Find the latest bolt tenders in south central railway for 2026 from government departments, corporations and state PSUs. Get tender details and bidding information.
FILTERS
supply of set of two different fasteners required for fixing of line contactors & c145 mobile bits in ac electric loco motives as follows. 1) set of ht hex. head bolt half threaded size: m6 x 35mm, grade: 8.8 as per is: 1364(part-2) along with suitable two m6 nuts, grade: 8.0 as per is: 1364(part-3), two flat washers as per is: 2016 and one spring washer a s per is: 3063. qty/set. = 01 set. 2) set of ht hex. head bolt full threaded size: m6 x 25mm, grade: 8.8 as per is: 1364( part-2) along with suitable two m6 nuts, grade: 8.0 as per is: 1364(part-3), one flat washer as per is: 2016 and one spri ng washer as per is: 3063. qty/set. = 01 set. makes: tvs/ lps/ unbrako/ bmi/ dfl/ sundeep/ bimco (or) its similar. note : (1) ten samples of each set should be got approved before effecting bulk supply. (2) firm shall quote any one make fo r the tendered description along with valid authorization, if vendor offers/bids for more than one make or if the firm men tions, 'as per tender' in their bid(s), their offer will be summarily rejected. [ warranty period: 30 months after the date of delivery ] ]
View Insights
supply of set of hex head bolts of different sizes required for fixing of gauge board and gauges fixing on the board and copper pipeline clamps provision in horn incoming pipe lines in ac electric locomotives. a) hex head bolt full thread ed size: m6 x 35 mm, grade: 8.8 as per is: 1364(part2), along with suitable one nut, grade: 8.0 as per is: 1364(part-3), two flat washers as per is: 2016 and two spring washers as per is: 3063. qty/set. = 01 set. b) hex head bolt full thread ed size: m6 x 25 mm, grade: 8.8 as per is: 1364(part-2), along with suitable one nut, grade: 8.0 as per is: 1364(part-3), two flat washers as per is: 2016 and two spring washers as per is: 3063. qty/set. = 01 set. c) hex head bolt full thread ed size: m5 x 25 mm, grade: 8.8 as per is: 1364(part-2), along with suitable one nut, grade: 8.0 as per is: 1364(part-3), two flat washers as per is: 2016 and two spring washers as per is: 3063. qty/set. = 01 set. d) hex head bolt full thread ed size: m4 x 40 mm, grade: 8.8 as per is: 1364(part-2), along with suitable one nut, grade: 8.0 as per is: 1364(part-3), two flat washers as per is: 2016 and two spring washers as per is: 3063. qty/set. = 01 set. makes: unbrako/ tvs/ dfl/ lps/ sundeep/ bimco or similar. note: [1] all dimensions are in mm. [2] all materials are zinc coated. [3] one sample s et of each subject item should be got approved before effecting bulk supply, [4] firm shall quote for any one make ment ioned in the tendered description. if a vendor offers/bids for more than one make or if the firm mentions, 'as per tender' in their bid(s), their offer will be summarily rejected. [ warranty period: 30 months after the date of delivery ] ]
supply of oil dummy bolt along with suitable copper washer for oil pump motor as per drawing no: b/trs/aux/4/36 2, ref nos: 1 & 2 or latest if any. note: five samples should be got approved before effecting bulk supply. [ warranty p eriod: 30 months after the date of delivery ] ]
supply of set of hex. head bolt full threaded size: m10 x 50 x 1.5 mm as per is: 1364 part ii, grade 8.8 along with s uitable one m10 nut as per is: 1364 part iii, grade: 8.0, one flat washer as per is: 2016 and one spring washer as per is : 3063. all fasteners shall be phosphate coated. makes: tvs/dfl/unbrako/lps/bmi (or) its similar. note: (1) ten sample sets should be got approved before effecting bulk supply. (2) firm shall quote any one make for the tendered descriptio n along with valid authorization, if vendor offers/bids for more than one make or if the firm mentions, 'as per tender' in t heir bid(s), their offer will be summarily rejected. [ warranty period: 30 months after the date of delivery ] ]
