Find the latest tool kits tenders in southern railway for 2026 from government departments, corporations and state PSUs. Get tender details and bidding information.
FILTERS
corrigendum : supply of special tool as per drg .no. m/els/rpm/sk-345 for removing and providing inlet & outlet disk valve of lp cylinder in rr20100 elgi compressor . [ warranty period: 30 months after the date of deliver y ] ]
View Insights
supply of huck bolting (lock bolt) machine with power pack and tool size 1/2 inch, 3/4 inch, 5/8 inch, 7/8 inch, 1 inch , 1-3/8 inch as per specification enclosed. [ warranty period: 24 months after the date of delivery ] ]
supply of set of tools for locomotive tool box consisting of 09 items as per annexure attached .make: taparia/ venus hand t ools/ de-neers /inder or similar . note: firm should submit authorised dealership certificate along with tender otherwise offer will not be considered. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
supply of signal maintainer's tool bag with tools containing (1) hand held 100 khz true rms digital multimeter dc voltage range 600vdc with 10mv resol ution, ac voltage range 600 vac with 10mv resolution bandwidth 100khz, dc current range - 10a with 1ma resolution, ac current range-10a with 1ma resolu tion. acceptable makes:rishab 18s,fluke-179, metravi metrasafe-20,rishab-6016 (2)hand held true rms digital clamp meter ,jaw dia 17 mm dc voltage rang e 600vdc with 10mv resolution, ac voltage range 600 vac with 10mv resolution, dc current range - 100a with 1ma resolution, ac current range-100a with 1 ma resolution. acceptable makes:metravi-4673,fluke 317,stanlay scm222, fluke-319 (3)double ended spanner ,8piece set size 8 to 22.acceptable makes :ta peria,stanley,bosh,black and decker (4)screw driver set multipurpose 8 piece.acceptable makes:taperia,stanley,bosh,black and decker (5)long nose plier si ze 8/200mm with rubber insulation. acceptable makes:taperia,stanley,bosh,black and decker (6)combination plier with rubber insulation. acceptable makes: taperia,stanley,bosh,black and decker (7)wire stripper with rubber insulation. acceptable makes:taperia,stanley,bosh,black and decker (8)cable stripping k nife 200mm length ,3mm thick blade. acceptable makes:taperia,stanley,bosh,black and decker (9)adjustable spanner size 12"chrome vanadium with rubber insulation. acceptable makes:taperia,stanley,bosh,black and decker (10)t55 double face sledge hammer with wooden handle. acceptable makes:taperia,st anley,bosh,black and decker (11)mini hacksaw 254mm with blade set (12)tubular box end spanner set 8 piece of size 6x7,8x9,10x11,12x13, 14x15,16x17, 1 8x19,20x22.acceptable makes:taperia,stanley,bosh,black and decker (13)flat carbon steel chisel. acceptable makes:taperia,stanley,bosh,black and decker (14)alloy steel centre punch. acceptable makes:taperia,stanley,bosh,black and decker (15)rechargeable pen torch (16)back pack type tool bag with separat ed tool compartments detachable divider with pockets for tools and rain cover. [ warranty period: 30 months after the date of delivery ] ] - signal maintainer's tool bag with tools containing (1) hand held 100 khz.
