162+ Latest Ankle Or Foot Orthopedic Softgoods Tenders

Tender247 Lists Ankle Or Foot Orthopedic Softgoods Tenders As Soon As They Are Published, Covering Requirements From Government Offices, Psus, And Private Companies For Ankle Or Foot Orthopedic Softgoods. Tenders In This Category Typically Specify Quantity, Brand Or Generic Equivalence, Shelf Life, And Compliance With Cdsco, Indian Pharmacopoeia (Ip), Or Bis Standards As Applicable. Anyone Looking For The Latest Ankle Or Foot Orthopedic Softgoods Tender Notifications Can Rely On Tender247'S Dedicated Category Listing, Sourced Directly From Official E-Procurement Portals. Listings For Ankle Or Foot Orthopedic Softgoods Are Updated With Tender Status (Live, Closed, Or Awarded) And A Direct Link To The Full Tender Document. Track Ankle Or Foot Orthopedic Softgoods Tenders On Tender247 And Set Up Custom Alerts By Buyer Or Location To Stay Ahead Of The Competition.

Live Ankle Or Foot Orthopedic Softgoods Tenders 2026

141 |Bid Value:₹ 29.60 Cr. |EMD:₹ 30.00 Lakh |18-09-2026 1 Day Left |T247 ID-103372321

corrigendum : supply of orthopedics department medical equipment turnkey project - moduler icu, robotic system , orthopedic ot table with attachments, accessories to be provided with ot table configuration with each table, remote control, upper back section with pad, head section double joint with pad, leg section two-part with spread with pad, pad for head positioning, anesthesia screen with radial clamp, body strap rotatable, arm support with pads, orthopedic accessories, extension adapter, universal support, rectangle shape supporting pad universal, counter traction post 150, double joint strut, pair, extension strut medium, adapter spindle traction mechanism, spindle traction mechanism, traction boot, docking trolley for extension unit, rail clamp for extension strut, clamp basic, side rail extension, clamp radial setting, base support, tibia accessories, counter traction post for tibia, adapter counter traction post pivoted, counter traction post 60, condylen fixation device, leather extension sandal right, leather extension sandal left, hip endo prosthesis, universal lateral support height adjustable with back, buttocks & pubic, support (1 each- total 3 supports), tunnel pillow ii, femur in lateral position, counter traction post for femur, arm holder for lateral position with radial clamp, hand operating table, hand operating table, traction device for humerus, counter traction for humerus, weinberger hand traction device, arthroscopy knee accessories, arthroscopy positioning device basic, clamp radial setting, meniscus positioning device, anaesthesia workstation, high speed ortho drill system, suction machine, electro cautery machine, shoulder traction device, orthopaedic instrument set, artery forceps straight, artery forceps curved, mayo, jaws, haeger needle holder with tungsten carbide, dietrich/ryder needle holder with tungsten carbide, jaws, kocher artery forceps straight, mcindoe forceps (plain), mcindoe forceps (tooth), tooth forceps with tungsten carbide, jaws, mosquito forceps curved, allies tissue forceps with tungsten carbide jaws, mayo scissors curved with tungsten, carbide jaws, mixter right angled artery forceps, bp handle size no 4, bp handle size no 7, mosquito artery forceps, kilner scissor, pituitary forceps straight, pituitary forceps. curved anterior, verbrugge self centering bone holding, forceps for forearm bone, verbrugge self centering bone holding, forceps for femur, forceps, action, double action bone cutter (large), farabeuf periosteal elevator, cannulated screw driver 4.5mm long, cannulated screw driver 3.5mm, teflon punch for hra, screw driver 4.5mm (hexagonal), depth gauge for small fragement ss, depth gauge for large fragement ss, wire passer, wire cutterwire twister, reduction forceps, reduction forceps, reduction forceps, reduction forceps, done reduction forceps with point, bone reduction forceps with point, bone reduction forceps with point, retractor short narrow tip small, retractor long narrow tip (for hip, surgery), osteotome with fiber handle, straight, osteotome with fiber handle, curved, osteotome with fiber handle, straight, osteotome with fiber handle, curved, osteotome with fiber handle, straight, osteotome with fiber handle, curved, osteotome with fiber handle, straight, osteotome with fiber handle, cury, osteotome with fiber handle, straight, osteotome with fiber handle, curved, osteotome with fiber handle, straight, osteotome with fiber handle, curved, osteotome with fiber handle, straight, osteotome with fiber handle, curved, chisel with fibre handle, straight, chisel with fiber handle, curved, chisel with fibre handle, straight, chisel with fiber handle, curved, chisel with fibre handle, straight, chisel with fiber handle, curved, chisel with fibre handle, straight, chisel with fiber handle, curved, chisel with fibre handle, straight, chisel with fiber handle, curved, chisel with fibre handle, straight, chisel with fiber handle, curved, chisel with fibre handle, straight, chisel with fiber handle, curved, hammer with fiber handle, t-handle with chuck, bone hook, periosteal elevator with fiber handle, curved st. edge, width, periosteal elevator with fiber handle, curved round edge, gouge with fiber handle, curved, gouge with fiber handle, curved, gouge with fiber handle, curved, gouge with fiber handle, curved, gouge with fiber handle, curved, gouge with fiber handle, curved, gouge with fiber handle, curved, gouge with fiber handle, curved, gouge with fiber handle, curved, plaster cutting saw- electric, lorenz plaster shears, galpie retractors, galpie retractors, galpie retractors, mastoid self retaining retractors, mastoid self retaining retractors, mastoid self retaining retractors, ss scale, ss scale, screw holding forceps, screw holding forceps, harrington rod pin cutter, pin cutter, k wire cutter, cannulated tap, cannulated screw driver, screw driver 3.5mm (hexagonal), murphy skid, putty rasp, nylon face impactor, k nail extractor with 4 hooks, t-handle with quick coupling, flat nosed pliers parallel tip, plier cum wire bender cum wire cutter, plier cum wire bender cum wire cutter, bone awl, k wire bender, bandage cutting scissor, cobra retractor for hip surgery, bone plate bender, self centering bone holding forceps, reduction forceps-serrated-speed lock, bone file, bone currette (scoop), bone currette (scoop), volkmann bone curette, double ended, mallet, mallet, mallet, hohman retractor, hohman retractor, hohman retractor, dressing scissor, dressing scissor, mayo scissor, mayo scissor, mayo scissor, stitch removal scissor, perforated sterilization box, stainless, steel, sterilization drum, stainless steel, surgical instrument tray, stainless steel for ortho, instruments, plain forceps, plain forceps, sponge holding forceps, towel clip, towel forceps, skin hook, ilizarov wire tensioner, periorticular reduction forceps, ball, tipped- large fragments, bristow periosteal elevator, verbrugge-muller bone lever 65 mm wide, humeral head retractor, midi lambotte osteotome, liston bone cutter- 7.5in straight, broken screw retriever, broken screw retriever, broken screw retriever

Mumbai, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
142 |Bid Value:₹ 9.00 Cr. |EMD:₹ 18.00 Lakh |13-10-2026 26 Days Left|T247 ID-103431505