supply of hex. head bolt half threaded size: m10 x 65 mm as per stainless steel grade a2-70 & is: 1367 part 14 -19 84 along with suitable one stainless steel grade a2-70 & is: 1367 part 14 -1984 wire mesh washer. makes: tvs/dfl/unb rako/lps/bmi (or) its similar. note:[1] firm shall quote any one make for the tendered description, if vendor offers/bids f or more than one make or if the firm mentions, 'as per tender' in their bid(s), their offer will be summarily rejected. [2] t en samples should be got approved before effecting bulk supply. [ warranty period: 30 months after the date of deliv ery ] ]
supply of set of high tensile hex. head bolt full threaded size: m16 x 60 x 2.0 mm as per is: 1364 part ii, grade 8.8 along with suitable one m16 nut as per is: 1364 part iii, grade: 8.0, two flat washers as per is: 2016 and one spring wa sher as per is: 3063 for fixing mph in 3-phase locos. all fasteners shall be zinc coated. makes: tvs/dfl/unbrako/lps/bm i (or) its similar. note: (1) five sample sets should be got approved before effecting bulk supply. (2) firm shall quote any one make for the tendered description along with valid authorization, if vendor offers/bids for more than one make or if the firm mentions, 'as per tender' in their bid(s), their offer will be summarily rejected. [ warranty period: 30 months after the date of delivery ] ]
supply of set of high tensile hex head bolt full threaded size: m12 x 50 x 1.75 mm, grade: 8.8 as per is: 1364(part- 2) along with suitable m12 nut, grade: 8.0 as per is: 1364(part-3), two flat washers as per is: 2016 and one spring was her as per is: 3063. all the fasteners are zinc coated. makes: unbrako/ tvs/ bmi/ dfl/sundeep/ bimco or its similar. not e:ten sample sets should be got approved before effecting bulk supply. [ warranty period: 30 months after the date o f delivery ] ]
supply of set of transformer fixing bolts & plates required for wag-9/ wap-7 locos as per clw specification no. cl w/es/3/0069, alt. d or latest if any consisting of 02 items as follows. 1) hexagonal bolt m24, class 8.8, fig. b of clw drg . no. clw/es/3/sk-1/0069, alt. d or latest if any. qty/set. = 16 nos. makes: tvs or lps or unbrako as per sheet 4 of cl w specification no. clw/es/3/0069, alt. d or latest. 2) locking tab, fig. d of clw drg. no. clw/es/3/sk-2/0069, alt. d or latest if any. qty/set. = 08 nos. note: one sample of each item should be got approved before effecting bulk supply. 3) firm shall quote any one make for the tendered description, if vendor offers/bids for more than one make or if the firm mentions, 'as per tender' in their bid(s), their offer will be summarily rejected. [ warranty period: 30 months after the date of delivery ] ]
supply of hexagonal head bolt with nut, spring washers and flat washers as per the details given below. 1.hexagonal head bolt size:m10 is:1364 & is:1367(pt3), property clause 8.8 as per drawing no . b/trs/bogie/4/239 alt-a ref no.2 qty/set 1.no. 2. slotted nut size:m10 is:2232 & is:1367(pt6), prop erty clause 8 as per drawing no. b/trs/bogie/4/239 alt-a ref no.3 qty/set 1.no. 3. plain washer size b10, is:2016/1967(2001) as per drawing no.b/trs/bogie/4/239 alt-a ref no.5. qty/set 1.no. 4. sprin g washer, size:b10 is: 3063/1994(2004) as per drawing no.b/trs/bogie/4/239 alt-a ref no.6 qty/set 1.no note :-nut and flat washer are to be coated with zinc as per is:1573/1986 and spring washer is t o be phosphate as per 3618/1966. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] diesel stores depot/kzj, scr
supply of hex head bolt complete for axle box roller bearing to icf drg no. emu/m 0-2-008 alt-nr/nil, galvd [ warranty period: 30 months after the date of delivery ] ] sse/mech.&wheel/lallaguda,
supply of hex head bolt m20x120n (sh to is:8549-1980) confirming to specification no. is: 1364 (pa rt-1) b, 92 5.6, n, ce, coating as per mdts-057 (rev-nil) and to rcf drawing no.aw05100, item-19, alt.-f /nil. [ warranty period: 30 months after the date of delivery ] ]
supply of set of hex. head bolt size: m12 x 50 x 1.75mm full threaded as per grade a2-70 along with suitable one fl at washer & one spring washer for fixing of vcb base plate. makes: tvs/ apl/ unbrako/ kundan or its similar. note: fiv e sample sets should be got approved before effecting bulk supply. [ warranty period: 30 months after the date of del ivery ] ]
