HomeTendersMilitary Engineer Services TendersTransformer Tenders

91 Latest Transformer Tenders in Military Engineer Services

Find the latest transformer tenders in military engineer services for 2026 from government departments, corporations and state PSUs. Get tender details and bidding information.

FILTERS

Category: Transformer

Organization: Military Engineer Services

Live Transformer Tenders in Military Engineer Services 2026

Select All

61 |Bid Value:₹ 20.30 Lakh |EMD:₹ 41.00 K |22-09-2026 3 Days Left|T247 ID-103992981

provn of 20desert cooler s/l acn of jcos/or of 611eme bn, 05dfreezer 500ltr, 05refgtr 235l for mh, 04water cooler alongwith central ro water sys otm accn (p-8) 11rsr, spl repair/replacement of ber transformer, water cooler, fans, geysers and refgtr

Ahmedabad, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

62 |Bid Value:₹ 19.90 Lakh |EMD:₹ 40.00 K |02-10-2026 13 Days Left|T247 ID-104252049

repair/mainteance of ht electrical services, connected eqpt/plant (transformer)with ht cables, o/h lines of cda/lao complex under ge guwahati

Kamrup, Assam, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

63 |Bid Value:₹ 19.00 Lakh |EMD:₹ 38.00 K |21-09-2026 2 Days Left|T247 ID-103877376

repair/replacement and maintenance of 11 kv ug cables, vcbs, rmu panels, ocbs, 3 pole / 4 pole ht structure, maintenance of transformers and connected works under ge chilka

Khordha, Orissa, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

64 |Bid Value:₹ 18.00 Lakh |EMD:₹ 36.00 K |01-10-2026 12 Days Left|T247 ID-104212171

repair/maintenance of ext electric supply distribution transformer /vcb and connected ht distribution network incl balidan stambh at sunjuwan mil station under ge jammu

Jammu, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

65 |Bid Value:₹ 18.00 Lakh |EMD:₹ 36.00 K |08-10-2026 19 Days Left|T247 ID-104416870

provision of 150 kva transformer at nachlana under age (i) bhalra

Doda, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

66 |Bid Value:₹ 17.00 Lakh |EMD:₹ 34.00 K |07-10-2026 18 Days Left|T247 ID-104381311

repair maint of distribution transformer vcbs and connected ht distribution network at miran sahib ml stn under ge jammu

Jammu, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

67 |Bid Value:₹ 14.99 Lakh |EMD:₹ 29.98 K |02-10-2026 13 Days Left|T247 ID-104252026

repair/maint of vcb, transformer, ht ug cable o/h acsr conductor and allied works at af stn darbhanga under ge af bihta

Patna, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

68 |Bid Value:₹ 14.50 Lakh |EMD:₹ 29.00 K |24-09-2026 5 Days Left|T247 ID-103484954

corrigendum : repair/maint of external ht electrification incl transformers, god switches, ht cables and ht overhead lines with connected works at hq cif(r) and sig regt under age (i) cif (r)

Rajouri, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

69 |Bid Value:₹ 10.00 Lakh |EMD:₹ 20.00 K |23-09-2026 4 Days Left|T247 ID-103785804

corrigendum : repair/ maintenance of ht oh lines, transformer, vcbs and connected works at various locations under age reasi of ge nagrtoa

Jammu, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

70 |Bid Value:₹ 9.93 Lakh |EMD:₹ 20.00 K |01-10-2026 12 Days Left|T247 ID-104413370

provision of trolley mounted stand by transformer 200 kva capacity alongwith connected items for army area under ge avadi

Tiruvallur, Tamil Nadu, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

71 |Bid Value:₹ 9.70 Lakh |EMD:₹ 19.40 K |19-09-2026 Ending Today|T247 ID-103588218

corrigendum : provn of mobile step down transformer out door type of 315 kva for bhagat line area under ge (u) meerut cantt

Meerut, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

72 |Bid Value:₹ 9.70 Lakh |EMD:₹ 19.40 K |19-09-2026 Ending Today|T247 ID-103592441

corrigendum : provn of trolley mounted 315 kva out door type step down transformer for north area under ge (u) meerut cantt

Meerut, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

73 |Bid Value:₹ 9.40 Lakh |EMD:₹ 18.80 K |29-09-2026 10 Days Left|T247 ID-104405359

enchancement of capacity of existing transformer from 100 kva to 160 kva to bear addl load of cold storage (meat frozen) under ge saugor

Sagar, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

74 |Bid Value:₹ 5.70 Lakh |EMD:₹ 11.40 K |21-09-2026 2 Days Left|T247 ID-104095182

repair / maintenance of external ht line incl maint of transformers , god switches and connected works at ta, keri under age (i) cif (r)

Rajouri, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

75 |Bid Value:₹ Refer Docs |EMD:₹ 70.00 K |30-09-2026 11 Days Left|T247 ID-104236142

repair / replacement and maint of transformer, ht external electric supply and ht ug cables at dholewal under ge ludhiana

Firozpur, Punjab, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

76 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |23-09-2026 4 Days Left|T247 ID-104375250

hiring of power transformer of cap 3.15mva 33/11 kv on temp basis to ensure uninterupted power supply at 33kv mrs at sriganganagar mil stn

Sri Ganganagar, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

77 |Bid Value:₹ 90.00 Lakh |EMD:₹ 1.60 Lakh |17-10-2026 28 Days Left|T247 ID-104381365

repair/maintenance of 33 /11 kv ht, sub station including calibration /testing of 33/11 kv transformers, vcbs, ht switch gear lighting arrestors and other connected works under ge babina