corrigendum : supply of neurosurgery implant - "anterior cervical plating system non variable angle screws system., * profile of the plate must be 1.8-2mm 2 5, * width of the plate should be 16-17.5mm, * must be commercial pure medical grade titanium, * must have convergence of 30 degree, * cranial screw angulation must be 6 degree, * screw must be available from 12mm to 18mm length, self tapping and self drilling options, * the system must have the option for fixed and variable angle screw guide which may work as plate holder too., * locking mechanism of the screw must be on mono cortical with locking head expansion screw mechanism/ one step locking with elgiloy clip the plate must be available in following sizes", cervical plate level 1st, cervical plate level 2nd, cervical plate level 3rd, cervical plate level 4th, "variable angle screw system, * a single plate must provide the option of rigid, toggling and hybrid construct., * the cephalad/caudal angulation must be of approx. 28 degree. with 8degree of. offset, * the lateral/medial angulation range must be of 14 degree with 7 degree of offset., * locking mechanism of the screw must be one step locking with elgiloy clip should block the screws from coming out., * the plate must be 1.8 -2.5mm in thickness and 16-17.5 mm in width, * the core diameter of the screws must be 3mm with outer diameter being 4.0mm and 4.5mm and self drilling, ""* the plates must be available in following sizes: one level plates 22.6_34.6 mm, two level plates 36.6 54.6mm three level plates 53.6_77.6mm and four level plates"", the plate us be available in folowing sizes", cervical plate level - 1, cervical plate level - 2, cervical plate level - 3, cervical plate level 4, "anterior cervical interbody fusion device with screw mechanism, * the implant should act as standalone interbody fusion device for cervical spine with the benefits of an interbody spacer and an anterior cervical spine., * the implant must be a combination of peek/titanium must automatically align when inserted, ""* the implant must have radio opaque marker for posterior and anterior visualization during imaging and teeth on superior and anterior surface for initial stability"", * spacer component must be made of peek/ titanium, ""* the implant must have on one step locking screw and screw loading wire should from a bone wedge with 40 + 5 cranial/caudal angle with 2.5 medial and lateral angle."", * the screw must come with self-tapping or self-drilling and self-centering options with titanium alloy material, * the screw must come in 3.0mm to 4.5mm diameter & must be colour coded by screw lengths varying from 12-20mm., * the implants must come in parallel lordotic and convex implants sets with heights varying from 5mm to 12mm with an increment of imm each., * should have option for 2-4 screws", "cv junction fixation system (occiput to c2), * the system should be versatile., * the system should have medial and lateral plates of 50 & 60mm, one & two hole, * clamps which must allow the medial and lateral rod placement, and should be able to give, * the system must have straight and pre contoured 3.5mm rods,, * the system must have c2 screw 3.5 mm with 4mm rescue screws., * the system should have blunt 4.5mm occipital screws and 5mm emergency screws with 4-18mm lengths all compatible with, * the system must have the templates of occipital plates to avoid wrong plate selection., * the system should have simple locking mechanism of set screws, * the system should have tap for better screw purchase and 2mm torque limiting screw driver for final tightening., * following component should be available in system", a) occipital plate, b) occipital clamp single hole, c) occipital clamp double hole, d) bone screw, e) polyaxial screw with locking cap, f) rod, g) transverse connector, h) tapered rod, "top loading implant system for posterior stabilization of the cervical spine., * the system should be top loading for the posterior stabilization of the cervical and upper thoracic spine, * the system should have cancellous & cortex bone screws. (titanium), * the system should have locking screws for angularly stable locking and fixation of the rod. (titanium), * the system must have self-tapping screws., * the system must have 3.5mm titanium rod., * the system should have oc fusion option., * the system should offer hooks., * the system should have cancellous profile bone screws: 3.5mm: 8mm - 50 mm (2 mm increments) 4.0mm : 8mm - 50 mm (2 mm increments) 4.5mm: 8mm - 50 mm (2 mm increments), * the system should have cortical profile bone screws: 3.5mm : 28 mm - 50mm (2 mm increments), * the system should have screw head profile: height = 1 mm and reduction screw 22mm height, * the system should have rod run = 9mm, * the system should have shaft screws (cortical profile):3.5 mm: 22mm - 36mm (2 mm increments), *shaft screws should have 10mm unthreaded portion, *rods must be of the following specifications: 3.5mm ti rod: 80 mm, 120 mm and 240 mm lengths 3.5mm /5.0mm ti rod, 120 mm /170 mm, 3.5mm /6.0mm ti rod, 120 mm /170 mm, * the system should have transconnector: 60mm and 75mm, * the system should have short and long/left and right hooks, * the system should have 3.5mm ti transverse bar, * the system should have occipital plate/rods options. system should have following components", a) polyaxial screw with locking cap, b) rod, c) transverse connector, d) cervical hook, "disc prosthesis for cervical spine, * superior and inferior implant plate made of cobalt - chromium - molybdenum/titanium alloy according iso 5832-12, * plasma - sprayed titanium coating, ti according iso s832- 2, * inlay made of ultra - high molecular weight polyethylene (uhmwpe), * ball and socket principle_ metal on polymer/metal., * modular anatomical design, -optimal primary stability due to h keel anchorage of the prosthesis in the vertebral body., -anatomical footprint design for maximum endplate coverage, * six different footprints available for optimal coverage of the vertebral end plate: m, md, l, ld, xl, xld, * three different heights (5,6, and 7mm) allowing adjustment to the individual dimensions of the patients disc.", "anterior cervical interbody fusion device., * the implant should act as standalone interbody fusion device for cervical spine with the benefits of an interbody spacer and an anterior cervical plate., * the implant must be a combination of plate and spacer wherein the plate must automatically align when inserted., * the implant must have radio opaque marker for posterior visualization during imaging teeth on superior and anterior surface for initial stability., * spacer component must be made of peek optima (polyetheretherketone), * the implant must have one step locking screw and screws should form a bone wedge with 40*- 5' cranial/caudal angle with 2.5 degree medial lateral angle., * the screw must come with self-tapping and self-centering/drilling option, with titanium alloy material (ti-6ai-7nb), * the screws must come in 3.0mm to 4.5mm diameter & must be colour coded by screw length varying from 12mm to 18mm., * implant's triobular thread cutting flutes should be self centering., *the implants must come in parallel lordotic and convex implant sets with heights varying from 5mm to 12mm with an increment of 1mm each.", "expandable corpectomy cages., * expandable vertebral body replacements., * for cervical & upper thoracic spine., * should have ratchet system so that desired height can be achieved., * should achieve height from 17mm to 70mm & angle from 4.5 to 7 degree", "expandable titanium cage with footprint, * should be made up of medical approved good quality titanium., * foot print size - 12x/4mm,21x23mm, 25x 32mm, * expanding height range from 15-89 mm for cervical 24-70 mm f o r thoracic 29- 119 for lumber, * one instrument to insert and expand the implant, * it should have smooth in situ continuous expansion, * captured locking screw, * multiple insertion angles to accommodate various approaches, * should have window for post insertion bone graft packing, * large open canal for bone graft material", titanium mesh cage for vertebral body replacement per mm.10-12-15mm diameter, a) for cervical round / oval, b) thoraco / lumber-round /oval, "sublaminar titanium cable system, * the cable should be made of multiple strands of titanium to enable better grip over tissues. it should be available 1mm diameter, lengh should be 18.25-22 inch ., * the individual packaging should be available in double cable and single cable individual sterilized packaging., * it should be malleable with crimp., * it should withstand twisting and knotting without loosing its tensile strength., * it should have a built in crimp to enable fixation without having to tie a knot and have optimal tension after fixation., * i t should be of medical grade titanium and should be artefact free on mri and ct.", a) titanium double cable with integral crimp - 10 nos., b) titanium single cable with integral crimp - 25 nos., "cage and titanium staples for anterior fixation, * titanium mesh cage system for management of cervical & thoraco-lumbar burst fractures and tumors that permits anterior load sharing, allows for distraction to perform reduction and compression of the bone graft., * should have anterior staples for 13/15, * should have titanium mesh cages for the cervical, thoracic, lumbar and interbody fusion., * cervical cages 10 x 70mm, 13x70mm, 10x100mm - 15 each, * thoracic cages 13x30mm, 16x30mm, 16x60mm - 15 each, * lumbar cages 19x40mm, 19x 90mm, 13x10mm - 15 each, * kidney/bullet shaped cages for tlif - 15 each, * anterior staples for 13 & 15mm - 15 each anterior double rod staples 21,23,25mm -should have", a) single hole staples, b) double hole staples, "poly ether-ether ketone (peek) spacer for cervical spine, * spacer shouid be made of radiolucent poly ether - ether ketone., * should be designed for use with open, mini and endoscopic technique., * should have space for filling the bone graft., * should be of anatomical design to fit the cervical spine., * should be available in various sizes., * should have radio opaque marker to identify the location of the spacer at the time of placement", "odontoid screw, * screw should made up of tianium alloy (tan)., * screw should be cannulated, * screw should be self-drilling., * screw should consist of 12mm short thread, * screw should be of 3.5mm diameter., * screw should be available in the length of 36mm to 50mm. the whole system should thus enable the following. help in preservation of alantoaxial mobility with lag screw compression technique., with wire guiding ensures precise positioning of implants & instruments.", "c1 - c2 transarticular screw, * screw should made up of titanium alloy (tan), * screw should be self-tapping cortex screw., * screw should be of 3.5mm diameter., * screw should be available in the length of 30mm to 60mm., * screw should consist of threaded socket in screw head", "c1 -c2 spacer, * joint spacer size 3.5 mm, 4.5mm, 5mm, 6mm, * joint spacer made up of titanium, * should be tapered in the front and there should be able to attach to the instrument for insertion", "side opening pedicle screw system, * the system must have side opning pedicle screws and hooks for posterior fixation of spine., * the system should be compatible with shantz screw, hooks, clamps, side opening pedicle screw and variable axis screw, * the side loading pedicle screw should be available in 5,6 & 7mm diameter with varying length available in 30mm to 60mm with 5mm increment., * the system must have side opening right & left lamina and pedicle hooks.", "top loading pedicle screw system, * top loading preassembled polyaxial pedicle screw with dual core, titanium alloy tan (ti a16 n7) with following specification and colour coding: diameter 4mm to 8mm, lengths 20mm to 100mm, * angulations of the screw head of 25 to 50 degree in all direction., * 3.5mm hexagonal locking cap based on titanium break off plug locking mechanism., * two step locking mechanism with initial locking with locking cap and final locking with blue set screw, * the option of achieving case specific lordotic and parallel compression with the same system., * curved rods in 6mm diameter from 45mm to 85mm in the increments of 5mm straight rod in 6mm diameter from 50mm to 150mm system shouid have following parts.", a) polyaxial screw, b) monoaxial screw, c) hook, d) rod, e) transvers connector, f) reduction screw, "transformaminal lumbar interbody fusion. (tlif), * the cage must be radiolucent made up of peek - optima material with sharp teeth designed for transformational lumbar interbody fusion (tlif), * the cages must have rounded tapering edges/kidney shape allowing easy insertion thus minimizing injuries to endplates and neural structures., * the cage should be able to move upto 80 degree after attaching with one key instrument., * the cage must have 3 titanium markers (two lateral, one central) to indicate the cage position on x ray., * the cages must have injection moulded roughened surface promoting bone integration and ongrowth., * the cages must have biconvex shape providing even distribution of compressive forces along the endplates thus stability., * the cages must have one broad graft hole and two lateral holes., * the cages must be pre filled with chromos, synthetic bone graft., * implants must be available in two footprint sizes 10x27mm and are available as sterile packed., * the available implant heights must be 7mm,8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 15mm, 17mm,", "posterior lumber interbody fusion plif., * the system should be able to provide:, adequate stability restores disc height restores lordosis, preserves the integrity of the vertebral body endplates provides an optimized fusion bed., * interbody fusion cage system of implants and instruments for posterior lumbar interbody fusion (plif), * cage must be made of peek material preferably radiolucent., * cage must have two x-ray markers integrated into the cages to enable easy visualization of their position postoperatively., * peek material used must contain no carbon fibers, thereby reducing the risk of systemic uptake and local inflammatory response., * cages must be available in 6 heights in 2mm increments, and should be supplied sterile pre-packed., * the optimal anatomical shape and supportive superior and inferior surface design of the cage should reduces the risk of subsidence into the adjacent vertebrae., * the cage should have perforated structure which must allows for bony ingrowth through the cage, and the design must ensures optimal implant-to-endplate contact, * cage must be designed for an optimal fit into the natural concavity between t w o adjacent vertebral bodies., * cage must have teeth on the superior and inferior surfaces providing additional primary stability., * the cage must be injection moulded peek cage so that it has roughened surface, which is superior to a machined peek surface in that it promotes bone integration and ongrowth.", "anterior stabilization of thoraco-lumbar spine, * the implant should provide anterior stabilization to thoracolumber spine., * the implant should provide the benefit of palte and rod construct and be designed to be used along with either bone graft or with a vertebral body replacement., * the implant should come with instruments which are designed for use in open, minimal-open or endoscopically assisted approaches., * the implant should come with telescopic mechanism with the facility of in situ compression and distraction., * the implants should come in the following sizes: mono-segmental: 29-33mm, 31-37mm, 35-45mm, 41-57mm, bi-segmental: 53-71 mm, 66-86mm, * height of the implant above bone without posterior locking screws should be 7.7mm and with posterior locking screws should be 9.0mm and convergence of screws should be of 7.0, * the posterior screws should be of 7.0mm diameter, cannulated for use with k-wire, dual core and double lead., * the implants should come with polyaxial bushings which allow an angulations of +15 for screw insertion tailored to the individual anatomical situation.", "artificial lumbar disc, * should be two piece design metal on metal construct with both options for true anteriorand oblique insertion., * should be made available in all the 3 sizes small, medium and large and 10,12,14mm in height., * should have butterfly shaped device for intervertebral assisted with motion with silicon bumper in polyester jacket 8mm. 10mm. 12mm. 14mm", "kyphoplasty and vertebroplasty kit, * the kit should be pre-sterile., * should have working cannulas with inner diameter 3.2mm or less outer diameter 4.2mm or more with calibration along with cannulated obturator., * should have calibrated drill with cm/mm marking on proximal end., * should have digital battery operated inflation syringe to inflate balloon showing pressure in psi & atm, inflation time and volume of cavity created in vertebral body., * the inflatable balloon tamps size - 10/3,15/3,20/, (either size) should be capable to bear pressure of 400 psi or more to elevate vertebral body., * the bone filling device should be calibrated and should contain minimum 1.5cc of volume., * should have curette for scrapping bone in old v c with variable angles 30,60,90 degree to create cavity in vertebral body., * the biopsy needle should have cm marking on proximal side to take adequate bone biopsy., * minimally invasive, percutaneous, balloon kyphoplasty system for stabilizing vcfs, * anerior radio-opaque marker on balloon tamp should mark the anterior edge of the balloon., * system components should be available individually as well as in kit form including the following instruments., * should be supplied with green high viscosity vtp cement., * kit should have the following:, * 2 units of 11 gauge bone access needle, * 1 introducer kit including, * introducer with extra cannula, * drill with drill tip, * at least 4 guide pins, * 2 balloon tamps, * 2 digital balloon inflators, * 6 bone filler", a) kyphoplasty set, b) vertebroplasty set, "multilevel percutaneous pedicle screw fixation for thoraco lumbo - sacral fixation., * the system should be available for demonstration as per the requirement of user department., * the firms quoting should supply all above items, * minimally invasive multilevel percutaneous pedicle screw fixation system for thoracic as well lumbar fixation with capability of putting at least 8 screws percutaneously., * compatible with separate incision technique for screws and rods., * the system should have capability of trauma, degenerative and deformity correction percutaneously., * system should have straight rod and it should have straight and prebended (lordosed and kyphosed) as per the anatomy of thoracic and lumber., * system should have the user friendly instruments. sysem should have steerable rod inserter and reduction screw extenders., * the reduction screw extender should have large window at the base of the screw extenders., * extenders should have capability of step wise reducing the rod on to the saddle of the screw, * system should have cannulated instruments for ease of working on guide wires, * screw sleeves should have specific markers which enable surgeons to understand the reduction capabilities., * system should have free hand rod inserter instrument., * system should have for measuring and rod confirmation tool which help surgeon to check the insertion of the rods on to the screws percutaneously., * system should provide unique method of compression and distraction, rod approximation and rod rotation (through the percutaneous route), * system should allow gradual dilation to minimize muscle trauma, fascia disruption and blood loss., * system should be compatible with both mono and multi axial screws capabilities., * the screws should have reverse threaded technology to reduce pullout strength, * the implant should have top loading, top tightening and most importantly reverse thread technology with breakoff plugs., * system should have cannulated mono and multi-axial screws with angulation of 28 degree and should be available in self tapping screws 4.5,5.5,6.5,7.5mm diameter and length 25mm -60mm at the increment of 5mm, * should be compatible for use with fenestrated screws for augmenting vertebral bodies with cement., * system should be compatible with 5.5mm rod, * system should work with jamshedi needle. system should have following component", a) pedicle screw, b) rod, "hydroxyapetite (ha) coated pedicle screws, * hydroxyapetite coated open ended reverse thread top loading top tighening fixed angle pedicular screws (assorted size) 4.5mm, 5.5mm, 6.5mm with length 30mm-50mm at the increment of 5mm with break off type of plug with g4 reverse thread technology, * hydroxyapetite coated open ended reverse thread top loading top tightening multi-axial pedicular screws (assorted size) 4.5mm, 5.5mm, 6.5mm and should be available in length 30mm-50mm at increment of 5mm., * compatible with vetebreal coloum manipulation and vertebral body rotation instruments for deformity correction., * universal system can be use anterior as well as posterior tl spine, * should ideally be use for osteoporotic vertebra/bore, * osteofill surface area of the screws threads should be coated with hydroxyapetite material., * should be available in pre-sterile packs., * all the implants must be registered with dgci. system should be available in following component", a) pedicle screw, b) rod, c) transverse connector, "laminar hook with rood -, should be made up to titanium / mri compatible material and of different size and angles with two rods and screw., * system should be available in following component", a) pedicle screw, b) rod, c) transverse connector, "mini plates & screws, * a plating system to offer neurosurgeons a choice do rigid fixations of craniotomies and other cranial procedures which should be very low profile in nature and be a complete system for a broad spectrum of cranial indications having following specifications technically -, * a modular system having autoclave able module for instruments and implants, * al plates are should be 0.5mm thick and implants should be offered in various shapes for an optimal and appropriate choice in the procedure these should include basic plates, frame plates, adaption plates-available in multi holes, burr hole covers, burr hole covers for shunt and mesh plates in various dimensions (both 0.4mm & 0.6mm should be available), * temporal & mastoid region should have dedicated plates for use, * screw plate profile should be not more than 0.6mm for minimum palpability, * despite the minimum profile, the plate strength should be comparable to thicker cranial plates, * the screws should be designed for hard cranial bones and should have a plus drive recss for excellent screw retention in the shaft, * the screws should have a flat head and should be easy to pick up with a self holding, * the screws should have a selection in self-drilling and