stone aggregate deposited spread and leveled in layers watered and rolled rammed to a true surface in sub-station yards complete all as specified and directed note - thickness of aggregate shall be measured after compaction, excavation in trenches not exc 15 m wide and not exc 15 m in depth for foundation etc or for shafts wells cesspits manholes pier holes etc n exc 10 sq m on plan and n exc 15 m in depth and getting out in soft loose soil complete all as specified and directed, returning filling in trenching with soil and including spreading levelling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed, removing of excavated surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 15 m above the starting point complete all as specified and directed, ml sand cushioning with clean dry river sand in trenches for protection of ug cable or in sub-station yards including punning down complete all as specified and directed note- punned thickness of sand cushioning shall only measured and paid, supplying and laying un-reinforced precast concrete cable cover class hv type 1 flat of size 300mmx 180mm x 40mm cable covers as protection to cable in trenches including taking down existing unserviceable cover of any description complete all as specified and directed, sf 100 mm bore dia galvanised steel tubing light grade laid under road crossing for cable protection or fixed to poles walls or laid under floors including taking down existing un-serviceable pipe of any description complete all as specified and directed, ml cable jointing kit for 11 kv earthed grade 3 core xlpe armoured aluminium conductor cable of size 120 to 185 sqmm for outdoor end termination heat shrink type joint with jointing material and accessories including taking out unserviceable cable joint kit complete all as specified and directed, all as per item no 3200 above but for cable of size 240 to 300 sqmm, ml cable jointing kit for 11 kv earthed grade 3 core xlpe armoured aluminium conductor cable of size 120 sqmm to 185 sqmm for straight through heat shrink type joint with jointing material and accessories including taking out unserviceable cable joint kit complete all as specified and directed, all as per item no 3400 above but for cable of size 240 to 300 sqmm, supply laying xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cables heavy duty with aluminium conductor 11000 volts earthed grade cross sectional area 185 sqmm 3 core laid in trenches duct on pole on wall including taking out existing unserviceable cable complete all as specified and directed, all as per sl item no 3600 here in before but cable of size 240 sqmm x 3 core, ml for detecting ht 11kv ug cable faults located in any stretch depth with sophisticated cable fault locator consisting of microprocessor based pre-locator system hv surge generator fault pin point surge wave receiver cable identification instrument cable tracer for exact location of under ground cable routes complete all as directed note- the rate quoted deemed to be inclusive of arrangement of necessary fault locator equipment transportation of equipment charges for service engineer, ml for repair and servicing of ht 11 kv four pole structure by replacing aluminium pg clamps gi bolts and nuts pieces of acsr conductor with insulation sleeve ryb of any size as jumpers including lubricating the moving parts of ab switch and cleaning of all disc and pin insulators and applying silicon compound for prevention of arcing due to dust salt deposits over surfaces including preparation of surfaces applying zinc chromate primer on rusted surfaces and applying one coat of aluminum paint to the entire structure complete all as specified and as directed note rate quoted shall be inclusive of two coats of white wash on exposed concrete surfaces of structure, all as per sl item no 3900 but for two pole structure, servicing inspecting checking cleaning by using of blower lubrication greasing and carrying out preventive maintanance of rmu of capacity 11 kv 250 350 mva including calibrating the relay by conducting secondary injection tests and rmu in serviceable condition testing and commissioning all as specified and as directed by the engineer-in-charge notes unit rate quoted shall be deemed to include cost for necessary tp nuts bolts washers gasket insulation tape compound painting of rmu panels with approved colour including lettering details all as per exisitng, sf in repair self powered relay with oc sc ef protection having front usb port for laptop interface lcd display 10 event records 5 fault records min 2 setting group and keypad for setting parameters for the relay complete suitable for rmu of capacity 250350 mva all as specified and as directed, sf in repairs current transformer ratio - 100-501-1a accuracy class 10 burden - 25va for metering and class 10p10 25 va for protection complete all as specified and directed, sf in repairs cable termination bushing suitable for upto 1 run 3 core x 185 sq mm xlpe cable complete all as specified and directed, sf in repair cable termination cover boots push on type suitable for rmu of capacity 250350 mva complete all as specified and directed, sf in repair phase indicator lamps red yellow and blue suitable for rmu of capacity 250350 mva complete all as specified and directed, sf in repair 11kv 230v ac 1kva control transformer suitable for rmu of capacity 250350 mva complete all as specified and directed, sf in repair battery with and including battery charger 12ah ip-230v ac op - 24v dc suitable for rmu of capacity 250350 mva complete all as specified and directed, sf in repair spring charging motor suitable for rmu of capacity 250350 mva complete all as specified and directed, disconnection of 11 kv ht cables from 11 kv rmu upto 6 way and shifting transportation of 11 kv rmu to oem workshop to and fro for repair sf6 gas filling as required including connections after repair all as directed by engineer-in-charge, supply fixing testing and commissioning of 11 kv rmu sf6 switchgear assembly in repair all as directed by engineer-in-charge, supply fixing testing and commissioning of 11 kv rmu vacuum switchgear wiring including any type of buttons etc including connection with metering unit all as directed by engineer-in-charge, ml for sf6 gas refilling for 11 kv rmu upto 6 way by oem all as directed by engineer-in-charge, supply fixing testing and commissioning of 11 kv dual core dual ratio current transformer of ratio 200-1001-1a ci 10-5p10 all as directed by engineer-in-charge, supply fixing testing and commissioning of 11 kv resin cast insulators with copper studds of 630 amps copper conductor as per existing rmu all as directed by engineer-in-charge, ml for insulation coating painting inside rmu cable and vcb chamber of rmu all as directed by engineer-in-charge, supply fixing testing and commissioning of 11 kv idmt relay dual powered - self and aux powered type of siemens make model no siemens 7sr45 in repair all as directed by engineer-in-charge, supply fixing testing and commissioning of 11 kv vacuum interuppter suitable for 630 amps rmu as per existing vg1vg2 or eqvlt rmu all as directed by engineer-in-charge, sf in repair danger notice plate of size 25 x 20 cm 16mm thick mild steel sheet vitreous enameled white with letters figures and conventional skull and bones in signal red colour and fixed with ms clamps bolts and nuts of approved size for ht compete all as specified and as directed, sf in repair disc insulator porcelain vitreous brown 145 mm height 255 mm dia ball and socket type two in series assembly with cast aluminium 4 u bolt tension hardware and tension clamps for conductors working pressure ht 11 kv complete all as specified and as directed, sf in repair for pin insulator porcelain vitreous brown insulator including one galvanised mild steel spindle two galvanised iron washers and one galvanised iron nut for 11000 volts grade 150 mm dia 150 mm height complete all as specified and as directed, sf switches air break gang operated triple pole mechanically operated mounted on insulator and steel frame with operating mechanism worked from ground level for current rating upto 200 amps 11000 volts all as per clause no 1969 of ssr part-i 2009 including taking down existing unserviceable god complete all as specified and directed, sf in repair drop out lift off ht 11 kv 200 amp fuse link consisting of channel iron base having 2 nos 11 kv post type insulators in stack 2 stack per phase complete with fuse carrier of srbp tube with heavily tinned non ferrous metal parts and spring loaded phosphor bronze conforming to is 9385 complete all as specified and directed, ml earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position earth pit not less than 225 m deep below the normal ground level with top edge of the earth plate not less than 15 m below normal ground level connected to earth lead of galvanised iron strip 32 x 6 mm by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate no 3 connected to earthing test point including dismantling un-serviceable earthing complete all as specified and directed note- the unit rate shall also include for earth work in any type of soil pcc 136 type c1 chamber rcc 1153 type a1 cover slab 50 mm thick reinforced with 8 mm dia tmt bar 140 mm cc both ways 10 mm dia plain bar lifting handle embedded in cover slab main earthing lead from earth electrode to test point upto 75 m length 20 mm bore medium grade gi watering pipe 40 mm bore gi light grade earth lead protection pipe funnel wire mesh copper lugs charcoal and common salt in alternate layer etc, disconnect and taking out idmt numeric microprocessor based relay of any type make from 11 kv ht panel at p-5 sub stn nad trs-ii cleaning the contacts calibrating the relay by conducting secondary injection tests checking of current transformer rectification of defects in control wiring for proper tripping of circuit breakers through cts and relay and tripping coils adjustment setting to plug and time multiplier settings of the relay to achieve the discrimination in tripping tune synchronise upstream breaker relay settings re-installation of relay testing commissioning etc complete all as specified and as directed note- i arrangement of necessary testing calibration kits testing equipments tools etc shall be done by contractor and cost of the same shalll deemed to be included in the unit rate quoted ii testing tuning shall be carried out in the presence of representative of the accepting officer to the entire satisfaction of the rep of ge, taking down ht switch gear vacuum circuit breaker at p-5 sub stn trs-i trs-ii frcs sub stn at nad of capacity 11 kv 250350 mva comprising of following repairs overhauling servicing carrying out preventive maintenance and refixing the same after repairs overhauling a tripping off the breaker lowering the breaker with raisinglowering handle and pulling out the breaker complete from the panel along with the trolley for servicinginspectionoverhauling b servicinginspectingchecking of automatic safety shutter circuit spout and circuit spout connections for ryb phases and replacement of spares operation for serviceability and replacement of spares if required c dismantling and checking of cross bar assembly fixed contacts and current carrying parts of the breaker trolley insulated assembly and checking lamination with clamps epoxy spout isolator assembly etc d setting reassembling cleaning adjustment of fixed contacts main contact arcing contacts and chamber baffle pot assembly moving contact for proper setting of auxiliary contacts operating mechanism e servicinginspectingchecking of secondary socketsbusbar earthing plugsearthing sockets and replacement of spares if required f checking setting and adjustment of lowering and raising operation of the breaker trolley g decarbonising of busbar and connected items h lubrication and greasing of all moving parts of the trolley stopper bolt for proper operating and closing of shutter gear isolation resistance of trolley of with vacuum interrupter assembly contd, cts epoxy cast wound primary cts with minimum primary current 50 to 100 a double ratio double core protection core-5p10 metering core- class 10 25 ka for 1 sec of 15 va minimum burden, 15 sqmm flexible pvc stranded copper conductor cable unsheathed 1100 v grade for control wiring, 25 sqmm flexible pvc stranded copper conductor cable unsheathed 1100 v grade for control wiring, led indication lamps, shunt trip coil 110 v dc220 v dc, shunt trip coil 110 v dc220 v dc with assembly, breaker control switch, busbar spout, circuit spout, control circuit fuses 2 a to 63 a, hrc fuse pt ht side, vcb buffers, 110 volt dc closing coil assembly, epoxy body, vcb spouts, pole supporting assembly, spring charging motor, bus bar support insulator for vcb panel, vacuum interrupter bottle vg2, ml for replacement of damaged space heater including thermostat in ht vcb 11kv with new one suitable to operate on 110 volts dc supply complete with necessary wiring and control cable with toggle switch and all as directed by engineer-in-charge, ml for applying silicone high voltage insulator coating si-coat 570 rtv solution using electric airless sprayer to the inside surface of cable chamber alongwith busbar chamber of 11 kv indoor vcb panel including all disconnection re-connection of cables etc complete all as specified and directed by engr-in-charge, supply install testing and commissioning of mi-com feeder protection and control relay kw kva pf hz kwh 12 di 10 do one front rj45 port one rear rs485 port for modbus protocol draw out type with ct shorting feature small lcd display feature including taking down old relay of any description complete all as specified and as directed, sf in repair lightning arresters expulsion type complete with all fittings station class discharge capacity 65 kamp suitable for 11 kv complete all as specified and directed

