629+ Latest Brake Beam Hanger Tenders

Anyone Bidding On Brake Beam Hanger Contracts Relies On Tender247 To Track New Tenders, Rfps, And Rate Contracts For Brake Beam Hanger From Buyers Across Sectors And States. Tenders In This Category Typically Specify Quantity, Technical Or Quality Specifications, Delivery Schedule, And Applicable Quality Or Compliance Standards Relevant To The Item. Tender247 Aggregates Brake Beam Hanger Tenders From Across India, Making It The Fastest Way To Check Who Is Currently Buying Brake Beam Hanger And Under What Terms. Each Brake Beam Hanger Tender Listing Includes The Tender Reference Number, Issuing Organization, Estimated Value, Emd, And Bid Submission Deadline.

Live Brake Beam Hanger Tenders 2026

81 |Bid Value:₹ 100.00 Cr. |EMD:₹ Refer Docs |22-09-2026 5 Days Left|T247 ID-104414163

supply of capital items for establishment of rate contract for a period of one year (from the date of contract establishment-loi date) for the requirement gas turbine frame - seal, combustion (hula), (02) cap-combustion, (03) collar-xfire tube, (04) seal-combustion (hula), (05) gasket-fuel nozzle, (06) washer-fuel nozzle, (07) washer-fuel nozzle, (08) nozzle tip-outer, (09) honey comb-formed 0.12" tx 1" w, (10) valve, stop ratio of cont., (11) seal strip-turb. noz. stg-1, (12) seal strip-turb. noz stg-1, (13) bearing, thrust loaded, (14) bearing, thrust un-loaded, (15) bearing #1 liner assy, (16) bearing #2 liner assy, (17) bearing #3 liner assy, (18) coupling accey. gear, (19) seal comp. rotor aft, (20) diaphrgm set stg-2, (21) diaphrgm set stg-3, (22) gland packing tube, (23) gland packing tube, (24) cableseal low pressure, (25) spring, (26) stud, coupling, (27) nut, self locking, (28) plug, rotor stud, (29) set of cap & liners (dualfuel, 4fl. detectors), (30) thinner for epoxy paint (carboline 890), (31) bolt, shoulder, (32) fuel nozzle, breech loaded, (33) acc coupling hardware kit (bolt), (34) acc. coupling hardware (nut), (35) shock indicator, 5g, (36) shock indicator, 10g, (37) rotor assy, turbine, (38) rotor assy, compressor, (39) rotor hardware, unit, (40) rotor assy, turbine, (41) rotor assy, compressor, (42) tip assy fuel nozzle gas, (43) cone assy fuel nozzle, (44) nozzle spray, (45) plug, trailing edge noz, (46) plate, seal: noz stg 2, (47) cover, (48) cover, (49) cover, (50) spacer, (51) plug turb nozz core-1st stg, (52) cover plate assy, (53) thinner for cement 320 micro braze 320, (54) transition piece - body welded, (55) transition piece - lower half, (56) transition piece - upper half, (57) transition piece - lower half body, (58) transition piece - upper half - body, (59) clamp support t/p bull horn, (60) bolt hex hd 1/2"-13unc x 1.25", (61) fuel nozzle, breech loaded, (62) gasket, metal seal, (63) spring energised c-seal, (64) honey comb 0.188" thk x 1.14" wide, (65) honey comb 0.188" thk x 1.196" wide, (66) honey comb 0.188" thk x 1.199" wide, (67) t pend seal, (68) brg-1 seal, (69) mn&c fuel nozzle set liq. fuel, (70) gasket, blind flange, (71) gasket, cvr sight port, (72) tip assembly, (73) gasket flame detector, (74) case arrgt comb - outer, (75) piping arrgt fuel gas, (76) piping arrgt fuel nozzle purge, (77) piping a ragt fuel oil, (78) chamber arrgt comb, (79) gasket msw nonstd, (80) gasket msw nonstd, (81) gasket msw nonstd, (82) shroud set, turb-1st, (83) brush seal assy, (84) fuel nozzle breech loaded, (85) cone assy fuel nozzle, (86) noz. casting turb stg-1 segment, (87) noz. casting turb stg-3 segment, (88) bucket casting # 2, (89) bucket casting # 3, (90) assy.-plate sealing, (91) c-seal, (92) nozzle segment casting stg-2 turbine, (93) bucket kit, turbine rotor stg #1, (94) bucket kit, turbine rotor stg #2, (95) bucket kit, turbine rotor stg #3, (96) nozzle casting turbine stg1 - clg hole drill - 6581, (97) nozzle casting turbine stg2 - clg hole drill - 6581b, (98) honey comb formed 0.12" thk & 1" w, and (99) honey comb formed 0.146" thk & 1" w.