supply of set of galvanized hexagonal head bolt full thread with nut,plain washer and spring washer of size m5x25 mm with suitable standard plain washer & spring washers to is spec no: 1364/94 part-2, clau se 4.4 note: one set shall consist of hexagonal head bolt-01 no, hex nut-01 no, plain washers-02 nos and spring washer-01 no. complete in assembled condition. required makes: unbroko, lps, dfl or tvs [ warra nty period: 30 months after the date of delivery ] ]
supply of hex head bolt m24x100/54x3p & m24x110/54x3p zn plated (passivaated) as per is-1 364-s-8.8 gr.a to is-1367. each set contains 12 nos. of each item [ warranty period: 30 months after th e date of delivery ] ]
supply of key bolt with nut, spring washer & 4 dia split pinto rdso drg.no.sk.69594, it em-9, alt.36 [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
supply of bolt (for primary vertical stop) to rcf drg no : lw01116 alt : nil [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] mechanical &
supply of galvanized high tensile hexagonal head full threaded bolt of size m10x65 mm with suitable standard nut - 01no, plain washer-02 nos,check nut - 01 nos. and spring washer-01 nos complete in asse mbled condition as per is spec no is: 1364/94 part - 2, clause 8.8. required makes: lps, dlf, tvs (or) unbr oko. [ warranty period: 30 months after the date of delivery ] ] - galvanized high tensile hexagonal head full threaded bolt of size m10x65 mm
supply of set of galvanized hexa head. set consists of 04 items: (1) galvanized hexagonal head bolt of size m 8x60 mm to is. spec. 1364/94, part. 2 grade 8.8 - 01 no. (2) suitable nut as per to is: 1367 (pt. 14) - 01 no. per set (3) suitable flat washers - 01 no. per set (4) suitable spring washers - 01 no. per set [ war ranty period: 30 months after the date of delivery ] ] - set of galvanized hexa head. set consists of 04 items
supply of set of hex head bolts of different sizes required for maintenance of tmb, mrb & ocb filters in ac e lectric locomotives. set consists of 06 items. set details as follows. a) hex head bolt full threaded size: m8 x 15 mm, grade: 8.8 as per is:1364(part-2), along with suitable one nut, grade: 8.0 as per is:1364(part-3), two flat w ashers as per is:2016 and two spring washers as per is: 3063. qty/set.-01 set. b) hex head bolt full threaded si ze: m8 x 20mm, grade: 8.8 as per is:1364(part-2), along with suitable one nut, grade: 8.0 as per is:1364(part-3), two flat washers as per is:2016 and two spring washers as per is: 3063. qty/set.- 01 set. c) hex head bolt full t hreaded size: m8 x 25mm, grade: 8.8 as per is:1364(part-2), along with suitable one nut, grade: 8.0 as per is:1 364(part-3), two flat washers as per is: 2016 and two spring washers as per is: 3063. qty/set.-01 set. d) hex he ad bolt full threaded size: m8 x30mm, grade: 8.8 as per is: 1364(part-2), along with suitable one nut, grade: 8.0 as per is: 1364(part-3), two flat washersas per is: 2016 and two spring washers as per is: 3063.qty/set. = 01 s et. e) hex head bolt full threaded size: m8 x45mm, grade: 8.8 as per is: 1364(part-2), along with suitable one n ut, grade: 8.0 as per is:1364(part-3), two flat washers as per is:2016 and two spring washers as per is:3063. qt y/set.-01 set. f) hex head bolt full threaded size: m8 x70mm, grade: 8.8 as per is:1364(part-2), along with suita ble one nut, grade: 8.0 as per is:1364(part-3), two flat washers as per is:2016 and two spring washers as per is :3063. qty/set.-01 set. note: 1) all dimensions are in mm. 2)all are zinc coated. 3) one sample set should be got approved before effecting bulk supply. 4) firm must mention the make of the offered material while participatin g in the tender. [ warranty period: 30 months after the date of delivery ] ] - set of hex head bolts of different sizes required for maintenance of tmb, mrb & ocb filters in ac electric locomotives.
supply of "hex head bolt (m16 x 120) with hex nut (m16) with split pin (4 x 22)for brake head to icf drawing no.t-3-1-619,alt.e/2.item no.11, 12 & 13." [ warranty period: 30 months aft er the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] bogie shop, rayanapadu, - "hex head bolt (m16 x 120) with hex nut (m16) with split pin (4 x 22)for brake head to icf drawing no.t-3-1-619,alt.e/2.item no.11, 12 & 13."
LOADING...