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104286836 |Bid Value:₹ 42.29 Lakh |EMD:₹ 85.00 K |03-10-2026 14 Days Left

repair, replacement of ht electric system, ht cable, ht pole, god, vcb calibration, earthing for e/m installations under ge (n) ahilyanagar - as per tender documents

Ahmednagar, Maharashtra, India

Matching BOQ Items

excavating in trenches nexc 15 mtr wide and nexc 15m in depth for foundation etc or for shafts wells cesspits man holes etc nexc 10 sqm on plan and getting out on any type of soil complete all as specified and directed, excavating in trenches nexc 15 mtr wide and nexc 15m in depth for foundation etc or for shafts wells cesspits man holes etc nexc 10 sqm on plan and getting out in hard and dense soil complete all as specified and directed, excavating in trenches exc 15 mtr depth and nexc 15 mtr wide for foundation etc or for shafts wells cesspits man holes etc nexc 10 sqm on plan and getting out on any type of soil complete all as specified and directed, returning and filling in including spreading and levelling watering and well remming in layers not exc 25 cm all as specified and directed, removing excavated soil to a distance nexc 50 mtr and depositing where directed at a level nexc 15 mtr above the starting point all as specified and directed, supply laying testing commissioning of ht 33 kv earthed isi marked xlpe insulated screened pvc bedded electric power cable heavy duty with aluminium conductor 33000 volts grade circular screened with extruded semi conducting compound in combination with copper tape inner sheath of pvc tape galvanized steel strip flat around and overall pvc sheathed armoured conforming to is 7098 part ii 1985 amended upto date of size 3 core 300 sqmm isi marked laid in trenches or passing through pipesducts including taking down old cable of any size all as specified and as directed note - 1 excavation and earthwork sand cushioning gi pipe cable protection shall be measured and paid separately 2 cable shall be tested at high voltage test before after laying 3 no straight through joint shall be permitted inside pipe or duct 4 cost of straight through joints required if any shall deemed to be included in the quoted rates of cable, supply and fixing in replacement of ht single core power cable 11 kv isi marked earthed strandred of size 95 sqmm compacted circular aluminium conductor conductor screen with extruded semiconducting compound xlpe insulated insulation screening with extruded semiconducting compound in combination with copper tape aluminium round wire armored and frls pvc inner and outer sheathed oxygen index cable confirming to is 7098 part ii 2011 up to date amendments complete all as specified, supply lay hdpe dwc pipe 110mm bore for laying of ht cables etc complete with all jointing accessories all as specified and directed, sf steel tubing gi light grade of size 80mm bore dia for cable protection passing under road floor or for fixing to poles all as specified and as directed, ml for cable jointing kit for 11 kv grade cable for straight through heat shrinkable joint suitable for xlpe armoured aluminium conductor cable of size 3 core 95 sqmm all as specified and directed make dension m sealsiemens, all as per item no 10 above but 120-185 sqmm 3 core all as specified and directed, ml for end termination cable jointing kit for 11 kv grade cable heat shrinkable joint out door suitable for xlpe armoured aluminium conductor cable complete with jointing materials and accessories suitable for 3 core 95 sqmm all as specified and directed make denson m sealsiemens, all as per item no 12 above but 120-185 sqmm 3 core all as specified and directed, all as per item no 12 above but 240-400 sqmm 3 core all as specified and directed, ml for end termination cable jointing kit for 33 kv grade cable heat shrinkable joint out door suitable for xlpe armoured aluminium conductor cable complete with jointing materials and accessories suitable for 3 core 300 sqmm all as specified and directed make denson m sealsiemens, m l for checking of ht ug 11 kv xlpe faulty cable with ht ug cable fault locating testing machine rectifying the fault putting the jointing kit and charging the cable approx length 650 rm for each job complete as all as specified and directed the rate for excavation removing of old cable laying after repairs is deemed to be included in the rates quoted, dismantling of existing unserviceable ht lt poles of any size and type from its position carefully and removing from the site and necessary excavation and earth work in any type of strata demolition of concrete disconnecting of conductor etc all as specified and as directed, ml for cement concrete 148 type d2 using graded stone aggregate as in foundation for pole including necessary form work all as specified directed, demolition of cement concrete as in pole coping and depositing where as directed, ml cement concrete 136 type c1 using graded stone aggregate as in foundation for pole including necessary form work all as specified directed, dismantling of unserviceable existing cross arms made from channels angles and unserviceable fi clamps nuts bolts etc from oh line and removing complete all as specified and as directed, ml for cross arms bracings supports clamps and back plates fabricated from structural steel sections including nuts botls washers welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one coat of red oxide primer one under coat and one inishing coat of aluminium paint all as specified and as directed, dismantling of unserviceable insulator of any type complete from its position and removing all as specified and as directed, ml for pin type porcelain vitreous brown or green insulator including one galvanised mild steel spindle steel washers and one galvanised nut of size 150mm height 150mm dia for 11000 volts grade complete all as specified directed, m l for disc type porcelain vitreous white or brown 145 mm height 255 mm dia ball and socket type complete with tension assembly clamps for conductor for 11000 volts grade single disc assembly complete all as specified directed, dismantling carefully the existing unserviceable htlt overhead line acsr conductor of any size from its position by necessary disconnecting of conductor and removing complete, supply and stringing new acsr conductor weasel ferret for over head line securing on pole complete including binding wire jointing sleeves aluminium tap and pg clamp etc of any size all as specified and as directed note - a jumper on cutout point2 pole structure4 pole structure shall be provided with pvc insulated sleeve b rate is inclusive of jumper tree branch cutting to make a safe distance from over head line, sf in repairsreplacement of continuous gi earth wire 4mm dia on cross of poles for guarding including binding with aluminum wire 16 swg etc and dismantling of old broken guarding complete all as specified and directed, ml for restringing of ht over head line consisting of 3 conductors by dismantling taking down repairing wherever required including cutting re-jointing and restringing in situ with proper sag binding to insulator with and including aluminium binding wire complete all as per specified and directed, sf jumpers in replacement made out of 61 x 259 mm weasel acsr conductor including pvc alkaline pipe and nuts bolts etc all as specified and as directed, sf jumpers in replacement made out of 61 x 472mm dog acsr conductor including pvc alkaline pipe and nuts bolts etc all as specified and as directed, dismantling of unserviceable stay assembly carefully including stay wire including necessary excavation and earth work in any type of soil demolition of pcc of any type and removing from site al as specified and as directed, sf in replacement of galvanized ms stranded stay wire of size 74mm including necessary binding straightening complete all as specified and directed, s f in replacement of loop type insulators vitreous porcelain white brown or green large size with over all dimensions 140mm clearance of hole 255mm including necessary cutting jointing all as directed by engr-in- charge, sf stay assembly complete with accessories as shown in electrical plate no 1 of ssr 2009 part i using stay rod 20mm dia including clamps made out of 50 x 6mm ms flat ms galvansied stay plate 300mmx 300mm x 6mm and galvanised thimble including insulator 90x140mm and conductor all as specified and as directed note loop type insulator stay clamps excavation and concrete shall be measured and paid separately, m l for replacement of danger notice plate of 16mm thick mild steel sheet vitreous enamelled white with letters figures and conventional skull and bones in signal red colour and fixed with ms clamps of size 25x4mm bolts and nuts of approved size for ht 25x20cm size complete all as specified and directed, ml for pruning and removing of tree branches touching to electric over head lines wild growth around lt ht over head lines and around pole and stay complete to make clear span of 15 mtr of tree both sides of the oh line with jcb hydraulic vehicle cutter and all tools plants etc all as directed by engineer-in-charge note i distance between pole to pole will be measured and paid ii any breakdown of line caused during pruning shall be made good without any extra cost iii the contractor shall ensure proper safety of the tradesmans to avoid any mishappening if any mishappening occures the contractor shall be solely responsibleiv laddervehicaltansport required for tree cutting shall be supplied by contractor at his own arrangement cost of vehicaljcbladdermanpower included in quoted rates, sf in replcement of vertical type air break switch gang operated triple pole mechnically operated outdoor type with all fittings and accessories mounted on and including ht 11 kv porcelain insulators 9 nos and steel channel frame gi operating rod 25 mm dia of suitable length to worked from ground including locking arrangements suitable for 11000 volts 400 amps current rating complete including dismantling existing one all as specified and as directed, repair maint of air break switch by replacing stationary and moving contacts flexible copper chord gi nuts bolts etc including alignment for smooth functioning from ground level all as required at site and all as specified directed, sf in replacement of ht 11 kv out door non-linear type lightening arrestor with mountings accessories complete fixed on cross arms of two pole structure gi flat strip and connect with same size of acsr conductor encased in pvc alkathine pipe with all fittings connected to earth strip with nuts bolts and washers transmission class having discharge capacity of 65 ka and rupturing capacity 5 kva and suitable for working pressure 9 kv rms complete including taking down old lightning arrestor including dismantling existing one all as specified and as directed, sf drop out fuse unit explusion type for out door air break gang operated switch single pole mounted on and including insulators for 11 kv working pressure fixed to and including ms channel with nuts bolts and washer etc synthetic bounded fuse tube complete with line capacity suitable for current carrying capacity upto 400 amps all as directed including taking down old one all as specified and as directed, ml for replacement of earthing of polessystem with galvanised earth plate 60x60 cm x 6 mm thick electrode of size and 32 x 6mm gi strip buried vertically in ground not less than 225 mtr below ground level with top edge of the plate not less than 15 mtr below ground level and connected to copper strip dia by means of nuts bolts and washers and encased in and including 15 dia gi medium grade pipe upt 24 mtr height from ground level fixed by ms flat iron clamp 40mm x 5mm with nut bolt and washers gi strip fixed to base along pole and connected to over head line for providing earthing to ht polefeeder ab switch la complete with charcoal dust salt packed around plate 150 mm thick including watering gi pipe medium grade 40 mm dia with blanking cap 15 mtr long fixed to funnel with wire mesh complete with pcc chamber and rcc chamber over all as per electrical plate no 3 of ssr part i - 2009 incl excavation and earth work in any type of strata and testing on compeltion note any length of gi strip and 15 mm dia gi medium grade pipe shall be provided as per actual requirement at site, supply install in replacement of gi strip 32 mm x 6 mm buried groundfloorsurfaceroof including taking doown existing gi strip complete all as specified and directed, supply fix in replacement of complete with saddles and epoxy insulator for fitting the stripincluding taking down existing al strip complete all as specified and directednote rate included with insulater, supply and spreading stone aggregate of size 20 mm at 11 kv substations near dp structures electrical outdoor installation yard after through cleaning anti grass treatment etc all as per pecified and as directed, supply and fix in replacement of basic numerical relay wide range with facility over current phase fault short circuit earth fault instantaneous with connected accessories complete all as specified and directed make cgl tashida, supply and fix in replacement of ingress protection relay wide range 4bi 6bo iec 103modbus on rs 485 port non draw out 24-250 vdcac universal voltage ct secondary 1a 5 a universal wide range complete all as specified and directed, labour only for disconnecting repairing servicing of existing ht 11 kv33 kv vcbssf6 breakers of any make from housing and cleaning rubbing and overhauling the mechanical parts and servicing of 11 kv indoor vcb upto 800 amp checking of quality of vaccum interrupter insulation resistances static contact resistance testing ir value ratio test polarity test and connection verification of 11 kv current transformer set of three by primary injection kit and testing and calibration of relay set of two over current and one earth fault by secondary injection kit including all other functional tests of vcb cr panel and cts pts auxilary relay complete all as directed note i rate included also for complete bus bar cleaniong and tightning checking of bus bar insulation test ir test with heat shrinkasble bus bar slive ir test crm test for busbar and breaker including testing of breaker ir testing closing and opening time test coil ressitrance test motor resistance test and submit the all final test reports checking and replacement of rusted ht hardware nut and bolts ii contractor shall make his own arrangement of testing equipments and electric supply so required a detailed test report should be submitted to engr-in-charge iii all test shall be carried out by authorised company service dealer with company othorised certificate of individual iv service charges of service engineer for attending servicingoverhauling of 11 kv vcb included in quoted rates, labour only for testing of power transformer routine regular at site 3311 kv 315 mva including removing of both side cable and refixing the same after carrying out folling test ir test ratoi test magnetic core balance test open circuit test vector group test short circuit test no load test winding resistence test complete note test report mandatory for all test and shall be submitted to engr in charge is resposibility of contractor ii external eletric supply and transport required for all above test is supplyed by contractor at his own arregement rate included in quoted rate, supply and fix in replacement of dc power pack input 230 volt ac and output 30 volt dc spd base continous load 100 va impulse load 450 volt for 240 ms backup 20 minutes complete all as specified and directred make gogate elerosystem allen electricals and equivalent, supply and fixing cttb current transformer terminal block 2 5 sqmm including control wiring 25 sqmm suitable for 11 kv vcb complete all, supply and fixing in replacement of pt fuses suitable for 11 kv rating 315 amps complete all as specified and directed, supply and fixing hooter suitable for control relay panel of range 18 -90 volt acdc complete all as specified and directed, supply and fixing in replacement of breaker control switch four position suitable for 15 amps complete all as specified and directed, suply and fixing in replacement of space heater 10080 watt for vcbs 11 kv complete all as specified and directed, s f in replacemennt for resin cast type twin secondary current transformer of ratio 100-505-5a core 115 vaclass 05 and core 2 15 vaclass 03 p10 stc 263 ka1 sec for protection and metering conforming to is 2705 of 1992 complete all as directed, supply and fixing in replacement of toughend arylic transparent door glass with gas kit of suitable size existing size 5 mm, supply and fix in replacement of auxilary contactor 2 no 2 nc with add on 30 volt dc 20-25 amps make l 7 t abb siemens, supply and fixing in replacement of trippingclosing coil 11kv 30 volt dc complete all as specified and directed make cromptonkirloskar, supply and fixing in replacement of trippingclosing coil 33kv 30 volt dc make cromptonkirloskar, supply and fixing in replacement of fuse base with carrier 20 amp make cg, supply and fixing in replacement of 32 pin plug and socket for cg breakercomplete all as specified and directed, supply and fixing in replacement of tripping half shaft for 11 kv cg vcb complete all as specified and directed, supply and fixing in replacement of closing half shaft for 11 kv cg vcb complete all as specified and directed, supply and fixing in replacemnt of master trip relay 30 volt dc cgl complete all as specified and directed, supply and fixing in