Find the latest pins tenders in south central railway for 2026 from government departments, corporations and state PSUs. Get tender details and bidding information.
FILTERS
supply of pin (dia 45x300) for bogie bolster suspension to icf drg. no.emu/m-0-5-007, alt n/3. [ warranty period: 30 months after the date of delivery ] ] mechanical & - pin (dia 45x300) for bogie bolster suspension to icf drg. no.emu/m-0-5-007, alt n/3.
View Insights
supply of metal clad plug , current rating : 20 amps, rated operating voltage 250 v, operating temp erature - 25 to 40 degrees c no of poles 2 pin (p+n) + scraping earth operating frequency 50 hz, ingress protection ip 30, standard compliance iec60309 - 1 & 3. [ warranty period: 30 months after the date of d elivery ] ] - metal clad plug
supply of set of hex head bolts of different sizes required for fixing of gauge board and gauges fixing on the board and copper pipeline clamps provision in horn incoming pipe lines in ac electric locomotives. a) hex head bolt full thread ed size: m6 x 35 mm, grade: 8.8 as per is: 1364(part2), along with suitable one nut, grade: 8.0 as per is: 1364(part-3), two flat washers as per is: 2016 and two spring washers as per is: 3063. qty/set. = 01 set. b) hex head bolt full thread ed size: m6 x 25 mm, grade: 8.8 as per is: 1364(part-2), along with suitable one nut, grade: 8.0 as per is: 1364(part-3), two flat washers as per is: 2016 and two spring washers as per is: 3063. qty/set. = 01 set. c) hex head bolt full thread ed size: m5 x 25 mm, grade: 8.8 as per is: 1364(part-2), along with suitable one nut, grade: 8.0 as per is: 1364(part-3), two flat washers as per is: 2016 and two spring washers as per is: 3063. qty/set. = 01 set. d) hex head bolt full thread ed size: m4 x 40 mm, grade: 8.8 as per is: 1364(part-2), along with suitable one nut, grade: 8.0 as per is: 1364(part-3), two flat washers as per is: 2016 and two spring washers as per is: 3063. qty/set. = 01 set. makes: unbrako/ tvs/ dfl/ lps/ sundeep/ bimco or similar. note: [1] all dimensions are in mm. [2] all materials are zinc coated. [3] one sample s et of each subject item should be got approved before effecting bulk supply, [4] firm shall quote for any one make ment ioned in the tendered description. if a vendor offers/bids for more than one make or if the firm mentions, 'as per tender' in their bid(s), their offer will be summarily rejected. [ warranty period: 30 months after the date of delivery ] ]
supply of oil dummy bolt along with suitable copper washer for oil pump motor as per drawing no: b/trs/aux/4/36 2, ref nos: 1 & 2 or latest if any. note: five samples should be got approved before effecting bulk supply. [ warranty p eriod: 30 months after the date of delivery ] ]
supply of set of transformer fixing bolts & plates required for wag-9/ wap-7 locos as per clw specification no. cl w/es/3/0069, alt. d or latest if any consisting of 02 items as follows. 1) hexagonal bolt m24, class 8.8, fig. b of clw drg . no. clw/es/3/sk-1/0069, alt. d or latest if any. qty/set. = 16 nos. makes: tvs or lps or unbrako as per sheet 4 of cl w specification no. clw/es/3/0069, alt. d or latest. 2) locking tab, fig. d of clw drg. no. clw/es/3/sk-2/0069, alt. d or latest if any. qty/set. = 08 nos. note: one sample of each item should be got approved before effecting bulk supply. 3) firm shall quote any one make for the tendered description, if vendor offers/bids for more than one make or if the firm mentions, 'as per tender' in their bid(s), their offer will be summarily rejected. [ warranty period: 30 months after the date of delivery ] ]
supply of set of pin clevis, bush & dowel sleeve as under: 1. pin clevis (brake cylinder) part no. 778111 qty. 150 n o's/set. 2. bush part no. c140445 qty. 150 no's/set. 3. dowel sleeve part no. c140446 qty. 150 no's/set. or similar suita ble for fitment in knorr make brake cylinder. ]
supply of set of hex. head bolt size: m12 x 50 x 1.75mm full threaded as per grade a2-70 along with suitable one fl at washer & one spring washer for fixing of vcb base plate. makes: tvs/ apl/ unbrako/ kundan or its similar. note: fiv e sample sets should be got approved before effecting bulk supply. [ warranty period: 30 months after the date of del ivery ] ]
supply of mini hinge and nut plate made of stainless steel 304 equivalent to dirak part no. 354 - 2160.04 - 00000 ( mini hinge) & 370 - 0438.04 - 00907 (nut plate). one set consists of 1 no. of mini hinge and 2 nos. of nut plates. make a cceptable : dirak, southco, arihant, darshana. oem or authorized dealer only to quote with documentary evidenc e. [ warranty period: 30 months after the date of delivery ] ] sse/ac/chz, scr
supply of circlip a-115 for modified axle box guide arrangement icf drawing no: icf/sk 0-1-182, i tem-3, alt-e [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] bogie shop, rayanapadu,
supply of modified lavatory latch with indicator (stainless steel) to icf drg no : icf/s k-5-6-083,col.iii, alt.c (small). [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] mechanical & - modified lavatory latch with indicator (stainless steel) to icf drg no : icf/sk-5-6-083,col.iii, alt.c (small).
