Find the latest damper tenders in western railway for 2026 from government departments, corporations and state PSUs. Get tender details and bidding information.
FILTERS
supply of manufacturing and supply of 1 in 12 cms crossing b.g. (1673 mm) for 60e1 rail on psc sleepers to rdso drg. no. t-4220 with latest alteration (alt-9) as per irs specification irs: t-29 (revis ed-2024) complete with all fittings as listed in annexure-a excluding. fish plates, ercs, insulating liner s and check rails. (the alteration in drawing and specification issued by rdso one month prior to tend er closing date shall be applicable.) [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] [ rate of supply 6 units per month , commencement time allowed -1 day ]
View Insights
supply of pedestal jaw liner for casnub bogie, size = 67 mm x 38 mm x 3 mm thick as per rdso maintenance manual g-95 (rev.ii of june-2026) read wi th all amendments, figure no.31, material to is: 3885-1992 part-i with amendment 1 and 2, grade- iv, hardness: 380-420 bhn. other technical requirements conforming to rdso specification no. wd-21- casnub-22nlb bogie-93, rev. 2 june-2026, read with all amendments, latest amendment of june 2026. (uvam item ref. item id:- 3100432) [ warranty period: 30 months after the date of delivery ] ] senior section enngineer (c&w) sabarmati
supply of bolster liner size 153 mm x 120 mm x 8 mm thick to rdso drg. no. wd- 85079-s-3, alt-7, item-2, material to is: 3885-1992 part-i with amend ment 1 and 2, grade-iv, 380-420 bhn & other technical requirements conforming to rdso str no. wd- 21-casnub-22nlb bogie-93, rev. 2 july- 2002, read with all amendments, latest amendment no.-6 of july 2020. (uvam item ref.item id:- 3100432) [ warranty period: 30 months after the date of delivery ] ] senior section enngineer (c&w) sabarmati
supply of liners of size 100 x 90 x 5 mm thick as per drawing no- contr -9404-s/3 alt.8 as per specification is:3885pt.i gr.iv (bhn 380-420) (uvam id 3 100432). [ warranty period: 30 months after the date of delivery ] ] senior section enngineer (c&w) sabarmati
supply of liner 50 x 10 x 3 mm for bolster rotation stop lug. drawing no. fig.40, para 5.4.2 of g-95 (rev.1) with amendment no.5. mat. & spec. [1] wd - 21 - casnub - 22 nlb - bogie - 93, rev. 2 with amend. no. 5. [2] is : 3885, part-1, gr.-iv, hardness 380 - 420 bhn [ warranty period: 30 months after the date of delivery ] ]
supply of set of liner and with csk screw as per rdso spec. no. wd-23-bmbs-2008 (rev.1) amndt. no. 1 of sept.2016. (one set consists two items 1. li ner confirming to escorts drawing no. 4eb7354 or equivalent 01 no 2. csk screw confirming to escorts drawing no. 4eb7376 or equivalent 2 no?s). suitable f or (escort design). [ warranty period: 30 months after the date of delivery ] ] senior section enngineer (c&w) sabarmati
supply of outside column liner size 240 x 25 x 5 mm as per rdso manual g-95. matl. & spec. as per is:3885 (part 1)/1992 gr.-iv, amndt. no.2. [ warra nty period: 30 months after the date of delivery ] ] senior section enngineer (c&w) sabarmati
supply of liner for land surface size 105 x 24 x 3 mm as per rdso manual g-95 fig-40. matl.&spec.as per is:3885 (part 1)/1992 gr.-iv, amndt. no.2. [ w arranty period: 30 months after the date of delivery ] ] senior section enngineer (c&w) sabarmati
supply of traction transformer complete with cooling system & accessories like h.t cable along with pr otection shield in passenger compartment & under frame area, thermostat etc. related protection equipme nt & with safety chain arrangement including termination crimping lugs, cable markers with heat shrinkabl e sleeves for power & control cables, equipment mounting & earthing hardware & accessories or equivalent . make - bhel, drawing no - 24661950068, 1276 kva. as per specification. [ warranty period: 30 months after the date of delivery ] ] senior section engineer
supply of liners of size100 x 90 x 3mm thick as per drawing no- wx-26003 & as per material specification is:3885pt.i gr.iv (bhn 380-420) (uvam id 310 0432) [ warranty period: 30 months after the date of delivery ] ] senior section enngineer (c&w) sabarmati
