FILTERS
supply of manufacture and supply of ncr grsp 6.0mm for 1:8.5 mg t/o, rdso drawing no. t-6327 wit h alt-1 or latest alteration and conforming to irs specification no. irs-t-55-2025 (revision-1) or latest up t o tender opening date shall be applicable. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
View Insights
supply of cms crossing for mg. 52 kg (uic) on psc sleepers 1 in 12 to rdso drg. no. t-6452, complet e with all fittings as listed in the drawing excluding grooved rubber sole plates, check rails, insulating lin ers, elastic rail clips and conforming to irs specification no. irs:t-29 revised 2024 for cast manganese st eel crossings (the alteration in drawing and specification issued by rdso up to tender closing date shall b e applicable to this tender). [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of manufacture and supply of heat treated welded crossing for section of wing rail and point ra il mg(1000 mm) for 52 kg on psc sleepers 1 in 8.5 to rdso drg. no. t-6329, complete with all fittings as li sted in the drawing excluding grooved rubber sole plates, check rails, insulating liners, elastic rail clips and conforming to irs specification no. irs:t-10-2025. [ warranty period: 30 months after the date of de livery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of 1 in 8.5 tws turnout for 22.9t axle load for 6400 mm curved switch with 60e1a 1 thick web tongue rails for 1 in 8.5 turnout b.g. (1673 mm) for 60e1 rail with r260 grade o n psc sleepers (drawings and item details as mentioned in set document are applicable) dr g: (rdso) rdso/t-9775 alt.3 spec: (rdso) irs/t-10-2025 set doc: set_rt_9775_ alt_3 [ warranty pe riod: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] se/track.depot/gd, ner
supply of fishplates (joggled) for use on defective welded joint for b.g. 60 kg (drawing and item details as mentioned in set documents are applicable) drg: (rdso) rt-5849 spec: (r dso) irs: t-1-2021 set doc: set documents for rt-5849 [ warranty period: 30 months after the date o f delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] se/track.depot/gd, ner
supply of glued insulated rail joints for bg uic 60/60e1 g3(l) drg: (rdso) rdso-t-2572 alt-5 spec: (rdso) manual for girj-2024 [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] se/track.depot/gd, ner
supply of 1 in 12 over riding (o.r.) turnout : 1 in 12 cast manganese steel crossing b.g. (1 673 mm) for 60e1 rail on psc sleepers excluding erc, liner, ncrgrsp, fish plates, check rail and check rail fittings. (drawing and item details as mentioned in set documents are applic able) drg: (rdso) rdso/t-4220 alt.09 spec: (rdso) irs/t-10-2025, (rdso) irs:t-29 (revised -2024) se t doc: set documents for rt-4220 [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] se/track.depot/gd, ner
manufacture and supply of prestressed mono-block concrete sleeper sets for 1:12 turnouts (p re tensioned type) for meter gauge 1000 mm as per rdso drg. no. t-6450 with latest alteration upto date, (for general layout) and part drawing there of to suit 52 kg. uic rail (both fan shaped) and as per irs speci fication t-45-2021 (fourth revision march 2021) with corrigendum no. 2 or latest amendments. [ warranty period: 60 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] anywhere in lucknow division of
supply of 1 in 8.5 tws turnout for 22.9t axle load : 1 in 8.5 weldable cast manganese stee l crossing b.g. (1673 mm) for 60e1 rail with r260 grade on psc sleepers excluding erc, liner, ncrgrsp, check rail & check rail fittings. (drawing and item details as mentioned in s et documents are applicable) drg: (rdso) rdso/t-9776, alt.03 spec: (rdso) irs/t-10-2025, (rdso ) irs:t-29 (revised -2024) set doc: set documents for rt-9776 [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] se/track.depot/gd, ner
supply of fishplates for combination of 60e1/uic 60 & 52 kg (1m long) (drawing and item d etails as mentioned in set documents are applicable) drg: (rdso) rdso/t-8533 to rdso/t-8536 alt.-1 spec: (rdso) irs: t-1-2021 set doc: set documents for rt-8533-8536 [ warranty period: 30 mo nths after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] se/track.depot/gd, ner
supply of dust guard for wap1/wap4 locos clw drg no. 03/04/31/50 alt-2 [ warranty pe riod: 30 months after the date of delivery ] ]
supply of set of covers for tm hs -15250a comprising of 03 items = 08 nos.. (1) inspection cover ios- 813-666 rev. a item no. 1 to 4 qty. 01 no. (2) inspection cover (modified) trade drg. no. skel-4 737 (rev.u) qty. 06 nos. (3) terminal box cover ios- 813-539 rev. a item no. 1 to 2 qty. 01 no. [ wa rranty period: 30 months after the date of delivery ] ]