replacement of big gear assembly for 11 kv vcb make - cgkirloskar, supply and fixing in replacement of small gear assembly for 11 kv vcb make- cgkirloskar, supply and fix in replacement of warm wheel for 11 kv vcb full teeth compmete all as specified and directed make cg, supply and fix in replacement of motor cut off limit switch suitable for 11 kv vcb complete all as specified asnd directed, supply and fixing in replacement of micro switch assembly for vcb 11 kv make -kirlosker cg, supply and fix in replacement of anti pumpiung device relay for 11 kv vcbs complete all as specified and directed, supply and fix in replacement of timer for motor protection range 0-25 amps for 11 kv vcbs complete all as specified and directed, supply and fix in replacement of trip circuit healthy push butten with normally open contact for 11 kv vcbs complete all as specified and directed, supply and fix in replacement of announaciator for sf6 control and relay panel upto 12 window voltage range 18-90 volt complete all as specified and directed, m l for replacement of sf6 copper armed cable 10 core 25 sqmm complete all as specified and directed, ml for gas charging for breaker by using sf 6 gas including checking sf6 gas pipe line pole leakage and reparing and reffiling of gas complete all as specified, supply and fix in repair of ratchet wheel assembly for sf6 breaker 33 kv, supply and fix repair povel set assembly make as per existing site for sf6 breaker, supply and fix in repair closing latch aseembly, supply and fix in repair of complete set oring assembly, supply and fix in repair of crank lever assembly, supply and fix in repair of avr relay for rtcc panel 110v ac, supply and fix in repair of tap position indicator meter for rtcc panel complte all as specified, supply fix and testing of rtcc panel including rewiring relay setting testing calibration and reconditioning complete all as specified and directed, labour only for dehydration filtration and cleaning of transformer oil of 33 kv 11kv power transformer distribution transformer ht switchgear till achievement of die-electric-strength of strength should be not less than 40 kv for new insulating oil and 45 kv for existing oil at 25mm gap all as specified and directed note i toping of transformer oil shall be measured and paid separately ii transportation of filtration vehical and required vehical mounted dg set for power supply during the filtration of transformer is responsibility of contractor and rate included in quaited rates, supply only new insulating oil conforming to is 335 for power transformermocb etc all as specified and directed note transfor oil shall be supply only in seailed barrel, decanning the power transformer oil from leaking transformer by opening the stop valvechecking for leakages arresting the leakages replacing cork sheet gasket 5 mm thick bushing washer hvlv road tapchanger gasket reassembling the transformer completely at nearest authorized workshope refilling transformer oil connecting ht lt connection complete and back install at sub station 3311 solapur new klp all as directed note i spares required shall be measured and paid separately under relevant ii topping of transformer oil will be measured and paid separately iii the rate quoted includes hvlv rod gasket cork sheet washers tap changer gaskit etc iv the rates also includes charging with and without load v the rates includes transportation of transformer to workshop and after repairing installed back at site complete all as directed by engr-in-charge vi re-insulation heating of lvhv coil included in rate quoted, ml for existing 33 kv 800a god set horizontal operation by replacing all stationary and moving contacts for all the three phases rutsed nuts bolts all as specified and directed, ml for repair and servicing testing and recommissioning series reactor by replacing gasket set insulating oil etc including painting by using two coats of synthtic enemel paints all as specified and directed, m l for taking down carefully transformer of capacity 315 mva any make any type from pole plinth base disconnecting hvlv side connections earthing strip of transformer supporting angles cross arm shifting transporting transformer carefully from the site to the workshop minimum 30 kms from site opening the top cover of the transformer bushing removing the tap changer conservator breather assembly draining of oil from the transformer lifting the core complete taking out defective coils from the core cleaning the tank and reassembling the transformer after carrying out the repairsreplacement of worn out part ovening the complete unit till to get desired megger value complete spray painting transporting returning back to the site installing re-commissioning and testing of the transformer at its original place as per is 2026 connecting up hv lv sides earthings supports cross arms etc all as directed by eic i repair of damaged transformer is including of quoted rate ii lv coil reinsulation -543 kg is including of quoted rate iii hv coil re insulation - 640 kg is including of quoted rate iv painting of transformer testing as per is 2026 is including of quoted rate note i spares rewinding of transformer if will be measured and paid separately under respective items, ml rewinding of oldburnt out 33 kv power transformer lv coils with super enamelled copper winding wire dpc cu of appropriate size of superior quality including insulating material varnishing heating coil in position copper bus bar and charging completely all as directed in engr-in-charge, supply and fix in repalacement of insulation material complete all as specified and directed, supply filling new transformer oil conforming to is 335 for transformer etc all as specified and directed, supply and fix in replacement of hv terminal rod complete all as specified and directed, supply and fix in replacement of hv bushing cap complete all as specified and directed, supply and fix in replacement of breather complete all as specified and directed, supply and fix in replacement of hardware tank nuts bolts complete all as specified and directed, supply and fix in replacement of oil level indicator glass complete all as specified and directed, supply and fix in replacement of explosion vent diapraghm complete all as specified and directed, supply and fix in replacement of core bolt insulation complete all as specified and directed, supply and fix in replacement of bushing member complete all as specified and directed, m l for servicing testing of oltc including opening top and bottom plate removing of oil and refilling of oil and checking of all taps removing of unsv parts and replace it complete all as specified and directed note spare parts and oil measured and paid separetly, supply and fix in replacement of resistance moving contact assembly for oltc complete all as specified and directed, supply and fix in replacement of main moving contact assembly for oltc complete all as specified and directed, supply and fix in replacement of contact for oltc complete all as specified and directed, supply and fix in replacement of transister register assembly for oltc complete all as specified and directed, supply and fix in replacement of local remote switch for oltc complete all as specified and directed, supply and fix in replacement of electrical counter for oltc complete all as specified and directed, supply and fix in replacement of directional selector switch oltc complete all as specified and directed, supply and fix in replacement of oil sealed for oltc complete all as specified and directed, supply and fix in replacement of top let gasket bottom let gasket assembly for oltc complete all as specified and directed, supply and fix in repair auto manual selector switch for oltc complete all as specified and directed, supply and fix in repair on 0ff switch for oltc complete all as specified and directed, supply and fix in repair lowerraiseack push butten for oltc complete all as specified and directed, supply and fix in repair tap changer alarm hooter complete all as specified and directed, supply and fix in repair mechanism stuck alarm hooter for oltc complete all as specified and directed, supply and fix in repair tap counter for oltc complete all as specified and directed, supply and fix in repair tap position indicator for oltc complete all as specified and directed, supply and fix in repair starter three phase 4-10 amps complete all as specified and directed, supply and fix in repair spring charging motor gear box assembly 230 vac for vcb 11 kv make - cromptonabbsiemens, supply and fix in repair control fuse links ns type 2a 4a 6a 10a 16a complete all as specified, supply and fix in repair only bus bar support insulator complete all a specified and directed, sf in repair of dropout do fuse expulsion for outdoor single pole mounted on and including 33000v insulator - 02 nos and ms channel with nuts bolts and washer of capacity 100amp all as specified and directed, sf in repair of lightning arrestor station class metal oxide 33 kv class iii iec long duration current impulse rating with pressure relief high suitable for 33 kv including reconnecting in 33 kv distribution circuit and testing all as specified and directed, supply and fixing in repair marshaling box with terminal box including tb terminal for ctpt connection for 33 kv vcb including complete wiring and testing complete all as specified and directed, supply and fix in repair 33 kv sf6 outdoor breaker tr-02 closing linkage assembly complete all as specified and directed, supply and fix in repair mcb dp 10 amps 10 ka complete all as specified and directed, ml for painting to 33 kv substation outer fencing and 11 kv substation fencing of structure complete including channel beams angle bracket supports clamps by using two coats of aluminium paint after scrapping out existing worn out paint including square wire mesh all as specified and directed, s f in replacement sign boards for mes installations of size 1200x 900mm made out with angle iron 40x40x 6mm as framing covered one side with 2 mm thick aluminium sheet rivetting on frame covered with retro reflective sheet 100mm high letters as directed th sign board to be fixed on 2 no 40x40x6mm angle iron legs of upto 2 mtr long embedded in pcc 148 using 40mm graded stone aggregate including of necesary excavation complete at the installation etc complete all as specified and directed by engr-in-charge note informationmatter on sign board shall be supplied by engr in charge, m l for painting of vcb panel consist 6 nos of panel in one job outerside with power coating spray painting with instant dry type paint rl 7032 including covering panel assessories like amp meter volt meter relay selector switch etc with masking tape and removing after paint complete all as specified and directed, m l for painting with epoxy paint for vcb breaker insulator complete all as specified, supply and fixing in repair relay fixing plate including cutting drlling fixing etc plate size 200 x 200 mm with power coating rl 7032 complete all as specified and directed, supply and fixing in repair residual voltage transformer voltage ratio - 11kvv3110kvv3190 volt 3 phase 50 hz complete set insulation level - l1 75 ac 2812 cont 19 for 30 sec burden - 50 va sec 50 va ter class - 13 p make harshanil eletric pvt ltd and equivalent as approved by ge, supply and fixing in replacement including testing of power factor capacitor set of 3 outdoor box type fixed on channel 11 kv of following specification capacitor unit pmpo 3 phase rated kvar 70 rated kv 67 50 hz for each rated current 1045 amps temp catagory 50 degree centigrade insulation level - 2875 discharge time - 600 second make madhav capacitors pvt ltd and equivalent as approved by ge, m l for shifting of transformer of any capacity from two pole fore pole structure with crane including dismantling existing connection of transfomer and shifting it on plinth within 100 mtr distance and reconection of transformer after shifting on the plinth with necessary connection and testing for serviceable complete without any damage all as specified and directed by engr in charge note any type of damageleakage of tranformer oil during the shiftingtransportation shall be repaired by contractor at his own cost without any claim, m l for transformer plinth of size 2000mm x 2000 mm x 1500 mm including excavation in trenchs in any type of soil pcc 14 8 in foundation fly ash bricks machinaryin cement mortor1 6 filling with moorum inside the plinth and rcc 124 over plinth including 16 mm bar reinforcement with center to centre distane 100mm and external surface of masonry shall be plastered with cement morter 14 and painted with weather coat paint double coat paint of shade complete all as specified and directed by engr in charge, supply and fixing in replacement of synthetic insulating rubber mat tested for ht 1122 kv with test certificate for installation of size 2m x1m x22 mm etc complete all as specified and directed by engineer-in-charge, supply and laying of bricks surrounding the stone aggregate at sub station including necessary excavation returning and removing complete all as specified and directed, ml providing pre cast rcc 113 type a1 using 20 mm graded stone aggregates as in cable route indicator of height 800 mm x width 300 mm x thickness 120 mm duly reinforced all as per details shown in drawing and having top circular section provided with and including pcc 148 type d2 using 40 mm graded stone aggregates foundation of suitable size as directed and including engraving letters mes 11 kv ht on route indicator duly painted in synthetic enamel dark brown colour paint complete all as specified and directed, supply and fixing in replacement of indicating lamp with universal voltage with color coding red yellow blue amber white green all as specified and directed, supply fixing in replacement of digital volt meter single phase all as specified and directed make lt seimens, supply fixing in replacement of digital ammeter meter 1133 kv control supply 230v ac all as specified and directed make lt seimens, s f replacement of ht bushing porcelain vitreous brown body suitable for power transformer as per is 3347 all as specified and directed, m l for replacement of breather assembly including silica gel complete suitable for power transformer existing at site complete all as specified and directed, supply and fix ht 33 kv out door type gang operated air-break switch suitable for horizontal mounting fixed type complete with 9 insulators 33 kv and with earth switch upto 200400 amps with all fittings and accessories mounted on and steel channel frame gi operating rod 25 mm dia of suitable length to worked from ground including locking arrangements suitable for 33000 volts 400 amps current rating complete including dismantling existing one all as specified and as directed, material and labour for copper earthing complete with copper earth plate electrode 600 x 600 x 3 mm thick buried vertically in ground each pit not less than 225 mtrs deep below normal ground level with top edge of plate not less than 150 m below normal ground level connected to copper strip 20 x 3 mm by means of bolts nuts and check nuts and washers etc encased in gi protection pipe 40 mm dia light grade pipe for protection of earth strip both to be provided to the extent of 75 meters all as shown on electrical plate no 3 of mes ssr - 2004 part - i gi protection pipe buried in ground laid under floors plinths or mixed on walls pole etc or concealed in walls etc with provision of mixture of charcoal dust and common salt packed upto minimum 150 mm all around the earth plate including pcc 124 type b-1 earth pit with ms angle iron frame cast iron cover with locking arrangement with gi 20 mm dia medium grade pipe and ms funnel with wire mesh for watering arrangement including necessary excavation and earth work in any type of soil strata and testing on completion complete all as specified and directed note- i cost of copper strip 20 x 3 mm and protection pipe 40 mm dia is deemed to be included in rate quoted ii excavation and returning filling of soil any type is deemed to be included in rates, material and labour for chemical earthing complete with copper earth plate electrode 900 x 600 x 5 mm thick buried vertically in ground each pit not less than 225 mtrs deep below normal ground level with top edge of plate not less than 150 m below normal ground level connected to copper strip 32 x 6 mm by means of bolts nuts and check nuts and washers etc encased in gi protection pipe 40 mm dia light grade pipe for protection of earth strip both to be provided to the extent of 75 meters all as shown on electrical plate no 3 of mes ssr - 2004 part - i gi protection pipe buried in ground laid under floors plinths or mixed on walls pole etc or concealed in walls etc with provision of mixture of charcoal dust and common salt packed upto minimum 150 mm all around the earth plate including pcc 124 type b-1 earth pit with ms angle iron frame cast iron cover with locking arrangement with gi 20 mm dia medium grade pipe and ms funnel with wire mesh for watering arrangement including necessary excavation and earth work in any type of soil strata and testing on completion complete all as specified and directed note- i cost of copper strip 32 x 6 mm and protection pipe 40 mm dia is deemmed to be included in rate quoted ii excavation and returning filling of soil any type is deemed to be included in rates, m l for replacement of sf6 copper armed cable 12 core 25 sqmm complete all as specified and directed