Jhansi, Uttar Pradesh, India

Matching BOQ Items

dehydration of tranformer oil obtained from transformersvoltage stabilizer etc dielectric strength shall not be less than 50 kv in 25 mm gap electrode after dehydration dehydration of transformer shall be carried out by using electrically operated dehydration machine complete all as specified and as directed note- i centrifuging machine with all tp testing machine of oil required for dehydration shall be arranged by the contractor ii oil required for topping up the transformer will be measured paid separately, supply only ehv transformer oil as per is 335 of 1983 is 1866-2000 for topping up of transformer oil in existing position having dielectric strength not less than 50 kv in 25 mm gap electrode complete all as specified and as directed make -power oilsavitaservo, supply fix and testing in repair wti with 3 mtr capillary lengths as per sample complete all as specified and as directed, supply fix and testing in repair oti with 3 mtr capillary lengths as per complete all as specified and as directed, s f in repair breather assembly for transformer of capacity 5 mva complete all as specified and as directed, supply only silica gel of superior quality of 5 to 10 mm grade complete all as specified and as directed, ml for surface dressing averaging 15 cm depth in softloose soil for cleaning and cuttingremoval of green vegetation in and around the installations and removal of the soil outside of the installation including spreading thin layer of anti vegetation chemical to prevent abnormal growth of grassbushes complete all as specified and as directed, material and labour for preparation of old rusted steel surfaces of ht swaged poles of 11m length and applying one coat of synthetic enamel paint up to 12 meter height as per the existing pattern above the pcc coping and one coat of aluminium paint beyond 12 meter height for the rest portion including cross arms brackets and re-writing pole numbers and cutting vegetation growth all around and on the poles up to 1 metre radius complete including replacement of self adhesive fluorescent colour tape as per existing pattern and size complete all as specified and as directed, ditto all as per item no 08 above but ht 4-pole structure complete all as specified and as directed, ditto all as per item no 08 above but ht 2-pole structure complete all as specified and as directed, s f steel tubular swaged pole with cast iron base plate finial tapper plug bolts nuts and screws type 410 sp-55 1100 m long including two coats of aluminium paints over one coat of red oxide primer on external exposed surfaces and two coats of black bituminous paint on portion embedded in concrete in internal surfaces of pole as in repairs complete all as specified and as directed, excavation in trenches not exceeding 15 m in deep not exceeding 15 m wide and getting out in soft loose soil including leveling and ramming complete all as specified and as directed, excavation in trenches not exceeding 15 m in deep not exceeding 3 m wide and getting out in soft loose soil including leveling and ramming complete all as specified and as directed, returning refilling in trenches exvcavated soils including spreading leveling well ramming in layers not exceeding 25 cm thick complete all as specified and as directed, removal of excavated surplus soil to a distance nexceeding 50 m and depositing where directed at a level not exceeding 15 metre above the starting point complete all as specified and as directed, m l pcc 136 type c2 using 40 mm graded crushed stone aggregates as in foundation of poles filling and mass concrete complete all as specified and as directed, m l pcc 124 type b2 using 40 mm graded crushed stone aggregates as in coping of poles filling and mass concrete complete all as specified and as directed, ml clean dry river sand in trenches ducts for cushioning to cable 8 cm below the cable and 15 cm above the cable and measured only 18cm thick sand paid complete all as specified and as directed, supplying laying jointing testing 185 sqmm x 3 core xlpe insulated pvc sheathed armoured ht cable 33000 volts grade heavy duty with aluminium conductor laid in trenchespipefixed on the wall etc complete all as specified and as directed, supplying laying jointing testing 185 sqmm x 3 core xlpe insulated pvc sheathed armoured ht cable 11000 volts grade heavy duty with aluminium conductor laid in trenchespipefixed on the wall etc complete all as specified and as directed, supplying laying jointing testing 120 sqmm x 3 core xlpe insulated pvc sheathed armoured ht cable 11000 volts grade heavy duty with aluminium conductor laid in trenchespipefixed on the wall etc complete all as specified and as directed, supplying laying jointing testing 95 sqmm x 3 core xlpe insulated pvc sheathed armoured ht cable 11000 volts grade heavy duty with aluminium conductor laid in trenchespipefixed on the wall etc complete all as specified and as directed, supply and laying un-reinforced precast concrete cable class hv type -i flat size 300mm x180mmx40mm complete all as specified and as directed, m l for road cutting including excavation in trenches for laying ht ug cable in pipe not exc 45 cm wide and nexc 60 cm depth or as per site requirement for laying of gi pipe making good the disturbed surfaces with cement concrete 136 type c-1 and top surface neatly finished as per existing to match with the existing complete all as specified note - gi pipe light grade will be paid and measured under separate item the cut excavated surface will be repaired on same day with pcc failing which a penality of rs 500 per day will be recovered from contractor dues, sf steel tubes light grade galvanised with all fitting laid in trenches fixed to wall and floor of 150 mm dia bore for cable protection complete all as specified and as directed, sf steel tubes light grade galvanised with all fitting laid in trenches fixed to wall and floor of 100mm dia bore for cable protection complete all as specified and as directed, s f heat shrink end termination outdoor type cable jointing kit for 11kv ht xlpe cable of size 95 sqmm 3 core complete with jointing material and accessories complete all as specified, s f heat shrink end termination outdoor type cable jointing kit for 11kv ht xlpe cable of size 120 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, s f heat shrink end termination outdoor type cable jointing kit for 11kv ht xlpe cable of size 185 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, s f heat shrink end termination indoor type cable jointing kit for 11kv ht xlpe cable of size 95 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, s f heat shrink end termination indoor type cable jointing kit for 11kv ht xlpe cable of size 120 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, s f heat shrink end termination indoor type cable jointing kit for 11kv ht xlpe cable of size 185 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, s f heat shrink end termination outdoor type cable jointing kit for 33 kv ht xlpe cable of size 185 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, s f in repair heat shrink straight through type cable jointing kit for 33 kv ht xlpe cable of size 120 sqmm to 185 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, s f in repair heat shrink straight through type cable jointing kit for 11 kv ht xlpe cable of size 120 sqmm to 185 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, s f in repair heat shrink straight through type cable jointing kit for 11 kv ht xlpe cable of size 95 sqmm 3 core complete with jointing material and accessories complete all as specified and as directed, ml in repair earthing complete with galvanised steel earth plate 600x600x6mm thick buried directly in ground earth pit not less than 40 mtr deep below ground level with top edge of the plate not less than 325meters below normal ground level connected to galvanised iron strip 32 x 6mm as earthing lead by means of bolts nuts check-nuts and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work gi pipe light grade 40 mm bore for protection of gi strip from earth electrode to and including the earth test point of galvanised ironsteel of size 75x75x 25mm supplying and laying charcoal dust common salt pcc 124 type b1 chamber and ms angle iron frame 40x40x6 cm and rcc cover 40mm thick 124 type b1 using 20mm graded stone aggregate reinforced with 6 mm dia round bars 75mm cc both ways with ms handle 12mm dia pgi funnel and wire mesh 20 mm dia gi pipe light grade for watering all as shown in drawing and connected to earth test point including testing complete all as specified and as directed, material and labour for repairreplacement of earth pit including using pcc 136 type c-1 precast rcc 1153 type a-1 cover slab of size 40x40x 6 cm reinforced with 8mm dia tmt bars 150mm cc both ways with one handle for lifting made out of 8mm dia ms bar embeded in precast cover slab including necessary excavation and earth work in any type of soil complete all as specified and as directed, ml for pin type porcelain white brown or green insulator including one galvanised mild steel spindle two galvanised iron washers and one one galvanised iron nut suitable for 33 kv grade complete all as specified and as directed, ml for disc type string of 3 disc insulator porcelain white brown or green insulator suitable for 33 kv grade complete all as specified and as directed, sf in repair pin type insulator polymer with hardware fittings grey brown or green suitable for 11000 volts grade complete all as specified and as directed, sf in repair disc type insulator polymer with hardware fittings grey brown or green suitable for 11000 volts grade complete all as specified and as directed, ml cross arms bracing supports clamps and back plates fabricated from structual steel sections including nuts bolts washers welding bending cold or hot drilling holes for bolts in any shape or size as indicted and inclusive of one primer coat one under coat and two finishing coat of aluminium paint complete all as specified and as directed, supply and fixing in repair new aluminium conductor steel reinforced acsr of any sizetype stringing and jointing on poles including providing binding wire etc complete all as specified and as directed, supply an fixing danger notice plate of 16mm thick mild steel sheet vitreous enamelled white with letters figures and conventional skull and bones in signal red colour and fixed with msclamps bolts and nuts of approved size for 33 kv ht 25x20cm size complete all as specified and as directed, supply an fixing danger notice plate of 16mm thick mild steel sheet vitreous enamelled white with letters figures and conventional skull and bones in signal red colour and fixed with msclamps bolts and nuts of approved size for 11 kv ht 25x20cm size complete all as specified and as directed, supply and fix in replacement d o drop out fuse unit double stack channel type 3 pole 33 kv channel mounted complete all as specified and as directed, supply and fix in repair polymer type air break switch gang operated triple pole mechanically operated mounted on insulator and steel frame with operating mechanism worked from ground level for current rating upto 400 amps and working pressure 11000 volts with drop out type fuses set 12 insulators three numbers of 400 amp capacity complete including dismentling air break gang operated switches verticalhorizontal mounted including insulator hand operating mechanism for replacement of brokenworn out components and insulators etc all as specified and directed, supply and fixing in repair triple pole double break central rotating banging type isolator horizontal mounting current rating up to 600 amps for 33 kv including post insulators accessories as per existing complete all as specified and as directed, ml for removing and taking out old stone aggreated any size clear all surface their after laying single layer of sand dust in 33 kv mrs yard 11 kv distribution sub station and before laying stone aggregate complete yard including spreading of anti vegetation chemical to prevent abnormal growth of grassbushes complete all as specified and as directed, ml for spreading and levelling evenly 40 mm graded stone aggregated at 33kv main receiving station 11 kv sub station complete all as specified and as directed, material and labour for laying trench cover on cable trenches as per existing at 33 kv11 kv mrs ward made out of rcc 124 type b0 125mm graded stone aggregate, ml lightning arresters expulsion type complete with all fittings transmission class discharge capacity 65 kilo amp suitable for 11000 volt complete all as specified and as directed, ml lightning arresters expulsion type complete with all fittings transmission class discharge capacity 65 kilo amp suitable for 33000 volt complete all as specified