Hyderabad, Telangana, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
82 |Bid Value:₹ 71.73 Cr. |EMD:₹ 1.43 Cr. |26-09-2026 9 Days Left|T247 ID-104072262

comprehensive annual maintenance contract for axle mounted disc brake system of lhb coaches ( ftrtil make).

Kharagpur, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
83 |Bid Value:₹ 56.16 Cr. |EMD:₹ 1.12 Cr. |28-09-2026 11 Days Left|T247 ID-104071802

annual maintenance contract for m/s. faiveley make axle mounted disc brake system fitted in lhb coaches at carriage workshop, lallaguda, secunderabad.

Lallaguda, Andhra Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
84 |Bid Value:₹ 12.11 Cr. |EMD:₹ 12.11 Lakh |21-09-2026 4 Days Left|T247 ID-98360252

corrigendum : work of re-insulation of generator rotor coils, damper segment of generator rotor unit no. 4, packing, transportation from sgtps ph-ii to firm workshop and vice versa, work of generator rotor repairing for the rectification of rotor earth of 210, sgtps

Umaria, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
85 |Bid Value:₹ 9.27 Cr. |EMD:₹ 18.55 Lakh |22-09-2026 5 Days Left|T247 ID-103471201

corrigendum : design, engineering, manufacturing, supply, installation, testing commissioning of stator core, winding and reinsulation of rotor poles with class f insulation of unit1

Pauri Garhwal, Uttarakhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
86 |Bid Value:₹ 7.33 Cr. |EMD:₹ Refer Docs |17-09-2026 Ending Today|T247 ID-103334617

corrigendum : supply of - clutch disc assy. dia 380 bs 6 , clutch cover assy. dia 380 bs 6 , clutch master cylinder assy. , clutch cover assy. 380 diaphram bs 6 , clutch dics 380d diaphpram 1.75 spl 1.0cm bs 6 , clutch booster-3 spherical end bs 6 , master cylinder bs 6 , clutch disc assy. dia 330 bs-6 3010 , clutch cover assy. 330 3010 , clutch master cylinder dia 25.4 3010 , clutch booster 3010 , clutch plate 3011 , clutch cover assy. 3011 , clutch booster 3011 , clutch master cylinder 3011 - clutch assy bs 6 items | quantity - 10869

Lucknow, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
87 |Bid Value:₹ 7.24 Cr. |EMD:₹ 14.48 Lakh |05-10-2026 18 Days Left|T247 ID-104072223

comprehensive repair/renewal of ccb brake system in 3-phase electric locomotive.

Itarsi, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
88 |Bid Value:₹ 5.59 Cr. |EMD:₹ 11.19 Lakh |22-09-2026 5 Days Left|T247 ID-103649992

'comprehensive repair/renewal of ccb brake system in three phase electric locomotives' at electric loco shed, ghaziabad.

Ghaziabad, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
89 |Bid Value:₹ 2.41 Cr. |EMD:₹ Refer Docs |21-09-2026 4 Days Left|T247 ID-102712257

corrigendum : supply of - split air conditioner, wall mount type (v3) isi marked to is 1391 (part 2) (q2) , ss and sc centre lathe all geared for fitter trade , pillar type drilling machine , drilling machine bench , cut section model for pneumatic components of pneumatic trainer kit , cut-section models for hydraulic components of hydraulic trainer kit , power saw machine hydraulic feed system , ss and sc centre lathe all geared for machinist trade , tool and cutter grinder , drilling machine pillar , radial drill , universal milling machine , surface grinding machine , cylindrical grinder , single door direct cool refrigerator carrying with hfc and hc , frost free refrigerator , three four door refrigerator inverter type , core drill machine , bench drilling machine , window ac , duct able split ac one and half ton , cassette air conditioner , rotary hermetic compressor , deep freezer , display cabinet , water cooler storage type , ice candy plant , air conditioning direct system , package ac , bus ac tutorial model , automatic ice cube mc , storage type water cooler hot and cold , visi cooler , vrf vrv unit with two indoor units , split ac inverter technology , working model of air brake assembly , cut section of cross ply and radial tyres , cut section working model of automatic transmission gear box , demonstration board of mpfi system , drum brake assembly in working condition , front axle rzeeppa joint with stand for dismantling and assembly , tyre and split rim wheel assembly , tube tyre vulcanizing machine , diesel engine six cylinder in running condition , working condition of petrol mpfi engine assembly with fault simulation board , ss and sc centre lathe all geared for machinist grinder , pedestal grinder fitted with coarse and medium grain size grinding wheels , ag 4 grinder , portable drilling machine , simulators for mr mixed reality vr virtual reality , water cooled induction brazing machine , plastic machine with hot air gun , swaging and flooring tool kit 450 tubing , arbor press hand operated 2 ton capacity , automotive diesel smokemeter , diesel engine crdi 4 stroke dismantling and assembling with swivelling stand , drilling machine bench to drill up to 12mm dia along with accessories , grinding machine general purpose de pedestal with 300 mm dia wheels rough and smooth , hydraulic jack hi lift type 3 ton capacity and 5 ton capacity , multi scan tool , working condition of diesel engine crdi 4 stroke engine assembly with fault simulation board - workshop outfit | quantity - 104