self-tapping types, * screw lengths should be available in 3-6mm, * emergency screws having different color than regular screws, * the screwdriver handle with hexagonal coupling long (66mm) and short (42mm) shafts which should be self holding in nature and compatible with all screws in the system and also fit the handle instantly, * holding instrument for plates must be a part of the instrumentation, * a special cutter for strut & mesh plates to be provided in the system, * appropriate 1.3mm drill bits of 4mm & 6mm depth having stops appropriate label clips for the screws which should be replaceable.", "plates for cranial fixations., * a clamps system for rigid fixation of craniotomies, * should be easy and quick handling as well as very low profile in nature, * should consist of a lower and an upper plate. the upper plate should have optimal, preferably, a clover leaf design and shall be moveable upwards and downwards along a central tube., * the lower plate should rigidly fix to the lower end of the tube., * the clamps should be offered in diameters of 13mm to 22mm enabling putting of the desired craniotomy gap, covering burr-holes and for large gaps between the flap and the skull and also for very large burr holes., * the clamps should be made of pure titanium which does not provide any risks ot patients undergoing mr imaging procedures with mr systems of 1.5 t or less., * there should be no magnetic field attraction, heating is minor, and artifacts involve a relatively small signal void comparable to that of titanium plates", "cranial fixation system, * designed to assure the structural stability of the replaced skull flap following a required craniotomy procedure., * should have screw less fixation system, * should have good closure strength, * should be radiolucent - permanent locks should provide ct and mr compatibility, resulting in enhanced image clarity, * adaptable - should have polymer material and design combine to augment ability of locks to contour to the anatomy, * fast - should have four simple steps require to fixate a cranial flap, * easy to use - should have intuitive ergonomic instrumentation facilities handling", "external drainage and monitoring used to manage csf drainage, * should have tapered drip chamber bottom for accurately measuring small fluid volumes, * drip chambr should have 75ml capacity, should have magnifying lens at front of chamber to visualize csf drip pulsation, * should have hydrophobic microbial air vent helps prevent clogging, * should have large easy to read number, * pressure indicator window should be easy to identify, * should have colour stripped tubing for easy identification of patient line, * optional laser level for impoved accuracy, * one system for both ventricular and lumbar drainage, * should have rotating pressure scale with only one scale visible at a time, * mri safe to 3-tesla (without laser), * completely disposable, * should have designated port for an external pressure transducer, * hangs from iv pole with cord or attached with integrate pole clamp should have minimum 3 needle-less injection sites for sampling cs", "fixed pressure ventricedo peritoneal of atrial shunts with or w/o siphon control device, * valves should be available in seven different configurations, including two with the siphon control device, * should be available in three shapes, burr hole, contoured and ultra small, to accommodate different patient groups and different surgical preferences, * should have three pressure high, medium and low pressure paediatric and adult., * siphon control device should allow the patient to maintain icp within a normal physiological range regardless of flow rate or patient posture, * pressure level and flow direction markings viewable on x-ray, * fixed pressure kit should include : a one way valve, ventricular catheter and a peritoneal catheter, * should have valve mechanism fabricated from dissimilar materials, reducing the possibility of valve sticking, * silicone reservoir dome allows for injection and csf sampling, * polypropylene needle guard should minimizes the potential of a needle completely penetrating the valve, * should have non metallic design for not interfere with ct scans or mri, * catheters should be fabricated from barium-impregnated tubing with tantalum tip to allow for x-ray visualization, * length markers show depth of penetration during insertion, * should have right angle clip which provides non-kinking bend in the ventricular catheter at the burr hole site", "adjustable pressure valves/shunts ( programmable shunt ), * should able to do non invasive adjustment and also should not require x-ray confirmation, * should be latex free, * should be mri compatible, * should have valve system with minimum 10 (ten) settings., * should have injectable reservoir dome, * should have distal and proximal occluders for selective flushing, * should be available with and w/o siphon control device (non siphon control), * should have portable handheld adjustment system and do not require an outside power source, * built in adjustment magnet and lcd read out screen in the handheld system, * confirmation from x-ray should be optional not mandatory, * should provide numeric interpretation (mm h2o) of the valve performance setting with included smart card, * should be powered by tow aa batteries, * programmable non siphon control lumboperitoneal shunt kit should also be available, * nsc lp valve should include integral lumbar connector and strain relief for easy, non kinking attachment of the proximal lumber catheter., * should have small inner lumen in peritoneal catheter in nsc lp shunt kit to preserve distal shunt resistance, * company main with magnetic control should available in jaipur.", "titanium mesh for cranioplasty, * should be made up of titanium and of different sizes., * should be shapable with screw", "dural graft implant (absorbable collagen matrix), * size 1x1""', * should be onlay dural graft,, * should be bioabsorbable,, * suturing / gluing should not be required,, * should be sterile.", "dural graft implant (absorbable collagen matrix), * size f'1x3""* should be bioabsorbable,, * suturing / gluing should not be required,, * should be sterile., * should be onlay dural graft,", "dural graft implant (absorbable collagen matrix), * size 2x2""', * should be onlay dural graft,, * should be bioabsorbable,, * suturing / gluing should not be required,, * should be sterile.", "dural graft implant (absorbable collagen matrix), * size 3x3""', * should be onlay dural graft,, * should be bioabsorbable,, * suturing / gluing should not be required,, * should be sterile.", "dural graft implant (absorbable collagen matrix), * size 4 5 "", * should be onlay dural graft,, * should be bioabsorbable,, * suturing gluing should not be required,, * should be sterile.", biological fibrin glue with calcium chloride human protein kit 2 ml/4ml, methy metha acrylate bone cement., absorbable porcine gelatin based topical absorbable flowable hemostat with 6cc syringe prefilled with hemostatic matrix. 2000iu of sterile lyophilized human thrombin total volume 8 ml with 14.3 cm white applicator tip and 14.6 cm blue flexible applicator tip. usfda approved, absorbable gelatin based topical flowable haemostate with prefilled syringe., lumbo peritoneal shunt - designed for shunting of csf from subarchnoid space to peritoneal cavity - and should be made up of silicon rubber., aneurysm clip (sugita type) - should be made up of titanium/mri compatible material., 1) straight (s) 7mm, 2 ) straight (l) 10mm, 3) bayonet 7mm, 4) bayonet 10mm, 5) bent 8mm, 6 ) slightly bent, 7) side wood bent 8mm, 8) side wood curved 9mm, 9) straight mini type (s) 4mm, 10) straight minitype (l), 11) bent minitype 5mm, 12) bayonet minitype 5mm, 13) straight (s) 12mm, 14) bayonet (s), 15) l shaped (m) 7.5mm, 16) 45 angled (l), 17) straight (m) fenestrated large type 9mm, 18) bent (m) fenestrated large type 7.5mm, 19) fenestrated type bent (m) 7.5mm, 20) fenestrated large type l-shaped (m) 7.5mm, "disposable perforator, * should be of 9mm, 11mm, 14mm size., * should include both burr and perforator with dural guard., * should have colour code for size variation., * should be sterile", oxidized regenerated cellulose based topical absorbable haemostatic size 2 3", oxidized regenerated cellulose based topical absorbable haemostatic size 4 x8"., oxidized regenerated cellulose based topical absorbable haemostatic size 2 14"., powdered exidized regenerated cellulose with prefilled easy to use applicator., powdered oxidized regenerated cellulose with endoscope application., "oblique lumber interbody fusion device or cage-, the implant must be radiolucent poly ether ether ketone. should have space for filling the bone graft. should be self distracting bullet shaped with convex shap designed to fit patient anatomy., should be available in various lordotic options of 0 degree, 6 degree & 12 degree & diameter start from 8mm to 16mm in increment of 2mm. should have 5mm cage length in front of the cage markers which should be visible in ap xray view., should be available in different lengths 40mm, 45mm, 50mm, 55mm & 60mm. should have an anterior nose head of 5mm for easier insertion. should be an impacted cage system compatible with minimally access technique., should be able to undergo orthogonal maneuvers.", "pedicle screw system with cobalt chrome multiaxial head, -system should have osteogrip dual lead thread pattern with a tapered tip for enhanced fixation at the bone implant interface, better closure mechanism., -system implant should be equipped with implant tracking system technology & provide device quality and utilization related data. as per department requirement, -factory calibrated navigated top loading scree with cobalt chrome tulip head for strong fixation & low profile to treat trauma, tumor & degenerative pathologies., -system should be able to accommodate multiple rod material option., - system should be compatible with enabling technology which is installed in organisation., -system should be compatible with 4.5mm to 5.5mm rod., -system should have option for titanium monoaxial screw & hooks to be used 4.5mm & 5.5mm rod., -system should have colour coding for easy to use., -system should have ergonomically designed instruments.", "percutaneous pedicle screw fixation system with dual thread technology-, the system should single & multiple level capability., the system should have polyaxial/ monoaxial screw with top loading locking mechanism., implants should be cannulated poly axial with 4.5, 5.5 & 6.5mm dia screw for percutaneous thoraculumber fixation with break off set screw. system should have rod option for precut & prebend & straight of different sizes., system should have free hand rod inserter instruments., system should have for measuring & rod confirmation tool which help to surgeon to check the insertion of the rod on to the screw percutaneously. system should provide unique method of compression & distraction., - system should be compatible with enabling technology which is installed in organisation., - system should have cannulated instruments for ease of working on guide wire. the system should have reverse threaded technology to reduce pullout strength., implants should be top loading, top tightening & most importantly reverse thread technology. system should compatible with 5.5mm dia rod., system should be available for demonstration as per the requirement. implant head should be made of cobalt chromium material", "fenestrated percutaneous pedicle screw fixation system -, the system should single & multiple level capability., the system should have polyaxial/ monoaxial screw with top loading locking mechanism., implants should be cannulated poly axial with 4.5, 5.5 & 6.5mm dia screw for percutaneous thoraculumber fixation with break off set screw. system should have rod option for precut & prebend & straight of different sizes., system should have free hand rod inserter instruments., system should have for measuring & rod confirmation tool which help to surgeon to check the insertion of the rod on to the screw percutaneously. system should provide unique method of compression & distraction., - system should be compatible with enabling technology which is installed in organisation., - system should have cannulated instruments for ease of working on guide wire. the system should have reverse threaded technology to reduce pullout strength., implants should be top loading, top tightening & most importantly reverse thread technology. system should compatible with 5.5mm dia rod., system should be available for demonstration as per the requirement. implant head should be made of cobalt chromium material, system should have option for cement insertion system", "demineralized bone metrix bone substitute-, should be having the capability for both osteoconduction and osteoindution. should be available in putty form. should be available in 3 sizes based on volume of graft- 1cc, 2.5cc & 5cc., should be available in sterile packing.", "bmp graft, single peotein- bone morphogenic protein (rhbmp2), size available in - x small (1.4cc), small (2.8cc), medium (5.6cc), large (8cc).", "synthetic bone graft-, synthetic bone grafton substitute with recordable ceramic granules., -graft should have hydroxyapatite (ha) 15%., -graft available in sterile packaging., -graft available in based on volume 5cc, 10cc, & 15cc.", "bone cement, synthetic pmma & hydroxyapatite combine with osteoconductivity., -should be 50% hydroxyapatite in the powder component., -should be long working time & low exothermicity., -should be in sterile packing.", "recharge free implantable sacral neuro stimulator (mri compatible):, single - channel implantable sacral neurostimulator for use with mri compatible tined leads, and patient programmer, full body mri compatible & should be compatible with constant current. advanced programming features for patients and clinicians., full body mri compatible with 1.5t and 3t machines, 7 distinct programs with 4 custom options, smart patient hand held programmer, mri mode should be available on the programmer, electrode configuration 4 lead electrodes as anode (+), cathode (-), or off. 1 case electrode as anode (+) or off, amplitude 0 to 12.5 ma (0.1 ma increment), rate rate range: 3 to 130 hz, pulse width 40 to 450 s (10 s increment), cycling off, on: 2 s to 24 hrs softstart/stop off, on: 1, 2, 4, 8, 15, or 30 second ramp duration physical characteristics of the neurostimulator should be maximum of,, height 44 mm (1.7 in), length 51 mm (2 in), thickness 7.7 mm (0.3 in), weight 22 g (0.77 oz), volume 12.5 cm3 (0.76 in3 ), surface area 47.3 cm2 (7.33 in2 ), materials and substances to which the patient can be exposed b c d e f titanium, polyurethane, silicone, silicone medical adhesive, power sourceg 1.2 amp hours, 3.2 v lithium, fluorinated carbon silver vanadium oxide hybrid, expected lifetime 10.2", "spinal cord stimulation implants:, implantable neurostimulation system is indicated for spinal cord stimulation (scs) as an aid in the management of chronic, intractable pain of the trunk and/or limbs - including unilateral or bilateral pain., fully implantable spinal cord neurostimulator, ~1 hour recharge empty to full (approximate time), technology automatically adjusts the therapy as your patient moves, delivering a personalized treatment based on seven unique body positions., physicians to objectively monitor a patient's progress., ergonomic features:, weight : approx.29.1g (1.0oz), height : approx. 57.1mm (2.2in), width: approx. 47.2mm (1.9in), battery type : rechargeable, volume : approx. 13.9 cc, technology should be optimized for the increased energy demands of hd therapies., technology should give patients the broadest access to mri* because it allows mri scans anywhere on the body, under certain conditions., >95% battery capacity retained at 9 years, independent of therapy parameters or recharge preferences, ability to recharge a completely discharged device using recharger., easy-to-adjust therapy using programmer., easy-to-read interface", "percutaneous leads :, subcompact eight electrode lead., lead must have 8 contacts., contact length should be approx. : 3.0 mm, contact spacing should be approx. : 1.5 mm, lead length approx. : 75 cm, lead kit must have bent stylet , straight stylet, passing straw, guide wire, tunneling tip, tunneling rod, 14 ga 3.5"" tuohy needle , 14 ga 3.5"" tuohy curved tip needle and anchor with anchor dispenser tool., extension :, should be approx.. 60 cm in length, extension should have 8 contacts., extension kit must have 1 8 extension boots, clear, 1 8 extension boots, white set screw, approx.. 38 cm passer, tunneling obturator, torque wrench. surgical lead :, 16-contact paddle lead ( 5-6-5), approx.. size : 10.0 mm wide, 2.0 mm thick, 65 cm length, lead kit must have :", a) passing elevator, b) lead blank, c) tunneling tool, d) tunneling tool tip, e) passing straw, f) torque wrench, g) 1 8 extension boots, "intrathecal programmable pump :, itp is implantable infusion system delivers drug directly into the intrathecal space, thereby bypassing the blood-brain barrier., as a result, only a fraction of the oral dose is needed to eliminate systemic opioids, sustain pain relief produce efficacy while minimizing systemic side effects. features:, pump should offer in two sizes (20 ml or 40 ml) to create efficient refill intervals., powerful long-lasting durability with diamond-like carbon coating that resists the wear from gear revolutions designed to last up to seven years at up to 0.9 ml/day flow rate, 0.3% repeatability each pump precisely delivers a reliable and consistent amount of drug allows safe full-body access to 1.5- and 3.0-tesla mri., the pump must be designed to resume programmed therapy after the scan and does not need to be emptied prior to a scan, minimizing drug waste and procedural steps., pump has catheter access port, catheter port, suture loop, reservoir fill port., the pump should be programmed to vary the amount of medication up to 13 different times throughout a day. programming can also vary from day to day., the pump should store important data about the device and settings, so it is not needed to carry records if patient travels or change clinics. the information should be accessible with a clinician programming device., the pump should allow for full body mri scans under specific conditions.", "dural patch, * should be made up of material poly-l-lactic acid to provide the biocompatibility & non toxicity., * should be hydrophobic to provide water light barrier for the prevention of csf leakage., * should provide the bio mimetic structure which resembles to the microstructure of native dural matrix, providing an appropriate environment for dural cell growth., * should be absorbable within 6 months., * should be sutured and onlay on to the dural defect., * should be available as pre sterilised by gama radiation., * thickness should be from 0.1-0.5 mm., * should be available in sizes in mm as", 15x20mm, 20x30mm, 30x40mm, 40x60mm, 60x60mm, 60x80mm, "burr hole bone void filler/scaffold, designed to perfectly fit into burr holes, allows easy handling. does not require additional fixation., the plug should have option to use along with a drain or shunt size of plug corresponds to the perforator size. should have sizes ranging from 8mm to 15mm(with 1mm increment), 3d printed fused deposition modelling method, prints layer by layer., tissue friendly material, not a permanent implant, reduce risks of infection, reduce risks of long- term morbidity. degrades in the body 18-24 months via hydrolysis., open pore system: visible pores from the side and top of the scaffold this is to facilitate rapid vascularization., each layer is printed at an angle to the previous - cancellous bone graft revascularization occurs rapidly because of its open microarchitecture. scaffold structure - porous interconnected micro-architecture that demonstrates mechanical properties similar to human cancellous bone., should be a radiolucent material visible to access bone in-growth, should come in sterile pack sterile by gamma irradiation, in a single layer foil packaging. shelf life 2years", "craniotomy bone void filler/ scaffold-, it should be a press and fit scaffold to fill the bone gaps along with the craniotomy flap. is flexible and easily contoured to fit in the gap, should be available in different sizes to fit the craniotomy gaps, 3d printed fused deposition modelling method, prints layer by layer., tissue friendly material, not a permanent implant, reduce risks of infection, reduce risks of long- term morbidity. 7degrades in the body 18-24 months via hydrolysis., open pore system: visible pores from the side and top of the scaffold this is to facilitate rapid vascularization., each layer is printed at an angle to the previous - cancellous bone graft revascularization occurs rapidly because of its open microarchitecture. scaffold structure - porous interconnected micro-architecture that demonstrates mechanical properties similar to human cancellous bone., should be a radiolucent material visible to access bone in-growth, should come in sterile pack sterile by gamma irradiation, in a single layer foil packaging. shelf life 2years, all implant should made of titanium/mri compatible material & should be of same company any make for a single surgery construct. all various sizes of implants should be compatible/fitted in the system of the bidders implant., all various instruments needed for fitting the implants should be supplied by bidder prior to the surgery. implant should be u.s. fda/four digit europen ce/cdsco certified., bidder should have provide clinical studies with minimum three year follow up., bidder should have provide satisfaction letter from well recognized government institutes. like aiims/pgi/sgpgi/cmc veuore/or equivalent institute", "bone void filler/scaffold, should be a semi-rigid bone filler., should be malleable and easily contoured using warm sterile water or saline easy to cut with surgical scissors and easy to trim with surgical blade. should be available in different sizes and thickness, 3d printed fused deposition modelling method, prints layer by layer., tissue friendly material, not a permanent implant, reduce risks of infection, reduce risks of long- term morbidity. degrades in the body 18-24 months via hydrolysis., open pore system: visible pores from the side and top of the scaffold this is to facilitate rapid vascularization., each layer is printed at an angle to the previous - cancellous bone graft revascularization occurs rapidly because of its open microarchitecture.scaffold structure - porous interconnected micro-architecture that demonstrates mechanical properties similar to human cancellous bone., should be a radiolucent material visible to access bone in-growth, should come in sterile pack sterile by gamma irradiation, in a single layer foil packaging. shelf life 2years"