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104163753 |Bid Value:₹ 15.00 Lakh |EMD:₹ 30.00 K |23-09-2026 4 Days Left

repair/maint/servicing and preventive maint of 33 kv mrs switch yard, 33 kv breakers, vcbs, power transformers and calibration of relays of control panels, earthing of switch yards plants and eqpt and allied works at ayodhya cantt under age (i) ayd

Faizabad, Uttar Pradesh, India

Matching BOQ Items

servicing calibration and complete overhauling of 33 kv ht breaker vacuum type sf6 gas operated breaker of 1600 amp rating outdoor type mounted in 33 kv switch yard of existing make ie crompton greaves typemodecapacity by taking out 33 kv trolley from ht panel after switching off electric supply checking of all mechanical electrical control system for proper functioning eg spring charge system triping system remote operation indication system upward-downwardin-out movement of ht 33 kv breaker trolley etc including diassembling of operating mechanism parts well cleaning with petrol and crc-226 and replacing unserviceable spare parts reassembling of parts including well cleaning the complete panel board main busbar decarbonizing all joints busbar cts pts spouts metal parts applying the proper lubrication greasing with ap-3 grease and making 33 kv breaker perfect operating in manual and electric mode and calibration checking of indoor control panel of 33 kv circuit breaker by chechingh of tripping system through idmt over current and earth fault relay at plug setting through primary current injection method to ensure proper function of trip coil control circuit etc during fault condition setting by expert from authorised engineer and agency of authorised company of circuit breaker including submission of calibration certificate complete all as specified and directed note- replacement of unsv spare parts required to make 33 kv circuit breaker functional will be measured and paid separately as supply fixing under respective items, sf tnc control switch complete all as specified and directed, sf panel heater thermostat switch complete all as specified and directed, sf closing coil complete all as specified and directed, sf auxillary relay for buchholz relay oil temp winding temp trip 24110v dc as per exsting complete all as specified and directed, sf master relay 24110v dc as per existing complete all as specified and directed, sf remote local switch as per exsting complete all as specified and directed, supply fixing connecting and testing spring charging motoruniversal motor for outdoor type 33 kv vcb operated on 230 volts ac dc with charging time less than 15 sec of approved rating complete all as specified and directed by eic make - delco or equivalent make as approved by age i, supply and fixing of 33 kv 50 hz single phase oil filled inductive potential transformer outdoor type ratio - 33sqrt3110sqrt3 two secondary windings voltage factor - 12 continuous 15 for 30 sec creepage 900 mm windding - 1 class-10 100 va suitable for 33 kv complete all as specified and directed by engr-in-charge, sf in replacement vaccum interrupter unit of 33 kv out door type circuit breaker complete with insulator and assembly 630 amps rating all including assembling testing and commissioning at site complete all as specified and directed, supply and fix in replacement auxilary relay 110-250 volt dc suitable for over current earth fault switch gear protection complete all as specified and directed make- alsthom model no- vaa21zg8502fm or technocommercialy equivalent as approved by agei, supply and fix in replacement of 33 kv numerical 3 phase over current 1 earth fault switchgear protection relay with instantaneous high set and programmable output to simplify feeder protection wiring etc complete and testing on completion make- crompton model no cgl14c or technocommercialy equivalent as approved by agei, supply and fixing testing commisioning of electro mechanical type under overvoltage protection relay for 11 kv of make- alstom or equivalent make including neccesary wiring complete all as specified and directed note all tp accesories for testing is carried out by contractor and no extra payment to be done for testing, supply and refilling of sf6 gas suitable for ht 33 kv breaker complete all as specified and directed, sf in replacement indication lamp led type red or yellow or green or blue colour suitable for 24 v to 100 volts dc as required at site complete all as specified and directed by eic, supply and fix in repair ampare meter ammeter with digital display suitabale for measuring 33 kv electrical parameters fixed in existing panel board etc complete all as specified and directed make- secureaeschneider, supply and fix in repair voltmeter with digital display suitabale for measuring 33 kv electrical parameters fixed in existing panel board etc complete all as specified and directed make- secureaeschneider, sf in repair of strip type heater 4060 watt approx 46 in length including replacement of burnt internal wiring thermostat cut out complete all as specified and directed, ml for repair testing of control cablewiring between 3311 kv vcbs and power transformers including replacement of unserviceable and damaged cablewire with suitalbe size with connector and thimble complete all as specified and directed note control cable made up of copper will be measured and paid separately, sf in replacement of us control cable with copper conductor pvc insulated sheathed armoured of size 15 sqmm 8 core complete all as specified and directed, sf in replacement of us control cable with copper conductor pvc insulated sheathed armoured of size 15 sqmm 4 core complete all as specified and directed, servicing and maintenance of floating cum boosttrickle battery charger bank cum tripping unit for properly working on input voltage 230 v ac and output voltage 24 v dc 120 amp including replacement of us indicating lamp and meter complete all as specified and directed, supply fixing in replacement of rechargeable sealed lead acid battery maintenance free of capacity 2 volt 100 ah for breaker panel charger to provide 24 v dc supply to 33 11 kv vcbs complete all as specified and directed, servicing calibration and complete overhauling of oltc on load tap changer of 3150 kva 33kv11kv transformer of make crompton greaves after switching off electric supply checking of all mechanical electrical control system for proper functioning eg spring charge system triping system remote operation indication system upward-downwardin-out movement of tap changing mechanism oil level and winding condition heater assembly gears movements etc including diassembling of operating mechanism parts well cleaning with petrol and crc-226 and replacing unserviceable spare parts reassembling of parts including well cleaning the complete decarbonizing all joints busbar cts pts spouts metal parts applying the proper lubrication greasing with ap-3 grease and making oltc perfect operating in manual and remote control mode and calibration checking of indoor control panel rtcc remote tap changer control panel by checking of tripping system and wiring of tap changer on remote and manual mode for increace of tap and decrease of tap positionsthrough avrautomatic voltage regulating relay relay and to ensure proper function of tap changing mechanism by expert from authorised engineer and agency of authorised company of circuit breakerand transformer including submission of calibration certificate complete all as specified and directed note- replacement of spare parts required to make 33 kv oltc of 3150 kva transformer in functional condition will be measured and paid separately under respective items, supply fixing and testing of automatic voltage regulating avr relay control assembly work on aux supply 90v-260v acdc and pt supply -110 volt complete of on load tap changer control rtcc remote tap changer control panel of 3150 kva 33kv11kv transformer of make cromton greaves complete all as specified and directed, servicing and maintenance of three phase induction motor of capacity 13 hp 415 volts 50 hz along with servicing of gear sets used in oltc of 3150 kva transformer alongwith servicing of mechanical movable parts and accessories of tap changing mechanism on manual and remote mode including checking of contactors fuses and thermostatswithces complete all as specified and as directed, sf in replacement pin type porcelain vitreous white brown or green insulator including one galvanised mild steel spindle two galvanised iron washers and one galvanised iron nut 150mm height 150mm dia for 33000 volts grade complete all as specified and directed, sf in replacement ht 33 kv post insulator including fixing arrangements complete all as specified and directed, ml for disc type insulator porcelain vitreous in single disc assy for tension with tension clamps for conductors working pressure 33000 volts of specified size complete all as specified and as directed, supply and install ht 33 kv630 amp ht bushing insulator including fixing arrangements for 315 mva transformer complete all as specified and directed, ml in replacement spindle for pin insulator suitable for 33000 volts grade complete all as specified and as directed by engr-in-charge, ml for servicing repairs to air-break switch isolator off load rotating type 33 kv 800 amps to 1250 amps capacity with proper alignment of isolator rotating blades with fixed contact jaws arcing horns applying petrolium jelly to moving mechanism cleaning and lubricating to isolator gear box assembly tightening all nuts bolts and clamps of jumpers etc repairing to isolator gear box assembly and making in proper serviceable condition for smooth functioning testing and commissioning on load complete all as specified and directed, supplying and fixing in repairs malemoving contact rotating blade of hde copper silver plated of air brake off load isolator switch rotating type 33 kv 1250800 amps capacity with all fixing nuts bolts etc complete all as specified and directed, supplying and fixing in repairs fixed contacts made of hde copper silver plated of air brake off load isolator switch rotating type 33 kv 1250800 amps capacity with all fixing nuts bolts etc complete all as specified and directed, supplying and fixing of terminal pad for air brake off load isolator switch rotating type 33 kv 1250800 amps capacity complete all as specified and directed, supply and install ht 33 kv drop out fuse with double stack channel type insulator including fixing arrangements all as specified and directed, supply and install ht 33 kv jaw clamp including fixing arrangements all as specified and directed, ml for lightining arrester expulsion type set of three as per existing makemodelcapacity to be fixed on existing structure complete with all fitting transmission class discharge capacity 65 kilo amps suitable for 33000 volts incl taking down old one etc complete as specified and directed, sf in replacement pg parallel groove clamps as per is- 5561 2018 for 33 kv11 kv acsr conductors complete all as specified and directed by eic, supply installation testing and commissioning in replacement of air- break off load line isolator switch rotating type manually gear drive mechanism operated highest system voltage 36 kv rated current 1250 amps triple pole with earthing device each pole consist of insulating pedestals 03 nos on galvanized steel base as per bss is incuding rotating blade of hde copper and fixed contacts of same material spring loaded arcing horns of adequate section to brake magnetizing current of transformer as directed with adequate 50mm dia gi operating pipe for operation from ground level and operating handle complete with both off and on positions complete all as specified and directed, disconnecting all the electric connections from ht and lt side incl earthing terminals from the transformers and taking down transformer from plinth by using cranehydra and opening of top cover for visual inpection for the tap changer and winding condition or as required at site and reinstall at existing location including testing of 3311 kv capacity 315 mva all as specified and directed by engineer-in-charge note- replacement of unsv spare parts required to make transformer functional shall be measured and paid seperate as sf under respective item of work, supply fixing of hv bushing with terminal rod complete all as specified and directed, supply fixing of lv bushing with terminal rod complete all as specified and directed, labour for repairs to the leaks of transformer from tap switch fins any pats of body by replacing gasket seal or repairs to the