Kolkata, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
90 |Bid Value:₹ 1.45 Cr. |EMD:₹ 2.91 Lakh |06-10-2026 19 Days Left|T247 ID-104276098

retrofitment of twin pipe air brake system in existing single pipe wagons in visakhapatnam division for a period of 12 months

Visakhapatnam, Andhra Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
91 |Bid Value:₹ 1.24 Cr. |EMD:₹ 2.48 Lakh |06-10-2026 19 Days Left|T247 ID-104366369

restoration of unit-ist including procurement of material/consumables required - "installation of bulk head on penstock line opening or miv locking for complete arresting water leakages. bulk head to be provided by j&k, pdcl.", "opening of all oil, water and air and grease, pipe lines of turbine and generator.", "installation of erection devices for dismantling / removing of draft tube cone (upper and lower), & runner assembly.", "dismantling of adjusting rings of draft tube, cone.", "dismantling of draft tube upper and the lower, cone.", "installation of bulk head on draft tube opening., bulk head, to be provided by j&k pdcl.", "opening of the supporting plates of regulating rings after disengaging from the connecting rods, of guide vane servomotors.", "dismantling of the existing shaft sleeve, assembly.", "dismantling of guide vane levers, guide vane, links etc.", "dismantling of all the turbine guide bearing, pads and storing them safely.", "decoupling of turbine shaft and the generator, shaft assembly.", "dismantling of all the guide vanes and guide, vane servomotors, etc.", dismantling of all the guide vane bushes from the top cover bush housings. however before their dismantling, diameters of all the pivot bushes shall be measured and recorded., dismantling of the turbine top cover assembly including the lower fixed labyrinth ring., dismantling of the turbine shaft assembly., "dismantling of the existing damaged shaft sleeve, assembly.", dismantling of all the guide vane bushes from the pivot ring assembly. however before their dismantling, diameters of all the pivot bushes shall be measured and recorded., "inspection of all the dismantled studs, dowels, bolts/ nuts, pins to identify their replacement by, new ones.", dismantling of pivot ring assembly., post dismantling activities, "balancing of rotor assembly conducting the impedance measurement of all the rotor pole coils followed by their polarity testing., completing the jointing of all the assembled/ tested rotor poles involving soldering, breezing and proper insulation. measurement of the insulation resistance of the rotor pole winding to check its final healthiness. balancing of rotor assembly including providing of weight", "balancing of rotor assembly including providing, of weight", "thorough cleaning of the complete generator stator core all along its periphery both inside as well as from its outside surface using a suitable, cleaning agent viz mto.", "thorough cleaning of all oil coolers along with, water tubes and pressure testing of the same with assembly.", "thorough cleaning of all turbine guide bearing, oil coolers and pressure testing of the same and assembly.", "thorough cleaning of the complete generator stator winding overhang portions all along its periphery on both its connection-end side as well as from its non-connection end side using a, suitable cleaning agent viz mto.", "blue-matching of rebabitated pads for checking quality of, rebabitating with a surface plate.", "blue-matching of thrust collat bottom surface with the top insulation surface for thrust runner, disc at service bay.", "blue-matching of rebabitated pads with the, coresponding journal surface on the thrust collar assembly.", blue-matching of rebabitated pads with the coresponding journal surface on the lower bearing journal on the generator shaft assembly., polishing of all the turbine guide bearing pads and blue-matching them with the coresponding journal surface on the turbine bearing journal on the turbine shaft assembly., "conducting the dry-out of the generator stator, winding assembly.", measurement of the insulation resistance of the rotor pole winding to check its final