Latest Thermometer Tenders In Rural Works Department 2026

T247 ID-104280980 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |25-09-2026 Ending Today

for supply, installation, demonstration and training of laboratory equipment of testing and quality control, laboratory, jehanabad, rural works department, govt. of bihar.,equipment for sampling-digging tools pick axes, shovels, hammers, chisels etc. sieves-gi/brass frame dia 200 mm as per 18 460(part 1)-,fine aggregates and soils-10 mm, 9.5mm, 6.3mm, 5.6 mm, 4.75 mm, 3.35mm, 2.80 mm, 2.5mm, 2.36 mm, 2.00 mm, 1.70 mm, 1.18 mm, 1 mm, 850 micron, 710, 600, 500, 425, 355, 300, 250. 212, 180, 150, 90 and 75 micron with pan and cover, equipment for testing of course aggregates-llength & thickness gauges (flakiness & elongation index apparatus),ref. standards: 15:2720 (part 5), 18:9259, 88 1377,liquid limit and plastic limit testing apparatus,standard proctor density test apparatus with rammer (light compaction),sand pouring cylinder with tray complete for belt density test.,sampling tins with lids 100 mm dia, 50 mm height,stop watch-0.5 sec sensitivity,sub-base (granular sub base),sieves-brass frame dia 200 mm as per 15 460(part 1)-,coarse aggregates-125 , 106 , 100, 90 mm, 80 mm, 75 , 63 mm, 53 mm, 50 mm 45 mm, 40 mm, 37.5 mm, 31.5 mm, 26.5 , 25 , 22.4 , 20 mm, 19 mun, 16 mm, 13.2 mm, 12.5 mm, 11.2 mm, 10 m, 9.5 li, 6.3 , 5.6 , 4.75 335mm, 2.80 mm, 2.5mm, 2.36mm size with lid and cover, length & thickness gauges (flakiness & elongation index apparatus),aggregate soundness test apparatus,as per is code 2386 (part 4), is 9377 aggregate impact value test apparatus,cellaneous,as per is code 2720 (part 29) steel core cutter with dolly and hammer,water tank for soaking cbr molds (4 ft x 3ft x 1.5 ft),camber board,riffle box for 40mm/20mm,base(wbm/wmm),trays for measurement of tack quantity,,digital thermometers,mipment for testing of concrete-,slump cone,cube molds (150 mm x 150 mm x 150 mm),mortar cube molds (70.6 mm x 70.6 mm x 70.6 mm),thickness gauge,glassware & other accessories- spatulas, scoops, steel scales, measuring tape,casseroles, assorted sizes of enameled trays, porcelain dish, filter paper, funnel, glass marking pencils, hent resistant hand gloves, spirit levels, verniercalipers, mortar with rubber covered pestle,reagents: hydrochloric acid, sodium hexametaphosphate, hydrogen peroxide, calcium carbide one set, trichloroethylene, benzene (500ml),equipment for testing of soils-as per is code 2720 (part 2), is 12175-1987 rapid moisture meter complete with chemicals,as per is code 2720(part 16), astm d 1883, bs 1377lab cbr equipment (complete set) with 12 molds,gas burner, sand bath,balances-,a) electronic/digital balance (1-2 kg) with the least count of 0.01 g.,b) electronic/digital balance (50-60 kg),oven (200) thermostatically/digitally controlled,base(wbm/wmm),sipment for testing of bitumen and emulsion-,as per 15 code 1203astm d5,penetration test apparatus with standard needles (digital),water bath (ambient to 100c) digital controlled (501, capacity),tar viscometer,as per 15 code 13826 (part 1), astm d 2172, aashto t164 equipment for testing bituminous mixes-electrically operated centrifuge type bitumen extractor 1.51. capacity with 11. benzene,core cutting machine with bit & barrel of size 100mm with 5hp generator,as per 15 code 2720 (part 7 and 8), 15 9198, 15 10074, bs:1377 astm d 698, d 1557 compression testing machine (200 tonnes capacity) with 0.1kn least count (digital),temperature controlled water tank for curing-48"x24"x20",as per 15 code 1205 and astm d 36 softening point apparatus/ ring & ball apparatus,amc charges for 04 years after 01 year of compulsory warranty period.,send feedback.

Jehanabad, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104305489 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |28-09-2026 3 Days Left

