Latest Bending Services Tenders 2026

102 |Bid Value:₹ 2.41 Cr. |EMD:₹ 4.83 Lakh |30-09-2026 13 Days Left|T247 ID-104109067

drilling and machining of vande bharat (version -2) wheel discs.

Lucknow, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

103 |Bid Value:₹ 2.13 Cr. |EMD:₹ 39.00 K |18-09-2026 1 Day Left |T247 ID-104021267

grit shot blasting and painting jobs during m and i shutdown at paradip refinery, odisha.

Jagatsinghpur, Orissa, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

104 |Bid Value:₹ 1.97 Cr. |EMD:₹ 2.46 Lakh |22-09-2026 5 Days Left|T247 ID-103902612

custom bid for services - roof support work in underground

Chhindwara, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

105 |Bid Value:₹ 1.93 Cr. |EMD:₹ 3.86 Lakh |28-09-2026 11 Days Left|T247 ID-103894940

corrigendum : t-349 - 2,500 m drilling along inland tract, south west of kushbhadra river and north east of konark, puri district, odisha by sonic drilling method in the boreholes up to the depth of 35.00m and collecting entire drilled material at every one metre depth without any loss and contamination.

Puri, Orissa, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

106 |Bid Value:₹ 1.90 Cr. |EMD:₹ Refer Docs |21-09-2026 4 Days Left|T247 ID-104245553

annual rate contract for drilling and installation of various drinking water works such as head pump, tube well, panghat (except solar panghat) in panchayat samiti, sarada and subordinate gram panchayats.

Udaipur, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

107 |Bid Value:₹ 1.84 Cr. |EMD:₹ 5.51 Lakh |18-09-2026 1 Day Left |T247 ID-104115469

minesminerals drilling - surface drilling; non-energy minerals; rotary core drilling

Jaipur, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

108 |Bid Value:₹ 1.73 Cr. |EMD:₹ 2.17 Lakh |21-09-2026 4 Days Left|T247 ID-103911727

corrigendum : drilling for 2329 mtrs of 300 mm finished dia 38 nos bore holes including supplying and lowering of 200 mm dia of casing pipe ms erw black pipe is 1239 3589 with 6 mm thick - drilling for 2329 mtrs of 300 mm finished dia 38 nos bore holes including supplying and lowering of 200 mm dia of casing pipe ms erw black pipe is 1239/3589 with 6 mm thick for stabilisation purpose on surface by hydro-pneumatic method inside mine

Angul, Orissa, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

109 |Bid Value:₹ 1.68 Cr. |EMD:₹ 3.35 Lakh |22-09-2026 5 Days Left|T247 ID-103504257

corrigendum : t-347 - 7,000m core drilling in pandikimal, area in jharsuguda district, odisha with borehole depth varying from 100m to 250m.

Jharsuguda, Orissa, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

110 |Bid Value:₹ 1.24 Cr. |EMD:₹ 2.48 Lakh |06-10-2026 19 Days Left|T247 ID-104366369

