providing walking track, gym play equipment, badminton court at sai ram layout park in ward.no.96 of pendurthi zone area of gvmc - engaging of front end loader for jungle clearnace and including cost and conveyance of all materials and labour charges as per ss and as directed by the department officers, engaging of tipper for conveynace of debries and waste materials from site to dummping yard etc., complete as per ss and as directed by the dept. officer, earthwork excavation for foundations
nd depositing on bank for all lifts and with an initial lead of 10m including all operational incidentalm labour charges such as shoring, sheeting, planking, struting, etc, complete for finished item of work including seigniorage exclduing dewatering charges etc, per ss - 20 b (apss 308), filling with stone crusher dust in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, seignorage charges, hire charges of t & p etc., complete for finished item of work., plain cement concrete (1:4:8) proportion (cement: fine aggregate: coarse aggregate) using 40mm size hard broken granite (is383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, mixing concrete in concrete mixer including all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work., brick masonry in cm (1:8) with with flyash cement solid bricks of size 290x225x140mm having a compression test not less than 50 kg/sqcm including cost and conveyance of all materials, seigniorage charges and labour charges for mixing of mortor watering curing etc. complete., plain cement concrete grade m20 - nominal mix (cement fine aggregate: coarse aggregatge) corresponding to table 9 of is 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage chargers, sales & other taxes on all materials including all operational, incidental and labour charges such as machines mixing, laying concrete, curing etc., complete as per ss, plastering in cement mortar (1:3) 12mm thick watering for curing including cost of materials, scafolding and watering and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the engineer - in - charge., painting two coats with acrylic exterior emulsion paint having voc (volatile organic compound ) content less than 50 grams/ liter over plastered surface for external walls including cost & conveyance of all materials and all labour charges etc complete as per ss and as directed by the department officers., supply fabrication of steel (structural) and erection of ms space frame structure with supplyting, fabricating installing the roof stucture in structural steel with necessary curvature as including cost and conveyaance, watering, tamping including all labour charges, roofing with pre-painted galvalume trapezoidal profile roofing sheets with 0.50mm thickness, coating: alu-zinc coating az150 gsm. tensile strength: 550 mpa. paint coating: regular modified polyester painting. painting thickness (top): 18 to 20 microns, (bottom): 5 to 7 microns. sheet width: 1.020, length: maximum 12 meters with regular range colours - for dome cap type roofing fixed over the ready made steel roof structure having a bottom diametre of 36.4 metres and rise of 4.0 metres., flooring with high polished granite slabs ... mm thick other than black set over base coat of cement mortar (1:4), 20 mm thick over cc bed already laid or rcc roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, including seigniorage charges, labour charges for dressing of, formation of 150 mm thick (consolidated) walking track layer using red earth@60%,crusher dust@30% & saw dust@10% mixed thoroughly homogeneous and spreading to even surface and consolidation with hand roller and watering etc.complete finished item of work as per instructions of the department.true to uniform gradients to the possible extent., providing rcc well rings for 1.2m x 0.30m including cost and conveyaance, watering, tamping including all labour charges etc., complete as per ss and as directed by the engineer - in - charge., supply, delivery and fixing of badminton court poles and volley ball court poles including all labour charges etc., complete as per ss and as directed by the engineer - in - charge., supply, delivery and fixing of badminton court and volley ball court nylon nets including all labour charges etc., complete as per ss and as directed by the engineer - in - charge., providing and laying of interlocking concrete block pavements of glass fibre reinforced concrete pavers of size 225 x 175 mm and thickness of not less than 60mm heavy duty conforming to is 15658:2006 including cost & conveyance of all materials and all labour charges etc complete as per ss and as directed by the department officers., "malty activity play system ( special ), descriptions, ? product area : 32ft x 19ft, ? safe play area : 21ft x 42 ft, ? age group: 5-14 yrs., ? friends at a time : 15 to 18, ? platform height : 3 ft,5ft & 7f", "net rock climber 2.1 metres( pgsl 30 ), in this net rock climber pad: rock climber 7ft. pad made from fibber reinforced plastic, (frp) attached to the angular frame. the pad is provided with rock shaped part, ergonomically