FILTERS
supply of srphc82360155-hakim programmable valve shunt system: should allow surgeon to non in vasively change the opening pressure between 30mm h2o to 200mm h2o in 18 steps in plus / minus 10mm h2o pressure increment settings. should be supplied with programmable valve, 120cm distal catheter without siphon guard, plastic connector, 14cm ventricular catheter, stainless steel stylet and plastic priming adaptor. valve positioning veryfication system for valve pressure adjustment sh ould be supplied during surgery and follow up at free of cost. should be mri compatible. suitability as per iso or bis or fda or ce or cdsco approval. ]
View Insights
supply of rate contract for manufacture and supply of galvanised metal liner to rdso drawing no.t-3740 (alt .7), for use with erc mk-iii flat toe on concrete sleeper, with latest alteration if any, as amended up to date of ten der notice and conforming to irs specification t-56-2025 for metal liners for use with elastic rail clips (first revisi on - april 2025), with latest amendment if any, as amended up to date of tender notice. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 la cs ] ]
corrigendum : supply of safety guard assembly for angle cock (bp&fp) for wap7/wag9 locos as per clw drg. no. 1 209- 00.340-215. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of roller for servomotor of 1500a reverser and ctf to els/bzas drg. no: b/trs/htc/4/307 (or) latest. material: phosph orus bronze, is 7811-1985. note: 1) supply by sources as per clw item id: 2100589 and 2100649 in ireps vendor directory. 2) one sample to be got approved before effecting bulk supply. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of hvn-66 insulating liner ,cut liner at fish plated joint for use with psc sleeper (rt-2496 ) suitable for 60kg(uic)/ 60e1 & 52 kg rails (drawings and item details as mentioned in set document are applicable) drg: (rdso) rt- 10232 to rt-10234 spec: (rdso) irs specification t-44, 2025, third revision set doc: set documents for rt-10233-10234 [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 la cs ] ]
supply of straight metric metal thread end fitting suitable to conduit size nw 29 having thread size m3 2 x 1.5 with hexagonal metric lock nut made of nickel plated brass of size m32 x 1.5 with suitable o-ring an d washer confirming to rdso specification no. rdso/pe/spec/ac/0138-2009 (rev.1) annexure-a, table a-5 , sl. no. 9. [ warranty period: 30 months after the date of delivery ] ]
supply of frame for four seater back rest to rcf drg no lr 61132 col i item 1 alt nil/l atest [ warranty period: 30 months after the date of delivery ] ]
supply of maintenance kit for 36 months of schunk make pantograph model wbl 22.03 consisting of 15 items as per annexure enclosed [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
supply of holder for traction motor suspension of wap7 loco (tm type 6fra6068) as per clw drg . no. 1209-01.118-002 alt- 3. [ warranty period: 30 months after the date of delivery ] ] dy.cmm/lsd/per, sr
supply of grill arrangement to lavatory door to drg. no. icf/std-5-6-015, col-i, alt-h. [ wa rranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of member complete as per drg no. 2.10113.0.03.100.010 ( under slung water tank suspensio n bracket ) [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of aluminium foundation of sj (inductive shunt) complete type nr59a1 in two pieces as pe r clw drg no 2.twd.133.021 alt-3 or latest [ warranty period: 30 months after the date of delivery ] ]
supply of set of spares for m/s kbil make computer control brake system (improved version) of three phas eelectric locomotives. each set consisting of 09 items: (i) distributor valve, m/s kbil part no. ii73835, qty.- 01se t (ii)control portion, er, m/s kbil part no. 787776-1994, qty.- 01set (iii) control portion, 20-pipe, m/s kbil part n o.787775-1994, qty.- 01set (iv) control portion, 16-pipe, m/s kbil part no. 787556-1994, qty.- 01set. (v) control portion, bc, m/s kbil part no. 787802, qty.- 01set (vi) control portion, bp, m/s kbil part no. 787321-1994, qty.-0 1set (vii) controller assy. ebv-a, m/s kbil part no. 787605-1994, qty.- 01set (viii) controller assy. ebv-b, m/s kbi lpart no. 787606-1994, qty.- 01set (ix) control portion relay, rcp, m/s kbil part no. 786879-1994, qty.- 01set a s per annexure attached. [ warranty period: 30 months after the date of delivery ] ]
