supply of construction materials and provision of equipment - ghaila/kankar/jhajhra, mud mortar/mud mix, kiln lime for masonry work, cement (ppc, white cement), fine aggregate, sand/gravel, local gravel, fly ash, surkhi, stone dust (for masonry), stone/brick ballast (excluding road work), 40mm stone ballast (hand-broken; voids deduction 1/11), 40mm stone grit (crusher-broken; voids deduction 1/11), 20mm stone grit (crusher-broken), 12/10/6mm stone grit (crusher-broken), brick ballast, road const

Zilla Parishad has invited bids for the supply of construction materials and provision of equipment - ghaila/kankar/jhajhra, mud mortar/mud mix, kiln lime for masonry work, cement (ppc, white cement), fine aggregate, sand/gravel, local gravel, fly ash, surkhi, stone dust (for masonry), stone/brick ballast (excluding road work), 40mm stone ballast (hand-broken; voids deduction 1/11), 40mm stone grit (crusher-broken; voids deduction 1/11), 20mm stone grit (crusher-broken), 12/10/6mm stone grit (crusher-broken), brick ballast, road construction materials (including 5 km lead), 63-40mm crusher-broken stone aggregate (voids deduction 1/11), 63-40mm hand-broken stone aggregate (voids deduction 1/11), 90-45mm hand-broken stone aggregate (voids deduction 1/11), quarry rubbish (voids deduction 1/6), yeval (voids deduction 1/6), kankar (voids deduction 1/6), binding material (p14-6) (voids deduction 1/6), bricks (22.5 x 11 x 7.50 cm: 1st class, 2nd class), soling/kharanja/masonry stone, random rubble (rr) masonry, coursed rubble (cr) masonry, kharanja soling (up to 15cm height for flooring), kharanja soling (23cm height for road kharanja work), jodhpur-type stone slabs/strips/pieces (length 2-3'), width 10-12", thickness 2.5-3.5"), stone chips (flaky material) (3-4" thick; length & width 1-2"), sandstone (for dpc, sill, coping, lintel, shelf/tand, cupboard base, etc.): thicknesses up to 25mm, 25-40mm, 40-50mm, 50-75mm, 75-100mm, 100-150mm; flooring/paving stone slabs (katla): flooring slabs up to 35mm thick (min. area 3 sq. ft.), paving slabs 60-75mm thick (min. area 3 sq. ft.); unpolished rough kota stone: up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm; polished kota stone (single-side polished): up to 900 sq. cm, 901 to 2300 sq. cm, above 2300 sq. cm; marble stone (makrana 'adanga' 20mm thick): 901 to 2300 sq. cm, up to 900 sq. cm, above 2300 sq. cm; marble chips, marble powder; marble stone (rajnagar grade ii/local, 20mm thick): 901 to 2300 sq. cm, up to 900 sq. cm, above 2300 sq. cm; stone door frames: single rebate size 100 x 75 mm, double rebate size 125 x 75 mm; stone slabs/strips: length up to 1.5 m (min. 40mm thick), length 1.5 m to 2.40 m (min. 50mm thick). length 2.4 m to 3.0 m (min. 65 mm thick); length above 3.0 m (min. 75 mm thick); precast tiles/blocks: glazed (30x45 cm), mosaic (40 mm thick), vitrified (60x60 cm); interlocking tiles/bricks/blocks for roadwork (m-30 grade: 60 mm, 80 mm, and 100 mm thick); fr pvc-insulated copper conductor single-core cable (isi marked): 0.50, 1.00, 1.50, 2.50, 4.00, and 6.00 sq. mm; local wood with fittings (for doors, windows, and furniture): mango, babool, others; factory-made doors (30 mm thick, solid core, single shutter); structural steel/iron (tor steel fe 415/500 for reinforcement); binding wire (18 gauge); girders; angle iron/square bar/flat strip; barbed wire (various gauge combinations); mesh/iron mesh (24 gauge, 14 mesh); cement concrete jali (40 mm thick); glass (3 mm thick); paints/colors: enamel paint, distemper (water-bound), lime for whitewashing (aras/kali), primer (for iron/wood); petroleum products: diesel (hsd), mobil oil, bitumen; shalitex board (25 mm thick). plain sheet, g.i. sheet 22 gauge (0.80 mm), g.i. sheet 24 gauge (0.63 mm), m.s. sheet 22 gauge (0.80 mm), m.s. sheet 24 gauge (0.63 mm), corrugated sheet, g.i. sheet (various thicknesses), asbestos cement sheet 6mm (2.5/2.75 x 1m), other sheets, pvc sheet 1mm thick (colored/plain), green/yellow 'lite-roof expo' sheet (183 x 90); pipes: g.i. 15mm diameter (class b), g.i. 20mm diameter (class b), g.i. 25mm diameter (class b), a.c. 75mm diameter, a.c. 100mm diameter, pvc 90mm diameter (with ring), pvc 110mm diameter (with ring), pvc 140mm diameter (with ring), pvc 110mm (2.5 kg/sq. cm) with coupler; sanitaryware: indian w.c., orissa w.c., european w.c., footrest, ceramic lipped urinal (430x350x300mm) with coupling, bracket, and pvc waste pipe, wash-basin (450x300mm) with coupling, bracket, and pvc waste pipe, stoneware (s.w.) pipe 100mm. m.m. vyas, 0.6 m long, cp pillar cock (15 mm dia) (is mark), cp bib cock (15 mm dia) (is mark), 125 mm dia cp grating, rcc np3 hume pipe with collar (1200 mm, 1000 mm, 750 mm, 600 mm, 450 mm, and 300 mm diameters), isi-marked steel conduit (20 mm and 25 mm dia), charcoal, pvc water tank with cover (conforming to is:12701-1989), 13/0.20 mm twin-core pvc-sheathed flat flexible copper cable, steel fastener (6 mm x 75 mm), isi-marked pvc conduit (25 mm and 20 mm dia), junction box (20 mm two-way, 20 mm one-way, 25 mm two-way, 20 mm. pvc boxes, modular gi boxes (for 3 modules, for 2 modules), modular base and cover plates (for 2 modules, for 3 modules), modular switches (one-way, isi marked, sp 15/16 amp, sp 5/6 amp), modular socket