Jaipur, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
143 |Bid Value:₹ 8.13 Cr. |EMD:₹ 16.26 Lakh |22-09-2026 5 Days Left|T247 ID-104109982

supply of - medicated coronary stents sirolimus eluting , medicated,coronary stents sirolimus eluting 1 , medicated coronary,stents sirolimus eluting 2 , medicated coronary stents,sirolimus eluting 3 , medicated coronary stents sirolimus,eluting 4 , medicated coronary stents sirolimus eluting 5 ,,medicated coronary stents sirolimus eluting 6 , medicated,coronary stents sirolimus eluting 7 , medicated coronary,stents sirolimus eluting 8 , medicated coronary stents,sirolimus eluting 9 , medicated coronary stents sirolimus,eluting 10 , medicated coronary stents sirolimus eluting 11,, medicated coronary stents sirolimus eluting 12 ,,medicated coronary stents everolimum eluting stents ,,medicated coronary stents everolimum eluting stents 1 ,,medicated coronary stents everolimum eluting stents 2 ,,medicated coronary stents everolimum eluting stents 3 ,,medicated coronary stents everolimum eluting stents 4 ,,medicated coronary stents everolimum eluting stents 5 ,,medicated coronary stents everolimum eluting stents 6 ,,medicated coronary stents everolimum eluting stents 7 ,,medicated coronary stents zotarolimus eluting stents ,,medicated coronary stents zotarolimus eluting stents 1 ,,medicated coronary stents zotarolimus eluting stents 2 ,,medicated coronary stents zotarolimus eluting stents 3 ,,medicated coronary stents zotarolimus eluting stents 4 ,,other coronary drug eluting stent newer limus analog ,,coronary stent graft , aortic stents , aortic stents 1 ,,peripheral vascular stent carotid stents selfexpandable 1 ,,peripheral vascular stent carotid stents selfexpandable 2 ,,peripheral vascular stent carotid stents selfexpandable 3 ,,peripheral vascular stent carotid stents selfexpandable 4 ,,peripheral vascular stent carotid stents selfexpandable 5 ,,peripheral vascular stent renal balloon mounted stent ,,peripheral vascular stent renal balloon mounted stent 1 ,,peripheral vascular stent renal balloon mounted stent 2 ,,peripheral vascular stent renal balloon mounted stent 3 ,,balloon mounted peripheral stents , balloon mounted,peripheral stents 1 , balloon mounted peripheral stents 2 ,,balloon mounted peripheral stents 3 , balloon mounted,peripheral stents 4 , balloon mounted peripheral stents 5 ,,balloon mounted peripheral stents 6 , selfexapnding,peripheral stents , selfexapnding peripheral stents 1 ,,selfexapnding peripheral stents 2 , selfexapnding,peripheral stents 3 , selfexapnding peripheral stents 4 ,,selfexapnding peripheral stents 5 , selfexapnding,peripheral stents 6 , peripheral stent grafts , peripheral,stent grafts 1 , peripheral stent grafts 2 , peripheral stent,grafts 3 , peripheral stent grafts 4 , peripheral stent grafts,5 , peripheral stent grafts 6 , peripheral stent grafts 7 ,,peripheral stent grafts 8 , peripheral stent grafts 9 ,,peripheral stent grafts 10 , peripheral stent grafts 11 ,,peripheral stent for coarctation of aorta , peripheral stent for,coarctation of aorta 1 , peripheral stent for coarctation of,aorta 2 , ivc filter temporary , ivc filter permanent , ivc,filter permanent mri compatible , pda closure device,diameter of all sizes device only , pda closure device,diameter of all sizes device with all accessories for,deployment , pda duct occluder type ii diameter of all,sizes with all the accessories like delivery sheath loader,deploying cable etc , pda closure selfexpanding nitinol,device of large size upto 24 mm , muscular vsd closure,device different sizes device only , muscular vsd closure,device device with all the accessories like delivery sheath,loader deploying cable etc , muscular vsd closure device,postinfarction device only all sizes , muscular vsd closure,device postinfarction device with all the accessories like,delivery sheath loader deploying cable all sizes ,,perimembranous vsd closure device device only , vsd,closure device double disk selfexpandable all sizes ,,perimembranous vsd closure device device with all the,accessories like delivery sheath loader deploying cable etc ,,asd closure device device only , asd closure device device,with all the accessories like delivery sheath loader,deploying cable etc , asd nitinol occlusion device size upto,44 mm with delivery system , cribriform asd closure device,for fenestrated asd , amplatzer vascular plug type 1 all,available sizes , amplatzer vascular plug type 2 all available,sizes , amplatzer vascular plug type 4 all available sizes ,,balloonexpanding type of tavi transcatheter aortic valve,implantation with all standard accessories for implantation,different sizes , selfexpanding type of tavi transcatheter,aortic valve implantation with all standard accessories for,implantation different sizes,sirolimus coated durg eluting coronary stent.,cobaltchromium platform with biodegradable polymer small,strut thickness entry profile 0.017 or less with lowest shaft,profile 5f guide compatible different length and diameter.,,sirolimus coarted drug eluting stent with abluminal coating,cobalt chromium platform 80 micrometer strut thickness,open cell stent design 5f guide compatibility upto 38 mm,length 2.25 to 4 mm diameter., sirolimus coated drug,eluting coronary stent with abluminal coating and,biodegradable polymer. cobaltchromium platform small,strut thickness entry profile 0.017 or less with lowest shaft,profile 5f guide compatible different length and diameter.,,sirolimus coated drug eluting coronary stent with cobalt,chromium platform open cell design with hydrophilic,hydrophobic polymer blend 60 m strut thickness with,inphase valley to valley links for better support diameter of,24.5 mm and length of 848 mm., sirolimus coated drug,eluting tapered coronary stent with 0.5 mm difference of,diameter between proximal and distal end. cobaltchromium,platform with biodegradable polymer small strut thickness,different diameter of upto 4.5 mm (proximal end) and length,available upto 50 mm., sirolimus coated drug eluting,coronary stent with no polymer (polymer free stent) small,strut thickness with lowest shaft profile 5f guide compatible,different length and diameter., sirolimus coated drug,eluting coronary stent microporous surface of metal,platform for drug stability with thin layer of polymer small,strut thickness with lowest shaft profile 5f guide compatible,different length and diameter., sirolimus coated drug,eluting coronary stent with biostable polymer.,cobaltchromium platform small strut thickness entry profile,0.017 or less with lowest shaft profile 5f guide compatible,different length and diameter., sirolimus coated drug,eluting coronary stent cobalt chromium platform with,ultrasmall strut thickness of upto 50 m hybrid cell design,with biodegradable pollymer 5f guide catheter compatible,with variable diameter (2.0mm to 4.5 mm) and length,available up to 48 mm., sirolimus coated drug eluting,coronary stent cobalt chromium platform with uniform small,strut thickness of 60 m in all diameters 5f guide catheter,compatible with diameter available from 2.25 mm to 4.0,mm and length available up to 48 mm in all diameters,,sirolimus eluting coronary stent bio degradable polymer,hybrid open cell double helix design sine wave 333 link,strut thickness 65 m., sirolimus coated drug eluting,coronary stent. cobalt chromium platform with strut,thickness of 65 m biodegradable polymer entry profile,0.017 or less with lowest shaft profile 5f guide compatible,different length and diameter., sirolimus coated drug,eluting coronary stent with cobalt chromium platform open,cell design biodegradable polymer 60 m sturt thickness,with ldz links for better support diameter of 24.5 mm and,length of 848 mm., everolimus coated drug eluting coronary,stent stainless steelcobalt chromium platform and biostable,polymer small strut thickness with lowest shaft profile 5f,guide compatible different length and diameter., everolimus,coated drug eluting coronary stent cobalt chromium,platform with ultrasmall strut thickness of upto 50 m,biodegradable polymer 5f guide catheter compatible with,variable diameter and length available up to 48 mm.,,everolimus coated drug eluting coronary stent with cobalt,chromium platform open cell design with hydrophilic,hydrophobic polymer blend 60 m strut thickness with,inphase valley to valley links for better support diameter of,24.5 mm and length of 848 mm., everolimus coated drug,eluting coronary stent cobalt chromium platform with,uniform small strut thickness of 60 m in all diameters 5f,guide catheter compatible with diameter available from,2.25 mm to 4.0 mm and length available up to 48 mm in all,diameters., everolimus coated drug eluting coronary stent,with abluminal coating and biodegradable polymer. cobalt,chromium platform small strut thickness entry profile 0.017,or less with lowest shaft profile 5f guide compatible,different length and diameter, everolimus coated drug,eluting coronary stent with biostable polymer.,cobaltchromium platform small strut thickness entry profile,0.017 or less with lowest shaft profile 5f guide compatible,different length and diameter, everolimus coated drug,eluting coronary stent open cell design cobaltchromium,platform biostable polymer variable strut thickness of 75 to,85 m depending on stent diameter for better radial,strength 5f guide compatible. diameter available between,2.0 mm to 4.5 mm in different lengths., everolimus coated,drug eluting coronary stent cobalt chromium platform with,strut thickness of 65 m biodegradable polymer entry,profile 0.017 or less with lowest shaft profile 5f guide,compatible different length and diameter., zotarolimus,coated drug eluting coronary stent cobalt chromium,platform 5f guide catheter compatible with diameter,available from 2.25 mm to 4.0 mm and length available up,to 48 mm., zotarolimus coated drug eluting coronary stent,stainless steelcobalt chromium platform and biostable,polymer small strut thickness with lowest shaft profile 5f,guide compatible different length and diameter.,,zotarolimus coated drug eluting coronary stent with,biostable polymer. cobaltchromium platform small strut,thickness entry profile 0.017 or less with lowest shaft profile,5f guide compatible different length and diameter.,,zotarolimus coated drug eluting coronary stent open cell,design cobaltchromium platform biostable polymer variable,strut thickness of 75 to 85 um depending on stent diameter,for better radial strength 5f guide compatible. diameter,available from 2.0 mm to 4.5 mm in different lengths., drug,eluting coronary stent platinum chromium platform with,small strut thickness 5f guide catheter compatible with dual,layer balloon design for better strut apposition different,length and diameter., drug eluting cobalt chromium,platform with ridaforolimus eluting stent. entry profile,0.017 or less with lowest shaft profile 5f guide compatible,different length and diameter., coronary stent graft,diameter 2.544.5 mm various lengths compatible with 6f,guide catheter for even the largest available diameter stent,graft., balloon premounted stents for coarctation of aorta,length 3060 mm various diameter of 12 to 30 mm, covered,stent for coarctation of aorta length 3070 mm various,diameter ofupto40 mm., nitinol carotid stent 0.014 guide,wire compatible 510 mm diameter nontapered, nitinol,carotid stent 0.014 guide wire compatible 510 mm diameter,tapered, nitinol monorail closed cell design with flared ends,tapered 6f sheath compatible, stainless steel monorail,selfexpandable carotid stent, nitinol double layer,micromeshmicronet rapid exchange carotid stent to prevent,plaque protrusion and emboli release after implantation,0.014 guide wire compatible with 5f guide catheter,compatibility shaft length 140 cm 510 mm diameter and,various length., monorail 0.014 wire compatible cobalt,chromium renal stent of diameter 47 mm of varying length,,monorail 0.014 wire compatible cobalt chromium renal stent,of diameter 57 mm of varying length 5 f compatible,,monorail 0.018 wire compatible balloon mounted renal stent,of diameter 47 mm of varying lengths, balloon mounted,over the wire renal stents, peripheral stainlesssteel stent of,diameter 510 mm and length 2060 mm, peripheral,stainlesssteel stent of diameter 510 mm and length 1757,mm, peripheral stainlesssteel stent of diameter 1114 mm,and length 2060 mm, peripheral balloon expandable cobalt,chromium stent with high radial force with smaller,introducer sheath semi flexible hybrid cell design with,lengths from 13mm to 57mm diameter 632 mm, peripheral,cobalt chromium stent 510 mm diameter and lengths 1560,mm, peripheral cobalt chromium stent with thin struts over,the wire 0.035 wire and 6f sheath compatible across all,sizes (510mm diameter) and length, peripheral cobalt,chromium stent monorail base all sizes, over the wire 0.035,wire compatible nitinol peripheral stent of diameter510 mm,of varying lengths., over the wire 0.035 wire compatible,nitinol peripheral stent of diameter 1114 mm of varying,lengths., over the wire 0.035 wire compatible nitinol,peripheral stent of diameter 1524 mm of varying lengths.,,nitinol stents of all sizes and lengths compatible with 0.018,wire, vascular mimetic stents for distal sfa popliteal and,across joints 0.018' compatible nitinol interwoven design of,47 mm diameter and lengths upto 200 mm., monorail based,nitinol peripheral selfexpanding stent of all sizes of varying,lengths., over the wire 0.035 wire compatible,selfexpandable stent of braided construction with higher,flexibility and improved compression resistance of diameter,524 mm variable lengths., aortic stent graft selfexpandable,bifurcated diameter 23 mm or less and 34 mm or more with,delivery system and contralateral limb. the manufacturer,should agree to supply the size customized to the patient's,anatomy based on ct imaging, aortic stent graft,selfexpandable tubular diameter 23 mm or less and 34 mm,or more with delivery system and contralateral limb. the,manufacturer should agree to supply the size customized to,the patient's anatomy based on ct imaging, aortic stent,graft for thoracic endovascular aortic repair with delivery,system. proximal stent graft diameter from 22mm or less to,46 mm or more in varying lengths. the manufacturer should,agree to supply the size customized to the patient's,anatomy based on ct imaging, extension tube graft for,aortic stent graft, lliac extension for aortic stent graft,,balloon expandable peripheral stent graft of all diameters,and varying lengths compatible with 6f7f8f., balloon,expandable stent graft with ptfe expandable upto 24 mm.,,selfexpandable peripheral stent graft of all diameters and,varying lengths, selfexpanding covered stents of diameters,614mm and length 2070 mm., selfexpandable aortic stent,graft expandable to 24 mm, selfexpandable stent graft,expandable to 14 mm, ptfe covered balloon expandable,cobalt chromium stent with high radial strength of length,1857 mm and diameter up to 35 mm., non mounted stent,for coarctation of aorta length upto 30 to60 mm various,diameter of 12 to 30 mm, balloon premounted stent for,coarctation of aorta length upto 30 to 60 mm various,diameter of 12 to 30 mm, covered stent for coarctation of,aorta length upto 30 to 70 mm various diameter upto 40,mm, ivc filter temporary., ivc filter permanent, ivc filter,permanent mri compatible, pda closure device diameter of,all sizes device only., pda closure device diameter of all,sizes device with all accessories for deployment, pda duct,occluder (type ii) diameter of all sizes with all the,accessories like delivery sheath loader deploying cable etc.,,pda closure selfexpanding nitinol device of large size upto,24 mm, muscular vsd closure device different sizes device,only, muscular vsd closure device device with all the,accessories like delivery sheath loader deploying cable etc.,,muscular vsd closure device (postinfarction) device only all,sizes, muscular vsd closure device (postinfarction) device,with all the accessories like delivery sheath loader,deploying cable all sizes, perimembranous vsd closure,device device only, vsd closure device double disk,selfexpandable all sizes, perimembranous vsd closure,device device with all the accessories like delivery sheath,loader deploying cable etc., asd closure device device,only., asd closure device device with all the accessories like,delivery sheath loader deploying cable etc., asd nitinol,occlusion device size upto 44 mm with delivery system,,cribriform asd closure device for fenestrated asd,,amplatzer vascular plug type 1. all available sizes,,amplatzer vascular plug type 2. all available sizes,,amplatzer vascular plug type 4. all available sizes.,,balloonexpanding type of tavi (transcatheter aortic valve,implantation) with all standard accessories for implantation,different sizes., selfexpanding type of tavi (transcatheter,aortic valve implantation) with all standard accessories for,implantation different sizes.,searched string: sirolimus coated durg eluting coronary,stent. cobaltchromium platform with biodegradable polymer,small strut thickness entry profile 0.017 or less with lowest,shaft profile 5f guide compatible different length and,diameter.| quantity - 91