sealed quotations are invited from reputed and eligible manufacturers / oems / authorized dealers / suppliers for supply, installation, demonstration and training of laboratory equipment equipment for sampling- digging tools pick axes, shovels, hammers, chisels etc. sieves-gi/brass frame dia 200 mm as per is 460(part 1)-fine aggregates and soils-10 mm, 9.5mm, 6.3mm, 5.6 mm, 4.75 mm, 3.35mm, 2.80 mm, 2.5mm, 2.36 mm, 2.00 mm, 1.70 mm, 1.18 mm, 1 mm, 850 micron, 710, 600, 500, 425, 355, 300, 250, 212, 180, 150, 90 and 75 micron with pan and coverl equipment for testing of coarse aggregates-l.length & thickness ganges(flakiness & elongation index apparatus)ref. standards: is:2720 (part 5), is:9259, bs 1377 liquid limit and plastic limit testing apparatusiii. standard proctor density test apparatus with rammer (light compaction) iv. sand pouring cylinder with tray complete for field density test.sampling tins with lids 100 mm dia, 50 mm heightvi.stop watch-0.5 sec sensitivitysub-base (granular sub base)sieves - brass frame dia 200 mm as per is 460(part 1)-coarse aggregates-125 mm, 106 mm, 100 mm, 90 mm, 80 aus, 75 mun, 63 mm, 53 mm, 50 mm 45 mm, 40 mm, 37.5 mm, 31.5 mm, 26.5 mm, 25 mm, 22.4 mm, 20 mm, 19 mm, 16 mm, 13.2 mm, 12.5 mm, 11.2 mm, 10 mm, 9.5 mm, 6.3 mm, 5.6 mm, 4.75 mm, 335mm, 2.80 mm, 2.5mm, 2.36mm size with lid and soverequipment for testing of coarse aggregates-llength & thickness gauges (flakiness & elongation index apparatus)iiaggregate soundness test apparatushlas per is code 2386 (part 4), 15 9377 aggregate impact value test apparatusmiscellaneousas per is code 2720 (part 29) steel core cutter with dolly and hammerwater tank for soaking chr moulds (4 x 3ft x 1.5 ft)camber boardiv.riffle box for 40mm/20mmbase (whm/avmm)ltrays for measurement of tack quantity,ii.digital thermometers.equipment for testing of concrete-lslump coneilcube moulds (150 mm x 150 mun x 150 mm)iii.mortar cube moulds (70.6 mm x 70.6 mm x 70.6 mm)iv.thickness gaugeglassware & other accessories-spatulas, scoops, steel seales, measuring tape,casseroles, assorted sizes of enameled trays, porcelain dish, filter paper, funnel, glass marking pencils, heat resistant hand gloves, spirit levels, vernier calipers, mortar with rubber covered pestlereagents: hydrochloric acid, sodium hexametaphosphate, hydrogen peroxide, calcium carbide one set, trichloroethylene, benzene (500ml)lequipment for testing of soils-as per is code 2720 (part 2), is 12175-1987 rapid moisture meter complete with chemicalsas per is code 2720(part 16), astm d 1883, bs 1377 lab cbr equipment (complete set) with 12 mouldsiii.gas burner, sand bathiv.balances-a) electronic/digital balance (1-2 kg) with the least count of 0.01 gb) electronic/digital balance (50-60 kg)oven (200) thermostatically/digital controlledbase (wbm/wmm)equipment for testing of bitumen and emulsion-las per is code 1203 astm d5 penetration test apparatus with standard needles (digital)ii.water bath (ambient to 100c) digital controlled (501. capacity)iii.tar viscometeriv.as per is code 13826 (part 1), astm d 2172, aashto t164 equipment for testing bituminous mixes- electrically operated centrifuge type hitusen extractor 1.51. capacity with il benzenevi.core cutting machine with bit & barrel of size 100mm with shp generatoras per is code 2720 (part 7 and 8), is 9198, is 10074, bs:1377 astm d 698, d 1557 compression testing machine (200 tonnes capacity) with 0.1kn least count (digital)vii.temperature controlled water tank for curing-48"x24"x20"as per is code 1205 and astm d 36 softening point apparatus/ ring & ball appartusamc charges for 04 years after 01 year of compulsory warranty period for testing & quality control laboratory

Arwal, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104362746 |Bid Value:₹ Refer Docs |EMD:₹ 50.00 K |Refer Docs

supply, installation, demonstration and training of laboratory equipment - equipment for sampling- digging tools pick axes, shovels, hammers, chisels etc. sieves-gi/brass frame dia 200 mm as per is 460(part 1) - fine aggregates and soils-10 mm, 9.5mm, 6.3mm, 5.6 mm, 4.75 mm, 3.35mm, 2.80 mm, 2.5mm, 2.36 mm, 2.03 mm, 1.70 mm, 1.18 mm, 1 mm, 850 micron, 710, 600, 500, 425, 355, 300, 250, 212, 180, 150, 90 and 75 micron with pan and cover. equipment for testing of coarse aggregates-i.length & thickness gauges (flakiness & elongation index apparatus) ii. ref. standards: is:2720 (part 5), is:9259, bs 1377 liquid limit and plastic limit testing apparatus iii. standard proctor density test apparatus with rammer (light compaction) sand pouring cylinder with tray complete for field density test. v. sampling tins with lids 100 mm dia, 50 mm height vi. stop watch-0.5 sec sensitivity sub-base (granular sub base) sieves - brass frame dia 200 mm as per is 460(part 1) - coarse aggregates-125 mm, 106 mm, 100 mm, 90 mm, 80 mm, 75 mm, 63 mm, 53 mm, 50 mm 45 mm, 40 mm, 37.5 mm, 31.5 mm, 26.5 mm, 25 mm, 22.4 mm, 20 mm, 19 mm, 16 mm, 13.2 mm, 12.5 mm, 11.2 mm, 10 mm, 9.5 mm, 6.3 mm, 5.6 mm, 4.75 mm, 335mm, 2.80 mm, 2.5mm, 2.36mm size with lid and cover equipment for testing of coarse ggregates length & thickness gauges (flakiness & elongation index apparatus) aggregate soundness test apparatus as per is code 2386 (part 4), 18 9377 aggregate impact value test apparatus miscellaneous as per is code 2720 (part 29) steel core cutter with jolly and haminer h. water tank for soaking cbr moulds (4ft * 3ft * 1.5ft) camber board iv. riffle box for 40mm/20mm base (wbm/wmm) l trays for measurement of tack qua ntity, ii. digital thermometers equipment for testing of concrete - 1. slump cone ii. cube moulds (150mm * 150mm * 150mm * 150mm) iii. mortar cube moulds (70.6mm * 70.6mm * 70.6mm) iv. thickness gauge glassware & other accessories- spatulas, scoops, steel scales, measuring tape,casseroles, assorted sizes of enameled trays, porcelain dish, filter paper, funnel, glass marking pencils, heat resistant hand gloves, spirit levels, vernier calipers, mortar with rubber covered pestle reagents: hydrochloric acid, sodium hexametaphosphate, hydrogen peroxide, calcium carbide one set, trichloroethylene, benzene (500ml) ork/subgrade equipment for testing of soils-as per is code 2720 (part 2), is 12175-1987 rapid moisture meter complete with chemicals ii. as per is code 2720(part 16), astm d 1883, bs 1377 lab cbr equipment (complete set) with 12 moulds iii. gas burner, sand bath iv. balances- a) electronic/digital balance (1-2 kg) with the least count of 0.01 g. b) electronic/digital balance (50-60 kg). v. oven (200 deg) thermostatically/digital controlled base (wbm/wmm) equipment for testing of bitumen and emulsion- as per is code 1203 astm d 5 penetration test apparatus with standard needles (digital) ii. water bath (arubient to 100 deg * c ) digits) controlled (50l capacity) iv. tar viscometer as per is code 13826 (part 1), astm d 2172, aashto t164 equipment for testing bituminous mixes- electrically operated centrifuge type bitumen extractor 1.5l capacity with 1l benzene v. core cutting machine with bit & barrel of size 100mm with 5hp generator vi. as per is code 2720 (part 7 and 8), is 9198, is 10074, bs:1377 astm d 698, d 1557 compression testing machine (200 tonnes capacity) with 0.1kn least count (digital) vii. temperature controlled water tank for curing-48"x24"x20" as per is code 1205 and astm d 36 softening point apparatus/ ring & ball appartus amc charges for 04 years after 01 year of compulsory warranty period for testing & quality control division, nalanda rural works department, government of bihar.

