rate contract for implants (trauma, spine, arthroscopy) at government rbm hospital, bharatpur- femur interlocking nail (with locking screws, 9 to 13 mm diameter, length 340 to 460 mm)., locking bolts for femur (14.9 mm, lengths 24 mm to 70 mm)., tibia interlocking nail (with locking screws, 8 to 11 mm diameter, length 285 to 405 mm)., locking bolts for tibia (3.9 mm & 4.9 mm, lengths 24 mm to 70 mm)., expert tibia interlocking nail (with locking screws, 8 to 11 mm diameter, length 285 to 405

Medical And Health Services has invited bids for the rate contract for implants (trauma, spine, arthroscopy) at government rbm hospital, bharatpur- femur interlocking nail (with locking screws, 9 to 13 mm diameter, length 340 to 460 mm)., locking bolts for femur (14.9 mm, lengths 24 mm to 70 mm)., tibia interlocking nail (with locking screws, 8 to 11 mm diameter, length 285 to 405 mm)., locking bolts for tibia (3.9 mm & 4.9 mm, lengths 24 mm to 70 mm)., expert tibia interlocking nail (with locking screws, 8 to 11 mm diameter, length 285 to 405 mm)., humerus interlocking nail (with locking screws, 6 mm to 8 mm diameter, length 200 to 300 mm)., locking bolts for humerus (3.4 mm & 3.9 mm, lengths 24 mm to 70 mm)., pfn nail short (stainless steel) (9 to 12 mm diameter, length 250 mm)., pfn leg screws (6.4 mm & 8.0 mm, lengths 50 mm to 120 mm)., pfn nail long (left/right, stainless steel) (9 to 11 mm diameter, length 340 mm to 460 mm)., pfn a2 nail short & long (stainless steel with proximal blade/t3 screw)., dfn supra condylar nail (with locking options, 9 mm to 12 mm diameter)., reconstruction plates & screws (3.5 mm, 4.5 mm, and 5.0 mm hole sizes; 4 to 16 holes)., cortical & cancellous screws (various dimensions ranging from 1.5 mm to 6.5 mm)., tubular & semi-tubular plates (1/3 tubular, 3.5 mm dcp holes, 4 to 12 holes)., mini dcp plates (2.7 mm, 4 to 10 holes, and metacarpal variants)., pelvic reconstruction plates (straight, curved, j-plate, and symphyseal plate variants)., dynamic compression plates (dcp) (broad, narrow, and small variants in standard and low contact configurations)., t-plates & t-oblique locking plates (3.5 mm holes, left/right configurations)., distal radius locking plates (2.4 mm standard and variable angle variants)., locking olecranon plates (left & right, 5, 7, 9, 11 holes)., locking tibia & fibula plates (medial tibia, anterolateral distal tibia, and distal fibula variants)., locking humerus plates (posterolateral distal, distal medial, extra-articular distal, and proximal philos types)., locking clavicle plates (standard, hook, and lateral extension variants)., distal femoral & proximal lateral tibia locking plates (5 to 15 holes)., medial high tibia osteotomy (hto) plates (small and large)., locking calcaneal plates (small, medium, large)., dhs / dcs plates (135 and 95 variants, dynamic/locking types, with stabilization plates)., titanium elastic nails & enders nails (all standard diameters and lengths)., prostheses (austin moore prosthesis, bipolar prosthesis fenestrated/non-fenestrated, modular bipolar system, and radial head prosthesis)., ilizarov & external fixator systems (rings, nuts, bolts, telescopic rods, schanz pins, and jess distractor sets)., bone cements (standard 20g/40g, and antibiotic-loaded variants)., ii. knee & shoulder arthroscopy items, interference screws (beta tcp, plla-ha coated, and titanium variants)., acl buttons (fixed loop and adjustable loop variants)., suture loop anchors & tapes (1.5 mm, 1.8 mm, 2.5 mm options; single and double loaded)., knotted & knotless anchors (titanium and peek configurations)., meniscus repair systems (all-inside suture devices, needles, guns, and cannulas)., rf ablator probes (disposable, bipolar, suction & non-suction options)., rotator cuff passer & lasso suture passer (left & right, with disposable needles)., arthroscopy consumables (shaver blades, round/oval burrs, arthroscopy cannulas, and specialized disposable drape kits for knee, shoulder, and hip)., iii. spine system (all titanium unless specified) [49], pedicle screws (thoracolumbar fixation), mono-axial screws (dual thread): diameters 4.5 mm, 5.5 mm, 6.5 mm; lengths 25 mm to 70 mm. poly-axial screws (dual thread): diameters 4.5 mm, 5.5 mm, 6.5 mm, 7.5 mm, 8.5 mm; lengths 25 mm to 100 mm., mono & poly reduction screws: diameters 4.5 mm, 5.5 mm, 6.5 mm, 7.5 mm; lengths 18 mm to 60 mm., uni planar screws: diameters 4.5 mm, 5.5 mm, 6.5 mm; lengths 30 mm to 60 mm., cannulated-fenestrated screws: poly-axial and reduction variants, diameters 5.5 mm & 6.5 mm, single thread screws: mono-axial and poly-axial configurations, diameters 4.5 mm, 5.5 mm, 6.5 mm., mis pedicle screw system (dual thread, fenestrated reduction screws, diameters 5.5 mm, 6.5 mm, 7.5 mm; includes 120 mm head variants)., spinal connecting rods, standard spine rods: diameter 5.5 mm, lengths 40 mm to 600 mm (available in titanium and cobalt-chromium [cocr])., mis pre-bent & straight rods: lengths 35 mm to 260 mm (titanium & cocr options)., cervical systems, anterior cervical plates: level 1 (4-hole), level 2 (6-hole), level 3 (8-hole); lengths 21 mm to 72.5 mm., cervical screws: diameters 4.0 mm, 4.3 mm, 4.5 mm; lengths 10 mm to 20 mm., posterior cervical screws: full thread, short thread, smooth shank variants; diameters 3.5 mm & 4.0 mm; lengths 12 mm to 40 mm., spine cages, mesh cages: diameters 10 mm to 20 mm, length 90 mm., plif bullet cages: pinnacle and zenith models (sizes 7 to 16; available in titanium and peek materials)., tlif banana cages: lengths 27 mm & 30 mm, width 12 mm (titanium & peek)., anterior cervical cages: duo and stand-alone configurations, sizes 5 mm to 11 mm., connectors & specialized hardware,. The estimated project cost is ₹0.09 Cr. Please refer to the tender document for EMD details. Interested bidders can submit applications until 6 October 2026, with the technical opening scheduled for 6 October 2026.