restoration of unit-ist including procurement of material/consumables required - "installation of bulk head on penstock line opening or miv locking for complete arresting water leakages. bulk head to be provided by j&k, pdcl.", "opening of all oil, water and air and grease, pipe lines of turbine and generator.", "installation of erection devices for dismantling / removing of draft tube cone (upper and lower), & runner assembly.", "dismantling of adjusting rings of draft tube, cone.", "dismantling of draft tube upper and the lower, cone.", "installation of bulk head on draft tube opening., bulk head, to be provided by j&k pdcl.", "opening of the supporting plates of regulating rings after disengaging from the connecting rods, of guide vane servomotors.", "dismantling of the existing shaft sleeve, assembly.", "dismantling of guide vane levers, guide vane, links etc.", "dismantling of all the turbine guide bearing, pads and storing them safely.", "decoupling of turbine shaft and the generator, shaft assembly.", "dismantling of all the guide vanes and guide, vane servomotors, etc.", dismantling of all the guide vane bushes from the top cover bush housings. however before their dismantling, diameters of all the pivot bushes shall be measured and recorded., dismantling of the turbine top cover assembly including the lower fixed labyrinth ring., dismantling of the turbine shaft assembly., "dismantling of the existing damaged shaft sleeve, assembly.", dismantling of all the guide vane bushes from the pivot ring assembly. however before their dismantling, diameters of all the pivot bushes shall be measured and recorded., "inspection of all the dismantled studs, dowels, bolts/ nuts, pins to identify their replacement by, new ones.", dismantling of pivot ring assembly., post dismantling activities, "balancing of rotor assembly conducting the impedance measurement of all the rotor pole coils followed by their polarity testing., completing the jointing of all the assembled/ tested rotor poles involving soldering, breezing and proper insulation. measurement of the insulation resistance of the rotor pole winding to check its final healthiness. balancing of rotor assembly including providing of weight", "balancing of rotor assembly including providing, of weight", "thorough cleaning of the complete generator stator core all along its periphery both inside as well as from its outside surface using a suitable, cleaning agent viz mto.", "thorough cleaning of all oil coolers along with, water tubes and pressure testing of the same with assembly.", "thorough cleaning of all turbine guide bearing, oil coolers and pressure testing of the same and assembly.", "thorough cleaning of the complete generator stator winding overhang portions all along its periphery on both its connection-end side as well as from its non-connection end side using a, suitable cleaning agent viz mto.", "blue-matching of rebabitated pads for checking quality of, rebabitating with a surface plate.", "blue-matching of thrust collat bottom surface with the top insulation surface for thrust runner, disc at service bay.", "blue-matching of rebabitated pads with the, coresponding journal surface on the thrust collar assembly.", blue-matching of rebabitated pads with the coresponding journal surface on the lower bearing journal on the generator shaft assembly., polishing of all the turbine guide bearing pads and blue-matching them with the coresponding journal surface on the turbine bearing journal on the turbine shaft assembly., "conducting the dry-out of the generator stator, winding assembly.", measurement of the insulation resistance of the rotor pole winding to check its final healthiness, "conducting the dry-out of the generator rotor, assembly.", boxup activities, assemblies of the top cover assembly in position with replacement of all its old fasteners by new ones which are to be procured., "replacement of 8mm rubber cord by a new, one.", "trial assembly of runner with pivot ring and, measurement of bottom labyrinths clearances.", trial assembly of runner with turbine top cover and measurement of top labyrinth clearances., re-assembly of pivot ring assembly in position., "re-assembly of all guide vanes in the pivot ring, assembly.", "lowering of turbine shaft assembly in the turbine, pit using the erection device.", "re-assembly of all the guide vane bush housings in the top cover and replacement of its damaged fasteners by new ones which are to be, procured", "assembly of regulating ring along with, connecting rods of the guide vane servomotors in the unit.", "lowering of lower bracket assembly along with brake jack assembly in position with all its, fasteners duly tightened.", "lowering of generator rotor assembly in the generator pit, supporting on the jacking pads.", "lowering of upper bracket assembly in position with all its, fasteners duly tightened.", "re-assembly of thrust collar assembly on the generator shaft by shrunk fitting method., checking the vertical movement of thrust collar, assembly.", "reassembly of thrust runner disc assembly, thrust pads, h.s., lubrication system, etc.", "checking of rotational level of generator shaft and correcting, the same", coupling of generator and turbine shaft flanges., "re-assembly of the francis runner assembly and its coupling with turbine shaft using new, coupling bolts & nuts.", "assembly of all associated turbine components viz guide vane servomotors, guide vane lever, & link mechanism.", "carrying out the combined rotational checks of the turbine & generator shafts and correcting the alignment, leveling & equal ioad sharing of, the thrust pads.", "centering of the shaft and setting of bearing clearances in, ugb, lgb & tgb in a concentric manner.", "checking and connecting of all oil pipe lines &, charging of governor.", "bedding & setting of all guide vanes with respect to steel liner, of top cover and lower ring to achieve proper, clearances.", "boxing up all bearings including their oil & water, pipe lines.", "complete assembly of draft tube upper cone, including full tightening of all bolts.", "complete assembly of lower cone with full, tightening of bolts.", "complete assembly of adjusting ring with full, tightening of all the bolts.", "complete assembly of shaft sealing system, including assembly of water pipelines", "complete assembly of oil bath of thrust bearing, with full tightening of bolts.", "assembly of grease pipeline of upper bushes and lower bushes and assembly of water pipe, line of lower bush", "measurement of insulation resistance value of, stator and rotor winding.", "spinning of the machine, dry out and then, synchronizing/ loading of the unit.", "carrying out the dry-out of the generator with windage loss method till the satisfactory levels of ir & the pi values is, achieved.", voltage build-up and subsequent synchronization of the unit followed by loading in steps and checking the unit vibrations at every step till the unit reached the rated load., carrying out the measurement of unit vibrations & dynamic balancing of the unit as required., labyrinth (stationary upper lower), shaft seal (flapper set), "all general purpose consumables, d&h make mo-309 5s welding electrodes, 0-rings, general purpose fasteners, stainless steel shims, insulation paints, etc. required during the, restoration work." for its restoration at ushp-ii, kangan.

