1. preparing detailed engineering design & drawings for spillway gates, conversion of existing hoisting system into individual hydraulic /electromechanical hoisting system with adequate capacity & automated scada/plc control integration. charges including expert professional fees, site visits, preparing & submitting design & drawings for approval. design should got approved from compentent authority - manufacturing, supply, erection, testing and commissioning of adequate capacity spindel type ho

Water Resources Department has invited bids for the 1. preparing detailed engineering design & drawings for spillway gates, conversion of existing hoisting system into individual hydraulic /electromechanical hoisting system with adequate capacity & automated scada/plc control integration. charges including expert professional fees, site visits, preparing & submitting design & drawings for approval. design should got approved from compentent authority - manufacturing, supply, erection, testing and commissioning of adequate capacity spindel type hoisting cylinder capable of working in two cylinders combined hoisting arrangement connected to each automatic and non automatic gate of bhatghar dam with all necessary accessories including cost of dismantling existing hoisting system, all materials, machinery, labour, transportation, testing against full load. 2. double acting cylinder:- each having capacity of 5 ton to 7.5ton, combined hoist capacity = 10 to 15 ton 2. stroke length: 2,750mm 10% 3. length of cylinder: 2950mm 10% 4. piston rod coating: cobalt laser welded cladding coating per en/din standards, with a corrosion resistance > 80.000h. (rate quoted shall be for one cylinder) power pack for combined hoist capacity (2 cylinders) = 10 to 15 ton 1.spindle type hoist system shall have electric motors suitable to control by a frequency drive, and onboard position sensor and end switches for open/close gate position. and should be kept on dam top with proper foundation. 2.spindle type hoist system must be equipped with a manual operation capability 3.both cylinders should be designed to accommodate universal type joint coupler along with gimbals. (rate quoted shall be for one power pack) 1. double acting cylinder: each having capacity of 3 ton to 5ton, combined hoist capacity = 6 to 10 ton 2. stroke length: 2,750mm 10% 3. length of cylinder: 2950mm 10% 4. piston rod coating: cobalt laser welded cladding coating per en/din standards, with a corrosion resistance > 80.000h. (rate per cylinder) power pack for combined hoist capacity (2 cylinders) = 6 to 10 ton :1.spindle type hoist system shall have electric motors suitable to control by a frequency drive, and onboard position sensor and end switches for open/close gate position. and should be kept on dam top with proper foundation. 2.spindle type hoist system must be equipped with a manual operation capability 3. both cylinders should be designed to accommodate universal type joint coupler along with gimbals. (rate quoted shall be for one power pack) general annual operation and maintainance of all hydraulic system parts for 5 years from comissioning. (rate quoted shall be for one gate).. Please refer to the tender document for project value and EMD details. Please refer to the tender document for the bid submission deadline, with the technical opening scheduled for 28 September 2026.