New Delhi, Delhi, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
144 |Bid Value:₹ 8.00 Cr. |EMD:₹ Refer Docs |21-09-2026 4 Days Left|T247 ID-103910793

supply, installation and commissioning of robot-assisted joint replacement system for the department of orthopaedics.

Patna, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
145 |Bid Value:₹ 3.70 Cr. |EMD:₹ Refer Docs |22-09-2026 5 Days Left|T247 ID-103432477

supply of dbs implants and accessories- dbs rechargeable vercise genus r16 with directional lead with minimum 25yr battery life & image guided programming integrated inside cinician programmer with micc "multiple independent current control" technology with 17 independent power sources, it should offer current steering with monopolar as well as bipolar settings, directional bipolar, zero volt technology. bluetooth connectivity with typical range from 9ft to 19ft. jusedar ceapproved, dbs recnargeable vercise genus r16 with non directional lead with minimum 25vr battery life & image guided programming integrated inside clinician programmer micc, dbs non rechargeable vercise genus p16 with directional lead with image guided programming integrated inside clinician programmermicc "multiple independent current, dbs rechargeable replacement kitvercise genus r16 with m8 adapter (medtronic to boston scientific device replacement, dbs implant kit with non rechargeable, 3t mri compatible and sensing enabled ipg and directional lead, dbs implant kit and conventionawith rechargeable, 1.5t & 3t mri compatible and sensing enabled ipg and conventional ring mode (non-directional) 4- electrode-contact leads

Jaipur, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
146 |Bid Value:₹ 1.30 Cr. |EMD:₹ 1.30 Lakh |18-09-2026 1 Day Left |T247 ID-103149762

corrigendum : supply of - arthroscopy system (v2) (q2) - | quantity - 1

Siddharth Nagar, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
147 |Bid Value:₹ 1.19 Cr. |EMD:₹ Refer Docs |24-09-2026 7 Days Left|T247 ID-103993597

supply of - total knee system consisting of anatomic radius femur single radus with tibial base plate with match - | quantity - 1

New Delhi, Delhi, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
148 |Bid Value:₹ 99.00 Lakh |EMD:₹ 1.98 Lakh |17-09-2026 Ending Today|T247 ID-103842336

supply of - orthopaedics instruments group tender 1 - | quantity - 1

New Delhi, Delhi, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
149 |Bid Value:₹ 87.00 Lakh |EMD:₹ 1.74 Lakh |17-09-2026 Ending Today|T247 ID-103842338

supply of - orthopaedics instruments group tender 2 - | quantity - 1

New Delhi, Delhi, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
150 |Bid Value:₹ 75.00 Lakh |EMD:₹ 1.50 Lakh |17-09-2026 Ending Today|T247 ID-103842339

supply of - orthopaedics instruments group tender 3 - | quantity - 1

New Delhi, Delhi, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
151 |Bid Value:₹ 72.00 Lakh |EMD:₹ 1.44 Lakh |17-09-2026 Ending Today|T247 ID-103842200

supply of - orthopaedics instruments group tender 4 - | quantity - 1

New Delhi, Delhi, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
152 |Bid Value:₹ 70.22 Lakh |EMD:₹ Refer Docs |21-09-2026 4 Days Left|T247 ID-104206002

