Latest Earth Tester Tenders 2026

101 |Bid Value:₹ 32.01 Cr. |EMD:₹ 64.01 Lakh |08-10-2026 21 Days Left|T247 ID-104401476

construction of service building, s&t rooms, gate lodge at level crossing, rail/ high level passenger platforms, fencing, extension of minor bridges etc. provision of station name board, including dismantling of existing building structure & fencing, up gradation/ extension of level crossing, construction of limited height subway/ road under bridge in lieu of lc by pushing method of precast box segments under running traffic condition including construction of approaches, provision of height gauges at lhs and l-xings etc. and linking of bg track & turnouts, provision of glued joints & sejs, dismantling of existing track & turnouts, handling, lifting, loading, leading, unloading and spreading of ballast, handling of p.way material including working in bni/ ni period and other allied works at dalel nagar, chodiala, aghwanpur station on lucknow-moradabad-saharanapur section in c/with "longer loops in both direction at dalel nagar & chodiala" and "extension of siding to accommodate full train load" in the jurisdiction of dy ce/c/mb unit on moradabad division

Moradabad, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

102 |Bid Value:₹ 6.78 Cr. |EMD:₹ 13.56 Lakh |18-09-2026 1 Day Left |T247 ID-103764498

open tender for (i) provision of rdso standard height guage at rub nos. 14 ,14a, 16, 528,533, 456,2,655,679,706a,28a,30a,548,560,545,1,48up over asansol division (ii) provision of rdso standard height guage in lieu of old type height guage at 16 nos. of lc gate over asansol division (iii) improvement of drainage system including road repair at rub nos. 533 ,456,2,655,679,706a,545,548,560,28a,30a,1,48up over asansol division .

Asansol, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

103 |Bid Value:₹ 6.00 Cr. |EMD:₹ 1.00 Lakh |17-09-2026 Ending Today|T247 ID-103711615

design, engineering, supply, installation, testing and commissioning of 350 sets of communicable fault passage indicators (fpi) for 33 kv and 11 kv overhead network of ujjain city, along with integration to existing and upcoming scada-dms/adms system - control centre, including 5 years amc and communication infrastructure (sim cards with data plans (valid for 5 years) and one dedicated min. 2 mbps communication link for scada connectivity at ujjain control centre under mppkvvcl indore

Indore, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

104 |Bid Value:₹ 5.68 Cr. |EMD:₹ 11.36 Lakh |25-09-2026 8 Days Left|T247 ID-104276752

construction of railway under bridge below railway line on burji no. 190-7-8 from sehar to chappara in bhiwani district. (reinvite-2) - cost of approaches to under bridge, cost of height guage, harvesting well, cost of rcc drain with grating, cost of rcc drain without grating, cost of raod furniture, cost of electrification, cost road/service road

Bhiwani, Haryana, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

105 |Bid Value:₹ 5.20 Cr. |EMD:₹ 5.20 Lakh |18-09-2026 1 Day Left |T247 ID-104094234

supply of - heavy duty ms pipe , butterfly valve , non return valve , hydrant valve , rrl hose pipe , short branch pipe , supplying and fixing first aid hose reel with ms construction spray painted in post office red , providing and fixing of pressure switch in ms pipe line , supplying and fixing air vessel , terrace pump , supply of industrial cable grade plain coated copper conductor , core cutting holes , indoor type hose box , out door type hose box , pressure gauge complete with all accessories , fire hut , cubical type floor wall mounted dust and vermin proof fabricated , h d p c water storage tank for terrace tank , cabling for pump complete with base saddle lugs ferrule laid in ground - custom bid of downcomer and complete fire fighting system | quantity - 22776

Etawah, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

106 |Bid Value:₹ 5.08 Cr. |EMD:₹ Refer Docs |22-09-2026 5 Days Left|T247 ID-103970299

supply, installation and commissioning of phasor measurement units(pmus) at lv side for generating transformers(gts),400kv lines and bus bars of the generating units as per cea regulations at yadadri thermal power station (5x800mw), veerlapalem(v),damercherla(m),nalgonda dist 508208