spaced in zigzag manner for climbing act.", "twindler go round( pgmr 01), railings: the four railings made from 15nb galvanized pipe conforming to is 1239(part, 1):1979 fixed to frp platform at one end and the other end fixed to the platform frame., platform: twindler mgr platform made from gi coated framed structure mated to fibre, reinforced plastic over the top to form a specially designed curved platform", "single board abs with centre pipe & prime, stand sleeve shall be minimum of 100mm nb dia of thickness not less than 5.00mm,footrest support & sit up board support pipe shall be minimum of 50mm nb dia of thickness not less than 4.1mm, handle frame & seat frame support shall be minimum of 24mm nb die of thickness not less than 3.6mm & connecting link pipes shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade with hot dipped galvanised with minimum of 60 microns zinc dipped joint with robotic welded. sit up board made with high quality frp / ss304 perforated material. all pipes shall be uniformly powder coated up to minimum 90 microns hickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed steel for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be 750mm deep with minimum of 100mm nb dia supported with m.s. all plastic parts should solid poly propylene co-polymer (ppcp) and uv- stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms. with one year warranty.", aero rider with main frame shall be minimum of 100mm nb dia of thickness not less than 5.00mm, handle frame & seat frame shall be minimum of 32mm nb dia of thickness not less than 3.6mm & connecting link pipes shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade with hot dipped galvanised with minimum of 60 microns zinc dipped joint with robotic welded. the handle frame are hinged over 100nb main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. seat s are made with the hdpe sheet of size. all pipes shall be uniformly powder coated up to minimum 90 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be 750mm deep with minimum of 100mm nb dia supported with m.s. angle. all plastic parts should solid poly propylene co-polymer (ppcp) and uv stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms and t. with one year warranty, hand rower with base link pipe shall be minimum of 100mm nb dia of thickness not less than 5.00mm, upper link pipe shall be minimum of 50mm nb dia of thickness not less than 4.1mm & connecting links & handle links pipes shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade with hot dipped galvanised with minimum of 60 microns ionized coated and zinc dipped joint with robotic welded. the handle frame are hinged bearings should be reputed make and press fitted for smooth rotation, and does not require republication i.e., maintenance - free ball bearing. seat rest is made with the lldpe sheet of with uniform bending radius to avoid sharp edges. all pipes shall be uniformly powder coated up to minimum 90 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be 750mm deep with minimum of 100mm nb die supported with m.s. angle the solid poly propylene co-polymer (ppcp) and uv- stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms and. with one year warranty., shoulder exerciser double with prime stand pipe shall be minimum of 100mm nb dia of thickness not less than 5.00mm, handle frame & seat frame shall be minimum of 32mm nb dia of thickness not less than 3.6mm & connecting links shall be minimum of 25mm nb die of thickness not less than 3.60mm are of 'c' class heavy grade make with hot dipped galvanised with minimum of 60 microns zinc dipped joint with robotic welded. the two handle frames are hinged over 100nb prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. seat & back rests are made with the lldpe with uniform bending radius to avoid sharp edges. all pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be 750mm deep with minimum of 100mm nb dia supported with m.s. angle. all plastic parts should solid poly propylene co-polymer (ppcp) and uv- stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms and. with one year warranty, "ovate stepper with prime stand pipe shall be, minimum of 80mm nb dia of thickness not less than 4.50mm, pedal link pipe shall be minimum of 50mm nb dia of thickness not less than 4.1mm, handle frame pipes shall be minimum of 32mm nb dia of thickness not less than 3.60mm and handle grips shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade of with hot dipped galvanised with minimum of 60 microns zinc dipped joint with robotic welded. the pedal frame are hinged over 80nb prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re lubrication i.e., maintenance - free ball bearing. foot rest shall be made of. all pipes shall be uniformly powder coated up to minimum 90 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be 750mm deep with minimum of 100mm nb dia supported with m.s. the all plastic parts should solid poly propylene co-polymer (ppcp) and uv- stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms with one year warranty.", "aerial stroller double with