supply of set of liner for centre pivot of wap1/wap4 locos comprising of 02 items 04 nos as under: 1) s ide liner of centre pivot to clw drg no 03/4/31/51 alt.7 qty- 02 nos. 2) bottom liner of centre pivot to clw drg no 03/4/31/52 alt.1 qty 02 nos. [ warranty period: 30 months after the date of delivery ] ]
supply of top side bearer liner as per drawing no. wd-20024-s/2, alt-1 (item no. 11) & as per specifi cation no. is:3885 part-1, gr-4 amnd. 2:2024. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] sr. section engineer wagon
supply of flexible flame-retardant, high performance, polyolefin heat-shrinkable tubing sleeve suitable for 1.5sqmm yellow colour conforming to & mak e shall be cat. no. rnf-100, type-1, of m/s tyco electronics or equivalent of m/s panduit or mv electro-systems or m/s phoenix or m/s novo-flex make only rest ricted as per edml-176 rev a & complying rcf ed/cai/032 dtd 20.03.2024 [ warranty period: 30 months after the date of delivery ] ]
supply of pvc sleeve cover for side upper berth holder, sleeve pvc (commercial quality) for cn coaches specification: size id 40 mm & od 43 mm(+-1 mm), colour shade of material shall be as per rdso pvc sample code no. alnac-03. [ warranty period: 30 months after the date of delivery ] ] senior section engineer carpenter shop
supply of transmission parts of 8 wheeler tower wagon no.dhtc/35. parts low & intermediate clutch assy: 1. hub (part no.6756023) 1 no. 2. ring snap ( part no.23011150) 1 no. 3. hub assy (part no. 683271 7) 1 no 4. drum low range (part no. 6838478) 1 no 5. ring ext ( part no. 6756041 ) 1 no 6. piston low ra nge( part no.6832620 ) 1 no 7. spring( part no. 6756042 ) 1 no 8. shaft t/m main ( part no.6768739 ) 1 no 9. bearing ( part no. 23047964) 1 no 10. gear low clutch ( part no.6769397 ) 1 no 11. gear high ( part n o.23012927 ) 1 no 12. bolt ( part no.179833 ) 4 nos 13. strip locking ( part no. 6754893) 2 nos 14. carrier assy ( part no. 6836010) 1 no 15. washer thrust ( part no. 23015601) 1 no 16. piston inter ( part no.6832 617 ) 1 no 17. cyl piston ( part no.6755952 ) 1 no 18. gear high range ( part no. 2304530) 1 no 19. carri er assy ( part no.6768836 ) 1 no [ warranty period: 30 months after the date of delivery ] ] deputy chief electical engr (c-i) - transmission parts of 8 wheeler tower wagon.
supply of piston assembly/ram for 7/8 inch installation tool suitable for model no. ohpl-i -2228 of orione make along with seal kit and rod seal for piston and collet adopter or simi lar [ warranty period: 6 months after the date of delivery ] ] sr. section engineer mill - piston assembly/ram for
supply of filling pipe cap assembly for bptn tank wagon to rdso drg. no. wd-86081-s-61, alt-16, ite m no. 20 to 30 [ warranty period: 30 months after the date of delivery ] ] sr.section engineer wagon - filling pipe cap assembly for bptn tank wagon to rdso drg. no. wd-86081-s-61
supply of "vertical wear liner for centre pivot bottom to rdso drg. no. wd-97049-s-3, alt.-12, it em-4 and other technical requirements conforming to rdso specification no.wd-17-casnub-22-hs bo gie -1992, rev.4 of september 2024." [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] dy cmm - dahod, wr - vertical wear liner
supply of top side bearer liner to rdso drg. no. wd-85079-s-1, alt.-16,item-12,. spec. as per drg an d material as per is:3885 pt-1 gr.4 (hardness 380-420 bhn). silico-manganese liners shall be marked for manufacturer initial and month and the year of manufactured by metal laser engraving in 6 mm size and 0.1 mm depth minimum. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] wagon stores depopt ajmer, - top side bearer liner.
supply of "a set of si-mn liners for nlb/hs casnub bogie. conforming to material specification to i s:3885-1992 pt-1 with amendment 1 and 2, gr-iv, hardness: 380-420 bhn with proper marking on ea ch liners one set consists of- (1) side frame antirotating lug liner size-23x244x3 mm , qty = 02 nos. ( 2) side frame column liner (inner) size :10mm x 240mm x 3mm, qty=01 nos. (3) side frame column li ner (outer) size :25mm x 240mm x 3mm, qty=01 no. (4) pedestal crown roof liner 125x145x3 mm, qt y=01 no. (5) pedestal jaw long liner 17x75x5 mm, qty=08 nos. (6) brake beam end piece liner 115x4 5x3 mm, qty = 01 nos." [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] dycmm (gs) sbi, wr - a set of si-mn liners for nlb/hs casnub
LOADING...