outlets (isi marked, 3-pin 5/6 amp, 6-pin 15/16 amp), mcb dbs (2+2 way spn single door, 2+4 way spn single door, 2+6 way spn single door), gi pipes (medium grade, 15.00 mm diameter, 40.00 mm). diameter, copper wire 8 swg (4.00 mm diameter) (0.117 kg/m), ci/ms cover plate with locking mechanism attached to the frame, close graded gsb material as per table 400.a, aggregates 45 mm to 2.8 mm, aggregates 6 mm nominal size, stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve, cost of water, cess, diesel road roller (8 to 10 tonnes), sheep-foot roller, truck (9 tonnes), tractor (25-40 hp), tractor trolley, tractor water tanker (4000-liter capacity), cement concrete mixer (5-7 cubic feet), pumping set (15 hp), needle/plate vibrator with operator, camel cart/bullock cart with driver, grinding machine with operator (large, motor-driven), compressor, hydraulic excavator/jcb (bucket capacity 0.4 cum), dumper, scraper, wooden plank shuttering (including props/ballies and other materials/transport), installation at site and removal after the stipulated period, plywood shuttering (including props/ballies and other materials/transport), installation at site and removal after the stipulated period, iron plate shuttering (including props/ballies and other materials/transport), installation at site and removal after the stipulated period, water and pumping expenses (filling), grinding machine with operator (small, hand-operated), iron mould for well (diameter as specified, height 75 cm) including transport, installation at site and removal after the stipulated period, work of clearing lantana bushes (density 0.4 to 0.8) by initially cutting with an axe, uprooting roots using a monkey jack and pickaxe, in forest areas. cleaning fire lines; gathering and burning cleared brushwood/shrubs; removing dry bamboo; general clearing; placing stones at the base and adding soil (for loose-stone semi-circular structures: minimum average base width 30 cm, average height 20 cm, length 2.50 m); procuring seedling preparation materials and soil/manure (leaf mold/farmyard manure); marking (staking) for trenches; digging contour trenches (45 cm x 45 cm) or v-ditches (dimensions: top width 2 m, bottom width 1.20 m, depth 0.30 m; continuous or staggered) and forming a mound on the downslope side using excavated soil (separated from pebbles/stones); handling various soil types (sandy loam, clay loam, hard clay with up to 20% boulders, hard clay with >20% boulders, hard soil with high gravel/murrum content); marking for pit digging (sizes: 0.45x0.45x0.45 m or trapezoidal equivalent); handling various soil types (compacted sandy soil, sandy loam, clay loam, hard clay with up to 20% boulders, hard clay with >20% boulders, hard soil with high gravel/murrum content); treating pits with insecticide; planting (soaking the bagged seedling in treated water, cutting the polythene bag, removing the seedling, planting it after clearing debris/stones, refilling and compacting soil around it) in flat or hilly terrain; using 12 cm size bags. ...x 30 cm, bag size 20 cm x 40 cm; in hilly areas: bag size 12 cm x 30 cm, bag size 20 cm x 40 cm; procurement of saplings; bag size 12 cm x 30 cm, bag size 20 cm x 40 cm; initial cutting of lantana bushes (density 0.4 to 0.8) with an axe, followed by uprooting roots using a 'monkey jack' and pickaxe; clearing fire safety strips in forest areas, gathering bushes into piles, and burning the piles; removal of dry bamboo and general clearing; placing stones at the base and filling with soil (for 'loose stone semi-circular structures': minimum average width 30 cm, average height 20 cm, and length 2.50 m); cultivator; wet mix plant (75-tonne/hour capacity); 250 kva generator; water tanker (6 kl capacity, 5 km lead, one trip/hour); front-end loader (1 cubic meter bucket capacity); tipper (10-tonne capacity); add 10% to carriage cost to cover loading and unloading; motor grader (110 hp); vibratory roller (8-10 tonne); skilled artisan, binder (strip layer), wireman, artisan-helper/electrician/plumber/carpenter; unskilled laborer (for rd schemes); unskilled laborer (for egs schemes); mate (for rd schemes); mate (for egs schemes); 125 mm [bore] up to a depth of 100 meters in all types of rocky terrain. drilling the borewell (handpump), installing the casing pipe (cost of casing pipe not included), removing all overburden, and completing the work to obtain water (including sand-laden water); supply of an india mark-ii handpump (complete with cylinder and 15 connecting rodsisi marked); supply and installation of 32 mm diameter medium-class isi-marked gi pipes (3-meter lengths) along with all accessories and fittings; supply of isi-marked ms pipes (125 mm diameter) with sockets; construction of a platform with a 185 cm diameter in accordance with unicef-approved designs and drawings; and installation of the india mark-ii handpump on the previously constructed platform for the financial year 2026-27 for various schemes implemented by the department of rural development and panchayati raj. The estimated project cost is ₹0.6 Cr. Please refer to the tender document for EMD details. Please refer to the tender document for the bid submission deadline, with the technical opening scheduled for 29 September 2026.