Nalanda, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104490602 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |Refer Docs

supply, installation, demonstration and training of laboratory equipment for testing & quality control division, motihari, rural works department - equipment for sampling- digging tools pick axes, shovels, hammers, chisels etc., sieves -gi/brass frame dia 200 mm as per is 460(part 1) -, fine aggregates and soils-10 mm, 9.5mm, 6.3mm, 5.6 mm, 4.75 mm, 3.35mm, 2.80 mm, 2.5mm, 2.36 mm, 2.00 mm, 1.70 mm, 1.18 mm, 1 mm, 850 micron, 710, 600, 500, 425, 355, 300, 250, 212, 180, 150, 90 and 75 micron with pan and cover, i. equipment for testing of coarse aggregates-i.length & thickness gauges (flakiness & elongation index apparatus), ii. ref. standards: is:2720 (part 5), is:9259, bs 1377 liquid limit and plastic limit testing apparatus, iii. standard proctor density test apparatus with rammer (light compaction), iv. sand pouring cylinder with tray complete for field density test., v. sampling tins with lids 100 mm dia, 50 mm height, vi. stop watch-0.5 sec sensitivity, sub-base (granular sub base), sieves - brass frame dia 200 mm as per is 460(part 1) -, coarse aggregates-125 mm, 106 mm, 100 mm, 90 mm, 80 mm, 75 mm, 63 mm, 53 mm, 50 mm 45 mm, 40 mm, 37.5 mm, 31.5 mm, 26.5 mm, 25 mm, 22.4 mm, 20 mm, 19 mm, 16 mm, 13.2 mm, 12.5 mm, 11.2 mm, 10 mm, 9.5 mm, 6.3 mm, 5.6 mm, 4.75 mm, 135mm 2.80 mm, 2.5mm, 2.36mm size with lid and cover, equipment for testing of coarse aggregates-, i. length & thickness gauges (flakiness & elongation index apparatus), ii. aggregate soundness test apparatus, as per is code 2386 (part 4), is 9377 aggregate impact value test apparatus, miscellaneous, i. as per is code 2720 (part 29) steel core cutter with dolly and hammer, ii. water tank for soaking cbr moulds (4ft * 3ft * 1.5ft) camber board, iv. riffle box for 40mm/20mm base (wbm/wmm), i. trays for measurement of tack quantity,, ii. digital thermometers equipment for testing of concrete -, slump cone, ii., cube moulds (150mm * 150mm * 150mm), iii., mortar cube moulds (70.6mm * 70.6mm * 70.6mm), iv., thickness gauge, glassware & other accessories-spatulas, scoops, steel scales, measuring tape,casseroles, assorted sizes of enameled trays, porcelain dish, filter paper, funnel, glass marking pencils, heat resistant hand gloves, spirit levels, vernier calipers, mortar with rubber covered pestle, reagents: hydrochloric acid, sodium hexametaphosphate, hydrogen peroxide, calcium carbide one set, trichloroethylene, benzene (500ml), l, equipment for testing of soils-as per is code 2720 (part 2), is 12175-1987 rapid moisture meter complete with chemicals, ii., as per is code 2720(part 16), astm d 1883, bs 1377 lab cbr equipment (complete set) with 12 moulds, iii., gas burner, sand bath, iv., balances-, a) electronic/digital balance (1-2 kg) with the least count of 0.01 g, b) electronic/digital balance (50-60 kg), v., oven(200) thermostatically/digital controlled, base (wbm/wmm), equipment for testing of bitumen and emulsion-, i., as per is code 1203 astm d5 penetration test apparatus with standard needles (digital), ii., water bath (ambient to 100c) digital controlled (50l capacity), iii., tar viscometer, iv., as per is code 13826 (part 1), astm d 2172, aashto t164 equipment for testing bituminous mixes- electrically operated centrifuge type bitumen extractor 1.5l capacity with il benzene, v., core cutting machine with bit & barrel of size 100mm with 5hp generator, vi., as per is code 2720 (part 7 and 8), is 9198, is 10074, bs:1377 astm d 698, d 1557 compression testing machine (200 tonnes capacity) with 0.1kn least count (digital), vii., temperature controlled water tank for curing-48"x24"x20", as per is code 1205 and astm d 36 softening point apparatus/ ring & ball appartus, amc charges for 04 years after 01 year of compulsory warranty period.

Motihari, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104490631 |Bid Value:₹ Refer Docs |EMD:₹ 50.00 K |Refer Docs