Nalgonda, Telangana, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

107 |Bid Value:₹ 2.84 Cr. |EMD:₹ 5.68 Lakh |23-09-2026 6 Days Left|T247 ID-101333101

corrigendum : erss (portable reference standard meter)

Jaipur, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

108 |Bid Value:₹ 2.66 Cr. |EMD:₹ Refer Docs |23-09-2026 6 Days Left|T247 ID-103873613

supply of - automatic distillation apparatus , automatic pour point and cloud point apparatus , kinematic viscometer - | quantity - 5

Duliajan, Assam, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

109 |Bid Value:₹ 2.48 Cr. |EMD:₹ 4.96 Lakh |18-09-2026 1 Day Left |T247 ID-103734419

repairs & maintenance of height gauge from msd- mm chord, vdlr - jnj & cla- tmby section under aden (m) mnkd.

Mumbai, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

110 |Bid Value:₹ 2.42 Cr. |EMD:₹ Refer Docs |21-09-2026 4 Days Left|T247 ID-103276303

corrigendum : supply of - grease gun as per is 7794 (q4) , arbor press hand operated,2 ton capacity , auto level with all accessories , automatic,ice cube machine , bus ac tutorial model , capacitance,level indicator , car ac tutorial model , car jet washer with,standard accessories , connecting rod alignment fixture ,,current meter , cut section of 4 or 6 cylinder diesel engine,with moving condition to show momentum of internal parts ,,dgps latest version , diesel engine crdi 4 stroke,dismantling and assembling with swivelling stand , diesel,engine running condition stationary type , diesel engine six,cylinder in running condition , different type of engine,bearing model , display cabinet , drill machine pillar type,motorized , drilling machine pillar type , dumpy level , echo,sounder , electric assisted power steering , electrical test,bench , electrode drying oven , ev charger , fuel injection,test bench for calibration of fuel pump , functional,experiment model of different type of sensors , geometrical,models wooden plastic , hand gps latest version , hand,shear universal , home theatre system , hot water funnel,with thermometer , injector multi hole type pintle type ,,internet of things explorer , lathe tool room ss and sc all,geared type with minimum specification as with dro z and,x axis , lcd tv 21 inch , led lighting system , led tv,trainer kit , marking table ci with mild steel stand ,,metering pump , nutch filter , pillar electric drill machine ,,planimeter , plastic welding machine with hot air gun ,,power drill machine , prismatic compass , radiator cut,section-cross flow , radiator cut section-down flow ,,radiator pressure cap , redwood viscometer , rotary drum,drier , screw pump , sedimentation equipment , shaded,pole motor , sight glass level indicator , sparkler filter , split,ac , split ac inverter technology , ss and sc centre lathe,all geared , starter motor axial type pre engagement type,and co axial type , storage type water cooler hot and cold,, telescopic alidade , three four door refrigerator inverter,type , thyristor igbt controlled vvvf ac motor drive with,control panel , tinnmans shear , total station , transit,theodolite with stand with all accessories , turbocharger cut,sectional view , ultrasonic injection cleaning equipment ,,universal tool and cutter grinder , vrf vrv ac unit , water,cooled induction welding brazing machine. , water cooler,storage type , water dispenser bubble type hot and cold ,,water pump for dismantling and assembling , wireless,communication modules for interfacing with,microcontrollers rfid card reader finger print zigbee gps,gsm bluetooth wifi , working condition of diesel engine,crdi 4 stroke engine assembly with fault simulation board ,,working condition of ev electric vehicle car , apparatus for,measurement of thermal conductivity of good and bad,conductors , air blow gun with standard accessories , air,ratchet with standard accessories , analog component,trainer , angle truing attachment for surface grinding,machine , apparatus for measurement of coefficient of,expansion thermal of solid and liquid , apparatus for,measurement of co-efficient of expansionthermal of solid,pulinger s apparatus , automatic reverse forward starter ,,autotransformer , belt tensioner gauge , bench lever shears,, bench vice , binocular , boiling point and melting point,apnaratus , bourdon tube c type pressure gauge , box,sextant , cable straight jointing kit , calculator