healthiness, "conducting the dry-out of the generator rotor, assembly.", boxup activities, assemblies of the top cover assembly in position with replacement of all its old fasteners by new ones which are to be procured., "replacement of 8mm rubber cord by a new, one.", "trial assembly of runner with pivot ring and, measurement of bottom labyrinths clearances.", trial assembly of runner with turbine top cover and measurement of top labyrinth clearances., re-assembly of pivot ring assembly in position., "re-assembly of all guide vanes in the pivot ring, assembly.", "lowering of turbine shaft assembly in the turbine, pit using the erection device.", "re-assembly of all the guide vane bush housings in the top cover and replacement of its damaged fasteners by new ones which are to be, procured", "assembly of regulating ring along with, connecting rods of the guide vane servomotors in the unit.", "lowering of lower bracket assembly along with brake jack assembly in position with all its, fasteners duly tightened.", "lowering of generator rotor assembly in the generator pit, supporting on the jacking pads.", "lowering of upper bracket assembly in position with all its, fasteners duly tightened.", "re-assembly of thrust collar assembly on the generator shaft by shrunk fitting method., checking the vertical movement of thrust collar, assembly.", "reassembly of thrust runner disc assembly, thrust pads, h.s., lubrication system, etc.", "checking of rotational level of generator shaft and correcting, the same", coupling of generator and turbine shaft flanges., "re-assembly of the francis runner assembly and its coupling with turbine shaft using new, coupling bolts & nuts.", "assembly of all associated turbine components viz guide vane servomotors, guide vane lever, & link mechanism.", "carrying out the combined rotational checks of the turbine & generator shafts and correcting the alignment, leveling & equal ioad sharing of, the thrust pads.", "centering of the shaft and setting of bearing clearances in, ugb, lgb & tgb in a concentric manner.", "checking and connecting of all oil pipe lines &, charging of governor.", "bedding & setting of all guide vanes with respect to steel liner, of top cover and lower ring to achieve proper, clearances.", "boxing up all bearings including their oil & water, pipe lines.", "complete assembly of draft tube upper cone, including full tightening of all bolts.", "complete assembly of lower cone with full, tightening of bolts.", "complete assembly of adjusting ring with full, tightening of all the bolts.", "complete assembly of shaft sealing system, including assembly of water pipelines", "complete assembly of oil bath of thrust bearing, with full tightening of bolts.", "assembly of grease pipeline of upper bushes and lower bushes and assembly of water pipe, line of lower bush", "measurement of insulation resistance value of, stator and rotor winding.", "spinning of the machine, dry out and then, synchronizing/ loading of the unit.", "carrying out the dry-out of the generator with windage loss method till the satisfactory levels of ir & the pi values is, achieved.", voltage build-up and subsequent synchronization of the unit followed by loading in steps and checking the unit vibrations at every step till the unit reached the rated load., carrying out the measurement of unit vibrations & dynamic balancing of the unit as required., labyrinth (stationary upper lower), shaft seal (flapper set), "all general purpose consumables, d&h make mo-309 5s welding electrodes, 0-rings, general purpose fasteners, stainless steel shims, insulation paints, etc. required during the, restoration work." for its restoration at ushp-ii, kangan.

Srinagar, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
92 |Bid Value:₹ 1.18 Cr. |EMD:₹ 2.35 Lakh |17-09-2026 Ending Today|T247 ID-103650096

air brake system repair , testing and modification during ss-ii and ss-iii of lhb coaches.

Jhansi, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
93 |Bid Value:₹ 88.06 Lakh |EMD:₹ Refer Docs |21-09-2026 4 Days Left|T247 ID-104386220

repair of 12 mw gas expansion turbine rotor.

