Find the latest bolt tenders in western railway for 2026 from government departments, corporations and state PSUs. Get tender details and bidding information.
FILTERS
replcement of existing bearing on major bridges, painting work of existing steel girder bridges and robs, changing of existing rivet, supply of hfsg bolts, epoxy grouting work and other misc.work in over ju & bkn division.
View Insights
corrigendum : manufacturing and supply of 6400 mm over riding derailing switches 1 in 8.5, bg, 60 kg. (uic) on psc sleeper as per rdso drawing no. t-6068 (alt-4) complete, but excluding grsp, insu lating liners, ercs, fish plates and fish bolts & nuts, and ir specification: t 10-2025. note-1: this in cludes cost of all the rails required for manufacturing of this item.note-2:the bifurcation of rh and lh quantity will be advised in coverage purchase order. [ warranty period: 30 months after the date o f delivery ] [ rate of supply 24 units per month , commencement time allowed -1 month ] anywhere in nwr as per tender 217.00 set
supply of set of items for bolt for brake block consisting of 1) bolt to icf. drg no. emu/m -3-1-009 alt.b. 2) spring to icf drg.no emu/m-3-1-006 alt c/3. 3) castle nut m 12 to is: 2232/67 ta b-2p-6. 4) spring washer galvanised m 12 to is: 3063/94 tab 1a, type -b and material to is: 4072/ 1975 gr.3. .5) split pin dia 3.2 x 40 galvanised to is: 549/74 tab-1. [ warranty period: 30 months aft er the date of delivery ] ]
corrigendum : supply of side frame key square headed bolt m 20 x 80 and hexagonal nut, spring washer and dia 4 mm split pin to rdso drg. no. sk 69594 alt-38 , material specification as per drawing [ warranty pe riod: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] dsd-sbc, swr
supply of bolt ms hex head size m30*110mm long with one square nut and one spring wa sher as per drg. no. cee/cr/emu/mtn/2aa/3/027/r2 [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] division stores depot
supply of hex head bolt m16x130 high tensile as per is:1364 ( pt.-1 )/2023, ce-with property class-10 .9 to is:1367 ( pt.-3 )/2017, rev-5,coating as per mdts-057. [ warranty period: 30 months after the dat e of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] carriage stores depot ajmer,
supply of indicating bolt (lh + rh) for lavatory door of lhb coaches as per rcf drg. no. cc56437 alt. "a" for lh and rcf drg. no. cc56438 alt. "a" for rh (qty.= 50% lh & 50% rh). [ warranty period: 30 months after the date of delivery ] ]
supply of m.s. black hexagon head bolt with threaded m16, nominal length 75 mm. and property class 4.8, confirming to is: 1363 (part-1):2023 iso- 4016:2022 with hexagon nut with threaded m16 and property class 5, confirming to is:1363(part-3):2018/iso-4034-2012. [ warranty period: 30 months after the date of delivery ] ] dy cmm - dahod, wr
supply of set of bolts for torque support (tm). 1) hex. head bolt m24x100/54x3 p zn. plated (passiva ted) is:1364-s-8.8 gr. a to is:1367 qty-01 nos/set. 2) hex. head bolt m24x110/54x3p zn. plated (passiva ted) is:1364-s-8.8 gr. a to is:1367 qty-01 nos/set. uvam item ref. : 2100143--standard hardware (ms) , su b item : 2100143001. [ warranty period: 30 months after the date of delivery ] ]
supply of manufacturing and supply of joggled fish plates with 'c' clamps for bg 60kg (uic) as per rdso drawing no. t- 4016 complete set with all fittings as joggled fish plates to rdso drawing no. t 4016 - 2 nos, clamps to rdso drawing no. t- 4017 -4 nos, clamps to rdso dr8 no. t - 4017/1 - 4 nos, bolts, nuts (25 x 290 mm) to drawing no. t-11524- 4 nos and single coil spring washer to rdso draw ing no. t-10773 = 4 nos. specification no.irs:t-1-2021 (first revision) and with latest corrigendum if any as on date of closing of e -tender. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] [ rate of supply 1120 units per month , commencement time allowed -1 day ]
supply of full threaded g.i. hexagonal head bolt with nut m6x30 mm with one plain washer & one spri ng washer as per is:1363 (part-2) 2002 & is:1363 (part3) grade 10.9. note: the firm should supply in asse mbled condition. [ warranty period: 30 months after the date of delivery ] ]
supply of non standard hardware kit for hitachi traction motor type hs 15250a. kit consisting 5 items 12 nos as follows (i) special bolt to d rg. no.10t.835-015 alt.g =04 nos(ii) special bolt to drg. no.10t.834-941 alt.d =01 no. (iii) lock washer (ce) to drg. no. 4twd.095.253= 01 no . (iv) double locking plate to drg. no. 4twd.095.093= 02 nos(v) self tapping screw dia 2.5mm or self tapping screw type u no.2, l=6.5mm to din:7974, round headed.=04 nos (manufacturers identification mark shall be provided in each item as per drg./specn. non standard hardware shall be tested at nabl certified lab as per relevant drg. /specn and supplies will be accepted with manufacturers gurantee/test certificate). [ warranty period: 30 months after the date of delivery ] ]
supply of supply of indicating bolt (lh + rh) for lavatory door of lhb coaches as per rcf drawing no. cc56437 alt. "a" for lh and rcf drawing no. cc56438 alt. "a" for rh (qty.= 50% lh & 50% rh) mat erial & specification as per drawing. [ warranty period: 30 months after the date of delivery ] ] sse/c&w/bgm, swr
supply of hex head bolt size m2o x 110mm, is 1364 (part-i) 2002 property class 8.8 =16 nos. w ith hex nylock nut size m20 is 7002 (2005), property class 8= 16 nos. make - tvs/unbrako/ lps. nabl test certification must with supply. [ warranty period: 30 months after the date of delivery ] ]
supply of titanium antegrade femoral nail11- 12mm x 36-40cms, with bolts -2 and hips screw-2 r unning size ]
supply of set of hex head full thread bolt m10 x 50 mm with 02 nos. spring washer & 02 nos. flat wa shers with 02 nos. hex nut for leveling valve safety plate & earthing cable fitment as per spec. ss 304 - di n 439 for bolts & nut; and is 1363 for washers. sample to be approved before bulk supply. [ warranty per iod: 30 months after the date of delivery ] ] sr.section engineer/poh/mx,
supply of lock bolt ( 22.2 mm ) dia with coller and zink plated grip range min 44.45 mm to max 50.80 mm , grip no.28. confirming to rdso spec. no. is/rdso-wd/0001:2022 [ warranty period: 30 months a fter the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] loco store depot bikaner,
supply of high tensile hex bolt for suspension bearing cap size m 24 x 150 mm long with locking hole size 2.5 mm dia in head tensile grade 8.8 to is: 1367 [ warranty period: 30 month s after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] diesel stores depot ajmer,
supply of special bolt with 2 collars complete in assembled condition as per rdso drg. no. sketch-652 45 alt-2/d, item no. 1,2 & 7 [ warranty period: 30 months after the date of delivery ] ] senior section engineer
supply of high tensile bolt size m20 x 80-8.8 with spring washer, m20 castle nut and split pin to rds o drg no wd -12008 - s-1 alt 3 (item no 5,6,7 and 8). [ warranty period: 30 months after the date of d elivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] loco store depot bikaner,
LOADING...