supply, installation, demonstration and training of laboratory equipment for testing & quality control laboratory hajipur (vaishali) rural works department, government of bihar - equipment for sampling- digging tools pick axes, shovels, hammers, chisels etc. sieves-gi/brass frame dia 200 mm as per is 460(part 1)- fine aggregates and soils-10 mm, 9.5mm, 6.3mm, 5.6 mm, 4.75 mm, 3.35mm, 2.80 mm, 2.5mm, 2.36 mm, 2.00 mm, 1.70 mm, 1.18 mm, 1 mm, 850 micron, 710, 600, 500, 425, 355, 300, 250, 212, 180, 150, 90 and 75 micron with pan and cover i. equipment for testing of coarse aggregates-i.length & thickness gauges (flakiness & elongation index apparatus) ii. ref. standards: is:2720 (part 5), is:9259, bs 1377 liquid limit and plastic limit testing apparatus iii. standard proctor density test apparatus with rammer (light compaction) iv. sand pouring cylinder with tray complete for field density test. v. sampling tins with lids 100 mm dia, 50 mm height vi. stop watch-0.5 sec sensitivity sub-base (granular sub base) sieves brass frame dia 200 mm as per is 460(part 1) - coarse aggregates-125 mm, 106 mm, 100 mm, 90 mm, 80 mm, 75 mm, 63 mm, 53 mm, 50 mm 45 mm, 40 mm, 37.5 mm, 31.5 mm, 26.5 mm, 25 mm, 22.4 mm, 20 mm, 19 mm, 16 mm, 13.2 mm, 12.5 mm, 11.2 mm, 10 mm, 9.5 mm, 6.3 mm, 5.6 mm, 4.75 mm, 335mm, 2.80 mm, 2.5mm, 2.36mm size with lid and cover equipment for testing of coarse aggregates- i. length & thickness gauges (flakiness & elongation index apparatus) ii. aggregate soundness test apparatus as per is code 2386 (part 4), is 9377 aggregate impact value test apparatus miscellaneous i. as per is code 2720 (part 29) steel core cutter with dolly and hammer ii. water tank for soaking cbr moulds (4ft * 3ft * 1.5ft) camber board iv. riffle box for 40mm/20mm base (wbm/wmm) i. trays for measurement of tack quantity, ii. digital thermometers equipment for testing of concrete - slump cone ii. cube moulds (150mm * 150mm * 150mm) mortar cube moulds (70.6mm * 70.6mm * 70.6mm) iv. thickness gauge glassware & other accessories- spatulas, scoops, steel scales, measuring tape,casseroles, assorted sizes of enameled trays, porcelain dish, filter paper, funnel, glass marking pencils, heat resistant hand gloves, spirit levels, vernier calipers, mortar with rubber covered pestle reagents: hydrochloric acid, sodium hexametaphosphate, hydrogen peroxide, calcium carbide one set, trichloroethylene, benzene (500ml) earthwork/subgrade i. equipment for testing of soils-as per is code 2720 (part 2), is 12175-1987 rapid moisture meter complete with chemicals ii. as per is code 2720(part 16), astm d 1883, bs 1377 lab cbr equipment (complete set) with 12 moulds gas burner, sand bath iv. balances- a) electronic/digital balance (1-2 kg) with the least count of 0.01 g b) electronic/digital balance (50-60 kg) v. oven (200 deg) thermostatically/digital controlled base (wbm/wmm) equipment for testing of bitumen and emulsion- i. as per is code 1203 astm d5 penetration test apparatus with standard needles (digital) ii. water bath (ambient to 100 deg * c ) digital controlled (501, capacity) tar viscometer iv. as per is code 13826 (part 1), astm d 2172. aashto t164 v. equipment for testing bituminous mixes- electrically operated centrifuge type bitumen extractor 1.51. capacity with 11. benzene vi. core cutting machine with bit & barrel of size 100mm with 51ip generator vii. as per is code 2720 (part 7 and 8), is 9198, is 10074, bs: 1377 astm d 698, d 1557 compression testing machine (200 tonnes capacity) with 0.1kn least count (digital) temperature controlled water tank for curing - 48"x24"x20" as per is code 1205 and astm d 36 softening point apparatus/ ring & ball appartus amc charges for 04 years after 01 year of compulsory warranty period.

Vaishali, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104578175 |Bid Value:₹ Refer Docs |EMD:₹ 50.00 K |Refer Docs

supply, installation, demonstration and training of laboratory equipment / laboratory equipment for earthwork/subgrade, granular sub-base, wbm/wmm, bitumen & emulsion, bituminous mixes, concrete testing and miscellaneous laboratory requirements for testing & quality control laboratory sheohar rural works department, government of bihar - equipment for sampling- digging tools pick axes, shovels, hammers, chisels etc. sieves-gi/brass frame dia 200 mm as per is 460(part 1)- fine aggregates and soils-10 mm, 9.5mm, 6.3mm, 5.6 mm, 4.75 mm, 3.35mm, 2.80 mm, 2.5mm, 2.36 mm, 2.00 mm, 1.70 mm, 1.18 mm, 1 mm, 850 micron, 710, 600, 500, 425, 355, 300, 250, 212, 180, 150, 90 and 75 micron with pan and cover equipment for testing of coarse aggregates-i.length & thickness gauges (flakiness & elongation index apparatus) ii. ref. standards: is:2720 (part 5), is:9259, bs 1377 liquid limit and plastic limit testing apparatus standard proctor density test apparatus with rammer (light compaction) iv. sand pouring cylinder with tray complete for field density test. v. sampling tins with lids 100 mm dia, 50 mm height vi. stop watch-0.5 sec sensitivity sub-base (granular sub base) sieves - brass frame dia 200 mm as per is 460(part 1) - coarse aggregates-125 mm, 106 mm, 100 mm, 90 mm, 80 mm, 75 mm, 63 mm, 53 mm, 50 mm 45 mm, 40 mm, 37.5 mm, 31.5 mm, 26.5 mm, 25 mm, 22.4 mm, 20 mm, 19 mm, 16 mm, 13.2 mm, 12.5 mm, 11.2 mm, 10 mm, 9.5 mm, 6.3 mm, 5.6 mm, 4.75 mm, 335mm, 2.80 mm, 2.5mm, 2.36mm size with lid and cover equipment for testing of coarse aggregates- l length & thickness gauges (flakiness & elongation index apparatus) ii. aggregate soundness test apparatus as per is code 2386 (part 4), is 9377 aggregate impact value test apparatus miscellaneous l as per is code 2720 (part 29) steel core cutter with dolly and hammer il water tank for soaking cbr moulds (4ft * 3ftl * 0.5ft) camber board iv. riffle box for 40mm/20mm base (wbm/wmm) i trays for measurement of tack quantity, ii. digital thermometers equipment for testing of concrete- slump cone ii. cube moulds (150mm * 150mm * 150mm) mortar cube moulds (70.6mm * 70.6mm * 70.6mm) iv. thickness gauge glassware & other accessories- spatulas, scoops, steel scales, measuring tape, casseroles, assorted sizes of enameled trays, porcelain dish, filter paper, funnel, glass marking pencils, heat resistant hand gloves, spirit levels, vernier calipers, mortar with rubber covered pestle reagents: hydrochloric acid, sodium hexametaphosphate, hydrogen peroxide, calcium carbide one set, trichloroethylene, benzene (500ml) earthwork/subgrade equipment for testing of soils-as per is code 2720 (part 2), is 12175-1987 rapid moisture meter complete with chemicals as per is code 2720(part 16), astm d 1883, bs 1377 lab cbr equipment (complete set) with 12 moulds gas burner, sand bath iv. balances- a) electronic/digital balance (1-2 kg) with the least count of 0.01 g b) electronic/digital balance (50-60 kg) v. oven (200) thermostatically/digital controlled base (wbm/wmm) equipment for testing of bitumen and emulsion- i. as per is code 1203 astm d5 penetration test apparatus with standard needles (digital) water bath (ambient to 100 deg * c ) digital controlled (50l capacity) tar viscometer iv. as per is code 13826 (part 1), astm d 2172, aashto t164 v. equipment for testing bituminous mixes- electrically operated centrifuge type bitumen extractor 1.5l capacity with il benzene vi. core cutting machine with bit & barrel of size 100mm with 5hp generator as per is code 2720 (part 7 and 8), is 9198, is 10074, bs: 1377 astm d 698, d 1557 compression testing machine (200 tonnes capacity) with 0.1kn least count (digital) vii. temperature controlled water tank for curing-48"x24"x20" as per is code 1205 and astm d 36 softening point apparatus/ ring & ball appartus amc charges for 04 years after 01 year of compulsory warranty period. (hindi document)

