supply of "stone aggregate below 40 mm nominal, size", "stone aggregate 40 mm nominal size and, above", carriage of steel, unslaked lime, glue, green or blue medium shade pigment, cowdung, white cement, coal (steam), "water thinnable cement primer for interior wall surface, having voc content less, than 50 gms/litre", ready mixed pink or grey primer on wood work(hard and softwood) having voc content less than 50 gms/litre, red oxide zinc chromate primer, "synthetic enamel paint in black or, ch

Zilla Parishad has invited bids for the supply of "stone aggregate below 40 mm nominal, size", "stone aggregate 40 mm nominal size and, above", carriage of steel, unslaked lime, glue, green or blue medium shade pigment, cowdung, white cement, coal (steam), "water thinnable cement primer for interior wall surface, having voc content less, than 50 gms/litre", ready mixed pink or grey primer on wood work(hard and softwood) having voc content less than 50 gms/litre, red oxide zinc chromate primer, "synthetic enamel paint in black or, chocolate shade", acrylic exterior paint, "synthetic enamel paint, having voc ( volatile organic compound content less, than 150 gm/liitre", superior copal varnish, black japan, coal tar, water proofing materials, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., "rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume, red brown etc", vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), "hydraulic door closer tubular type, aluminium section body", "brass 150 mm floor door stopper (0.357, kg)", "anodised aluminium hanging type door, stopper", "chromium plated brass mortice latch and, lock 100x65 mm with 6 levers and a pair of brass lever handles", "30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c, carriage", "rolling shutter made of 80x1.25 mm, machine rolled laths", oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, "chlorinated polyvinyl - chloride (cpvc), pipe 15 mm outer dia", "chlorinated polyvinyl - chloride (cpvc), pipe 20 mm outer dia", "chlorinated polyvinyl - chloride (cpvc), pipe 25 mm outer dia", "chlorinated polyvinyl - chloride (cpvc), pipe 32 mm outer dia", "chlorinated polyvinyl - chloride (cpvc), pipe 40 mm outer dia", "chlorinated polyvinyl - chloride (cpvc), pipe 50 mm outer dia", "shower rose c.p brass for 15 to 20 mm, inner 100 mm dia", "shower rose c.p.brass for 15 to 20 mm, inner 150 mm dia", "brass full way valve with c.i. wheel, (screwed end) 20 mm dia", c.p.brass bibcock 15 mm, c.p. brass long body bibcock 15 mm, c.p. brass stop cock (concealed) 15 mm, 15 mm ptmt bib cock, ptmt push cock 15 mm, ptmt pillar cock, "flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings,, accessories and flush pipe)", "vitreous china flat back wash basin, 450x300 mm", "vitreous china flat back wash basin, 630x450 mm", "vitreous china flat back wash basin, 550x400 mm", "vitreous china angle back wash basin, 400x400 mm", vitreous china pedestal for wash basin, gi pipes 15 mm dia, gi pipes 20 mm dia, gi pipes 25 mm dia, gi pipes 32 mm dia, gi pipes 40mm dia, gi pipes 50 mm dia, gi pipes 65 mm dia, gi pipes 80 mm dia, adhesive solvent cement, "h.p. or l.p. ball valve with polythene, floats: 15 mm dia", "h.p. or l.p. ball valve with polythene, floats: 20 mm dia", "h.p. or l.p. ball valve with polythene, floats: 25 mm dia", "upvc pipes (working pressure 4 kg /cm2, ) single socketed pipe 75 mm dia", "upvc pipes (working pressure 4 kg / cm2, ) single socketed pipe 110 mm dia", upvc bend 87.50, 75 mm bend, upvc bend 87.50, 110 mm bend, "upvc single equal tee (without door), 75x75x75 mm", "upvc single equal tee (without door), 110x110x110 mm", "upvc single equal tee (with door), 75x75x75 mm", "upvc single equal tee (with door), 110x110x110 mmmm", upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, coloured inter locking c.c. paver block, slotted cowl (terminal guard) 75 mm dia, slotted cowl (terminal guard) 100 mm dia, "circular shape 450 mm dia precast, r.c.c. manhole cover with frame l.d. -25", "coloured orissa pattern w.c. pan, 580x440 mm", "coloured pedestal type w.c. pan, 580x440 mm (european type)", mirror of superior make glass 60x45 cm, "ptmt - soap dish/holder 138x102x75, mm", "ptmt - liquid soap container of 400 ml, capacity", "white plastic seat (solid) with lid c.p., brass hinges and rubber buffers", "vitreous china foot rest, 275mmx125mmx25mm", vitreous china squatting plate urinal, "white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as, per is: 2556", geotextile 120 gram per sqm membrane, c.i. grating 100x100 mm, "mild steel tubes hot finished seamless, type", galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, diesel oil, galvanised steel plain sheets, "seam bolts and nuts 6 mm dia and 25, mm long", g.i. plain washer for seam bolts, "stainless steel bolts /square bar and, plates", welding by electric plant, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, gi wire, portland cement, "stone aggregate(single size): 10 mm, nominal