supply of improved sej (assembly) : improved sej for lwr with (65 mm max.gap) b.g. 60 kg with complete fit tings excluding rubber pads. (drawing and item details as mentioned in set documents are applicable) drg: (rds o) rdso/t-6922, alt.05 spec: (rdso) irs/t-10-2025, (rdso) provisional 2008 drg. no. rdso/t-6922 to 6934. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 la cs ] ]
supply of set of items for bmbs wagons consist of (i) hose assembly 1inch with flange to kbi part no.i.4.2036 -2 nos( ii) o-ring for 1inch hose assembly to kbi part no a27763/17ki -2 nos.specn rdso' s spec. no.wd-23-bmbs-2008 (rev.-1) with amnd.no.1 of sept. 2016 [ warranty period: 36 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
supply of supply of forged crane hook of 3.2-ton capacity along with lock nut conforming to diesel loco shed/goc drawing no. goc/ds/d/4-337/0. the hook shall be manufactured from forged steel and shall conform to is 3815:1969 or the latest revisi on. the hook shall be provided with a suitable safety latch. it shall be tested in accordance with the relevant bis standard at a g overnment-approved/nabl-accredited test laboratory, and the test certificate shall be supplied along with the material. the ma nufacturer shall also provide a guarantee/warranty certificate along with the supply. [ warranty period: 30 months after the d ate of delivery ] ]
supply of lavatory door complete rh as per drg. no. lh56122 alt d, packing instruction - pi042 ver-1.0. [ warranty pe riod: 30 months after the date of delivery ] ]
supply of distributor valve assembly with relay valve, suitable for two stage single piece lsd with common pipe bracket assembly with control reservoir, intermediate piece with isolating cock assembly and main gasket as per rdso specn no 02-abr-02 of oct 03 with 4 amendments (last amendment no 4 of sep 16) or latest for blcs wagons. [ warranty period: 36 months after the date of delivery ] ]
supply of lock plate a, b and holding plate in set for lock unit of grs apparatus case. one set co mprising of the following:- 1 lock plate - a to drg.no. cwm 03705 alt-2 : 1 no. 2) lock plate - b to drg. no. cwm 03805 alt-3 : 1 no. 3) holding plate to drg.no. cwm 03605 alt-5 : 2 nos. each item to be pac ked separately. sample shall be approved before bulk supply. [ warranty period: 30 months after th e date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
supply of cross ridge stay as per rdso drg. no. wd-91071-s-58 alt-5, item no. 4 [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of filling pipe for btpn tank wagon to rdso drg. no. wd-86081-s-61, alt-16 or lates t, item no. 12 & 14 with item no. 20 to 30 in assembled condition. material is:1239-2004 & as pe r drg amendment no. 4 of june 2010 (part-i) gr. heavy [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of wheel iron skids , specification for wheel skid for use of indian railway bg stock as per rdso drawing no. t fc/spec/374/skid dated 26.09.2013 or latest. the manufacturer shall supply the certificate of test and examination carrie d out by govt. owned lab or nabl approved lab. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of set of 03 gauges along with probe and cable suitable for demu dpc 1400 hp with cummins kta 50l fitted in pan el instrument cil part no. 4055254 (gauge lube oil temperature: 3414455, gauge water temperature : 3414454, gauge lube oil pressure: 500109). make : cummins/vdo/pricol. note: the firm has to issue valid calibration certificate along with supply. [ w arranty period: 30 months after the date of delivery ] ]
supply of tecspak pad for side bearer of modified blc wagons (blcam/blcbm) as per drg. no. 4070 4 (ms-25), rev. b.5, conforming to rdso specification no. contr-01-misc-2007, rev-1 of september 201 0, with amendment no. 1 of january 2022 [ warranty period: 60 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] cws/jtj, sr
supply of glued insulated rail joints for bg uic 60/60e1 g3(l) drg:(rdso) rdso-t-2572 alt-5 spec: (r dso) manual for girj-2024. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 la cs ] ]