Srinagar, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

111 |Bid Value:₹ 1.20 Cr. |EMD:₹ 2.41 Lakh |30-09-2026 13 Days Left|T247 ID-104207462

tender no e 16a/2026 conducting marine borings, soil investigations - tender no. e 16a 2026 conducting marine borings, soil investigations

Mumbai, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

112 |Bid Value:₹ 1.20 Cr. |EMD:₹ 1.50 Lakh |21-09-2026 4 Days Left|T247 ID-103911714

corrigendum : drilling for 1612.5 mtrs 46 no of 300 mm finished dia bore holes including supplying and lowering of 200 mm dia of casing pipe ms erw pipe is 1239 3589 with 6 mm thick for stabilisation purpose and over waterlogged workings on surface by hydropneuma

Talcher, Orissa, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

113 |Bid Value:₹ 1.03 Cr. |EMD:₹ 2.06 Lakh |29-09-2026 12 Days Left|T247 ID-104108725

zone 11a:- joravasan - surat sec:- general repairs & painting, white washing, colourwashing, distempering, polishing etc.in jurisdiction of sse/w/surat between km 250.59 to km 268.89 between sachin (excl) and surat (incl).

Mumbai, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

114 |Bid Value:₹ 99.40 Lakh |EMD:₹ 1.03 Lakh |30-09-2026 13 Days Left|T247 ID-104199734

1. annual contract for ash slurry pipeline work at ntpc and related work from bph pump house to ash bund area.;2. machining of spare parts for id fan as required at bmm 2.;3. supply of numerical protection relay during repair of testing unit 2, group 4.;4. supply of required air regulator at i&c - 2.;5. contract for various auxiliary equipment required at ntpc - and for analysis of hydraulic oil.;6. purchase of p-tube for economizer coil fins at bmm 2.;7. work of re-fixing aph pin rack assembly pins during capital overhaul of bmm 2, group 4.;8. supply of boiler safe direct erect scaffolding system cup lock spares. ( marathi image)

Not Classified, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

115 |Bid Value:₹ 95.02 Lakh |EMD:₹ 1.90 Lakh |29-09-2026 12 Days Left|T247 ID-104108687

zone 15/a : udhna - jalgaon sec.:- general repairs & painting,white washing, colour washing, distempering , polishing etc.in the jurisdiction of sse(w)an between km. 212.482 to km301.470between sindhkheda(excl.) to jalgaon (excl.)

Mumbai, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

116 |Bid Value:₹ 94.86 Lakh |EMD:₹ 1.19 Lakh |19-09-2026 2 Days Left|T247 ID-104016707

custom bid for services - spraying of water through mobile water tanker on siding no-03 and 04 of bhubaneswari ocp bhubaneswari area for a period of 730 days

Angul, Orissa, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

117 |Bid Value:₹ 88.18 Lakh |EMD:₹ 1.77 Lakh |24-09-2026 7 Days Left|T247 ID-102024821

corrigendum : exploratory drilling works of 380 m length (03 nos. holes at 60m each and 01 hole at min 200m) at left and right banks of usmsp at uggeng dam axis

Siang, Arunachal Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

118 |Bid Value:₹ 87.88 Lakh |EMD:₹ 1.76 Lakh |24-09-2026 7 Days Left|T247 ID-101998883

corrigendum : exploratory drilling works of 380m length (03 nos. holes at 60m each and 01 no. hole at min 200m) at left and right banks of usmsp at parong dam axis

Siang, Arunachal Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

119 |Bid Value:₹ 78.11 Lakh |EMD:₹ 97.70 K |21-09-2026 4 Days Left|T247 ID-103862590

custom bid for services - face drilling work by udm machine

Chhindwara, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

120 |Bid Value:₹ 72.00 Lakh |EMD:₹ 1.44 Lakh |18-09-2026 1 Day Left |T247 ID-103124428

corrigendum : minesminerals drilling - surface drilling; non-energy minerals; rotary core drilling

Ranchi, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

289+ Latest Bending Services Tenders

Live Bending Services Tenders 2026

Kothagudem, Telangana, India

Lucknow, Uttar Pradesh, India

Jagatsinghpur, Orissa, India

Chhindwara, Madhya Pradesh, India

Puri, Orissa, India

Udaipur, Rajasthan, India

Jaipur, Rajasthan, India

Angul, Orissa, India

Jharsuguda, Orissa, India

Srinagar, Jammu And Kashmir, India

Mumbai, Maharashtra, India

Talcher, Orissa, India

Mumbai, Maharashtra, India

Not Classified, Maharashtra, India

Mumbai, Maharashtra, India

Angul, Orissa, India

Siang, Arunachal Pradesh, India

Siang, Arunachal Pradesh, India

Chhindwara, Madhya Pradesh, India

Ranchi, Jharkhand, India