size", "stone aggregate(single size):20 mm, nominal size", "stone aggregate(single size): 40 mm, nominal size", moorum, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 450 mm dia np -3 spigot, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, rcc pipe 1000 mm dia np -3 spigot, rcc pipe 1200 mm dia np - 3 spigot, rcc pipe 1800 mm dia np- 3 spigot, rcc pipe 450 mm dia np- 4 spigot, rcc pipe 600 mm dia np- 4 spigot, rcc pipe 900 mm dia np- 4 spigot, rcc pipe 1000 mm dia np- 4 spigot, rcc pipe 1200 mm dia np- 4 spigot, rcc pipe 1800 mm dia np- 4 spigot, "hire charges of concrete mixer 0.25 to, 0.40 cum with hopper", vibrator (needle type 40 mm), "hire charges of diesel road roller- 8 to, 10 tonne", "brick aggregate (single size):50 mm, nominal size", "brick aggregate (single size):40 mm, nominal size", "stone aggregate(single size):63 mm, nominal size", "carriage of cost of neelgiri/maxican, grass truf sqm", polyethylene water storage tank with cover and suitable locking arrangement, "stone aggregate(single size): 06 mm, nominal size", wire mesh (rabbit), water tanker 5000 ltr. capacity, surface vibrator, wood dust, sal silliguri, sal malaysia, neem wood, other local wood, ordinary teak wood, sisu/gamar wood, local sal wood, "bright finished or black enamelled mild, steel screws 40 mm", "bright finished or black enamelled mild, steel screws 20 mm", "bright finished or black enameled mild, steel butt hinges 50x37x 1.50 mm", "bright finished or black enameled mild, steel butt hinges 75x47x 1.70 mm", "bright finished or black enameled mild, steel butt hinges 100x58x 1.90 mm", coal tarring, fan hook, "r.c.c ventilator of 20 mm. thick upto, 0.10 sq.m. area", "r.c.c ventilator of 20 mm. thick above, 0.10 sq.m. area", udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, "chawk dungri marble slab ( for floor,, lobby etc) 18 mm thick of size 0.3 sq m to, 0.6 sq m", udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, "chawk dungri marble slab ( for, wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m", "frp composite door frame 66mm x, 70mm", "frp composite door frame 66mm x, 90mm", "coloured pedestal type w.c. pan, 580x440 mm (european type) s trap", 32 mm dia polythene flush pipe, "18 mm thick marble partition slab for, urinals including fitting fixing (with chawk doongri marble)", "gi pipe 32 mm dia medium quality for, underground works", "gi pipe 40 mm dia medium quality for, underground works", cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia) [for concealed work], cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia) [for concealed work], cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia) [for concealed work], "chromium plated stop cock (equivalent to code no. 513(a) & 513(b) & model - tropical / sumthing special of essco or, similar brand).", "chromium plated angular stop cock with wall flange (equivalent to code no. 5053 & model - florentine of jaquar or similar, brand).", "polythene bib cock / stop cock (hd) with, metal/plastic inlet (emco / atlas or equivalent)", "sink 630 mm x 550 mm x 180 mm with, waste fittings and two coats of painting of, c.i. brackets", "supplying, fitting and fixing pillar cock of approved make.cp pillar cock - 15 mm. (equivalent to code no. 507 & model tropical / sumthing special of essco or, similar brand).", "15 mm swan neck tap with left & right hand operating nob with aerator (equivalent to code no. 510, 510(a) and model - tropical / sumthing, special of essco or similar brand).", structural members of specified sections weighing less than -22.5 kg./m (e.g. joists, angle, channel sections conforming to is: 226, is: 808 & sp (6)- 1964), "structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is: 226, is: 808 & sp (6)- 1964) weighing less, than 22.5 kg/ m", "m.s. structural works in roof trusses with tubular sections conforming to is: 806-1968 & is: 1161- 1998 (trusses spanning, up to 12.00 m)", "m.s. structural with hollow sections (square or rectangular shape) conforming to is: 806-1968 & is:1161-1998) span up, to 12 mtr", "p.v.c. connector 15 mm dia 600 mm, long", polythene waste fittings complete 32mm, waste pipe, with pvc coupling at one end fitted with necessary clamps 900 mm long, fly ash bricks(traditional), iron hasp bolt 250mm long, iron door ring 50mm dia, iron catch hook 6mm dia 225mm long, "m.s clamps 40mm x 6mm, 125mm, length", anodised aluminium barrel / tower / socket bolt 150mm long x 10mm dia. bolt., anodised aluminium barrel / tower / socket bolt 300mm long x 10mm dia. bolt., anodised aliminium d-type handle continuous plate base (hexagonal/ round rod) 150 mm grip x 10 mm dia rod, towel rail (cp over brass )- 600 mm, collapsible gate, steel railing, "ms integrated grill for steel window and, ventillator", 1.5 mm thick ms sheet, ci manhole cover 450 mm dia, c.p. over brass waste fittings 32 mm, malayasia sal cleat, two point nose steel handle, "openable steel windows as per is sizes with side hung shutters and horizotal, glazing