supply of solid joint-32mm with extended length for 220mm ground connection to drg.no. cwm 05922 alt-4 i n set. one set consists of :- 1) lock rod short 1480 mm : 1 no. 2) detector rod short 1480mm : 1 no. 3) lock rod long 2320mm : 1 no. 4) detector rod long 2320mm : 1 no. note: each rod shall be supplied duly assembled with spl. hex head stepped bolt, hex nut and split pin as shown in the drawing. for ease of identification during receipt and inspection, rods of the same type and length shall be bundled together separately and securely fastened. eac h bundle shall be properly tagged/labelled indicating description of the item, length and quantity. as per drg.no. c wm 05922 alt-4 [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 la cs ] ]
supply of set of spares for kbi make bch unit consisting of , ( 1 ) equalizing discharge valve ( only equa lizing discharge valve ) , kbi part no : j72220/1 - 01 no/set , ( 2 ) isolating valve switch ( ivs assemblies ) , k bi part no : ii96097 - 01 no/set . [ warranty period: 30 months after the date of delivery ] ]
supply of cross member complete for lhb double decker ac coaches as per drg no. ld11250 alt [ w arranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] sr section engineer,cb,carriage
supply of reclining adjusting lever assembly lh (50%) and rh (50%) (for ac chair car coaches) to drg no j&td.cw.per.sr drg no sk-1100,successful bidder to get 2 nos. advance sample approved from the con signee officer before effecting bulk supply. supplier to ensure that the sample is received within 15 days from place ment of po. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 la cs ] ]
supply of hvn-66 insulating liner for use with wider psc sleeper to drawing no.rdso/t-8746 suit able for 60kg (uic)/ 60e1 &52 kg rails (applicable for drawing no. rt-8751) drg: (rdso) rt 8751-53 sp ec: (rdso) irs specification t-44, 2025, third revision. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 la cs ] ]
supply of fishplates for 60 kg. uic rail (1meter long ) drg: (rdso) rdso-t-5916 spec: (rdso) irs: t- 1-2021 [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 la cs ] ]
supply of high tensile tight lock centre buffer coupler with aar `h' type head, balanced draft gear and other associated components for fitment on bg passenger coaches.to rdso spec.no. rds o/2011/cg-03, rev.3 with amd. slip no. 1 of july 2024. [ warranty period: 84 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] dy.cmm/lsd/per, sr
supply of sub kit poh - 2b (uncommon items) of m/s river engineering private limited for bt typ e tap changer consisting of 73 items (50 items as per annexure - s3 and 23 hardware items as per an nexure poh-hw-3) to rdso technical circular no. rdso/2010/el/tc/0102 rev. '2' dated 06.08.2021 [ warranty period: 30 months after the date of delivery ] ]
supply of overhauling kit for lru, control portion 16-pipe (787556-1994) of electric ccb system t o m/s. knorr bremse kit no. xki/kit/01576 consisting of 68 items as per annexure [ warranty period: 30 months after the date of delivery ] ]
supply of overhauling kit for driver's backup valve (ptdc) of m/s. kbi part no. 787609 and kit no. xki/kit/02518 consisting of 27 items for m/s. knorr-bremse make electric ccb system for wap-7/wag- 9 locomotives. [ warranty period: 30 months after the date of delivery ] ]
supply of composite grooved rubber sole plate(cgrsp) - 10mm thickness for use with wider psc sleeper to drawing no. rdso/t-8746 suitable to rails 60 kg(uic) / 60e1 & 52 kg drg: (rdso) rdso/t-874 7 alt-1 spec: (rdso) t- 55-2025 revision-01 [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 la cs ] ]
supply of water drain assembly to drg. no. cwm/sk/0200 alt-2 for electric point mach ine [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]
supply of retro-fitment type usb type a & c (usb 3.0 compliant) 45w as per rcf specific ation edts 455, rev-nil amnd.1, corr.1 or latest, the fitment as per drg. sked-959 alt b,module with snap in type fitting (type ii). suitable for fitment in sks model no. cla 206or equivalent. make: oswin,sks,ssk,havells or similar. warranty 30 months [ warranty period: 30 months after the date of d elivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of head stock complete for icf coaches to drg no.wfac4-1-2-401, col.ll, alt.m/0 . [ warranty period: 30 months after the date of delivery ] ]