Sheohar, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104280999 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |25-09-2026 Ending Today

sealed quotations are invited from reputed and eligible manufacturers/ oems/authorized dealers/suppliers for supply, installation, demonstration and training of laboratory equipment for testing & quality control laboratory katihar, rural works department, government of bihar.

Buxar, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104281069 |Bid Value:₹ Refer Docs |EMD:₹ 50.00 K |25-09-2026 Ending Today

sealed quotations are invited from reputed and eligible manufacturers / oems / authorized dealers / suppliers for supply, installation, demonstration and training of laboratory equipment for testing & quality control laboratory.

Supaul, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104305550 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |25-09-2026 Ending Today

sealed quotations are invited from reputed and eligible manufacturers / oems / authorized dealers/suppliers for supply, installation, demonstration and training of laboratory equipment equipment for sampling- digging tools pick axes, shovels, hammers, chisels etc. sieves-gi/brass frame dia 200 mm as per is 460(part 1)- fine aggregates and soils-10 mm, 9.5mm, 6.3mm, 5.6 mm, 4.75 mm, 3.35mm, 2.80 mm, 2.5mm, 2.36 mm, 2.00 mm, 1.70 mm, 1.18 mm, 1 mas, 850 micron, 710, 600, 500, 425, 355, 300, 250, 212, 180, 150, 90 and 75 micron with pan and cover l equipment for testing of coarse aggregates-i.length thickness gauges (flakiness & elongation index apparatus) ref. standards: 15:2720 (part 5), 18:9259, bs 1377 liquid limit and plastic limit testing apparatus iii. standard proctor density test apparatus with rammer (light compaction) sand pouring cylinder with tray complete for field density test. sampling tins with lids 100 mm dia, 50 mm height vi. stop watch-0.5 sec sensitivity sub-hase (granular sub ilase) sieves - brass frame dia 200 mm as per is 460(part 1)- coarse aggregates-125 mm, 106 mm, 100 mm, 90 mm, 80 mm, 75 mm, 63 mm, 53 mm, 50 mm 45 mm, 40 mm, 37.5 mm, 31.5 mm, 26.5 mm, 25 mm, 22.4 mm, 20 mm, 19 mm, 16 mm, 13.2 mm, 12.5 mm, 11.2 mm, 10 mm, 9.5 mm, 6.3 mm, 5.6 mm, 4.75 mm, 335mm. 2.80 mm. 2.5mm, 2.36mm size with lid and cover euipment for testing of coarse aggregates length & thickness gauges (flakiness & elongation index apparatus) aggregate soundness test apparatus as per is code 2386 (part 4), is 9377 aggregate impact value test apparatus miscellaneous as per 18 code 2720 (part 29) steel core cutter with dolly and hammer water tank for soaking cbr moulds (4r * 3r * 1.5r) camber board -riffle bos for 40mm/20mm base (wbm/w) trays for measurement of tack quantity. -digital thermonseters quipment for testing of concrete- slu p cone cube moulds (150mm * 150mm * 150mm) mortar cube moulds (70.6mm * 70.6mm * 70.6mm) thickness gauge glassware & other accessories-spatulas, scoops, steel scales, measuring tape.casseroles, assorted sizes of enameled trays, porcelain dish, filter paper, funnel, glass marking pencils, heat resistant hand gloves, spirit levels, versiercalipers, mortar with rubber covered pestle reagents: hydrochloric acid, sodium hexansetaphosphate, hydrogen peroxide, calcium carbide one set, trichloroethylene, benzene (500ml) l rapid moisture meter complete with chemicals earthwork/subgrade equipment for testing of soils-as per is code 2720 (part 2), is 12175-1987 2 ii as per is code 2720(part 16), astm d 1883, bs 1377lab cbr equipment (complete set) with 12 moulds 3 iii. gas burner, sand bath 1 set balances-a) electronic/digital balance (1-2 kg) with the least count of 0.01 g iv. electronic/digital balance (50-60 kg) oven (200) thermostatically/digital controlled base (wbm/wmm equipment for testing of bitumen and emulsion- 71. 8 ii. as per is code 1203 astm d5 penetration test apparatus with standard needles (digital) water bath (ambient to 100c) digital controlled (501 capacity) iii. tar viscometer as per is code 13826 (part 1), astm d 2172, aashto t164 10 iv. equipment for testing bituminous mixes- electrically operated centrifuge type bitumen extractor 1.51. capacity with il benzene 11 v. core cutting machine with bit & barrel of size 100mm with 5hp generator 12 vi. as per is code 2720 (part 7 and 8), is 9198, is 10074, bs: 1377 astm d 698, d 1557 as per is compression testing machine (200 tonnes capacity) with 0.1kn least count (digital) vii. temperature controlled water tank for curing-48"x24"x20" as per is code 1205 and astm d 36 softening point apparatus/ ring & ball apparatus amc charges for 04 years after 01 year of compulsory warranty period for testing & quality control division.