leaks of transformer body fins by welding brazing etc complete all as specified and directed, ml in repair replacement of prv pressure relief valve of outdoor transformer capacity 3150 kva 33kv11 kv as existing size model complete with its connected wiring and control all as specified directed by engr-in-charge, ml for servicing of buchholz relay of outdoor transformer capacity 3150 kva 33kv11 kv as existing size model complete by connected wiring oil levels lekage arresting and checking of oil level complete all as specified directed by engr-in-charge, sf of breather assembly transparent type filled with silica gel of fresh blue colour suitable for transformer of capacity up to 3150 kva complete all as specified and directed, supply fixing of circular oil level gauge indicating meter with complete float valve assembly for fixing on conservator tank of 3150 kva 33kv11 kvtransformer complete all as specified and as directed, dehydrationfiltration of transformer oil of transformer and oltc by centrifuging machine without disturbing electric supply by heatingfiltration of oil to achieve dielectric strength not less than 60 kv when measured at 25 mm gap for one minute and topping up to oil level mark at the conservator complete all as specified and directed by engineer-in-charge note- i the contractor shall make his own arrangement for centrifuging machine motorised break down kit and all tp and manpower required at site centrifuging and topping up etc and unit rate quoted shall be deemed to include for the same ii new transformer oil as required shall be measured and paid separatly under respective item as supply only iii the rate quoted by contractor shall deem to be included for three phase generator supply for dehydaration if required iv record of new insulating oil used for replacement and topping up oil in transformer shall be maintained duly signed by rep of contractor and age em, supply only new transformer oil as per is for topup with dielectric strength not less than 60 kv complete all as specified and directed by engineer - in - charge make- savitapower oilhp, ml for hiring of cable fault detector to detect exact position of fault for xlpe pvc ht cable 11000 33000 volts grade heavy duty aluminium conductor of any size complete all as specified and directed by engr-in-charge, ml for fixing in repair end joint kit for 11 kv earthed grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminium conductor cable of size 120 sqmm to 185 sqmm complete all as specified and testing after jointing complete note- item rate quoted including required tprefixing reconnection of cable in the panelpole cable joints complete all as specified and directed, supply jointing and testing in replacement of indoor type cable end termination joint heat shrinkable suitable for aluminium conductor cable of size 240 sqmm x 3 core to 300 sqmmx 3core 11000 volts grade complete all as specified and directed note- item rate quoted including required tprefixing reconnection of cable in the panelpole cable joints complete all as specified and directed make- densonraychem3mcabseal, sf in repairs cable jointing kit for 33 kv earthed grade cable for outdoor termination heat shrink type end joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminium conductor cable of size 300 sqmm complete all as specified and directed note- item rate quoted including required tprefixing reconnection of cable in the panelpole cable joints complete all as specified and directed make-densonraychem3mcabseal, ml in repairreplacement for earthing complete with using copper earth plate electrode 600 mmx 600 mmx315 mm thick buried directly in ground earth pit not less than 225 mtr deep below ground level with top edge of the earth plate not less than 150 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate using 20x3mm copper earth strip as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switchcontrol board at another end gi earth lead incased in and including 50 mm dia gi light grade pipe from upper end of earth plate upto equipment with including 20 mm dia bore gi pipe light grade as water pipe from earth chamber to upper edge of the earth plate gi funnel with wire mesh fixed on water pipe and provision of pcc 124 type b1using 20 mm graded stone agg as in pits chamber and rcc pit cover 50 mm thick of precast rcc 124 type b-1 using 20 mm graded stone agg including necessary excavation and earth work in softloose soil all as shown in electric plate no 3 of ssr part-i and testing on completion complete all as specified and directed by engr-in-charge, ml in repairreplacement for earthing complete with using galvanized steel earth plate electrode 600 mmx 600 mmx 60 mm thick buried directly in ground earth pit not less than 225 mtr deep below ground level with top edge of the earth plate not less than 150 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate using 32x6 mm gi earth strip as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switchcontrol board at another end gi earth lead incased in and including 50 mm dia gi light grade pipe from upper end of earth plate upto equipment with including 20 mm dia bore gi pipe light grade as water pipe from earth chamber to upper edge of the earth plate gi funnel with wire mesh fixed on water pipe and provision of pcc 124 type b1using 20 mm graded stone agg as in pits chamber and rcc pit cover 50 mm thick of precast rcc 124 type b-1 using 20 mm graded stone agg including necessary excavation and earth work in softloose soil all as shown in electric plate no 3 of ssr part-i and testing on completion complete all as specified and directed by engr-in-charge, sf in repairreplacement of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduitpipe or fixed to poles or any other indicated situation for loop earthing etc as required by copper strip 20x3 mm all as specified and as directed, sf in repairreplacement of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduitpipe or fixed to poles or any other indicated situation for loop earthing etc as required by galvanized iron strip 32x6mm complete all as specified and directed, labour for cutting trimming of tree branches up to 80 mm wide all around from the outer face of alignment of 33 kv ht over head electric line which are going touching or falling or acsr conductor poles or near by sub stns etc at any height from gl and making clearance 15m form conductor and removing to a distance up to 100 mtr where directed by engineer-in-charge note- i trimming of the branches on one sides of the conductor ii actual length of cutting will be measured iii the distance as motioned above will be maintained during contract current period same location subject to at least 6 months period between two trimminglopping iv measurement will be taken including all conductor as one only, mlfor preparatiom of old treated steel surface of any description of 33 kv yard and applying one coat of synthetic enamel paint complete all as specified, mlfor preparatiom of old treated pcc plastered surface of wall foundation of 33 kv yard and applying one coat of white wash complete all as specified, clearing away all grass vegetation saplings shrubs brush wood undergrowth roots and trees not exceeding 30 cm girth measured one metre above ground level and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance softloose soil and getting out including sprinkling anti vegitation chemical for complete area with spray machine complete all as specified directed, a line isolator 33 kv horizontal type - servicing of line isolator horizontal break outdoor type including cleaning of contact by ctc liquid proper oiling greasing on contacts moving rod handle for proper function of moveable rod for smooth on off position and checking the incoming and outgoing connection including replacement of terminal lugspg clamps with nut bolts etc and testing with following i meggar testing between phase to phase phase to earth shall be carried out, b ht potential transformer or 33 kv 110 volt outdoor type - cleaning of bushing and terminal of ht potential transformer 33 kv 110 volts outdoor type by ctc liquid and checking of oil level and oil dielectric strength bd test and proper connection checkingtightining of control wiring and testing with following - i meggar testing between phase to phase phase to earth, c ht 33 kv or 11 kv outdoorindoor type current transformer ct cleaning of bushing and terminal by ctc solution of ct 33 kv or 11 kv of any ratio and any type and checking of oil level and oil dielectric strength bdv test and for 11 kv checking of wiring circuits and decarbonising of cablebusbar jointsand proper connection checkingtightining of control wiring and testing with following i testing between phase to phase phase to earth to be carried out by external current injection kit, d 3311 kv vcbbreaker control relay panel 02 nos 33 kv panel - cleaning of control relay panel inside outside and checkingtightningrewiring if required cost of new wire is included in quoted rate all the control cable connection of ct pt vcb meters trivector meter transformer complete and testing with the following - i over current earth fault relay tripping by external current injecting kit on primarysecondary side ii buccholz relay alarm tripping testing iii oil temperature alarm tripping testing iv winding temperature alarm tripping testing v all selector switchesindication lamps such as localremoteonoff accept reset push button indication lamp checkedreplaced if required complete the cost of switchindication lamps will deemed to be included in quoted rate, etransformer 33 11 kv up to 315 mva - cleaning of power transformer 33 11 kv outdoor type externally including all accessories such as conservator tank marshaling box bushings bucholz relay radiator bushings oil level indicator complete and checking the incoming and outgoing terminal connection complete with the following testing - i transformer oil dielectric strength bd voltage test ii buccholz relay alarm trip testing iii oil temprature alarm trip testing iv winding temprature alarm trip testing v meggar testing between hv to earth vi meggar testing between lv to earth vii meggar testing between hv to lv viii earth resistance test for body earthing ix replacement all packing and viewing glass in marshilling box if required, f do fuse 33 kv cleaning of 33kv ht insulators checking the incoming outgoing joint connection replacing with new do fuse of approved rating including replacement of conductor clapms by replacing rusted nut bolts etc and testing with the following - i meggar testing between phase to phase phase to earth, ml for cement concrete for filling in foundations or making good of road pcc floor supports etc type b1 124 using 20 mm graded crushed stone aggregate including necessary form work and fair finishing of exposed surface of concrete facia finish with cement mortar complete all as directed, supply of fuse wire made up of tinned copper of rating 20 amp to 60 amp complete all as specified and directed note- fuse wire shall be taken on charge and record of consumption of same shall be maintained by ageje em, supply of ht insulation tapes roll isi marked for terminating high voltage 3311 kv cables for insulation sealing of connection of wire and cable for bus bar insulation transformer terminal insulation etc complete all as specified and directed, supply and fixing in replacement of danger notice plate 33000 volt and 11000 volt of 16mm thick ms sheet vitreous enamelled white with letters figuers and conventional skull and bones in signal red colour and fixed with ms clamps made out of flat iron 25x3 mm nuts-bolts of approved size for ht 25 x 20 cm and complete all as specified and directed, ml for hardcore of broken stone or boulders gauge of 40mm to 63 mm deposited spread and levelled in layers n exc 15cm thick around ht four poletwo pole structure and transformer area complete all as specified, repair to earth pit earth pit cover of 3311 kv switchyard by using pcc 124 and plastering in cm 13 complete including excavation returning filling and removal etc complete all as specified and directed, supply and laying in replacement of ht high voltage insulation mat size 2mx1m made of elastomeric polymers material having a high insulation registance thus imparting total saety to human being from any leakage current having high insulation registance of class a of size 30 mm thick and 1 m width suitale for 33 kv confirming to is-15652 2006 including pasting of mat with sr-998 by adding thinner as per requirement complete all as specified and directed