supply of lock retraction pin and chain and foundation plate for cbc transition coupling as per drg no sk-6 2724 item no 14 and 15 alt-28 or latest.note : one sample to be got approved before effecting bulk supply [ warran ty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of equalising stay complete, item 1 to 7 as per icf drg. no. emu/m-0-5-048. col.1 alt. f/nil. for conventional motor coaches. [ warranty period: 30 months after the date of del ivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] amm/tsd/avd, sr - equalising stay complete, item 1 to 7 as per icf drg
supply of lube oil line assembly to blw part no. 16040168 and emd part no.16040168/ drg.no.8039842 for the maintenan ce of hhp diesel locomotives. [ warranty period: 30 months after the date of delivery ] ] - procurement of lube oil line assembly,
supply of overhauling kit for turbo oil filter manifold consisting of two items as per details given below. (1) seal o ring to e md pt.no.8366436 and dlw pt.no.16170751 - qty. 01 no. (2) seal o ring to emd pt.no.8280352 and dlw pt.no.16170763 - qty. 01 no. (sl.no. 1 + 2 = 01 set) for the maintenance of hhp diesel locomotives. [ warranty period: 30 months after the date of delivery ] ] - procurement of overhauling kit
supply of straight pg metal thread end fitting, thread size pg48 fits to conduit size nw 48, with hexag onal nut made of nickel plated brass, with suitable o ring and washer as per annexure - a, table a-2, sl. no .8. conforming to rdso specification no. rdso/pe/spec/ac/0138/2009 (rev.1). [ warranty period: 30 m onths after the date of delivery ] ] - straight pg metal thread end fitting, t
supply of footstep arrangement for slrd coaches to icf drg.no. icf/std-2-4-001, col iii ite m no. 1, 5 & 6 alt q/ nil [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] - footstep arrangement for slrd coaches
supply of switch plate assembly complete with polycarbonate cover frame and powder coated steel pl ate with 1 no. 16 a, 250 v on / off switch and 1 no. 6 / 16 a, 250 v ac 6 pin socket with isi marked as per is: 3854 and is: 1293, suitable for lhb type hot buffet cars as per rcf specification edml -043, rev a, corr igendum - 2 and item no 3 of drawing no. lh74205 alt. b. oem or authorized dealer only to offer with docu mentary evidence. valid approval/prototype approval from rcf/icf/mcf/rdso/rb for the item to be submit ted during offer and supply. [ warranty period: 30 months after the date of delivery ] ] sse/ac/mas, sr - switch plate assembly complete with polycarbonate cover frame and powder coated steel plate
supply of common pipe bracket with control reservoir complete. drawing no.- rdso,s drg. no. wd9-7951-s-10, alt.-3. material and specification - conforming to rdso,s spec. no. 02- abr - 02 with amend no. 4 of sept. 2016 and appendix-a1. [ warranty period: 36 months after the date of deliver y ] ] - common pipe bracket with control reservoir complete.
supply of 25mm dia al. alloy coupler to is:1285-(latest) with desgn. 63400 condition t6 (ne w) of table 2 threads as per table-1 of is- 14763 (latest), with is-14768 part-1 clause 6.3.3 (me dium mechanical stresses), clause 6 table 1 s.no. (vi) for temperature classification, clause 6.8.1.4 (protection against dust) and clause 6.9.3 (with declared tensile strength for 10 kg load) and dimensions to is:14768 part-2 (latest). the length of the coupler shall be as per is :14768 part-2 latest fig.102 marked x that is 25 mm long [ warranty period: 30 months after the date of delivery ] ] - 25mm dia al. alloy coupler
supply of ss longitudinal hand holds for three phase emu first class extended portion c oaches to drg. no.icf/std-6-4-069, col - i, alt-c. sample to be approved from - ss longitudinal hand holds
supply of improved sej (assembly) : improved sej for lwr with (65 mm max.gap) b.g. 60 kg with complete fit tings excluding rubber pads. (drawing and item details as mentioned in set documents are applicable) drg: (rds o) rdso/t-6922, alt.05 spec: (rdso) irs/t-10-2025, (rdso) provisional 2008 drg. no. rdso/t-6922 to 6934. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 la cs ] ] - manufacture and supply of improved sej for lwr with (65 mm max. gap) b.g. 60 kg with complete fittings excluding rubber pads, rdso/t-6922.
LOADING...
LOADING...