three prime stand pipes shall be minimum of 100mm nb dia of thickness not less than 5.00mm, pedestal frame shall be minimum of 32mm nb dia of thickness not less than, 3.6mm & handle frame shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade make with hot dipped galvanised with minimum of 60 microns zinc dipped joint with robotic welded. the two pedestal frames are hinged over 100nb prime stand pipes with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re- lubrication i.e., maintenance -free ball bearing. all pipes shall be uniformly powder coated up to minimum 90 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be 750mm deep with minimum of 100mm nb dia supported with m.s. angle. all plastic parts should solid poly propylene co-polymer (ppcp) and uv- stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms with one year warranty", "chest press double with prime stand pipe shall be minimum of 100mm nb dia of thickness not less than 5.00mm, handle frame & seat frame shall be minimum of 32mm nb dia of thickness not less than, 3.6mm & connecting links shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade with hot dipped galvanised with minimum of 60 microns ionized coated and zinc dipped joint with robotic welded. the two handle frames are hinged over 100nb prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. seat & back rests are made with the lldpe bending radius to avoid sharp edges. all pipes shall be uniformly powder coated up to minimum 90 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be 750mm deep with minimum of 100mm nb dia supported with m.s. angle 25x25x4mm. poly propylene co-polymer (ppcp) and uv- stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms and to with one year warranty", tripple twister with prime pipe shall be minimum of 100mm nb dia of thickness not less than 5.00mm, standing twister plate support pipe shall be minimum of 80mm nb dia of thickness not less than 4.5mm, bottom frame support shall be minimum of 32mm nb dia of thickness not less than 3.6mm & handle ring shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade with hot dipped galvanised with minimum of 60 microns zinc dipped joint with robotic welded. the twister plate is hinged over 80nb standing pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. all pipes shall be uniformly powder coated up to minimum 90 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed for safety against entrapment, corrosion & water resistant. the foundation pipes with anchoring shall be 750mm deep with minimum of 100mm nb dia supported with m.s. angle. all plastic parts should solid poly propylene co-polymer (ppcp) and uv stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms with one year warranty, fore arm twirl double with centre pipe shall be of minimum 100mm nb dia of thickness not less than 5.00mm, support frame shall be minimum of 32mm nb dia of thickness not less than 3.6mm & tai chi spinner rings shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded with handle knobs are made from high quality nylon material. the rings are hinged over 32nb support frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. all pipes shall be uniformly powder coated up to minimum 90 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed by for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be 750mm deep with minimum of 90mm nb dia supported with m.s. angle. all plastic parts should solid poly propylene co-polymer (ppcp) and uv stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms with one year warranty, sky walker double with main frame shall be minimum of 100mm nb dia of thickness not less than 4.50mm & handle pipes shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade with hot dipped galvanised with minimum of 60 microns zinc dipped joint with robotic welded with plastic/rubber grips on top end. the handle pipes are hinged over 40nb main frame with the help of especially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e. maintenance - free ball bearing. the handle pipes shall be further extended to the 24mm nb dia on both sides. paired rectangular tubes with four foot rests are linked to main frame. foot rest shall be made of aluminium material - .. all pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be deep with minimum of 100mm nb dia supported with m.s. angle the instruction plate of size of ss 304 grade plate with with your company emblem at two sides facing to users with printing. all plastic parts should solid poly propylene co-polymer (ppcp) and uv stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms with one year warranty, maintenance for open gym equipment for extra one year, providing cement concrete sitting benches including cost and conveyaance, watering, tamping including all labour charges etc., complete as per ss and as directed by the engineer - in - charge., supply and delivery of 250mm pvc casing pipe 6 kg /cmsq (finolex/prince/sudhakar) manufacture, supply and delivery of unplasticised pvcs pipes for potable water supplies conforming to is : 4985/2000 (3rd revision) with