scientific,non programmable , capsule type pressure gauge , cell,phone power source with charger chords for different cell,phones , chromatographic equipment , compression testing,gauge suitable for diesel engine with standard accessories ,,computing scales five hectares , computing scales two,hectares , condenser for distillation lebig , cork press , dc,regulated variable programmable dc power supply , digital,viscometer , digital and analog bread board trainer ,,digital balance 200 gm , digital balance 10 kg , digital ic,tester , digital ic trainer , digital micrometer outside ,,dimmer starter , discrete component trainer basic,electronics trainer , dmx controller , dual dc regulated,power supply , dusk and dawn switch , electro magnetic,relay with control panel a cut out relays b over current c,under voltage , engineers stethoscope , ev charger home 1,phase input , ev charge, 3 phase input , fibre glass tape ,,fuel injection pump dismantling tool kit universal vice , fuel,injection pump ve pump distributor fuel rotary pump dpc,pumps along with special tools and accessories , growler,armature , gunter s chain , hand reamers adjustable ,,height indicators , hollow punch set of seven pieces ,,hydraulic crimping tool for ug cable crimping with bits ,,hydraulic jack hi lift type 3 ton capacity and 5 ton capacity,, impulse relay , indexing head with motorized for tool and,cutter grinding machine , injector cleaning unit , injector,testing set hand tester , insulators including hardware,fitting , inverter with battery , land measuring chain , lcd,based dpm , lcr meter digital handheld , leveling staff ,,levelling staff , liquid penetrate inspection kit , machine,vice , magnet bar for magnetizing through compass needles,, magnetic flux meter , metal cross staff box type , mppt,based charge controller , multi scan tool with oscilloscope ,,multiangle magnetic clamp set , offset rod , oil pump for,dismantling and assembling , pen knife , ph meter digital ,,piston ring groove cleaner , plane table , plane table with,stand accessories and water proofing cover , pneumatic,rivet gun with standard accessories , radius truing,attachment for cylindrical external grinding machine ,,railway curves , ranging rod , ranging rod wooden fitted,iron shoe , rechargeable battery , redwood viscometer ,,rivet sets snap and dolly combined , scale card board ,,scissors , searles apparatus for youngs modulus , seven,segment dpm trainer , smart meter with overload,overcurrent tempering magnetic interference protection ,,smart phones of different make android or windows , smps,of different make , solar panel with battery , spring tension,tester , static balancing stand for grinding wheel , steel,arrow wooden peg wooden mallet hammer , straight edge,gauge 2 ft , straight edge gauge 4 ft , stud remover with,socket handle , survey plotting scale , surveyor s umbrella ,,tachometer , taper mandrel , temperature gauge with,sensor , thermocouple , thermostat , tin smiths bench,folder 600 x 1.6 mm , tooth rest , tracing board with lamp,, trammel , tweezers bend tip , tyre pressure gauge with,holding nipple , universal machine vice for grinding. ,,universal puller for removing pulleys bearings , verniner,height gauges , water baths 6 places electrically heated ,,whetstones bridge,workshop outfit| quantity - 526

Hooghly, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

111 |Bid Value:₹ 2.06 Cr. |EMD:₹ 4.12 Lakh |23-09-2026 6 Days Left|T247 ID-103927419

pre & post tamping track measurements using portable track geometry measurement trolley system similar to trimble gedo vorsys trolley system for design mode tamping on all lines in nagpur division.

Nagpur, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

112 |Bid Value:₹ 1.99 Cr. |EMD:₹ 3.99 Lakh |24-09-2026 7 Days Left|T247 ID-104190330

for supply and installation of noncommunicable fault passage indicator on 33 kv and all 11 kv feeder in edsd, raisi under electricity distribution division, laksar, haridwar under capital(si) head.

Haridwar, Uttarakhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

113 |Bid Value:₹ 1.94 Cr. |EMD:₹ 3.88 Lakh |24-09-2026 7 Days Left|T247 ID-104190305

for supply and installation of non communicable fault passage indicator on 33 kv and all 11 kv feeder in edsd, bhattipur under electricity distribution division, laksar, haridwar under capital(si) head.