supply of set of tools for maintenance of compressor and compressor air pipe line as per annexure a. [ warranty period: 6 months after the date of delivery ] ] - set of tools for maintenance of compres
supply of tool for installation/removal for traction rod bushing (item-1=06 nos, item-04=02 nos, item-5=01 no, item-8=08 nos) as per drg. no. emd/u bl/ut/0313-2.. [ warranty period: 30 months after the date of delivery ] ] - tool for installation/removal for traction rod bushing
corrigendum : supply of bimetal band saw blade of size 3760 x 27 x 0.90 mm 4/6 tpi flex (m-51 platinum) confirms to is 5030. make:- bipico/itl/mirinda or equivalent. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] senior section engineer
supply of blower complete with motor (mvsi) for cooling rectifier block as per clw spec clw/es/ b-14 alt c and to rdso spec e-10/3/08 revised september 95 with ammendment no 1 & 2 [ warrant y period: 30 months after the date of delivery ] ] amm/lssd/ed, sr
supply of heavy duty hydraulic pipe bending machine with special type dice size- 1/2", 3/4", 1", 1.25", 1.5" and 2" with stand, make- itc commando or voltze or hytack or similar. [ warranty period: 30 mont hs after the date of delivery ] ]
corrigendum : supply of corded small angle grinders, power 220-240v ac, 50/60 hz, 8500 rpm, suitable wheel diam eter 180 x6,6 x 22,23mm, 2200-2400 watt. make: makita/ingersoll/bosch./dewalt/hitachi only. firm shall qu ote any one make for the tendered description along with valid authorization, ]
supply of sledge hammer with handle (3.6kg) [ warranty period: 30 months after the date of deliv ery ] ]
supply of cobalt twist diameter 4.2mm drill bit m42 for stainless steel and hard metal as per specification is: 5101-1999, make: hittco (or) miranda (or) addison [ warranty period: 12 months after the date of delivery ] ]
supply of duct tcc blower - 6 inch i.d. 207.5 inch long to dlw drg no. 10635183 alt. ad and to dl w part no. 17271228 for wdp4/wdg4 locos. [ warranty period: 30 months after the date of delivery ] ]
supply of 6mm stainless steel drill bit of make: addision/taparia/miranda [ warranty period: 12 months after the date of deliv ery ] ]
supply of double inlet centrifugal blower complete with fan motor 415v +/-10%, 3 phase, sweep - 133mm, 1500 rpm, minimum air volume - 625 cu.m / hr, input power (max) - 200w, nominal current 0. 4 a, conforming to rcf specification no. edts 331 rev a corrigendum 1 to 3 (type - i) make acceptabl e:arihant, eyyani, integ, superior, kaamney oem or authorized dealer only to quote with documen tary evidence. [ warranty period: 30 months after the date of delivery ] ] - double inlet centrifugal blower complete
supply of drill twist parallel shank jobber's 3.7mm dia material hss is:5101/91 (ra 2018) [ warr anty period: 30 months after the date of delivery ] ] dy.cmm/lsd/per, sr - drill twist parallel shank jobber's 3.7mm dia material hss is:5101/91 (ra 2018)
supply of heavy duty grease pump with grease gun having in line flow meter as per specification (1) gr ease gun hand operated, (2) grease drum capacity 15 kg., (3) wheel for easy moving, (4) digital oval gear t ype meter, (5) grease flow 0.1 kg. to 2.5 kg. /min., (6) maximum working pressure 7500 psi, (7) grease disc harges up to 9 gm/stroke, (8) wire braided grease delivery hose (length minimum 2.0 meter) having swivel c onnector assembly at both ends. (9) accuracy plus minus 3 percent, (10) unit of measurement-kg/gm/lbs, (1 1) battery 2 nos. of 1.5 v. make/brand: skf / groz / elgi/ ingersoll rand only. [ warranty period: 30 months after the date of delivery ] ] - heavy duty grease pump with grease gun
supply of files bastard half round 400 mm is.1931-2000, (ra-2021) with amd. 1 of jan. 201 2 table-iii [ warranty period: 30 months after the date of delivery ] ] - files bastard half round 400 mm is.1931-2000, (ra-2021) with amd. 1 of jan. 2012 table-iii
supply of torque wrench with the range 10-50 nm, manufactured by chrome molybdenum alloy steel square drive, 48 teeth ratchet for an engagement angle 7-1/2 degree, fully secured locking mechanism, with calibration certificate from na bl or oem or any govt. approved labs. [ warranty period: 12 months after the date of delivery ] ] - torque wrench with the range 10-50 nm, m [torque wrench with the range 10-50 nm, manufactured by chrome molybdenum alloy steel square drive, 48 teeth ratchet for an engagement angle 7-1/2 degree, fully secured locking mechanism, with calibration certificate from nabl or oem or any govt. approved labs. ]
supply of set of tools consisting of following items allen key socket, 1) 6 mm (1/2 sq. drive) - 10 nos , 2) 10 mm (1/2 sq. drive) - 10 nos, ,make: stanley /taparia / equivalent [ warranty period: 12 months afte r the date of delivery ] ] - set of tools consisting of following items allen key socket & set of tools consisting of following items double end spanners
supply of wooden wedges for ac locomotives to drg no. trs/acl/p-212 [ warranty period: 12 months after the date of deli very ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] - wooden wedges for ac locomotives to drg no. trs/acl/p-212.
LOADING...