and as directed, material labour in repair of polymer lighting arrester high tension expluive type complete with all fitting transmission class diescharge capacity 65 kilo amp suitable for 11000 volts complete all as specified and as directed, supply fix testing current transformer ct of 33 kv single phase out door oil cooled ct ratio 100505 amps dual core - one for metering and other for protection having 16 va burdon and class 5p-10 protection and 05 metering complete all as specified and as directed, supply fix testing potential transformer pt of 33 kv single phase outdoor oil cooled pt ratio 33000v3110v3v class 10 having 100 va burdon complete all as specified and as directed, supply fix testing pt protection transformer for 11 kv indoor vcb draw out type 11 kv 11000110 v va-5 class 1 rated friquency 50 hz make- cgl approved vendor all as directed note- complete above said work will be carried out through authorised rep of cg, ml for structural ms frame work half round or other stock section including securing posts and stuts in fencing frame work for gates of substations base frame for equipments including securing bolts posts and struts in fencing including cutting and making shapes as desired drilled holes notching for wire etc flat iron fillets for securing wire mesh etc including all necessary drilled bolting or riveting etc and similar work confirming to fe-290 gde e-165 complete all as specified and as directed, sf mild steel screw boltmechine made with hexagonal or square head nexc 5cm but nexc 10 cm dia complete all as specified and as directed, ml for prepration of steel surface of one coat of red oxide and two coat of synthetic enamel paint any description n exc 10 cm in width or grith when unconnected with other painting or when painted in a different complete all as specified and as directed, attending the testing by authorised rep of oem of vcb for attending of servicing overhauling of 11 kv indoor vcb panel including breaker cgabbjyoti make at 3311 kv mrs at ge babina station and including following, supply only led indicating lamps any colour redyellowgreenblue universal voltage for vcb 11 kv of 630400 amps all as per sample complete all as specified and as directed, supply only trip circuit healthy push button with no contacts suitable for vcb 11000 volt of 630 400 amps all as per sample complete all as specified and as directed, supply only spring charging motor 230vac dc suitable for vcb 11000 volt of 630400 amps all as per sample complete all as specified and as directed, supply only limit switch suitable for vcb 11000 volt of 630 400 amps all as per sample complete all as specified and as directed, supply only microswitch assembly suitable for vcb 11000 volt of 630 400 amps all as per sample complete all as specified and as directed, supply only big gear assembly suitable for vcb 11000 volt of 630400 amps all as per sample complete all as specified and as directed, supply only small gear assembly suitable for vcb 11000 volt of 630 400 amps all as per sample complete all as specified and as directed, supply only tripping shaft assembly suitable for vcb 11000 volt of 630 400 amps all as per sample and complete all as specified and as directed, supply only closing shaft assembly suitable for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only segment gear assembly suitable for vcb 11000 volt of 630 400 amps all as per sample and complete all as specified and as directed, supply only pt fuse for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only spring charging handle for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only breaker control switch 4 passion for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only ctepoxy type ratio 300-15055a core 115 vaci05 core 2 15 vacl5p10 stc 263 ka 1 sec for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only ctepoxy type ratio 100-5055a core 115 vaci05 core 2 15 vacl5p10 stc 263 ka 1 sec for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only closing coil assembly 30vdc for vcb 11000 volt of 630400 amps all as per sample complete all as specified and as directed, supply only tripping coil assembly 30vdc for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only closing coil assembly 110vdc for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only tripping coil assembly 110vdc for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only plug sockect for vcb 11000 volt of 630400 amps as per sample and complete all as specified and as directed, supply only 8no8nc auxiliary switch for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only space heater 10080w for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only thermostat for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only hrc control fuse 2a 4a 6a 10a for vcb 11000 volt of 630400 amps all as per sample complete all as specified and as directed, supply only complete breaker mechanism assembly for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only onoff push button plate assembly for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only fuse base with carrier up to 32 a for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only timer for vcb 11000 volt of 630400 amps all as per sample complete all as specified and as directed, supply only anti pumping device for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only relay ammeter voltmeter fixing plates with powder coating paint siemens gray rl7032 for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only door knob for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only trip catch assembly for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only set of 06 sleeve for poles for vcb 11000 volt of 630400 amps all as per sample complete all as specified and as directed, supply only set of 06 isolating contacts for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only set of 03 vaccum intrruptor supporting insulators for vcb 11000 volt of 630400 amps all as per sample complete all as specified and as directed, supply only tcs auxiliary relay 24vdc for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed make- lt, supply only auxiliary switch 5 no5 nc for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed make- lt, supply only closing coil 30vdc for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only lugs ferules cable teis saddle base 12 sqmm 25 sqmm for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only hooter for vcb 11000 volt of 630400 amps all as per sample complete all as specified and as directed, supply only crc spray bottle for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only epoxy paint for vcb 11000 volt of 630400 amps all as per sample and complete all as specified and as directed, supply only 15 multistrandad flexible copper cable 1100v grey colour control wiring for vcb 11000 volt complete all as specified and as directed, ml for spring charging motor modification works under vcb 11000 volt of 630400 complete all as specified and as directed note- complete modification work will be carried out through authorised rep of cg, ml for modification works under vcb 11000 volt of 630400 to compatable new vcb trolly with existing vcb panel complete all as specified and as directed note- complete modification work will be carried out through authorised rep of cg, ml for modification fabrication work connection of 11 kv copper bus bar of suitable size suitable lenght as per menufacturer recommendations under vcb 11000 volt of 630400 including copper busbar its jointing and cover with reycam sleeves in existing vcb panel complete all as specified and as directed note- complete modification work will be carried out through authorised rep of cg, attending the testing by authorised rep of cg for servicingoverhauling of 11 kv rmu 4 way 6way 8way of make- lucyabbmegawin at differenet location under ge babina station complete all as specified and as directed for following, attending the testing by authorised rep of cg for servicingoverhauling of 33 kv cg abb areva make outdoor sf6vcb breakers at 3311 kv mrs at ge babina station all as specified and directed for following, supply only ratchet wheel assembly for 33kv vcb 1250 amp 25 ka as per existing sample complete all as specified and as directed, supply only closing latch assembly for 33kv vcbsf-6 breaker 1250630400 amp 263 ka as per existing sample complete all as specified and as directed, supply only tripping latch assembly for 33kv vcbsf-6 breaker 1250630400 amp 263 ka as per existing sample complete all as specified and as directed, supply only set up o ring for pole for 33kv vcbsf-6 breaker 1250630400 amp 263 ka as per existing sample complete all as specified and as directed, supply only dc auxiliary 30v dc contactor for 33kv vcb 1250630400 amp as per existing sample complete all as specified and as directed, supply only motor contactor 30v dc for 33kv vcb 1250630400 amp 263 ka as per existing sample complete all as specified and as directed, supply only limit switch for 33kv vcb 1250630400 amp as per existing sample complete all as specified and as directed, supply only closing coil assembly 30 v dc for 33kv vcb 1250630400 amp as per existing sample complete all as specified and as directed, supply only tripping coil assembly 30 v dc for 33kv vcb 1250 630400 amp as per existing sample complete all as specified and as directed, supply only spring charging motor 230 vacdc for 33kv vcb 1250630400 amp as per existing sample complete all as specified and as directed, supply only spring charging gear assembly for 33kv vcb 1250630400 amp as per existing sample complete all as specified and as directed, supply only small gear assembly for 33kv vcb 1250630400 amp as per existing sample complete all as specified and as directed, supply only anti pumping device for 33 kv vcb 1250 630400 amps all as per existing sample complete all as specified and as directed, supply only complete pole assembly 33 kv outdoor type all as per existing sample complete all as specified and as directed, supply only breaker charging complete mechanism 33 kv outdoor type all as per existing sample complete all as specified and as directed, testing of outdoor ct pt connection marshaling box with tbs channels for 33 kv vcb control connection complete all as specified and as directed, supply fixing installation and testing in repair power pack unit for battery backup 230 vac 30 vdc suitable for existing cgabb make indoor vcb panel as recommanded by oem complete all as specified and as directed, supply fixing installation and testing in repair power pack unit for battery backup 230 vac 110 vdc suitable for existing cgabb make indoor vcb panel as recommanded by oem complete all as specified and as directed, supply fixing installation and testing in repair 3 phase over current 01 earth fault relay in existing 11 kv indoor vcb panel with high set with idmt and inst characteristics having aux supply v of 20-110v dc rated volt 250 vac 30 or 110 vdc universal wide range as per site requirement complete all as specified and as directed make- cg model - cg14n or equevalent of abb seimens schneider note- i all necessary arrangement for fixingaccommodate new relays in exisitng 11 kv vcb panel including cuttingcasing control wiring will be included in quoated rate ii complete fixing installation and testing work of relay will be carried out through authorised rep of cg, supply fixing installation and testing in repair 3 phase over current 01 earth fault relay in existing 11 kv indoor vcb panel with high set with idmt and inst characteristics having aux supply v of 24 to 240 v acdc rated volt 250 vac 30 or 110 vdc universal wide range as per site requirement complete make- lt model - mc61a-nx cat no mc61anx4000 or equevalent of abb seimens schneider note- i all necessary arrangement for fixingaccommodate new relays in exisitng 11 kv vcb panel including cuttingcasing control wiring will be included in quoated rate ii complete fixing installation and testing work of relay will be carried out through authorised rep of cg, supply fixing installation and testing in repair rej601 feeder protection inrush current relay abb make in existing 33 kv and 11 kv indoor vcb panel with over current short circuit earth fault inrush current instantaneous protection features ct secondary 1 a 5a universal wide range auxiliary voltage universal acdc wide range site selectable range make- abb model rej601 or equevalent of seimens schneider note- i all necessary arrangement for fixingaccommodate new relays in exisitng 11 kv vcb panel including cuttingcasing control wiring will be included in quoated rate ii complete fixing installation and testing work of relay will be carried out through authorised rep of cg, supply fixing installation and testing in repair aegis a131d1 feeder protection inrush current