providing septic tank and sanitary items to new pongal sheds opposite p.r. building belongs to sri boyakonda gangamma temple at diguvapalli (v),chowdepalli(m),chittoor(d). - earth work excavation for foundations (manual means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and 1m additional lift charges over the initial depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking,
rutting etc., and overheads & contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per ss 20 b(apss 308), filling with carted coarse sand in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental ,labour charges,hire charges of t&p etc., and overheads & contractors profit complete for fnished item of work(apss no.309&310), plain cement concrete (1:4:8) (cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (apss no. 402), brick masonry for panel walls in superstructure with cm (1:6) prop: (cement : screened sand) using common burnt clay bricks of class as per table- i of is:1077-1992, non- modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 kg/sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (apss no. 501 & 504)., plastering 12mm thick single coat in cm(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(ss 901,903 & 904), vrcc m-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of is456 using 20mm size machine crushed hard granite metal (coarse aggreegate)from approved quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering shuttering :, providing high yield strength deformed (hysd) (fe 415/500 grade as per is 1786-1979) of different diameters for rcc works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 swg, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work in all floors.( apss no.126), preparation and fixing of m.s. heavy grills for trusses, stanchions,heavy beams and girders using chain pulley block,derek pole arrangements etc., in position including cost of mild steel squares/flats etc.,welding rods,power charges and fixing charges etc., complete., supply and installation of pre-painted galvanized trapezoidal profile roofing sheets with 0.50mm thickness, coating: zinc coating z120 gsm.tensile strength: 550 mpa. paint coating: regular modified polyester painting. painting thickness (top): 18 to 20 microns,(bottom): 5 to 7 microns. sheet width: 1.020, length: maximum 12 meters with regular range colours including cost and conveyance of all meterials and labour charges ctc; complete per finished item of work; as per drawing and as directed by engineer in-charge., providing and fixing factory made upvc white colour sliding glazed window upto1.50m in height dimension comprising of upvc multi chambered frame with in-built roller trackand sash extruded profiles duly reinforced with 1.600.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to upvcprofile),appropriate dimension of upvc extruded glazing beads and upvc extruded inter locks,epdm gasket,wool pile,zin calloy(white powder coated) touch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg),g.i fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screwsetc. profile offrame & sash shall be mitred cut andfusion welded at all corners, including drilling of holes forfixing hardware's and drainage of water etc. after fixing frame the gap between frame and adjacent finished walls shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of engineer -in -charge inclusive of cost of single/double glasspanes, wiremesh and silicon sealent .note: a) upvc windows, b) upvc ventilators, providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work., supplying and fixing indian make flat back wash hand basin (hsw/parryware/ neycer) 1st quality conforming to is:2556-part-4:1972 of size 550mm x 400mm with 32 mm nominal size c.p. fitting with parallel pipe thread conforming to is:2963-1979 and fitted with 15 mm nominal bore chromium plated pillar tap of 1st quality indian make 400 grams seiko/senior/nice or equivalent complete with standard ci brackets including wooden blocks ,1 no.12.70mm pvc connection with brass union nuts cp coated , 1 no.12.70mm np bib tap 400 gms seiko or equivalent , 31.75mm dia. pvc flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work, supply, installation and commissioning approved make floor mounted close coupled ewc suit cascade model 'p' or 's' trap with dual flush porcelain cistern fixed on ewc with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long pvc inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: coloured - grade - i/ grade - ii . bmw-d.19, supplying and fixing of swr pvc pipes (prince/sudhakar/kisan/supreme or any isi brand) 4 kg/sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with pvc clamps if necessary with required number of bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (apss no. 1302 1319 & 1326).
Tender247 tries to ensure accurate & authentic tender information at its level best however it cannot be held responsible for Omissions, Errors, etc. Users are advised to refer to Tender Document published by Procuring entity before participating / submitting bid.
LOADING...