supply of manual uncoupling device without mounting brackets to ftrtipl pt. no. 727109000 for high tensile tight lock cbc confirming to rdso spec. no.-rdso/2011/cg-03(rev-1). [ warranty period: 30 months after the date of delivery ] ] general stores depot
manufacture & supply of 1 in 12 turn out (prestressed tension type) sleeper in running metr e for bg (1673 mm) as per rdso design to layout drg. no. t-4218 for general layout to suit 60/52 kg and part drawings thereof with specification irs-t-45-2021 with latest corrigendum and amendment upto date of closing of tender (details of item list as per annexure -x). [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply and fittment for material stacking rack industrial use, each section of bearing capacity 1.5 ton, size- 6.5 feet(l) x 4 feet (w) x 2 feet (d). note- material ms and one c oat red oxide primer & double coat super enamel paint. (sketch attached) firm's offermake/bra nd:-"self". [ warranty period: 30 months after the date of delivery ] ]
corrigendum : supply of slack adjuster assembly [top] for wap7/wag9hc electric locomotive brake rigging equi pment as per rdso drg.no.skvl-585, sheet no.3 [ref no.42] equivalent to clw drg. no.1209.01.116. 059 or latest up to the tender opening date. [ warranty period: 30 months after the date of delivery ] ] electric/diesel loco shed/izn,
supply of set of member for lhb coaches as per rcf"s drg. no. le 11316 (lh) alt.-a and le 1131 5 (rh) alt.-a. (one set consisting of lh= 1 no. & rh= 1 no.) item to be supplied with red oxide zinc c hromate primer coating. [ warranty period: 30 months after the date of delivery ] ] general stores depot
supply of inductive shunt assembly ( sj) type nr 59 a1 to clw drg. no. 2twd.133.021 alt-3 and cl w spec. no. 4tes.133.001 alt-7 [ warranty period: 30 months after the date of delivery ] ]
supply of end top copping for boxnhl wagon to rdso drawing no. wd-08030-s-01 alt.-2, item no.4. material as drawing and conforming to rdso specification no. wd-01-crf-12 rev.1 of jan'2016. [ warranty period: 30 months after the date of delivery ] ] general stores depot izzatnaga,
supply of control rod of slack adjuster type irsa-750 for boxnhl wagon to rdso drawing no. w d-93061-s-02 alt.-1, item no.4. material as per drawing and conforming to rdso specification no. wd -19-abr-07 amendment no. 3 of sept 2016. [ warranty period: 36 months after the date of delivery ] ] general stores depot izzatnaga,
supply of must change kit for fiba valves, make- jwl dako as per attached annexure kit consisting lis t of 5 main items for poh of lhb coaches [ warranty period: 30 months after the date of delivery ] ] - must change kit for fiba valves
supply of set of spring kit for sa9 and c2w relay valve consisting of 10 items/10 nos. per set. the details of description./ sab wabco pt.no.ftil pt.no./sil pt.no. are given as be low. (1)spring inlet valve for sa9.566696/502805000/30071900 (2) spring exhaust valve fo r sa9/561135/502806000/30072701 (3)spring regulator valve for sa9/521141/503802000/302 79301 (4) spring for sa9/538119/503803000/30279401 (5)handle latch spring yoke for sa9/5 64381/502828000/30073800 (6)supply valve spring for c2w relay valve/562292/505804000/30 383101 (7) ring retaining for c2w relay valve/850021/505803000/30383221 [ warranty perio d: 30 months after the date of delivery ] ] page 1 of 7 run date/time: 11/09/2026 16:08:42 stores/north eastern rly tender document tender no: 24262007 closing date/time: 25/09/2026 11:30 electric/diesel loco shed/izn, - set of spring kit for sa9 and c2w relay valve consisting of 10 items/ 10 nos per set . the details of description. sab wabco pt no, ftil pt no, sil pt.no are given as below. (1) spring inlet valve for sa9 / 566696/502805000 / 30071900 (2) spring exhaust valve for sa9 / 561135 / 502806000 / 30072701 (3) spring regulator valve for sa9 / 521141 / 503802000 / 30279301 (4) spring for sa9 / 538119 / 503803000 / 30279401 (5) handle latch spring yoke for sa9 / 564381 / 502828000 / 30073800 (6) supply valve spring for c2w relay valve / 562292 / 505804000 /30383101 (7) ring retaining for c2w relay valve / 850021 / 505803000 / 30383221 (8) ring retaining for c2w relay valve / 540570 / 915009100 / 82040526 (9) spring for c2w realay valve / 562295 / 506806000 / 30383800 (10) stem spring for c2w relay valve / 562294 / 505807000 / 30383400 - each 1 no/ set.