relay cg make in existing 33 kv and 11 kv indoor vcb panel with over current short circuit earth fault inrush current instantaneous protection features ct secondary 1 a 5a universal wide range auxiliary voltage universal acdc wide range site selectable range make- cg model no aegis a131d1 or equevalent of abb seimens schneider note- i all necessary arrangement for fixingaccommodate new relays in exisitng 11 kv vcb panel including cuttingcasing control wiring will be included in quoated rate ii complete fixing installation and testing work of relay will be carried out through authorised rep of cg, supply fixing installation and testing in repair wtioti alarm relay for transfomer protection in existing 33 kv control panel as sample complete all as specified and as directed make- cg cs abb seimens schneider note- i all necessary arrangement for fixingaccommodate new relays in exisitng 11 kv vcb panel including cuttingcasing control wiring will be included in quoated rate ii complete fixing installation and testing work of relay will be carried out through authorised rep of cg, supply fixing installation and testing in repair wtioti trip relay for transfomer protection in existing 33 kv control panel as sample complete all as specified and as directed make- cg cs abb seimens schneider note- i all necessary arrangement for fixingaccommodate new relays in exisitng 11 kv vcb panel including cuttingcasing control wiring will be included in quoated rate ii complete fixing installation and testing work of relay will be carried out through authorised rep of cg, supply fixing installation and testing in repair 86 master trip relay in existing 33 kv or 11 kv indoor vcb control panel with 30 vdc complete all as specified and as directed make- cs cg abb seimens schneider note- i all necessary arrangement for fixingaccommodate new relays in exisitng 11 kv vcb panel including cuttingcasing control wiring will be included in quoated rate ii complete fixing installation and testing work of relay will be carried out through authorised rep of cg, attending and testing by service engineer to carry out priodical on site testing of 3311kv 02 nos 5 mva 01 nos 125 mva transformer by authorised agency at 3311 kv mrs at ge babina station are as under - a ir value test b ratio test c magnetic core balance test d open circuit test e vector group test f short circuit test g no load current test note- a all necessary arrangement at the site of testing quipment for the testing will be responsibility of the contractor and rate for the same will be included in quoated rate b after the testing of transformer test report will be submitted to the department necessary recommandation suggestion also be mentioned in report if any, sf in repairreplacement voltmeter digital type with selector switch of size 96x96mm 01 phase rating complete all as specified and as directed make- elmeasure conzervelt, sf in repairreplacement voltmeter digital type with selector switch of size 96x50mm 3 phase 03 wire rating complete all as specified and as directed make- elmeasure conzervelt, sf in repair replacement ammeter digital type with selector switch of size 96 x 96 mm 01 phase rating complete all as specified and as directed make- elmeasure conzervelt, sf in repair repalcment ammeter digital type with selector switch of size 96 x 50 mm 3 phase 3 wire rating complete all as specified and as directed make- elmeasure conzervelt, sf in repair replacement multifunctional meter of size 96 x 96 mm rating complete all as specified and as directed make- elmeasure conzervelt, supply fixed installed and testing in repair replacement em7230 demand controller cl 10 rs485 in existing 11 kv indoor vcb panel complete all as specified and as directed make- schneiderltabb, sf in repair breaker control switch trip-neutral-close tnc with 2no 2nc spr rtn for 33 kv control panel cat part no 72009 lt, ml earth continuity conductor or main earthing lead 32 x 6 mm galvanized iron strip fixed to wall on batten or recess or chases or burried in ground or drawn in conduit pipe or fixed to poles or any other indicated situation for loop earthing etc complete all as specified and as directed, ml framed work as in doors or gates of angle or other section with gusset plates rails braces etc complete drilled for fixing of steel heeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering running rails and guides and hanging also fastening and fixing complete fe 410 wgde e-250 complete all as specified and as directed, sf in repair repalcement for led glow sign board of size 12m x 2m made out acrylic sheet 3 mm dia with acp sheet in front of it placed covered with cgi in all side 26 gauge sheet with led modular lights inside duly complete including fixed on suitable steel pole and with suitable supporting frame or fixed on wall and fixing arrangement lighting connection with suitable copper wire complete all as specified and as directed, sf in repair repalcement for led glow sign board of size 12m x 3m made out acrylic sheet 3 mm dia with acp sheet in front of it placed covered with cgi in all side 26 gauge sheet with led modular lights inside duly complete including fixed on suitable steel pole and with suitable supporting frame or fixed on wall and fixing arrangement lighting connection with suitable copper wire complete all as specified and as directed, sf in repair repalcement for led glow sign board of size 15m x 3m made out acrylic sheet 3 mm dia with acp sheet in front of it placed covered with cgi in all side 26 gauge sheet with led modular lights inside duly complete including fixed on suitable steel pole and with suitable supporting frame or fixed on wall and fixing arrangement lighting connection with suitable copper wire complete all as specified and as directed, sf in repair repalcement for led glow sign board of size 15m x 4m made out acrylic sheet 3 mm dia with acp sheet in front of it placed covered with cgi in all side 26 gauge sheet with led modular lights inside duly complete including fixed on suitable steel pole and with suitable supporting frame or fixed on wall and fixing arrangement lighting connection with suitable copper wire complete all as specified and as directed, sf in repair repalcement for led glow sign board of size 6m x 07m made out acrylic sheet 3 mm dia with acp sheet in front of it placed covered with cgi in all side 26 gauge sheet with led modular lights inside duly complete including fixed on suitable steel pole and with suitable supporting frame or fixed on wall and fixing arrangement lighting connection with suitable copper wire complete all as specified and as directed, sf retro reflective sign board made up with 12 mm thick stainless steel sheet of which both sides shall be fully covered with high intensity prismatic hip retro reflecting sheeting of approved specification asper morth having approved message matter and base fully processed by pressure sensitive equipment of approval brand avery dennison3 m fixed hanging on sub station fencing on stainless steel frame makeup of ss as described complete all as specified and as directed, material and labour for repairmaint of trolly of trolly mounted transformer including oiling greasing of moving parts checking repairing make fuctional of punture tyre of trolly and painting of complete trolly with synthetic enamel paint with existing pattern or as directed after cleaing of oily surface of trolly complete all as specified and as directed, material and labour for preparation of old rusted steel surfaces of complete 33 kv yard including ht 2 pole 4 pole structure of 11m length out door ctpt steel structure outdoor vcb steel structure islolator do fuse structure etcas per the existing pattern above the pcc coping with two coat of aluminium paint on complete steel structure and pcc coping painted by applying one coat of synthetic enamel paint complete all as specified and as directed, 12 core 25 sqmm, 6 core 25 sqmm, 4 core 25 sqmm, supply and fix in replecemnet of automatic fcbc and trickle battery charger cum tripping unit 30 vdc 165 ah for 33 kv and 11 kv protection equipment with comprising of following- electrical specification a ac input voltage 230 v range 180v to 264 v b ac input frequency normal 50 hz - 3 hz c dc output volt normal for load 30vdc d 20 amps total current output capacity battery type- a lead acidsmfvlrs b indications for mains supply float charging boost charging ac volt meter dc volt meter dc fail ac fail alarm dc amp meter for load dc amp meter for charging protection- a circuit breaker for mains incoming supply circuit breaker for output load over load protection ac short circuit protection battery reverse polarity low high volatage protection housing and enclosure- a heavy duty sheet steel enclosure finished with powder coated paint floor mounted operation a automannual control cccv close loop rectifier full wave half controlled bridge element fuse protection for rectifier element fuse failsure relay dc earth fault relay alarm annunciation dual float charger option note- i the internal control wiring of battery charger should ber carried out by susing suitable size of multistranded frls copper conductor cable with lugs ii all necessary connection battery bank to vcbs should be carried out by using suitable size of copper wire complete, s f in repair of vrla battery bank 30v 02 v x 15 nos cell 100 ah 02 v with vrla battery rack including connection with necessary suitable copper cable or bus bar strip complete all as specified and as directed make - exideamronluminous, testing of earth resistance of existing earth pit as and when required as per is 3043 1987 ssr part-i para 19146 using earth resistance testing equipments as directed and producing the test result for recording purpose complete all as specified and as directed note - 1the contractor shall be asked to carry out the earth test as completely 2 testing of each earth pit shall be measured as one unit 3all test result to be entered in a register properly bound and covered and to be submitted to the engr-in-charge during payment 4 for the purpose of testing contractor shall supply all equipments and apparatusinstruments at his own cost without any extra claim, testing of battery of existing battery bank and battery charger as and when required using testing equipments if required changing of terminals greasing of terminals and pouring of distilled water as directed and producing the test result for recording purpose complete all as specified and as directed by the engr in charge note 1the contractor shall be asked to carry out the battery test as completely 2 testing of all battery in the battery bank shall be measured as one unit 3 all test result to be entered in a register properly bound and covered and to be submitted to the engr-in-charge during payment 4 for the purpose of testing contractor shall supply all equipments and apparatusinstruments at his own cost without any extra claim, testing repairing and making functional of existing 11 kv ht capacitor bank make abb including all necessary spare parts of capacitor as required for making functional of ht capacitor bank complete all as specified and as directed note- i reparing work of ht capacitor bank will be carried out through authorised and specialised agency of similar field ii submit the test report to department before starting and after completion of repair work with functioning of ht capacitor bank and submit their recommendations if any for further improvement of the system iii 11 kv ht capacitor if required for replacement shall be measured and paid separately under respective item of schedule here in after as supply only, supply only do fuse elementwire suitable for 33 kv 5 to 100 amp, supply only do fuse elementwire suitable for 11 kv 5 to 200 amp, s f abc power portable wheeled extinguishers with class a b c and electically started fires packed with 50 and 90 map concentration state of the art pressure gauge quick powerful and reliable fire fighting system with 25 kg ms sp red make cease fire cat part no cf-001167 or equivalent to other make complete all as specified and as directed, s f abc power portable wheeled extinguishers with class a b c and electically started fires packed with 50 and 90 map concentration state of the art pressure gauge quick powerful and reliable fire fighting system with 50 kg ms sp red make cease fire cat part no cf-001167 or equivalent to other make complete all as specified and as directed, s f power portable class ceasefire multimax state of the art pressure gauge quick powerful and reliable fire fighting system with 09kg make cease fire or equivalent to other make complete all as specified and as directed, refilling of dry chemical powder extinguisher stored pressure type with change of nozzle pipe pressure gauge 09 kg complete all as specified and as directed