bars.", top hung side hung ventilator, "fixed type ventilators as per i.s. sizes, with horizontal glazing bars height being limited to 580 mm", c.p. over brass waste fittings 32 mm, waste pipe, with pvc coupling at one end fitted with necessary clamps 900 mm long, waste pipe, with pvc coupling at one end fitted with necessary clamps 750 mm long, "false ceiling (with 4mm thick pearl, designer fibre cement board)", "false ceiling (with 6mm thick fibre, cement designer board)", "supplying, fitting & fixing asbestos, corrugated sheet(6 mm thick)", "supplying, fitting & fixing asbestos, ridging", "supplying, fitting & fixing zn-al alloy steel, sheet work in roof", "supplying, fitting & fixing aluminium, sheet ridging", "fitting and fixing glass reinforced polyester translucent fiber glass sheet 2mm thick, sheet", fitting and fixing glass reinforced polyester translucent ridging 1.6 mm thick shhet, "fitting & fixing circular corrugated, aluminium sheet", "supplying,fitting & fixing of 2-track / 3-, track aluminium sliding window", "supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf, aluminium swing door", "supplying, fitting & fixing of aluminium fixed partition wall of all aluminium, sections", upvc plain y 75 mm dia, upvc plain y 110 mm dia, "supplying solid flush type doors of, commercial quality", bitumen vg-30, modular fly ash bricks, modular clay bricks, bitumen emulsion, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), grade 1 stone metal 63 mm to 45 mm, "chain link fencing 75mm x 75mm mesh, 12g wire including fixing", "fencing post 215 cm 150 mm x 150 mm section at bottom, 100 mm x 100 mm section at top with t-base 300 mm x 150 mm x 100 mm, having 4 nos 6 mm dia vertical m.s. reinforcement and 6 mm dia binders @ 200 mm centres, finished, smooth", fixing post of iron or precast concrete incl. digging hole, packing the hole with cement concrete (1:3:6) with jhama khoa and necessary plaster with 15 cm th cement plaster (1:6) complete, "grill weighing above 10 kg./sq.mtr and up, to 16 kg./sq. mtr.", galvanised barbed wire 3 ply 12 gauge / 4 points including fittings and fixing to the post complete in all respect., bamboo (8cm-10cm dia) including fixing, shower jet, corner urinal, ci p trap, ci s trap, porcelain p trap, porcelain s trap, check valve 32mm, check valve 40mm, check valve 50mm, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, "hire charges for hand cart, tri cycle, trolly, panja, kata,gi bucket, boxes, basket etc, complete set", reducing socket 20mm x 15mm, reducing socket 25mm x 20mm, reducing socket 25mm x 15mm, reducing elbow 20 mm x 15 mm, reducing elbow 25 mm x 20 mm, open weave jute geo-textile (jgt) having overall weight of 500 gm per sq. m thickness 5 mm, width 1220 mm, tensile strength 10 kn/m x 7.50 kn/m including lapping, staples or nails, testing, "woven jute geo-textile (jgt) 724 gm/sqm possessing tensile strength of 25 kn/m including lapping, staples or nails,, testing", silver sand, "tor steel rods/hysd bars/tmt bars (jsw/jspl/shyam/srmb/bmasl/ele crosteel/ssl)(fe415/fe500/fe500d, conforms to is: 1786)", "tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srm b/bmasl/elecrosteel/ssl)(fe415/f, e500/fe500d conforms to is: 1786)", 1st class picked jhama bricks(traditional), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ), laterite boulder, fine sand, medium sand, coarse sand, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sal bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), nail, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, "hire charges of shuttering plank (25mm-, 30mm thick) without prop including all fittings", "hire charges of shuttering plank (above 30mm-37mm thick) with prop including all, fittings", hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, loading unloading & stacking sand/ stone aggregate (less than 40mm nominal size), loading unloading & stacking stone aggregate (above 40mm nominal size), "loading unloading & stacking lime,, moorum, building rubish and similar miscellaneous material", stone screening type a (13.2 mm), stone screening type b (11.2mm), 1st class kiln burnt brick (traditional), thermocol 12.5 mm thick., empty gunny bag, polythene sheet (150 gm per sqm), "tor steel rods/hysd bars/tmt bars (sail/tata/rinl) (fe415/fe500/fe500d, conforms to is: 1786)", sausage wire net, "loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 600, 700, 750, & 800 mm dia", loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 900 mm dia, "loading, unloading and stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced) cement pipes 1000,, 1100 & 1200 mm dia", "loading, unloading and stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced) cement pipes 1400 &, 1800 mm dia", river bed material 40 mm down, nylon net, paddy straw. The estimated project cost is ₹0.01 Cr, with an EMD of ₹0 Cr. Interested bidders can submit applications until 28 September 2026, with the technical opening scheduled for 30 September 2026.