Find the latest gauge tenders in western railway for 2026 from government departments, corporations and state PSUs. Get tender details and bidding information.
FILTERS
supply of lcd ultrasonic thickness gauge with a measurement range of 0.75 mm to 300 mm. specific ation: digital lcd display with a minimum resolution of 0.1 mm. operating frequency: 5 mhz. measuring ra nge: 0.75 to 500 mm (for steel). accuracy: ?(1% h + 0.1) mm, where h denotes the measured thickness. so und velocity range: 1000?9999 m/s. the instrument should be provided with a rechargeable power supply along with standard accessories such as a charger, transducer, coupling agent, and a 4 mm sample block f or calibration. accepted makes: modsonic, stanley, mitutoyo, olympus, ndt kits, extech, cygnus or similar. [ warranty period: 30 months after the date of delivery ] ] senior section engineer - lcd ultrasonic thickness gauge
View Insights
supply of comb model external thread profile checking no-go gauge for screw -rh size 5 5.635 x 6.35mm width -40 mm, thread length - 170mm & total length 260 mm material stainless steel thickness -3 mm & supply with calibration certificate [ warranty period: 30 months after t he date of delivery ] ] senior section engineer - comb model external thread
supply of digital wheel diameter gauge as per attached specification. [ warranty period: 30 months after the date of delivery ] ] - digital wheel diameter gauge as per attached specification.
supply of digital buffer height gauge, model bhg-3 (cbc) the gauge consists of a foldabl e track base & a vertical column fitted with a pointer. this column has a verticality bubble and is foldable for compactness. the height readings are displayed on digital display. supp lied in elegantly finished caring case/bag with working manual. makepie or similar. detail sp ecification given below-- (1) accuracy of gauge (+/-) 0.2mm. (2) least count (+/-) 0.1mm. (3) mea suring range- 900 to 1140 mm.(4) display- digital lcd display. firm to furnish calibration cert ificate traceable to nabl accredited labs. [ warranty period: 30 months after the date of delivery ] ] - digital buffer height gauge, model bhg-3 (cbc) the gauge consists of a foldable track base & a vertical column fitted with a pointer. this column has a verticality bubble and is foldable for compactness. the height readings are displayed on digital display. supplied in elegantly finished caring case/bag with working manual. makepie or similar. detail specification given below-- (1) accuracy of gauge (+/-) 0.2mm. (2) least count (+/-) 0.1mm. (3) measuring range- 900 to 1140 mm.(4) display- digital lcd display. firm to furnish calibration certificate traceable to nabl accredited labs.
supply of dial bore gauge with digital dial indicator of size 160-250mm with 0.001 mm graduation, 1 m m range of dial gauge indicator for measuring inner dia of end shields or bearing housings of traction motor . carrying case/ wooden box 01 number, material supplied with calibration certificate traceable to nabl acc redited agency. [ warranty period: 30 months after the date of delivery ] ] sr. section engineer bogie - dial bore gauge with digital
supply of maintenance gauges for casnub flat centre pivot top as per rdso drg. no. wd-2 5094-s/3, with calibration certificate issued from nabl approved lab. [ warranty period: 30 m onths after the date of delivery ] ] shop supdt inspection loco - set of gauges comprising brake beam pocket liner distance gauge and brake beam length gauge
supply of digital wheel diameter gauge (portable & folding type), for direct digital and analogue mea surement of diameter of railway bg wheel sets, as per annexure- a attached. [ warranty period: 30 mont hs after the date of delivery ] ] sse(c&w) / udaipur city, nwr - digital wheel diameter gauge
supply of supply-set of master rings for setting of snap gauges for outer diameter during overhauling of 6fra 6068 traction motor. set consist of 11 ite ms as follows consists outer dia. of sizes: (i) 100mm, (ii) 105mm, (iii) 127mm, (iv) 148mm, (v) 169mm, (vi) 179mm,(vii) 184 mm (viii) 205mm, (ix) 214mm, (x ) 305mm, (xi) 319mm tolerance (+/-) 0.005mm. material as per is 7018(part1)-1983/ is 3748 1990 and general tolerance as per is 3485 1983/ din 2250 part -i. quantity 01 number of each size to be supplied calibration certificate from nabl approved laboratory to be submitted along with material. [ warranty pe riod: 30 months after the date of delivery ] ] - supply-set of master rings for setting of snap gauges for outer diameter during overhauling of 6fra 6068 traction motor. set consist of 11 items as follows consists outer dia. of sizes: (i) 100mm, (ii) 105mm, (iii) 127mm, (iv) 148mm, (v) 169mm, (vi) 179mm,(vii) 184 mm (viii) 205mm, (ix) 214mm, (x) 305mm, (xi) 319mm tolerance (+/-) 0.005mm. material as per is 7018(part1)-1983/ is 3748 1990 and general tolerance as per is 3485 1983/ din 2250 part-i. quantity 01 number of each size to be supplied calibration certificate from nabl approved laboratory to be submitted along with material.