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

78 |Bid Value:₹ 49.00 Lakh |EMD:₹ 98.00 K |30-09-2026 11 Days Left|T247 ID-104166265

ge elect/token-43/2026-2027 - repair /maint of vcb s rmus distribution transformers ht electrical distribution system including repair calibration of relays meters and other allied works at nsb iii panchwati 1 5 gr dcn palam tigris 69 med regt 512 lt ad

New Delhi, Delhi, India

Matching BOQ Items

ml for disconnecting carefully electrical connection from both ht lt primary secondary sides of the transformer keeping them at safe side and taking out the transformervoltage stabiliser indoor outdoor type of capacity 630 kva to 800 kva 11 kv433kv step down any make for carrying out complete overhauling which shall comprise of the following- a ml for lifting transporting handling the transformer to workshop and back to the original location after complete overhauling or one location to another location where required b conducting the tests on core and windings as per is like ratio magnetic imbalance short circuit etc in presence of engr-in-charge and test results shall be signed both by the contractor and engineer -in-charge and kept on record note- i any damage to insulators bushes windings etc while in the custody of the contractor shall be made good at no extra cost to department the serviceability of the transformer shall be checked and confirmed by the contractor before taking into his custody ii ml for rewinding re-insulation of ht lt primary secondary coils bushes studs transformer oil cable box replacement of bucholtz relay mog if any etc will be measured and paid separately, all as per item no 1 herein before but transformervoltage stabiliser indoor outdoor type of capacity up to 400 kva to 500 kva complete all as specified and directed by engr-in-charge, all as per item no 1 herein before but transformervoltage stabiliser indoor outdoor type of capacity up to 100 kva to 315 kva complete all as specified and directed by engr-in-charge, ml for filtration of transformer oil of transformersservo voltage stabilizer installed at various locations to achieve di-electric strength not less than 60 kv at 25mm gap as per relevant is with portable filtration plant testing of the oil for the di-electric strength before filtration and after filtration complete all as specified and directed by engr-in-charge, supply and topping up of transformer oil with di-electric strength not less than 60 kv in to the conservator tank body tank of the transformersservo voltage stabilizer etc at various locations complete all as specified and directed by engr-in-charge make power oil transol sabitha chemicals as approved by ge, ml for rewinding of distribution transformersavr of capacity 100 kva to 800 kva type by winding the low insulationdefective coils of primary coil ht coil with new copper wire as per is of same gauge and existing size together with new insulated materials bracings before placing in to the transformer and assembling the coil with new insulation and fitting the coils in the chamber testing and commissioning the transformer and recording the test results complete all as specified and directed by engr-in-charge note ml for re-insulation of serviceable coils will be measured paid separately under relevant items, ml for rewinding of distribution transformers of capacity 100 kva to 800 kva type by winding the low insulated defective coils of secondary coil lt coil with new copper wire as per is of same gauge and existing size together with new insulated materials bracings before placing in to the transformer and assembling the coil with new insulation and fitting the coils in the chamber testing and commissioning the transformer and recording the test results complete all as specified and directed by engr-in-charge note ml for re-insulation of serviceable coils will be measured paid separately under relevant items, ml for re-insulating windings of distribution transformers of capacity 100 kva to 800 kva size type by strip opening of ht lt coils ie primary secondary coils from core assembly safely unwinding the ht lt coils ie primary secondary coils complete removing the old defective insulation paper and replacing with new dpc insulation to the copper conductor re-varnishing of the windings with super varnish including heating drying backing complete carefully and thoroughly inside the heating chamber at suitable temperature to obtain required value of insulation resistance etc all as per is 1986-87 and complete all as specified and directed by engr-in-charge, 500 kva to 800 kva, 100 kva to 400 kva, 500 kva to 800 kva, 100 kva to 400 kva, shifting the transformeravr 100 kva to 800 kva from existing site to another site by dismantling of ht and lt cables jumpers and bus bars including lt busbar cable boxes and close the transformers for loading into vehicle with the help of crane transportation to another site unloading cable connections both ht and lt testing and commissioning complete all as specified and directed by engr-in-charge, ml for replacement of silica gel breather assembly complete with breather unit and silica gel including connecting with proper necessary gaskets if necessary including removing the unserviceable breather assembly complete all as specified and directed by engr-in-charge, ml for replacement of gun metal drain valves of transformers of following capacities including dismantling old one complete all as specified and directed by engr-in-charge make - upadhyay leader zoloto, supply and fixing in repairs off load tap changer assembly suitable for any make with 7 tapping position including opening top cover conservator etc complete all as specified and directed by engr-in-charge, supply and replacement of wti winding temperature indicator of following distribution transformers including dismantling old one complete all as specified and directed by engr-in-charge, 500 kva to 800 kva, 100 kva to 400 kva, 500 kva to 800 kva, 100 kva to 400 kva, ml for replacement of oil gauge glass with gaskets of the following capacity distribution transformers of any makesizetype including dismantling old one complete all as specified and directed by engr-in-charge, 500 kva to 800 kva, 100 kva to 400 kva, ml for replacement of oti oil temperature indicator of following distribution transformers including dismantling old one complete all as specified and directed by the engr-in-charge, ml for replacement of drain plugs to valvesconservator caps of the sizes 34 1 15 valves and plugs of 100 kva to 800 kva capacity distribution transformers of any makesizetype all as directed including dismantling old one complete all as specified and directed by the engr-in-charge, supply and laying of graded coarse aggregate of size 20 mm dia size upto height of 010 mtr in outdoor sub-station yards including surface dressing nexc 05 cm deep and removing debris to a distance nexc 50 m before laying of sand complete all as specified and directed by the engr-in-charge note punned thickness will be measured and paid separately for sand, material labour for excavation in trenches not exceeding 15 metre wide not exceeding 15 meter in depth for foundation laying of cable or pipe where provided for protection of cable or fixing with poles and stays and getting out in any type of soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and directed by the engr-in-charge, material labour for returning filling in including spreading levelling watering and well ramming soil in layers not exceeding 25 cm thick complete all as specified and directed by the engr-in-charge, material labour for removal excavated material ie soil from site to a distance n exc 50 mtrs away and depositing where directed at a level n exc 15 mtr above the starting point complete all as specified and directed by engr-in-charge, material and labour for river washed and screened dry sand for filling in trenches below and around underground cables for cushioning of cables etc complete all as specified and directed by the engr-in-charge note measurement shall be taken after punning down, supplying and laying reinforced precast concrete cable cover class hv type 1 flat size 300mmx 180mm x 40mm laid along alignment of cable as protection to cable in trenches complete all as specified and directed by engineer-in-charge, ml for gi pipe light grade 80 mm dia for cable protection on road crossings plinth protection with fixed to the pole wall etc suitable fittings for cable protection, testing the cables with high voltage dc testing machine and locating the fault in the cables by fault locating machine to pin point exact position of fault disconnecting faulty 11 kv ht cables of different sizes from both ends removal of fault re-connections and testing of cables after removal of fault complete all as specified and directed by the engr-in-charge note a 11 kv ht cable joints shall be measured and paid for separately under respective items of schedule b retrieved old serviceable cable cover will be laid in trenches for cable protection if extra pcc cover and sand required at site shall be measured and paid separately under respective items of boqs c excavation and earth work will be measured and paid for separately under respective items of schedule, ml cable jointing kit for 11 kv earthed grade xlpe cable for indoor end termination heat shrinkable type joint complete with jointing material and accessories suitable for size 3 core 120 to 185 sqmm including testing after jointing complete all as specified and directed by the engr-in-charge, ml cable jointing kit for 11 kv earthed grade xlpe cable for indoor end termination heat shrinkable type joint complete with jointing material and accessories suitable for size 3 core 240 to 300 sqmm including testing after jointing complete all as specified and directed by the engr-in-charge, ml cable jointing kit for 11 kv earthed grade xlpe cable for outdoor end termination heat shrinkable type joint complete with jointing material and accessories suitable for size 3 core 120 to 185 sqmm including testing after jointing complete all as specified and directed by the engr-in-charge, ml cable jointing kit for 11 kv earthed grade xlpe cable for outdoor end termination heat shrinkable type joint complete with jointing material and accessories suitable for size 3 core 240 to 300 sqmm including testing after jointing complete all as specified and directed by the engr-in-charge, ml cable jointing kit for 11 kv earthed grade xlpe cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armored aluminium conductor cable of size 120 to 185 sqmm including testing after jointing complete all as specified and directed by the engr-in-charge note earth work will be measured and paid separately, ml cable jointing kit for 11 kv earthed grade xlpe cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armored aluminium conductor cable of size 240 to 300 sqmm including testing after jointing complete all as specified and directed by the engr-in-charge note earth work will be measured and paid separately, supply laying testing commissioning of xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cables heavy duty with aluminium conductor 11000 volts grade earthed of size 3 core 95 sqmm complete in trenches ducts on pole etc complete all as specified and directed by the engr-in-charge, supply laying testing commissioning of xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cables heavy duty with aluminium conductor 11000 volts grade earthed of size 3 core 120 sqmm complete in trenches ducts on pole etc complete all as specified and directed by the engr-in-charge, supply laying testing commissioning of xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cables heavy duty with aluminium conductor 11000 volts grade earthed of size 3 core 185 sqmm complete in trenches ducts on pole etc complete all as specified and directed by the engr-in-charge, supply laying testing commissioning of xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cables heavy duty with aluminium conductor 11000 volts grade earthed of size 3 core 240 sqmm complete in trenches ducts on pole etc complete all as specified and directed by the engr-in-charge, supply laying testing commissioning of xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cables heavy duty with aluminium conductor 11000 volts grade earthed of size 3 core 300 sqmm complete in trenches ducts on pole etc complete all as specified and directed by the engr-in-charge, servicing inspecting checking overhauling cleaning by using of blower lubrication greasing and carrying out preventive maintanance of rmu capacity 11 kv 250350 mva including calibrating the relay by conducting secondary injection tests and rmu in serviceable condition testing and commissioning complete all as specified and directed by the engr-in-charge notes i the rate quoted shall be deemed to include for necessary tp nuts bolts washers gasket insulation tape compound painting of rmu panels with approved colour including lettering details all as per exisitng etc, self powered relay with oc sc ef protectionrelay should have a front usb port for laptop interface lcd display 10 event records 5 fault records min 2 setting group and keypad for setting parameters for the relay suitable fo rmu, ct having ratio 100-501-1a for class - 10 25va for metering and class 10p10 25va for protection- 1set, cable termination bushing suitable for upto 1 run 3cx185 sq mm xlpe cable- 1set, cable termination cover boots push on type -1set, three phase ryb indicating lamps - 1set, 11kv230v ac 1kva control transformer - 1no, battery and battery charger 12ah ip-230v ac op - 24v dc - 1no, spring charging motor, ml of notice plate of 16 mm thick mild steel sheet vitreous enameled white with letters figures and conventional skull and bones in signal red colour and fixed with ms clamps bolts and nuts of approved size for ht 11 kv of size 25 x 20 cm, disconnection and taking out the idmt numeric microprocessor based relay of any type of any make from 11 kv ht panel cleaning the contacts calibrating the relay by conducting secondary injection tests checking of current transformer rectification of defects in control wiring for proper tripping of circuit breakers through cts and relay and tripping coils adjustmentsetting to plug and time multiplier settings of the relay to achieve the discrimination in tripping tunesynchronise upstream breaker relay settings re-installation of relay testing commissioning etc complete all as specified and directed by the engr-in-charge note the contractor has to arrange necessary testing kits testing equipments tools etc rental rates for the testingcalibration kits connected equipments are deemed to be included in the quoted rate testing tuning shall be carried out in the presence of representative of the department to the satisfaction of the department, taking down ht switch gear vacuum circuit breaker at sub stn of capacity 11 kv 250350 mva comprising of repairs complete overhaulingservicing carrying out preventive maintenance alongwith testing of breakers by current injection test and refixing the same after repairs overhauling note i the servicing includes for busbar duct chamber cable alleys and connecting accessories ii the rate quoted shall be deemed to include for necessary tp nuts bolts washers gasket insulation tape compound painting of vcb panels with approved colour including lettering details all as per existing etc to put in to the vcbs and panels in serviceable condition testing and commissioning all as specified and as directed by the engineer-in-charge iii major spares like breaker bushings vacuum interrupter assly busbar spout busbar spout connections circuit spoutcircuit spout connectionsbuffer fixed contacts moving contacts tank asslybarriers solenoid spares dependentspring mechanism motor mechanism trip unit etc will be measured and paid separately under relevant items of schedule a however the rate quoted shall be deemed to include for any other minor spares require replacement iv the servicing shall be carried out by auhtorised agencyrep of oem of vcb, supplying and laying as replacement in sub station 33 to 11 kv electrical insulation mat of size 5 mtr x 1 mtr x 25 mm thick confirming to is 15652 2006 complete all as specified and directed by engineer- in- charge, platform - ml for brick masonary using sub class b brick platform of size 3m x 3m x 1m height built in cm 14 complete incl all necessary excavation earth work pcc 148 type d-2 in foundation 15 mm thick rendering in cm 16 on sides and top of the brick work up to 150 mm below ground level incl sf of 02 nos ms channels of size ismc-100 for balancing of transformer embedded in pcc 124 type b-1 up to 100 mm thick rcc 124 with 10 mm steel bar placed 100mm cc including provn of steps on one side complete all as specified and directed by engineer- in- charge, fencing - ml for perimeter fencing of size 8mx4mx2m as per site condition having ms work of angle iron for post and struts of fencing around the transformer plinthsubstationlt panels etc drilling holes flat iron fillet for securing wire mess by welding to angle iron frame and framed work as in doorgate of angle iron and wiremeshdoor to be fixed by 03 nos 100mm long hinges and one sliding door bolt of 300mm long for locking arrangement complete all as specified and directed by engr- in- charge details are as follows- a angle iron post to post distance maintained not more than 02mtr size of angle shall be 40x40x5mm angle iron shall be embedded in natural ground not less than 090 m deep b ms wire 75x75mm mesh 315 mm dia 2mtr height and shall be fixed to post with flat iron 32 x 6 mm fillet with two coats of synthetic enamel paint over a coat of red oxide primer c cement concrete type d-2 148 using grade crushed stone aggregate for mass concrete foundation d brickwork with subclass b bricks straights or curved on plane exc 6m mean radius built in cement mortar 16 complete for toe wall along the perimeter fencing the toe wall shall be one brick thick 30cm high 15cm above gl and 15cm below gl on 75mm thick pcc lean concrete e the exposed surfaces of brickwork shall be rendered 15mm thick in cm 14 finished fair and even without using extra cement f the steel gate shall be of size 100m x200 m fabricated from angle iron 40x40x5 mm frame and 12x12 mm square guard bars g all the exposed surfaces of steel shall be painted with two coats of synthetic enamel paint over one coat of red oxide primer h dry stone aggregate of size 40mm spreaded leveled compacted up to 100mm thick j necessary excavation and earthwork shall be included in the quoted rate, m l for painting of vcb with si-coat 570 rtv silicone high voltage insulator coating solution prior to cleaning the complete paint surface with silica paper blower heat blower complete all as specified and directed by the engr-in-charge, supply of ht insulation tape complete all as specified and directed by the engr-in-charge