Arrah, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104362741 |Bid Value:₹ Refer Docs |EMD:₹ 50.00 K |Refer Docs

supply, installation, demonstration and training of laboratory equipment for office of the assistant engineer, testing & quality control laboratory - earthwork/subgrade, equipment for testing of coarse aggregates, as per is code 2720 (part 29) steel core cutter with dolly and hammer, water tank for soaking cbr moulds (4ft * 3ft * 1.5ft), camber board, riffle box for 40mm/20mm, base (wbm/ymm), trays for measurement of tack quantity, digital thermometers, slump cone, cube moulds (150mm * 150mm * 150mm), mortar cube moulds (70.6mm * 70.6mm * 70.6mm), thickness gauge, glassware & other accessories- spatulas, scoops, steel scales, measuring tape, casseroles, assorted sizes of enameled trays, porcelain dish, filter paper, funnel, glass marking pencils, heat resistant hand gloves, spirit levels, vernier calipers, mortar with rubber covered pestle, reagents: hydrochloric acid, sodium hexametaphosphate, hydrogen peroxide, calcium carbide one set, trichloroethylene, benzene (500ml), equipment for testing of soils-as per is code 2720 (part 2), is 12175-1987 rapid moisture meter complete with chemicals, as per is code 2720(part 16), astm d 1883, bs 1377 lab cbr equipment (complete set) with 12 moulds, gas burner, sand bath, balances-, a) electronic/digital balance (1-2 kg) with the least count of 0.01 g, b) electronic/digital balance (50-60 kg), oven(200) thermostatically/digital controlled, base (wbm/wmm), as per is code 1203 astm d 5 penetration test apparatus with standard needles (digital), water bath (ambient to 100c) digital controlled (50l capacity), tar viscometer, as per is code 13826 (part 1), astm d 2172, aashto t164 equipment for testing bituminous mixes- electrically operated centrifuge type bitumen extractor 1.5l capacity with il benzene, core cutting machine with bit & barrel of size 100mm with 511p generator, as per is code 2720 (part 7 and 8), is 9198, is 10074, bs: 1377 astm d 698, d 1557 compression testing machine (200 tonnes capacity) with 0.1kn least count (digital), temperature controlled water tank for curing - 48"x24"x20", as per is code 1205 and astm d 36, softening point apparatus/ ring & ball appartus, amc charges for 04 years after 01 year of compulsory warranty period. (hindi document)

Araria, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104490552 |Bid Value:₹ Refer Docs |EMD:₹ 50.00 K |Refer Docs

authorized dealers / suppliers for supply, installation, demonstration and training of laboratory equipment for testing & quality control division, samastipur, rural works department - laboratory equipment for earthwork/sub grade, granular sub-base, wbm/wmm, bitumen & emulsion, bituminous mixes, concrete testing and miscellaneous laboratory requirements.

Samastipur, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104490562 |Bid Value:₹ Refer Docs |EMD:₹ 50.00 K |Refer Docs

supply, installation, demonstration and training of laboratory equipment for testing & quality control division siwan, rural works department, government of bihar - earthwork/subgrade, equipment for sampling- digging tools pick axes, shovels, hammers, chisels etc., sieves -gi/brass frame dia 200 mm as per is 460(part 1) - fine aggregates and soils-10 mm, 9.5mm, 6.3mm, 5.6 mm, 4.75 mm, 3.35mm, 2.80 mm, 2.5mm, 2.36 mm, 2.00 mm, 1.70 mm, 1.18 mm, 1 mm, 850 micron, 710, 600, 500, 425, 355, 300, 250, 212, 180, 150, 90 and 75 micron with pan and cover, i. equipment for tes ng of coarse aggregates-i. length & thickness gauges (flakiness & elonga on index apparatus), ii. ref. standards: is:2720 (part 5), is:9259, bs 1377 liquid limit and plas c limit tes ng apparatus, iii. standard proctor density test apparatus with rammer (light compac on), iv. sand pouring cylinder with tray complete for field density test., v. sampling ns with lids 100 mm dia, 50 mm height, vi. stop watch - 0.5 sec sensi vity, sieves - brass frame dia 200 mm as per is 460(part 1)-coarse aggregates-125 mm, 106 mm, 100 mm, 90 mm, 80 mm, 75 mm, 63 mm, 53 mm, 50 mm 45 mm, 40 mm, 37.5 mm; 31.5 mm, 26.5 mm, 25 mm, 22.4 mm, 20 mm, 19 mm, 16 mm, 13.2 mm, 12.5 mm, 11.2 mm, 10 mm, 9.5 mm, 6.3 mm, 5.6 mm, 4.75 mm, 335mm, 2.80 mm, 2.5mm, 2.36mm size with lid and cover, equipment for tes ng of coarse aggregates-, i. length & thickness gauges (flakiness & elonga on index apparatus), ii. aggregate soundness test apparatus, iii. as per is code 2386 (part 4), is 9377 aggregate impact value test apparatus, miscellancous, i. as per is code 2720 (part 29) steel core cu er with dolly and hammer, ii. water tank for soaking cbr moulds (4 x 3 x1.5), iii. camber board, iv. riffle box for 40mm/20mm, base (wbm/wmm), i. trays for measurement of tack quan ty,, ii. digital thermometers, equipment for tes ng of concrete, i. slump cone, ii. cube moulds (150 mm x 150 mm x 150 mm), iii. mortar cube moulds (70.6 mm x 70.6 mm x 70.6 mm), iv. thickness gauge, glassware & other accessories- spatulas, scoops, steel scales, measuring tape, casseroles, assorted sizes of enameled trays, porcelain dish, filter paper, funnel, glass marking pencils, heat resistant hand gloves, spirit levels, vernier calipers, mortar with rubber covered pestle, reagents: hydrochloric acid, sodium hexametaphosphate, hydrogen peroxide, calcium carbide one set, trichloroethylene, benzene (500ml), i. equipment for tes ng of soils-as per is code 2720 (part 2), is 12175-1987 rapid moisture meter complete with chemicals, ii. as per is code 2720(part 16), astm d 1883, bs 1377 lab cbr equipment (complete set) with 12 moulds, iii. gas burner, sand bath, iv. balances- a) electronic/digital balance (1-2 kg) with the least count of 0.01 g, b) electronic/digital balance (50-60 kg), v. oven(200") thermosta cally/digital controlled, base (wbm/wmm), equipment for testing of bitumen and emulsion-, i. as per is code 1203 astm d 5 penetra on test apparatus with standard needles (digital), ii. water bath (ambient to 100c) digital controlled (50l capacity), iii. tar viscometer, iv. as per is code 13826 (part 1), astm d 2172, aashto t164 equipment for tes ng bituminous mixes- electrically operated centrifuge type bitumen extractor 1.51. capacity with 1l benzene, v. core cu ng machine with bit & barrel of size 100mm with 5hp generator, vi. as per is code 2720 (part 7 and 8), is 9198, is 10074, bs:1377 astm d 698, d 1557 compression tes ng machine (200 tonnes capacity) with 0.1kn least count (digital), vii. temperature controlled water tank for curing 48"x24"x20".