supply of enhanced capacity side buffer plunger (casting) with face plate, flat csk head rivet, b uffer spindle, bulb cotter & hex. nut m-39 x 3 in assembled condition to rdso drg, no. sk- 98145, alt. 12, item no. 3, 5, 6, 7, 8, & 17. matl. & spec. as per drg. [ warranty period: 30 months after the dat e of delivery ] ] general stores depot - enhanced capacity side buffer plunger (casting) with face plate etc.
supply of air flow meter with duct holder, incl. attachment clip and batteries. measurin g range 0-10m/s and -20 to + 50 degree c. [ warranty period: 30 months after the date of delivery ] ] - air flow meter (c&w item)
supply of overhauling kit for escorts ep unit consisting of 41 items as per attached kit list. [ warr anty period: 30 months after the date of delivery ] ] general stores depot - overhauling kit for escorts ep unit consisting of 41 items.
supply of grounding flap as per item no 5 of drg no icf/sk3-7-1-054 [ warranty period: 30 months after the date of delivery ] ] - grounding flap as per item no 5 of drg no icf/sk3-7-1-054
supply of supply of handle of vb train set economic seat of m/s.pinnacle industries limited to part number -r001150700011/ r001150700021, conforming to spec: icf/md/spec-367 [ warranty period: 30 months after the date of delivery ] ] senior section engineer/fur- - 1.supply of handle of vb train set economic seat of m/s.pinnacle industries limited to part number -r001150700011/ r001150700021, conforming to spec: icf/md/spec-367. 2.supply of arm rest of vb train set executive seat of m/s.pinnacle industries limited to part number - r001150030052/ r001150030062, conforming to spec:icf/ md/spec-366, rev-3
supply of ioh kit for spm v2 medha make annexure attached. [ warranty period: 30 months after the date of delivery ] ] - ioh kit for spm v2 medha .
supply of snap lock non lockable with finger pull as per rdso letter no el/7.1.108/mssbc dated 17.09. 2021 suitable for installation in switch board cabinet of lhb eog ac coaches. material is to be supplied afte r sample approval from - snap lock non lockable with finger pull as per rdso letter no el/7.1.108/mssbc dated 17.09.2021 suitable for installation in switch board cabinet of lhb eog ac coaches. material is to be supplied after sample approval from consignee, for actual size and fitment. make :- dirak, southco, arihant, darshna.
supply of pvc hand rail cover for upper berth strip (black colour) 40 mm conforming to is: 12867-19 89 (reaffirmed-2020) with amendment no.1 of january 2008, fire retardant. [ warranty period: 30 mont hs after the date of delivery ] ] - pvc hand rail cover for upper berth strip (black colour) 40 mm conforming to is: 12867-1989 (reaffirmed-2020) with amendment no.1 of january 2008, fire retardant.
supply of primary spring inner for middle axle as per clw specification no . clw/ms/3/spec/eldo -bogie/004 . alt-2 or latest and confirming to clw drawing no.1209.01.115.009 alt-2 or latest [ warra nty period: 30 months after the date of delivery ] ] amm/electric loco shed gkp, - primary spring inner for middle axle as per clw specification no . clw/ms/3/spec/eldo -bogie/004 . alt-2 or latest and confirming to clw drawing no.1209.01.115.009 alt-2 or latest
supply of supply of assembly of decoupling rubber to spec. mdts-30, length- 746mmwith m s metal strip size:5x60x746mm to drg. no. lwscwac/eog-4-1-004, alt-a, item 3 and 6. [ warranty period: 30 months after the date of delivery ] ] senior section engineer/fur- - supply of assembly of decoupling rubber
supply of spheri block for axle guide link/tm torque arm for wag9 locos to specn no rd so/2007/el/spec/0051 rev-02 or latest & abb drg no 1a01600005 rev-3. [ warranty period: 30 mo nths after the date of delivery ] ] - spheri block for axle guide link/tm torque arm for wag9 locos to specn no rdso/2007/el/spec/0051 rev-02 or latest & abb drg no 1a01600005 rev-3.