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

79 |Bid Value:₹ 59.92 Lakh |EMD:₹ 1.15 Lakh |02-10-2026 13 Days Left|T247 ID-104020063

repair and maint of transformer vaccum circuit breaker servo voltage stabilizer and other ht panel ct/pt and ht cable ht joint and other misc connected workt at bhdc under ge (east) delhi cantt-10

New Delhi, Delhi, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

80 |Bid Value:₹ 49.96 Lakh |EMD:₹ 99.92 K |01-10-2026 12 Days Left|T247 ID-104049495

repair maint servicing of transformers of various capacities along with all the accessories, swithgears, structure works and miscellaneous connected works in age em ii under ge (c) khadki

Pune, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

81 |Bid Value:₹ 49.96 Lakh |EMD:₹ 99.92 K |05-10-2026 16 Days Left|T247 ID-104207669

repair/maint/servicing of transformers of various capacities along with all the accessories, swithgears, structure works and miscellaneous connected works in age e/m-ii under ge (c) khadki

Pune, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

82 |Bid Value:₹ 37.61 Lakh |EMD:₹ 76.00 K |03-10-2026 14 Days Left|T247 ID-104286857

repair, replacement of ht poles, ht oh lines, ht ug cables, transformers, god, vcb and misc e and m work at mic and s under ge (s) ahilyanagar - as per tender documents

Ahmednagar, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

83 |Bid Value:₹ 35.00 Lakh |EMD:₹ 70.00 K |25-09-2026 6 Days Left|T247 ID-104236141

comprehensive maint of transformer ht cable vcb 4 pole structure panels and allied e/m items at est no.22 area of age (i) chakrata under hq cwe dehradun - comprehensive maint of transformer ht cable vcb 4 pole structure panels and allied e/m items at est no.22 area of age (i) chakrata under hq cwe dehradun

Dehradun, Uttarakhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

84 |Bid Value:₹ 25.98 Lakh |EMD:₹ 52.00 K |01-10-2026 12 Days Left|T247 ID-104228989

repair/replacemet transformer, ht cable and overhead line and e/m installation at ,south camp, north and mutaga campat ats belagavi

Belgaum, Karnataka, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

85 |Bid Value:₹ 25.00 Lakh |EMD:₹ 50.00 K |19-09-2026 Ending Today|T247 ID-103785731

corrigendum : maintenance and upkeep of ht distribution system, transformer and allied works under ge (n) mumbai

Mumbai, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

86 |Bid Value:₹ 23.29 Lakh |EMD:₹ 46.58 K |19-09-2026 Ending Today|T247 ID-103850329

corrigendum : repair, replacement of ht god, vcbs, transformers, servo stebilizers and other allied works at jutogh, shimla, sanjauli, chail and kelvin groove under ge (i) jutogh - repair, replacement of ht god, vcbs, transformers, servo stebilizers and other allied works at jutogh, shimla, sanjauli, chail and kelvin groove under ge (i) jutogh

Shimla, Himachal Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

87 |Bid Value:₹ 19.99 Lakh |EMD:₹ 40.00 K |25-09-2026 6 Days Left|T247 ID-104251965

repair/ replacement of ht cable network, vcb, transformers, god and other connected accessories at mil stn gaya under ge gaya

Gaya, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

88 |Bid Value:₹ 18.00 Lakh |EMD:₹ 36.00 K |19-09-2026 Ending Today|T247 ID-103849273

corrigendum : repair and maint of ht lines, ug cables, transformers and allied wokrs of various units at bhimbat, thasgam and drass under ge kargil

Kargil, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

89 |Bid Value:₹ 15.00 Lakh |EMD:₹ 30.00 K |03-10-2026 14 Days Left|T247 ID-104246996

comprehensive maint of transformer, vcb panels, voltage stabilizers and rmu including allied items at areas under age br alwaye

Ernakulam, Kerala, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

90 |Bid Value:₹ 12.97 Lakh |EMD:₹ 25.94 K |28-09-2026 9 Days Left|T247 ID-103948876

corrigendum : ca no.cwe bly/ge (e)/112 of 2026- 2027repair/ replacement and maint of external elect, repair/ maint to transformer replacement of parts alongwith allied services for ht distrubution system at rts and depot hempur under ge (east) bareilly

Udham Singh Nagar, Uttarakhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

91 |Bid Value:₹ 15.00 Lakh |EMD:₹ 30.00 K |23-09-2026 4 Days Left|T247 ID-104163753

repair/maint/servicing and preventive maint of 33 kv mrs switch yard, 33 kv breakers, vcbs, power transformers and calibration of relays of control panels, earthing of switch yards plants and eqpt and allied works at ayodhya cantt under age (i) ayd