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104416878 |Bid Value:₹ Refer Docs |EMD:₹ 80.00 K |01-10-2026 12 Days Left

repair to joinery, glass panes, cup board and other connected b/r works under age b/r-i and petty electrical repair including attendance day to day complaints for internal electrification in southern sector at mil stn kota

Kota, Rajasthan, India

Matching BOQ Items

taking down wooden chowkhats or frames with shutters without taking off shutters from the frames area not exceeding 150 sqm each complete all as specified and as directed, taking down wooden chowkhats or frames with shutters without taking off shutters from the frames area exceeding 150 sqm but not exceeding 400 sqm each complete all as specified and as directed, taking down wooden door shutter area exceeding 100 but not exceeding 200 sqm each complete all as specified and as directed, supply and fix solid pvc door frames of size 50 mm x 47 mm made out of 5 mm thick plain colour pvc sheet reinforced with ms square tube all as per specification drawing complete all as specified and as directed, s f factory made solid panel pvc door shutter 30 mm thick style consisting of frame made out of mild steel tubes for top bottom rails mild steel frame shall be covered with heat moulded plain colour pvc c channel having a pvc sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed pvc sheets for top rail lock rail bottom rail on either side as gap insert for top rail bottom rail panelling of plain colour pvc sheet to be fitted in the mild steel frame welded sealed to the stiles rails with 5 mm x 15 mm pvc sheet beading and decorative pvc beading of 10 mm x 10 mm 90 used instead of exposed portion of pvc sheet beading and joined together with solvent cement suppling fixing in the frame at site as per specification drawing complete all as specified and as directed, s f factory made single extruded wpc wood polymer composite solid door window ceosetory windows other frames chowkhat of size 45 x 70 mm comprising of virgin pvc polymer of k value 58-60 suspension grade calcium carbonate and natural fibers wood powder rice husk wheat husk and non toxic additives maximum toxicity index of 12 for 100 gms fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg cum screw withdrawal strength of 2200 n face 1100 n edge minimum comp ressive strength of 58 nmm2 modules of elasticity 900 nmm2 and resistance to spread of flame of class a category with property of being termiteborer proof water moisture proof and fire retardant and fixed in position with ms hold fast lugsss dash fasteners of required dia and length complete as per direction of engineer-in-charge and as per specification drawing as applicable to item 08100a given in ssr part ii 2020 ms hold fast lugs or ss dash fasteners shall be paid for separately note for wpc solid doorwindow frames minus 5mm tolerance in dimension ie depth and width of profile shall be acceptable variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made make-rajshrisintexaccucelduraplast, sf for factory made 30mm thick 100 solid wpc wood polymer composite laminated flush door shutter of required size comprising of virgin pvc resin of k value 57-60 suspension grade calcium carbonate and natural fibers wood powders rice husk wheat husk and non toxic additives maximum toxicity index of 12 for 100 grm made from extrusion process wpc foam sheet single extruded inner with having minimum density not less than 650 kgcbm having good screw holding capacity screw withdrawal strength of 1800 n face 900 n edge minimum compissive of 50 nmm2 modulus of elasticity 850nmm2 and resistance of spread of flame of class a category with property of being termite borer freewater moisture proof and fire retardant wpc to be laminated with pvc foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk ss screws all as per direction of engineer in-charge material test certificate and authentication should be compulsory provided by the manufacturing company for wcbathroomtoiletkitchenbalcony doors make-rajshrisintexaccucelduraplast, s f hot rolled medium and high tensile structural steel of grade e 250 quality c conforming to is 2062 2011 as in framed work as in doors or gates of angle or other section with gusset plates rails braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering running rails and guides and hanging also fastening and fixing complete all as specified and as directed, preparation of newly or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed, s f 35 mm thick timber species of super group and durability class i as per is 12896 1990 and first grade as per is 1003 part-1 2003 factory made panelled shutters one panel with lock rail and panel of 12 mm thick veneered particle board grade -i type -i solid core general purpose designation so gp-i conforming to is 3097 supplied and fixed to chowkhats the size of style and rail as per is 1003 part i kiln seasoned and chemically pressure treated, m l for 35 mm thick iind class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass wire gauze etc without sash bar edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in ssr part-i section 8 clause 824 b complete all as specified and as directed, s f stainless steel wire cloth 036 mm nominal dia of wire and average width of aperture 140 mm and fixed with stainless steel wire staples complete all as specified and as directed, s f in renewal mild steel door spring of rat tail type of size 150 mm bright finish including roller and roller plate short type fighter jet aeroplane shape type complete all as specified and as directed, s f flush door shutters 30 mm thick solid core of block boards construction mr grade commercial type with stiles rails and lipping of timber as given in group 2a and group 2b of annex b of is 2202 part 1 1999 both sides both face is covered with decorative face veneer with lippingframe to match complete all as specified and as directed, s f 100 mm size medium weight stainless steel butt hinges made out of cold rolled complete all as specified and as directed, s f butt hinges extruded aluminium alloy with galvanised mild steel wire pin anodized to a bright natural mat finish not be less than grade ac 10 of is 1868 1996 hinge designation 100b21 as per is 205 1992 complete all as specified and as directed, s f aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys 150 mm long dia of bolt 12 mm anodized finish not be less than grade ac 10 of is 1868 1996 with transparent anodic film complete all as specified and as directed, s f aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys 200 mm long dia of bolt 12 mm anodized finish not be less than grade ac 10 of is 1868 1996 with transparent anodic film complete all as specified and as directed, s f extruded aluminium alloy handle fabricated type 100 mm size anodized to a bright natural mat finish not be less than grade ac 10 of is 1868 1996 complete all as specified and as directed, s f extruded aluminium alloy handle fabricated type 150 mm size anodized to a bright natural mat finish not be less than grade ac 10 of is 1868 1996 complete all as specified and as directed, s f aluminium alloy sliding door bolts with hasp staple and fixing clips of sheets or extruded sections and fixing bolts and sliding bolts of extruded sections of aluminium alloy 250 mm long anodized to a bright natural mat finish not be less than grade ac 10 of is 1868 1996 complete all as specified and as directed, m l for preparation of new or previously untreated wood or wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed, s f in renewal stainless steel sliding door bolts type i plate type size 250 mm stove enamelled black finish to back plate straps and staple electroplated finish with nickel and chromium to hasp and bolt bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and as directed, s f in repairs floor door stoppers made out of aluminium alloy pressure die casting body and tongue with hard drawn steel wire spring overall length of cover plate 140 mm 45 mm thickness of cover plate anodized to a bright natural mat finish not be less than grade ac 10 of is 1868 1996 suitable for 30 35 mm thickness of door shutter fixed in floor complete all as specified and as directed, s f in repairs extruded aluminium alloy handle fabricated type 150 mm size anodized to a bright natural mat finish not be less than grade ac 10 of is 1868 1996 complete all as specified and as directed, sf 17-19 mm thick modular membrane kitchen cabinet door shutters and shelves made out of hdhmr boards in wood grain colour and half round edges complete all as specified and directed, sf in renewal of poeder coated stainless steel ss 304 sensys integrated soft close hinges having finish of niclesilver complete all as specified and directed, s f in renewal of aluminium gprofile cabinet drawers handle in shutter of approved make and shape complete all as specified and as directed, s f in renewal of powder coated ss cabinet drawers handle ss 304 having a length of 250mm of approved make and shape complete all as specified and as directed, s f in repairs aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys 100 mm long dia of bolt 10 mm anodized finish not be less than grade ac 10 of is 1868 1996 with transparent anodic film complete all as specified and as directed, resecuring or easing adjusting without taking down wooden door shutter area not exceeding 100 sqm each complete all as specified and as directed, resecuring or easing adjusting without taking down wooden door shutter area exceeding 100 but not exceeding 200 sqm each complete all as specified and as directed, powder coated aluminium minimum thickness of powder coating 50 micron work for doors windows ventilators and partitions fixed portions with extruded built up standard tubular sections appropriate z sections and other sections of approved make conforming to is733 and is1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions ie at top bottom and sides with required epdm rubber neoprene gasket etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing paneling cp brass stainless steel screws all complete as per architectural drawings and the directions of engineer-in-charge complete all as specified and as directed, supply fabricated and fixing powder coated thickness of powder coating not less than 60 micron anodised aluminium grill anodised transparent or dyed to required shade according to is 1868 with minimum anodic coating of grade ac 15 of approved designpattern with approved standard section and fixed to the existing window frame with cp brass stainless steel screws 200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of engineer-in-charge, m l for 4 mm thick aluminium composite panel coloured with decorative choice fixed to aluminium frame work as in wallcolumnceiling panellingcladdingdoor partitions complete all as specified and as directed, supply fix sheet glass ordinary quality 5 mm thick and glazed with oil putty or fixed with beads in square not exceeding 05 sqm in each pane complete all as specified and as directed, dismantling of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors aprons etc complete all as specified and as directed, m l for 16-18 mm thick granite of black colour table rubbed and polished in steps jambs pillars window cills cooking platforms and like over and including 20 mm thick cement mortar 14 including pointing in white cement 12 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed note- the quoted rates shall be inclusive of - i moulding of front and side of slab including polishing ii granite shall be laid in single piece of any size with rounding of edge and a groove shall be provided beneath the projection portion of slab iii gas pipe hole should be provided in kitchen slab, m l for green marble work 16 to 18 mm thick table rubbed and polished in steps jambs pillars window cills cooking platforms and like including laying over 20 mm thick cement mortar 14 including pointing in white cement 12 using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed, s f exposed type hydraulically regulated door closers universal closer bottle type type a designation no 3 suitable for 61 kg to 80 kg mass of doors 851 mm to 1000 mm width of door cast iron non porous body and black plate cast iron piston or pack piston pillion painted and finished with lacquer in colours as per is 3564 1995 complete all as specified and as directed, s f in repairs mortice lock vertical type cast brass 4 levers vertical type 75 mm size finished smooth fixed in position complete all as specified and as directed, s f in renewal double action concealed type floor springs hydraulically regulated made up of minimum 125 mm thick aluminium alloy sheet foundation box main body with stainless steel top cover governing pivot made of brass other parts made of mild steel heavy duty complete all as specified and as directed, s f aluminium alloy hasps and staples type -1 safety type size 125 mm anodized finish not be less than grade ac 10 of is 1868 1996 including fixing with screws complete all as specified and as directed, hacking out old broken glass any thickness size quality or description from metal frame glazed with putty