supply of - d ifa re 29 titanium 3 dot 5mm suture anchor with two,preloaded braided polyester sutures of different colours,usfda approved , d ifa re 29 5 mm suture titanium double,loaded anchor , d ifa re 29 sterile 2 100 mm bio,degradable pins with compatible instruments dot usfda,approved , d ifa re 29 locking reconstruction plate 3 dot,5mm titanium 10 hole with ten 3 dot 5mm locking head,titanium screws , d ifa re 29 locking reconstruction plate 3,dot 5mm titanium 12 hole with twelve 3 dot 5mm locking,head screws , d ifa re 29 medial proximal tibial locking,plate titanium 7 hole with 06 locking screws usfd approved,and mri compatible , d ifa re 29 femoral neck fracture,fixation plate with three telescoping screws and two cortical,screws titanium , d ifa re 29 distal radius locking plate 2,dot 4 mm 2 dot 7 mm usfd approved titanium left 03,hole with 04 locking and 2 cortical screws , d ifa re 29,variable angle locking 2 dot 4 mm volar extra articular,distal radius plate usfd approved titanium 05 holes right ,,d ifa re 29 locking superior anterior clavicle plate 3 dot 5,usfd approved titanium 07 hole right with 05 locking and,02 cortical screws , d ifa re 29 locking superior anterior,clavicle plate 3 dot 5 usfd approved titanium 07 hole left,with 05 locking and 02 cortical screws , d ifa re 29,disposable hair trimmer blades for surgical preparation one,handset with charger to be given for use with every 100,blades , d ifa re 29 sterile transparent adhesive drape,polyethylene based 35 cm 35 cm adhesive area 10 variation,acceptable usfda approved , d ifa re 29 sterile,transparent adhesive drape polyethylene based 65 cm 45,cm adhesive area 10 variation acceptable usfda approved,, d ifa re 29 cast shoe medium , d ifa re 29 2,chlorhexidine in 70 ethyl alcohol without any moisturizers,surgical scrub , d ifa re 29 surgical cling film roll sterile 4,dot 5 m 10 variation in size acceptable , d ifa re 29,disposable sterile skin marking pen , d ifa re 29,disposable sterile impervious stockinette double layered,with inner layer being fabric 12 48 usfda approved , d ifa,re 29 disposable sterile impervious stockinette double,layered with inner layer being fabric 9 44 usfda approved ,,d ifa re 29 disposable sterile skin stapler at least 35,staples in each stapler , d ifa re 29 sterile disposable,cautery tip cleaning adhesive scratch pad , d ifa re 29,total hip replacement system cemented , d ifa re 29 4,dot 5mm lcp proximal femur plate titanium 10 hole rt , d,ifa re 29 4 dot 5mm lcp proximal femur plate titanium,10 hole lt , d ifa re 29 4 dot 5mm lcp proximal femur,plate titanium 12 hole rt , d ifa re 29 4 dot 5mm lcp,proximal femur plate titanium 12 hole lt , d ifa re 29 4,dot 5mm lcp proximal femur plate titanium 14 hole rt , d,ifa re 29 4 dot 5mm lcp proximal femur plate titanium,14 hole lt , d ifa re 29 sterile cement gun sleeves , d ifa,re 29 protective cap for steinman pins dia 4 dot 5 5 6 mm,dot , d ifa re 29 2 dot 7 3 dot 0 mm 2 dot 4 mm,headless variable pitch threaded compression screw,titanium 9 to 50 mm length , d ifa re 29 3 dot 5mm lcp,extra articular distal humerus plate right and left 6 7 8 10 12,holes with 7 locking and 2 cortical screws , d ifa re 29 4,dot 5 5 5 dot 5mm anatomical lcp for distal femur left,and right 5 6 7 8 9 10 12 14 holes holes with 9 locking head,full , d ifa re 29 3 dot 5mm distal tibial medial,locking plates with at least 6 holes in head and,4567891011 12 holes for shaft , d ifa re 29 6 hole 3 dot 5,mm titanium dcp plate with 14 mmcortical screw 10 nos ,,d ifa re 29 7 hole 3 dot 5 mm titanium dcp plate with 16,mm cortical screw 10 nos , d ifa re 29 8 hole 3 dot 5 mm,titanium dcp plate with 18 mm cortical screw 10 nos , d,ifa re 29 lcp proximal radial plates 2 dot 4 2 dot 7 mm,for radial head rim plates and neck plates right left side 2,4 holes in head , d ifa re 29 3 dot 5mm distal,posterior tibial t locking plates with 4 5 rafting holes,in head and 2 3 holes for shaft with 5 locking , d ifa re 29,coronoid plate system titanium 2 dot 7 mm with minimum,06 screws , d ifa re 29 primary total knee replacement,prosthesis high flexion oxinium consisting of 1 dot,fermoral component option of cr , d ifa re 29 ultra high,molecular weight polyethylene braided no dot 1 suture on,needles on one end sterile disposable dot usfda , d ifa re,29 ultra high molecular weight polyethylene braided tape,2mm 90 cm sterile disposable dot usfda ce european,certified dot , d ifa re 29 padded synthetic splint 10cm 40,cm precut , d ifa re 29 padded synthetic splint 10cm 76 cm,precut , d ifa re 29 padded synthetic splint 10cm 4 dot 6,metres roll , d ifa re 29 padded synthetic splint 12 dot,5cm 4 dot 6 metres roll , d ifa re 29 disposable wrap,around surgical gowns sealed at seams and not stitched low,lint fabric gsm 43 or higher pe , d ifa re 29 orthosuction,with dual filter and dual curved tip short and long with,tubing 2 dot 5 m , d ifa re 29 schanz screws 2 dot 5mm,3 dot 5mm self drilling and tapping 100 mm length dot,material 316 lvm stainless steel dot , d ifa re 29 schanz,screws 4 dot 5mm self tapping 25 30mm threading 150,175 mm length stainless steel dot material 316 lvm , d ifa,re 29 ao pattern locking head screws 5 mm dia self,tapping lengths 14 to 95 mm titanium should be mri safe,dot , d ifa re 29 ao pattern 4 dot 0 mm solid cancellous,screw full threaded length 14 mm to 80mm titanium,should be mri safe dot , d ifa re 29 ao pattern 4 dot 0,mm solid cancellous screw partially threaded length 12 to,80mm titanium should be mri safe dot , d ifa re 29 ao,pattern lc dcp plate 3 dot 5mm 6 7 8 9 10 12 14 hole with,8 self tapping 3 dot 5mm self tapping cortical screws , d,ifa re 29 3 dot 5 mm lcp clavicular hook plates for left,and right side 12 15 18mm hook depth 4 5 6 7 holes 4,locking and 4 cortical , d ifa re 29 3 dot 5 mm clavicular,shaft anatomical locking plates for superior placement for,left and right side 6 7 8 9 holes , d ifa re 29 4 dot 5 5 5,dot 5mm anatomical lcp for distal femur left and right 5 6,7 8 9 10 12 14 holes holes with 9 locking , d ifa re 29 3,dot 5mm distal tibial medial locking plates with at,least 6 holes in head and 4 5 6 7 8 9 10 11 12 holes for shaft,, d ifa re 29 8 hole 4 dot 5 mm narrow titanium dcp plate,with 24 to 33 mm cortical screw 10 nos , d ifa re 29 9 hole,4 dot 5 mm narrow titanium dcp plate with 18 mm,cortical screw 12 nos , d ifa re 29 10 hole 4 dot 5 mm,narrow titanium dcp plate with 24 to 36 mm cortical screw,12 nos , d ifa re 29 locking distal femur plate 4 dot 5 5,dot 0 right 9 10 12 holes titanium with locking and cortical,screws complte set , d ifa re 29 locking distal femur plate,4 dot 5 5 dot 0 left 9 10 12 holes titanium with lockinh,and cortical screws complte set , d ifa re 29 3 dot 5mm,cortex screw self tapping l 40mm , d ifa re 29 3 dot 5mm,cortex screw self tapping l 50mm , d ifa re 29 3 dot 5mm,cortex screw self tapping l 60mm , d ifa re 29 3 dot 5mm,cortex screw self tapping l 70mm , d ifa re 29 3 dot 5mm,cortex screw self tapping l 80mm , d ifa re 29 3 dot 5mm,cortex screw self tapping l 90mm , d ifa re 29 3 dot 5mm,cortex screw self tapping l 100mm , d ifa re 29 3 dot,5mm locking head screw self tapping l 90mm , d ifa re 29,3 dot 5mm locking head screw self tapping l 100mm , d,ifa re 29 3 dot 5mm locking head screw self tapping l,110mm , d ifa re 29 4 dot 5mm cortex screw self tapping,l 40mm , d ifa re 29 4 dot 5mm cortex screw self,tapping l 50mm , d ifa re 29 4 dot 5mm cortex screw self,tapping l 60mm , d ifa re 29 4 dot 5mm cortex screw self,tapping l 70mm , d ifa re 29 4 dot 5mm cortex screw self,tapping l 80mm , d ifa re 29 4 dot 5mm cortex screw self,tapping l 90mm , d ifa re 29 4 dot 5mm cortex screw self,tapping l 100mm , d ifa re 29 5mm locking head screw,self tapping l 50mm , d ifa re 29 5mm locking head screw,self tapping l 60mm , d ifa re 29 5mm locking head screw,self tapping l 70mm , d ifa re 29 5mm locking head screw,self tapping l 80mm , d ifa re 29 5mm locking head screw,self tapping l 90mm , d ifa re 29 5mm locking head screw,self tapping l 100mm , d ifa re 29 4mm ccs tt 20mm to,100mm , d ifa re 29 axillary crutches dot metallic dot,adjustable height adjustable hand grip telescopic complete,with non skid silicone , d ifa re 29 walking stick tripod,dot metallic soft pvc handgrip with non slip ferrule rubber,telescopic adjustable height with locking dot , d ifa re 29,knee brace with patella support and tracking with donning,and doffing loops re alignment element ratchet straps,hook , d ifa re 29 neoprene hinge knee support dot,polycentric joint dot with straps for adjustment dot extra,large , d ifa re 29 knee cap with patella relief dot pull on,dot spandex yarn with four way stretch dot thick knit,dot reduced compression , d ifa re 29 gel insole dot full,length dot polyurethane gel dot fabric top cover dot,sizes xs small medium large xl xxl , d ifa re 29 gel,insole dot 2mm thick dot flat dot xs small medium,large xl xxl , d ifa re 29 elbow cap dot antibacterial,polyamide elastane fabric cotton polyester cover gel pads,with anatomical opening dot conforms , d ifa re 29 wrist,wrap dot skin friendly cotton lycra dot polyurethane foam,lined material dot adjustable compression by hook , d ifa,re 29 wrist forearm brace dot steel splint in the wrist joint,area dot individually adaptable dot sitioning of the fingers,dot , d ifa re 29 wrist splint with thumb spica dot,breathable mesh material dot hook and loop closure dot,universal , d ifa re 29 ankle wrap dot foot loop fixation,design dot material polyester polyamide elastane dot,conforms to european , d ifa re 29 ankle brace dot triple,stabilisation fig of 8 strap lace and integrated rigid splints,dot one step half time adjustment , d ifa re 29 dynamic,cock up splint lt rt , d ifa re 29 high activity insole with,adjustable arch support dot fully customisable with 4 arch,heights and 10 position options , d ifa re 29 silicone arch,support dot large dot , d ifa re 29 walker dot,adjustable height 76cm 88cm folding walker lightweight 4,legged all aluminium pipe two , d ifa re 29 below knee skin,traction kit complete , d ifa re 29 cervical support pillow ,,d ifa re 29 adjustable hard cervical collar , d ifa re 29,sterile disposable suction tube with removable cannula , d,ifa re 29 graduated compression anti embolism stocking,maximum pressure above ankle and least pressure behind,knee , d ifa re 29 non absorbable braided polyester size,no dot 5 with half circle round body needle with reverse,cutting point 75 to 100 cm , d ifa re 29 nonabsorbable,suture braided polyester no dot 5 usfda approved , d ifa,re 29 fibre suture 2 mm for acl graft preperation usfda ,,d ifa re 29 rom knee brace , d ifa re 29 functional,humerus support splint medium , d ifa re 29 functional,humerus support splint large , d ifa re 29 cotton,stockinette 15 cm 10m , d ifa re 29 cotton stockinette 8,cm 10m , d ifa re 29 cotton stockinette 10 cm 10m , d ifa,re 29 sterile disposable universal extremity drape with,conforming circular fenestration tube holders 90 124 usfda,approved , d ifa re 29 no 2 fiber wire with needle width 36,, d ifa re 29 heel cushion silicon , d ifa re 29 toe,separation silicon , d ifa re 29 fiber tape size 2 white blue,working len dot 15 sterile , d ifa re 29 ethibond suture no,5 2 non absorbable , d ifa re 29 cement spacer femoral,and tibial knee mould size large medium small , d ifa re,29 posterior stabilised fixed bearing knee with assymetric,tibia dot cobalt chromium femoral component matching,polyethylene , d ifa re 29 vac hydrophobic dressing with,400 600 micron size reticulated structure foam small,sizemedium size large size extra large , d ifa re 29,polydioxanone barbed bidirectional suture with taper point,half circle needles different sizes size 2 size 3 to 0 box of 12,, d ifa re 29 vacuum dressing set consisting of small size,polyurethane foam pressure sensor sealing material tubing,and cannister , d ifa re 29 vacuum dressing set consisting,of medium size polyurethane foam pressure sensor sealing,material tubing and cannister , d ifa re 29 vacuum,dressing set consisting of large size polyurethane foam,pressure sensor sealing material tubing and cannister , d,ifa re 29 closed suction post op drain spiral slot with,tubings in sterile pack consisting of bellow unit connecting,tube with clamp , d ifa re 29 synthetic bone graft wedges,sterile packed dot dot , d ifa re 29 ss cercalge wire 16,gauge 18 gauge 20 gauge 22 gauge , d ifa re 29,steinmann pins dia 3 dot 5 mm 4 dot 0mm 4 dot 5mm,150 mm long with trocar tip and 3 faced chuck end dot , d,ifa re 29 steinmann pins dia 5mm 6mm 175 mm long with,trocar tip and 3 faced chuck end dot , d ifa re 29 ao,pattern 1 3rd tubular plates 3 dot 5mm 6 8 10 holes 316,lvm stainless steel with compatible 6 3 dot 5mm cortical ,,d ifa re 29 2 dot 0 mm lcp distal ulna plate with pointed,hooks for ulnar styloid fixation with 2 2 dot 0 mm locking,and 2 2 dot 0mm , d ifa re 29 2 dot 7 3 dot 5mm,anatomical lateral distal fibular plates variable angle with 5,7 holes in head and 2 3 holes for shaft , d ifa re 29,cannulated tibial nails for fractures of proximal distal third,tibia with 5 4 mm locking bolts dia 8 8 dot 5mm dot , d,ifa re 29 cannulated screw 4 dot 5mm self tapping fully,threaded sizes from 10mm 75 mm at increment of 5mm , d,ifa re 29 guide wire dia various sizes 1 dot 5 mm 2mm 2,dot 5 mm , d ifa re 29 inter locking femoral nails dia 10,13 mm dot l 320 420mm titanium left or right , d ifa re,29 threaded kirschner wire 20 cm long 1mm 1 dot 5mm,2mm 2 dot 5mm 3mm dia 316 lvm stainless steel dot , d,ifa re 29 ortho surgical gown steriledisposable waterproof,wrap around type large extra large dot it should be made,, d ifa re 29 sterile disposable u drape with tube holders,80 124 4 44 split compliant with iso 11607 2 iso 11810 1,standards , d ifa re 29 stretchable crepe