Faizabad, Uttar Pradesh, India

Matching BOQ Items

servicing calibration and complete overhauling of 33 kv ht breaker vacuum type sf6 gas operated breaker of 1600 amp rating outdoor type mounted in 33 kv switch yard of existing make ie crompton greaves typemodecapacity by taking out 33 kv trolley from ht panel after switching off electric supply checking of all mechanical electrical control system for proper functioning eg spring charge system triping system remote operation indication system upward-downwardin-out movement of ht 33 kv breaker trolley etc including diassembling of operating mechanism parts well cleaning with petrol and crc-226 and replacing unserviceable spare parts reassembling of parts including well cleaning the complete panel board main busbar decarbonizing all joints busbar cts pts spouts metal parts applying the proper lubrication greasing with ap-3 grease and making 33 kv breaker perfect operating in manual and electric mode and calibration checking of indoor control panel of 33 kv circuit breaker by chechingh of tripping system through idmt over current and earth fault relay at plug setting through primary current injection method to ensure proper function of trip coil control circuit etc during fault condition setting by expert from authorised engineer and agency of authorised company of circuit breaker including submission of calibration certificate complete all as specified and directed note- replacement of unsv spare parts required to make 33 kv circuit breaker functional will be measured and paid separately as supply fixing under respective items, sf tnc control switch complete all as specified and directed, sf panel heater thermostat switch complete all as specified and directed, sf closing coil complete all as specified and directed, sf auxillary relay for buchholz relay oil temp winding temp trip 24110v dc as per exsting complete all as specified and directed, sf master relay 24110v dc as per existing complete all as specified and directed, sf remote local switch as per exsting complete all as specified and directed, supply fixing connecting and testing spring charging motoruniversal motor for outdoor type 33 kv vcb operated on 230 volts ac dc with charging time less than 15 sec of approved rating complete all as specified and directed by eic make - delco or equivalent make as approved by age i, supply and fixing of 33 kv 50 hz single phase oil filled inductive potential transformer outdoor type ratio - 33sqrt3110sqrt3 two secondary windings voltage factor - 12 continuous 15 for 30 sec creepage 900 mm windding - 1 class-10 100 va suitable for 33 kv complete all as specified and directed by engr-in-charge, sf in replacement vaccum interrupter unit of 33 kv out door type circuit breaker complete with insulator and assembly 630 amps rating all including assembling testing and commissioning at site complete all as specified and directed, supply and fix in replacement auxilary relay 110-250 volt dc suitable for over current earth fault switch gear protection complete all as specified and directed make- alsthom model no- vaa21zg8502fm or technocommercialy equivalent as approved by agei, supply and fix in replacement of 33 kv numerical 3 phase over current 1 earth fault switchgear protection relay with instantaneous high set and programmable output to simplify feeder protection wiring etc complete and testing on completion make- crompton model no cgl14c or technocommercialy equivalent as approved by agei, supply and fixing testing commisioning of electro mechanical type under overvoltage protection relay for 11 kv of make- alstom or equivalent make including neccesary wiring complete all as specified and directed note all tp accesories for testing is carried out by contractor and no extra payment to be done for testing, supply and refilling of sf6 gas suitable for ht 33 kv breaker complete all as specified and directed, sf in replacement indication lamp led type red or yellow or green or blue colour suitable for 24 v to 100 volts dc as required at site complete all as specified and directed by eic, supply and fix in repair ampare meter ammeter with digital display suitabale for measuring 33 kv electrical parameters fixed in existing panel board etc complete all as specified and directed make- secureaeschneider, supply and fix in repair voltmeter with digital display suitabale for measuring 33 kv electrical parameters fixed in existing panel board etc complete all as specified and directed make- secureaeschneider, sf in repair of strip type heater 4060 watt approx 46 in length including replacement of burnt internal wiring thermostat cut out complete all as specified and directed, ml for repair testing of control cablewiring between 3311 kv vcbs and power transformers including replacement of unserviceable and damaged cablewire with suitalbe size with connector and thimble complete all as specified and directed note control cable made up of copper will be measured and paid separately, sf in replacement of us control cable with copper conductor pvc insulated sheathed armoured of size 15 sqmm 8 core complete all as specified and directed, sf in replacement of us control cable with copper conductor pvc insulated sheathed armoured of size 15 sqmm 4 core complete all as specified and directed, servicing and maintenance of floating cum boosttrickle battery charger bank cum tripping unit for properly working on input voltage 230 v ac and output voltage 24 v dc 120 amp including replacement of us indicating lamp and meter complete all as specified and directed, supply fixing in replacement of rechargeable sealed lead acid battery maintenance free of capacity 2 volt 100 ah for breaker panel charger to provide 24 v dc supply to 33 11 kv vcbs complete all as specified and directed, servicing calibration and complete overhauling of oltc on load tap changer of 3150 kva 33kv11kv transformer of make crompton greaves after switching off electric supply checking of all mechanical electrical control system for proper functioning eg spring charge system triping system remote operation indication system upward-downwardin-out movement of tap changing mechanism oil level and winding condition heater assembly gears movements etc including diassembling of operating mechanism parts well cleaning with petrol and crc-226 and replacing unserviceable spare parts reassembling of parts including well cleaning the complete decarbonizing all joints busbar cts pts spouts metal parts applying the proper lubrication greasing with ap-3 grease and making oltc perfect operating in manual and remote control mode and calibration checking of indoor control panel rtcc remote tap changer control panel by checking of tripping system and wiring of tap changer on remote and manual mode for increace of tap and decrease of tap positionsthrough avrautomatic voltage regulating relay relay and to ensure proper function of tap changing mechanism by expert from authorised engineer and agency of authorised company of circuit breakerand transformer including submission of calibration certificate complete all as specified and directed note- replacement of spare parts required to make 33 kv oltc of 3150 kva transformer in functional condition will be measured and paid separately under respective items, supply fixing and testing of automatic voltage regulating avr relay control assembly work on aux supply 90v-260v acdc and pt supply -110 volt complete of on load tap changer control rtcc remote tap changer control panel of 3150 kva 33kv11kv transformer of make cromton greaves complete all as specified and directed, servicing and maintenance of three phase induction motor of capacity 13 hp 415 volts 50 hz along with servicing of gear sets used in oltc of 3150 kva transformer alongwith servicing of mechanical movable parts and accessories of tap changing mechanism on manual and remote mode including checking of contactors fuses and thermostatswithces complete all as specified and as directed, sf in replacement pin type porcelain vitreous white brown or green insulator including one galvanised mild steel spindle two galvanised iron washers and one galvanised iron nut 150mm height 150mm dia for 33000 volts grade complete all as specified and directed, sf in replacement ht 33 kv post insulator including fixing arrangements complete all as specified and directed, ml for disc type insulator porcelain vitreous in single disc assy for tension with tension clamps for conductors working pressure 33000 volts of specified size complete all as specified and as directed, supply and install ht 33 kv630 amp ht bushing insulator including fixing arrangements for 315 mva transformer complete all as specified and directed, ml in replacement spindle for pin insulator suitable for 33000 volts grade complete all as specified and as directed by engr-in-charge, ml for servicing repairs to air-break switch isolator off load rotating type 33 kv 800 amps to 1250 amps capacity with proper alignment of isolator rotating blades with fixed contact jaws arcing horns applying petrolium jelly to moving mechanism cleaning and lubricating to isolator gear box assembly tightening all nuts bolts and clamps of jumpers etc repairing to isolator gear box assembly and making in proper serviceable condition for smooth functioning testing and commissioning on load complete all as specified and directed, supplying and fixing in repairs malemoving contact rotating blade of hde copper silver plated of air brake off load isolator switch rotating type 33 kv 1250800 amps capacity with all fixing nuts bolts etc complete all as specified and directed, supplying and fixing in repairs fixed contacts made of hde copper silver plated of air brake off load isolator switch rotating type 33 kv 1250800 amps capacity with all fixing nuts bolts etc complete all as specified and directed, supplying and fixing of terminal pad for air brake off load isolator switch rotating type 33 kv 1250800 amps capacity complete all as specified and directed, supply and install ht 33 kv drop out fuse with double stack channel type insulator including fixing arrangements all as specified and directed, supply and install ht 33 kv jaw clamp including fixing arrangements all as specified and directed, ml for lightining arrester expulsion type set of three as per existing makemodelcapacity to be fixed on existing structure complete with all fitting transmission class discharge capacity 65 kilo amps suitable for 33000 volts incl taking down old one etc complete as specified and directed, sf in replacement pg parallel groove clamps as per is- 5561 2018 for 33 kv11 kv acsr conductors complete all as specified and directed by eic, supply installation testing and commissioning in replacement of air- break off load line isolator switch rotating type manually gear drive mechanism operated highest system voltage 36 kv rated current 1250 amps triple pole with earthing device each pole consist of insulating pedestals 03 nos on galvanized steel base as per bss is incuding rotating blade of hde copper and fixed contacts of same material spring loaded arcing horns of adequate section to brake magnetizing current of transformer as directed with adequate 50mm dia gi operating pipe for operation from ground level and operating handle complete with both off and on positions complete all as specified and directed, disconnecting all the electric connections from ht and lt side incl earthing terminals from the transformers and taking down transformer from plinth by using cranehydra and opening of top cover for visual inpection for the tap changer and winding condition or as required at site and reinstall at existing location including testing of 3311 kv capacity 315 mva all as specified and directed by engineer-in-charge note- replacement of unsv spare parts required to make transformer functional shall be measured and paid seperate as sf under respective item of work, supply fixing of hv bushing with terminal rod complete all as specified and directed, supply fixing of lv bushing with terminal rod complete all as specified and directed, labour for repairs to the leaks of transformer from tap switch fins any pats of body by replacing gasket seal or repairs to the leaks of transformer body fins by welding brazing etc complete all as specified and directed, ml in repair replacement of prv pressure relief valve of outdoor transformer capacity 3150 kva 33kv11 kv as existing size model