or fixed with beads complete all as specified and directed, supply fix sheet glass ordinary quality 3 mm thick and glazed with oil putty or fixed with beads in square not exceeding 05 sqm in each pane complete all as specified and as directed, s f steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and as directed, s f steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and as directed, s f in repairs stainless steel wire cloth 036 mm nominal dia of wire and average width of aperture 140 mm and fixed with stainless steel wire staples complete all as specified and as directed, supply fix toughened tempered safety glass as per is 2553 part-1 2018 flat tinted 5 mm thick fixed with steel aluminium metal frame work including rubber beading complete all as specified and as directed, s f 3 mm thick figured glass pin head type and glazing with oil putty or fixed with beads in square not exceeding 05 sqm in each pane complete all as specified and as directed, s f in repairs stainless steel curtain rod made out of stainless steel sheet of grade x 02cr19ni1o 304 s2 surface finish no 4 as per is 6911 2017 25 mm dia including brackets and holders etc complete all as specified and as directed, taking down copperaluminium point wiring light fan socket or power complete including fixture and fittings such as switches ceiling roses pendants regulators sockets wall light fittings tube light fittings surface light fitting ceiling light fittings any types of fittings etc removing materials to store for keeping in safe custody or for taking on credit and making good disturbed surfaces of walls floors etc complete all as specified and as directed, taking down old unserviceable submain wiring 15 sqmm or 25 sqmm or 4 sqmm or 6 sqmm or 10 sqmm aluminiumcopper conductors any number including battenconduit casing capping including removing materials to store for keeping in safe custody or for taking credit and making good disturbed surface to match the existing surface complete all as specified and as directed, taking down main switchmcbmccbmcb db mccb db sheet metal enclosure by disconnecting the electric supply including mcbmccbcut out etc any type and size complete all as specified and as directed, taking down existing light fitting street light fittings flood light fittings etc of any capacity any type complete all as specified and as directed, m l for point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and including single core pvc insulated unsheathed flexible conductor fr-lsh cables 15 sqmm as per is 694 2010 isi marked annealed multistranded copper conductor drawn through including heavy mechanical stresses class and -5 temperature class pvc casingcapping of suitable size as required at site including modular non modular type all accessories fittings junction boxes inspection cover etc isi marked and including providing concealed ms sheet metal sunken switch terminal box 12mm thick for mounting switches sockets fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surfaces suitable for fixing with 15 sqmm copper conductor pvc insulated unsheathed flexible multistranded copper conductor fr-lsh cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed note - cutting chases and making good to match with the adjoining surface deemed to be included in the unit quoted rate, m l for point wiring for one 3 pin 5 pin 5 amps socket outlet on the same board complete with and including single core pvc insulated unsheathed flexible conductor fr-lsh cables 15 sqmm as per is 694 2010 isi marked annealed multistranded copper conductor drawn through including heavy mechanical stresses class and -5 temperature class pvc casingcapping of suitable size as required at site including modular non modular type all accessories fittings junction boxes inspection cover etc isi marked and including providing concealed ms sheet metal sunken switch terminal box 12mm thick for mounting switches sockets fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surfaces suitable for fixing with 15 sqmm copper conductor pvc insulated unsheathed flexible multistranded copper conductor fr-lsh cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed note - cutting chases and making good to match with the adjoining surface deemed to be included in the unit quoted rate, m l for point wiring for one 3 pin 5 pin 5 amps socket outlet on independent board complete with and including single core pvc insulated unsheathed flexible conductor fr-lsh cables 15 sqmm as per is 694 2010 isi marked annealed multistranded copper conductor drawn through including heavy mechanical stresses class and -5 temperature class pvc casingcapping of suitable size as required at site including modular non modular type all accessories fittings junction boxes inspection cover etc isi marked and including providing concealed ms sheet metal sunken switch terminal box 12mm thick for mounting switches sockets fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surfaces suitable for fixing with 15 sqmm copper conductor pvc insulated unsheathed flexible multistranded copper conductor fr-lsh cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed note - cutting chases and making good to match with the adjoining surface deemed to be included in the unit quoted rate, m l for point wiring for one 3 pin 5 pin 15 amps socket outlet on independent board complete with and including single core pvc insulated unsheathed flexible conductor fr-lsh cables 25 sqmm as per is 694 2010 isi marked annealed multistranded copper conductor drawn through including heavy mechanical stresses class and -5 temperature class pvc casingcapping of suitable size as required at site including modular non modular type all accessories fittings junction boxes inspection cover etc isi marked and including providing concealed ms sheet metal sunken switch terminal box 12mm thick for mounting switches sockets fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surfaces suitable for fixing with 25 sqmm copper conductor pvc insulated unsheathed flexible multistranded copper conductor fr-lsh cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed note - cutting chases and making good to match with the adjoining surface deemed to be included in the unit quoted rate, m l for point wiring for one light controlled by two 2-way switches complete with and including single core pvc insulated unsheathed flexible conductor fr-lsh cables 15 sqmm as per is 694 2010 isi marked annealed multistranded copper conductor drawn through including heavy mechanical stresses class and -5 temperature class pvc casingcapping of suitable size as required at site including modular non modular type all accessories fittings junction boxes inspection cover etc isi marked and including providing concealed ms sheet metal sunken switch terminal box 12mm thick for mounting switches sockets fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surfaces suitable for fixing with 15 sqmm copper conductor pvc insulated unsheathed flexible multistranded copper conductor fr-lsh cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end complete all as specified and as directed note - cutting chases and making good to match with the adjoining surface deemed to be included in the unit quoted rate, s f switch 6a single pole one way 240 v ac 50 hz ordinary ipxo normal gap construction unenclosed flush type screw type terminals pattern no 1 rocker type design a complete all as specified and as directed, s f switch 16 a single pole one way 240 v ac 50 hz ordinary ipxo normal gap construction unenclosed flush type screw type terminals pattern no 1 rocker type design a complete all as specified and as directed, s f 3 pin socket outlets 16a 240 v ac 50 hz with earthing contact rewirable pillar type terminal normal protection unenclosed without shutter flush type design b complete all as specified and as directed, s f 3 pin and 2 pin combined socket outlets 6a 240 v ac 50 hz with earthing contact rewirable pillar type terminal normal protection unenclosed without shutter flush type design b complete all as specified and as directed, s f switch 6 a single pole two way 240 v ac 50 hz ordinary ipxo normal gap construction unenclosed flush type screw type terminals pattern no 1 rocker type design a complete all as specified and as directed, s f in repairs switch 6a single pole one way 240 v ac 50 hz ordinary ipxo normal gap construction unenclosed flush type screw type terminals pattern no 1 rocker type design a complete all as specified and as directed, s f in repairs switch 16 a single pole one way 240 v ac 50 hz ordinary ipxo normal gap construction unenclosed flush type screw type terminals pattern no 1 rocker type design a complete all as specified and as directed, s f in repairs 3 pin socket outlets 16a 240 v ac 50 hz with earthing contact rewirable pillar type terminal normal protection unenclosed without shutter flush type design b complete all as specified and as directed, s f in renewal 3 pin and 2 pin combined socket outlets 6a 240 v with earthing contact rewirable pillar type terminal normal protection unenclosed without shutter flush type design b complete all as specified and as directed, s f in repairs switch socket combination with 3 pin socket outlets 6a 240 v ac 50 hz with earthing contact rewirable pillar type terminal normal protection unenclosed without shutter flush type design b and switch 6 a single pole one way 240 v ac 50 hz ordinary ipxo normal gap construction unenclosed flush type screw type terminals pattern no 1 rocker type design a complete all as specified and as directed, s f in repairs switch socket combination with 3 pin and 3 pin having two earthing pins combined socket outlets 6a 16a 240 v ac 50 hz with earthing contact rewirable pillar type terminal normal protection unenclosed without shutter flush type design b and switch 16 a single pole one way 240 v ac 50 hz ordinary ipxo normal gap construction unenclosed flush type screw type terminals pattern no 1 rocker type design a complete all as specified and as directed, s f in renewal of capacitor of capacity 25 to 40 mfd as required depending upon the model of ceiling exhaust fan incl plastic holder for capacitor isi marked complete all as specified and directed, s f in repairs step type electronic fan regulator capacitor type 100 watt 240 volts 50 hz single phase flush type on the existing phenolic laminated sheet complete all as specified and as directed, s f in repairs bell push 6a single pole one way 240 v ac 50 hz ordinary ipxo normal gap construction unenclosed flush type screw type terminals pattern no 1 rocker type design a complete all as specified and as directed, s f in repairs 3 pin and 2 pin combined modular socket outlets 6a 2 modules 240 v ac 50 hz with earthing contact rewirable pillar type terminal normal protection unenclosed without shutter flush type design b complete all as specified and as directed, s f in repairs modular switch 6a single pole one way one module 240 v ac 50 hz ordinary ipxo normal gap construction unenclosed flush type screw type terminals pattern no 1 rocker type design a complete all as specified and as directed, s f in repairs 3 pin and 3 pin with common earthing pins combined modular socket outlets 6a 16a 2 modules 240 v ac 50 hz with earthing contact rewirable pillar type terminal normal protection unenclosed without shutter flush type design b complete all as specified and as directed, s f in repairs modular switch 16a single pole one way one module 240 v ac 50 hz ordinary ipxo normal gap construction unenclosed flush type screw type terminals pattern no 1 rocker type design a complete all as specified and as directed, s f in repairs modular stepped type electronic fan regulator capacitor type 100 watt 240 volts 50 hz single phase humming free flush type on the existing phenolic laminated sheet complete all as specified and as directed, s f modular white cover plate with frame 8 modules complete all as specified and as directed, s f modular white cover plate with frame 6 modules complete all as specified and as directed, s f modular white cover plate with frame 4 modules complete all as specified and as directed, s f modular white cover plate with frame 3 modules complete all as specified and as directed, s f modular white cover plate with frame 1 module complete all as specified and as directed, s f in repairs ceiling roses 6a 240 v surface type intended to support mechanical loads by means of flexible cord having provision for the connection of switch wiring screw type terminal made out of polyamide or hornbean complete all as specified and as directed, s f in repairs bayonet plastic lamp holder 2 a 250 v ordinary backplate non-switched unenclosed without t marking b22d with m13 x 1 threaded entry for the following varietiesratings 1 metallic batten type with backplate fixing 2a 240 v ac 2plastic type with backplate fixing 2a 240 v ac 3plastic type made of bakelite with cordrip fixing, s f in repairs buzzer din dong suitable for single phase ac 240 volts complete all as specified and as directed, s f led tube fitting 4 feet 20 watts including tube with high power leds as light source and electronic driver complete all as specified and as