Haridwar, Uttarakhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

114 |Bid Value:₹ 1.84 Cr. |EMD:₹ 3.67 Lakh |24-09-2026 7 Days Left|T247 ID-103764461

(i) construction of boundary wall for newly constructed quarters at antagarh. (ii)improvement of road surface, fencing, height gauge, gate goomty and toilets etc. at level crossing under jurisdiction of den/ii/raipur.(iii)standardization of sand hump, dead ends and trolley refuge under the jurisdiction of den/ii/raipur.

Raipur, Chhattisgarh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

115 |Bid Value:₹ 1.29 Cr. |EMD:₹ Refer Docs |23-09-2026 6 Days Left|T247 ID-103952661

repair jobs in twin table cars, rail changing, mom, l&t stands, radialpart, dummy bar conveyors, gas cutting machines(gcm) etc. and other equipments of cc machines in ccd/sms-1: 1. twin table car rail track repair/replacement: dismantling of damaged rail, repair of pedestal supports, erection of new rail, and alignment of rail w.r.t. existing rail, welding of joints. 2. twin table car mast dismantling, repair/replacement: dismantling, fabrication, erection of mast. dismantling of damaged mast, removal of damaged portion of mast, fabrication, welding of support and bracing pipes, erection of mast, adjustment of tie rod. 3. twin table car current collector dismantling, repair/erection: fabrication and erection of current collector. dismantling of damaged current collector, fabrication of current collector frame, removal and reconditioning of guide rollers, fixing of guide rollers, erection of current collector, and connection of mast. 4. twin table car wheel changing: dismantling of drive gear box and wheel, fixing of new wheel assembly, erection of drive gear box in case of drive wheel changing, lubrication of the wheel. 5. twin table car lt/ct drives repair/re-conditioning: dismantling of lt/ct gear boxes, changing of internals, re-conditioning/changing of couplings. 6. twin table car rollers bearing/bush changing/re-conditioning: removal of damaged bearings, fixing of bush/bearing rollers, fixing of bearing covers. 7. twin table car apron plate repair/replacement: removal of damaged apron plates, fixing of plates/repair of plates. 8. twin table cart: removal of rollers along with bearing housing, erection of new rollers along with bearing housing, alignment of roller coupling, alignment of drive gear boxes w.r.t bevel gear boxes, alignment of rollers w.r.t machine roller tables and hfl roller tables. 9. radial part: repositioning of tk stand in position, alignment and bolt tightening. 10. spindle fixing and spindle pad changing: fixing of spindle, locking the spindle in position, change of spindle pads if required. 11. radial part: checking of radial alignment with template and rectification. 12. radial part - repair/repositioning/replacement of tk tie rod: repositioning of dislocated tie-rod/removal of damaged tie-rod and fixing of tie-rod and locking. 13. tk stand base repair in ccms: removal of damaged base plate, preparation of base, preparation of new base plate. fixing the new base plate and welding the base plate complete. 14. tk1 guide repair in ccms: removal of damaged guide. preparation of guide plate as per curvature. fixing the new guide plate and welding the guide plate complete. 15. mom "c" frame repair in ccm#2: setting pads changing, setting pads shims changing, mould adjustment jacking plates changing, mould location plates changing, swing bolts changing, tee bolt changing, water leak arresting, any welding/cutting works on c frame, all bolts tightening. 16. ccm#2 radius correction: assembling of 12mt template, checking of radial alignment with template and rectification of strand. checking of template with master template. dismantling of template and put the template in designated place roller tables. 17. mom c frame leveling: checking of mom c frame leveling with straight edge and rectification. 18. repair/change of idle roller stands (small) in gega gas-cutting machines: removal of damaged idle roller assembly, reconditioning of bearing blocks, greasing, fixing back of idle roller assemblies. 19. repair of water cooled beams in gcms: fabrication/repair of damaged portion of water-cooled beams, cleaning/changing of chocked portions of water-cooled beams, flushing of beams, water testing of beams. 20. repair of idle roller stands (big) in gcms: dismantling of bearing blocks of idle roller stands, repair/change/rotation of roller as per requirement, assembly of bearing blocks, greasing and alignment. 