procurement of casing hole logging equipment : 30 70019792 hmx booster( bidirectional) for use in tandem gun part no, : 2505675 or equivalent 150 no, 150 70019799 3-3/8" (86 mm) blast sleeve part no, : 2315826 or equivalent 6 no, 20 70024246 detonating cord hmx 80 gr/ ft. rilsan /teflon or equivalent jacketed low shrink (1% max.) 100% inspected. recommended to be used in exposed condition having following parameters: 1) temp. rating: 400 f (204c) air rating for 01 hour. 2)pressure rating: 15,000
psi (1057 kg/cm sq. [152.5 mtrs./ 500 ft. in 01 roll or in 4 to 6 pieces also acceptable] 1000 m 10 70024692 3.3/8"-3.5" sdp tag charges, hmx/rdx 3-3/8" -3.5" super deep tag charges (with charge clip), 6 spf, hmx/rdx , minimum acceptable performance in 5.1/2" cemented casing as per api `rp-19b' as follows: 1) ehd= 0.34 inch (min.), 2) ttp = 40 inch (min.), 3) temp rating (min.): 325 f (163c), min. 4) pressure rating: 15000 psi. (min.) 15000 no, 40 70024705 booster kit-for tag gun assy. 150 no, 50 70024711 rf-safe electronic detonators-fluid disabled-temperature resistant temp rating: 325f 300 no, 60 70024709 3-3/8"x 3.5/4 ft.(1m) 6 spf gun assy.-tag gun 3 3/8"(86 mm)- 3.5''(89 mm)od x 3.5 ft./4 ft./(1m) 6 spf- threaded type complete shipping /gun assy. for tag gun charges. ( includes scallop gun3.5 ft/4ft/1m, tube charge holder -3.5 ft/4 ft/1m, fixture alignment, snap ring, screw, cap etc.) 30 no, 024694 3 3/8"(86 mm)- 3.5''(89 mm)od x 7 ft.(2m) 6 spf- threaded type complete shipping /gun assy. for tag gun charges. (includes scallop gun- 7ft/2m, tube charge holder -7ft/2m, fixture alignment, snap ring, screw, cap etc.) 30 no, 80 70024695 3 3/8"(86 mm)- 3.5''(89 mm)od x 11 ft.(3m) 6 spf- threaded type complete shipping /gun assy. for tag gun charges.( includes scallop gun- 11 ft/3m, tube charge holder -11ft/3m, fixture alignment, snap ring, screw, cap etc.) 80 no, 90 70024696 3 3/8"(86 mm)- 3.5''(89 mm)od x 14 ft./15 ft./5m 6 spf- threaded type complete shipping /gun assy. for tag gun charges. (includes scallop gun14 ft./15 ft./5m, tube charge holder -14 ft./15ft /5m, fixture alignment, snap ring, screw, cap etc.) 120 no, 100 70024699 3-3/8'' tag gun- tandem sub threaded type 3-3/8''(86 mm) tag gun- threaded type tandem sub 6 no, 110 70024700 o-ring set for top sub-3-3/8'' tag gun. 3-3/8'' (86mm) tag gun-o-ring set for top sub-details to be provided. (e. g if top sub needs 2 o-rings, 1 set = 2 o-rings) 150 set 120 70024701 o-ring set for bull plug-3-3/8'' tag gun 3-3/8'' tag gun-o-ring set for bull plug. details to be provided.(e. g if bull plug needs 2 o-rings, 1 set = 2 o-rings) 80 set 130 70024702 o-ring set for tandem sub-3-3/8'' tag gun 3-3/8''(86mm) tag gun-o-ring set for tandem sub. details to be provided. (e .g if tandem sub needs 4 o-rings, 1 set = 4 o-rings) 50 set 140 70024703 teflon lead wire assy. with contact spring-for 3-3/8'' tag gun 350 no, 160 70024697 3-3/8'' tag gun top sub (firing head) go-type3-3/8''(86 mm) tag gun-threaded type top sub (firing head) with tubular nut if any- go-type compatible with quick change assembly 6 no, 170 70024698 3-3/8'' tag gun- bull plug/bottom sub 3-3/8''(86 mm) tag gun-threaded type bull plug/ bottom sub 6 no, 180 70024710 firing panel for rf-safe electronic detonators (red) with all essential accessories/kit. 2 no,
Tender247 tries to ensure accurate & authentic tender information at its level best however it cannot be held responsible for Omissions, Errors, etc. Users are advised to refer to Tender Document published by Procuring entity before participating / submitting bid.
LOADING...