bandage,composed of natural fibres 10 cm 4 mtrs 15 cm 4 mtrs , d,ifa re 29 disposable leg o u drape bis us fda eu ce full,quality assurance , d ifa re 29 disposable screen cover,and trolley cover bis us fda eu ce full quality assurance,, d ifa re 29 surgeons gown double layred wrap around,large size water repellent with gsm 65 77 with knitted cuff ,,d ifa re 29 polyglactin vicryl absorbable suture tape of 30,cm length , d ifa re 29 synthetic absorbable monofilament,polydiaxone polymer loop pds 2 suture with round body,needle dot , d ifa re 29 paraffin gauze dressing with,antibiotic 10 10 cm , d ifa re 29 non woven secondary,dressing transversely stretchable and breathable with,polyacrylate adhesive 5 cm 10 metres , d ifa re 29 non,woven secondary dressing transversely stretchable and,breathable with polyacrylate adhesive 10cm 10 metres , d,ifa re 29 gloves gamma sterile water based polyurethane,coated powder free size 6 dot 5 latex powder free,microopticsurgical , d ifa re 29 gloves gamma sterile,water based polyurethane coated powder free size 7 latex,powder free microopticsurgical gloves , d ifa re 29 gloves,gamma sterile water based polyurethane coated powder,free size 7 dot 5 latex powder free microopticsurgical , d,ifa re 29 single use c arm cover pair sterile packed,waterproof material dot should be compatable with all,model c arm dot , d ifa re 29 single use patient limb,cover dot bis protection level 2 upto thigh length elastic,at three levels packed to be rolled to limbs , d ifa re 29,single use plain drape trolley cover dot bis protection,level 1 one side absorbent and one side impervious to,fluids , d ifa re 29 single use plain drape trolley cover bis,protection level 1 one side absorbent and one side,impervious to fluids , d ifa re 29 single use plain drape,trolley cover dot bis protection level 1 one side,absorbent and one side impervious to , d ifa re 29 sterile,disposable knee drapes pack pack should have one o drape,and 4 sterile sheets of water proof material , d ifa re 29,vertical isolation drape sterile for hip surgery , d ifa re 29,disposable o drape , d ifa re 29 elbow brace m l xl , d ifa,re 29 wrist brace with thumb stabilizer dot thumb,splinting in the abduction position dot mouldable contoured,splints , d ifa re 29 thumb spica dot skin friendly cotton,lycra polyurethane foam lined material dot adjustable,compression by hook , d ifa re 29 humerus brace dot low,density polyethelene and covered with padded fabric dot,breathable drytex fabric lining dot , d ifa re 29 tibial,brace dot fabric laminated foam dot anterior posterior,and lateral pairs of metallic splints dot hook and loop , d,ifa re 29 plantar fasciitis night splint dot dorsiflexion,angled polypropylene shell dot medial and lateral nylon,straps dot , d ifa re 29 coccyx cushion should made up of,medical grade pu foam with easily removable and washable,cover size universal,titanium 3.5mm suture anchor with two preloaded braided,polyester sutures , 5 mm suture titanium double loaded,anchor, sterile 2*100 mm bio degradable pins with,compatible instruments., locking reconstruction plate,3.5mm titanium 10 hole with ten 3.5mm locking , locking,reconstruction plate 3.5mm titanium 12 hole with twelve,3.5mm, medial proximal tibial locking plate(titanium- 7,hole) with 06 locking screws, femoral neck fracture fixation,plate with three telescoping screws and two , distal radius,locking plate 2.4 mm/ 2.7 mm ( usfd approved /titanium),left , variable angle locking 2.4 mm volar extra-articular,distal radius plate , locking superior anterior clavicle plate,3.5 ( usfd approved /titanium) 07 hole, locking superior,anterior clavicle plate 3.5 ( usfd approved /titanium) 07 ,,disposable hair trimmer blades for surgical preparation,(one handset with , sterile transparent adhesive drape,(polyethylene based) 35 cm x 35 cm adhesive , sterile,transparent adhesive drape (polyethylene based) 65 cm x,45 cm adhesive, cast shoe- medium, 2% chlorhexidine in,70% ethyl alcohol without any moisturizers (surgical scrub),,surgical cling film roll- sterile- 4.5 m (10% variation in size,acceptable), disposable sterile skin marking pen, disposable,sterile impervious stockinette, double layered with inner,layer , disposable sterile impervious stockinette, double,layered with inner layer, disposable sterile skin stapler (at,least 35 staples in each stapler), sterile disposable cautery,tip cleaning adhesive scratch pad, total hip replacement,system cemented , 4.5mm lcp proximal femur plate,titanium 10 hole rt, 4.5mm lcp proximal femur plate,titanium 10 hole lt, 4.5mm lcp proximal femur plate,titanium 12 hole rt, 4.5mm lcp proximal femur plate,titanium 12 hole lt, 4.5mm lcp proximal femur plate,titanium 14 hole rt, 4.5mm lcp proximal femur plate,titanium 14 hole lt, sterile cement gun sleeves, protective,cap for steinman pins dia 4.5/5/6 mm., 2.7/3.0 mm, 2.4 mm,headless variable pitch threaded compression screw ,,3.5mm lcp extra articular distal humerus plate right and left,(6/7/8/10/, 4.5/5/5.5mm anatomical lcp for distal femur left,and right, (5/6/7/8/9/, 3.5mm distal tibial medial,locking plates with at least 6 holes in , 6 hole 3.5 mm,titanium dcp plate with 14 mmcortical screw 10 nos, 7 hole,3.5 mm titanium dcp plate with 16 mm cortical screw 10,nos, 8 hole 3.5 mm titanium dcp plate with 18 mm cortical,screw 10 nos, lcp proximal radial plates 2.4/2.7 mm for,radial head rim plates and , 3.5mm distal posterior,tibial t locking plates with 4-5 rafting holes , coronoid,plate system titanium 2.7 mm with minimum 06 screws,,primary total knee replacement prosthesis, (high flexion,,oxinium) , ultra high molecular weight polyethylene braided,no. 1 suture on needles , ultra high molecular weight,polyethylene braided tape 2mm x 90 cm , padded synthetic,splint (10cm x 40 cm) precut, padded synthetic splint (10cm,x 76 cm) precut, padded synthetic splint (10cm x 4.6,metres) roll, padded synthetic splint (12.5cm x 4.6 metres),roll, disposable wrap around surgical gowns sealed at,seams and not stitched, , orthosuction with dual filter and,dual curved tip, short and long, with , schanz screws 2.5mm,& 3.5mm, self drilling and tapping 100 mm length., schanz,screws 4.5mm (self tapping), 25-30mm threading , 150-175,mm , ao pattern locking head screws 5 mm dia, self,tapping, lengths 14 to 95 mm, , ao pattern 4.0 mm solid,cancellous screw, full threaded, length 14 mm to, ao,pattern 4.0 mm solid cancellous screw partially threaded,,length 12 to, ao pattern lc-dcp plate 3.5mm,,(6/7/8/9/10/12/14) hole with 8 self tapping , 3.5 mm lcp,clavicular hook plates for left and right side, 12/15/18mm,hook, 3.5 mm clavicular shaft anatomical locking plates-,(for superior placement) , 4.5/5/5.5mm anatomical lcp for,distal femur left and right, (5/6/7/8/9/10/12, 3.5mm distal,tibial medial locking plates with at least 6 holes in,head, 8 hole 4.5 mm narrow titanium dcp plate with 24 to,33 mm cortical screw , 9 hole 4.5 mm narrow titanium dcp,plate with 18 mm cortical screw 12 nos, 10 hole 4.5 mm,narrow titanium dcp plate with 24 to 36 mm cortical screw,, locking distal femur plate 4.5/5.0,right, 9 ,10,12 holes,,titanium with, locking distal femur plate 4.5/5.0,left 9,,10,12 holes, titanium with , 3.5mm cortex screw, self-,tapping, l 40mm, 3.5mm cortex screw, self-tapping, l,50mm, 3.5mm cortex screw, self-tapping, l 60mm, 3.5mm,cortex screw, self-tapping, l 70mm, 3.5mm cortex screw,,self-tapping, l 80mm, 3.5mm cortex screw, self-tapping, l,90mm, 3.5mm cortex screw, self-tapping, l 100mm, 3.5mm,locking head screw, self-tapping, l 90mm, 3.5mm locking,head screw, self-tapping, l 100mm, 3.5mm locking head,screw, self-tapping, l 110mm, 4.5mm cortex screw, self-,tapping, l 40mm, 4.5mm cortex screw, self-tapping, l,50mm, 4.5mm cortex screw, self-tapping, l 60mm, 4.5mm,cortex screw, self-tapping, l 70mm, 4.5mm cortex screw,,self-tapping, l 80mm, 4.5mm cortex screw, self-tapping, l,90mm, 4.5mm cortex screw, self-tapping, l 100mm, 5mm,locking head screw, self-tapping, l 50mm, 5mm locking,head screw, self-tapping, l 60mm, 5mm locking head,screw, self-tapping, l 70mm, 5mm locking head screw,,self-tapping, l 80mm, 5mm locking head screw, self-,tapping, l 90mm, 5mm locking head screw, self-tapping, l,100mm, 4mm ccs(tt) 20mm to 100mm, axillary crutches.,metallic. adjustable height , adjustable hand grip, , walking,stick tripod. metallic, soft pvc handgrip, with non slip,ferrule , knee brace with patella support and tracking with,donning and doffing , neoprene hinge knee support.,polycentric joint. with straps for adjustment. , knee cap,with patella relief. pull on. spandex yarn with four way,stretch. , gel insole. full length. polyurethane gel. fabric top,cover. (sizes - xs/ small/, gel insole. > 2mm thick. flat. (xs/,small/ medium/ large/ xl/ xxl), elbow cap. antibacterial,polyamide elastane fabric, cotton polyester cover,, wrist,wrap. skin friendly cotton lycra. polyurethane foam lined,material., wrist forearm brace. steel splint in the wrist joint,area. individually , wrist splint with thumb spica.,breathable mesh material. hook and loop, ankle wrap. foot,loop fixation design. material - polyester, polyamide, , ankle,brace. triple stabilisation - fig of 8 strap, lace and,integrated rigid , dynamic cock-up splint (lt) & (rt), high,activity insole with adjustable arch support. fully,customisable with, high activity insole with adjustable arch,support. fully customisable with, silicone arch support.,large., walker. adjustable height (76cm -- 88cm), folding,walker, lightweight 4 , below knee skin traction kit,complete , cervical support pillow, adjustable hard cervical,collar, sterile disposable suction tube with removable,cannula, graduated compression anti embolism stocking,(maximum pressure , non absorbable braided polyester ,,size no.5 with half circle round body, nonabsorbable suture,braided polyester no.5 (usfda approved), fibre suture(2,mm) for acl graft preperation (usfda), rom knee brace,,functional humerus support/splint- medium, functional,humerus support/splint- large, cotton stockinette 15 cm x,10m, cotton stockinette 8 cm x 10m, cotton stockinette 10,cm x 10m, sterile disposable universal extremity drape with,conforming circular, no 2 fiber wire with needle width 36",,heel cushion silicon, toe separation silicon , fiber tape,,size 2, white-blue, working len. 15", sterile, ethibond suture,(no- 5/ 2) non absorbable , cement spacer femoral and tibial,knee mould (size: large, medium , posterior stabilised fixed,bearing knee with assymetric tibia.cobalt , vac,hydrophobic dressing with 400-600 micron size reticulated,structure, polydioxanone barbed bidirectional suture with,taper point half circle , vacuum dressing set consisting of,small size polyurethane foam, pressure , vacuum dressing,set consisting of medium size polyurethane foam, pressure ,,vacuum dressing set consisting of large size polyurethane,foam, pressure , closed suction post op drain (spiral slot),with tubings in sterile pack , synthetic bone graft wedges-,sterile packed. ., ss cercalge wire (16 gauge,18 gauge, 20,gauge & 22 gauge), steinmann pins dia 3.5 mm, 4.0mm,,4.5mm, x 150 mm long with trocar tip , steinmann pins dia,5mm & 6mm x 175 mm long with trocar tip and 3 faced , ao,pattern 1/3rd tubular plates, (3.5mm), (6/8/10 holes), 316,lvm stainless , lcp proximal radial plates 2.4/2.7 mm for,radial head rim plates and neck , 2.0 mm lcp distal ulna,plate with pointed hooks for ulnar styloid fixation ,,2.7/3.5mm anatomical lateral distal fibular plates (variable,angle) with 5-7 , cannulated tibial nails for fractures of,proximal/distal third tibia with 5 x 4 , cannulated screw,,4.5mm, self tapping fully threaded, sizes from 10mm - ,,guide wire dia various sizes 1.5 mm, 2mm, 2.5 mm, inter,locking femoral nails dia 10-13 mm. l- 320-420mm,(titanium), left or, threaded kirschner wire 20 cm long x,1mm, 1.5mm, 2mm, 2.5mm & 3mm , ortho surgical gown,(sterile,disposable) waterproof wrap around type,, sterile,disposable u-drape with tube holders, 80 x 124 , 4 x 44 split,, stretchable crepe bandage composed of natural fibres (10,cm x 4 mtrs , disposable (leg o/u) drape bis/us fda/eu-,ce (full quality assurance), disposable screen cover and,trolley cover bis/ us fda/eu-ce , surgeon,s gown double,layred (wrap around ) large size, water repellent ,,polyglactin (vicryl) absorbable suture tape of 30 cm length ,,synthetic absorbable monofilament polydiaxone polymer,loop pds 2 suture, paraffin gauze dressing with antibiotic,(10 x 10 cm), non woven secondary dressing, transversely,stretchable and breathable with , non woven secondary,dressing, transversely stretchable and breathable with ,,gloves gamma sterile water based polyurethane coated,powder free size 6.5 , gloves gamma sterile water based,polyurethane coated powder free size 7 , gloves gamma,sterile water based polyurethane coated powder free size,7.5 , single-use c-arm cover pair (sterile packed)-,waterproof material. should be , single-use patient limb,cover. bis protection level 2 upto thigh length, , single-,use plain drape/trolley cover. bis protection level 1, one,side , single-use plain drape/trolley cover, bis protection,level 1, one side , single-use plain drape/trolley cover. bis,protection level 1, one side , sterile disposable knee,drapes pack, pack should have one o drape , vertical,isolation drape (sterile) for hip surgery, disposable o-drape,,elbow brace (m, l & xl), wrist brace with thumb stabilizer.,thumb splinting in the abduction , thumb spica. skin,friendly cotton lycra, polyurethane foam lined material. ,,humerus brace. low-density polyethelene and covered with,padded fabric. , tibial brace. fabric laminated foam.,anterior, posterior and lateral pairs of , plantar fasciitis,night splint. dorsiflexion angled polypropylene shell. medial,,coccyx cushion should made up of medical grade pu foam| quantity - 6651