supply of long life loco side buffer assly. capacity 30 kj as per rdso drg. no. skdl-47 48 alt -2 & rdso specification no.mp.041.00.03 rev-03 aug-2024. [ warranty period: 30 months after the date of delivery ] ] - long life loco side buffer assly. capacity 30 kj as per rdso drg. no. skdl-4748 alt -2 & rdso specification no.mp.041.00.03 rev-03 aug-2024.
supply of aoh kit for spm v4 of medha make as per annexure attached. [ warranty period: 30 month s after the date of delivery ] ] - aoh kit for spm v4 of medha make as per annexure attached.
supply of set of spares part of ercu for vande bharat, make-schunk, one set consist of (1) brush hold er machining (earthing device, schunk part no. 909010056200), qty-02 nos. (2) carbon brush assembly (e arthing device, schunk part no. - 909030049300), qty-10 nos. (3) top cover-machined, qty-05 nos. (4) pre ssure finger assembly earthing device, schunk part no.- 909010053700)-qty-10 nos. [ warranty period: 30 months after the date of delivery ] ] - set of spares part of ercu
supply of memu item:- set of spares for elgi comp. rr15070 (i) fan assy compr as per elgi part no.- a070550 qty = 01 no. (ii) fan shaft comp side as per elgi part no.- 070405770 qty = 01 no. (iii) key wo od ruff as per elgi part no.- 070405650 qty = 01 no. (iv) guard fan as per elgi part no.- 070307100 qty .- 01 no. [ warranty period: 30 months after the date of delivery ] ] - memu item:- set of spares for elgi comp. rr15070
supply of hp piston assly kit consisting of 4 items 1) hp piston, to gd pt.no. 300wln015/emd pt no. 40017903/40181295, qty = 01 no./kit 2) hp piston roller bearing to gd pt no 12gd19/emd pt no. 8422002 qty = 02 nos./kit 3) piston pin retaining ring to gd pt. no 65w33/emd pt no 8421999/2746 21, qty 04 nos/kit 4)hp piston pin to gd pt.no 300wbo505/emd pt no. 40181296, qty = 1 no/ kit [ w arranty period: 30 months after the date of delivery ] ] electric/diesel loco shed/izn, - hp piston assly kit consisting of 4 items 1) hp piston, to gd pt.no. 300wln015/emd pt no. 40017903/40181295, qty = 01 no./kit 2) hp piston roller bearing to gd pt no 12gd19/emd pt no. 8422002 qty = 02 nos./kit 3) piston pin retaining ring to gd pt. no 65w33/emd pt no 8421999/274621, qty 04 nos/kit 4)hp piston pin to gd pt.no 300wbo505/emd pt no. 40181296, qty = 1 no/ kit
supply of trestle as per southern railway electric loco shed, royapuram drg. no. m/els/rpm/sk238 fo r loco body for wag9-hc locomotives. [ warranty period: 30 months after the date of delivery ] ] - trestle
supply of trestle as per southern railway electric loco shed, royapuram drg. no. m/els/rpm/sk238 fo r loco body for wag9-hc locomotives. [ warranty period: 30 months after the date of delivery ] ] - trestle as per southern railway
supply of supporting device to ftrtipl part no.727102000 for fitment on ftrtipl make cbc tigh t lock coupler of b.g. coaching stock confirming to rdso spec. no. rdso/2011/cg-03 ( rev. 1 ). [ wa rranty period: 48 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] general stores depot - supporting device to ftrtipl part no.727102000 etc.
supply of one set of double ferrule fittings required for lhb coaches consisting of following: (1) m ale elbow connector (conical seating) 3/4 inch od x m26 x 1.5(m) to drg. no. icf/std-3-5-137 item-(1 )- qty.- 4 nos. per set (2) bulk head male connector (with conical seating) 3/4 inch od x m26 x 1.5(m) to drg. no. lwscwac-3-2-005 item-1-qty- 4 nos. per set. [ warranty period: 30 months after the d ate of delivery ] ] - 1. union elbow 1/2" od. icf drg no. icf/std 3-5-017 alt-a item-1 2. one set of double ferrule fittings required for lhb coaches consisting of following: (1) male elbow connector (conical seating) 3/4 inch od x m26 x 1.5(m) to drg. no. icf/std-3-5-137 item-(1)- qty.- 4 nos. per set (2) bulk head male connector (with conical seating) 3/4 inch od x m26 x 1.5(m) to drg. no. lwscwac-3-2- 005 item-1-qty- 4 nos. per set.