Visakhapatnam, Andhra Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
94 |Bid Value:₹ 74.88 Lakh |EMD:₹ Refer Docs |17-09-2026 Ending Today|T247 ID-103842329

corrigendum : supply of - he sector plate assembly for aph 10a and 10b , ce sector plate assembly for aph 10a and 10b , spool assembly of aph 10a and 10b , pin rack and pinion assembly , cold end baskets support gratings , rotor assembly for aph 10b , taper lock bush with adaptor for 5apc gear box of aph- 27vi 74 , seal, complete set for aph a side , seal, complete set for aph b side , axial seal plate assembly of aph 10 a and 10b , by-pass sealing angle arrangement of aph 10a and 10b , bibby resilient coupling type 124-a for aph - spares of air pre heater | quantity - 24

Sonebhadra, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
95 |Bid Value:₹ 30.80 Lakh |EMD:₹ 66.60 K |19-09-2026 2 Days Left|T247 ID-103374683

corrigendum : repair, maintenance, and installation of plant systemsequipments (version 2) - manufacturing unit; sgc 3rd and 4th barrel rotor; service provider

Dibrugarh, Assam, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
96 |Bid Value:₹ 29.03 Lakh |EMD:₹ 29.03 K |23-09-2026 6 Days Left|T247 ID-104166023

i&cadd-jcrdlis-phase-ii-intake pump house- 12.8 mw motor no.2 rotor earth fault rectification at intake pump house under jcrdlis

Not Classified, Telangana, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
97 |Bid Value:₹ 28.61 Lakh |EMD:₹ Refer Docs |21-09-2026 4 Days Left|T247 ID-103607528

supply of - split air conditioner, wall mount type (v3) isi marked to is 1391 (part 2) (q2) , heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle , hammer cross peen with handle , pully puller with 3 legs , bearing puller , hacksaw frame , drill strainless steel twist block , contactor and auxiliary contacts 3 phase 415 volt 25 amp with 2 no and 2 nc , contactor and auxiliary contacts 3 phase 415 volt 32 amp with 2 no and 2 nc , load bank , miniature circuit breaker 16 amp , elcb and rccb 25amps double pole , rheostat , hp mercury vapour lamp , high pressure sodium lamp , low pressure sodium lamp , led 100w , rubber mat , digital multi meter , alternative current voltmeter moving iron analog , kilo wattmeter analog portable type housed in bakelite case , 3 point direct current starte , 4 point direct current starter , ac starters forward star delta starter , electric induction plate , dc power supply regulated short circuit protected voltage and current adjustable , battery charger voltage and current adjustable with display for voltage current , current transformer , hand drill machine electric with hammer action 13mm , multiple output dc power supply , digital storage oscilloscope , function generator , autotransformer , analog component trainer , milli ammeter dc , universal ic tester handheld digital ic tester , wireless communication modules for interfacing with microcontrollers , electronics maintenance work station , microcontroller atmega328 core 8051 ready to run programmer for atmega328p , application kits for microcontrollers atmega328 , seven segment dpm trainer , lcd based dpm , smps 5v 10a 50w , ups 700va , smart phone of different make , french curve set of three , scale plastic 24inch , leg shaper wooden , waste bin big 30 litre , pattern punch plastic , pattern notcher metal , pattern hanging stand metal , stand for hanging dresses metal , electric automatic steam press , sewing machine single needle lock stitch industrial model , double needle lockstitch machine industrial model , button hole machine , dummy kid different sizes , cast iron globe valve , cast iron sluice gate valve , slip on forged steel flange 150nb , gas welding table with positioner with fire bricks , diesel engine crdi 4 stroke , mpfi petrol engine , tandem master cylinder with booster , cut section model of mock layout of a motor car , spring tension tester - workshop outfit | quantity - 230

South 24 Parganas, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
98 |Bid Value:₹ 27.41 Lakh |EMD:₹ 54.80 K |25-09-2026 8 Days Left|T247 ID-104014397

stripping and fitment of air brake components in all kinds of wagons at wagon repair shop, w. c. rly., kota for a period of 12 months.

Kota, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
99 |Bid Value:₹ 24.98 Lakh |EMD:₹ 50.00 K |17-09-2026 Ending Today|T247 ID-103764478

brake fitting bogie general arrangement as per drawing & quality requirements to drg. no. 1268820 lhb coaches with air spring at secondary suspension and br coach bogies & fitment and air leakage testing of all brake piping arrangement on lhb bogies of br coaches as per drg no. lw36005 alt 'a'.

Kapurthala, Punjab, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
100 |Bid Value:₹ 16.90 Lakh |EMD:₹ Refer Docs |18-09-2026 1 Day Left |T247 ID-104187373

complete vpi re winding of the 3.3 kv,1004 kw, 988 rpm, frame: 1la7804-6, type: scim, make: m/s bhel ht motor stator with class f insulation, dynamic balancing of rotor, bearing housing works, checking of coolers, no-load testing of the motor after assembling, painting, transportation of the motor to and fro from site of unit-2, sdstps for the fy 2026-27

Nellore, Andhra Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
Prev 4 5 6 Next
whatsapp