Siwan, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104490573 |Bid Value:₹ Refer Docs |EMD:₹ 50.00 K |Refer Docs

dealers/supply, installation, demonstration and training of laboratory equipment of testing & quality control laboratory chapra-02 rural works department, government of bihar - laboratory equipment for earthworks/subgrade, granular sub-base, wbm/wmm, bitumen & emulsion, bituminous mixes, concrete testing and miscellaneous laboratory requirements.

Chapara, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104490603 |Bid Value:₹ Refer Docs |EMD:₹ 50.00 K |29-09-2026 4 Days Left

sealed quotation are invited from reputed and eligible manufactures/oems/authorized dealers/supply, installation, demonstration and training of laboratory equipment of testing & quality control division.

Chapara, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104500189 |Bid Value:₹ Refer Docs |EMD:₹ 50.00 K |25-09-2026 Ending Today

supply, installation, demonstration and training of laboratory equipment for testing & quality control division, siwan. scope of supply: laboratory equipment for earthwork/sub-grade/granular sub-base/wmm/bitumen/bituminous/hot mix/cold mix/laboratory requirements. the item and minimum permissible rates are in the detailed quotation document.

Siwan, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104578176 |Bid Value:₹ Refer Docs |EMD:₹ 50.00 K |02-10-2026 7 Days Left

sealed quotations are invited from reputed and eligible manufacturers/oems/authorized dealers / suppliers for supply, installation, demonstration and training of laboratory equipment equipment for sampling-digging tools pick axes, shovels, hammers, chisels etc. sieves-gi/brass frame dia 200 mm as per 15 460(part 1)- fine aggregates and soils-10 mm, 9.5mm, 6.3mm, 5.6 mm, 4.75 mm, 3.35mm, 2.80 mm. 2.5mm, 2.36 mm, 2.00 mm, 1.70 mm, 1.18 mm, 1 mm, 850 micron, 710, 600, 500, 425, 355, 300, 250, 212, 180, 150, 90 and 75 micron with pan and cover l equipment for testing of coarse aggregates-length & thickness gauges (flakiness & elongation index apparatus) ref. standards: 15:2720 (part 5), is:9259, bs 1377 liquid limit and plastic limit testing apparatus iii. standard proctor density test apparatus with rammer (light compaction) sand pouring cylinder with tray complete for field density test. sampling tins with lids 100 mm dia, 50 mm height vi. stop watch-0.5 sec sensitivity sub-base (granular sub base) sieves - brass frame dia 200 mm as per 15 460(part 1)- coarse aggregates-125 mm, 106 mm, 100 mm, 90 mm, 80 mm, 75 mm, 63 mm, 53 mm, 50 mm 45 mm, 40 mm. 37.5 mm, 31.5 mm, 26.5 mm. 25 mm, 22.4 mm, 20 mm, 19 mm, 16 mm, 13.2 mm, 12.5 mm, 11.2 mm, 10 mm, 9.5 mm, 6.3 mm, 5.6 mm. 4.75 mm. 335mm, 2.80 mm, 2.5mm, 2.36mm size with lid and cover equinment for testine of coarse aggregates length & thickness gauges(flakiness & elongation index apparatus) aggregate soundness test apparatus as per is code 2386 (part 4), is 9377 aggregate impact value test apparatus miscellaneous as per is code 2720 (part 29) steel core cutter with dolly and hammer il water tank for soaking cbr moulds (4 ft x 3ft x 1.5 ft) camber board. iv. riffle box for 40mm/20mm base (wbm/wmm) l trays for measurement of tack quantity, ii. digital thermometers equipment for testing of concrete- slump cone ii. cube moulds (150 mm x 150 mm x 150 mm) iii. mortar cube moulds (70.6 mm x 70.6 mm x 70.6 mm) iv. thickness gauge glassware & other accessories- spatulas, scoops, steel scales, measuring tape.casseroles, assorted sizes of enameled trays, porcelain dish, filter paper, funnel, glass marking pencils, heat resistant hand gloves, spirit levels, vernier calipers, mortar with rubber covered pestle reagents: hydrochloric acid, sodium hexametaphosphate, hydrogen peroxide, calcium carbide one set, trichloroethylene, benzene (500ml) l equipment for testing of soils-as per is code 2720 (part 2), is 12175-1987 rapid moisture meter complete with chemicals as per is code 2720(part 16). astm d 1883, bs 1377 lab cbr equipment (complete set) with 12 moulds iii. gas burner, sand bath iv. balances- a) electronic/digital balance (1-2 kg) with the least count of 0.01 g b) electronic/digital balance (50-60 kg) vi oven(200) thermostatically/digital controlled base (wbm/wmm) equipment for testing of bitumen and emulsion- as per is code 1203 astm d 5 penetration test apparatus with standard needles (digital) water bath (ambient to 100c) digital controlled (501. capacity) iii. tar viscometer as per is code 13826 (part 1), astm d 2172, aashto t164 iv. equipment for testing bituminous mixes- electrically operated centrifuge type bitumen extractor 1.51. capacity with ii. benzene core cutting machine with bit & barrel of size 100mm with 5hp generator as per is code 2720 (part 7 and 8), is 9198, is 10074, bs:1377 astm d 698, d 1557 compression testing machine (200 tonnes capacity) with 0.1kn least count (digital) vii. temperature controlled water tank for curing-48"x24"x20" as per is code 1205 and astm d 36 softening point apparatus/ ring & ball appartus amc charges for 04 years after 01 year of compulsory warranty period for testing & quality control laboratory.