Darjeeling, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
153 |Bid Value:₹ 60.00 Lakh |EMD:₹ 60.00 K |07-10-2026 20 Days Left|T247 ID-104337338

supply of - arthroscopy system (v2) (q2) - | quantity - 1

Gorakhpur, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
154 |Bid Value:₹ 44.63 Lakh |EMD:₹ Refer Docs |17-09-2026 Ending Today|T247 ID-103563855

corrigendum : supply of - all suture anchor , rf ablator probe , bio inductive implant for rotator cuff repair , cannula 7 mm. to 8.5 mm , shaver bur , 4.75 or 5.5 mm absorable suture anchor , 5.5 mm bioabsorable knotless non self tapping anchor , suture passer , disposable suture passer , sutue knotless anchor , 2.3 mm single loaded bioabsorable anchor , 2.9 mm single loaded bioabsorable anchor , calcium sulphae antibiotic carrier kit 10 cc , calcium sulphae antibiotic carrier kit 5 cc - implants of shoulder arthoscopy | quantity - 159

Jaipur, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
155 |Bid Value:₹ 44.58 Lakh |EMD:₹ Refer Docs |26-09-2026 9 Days Left|T247 ID-104246009

supply of - knee braces and splints (v2),prosthetic knee joints (microprocessor-controlled),prosthetic knee joints (non-microprocessor controlled)- | quantity - 30

Angul, Orissa, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
156 |Bid Value:₹ 30.00 Lakh |EMD:₹ 60.00 K |28-09-2026 11 Days Left|T247 ID-102953813

corrigendum : supply of - general instruments and clamps - surgical clamps surgical instruments - artery forceps orthopedic instruments - bone lever | quantity - 2

New Delhi, Delhi, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
157 |Bid Value:₹ 30.00 Lakh |EMD:₹ 60.00 K |24-09-2026 7 Days Left|T247 ID-103910542

wbhf/snph/ 7201 - e-tender for supply of ortho-oncomega-prostheses (implants) (titanium) for the department of orthopaedic surgery by the superintendent, sambhunath pandit hospital, kolkata-700020

Kolkata, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
158 |Bid Value:₹ 30.00 Lakh |EMD:₹ 60.00 K |24-09-2026 7 Days Left|T247 ID-103915657

supply of ortho-onco mega-prostheses (implants) (titantum) for the department of orthopedic surgery to the office of the superintendent of sambhu nath pandit hospital, kol-700020..

Kolkata, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
159 |Bid Value:₹ 29.00 Lakh |EMD:₹ 29.00 K |30-09-2026 13 Days Left|T247 ID-104160679

supply of - orthopaedic battery operated drill system (v2) (q2) - | quantity - 1

Meerut, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
160 |Bid Value:₹ 24.00 Lakh |EMD:₹ 48.00 K |17-09-2026 Ending Today|T247 ID-103841964

supply of - hip preservation set - | quantity - 1

New Delhi, Delhi, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
Prev 7 8 9 Next
whatsapp