complete with its connected wiring and control all as specified directed by engr-in-charge, ml for servicing of buchholz relay of outdoor transformer capacity 3150 kva 33kv11 kv as existing size model complete by connected wiring oil levels lekage arresting and checking of oil level complete all as specified directed by engr-in-charge, sf of breather assembly transparent type filled with silica gel of fresh blue colour suitable for transformer of capacity up to 3150 kva complete all as specified and directed, supply fixing of circular oil level gauge indicating meter with complete float valve assembly for fixing on conservator tank of 3150 kva 33kv11 kvtransformer complete all as specified and as directed, dehydrationfiltration of transformer oil of transformer and oltc by centrifuging machine without disturbing electric supply by heatingfiltration of oil to achieve dielectric strength not less than 60 kv when measured at 25 mm gap for one minute and topping up to oil level mark at the conservator complete all as specified and directed by engineer-in-charge note- i the contractor shall make his own arrangement for centrifuging machine motorised break down kit and all tp and manpower required at site centrifuging and topping up etc and unit rate quoted shall be deemed to include for the same ii new transformer oil as required shall be measured and paid separatly under respective item as supply only iii the rate quoted by contractor shall deem to be included for three phase generator supply for dehydaration if required iv record of new insulating oil used for replacement and topping up oil in transformer shall be maintained duly signed by rep of contractor and age em, supply only new transformer oil as per is for topup with dielectric strength not less than 60 kv complete all as specified and directed by engineer - in - charge make- savitapower oilhp, ml for hiring of cable fault detector to detect exact position of fault for xlpe pvc ht cable 11000 33000 volts grade heavy duty aluminium conductor of any size complete all as specified and directed by engr-in-charge, ml for fixing in repair end joint kit for 11 kv earthed grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminium conductor cable of size 120 sqmm to 185 sqmm complete all as specified and testing after jointing complete note- item rate quoted including required tprefixing reconnection of cable in the panelpole cable joints complete all as specified and directed, supply jointing and testing in replacement of indoor type cable end termination joint heat shrinkable suitable for aluminium conductor cable of size 240 sqmm x 3 core to 300 sqmmx 3core 11000 volts grade complete all as specified and directed note- item rate quoted including required tprefixing reconnection of cable in the panelpole cable joints complete all as specified and directed make- densonraychem3mcabseal, sf in repairs cable jointing kit for 33 kv earthed grade cable for outdoor termination heat shrink type end joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminium conductor cable of size 300 sqmm complete all as specified and directed note- item rate quoted including required tprefixing reconnection of cable in the panelpole cable joints complete all as specified and directed make-densonraychem3mcabseal, ml in repairreplacement for earthing complete with using copper earth plate electrode 600 mmx 600 mmx315 mm thick buried directly in ground earth pit not less than 225 mtr deep below ground level with top edge of the earth plate not less than 150 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate using 20x3mm copper earth strip as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switchcontrol board at another end gi earth lead incased in and including 50 mm dia gi light grade pipe from upper end of earth plate upto equipment with including 20 mm dia bore gi pipe light grade as water pipe from earth chamber to upper edge of the earth plate gi funnel with wire mesh fixed on water pipe and provision of pcc 124 type b1using 20 mm graded stone agg as in pits chamber and rcc pit cover 50 mm thick of precast rcc 124 type b-1 using 20 mm graded stone agg including necessary excavation and earth work in softloose soil all as shown in electric plate no 3 of ssr part-i and testing on completion complete all as specified and directed by engr-in-charge, ml in repairreplacement for earthing complete with using galvanized steel earth plate electrode 600 mmx 600 mmx 60 mm thick buried directly in ground earth pit not less than 225 mtr deep below ground level with top edge of the earth plate not less than 150 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate using 32x6 mm gi earth strip as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switchcontrol board at another end gi earth lead incased in and including 50 mm dia gi light grade pipe from upper end of earth plate upto equipment with including 20 mm dia bore gi pipe light grade as water pipe from earth chamber to upper edge of the earth plate gi funnel with wire mesh fixed on water pipe and provision of pcc 124 type b1using 20 mm graded stone agg as in pits chamber and rcc pit cover 50 mm thick of precast rcc 124 type b-1 using 20 mm graded stone agg including necessary excavation and earth work in softloose soil all as shown in electric plate no 3 of ssr part-i and testing on completion complete all as specified and directed by engr-in-charge, sf in repairreplacement of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduitpipe or fixed to poles or any other indicated situation for loop earthing etc as required by copper strip 20x3 mm all as specified and as directed, sf in repairreplacement of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduitpipe or fixed to poles or any other indicated situation for loop earthing etc as required by galvanized iron strip 32x6mm complete all as specified and directed, labour for cutting trimming of tree branches up to 80 mm wide all around from the outer face of alignment of 33 kv ht over head electric line which are going touching or falling or acsr conductor poles or near by sub stns etc at any height from gl and making clearance 15m form conductor and removing to a distance up to 100 mtr where directed by engineer-in-charge note- i trimming of the branches on one sides of the conductor ii actual length of cutting will be measured iii the distance as motioned above will be maintained during contract current period same location subject to at least 6 months period between two trimminglopping iv measurement will be taken including all conductor as one only, mlfor preparatiom of old treated steel surface of any description of 33 kv yard and applying one coat of synthetic enamel paint complete all as specified, mlfor preparatiom of old treated pcc plastered surface of wall foundation of 33 kv yard and applying one coat of white wash complete all as specified, clearing away all grass vegetation saplings shrubs brush wood undergrowth roots and trees not exceeding 30 cm girth measured one metre above ground level and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance softloose soil and getting out including sprinkling anti vegitation chemical for complete area with spray machine complete all as specified directed, a line isolator 33 kv horizontal type - servicing of line isolator horizontal break outdoor type including cleaning of contact by ctc liquid proper oiling greasing on contacts moving rod handle for proper function of moveable rod for smooth on off position and checking the incoming and outgoing connection including replacement of terminal lugspg clamps with nut bolts etc and testing with following i meggar testing between phase to phase phase to earth shall be carried out, b ht potential transformer or 33 kv 110 volt outdoor type - cleaning of bushing and terminal of ht potential transformer 33 kv 110 volts outdoor type by ctc liquid and checking of oil level and oil dielectric strength bd test and proper connection checkingtightining of control wiring and testing with following - i meggar testing between phase to phase phase to earth, c ht 33 kv or 11 kv outdoorindoor type current transformer ct cleaning of bushing and terminal by ctc solution of ct 33 kv or 11 kv of any ratio and any type and checking of oil level and oil dielectric strength bdv test and for 11 kv checking of wiring circuits and decarbonising of cablebusbar jointsand proper connection checkingtightining of control wiring and testing with following i testing between phase to phase phase to earth to be carried out by external current injection kit, d 3311 kv vcbbreaker control relay panel 02 nos 33 kv panel - cleaning of control relay panel inside outside and checkingtightningrewiring if required cost of new wire is included in quoted rate all the control cable connection of ct pt vcb meters trivector meter transformer complete and testing with the following - i over current earth fault relay tripping by external current injecting kit on primarysecondary side ii buccholz relay alarm tripping testing iii oil temperature alarm tripping testing iv winding temperature alarm tripping testing v all selector switchesindication lamps such as localremoteonoff accept reset push button indication lamp checkedreplaced if required complete the cost of switchindication lamps will deemed to be included in quoted rate, etransformer 33 11 kv up to 315 mva - cleaning of power transformer 33 11 kv outdoor type externally including all accessories such as conservator tank marshaling box bushings bucholz relay radiator bushings oil level indicator complete and checking the incoming and outgoing terminal connection complete with the following testing - i transformer oil dielectric strength bd voltage test ii buccholz relay alarm trip testing iii oil temprature alarm trip testing iv winding temprature alarm trip testing v meggar testing between hv to earth vi meggar testing between lv to earth vii meggar testing between hv to lv viii earth resistance test for body earthing ix replacement all packing and viewing glass in marshilling box if required, f do fuse 33 kv cleaning of 33kv ht insulators checking the incoming outgoing joint connection replacing with new do fuse of approved rating including replacement of conductor clapms by replacing rusted nut bolts etc and testing with the following - i meggar testing between phase to phase phase to earth, ml for cement concrete for filling in foundations or making good of road pcc floor supports etc type b1 124 using 20 mm graded crushed stone aggregate including necessary form work and fair finishing of exposed surface of concrete facia finish with cement mortar complete all as directed, supply of fuse wire made up of tinned copper of rating 20 amp to 60 amp complete all as specified and directed note- fuse wire shall be taken on charge and record of consumption of same shall be maintained by ageje em, supply of ht insulation tapes roll isi marked for terminating high voltage 3311 kv cables for insulation sealing of connection of wire and cable for bus bar insulation transformer terminal insulation etc complete all as specified and directed, supply and fixing in replacement of danger notice plate 33000 volt and 11000 volt of 16mm thick ms sheet vitreous enamelled white with letters figuers and conventional skull and bones in signal red colour and fixed with ms clamps made out of flat iron 25x3 mm nuts-bolts of approved size for ht 25 x 20 cm and complete all as specified and directed, ml for hardcore of broken stone or boulders gauge of 40mm to 63 mm deposited spread and levelled in layers n exc 15cm thick around ht four poletwo pole structure and transformer area complete all as specified, repair to earth pit earth pit cover of 3311 kv switchyard by using pcc 124 and plastering in cm 13 complete including excavation returning filling and removal etc complete all as specified and directed, supply and laying in replacement of ht high voltage insulation mat size 2mx1m made of elastomeric polymers material having a high insulation registance thus imparting total saety to human being from any leakage current having high insulation registance of class a of size 30 mm thick and 1 m width suitale for 33 kv confirming to is-15652 2006 including pasting of mat with sr-998 by adding thinner as per requirement complete all as specified and directed

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

Prev 3 4 5 Next