Buxar, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104578227 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |Refer Docs

supply, installation, demonstration and training of laboratory equipment (earthwork/subgrade equipment for sampling- digging tools pick axes, shovels, hammers, chisels etc. sieves-gi/brass frame dia 200 mm as per is 460(part 1) - fine aggregates and soils-10 mm, 9.5mm, 6.3mm, 5.6 mm, 4.75 mm, 3.35mm, 2.80 mm, 2.5mm, 2.36 mm, 2.00 mm, 1.70 mm, 1.18 mm, 1 mm, 850 micron, 710, 600, 500, 425, 355, 300, 250, 212, 180, 150, 90 and 75 micron with pan and cover i. equipment for testing of coarse aggregates-i.length & thickness gauges (flakiness & elongation index apparatus) ii. ref. standards: is:2720 (part 5), is:9259, bs 1377 liquid limit and plastic limit testing apparatus iii. standard proctor density test apparatus with rammer (light compaction) iv. sand pouring cylinder with tray complete for field density test. v. sampling tins with lids 100 mm dia, 50 mm height vi. stop watch-0.5 sec sensitivity sub-base (granular sub base) sieves - brass frame dia 200 mm as per is 460(part 1) - coarse aggregates-125 mm, 106 mm, 100 mm, 90 mm, 80 mm, 75 mm, 63 mm, 53 mm, 50 mm 45 mm, 40 mm, 37.5 mm, 31.5 mm, 26.5 mm, 25 mm, 22.4 mm, 20 mm, 19 mm, 16 mm, 13.2 mm, 12.5 mm, 11.2 mm, 10 mm, 9.5 mm, 6.3 mm, 5.6 mm, 4.75 mm, 335mm, 2.80 mm, 2.5mm, 2.36mm size with lid and cover equipment for testing of coarse aggregates- i. length & thickness gauges (flakiness & elongation index apparatus) ii. aggregate soundness test apparatus as per is code 2386 (part 4), is 9377 aggregate impact value test apparatus miscellaneous i. as per is code 2720 (part 29) steel core cutter with dolly and hammer ii. water tank for soaking cbr moulds (4 ft x 3ft x 1.5 ft) camber board iv. riffle box for 40mm/20mm base (wbm/wmm) i. trays for measurement of tack quantity, ii. digital thermometers equipment for testing of concrete- i. slump cone ii. cube moulds (150 mm x 150 mm x 150 mm) iv. mortar cube moulds (70.6 mm x 70.6 mm x 70.6 mm) thickness gauge glassware & other accessories- spatulas, scoops, steel scales, measuring tape, casseroles, assorted sizes of enameled trays, porcelain dish, filter paper, funnel, glass marking pencils, heat resistant hand gloves, spirit levels, vernier calipers, mortar with rubber covered pestle reagents: hydrochloric acid, sodium hexametaphosphate, hydrogen peroxide, calcium carbide one set, trichloroethylene, benzene (500ml) earthwork/subgrade i. equipment for testing of soils-as per is code 2720 (part 2), is 12175 - 1987 rapid moisture meter complete with chemicals ii. as per is code 2720(part 16), astm d 1883, bs 1377 lab cbr equipment (complete set) with 12 moulds gas burner, sand bath iv. balances- a) electronic/digital balance (1-2 kg) with the least count of 0.01 g b) electronic/digital balance (50-60 kg) v. oven(200) thermostatically/digital controlled base (wbm/wmm) equipment for testing of bitumen and emulsion- i. as per is code 1203 astm d5 penetration test apparatus with standard needles (digital) ii. water bath (ambient to 100 deg * c ) digital controlled (50l capacity) iii. tar viscometer iv. as per is code 13826 (part 1), astm d 2172, aashto t164 v. equipment for testing bituminous mixes- electrically operated centrifuge type bitumen extractor 1.5l capacity with il benzene vi. core cutting machine with bit & barrel of size 100mm with 5hp generator as per is code 2720 (part 7 and 8), is 9198, is 10074, bs:1377 astm d 698, d 1557 compression testing machine (200 tonnes capacity) with 0.1kn least count (digital) vii. temperature controlled water tank for curing - 48"x24"x20" as per is code 1205 and astm d 36 softening point apparatus/ ring & ball appartus amc charges for 04 years after 01 year of compulsory warranty period) of testing and quality control, laboratory, gopalganj rural works department.

Not Classified, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

T247 ID-104578260 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |Refer Docs

supply, installation, demonstration and training of laboratory equipment (laboratory equipment for earthwork/subgrade, granular sub-base, wbm/wmm, bitumen & emulsion, bituminous mixes, concrete testing and miscellaneous laboratory requirements) for testing & quality control laboratory nawada rural works department, government of bihar. the equipment shall be of suitable quality and conform to applicable bis/is, irc, mord/morth and other relevant standards/specifications.

Nawada, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

Latest Thermometer Tenders in Rural Works Department

18 Live Thermometer Tenders in Rural Works Department 2026