supply of set of items for lhb(fiat bogies) consisting of two itmes (1) chisel/spoon type lever for release air spring and bolster, made-wood/nylon. [ warranty period: 30 months after the date of delivery ] ] - 1.set of items for lhb(fiat bogies) consisting of two itmes (1) chisel/spoon type lever for release air spring and bolster, made-wood/nylon. 2.item-2- damper handling and fitment/ removal tools.
supply of set of items of make jk exim or similar for fdss; one set consists of 7 items: - (i) white end box, jk exim part no. jk-fdss-1237 or similar. qty-70 nos. (ii) end wago connector, jk exim part no. jk-fds s-1238 or similar. qty-100 nos. (iii) pressure gauge bush, jk exim part no. jk-fdss-1241 or similar. qty-0 5 nos. (iv) protection card, jk exim part no. jk-fdss-1270 or similar. qty-03 nos. (v) connector valve with adaptor, jk exim part no. jk-fdss-1271 or similar. qty-03 nos. (vi) reset button, jk exim part no. jk-fdss- 1273 or similar. qty-03 nos. (vii) manual suppression button, jk exim part no. jk-fdss-1274 or similar. qt y-03 nos. [ warranty period: 30 months after the date of delivery ] ] senior section engineer/fur- - set of items of make jk exim or similar for fdss; one set consists of 7 items: - (i) white end box, jk exim part no. jk-fdss-1237 or similar. qty-70 nos. (ii) end wago connector, jk exim part no. jk-fdss-1238 or similar. qty-100 nos. (iii) pressure gauge bush, jk exim part no. jk-fdss-1241 or similar. qty-05 nos. (iv) protection card, jk exim part no. jk-fdss-1270 or similar. qty-03 nos. (v) connector valve with adaptor, jk exim part no. jk-fdss-1271 or similar. qty-03 nos. (vi) reset button, jk exim part no. jk-fdss-1273 or similar. qty-03 nos. (vii) manual suppression button, jk exim part no. jk-fdss-1274 or similar. qty-03 nos.
supply of side wall sheet part with elongated holes to rdso drg. no- cg-10099 of size- 2388 x 21 6.5 x 5 mm. material & specn. as per drg. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] general stores depot - side wall sheet part etc.
supply of arrangement of foot step as per rdso drg. no. wd-15009-s-10, alt. 2 or latest. 01 set arrangement of foot step consists of following items. (1) foot step bracket angle, qty.02 nos. as per d rg.no.wd-15009-s-10 alt.2 (2) foot step support angle, qty.03 nos. as per drg.no.wd-15009-s-10 alt. 2 (3) foot step plate, qty.03 nos. as per drg.no.wd-15009-s-10 alt.2 (4) cleat- qty.01 nos. as per drg .no.wd-15009-s-10 alt.2 (5) packing plate-qty.02 nos. note:-item 1,2 & 3 should be supplied inassem bled condition as per shown in the drawing and item 4 & 5 should be supplied as loose components. [ warranty period: 30 months after the date of delivery ] ] - arrangement of foot step (c&w item)
supply of toh kit for high reach pantograph type lx3600. as per annexure attached. [ warranty per iod: 30 months after the date of delivery ] ] - toh kit for high reach pantograph type lx3600. as per annexure attached.
supply of buffer spindle (b.g.) to irs drg no.w/ bd- 353 alt- 8 material and specn. as per drg. [ warranty period: 30 months after the date of delivery ] ] general stores depot izzatnaga, - buffer spindle (b.g.) etc.
supply of 37 mm thick packing for height adjustment of casnub bogie to rdso drawing no. wd-9 1074-s-1 alt-4, item-2. material & specification as per drawing. [ warranty period: 30 months after t he date of delivery ] ] general stores depot izzatnaga, - 37 mm thick packing for height adjustment of casnub bogie etc.
supply of stringer (inner) for boxnhl wagon to rdso drawing no. wd-09034-s-22 alt.-10, item no.7(g). material as per drawing and conforming to rdso spec wd-01-crf-12 revision 1. [ warranty period: 30 months after the date of delivery ] ] general stores depot izzatnaga, - stringer (inner) for boxnhl wagon etc.
LOADING...