supply of set of hex head bolts of different sizes required for maintenance of tmb, mrb & ocb filters in ac e lectric locomotives. set consists of 06 items. set details as follows. a) hex head bolt full threaded size: m8 x 15 mm, grade: 8.8 as per is:1364(part-2), along with suitable one nut, grade: 8.0 as per is:1364(part-3), two flat w ashers as per is:2016 and two spring washers as per is: 3063. qty/set.-01 set. b) hex head bolt full threaded si ze: m8 x 20mm, grade: 8.8 as per is:1364(part-2), along with suitable one nut, grade: 8.0 as per is:1364(part-3), two flat washers as per is:2016 and two spring washers as per is: 3063. qty/set.- 01 set. c) hex head bolt full t hreaded size: m8 x 25mm, grade: 8.8 as per is:1364(part-2), along with suitable one nut, grade: 8.0 as per is:1 364(part-3), two flat washers as per is: 2016 and two spring washers as per is: 3063. qty/set.-01 set. d) hex he ad bolt full threaded size: m8 x30mm, grade: 8.8 as per is: 1364(part-2), along with suitable one nut, grade: 8.0 as per is: 1364(part-3), two flat washersas per is: 2016 and two spring washers as per is: 3063.qty/set. = 01 s et. e) hex head bolt full threaded size: m8 x45mm, grade: 8.8 as per is: 1364(part-2), along with suitable one n ut, grade: 8.0 as per is:1364(part-3), two flat washers as per is:2016 and two spring washers as per is:3063. qt y/set.-01 set. f) hex head bolt full threaded size: m8 x70mm, grade: 8.8 as per is:1364(part-2), along with suita ble one nut, grade: 8.0 as per is:1364(part-3), two flat washers as per is:2016 and two spring washers as per is :3063. qty/set.-01 set. note: 1) all dimensions are in mm. 2)all are zinc coated. 3) one sample set should be got approved before effecting bulk supply. 4) firm must mention the make of the offered material while participatin g in the tender. [ warranty period: 30 months after the date of delivery ] ] - set of hex head bolts of different sizes required for maintenance of tmb, mrb & ocb filters in ac electric locomotives.
supply of hexagonal screw full thread with one flat washer,one spring washer and nut size:m10x1.5 mm,60 degrees metric pitch x 25 mm long to be coated with cadmium as per is:1572.the hexagonal screw and nut to be as per is:1364 & 1367,property class p.4.6 the flat washer to be as per is:2016 and single coil spring washer to be as per is:3063/1 972. [ warranty period: 30 months after the date of delivery ] ] - hexagonal screw full thread
supply of set of galvanized high tensile hexagonal head bolt & fasteners. set consisting of 06 items: ( 1) high tensile hexagonal head bolt m12 x 65 mm with one hole of 3.5 dia. at 10 mm distance from end & suitable for 03 mm split pin, property class 8.8 conforming to is 1363 - 01 no/set (2) hex nut property clas s 8 conforming to is 1363 - 01 no/set (3) hex lock nut to is 1364 - 01 no/set (4) spring washer conforming to is 3063 - 01 no/set (5) plain washers conforming to is 2016 - 02 nos./set (6) square washers of size 40x 40x2 mm thick - 02 nos./set all are suitable for m12 bolt. [ warranty period: 30 months after the date of delivery ] ] - set of galvanized high tensile hexagonal head bolt & fasteners.
LOADING...