bell ends (socket) as per specification in light grey/natural ivory grey/ any other color (except white) inclusive of transportation to the sub-divisional storesanywhere in ap excluding excise duty and sales tax etc., supply and delivery of 180mm pvc casing pipe 6 kg /cmsq (finolex/prince/sudhakar) manufacture, supply and delivery of unplasticised pvcs pipes for potable water supplies conforming to is : 4985/2000 (3rd revision) with bell ends (socket) as per specification in light grey/natural ivory grey/ any other color (except white) inclusive of transportation to the sub-divisional storesanywhere in ap excluding excise duty and sales tax etc., drilling of tube well with down the hole hammer drilling of finished dia meter of 165 mm dia in all formations of soils inclduing insertion of 180mm dia pvc casing pipe of 6kg/cm2 of isi make and providing cap as directed by the departmental officer and transporation of drilling equipment and supporting vehicle etc., complete but excluding cost of pvc casing pipe etc., complete as per ss and as directed by the departmental officers., drilling of tube well with down the hole hammer drilling of finished dia meter of 180 mm dia in all formations of soils inclduing insertion of 250mm dia pvc casing pipe of 6kg/cm2 of isi make and providing cap as directed by the departmental officer and transporation of drilling equipment and supporting vehicle etc., complete but excluding cost of pvc casing pipe etc., complete as per ss and as directed by the departmental officers., supply and transportation of 2.00 hp 25 stage three phase isi submersible motor pumpset suitable for 4" bore well. makes:kirloskar / crompton / texmo / cri / ksb/lubi including cost and conveyance of all materilas and all labour charges etc complete as per ss and as directed by the departmental officers. (elec-5.4.1), labour charges for fixing of submersible motors including cost of all materials and all charges etc complete, supply of 3 core 2.5 sqmm flat copper cable as per is694:1990 for submersible motors.makes: finolex / polycab / havells / v-guard / goldmedal / gm / million / vimal / nandicab / kundan cab/hi-tech including cost and conveyance of all materilas and all labour charges etc complete as per ss and as directed by the departmental officers. (elec-1.6.3) (elec-1.6.3), fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3hp consisting of relay, contactor, starting and running capacitors, voltmeter, ammeter, indicator lamps, mcb , on/off switch including supply and fixing of dol starter of make c&s/l&t/seimens/bch/crompton. complete.,.including cost and conveyance of all materilas and all labour charges etc complete as per ss and as directed by the departmental officers. elec-5.4.16, manufacture, supply, & delivery of hdpe pipes conforming to is 4984 - 1995 including transportation to any where in a.p, including excise duty, sale tax and specials etc., complete. p.e.100 grade 6kg/sqcm (vide page no-86/item no-1 of public health items of cssr - 63 mm diametre complete as per ss and as directed by the departmental officers., manufacture, supply, & delivery of hdpe pipes conforming to is 4984 - 1995 including transportation to any where in a.p, including excise duty, sale tax and specials etc., complete. p.e.100 grade 10kg/sqcm - 63 mm diametre complete as per ss and as directed by the departmental officers., providing independent earthing by exacavating a pit to a depth of 2.25mtr in all soils as per size specified in the data for important equipment with 2.5mtr length 40mm dia 'b' class g.i pipe and 18" dia 3" thick hume pipe ring with r.c.c. slab cover duly providing staggered holes filling with 20kg salt and 40kg charcoal or 40kg bentonite powder from the bottom of the pipe giving earth connection from electrode through g.i strip of 25 x 6mm x 200mm length to be bolted with nut bolts including supply and termination of no.8 g.i.wire from bottm of the pipe with all accessories and labour charges complete, as per is specifications 732/198 and as directed by engineer incharge, fiber casting, also known as frp (fiber reinforced plastic) sculpture, is a technique where a liquid resin is poured into a mold to create a three-d object, often a statue. the process typically involves creating a clay model, taking a rubber mold, mixing resin with chalk powder and fiber liquid, pouring the mixture into the mold, and then curing and finishing the resulting fiber sculpture and including cost and conveyance of all materilas and all labour charges etc., complete as per ss and as instructed by the departmental engineer - in charge.(rabbits ,dears, budha statues ), making inauguration arrangements including cost of plaque and its fixing , chairs, shamiyanas, gralands and puja samagri and water bottles etc., operations complets as per ss.
Tender247 tries to ensure accurate & authentic tender information at its level best however it cannot be held responsible for Omissions, Errors, etc. Users are advised to refer to Tender Document published by Procuring entity before participating / submitting bid.
LOADING...