directed, s f led tube light fitting 2 feet 10 watts including tube with high power leds as light source and electronic driver complete all as specified and as directed, supply and fixing round shape 12 watt 220 volts ac recessed type with high efficiency pmma diffuser soft glare free light complete with drivers holders led lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed, supply and fixing round shape 15 watt 220 volts ac recessed type with high efficiency pmma diffuser soft glare free light complete with drivers holders led lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed, s f led luminaire 600 mm x 600 mm 3536 watt 220 v ac recessed type with high efficiency pmma diffuser soft glare free light crca steel sheet housing cri greater than 80 power factor of minimum 095 life span of minimum 50000 working hours complete with driver holders led lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed, s f in renewal decorative type wall light fittings made of polycarbonate suitable for 1015 watt retrofit led including led 10 watt spiral b22 base including wiring using three core pvc insulated pvc sheathed flexible stranded copper conductor fr-lsh cables suitable 15 sqmm as per is 694 2010 complete all as specified and as directed, s f led streetlight building security light nominal power 35 watt 230 v ac outdoor type with aluminium pressure die-cast housing polyester powder coated ip 6566 protection complete with in-built integrated electronic led driver including wiring using three core pvc insulated pvc sheathed flexible stranded copper conductor fr-lsh cables suitable for outdoor use 15 sqmm as per is 694 2010 complete all as specified and as directed, m l for bracket made out of gi pipe 32 mm dia medium grade 12 metre long bent to shape with ms flat iron clamps made out of 40 mm x 6 mm thick mild steel nuts bolts including taking down old unserviceable complete all as specified and as directed, s f in renewal of electronic drivers of led lights suitable for 3536watt 220 volt complete all as specified, s f in renewal of electronic drivers of led lights suitable for 11w to18 watts isi marked 220 volt complete all as specified, s f in renewal of led bulbs suitable b-22 or thread type base of capacity 9w to 12 watts in cool light warm white 220 volt complete all as specified, supply and fix concealed sub main wiring complete with and including four nos single core pvc insulated unsheathed flexible conductor fr-lsh cables 10 sqmm as per is 694 2010 isi marked annealed multistranded copper conductor drawn through and including medium mechanical stresses class pvc conduit as per is 9537 part-iii 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 10 sqmm two nos single core copper conductor pvc insulated unsheathed flexible multistranded copper conductor fr-lsh cable for earthing and connected to common earth dolly complete all as specified and as directed note 1- four runs of 10 sqmm cable two runs of 10 sqmm cable and one run of conduit shall be measured and paid as one unit length, supply and fix sub main wiring complete with and including two nos single core pvc insulated unsheathed flexible conductor fr-lsh cables 10 sqmm as per is 694 2010 isi marked annealed multistranded copper conductor drawn through and including medium mechanical stresses class pvc conduit as per is 9537 part-iii 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 10 sqmm one no single core copper conductor pvc insulated unsheathed flexible multistranded copper conductor fr-lsh cable for earthing and connected to common earth dolly complete all as specified and as directed note - two runs of 10 sqmm cable one run of 10 sqmm cable and one run of conduit shall be measured and paid as one unit length, supply and fix sub main wiring complete with and including two nos single core pvc insulated unsheathed flexible conductor fr-lsh cables 6 sqmm as per is 694 2010 isi marked annealed multistranded copper conductor drawn through and including medium mechanical stresses class pvc conduit as per is 9537 part-iii 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 6 sqmm one no single core copper conductor pvc insulated unsheathed flexible multistranded copper conductor fr-lsh cable for earthing and connected to common earth dolly complete all as specified and as directed note - two runs of 6 sqmm cable one run of 6 sqmm cable and one run of conduit shall be measured and paid as one unit length, supply and fix sub main wiring complete with and including two nos single core pvc insulated unsheathed flexible conductor fr-lsh cables 4 sqmm as per is 694 2010 isi marked annealed multistranded copper conductor drawn through and including medium mechanical stresses class pvc conduit as per is 9537 part-iii 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 4 sqmm one no single core copper conductor pvc insulated unsheathed flexible multistranded copper conductor fr-lsh cable for earthing and connected to common earth dolly complete all as specified and as directed note - two runs of 4 sqmm cable one run of 4 sqmm cable and one run of conduit shall be measured and paid as one unit length, supply and fix sub main wiring complete with and including two nos single core pvc insulated unsheathed flexible conductor fr-lsh cables 25 sqmm as per is 694 2010 isi marked annealed multistranded copper conductor drawn through and including medium mechanical stresses class pvc conduit as per is 9537 part-iii 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including all accessories and fixed on walls and 25 sqmm one no single core copper conductor pvc insulated unsheathed flexible multistranded copper conductor fr-lsh cable for earthing and connected to common earth dolly complete all as specified and as directed note - two runs of 25 sqmm cable one run of 25 sqmm cable and one run of conduit shall be measured and paid as one unit length, s f double door mcb distribution board of sheet metal enclosure single pole and neutral 8 way with 200 amps rated bus bar 240 volt ip42 protection grade and fixed with pvc plug and screws and grouted in wall with m15 nominal mix using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed make- legrand ekinox3 series schnieder easy 9 series abb cat no isyp011608c0001 or equivalent technocommercially equivalent make as specified in ps, s f double door mcb distribution board of sheet metal enclosure single pole and neutral 12 way with 200 amps rated copper bus bar 240 volt ip42 protection grade and fixed with pvc plug and screws and grouted in wall with m15 nominal mix using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directed, s f double door mcb distribution board of sheet metal enclosure triple pole and neutral 4 way with 200 amps rated bus bar 415 volt ip42 protection grade and fixed with ms hold fast and grouted in wall with m15 nominal mix using 20 mm nominal size graded crushed stone aggregate complete all as specified and as directedmake- legrand ekinox3 series schnieder easy 9 series abb cat no isyp021604c0001 or equivalent technocommercially equivalent make as specified in ps, s f miniature circuit breakers mcb single pole sp unenclosed panel board type screw type terminals for external copper conductors c-type instantaneous tripping rated voltage single phase rated frequency 50 hz rated current 6a to 32 a rated short circuit capacity 10 ka any type of fixation protection ip 20 complete all as specified and as directed, s f miniature circuit breakers mcb two pole with one protected pole spn unenclosed panel board type screw type terminals for external copper conductors c-type instantaneous tripping rated voltage single phase rated frequency 50 hz rated current 6 a to 32 a rated short circuit capacity 10 ka any type of fixation protection ip 20 complete all as specified and as directed, s f miniature circuit breakers mcb four pole with four protected pole fp unenclosed panel board type screw type terminals for external copper conductors c-type instantaneous tripping rated voltage 415 v three phase rated frequency 50 hz rated current 40 to 100 amp rated short circuit capacity 16 ka any type of fixation protection ip 20 complete all as specified and as directed, s f sheet metal enclosure with socket plug top and mcb single pole and neutral enclosure with two pin earth plug and socket complete with mcb spn 32 amps 240 volts complete all as specified and as directed, s f in renewal rectangular block for mounting dbs switches sockets fan regulator etc with 3 mm thick plastic laminated sheet cover of size 02 module complete all as specified and as directed, s f in renewal rectangular block for mounting dbs switches sockets fan regulator etc with 3 mm thick plastic laminated sheet cover of size 04 module complete all as specified and as directed, s f in renewal rectangular block for mounting dbs switches sockets fan regulator etc with 3 mm thick plastic laminated sheet cover of size 06 module complete all as specified and as directed, s f in renewal rectangular block for mounting dbs switches sockets fan regulator etc with 3 mm thick plastic laminated sheet cover of size 08 module complete all as specified and as directed, s f in renewal of 3 mm thick bakelite sheet of size 100 mm x 100 mm for fixing of existing new switches sockets fan regulator etc including cutting making holes for fixing accessories and fixing on sunken box with screws incl necessary connection and testing complete all as specified and as directed, s f in renewal of 3 mm thick bakelite sheet of size 125 mm x 200 mm for fixing of existing new switches sockets fan regulator etc including cutting making holes for fixing accessories and fixing on sunken box with screws incl necessary connection and testing complete all as specified and as directed, s f in renewal of 3 mm thick bakelite sheet of size 150 mm x 200 mm for fixing of existing new switches sockets fan regulator etc including cutting making holes for fixing accessories and fixing on sunken box with screws incl necessary connection and testing complete all as specified and as directed, s f in renewal of 3 mm thick bakelite sheet of size 250 mm x 100 mm for fixing of existing new switches sockets fan regulator etc including cutting making holes for fixing accessories and fixing on sunken box with screws incl necessary connection and testing complete all as specified and as directed, m l for disconnecting of existing submain copper cables at tpn 415 volts dbsbusbar chambers and re jointingtightningproper clamping with usage of pvc ties pvc wall clamps drawin capping and casingconduitflexible pipes if required and making good at loosen wires at electric maters 1 ph 3 ph dbs at md accnotm areasvarious walls complete all as specified and directed note i minor spares such as clamps lugs pvc ties wall clamps all shall be deemed in quoted rate ii re fixingtightning of cables length shall be measured appx 2 mtr and more iii capping and casing used in job shall be measured and paid seperately under appropriate item, m l minor repairing at sparking switchessockets at switch boards and tighetningre connecting of loosen wires at spn 240 volts dbsswitch boards elect fittings fixtures with proper arrengements by usage of screws pvc ties wall clamps drawn in existing capping casingconduitsflexible pipes and making good at loosen wires at various walls complete all as specified and directed note i no spares replacement under this item excluding such as pvc ties wall clamps all shall be deemed in quoted rate ii incase of any itemswitchsocketfixtures etc found burntunsv it shall be measured and paid under relevent items as above only, attending day to day internal electrical complaints at mes complaint cell along with own transportation with necessary tools for rectification of urgentrepair nature of electrical complaints carrying out minor repairs such as checking of short circuits mcb burnts trippings checking of ryb phase in dbs changing of mcbs connections of small pieces of wires for restore domestic elect supply carrying out repairs such as tightening of loosen electric connections nuts bolts screws of switches sockets switch boards making joints and covering with pvc tape minor repairs to ceiling fans exhaust fans like replacement of capacitors cleaning and oiling etc as required to make the electrical itemsappliances fully functional during 0830 hrs evening to 1730 hrs on all days except holidays guzzeted holidays complete all as specified and directed note 1 replacement of any minor spare parts required for attending complaints shall be included in quoted rates 2 he complaints shall be attended defects shall be rectified by a team of electrcians along with adiquate helpers as directed by engr-in-charge 3the compalints shall be attended defect shall be rectified with in 08 hours commencing from date and time of notifying the complaint failing which a penalty rs 200 per complaint per day08 hours shall be leviedimposed on the contractor and recovery shall be made from contractors dues, sf 16-18 mm wide 1mm thick pvc edge banding pasted to edges of pvc furniture with suitable adhesive complete all as directed

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

Prev 12 13 Next