supply of setting gauge for lhb control arm bush assembly fixture as per icf drg no. j&t/f-0258/02.material -as per drawing. hardness - 50/55 hrc. su pply with calibration certificate - valid for 01 year issued from lab approved from nabl or similar accreditation board. [ warranty period: 30 months after t he date of delivery ] ] - setting gauge for lhb control arm bush assembly fixture & fixture for lhb control arm assembly
supply of supply, installation and commissioning of the single car test rig(sctr) complete along with a ll accessories as trolley,hose pipes with coupling, gauges etc. as per escorts drg.no.3kb 1944 (or similar) as per technical specification, drawing & instructions attached.make-escorts,knorr bremse and favieley or equivalent. [ warranty period: 30 months after the date of delivery ] ] sse/air brake shop/ubl - supply, installation and commissioning of computerized single car test rig
supply of set of cbc gauges one set consist of 06 gauges for checking of aar h type centre buffer co upler oflhb coaches. gauges made of hard steel alloy or stainless steel with hardness 45-50 hrc as per att achedspecifications (i) contour maintenance gauge (knuckle profile gauge): apta drawing/gauge no.31000 (ii) aligningwing limit gauge: apta drawing/gauge no. 32600 (iii) contour condemning limit gauge (jaw-g ap gauge) aptadrawing/gauge no. 34100-1 (iv) knuckle nose wear and stretch limit gauge: apta drawing/ gauge no.34100-2a (v)vertical height aligning wing pocket & guard arm gauge (go gauge-must pass): ap ta drawing/gauge no.34101-4(vi) vertical height condemning limit aligning wing pocket & guard arm gaug e (no-go gauge-must not pass): aptadrawing/gauge no.44250-5 note : nabl accredited calibration certifi cate with 24 months validity is required along with gauges. [ warranty period: 30 months after the date of delivery ] ] - set of cbc gauges one set consist of 06 gauges for checking of aar h type centre buffer coupler oflhb coaches. gauges made of hard steel alloy or stainless steel with hardness 45-50 hrc as per attachedspecifications (i) contour maintenance gauge (knuckle profile gauge): apta drawing/gauge no.31000 (ii) aligningwing limit gauge: apta drawing/gauge no. 32600 (iii) contour condemning limit gauge (jaw-gap gauge) aptadrawing/gauge no. 34100-1 (iv) knuckle nose wear and stretch limit gauge: apta drawing/gauge no.34100-2a (v)vertical height aligning wing pocket & guard arm gauge (go gauge-must pass): apta drawing/gauge no.34101-4(vi) vertical height condemning limit aligning wing pocket & guard arm gauge (no-go gauge-must not pass): aptadrawing/gauge no.44250-5 note : nabl accredited calibration certificate with 24 months validity is required along with gauges.
supply of manufacturing and supply of complete set of inspection gauges as per rdso drg no. t-900 2, alt-2 for 6400 mm curved switch with 60e1a1 thick web tongue rails for 1 in 8.5 turnout b.g.(1673 mm) for 60e1 rail on psc sleepers to drg.no. t-6280. tghe list of gauges as per rdso is enclosed as annexure -i. [ warranty period: 30 months after the date of delivery ] ] sse (p.way) depot phulera, - manufacturing and supply of complete set of inspection gauges
supply of supply of gauge (mr-bp) to kbi part no. ii107056 for trainset vb chair car [ war ranty period: 30 months after the date of delivery ] ] sse/coach undergear & - supply of gauge (mr-bp)
supply of kit of 12 gauges as per annexure of schaku coupler along with calibration certificate from govt/nabl approved test house. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] - kit of 12 gauges as per annexure of scha
supply of live line ohe measuring gauge (llomg) with data logging and reporting as per rdso speci fication no. ti/in/0046 dtd.16.02.2026. [ warranty period: 36 months after the date of delivery ] ] senior section engineer trd - live line ohe measuring gauge
LOADING...