21. change of idle roller stands (big) in gcms: dismantling of idle roller stand assembly, cleaning of foundation by gas-cutting and lancing, erection of new idle roller stand, connection of grease and water lines, alignment with assembling of 12mt. template, checking of radial alignment with template and rectification of strand. 22. fabrication/repair/change of lt strikers: dismantling of damaged lt striker, fabrication/repair of striker as per requirement, testing of striker and adjustment. 23. repair/replacement of pipelines-dn-15: isolation of pipelines from gases, purging of pipelines with inert gas, repair/fabrication of damaged pipelines of all gases, flushing of repaired pipelines, testing for leakages and opening of isolation valves. 24. repair/replacement of pipelines-dn-20: isolation of pipelines from gases, purging of pipelines with inert gas, repair/fabrication of damaged pipelines of all gases, flushing of repaired pipelines, testing for leakages and opening of isolation valves. 25. repair/replacement of pipelines-dn-25: isolation of pipelines from gases, purging of pipelines with inert gas, repair/fabrication of damaged pipelines of all gases, flushing of repaired pipelines, testing for leakages and opening of isolation valves. 26. tundish heating gear box repairs: dismantling, repair/bearing changing re-fixing of gearbox. 27. tundish heating system tie rod fixing/repairs: repair of tie-rod, welding of crank bush and connection to gearbox. 28. tundish car copy roller guide repairs: repair/fabrication and welding of copy roller guides. 29. tundish car hump repairs: dismantling and repositioning/re-conditioning of tundish car humps. 30. mould table top: cleaning of mould table top of mould oscillating mechanism (mom) from metal jam by gas cutting. replacing the damaged mould fixing bolts, mould adjustment bolts and eye bolts. 31. jam cleaning below mom: removing the bunker plate below the oscillating table and cleaning the metal jams below the mould table and oscillating lever. fixing back the plate after cleaning and ensuring that the oscillation is smooth. 32. dismantling, repair, reconditioning, erection of mom c-frame: dismantling of mom top link, arresting of counter weight link, dismantling of c-frame, repair of c-frame, dismantling of c-frame water connections, re-conditioning/replacement of bottom link shaft, fixing of c-frame, fixing of top link, connection of water lines and alignment of cframe with respect to level and machine axis using mould and section ethelons. 33. repair, alignment of c-frames w.r.t. sections: checking of mould c-frame with respect to axis of the strand, rectification of location of mould bed bolts blocks, straightening of c-frame arms, leveling of c-frame with respect to machine radius, arresting of water leakages. 34. dismantling, repair, erection of scz water seat block: dismantling of scz water seat block and removal of metal jam, repair of the block, removal of ms pipelines/joints if any and replacement with ss pipelines/joints, fixing of water seat block. 35. repair jobs on mom drive gear box: reconditioning of mom drive gear box including change of internals. alignment of drive frame with spirit level and master level. 36. repair jobs on eccentric unit: eccentric tie rod adjustment for smooth oscillation of the mechanism. adjustment of counter weights. 37. change of mom eccentric unit: dismantling of defective eccentric unit, fixing of reconditioned/repaired eccentric unit and adjustment of oscillation. 38. change of mom top link: arresting of mould c-frame, dismantling of mom top link, fixing of new top link, leveling of c-frame with respect to machine radius. 39. quarterly repair/rectification jobs on l&t stand: cleaning of all weld joints of turret area, checking of housing top flange bolts for looseness and measurement of gap with feeler gauge in presence of site engineer, cleaning of drive gear box area, checking of drive gear box flange bolts surface for any gap with feeler gauge, thorough cleaning of axle retaining covers of top and bottom links and measurement of clearances, rectifications as suggested by the engineer. 40. change of drive gear box of l&t stand: dismantling of drive room, dismantling of drive motor frames and motors, dismantling of gearbox, erection and alignment of drive motors and frames, erection of drive gearbox, erection of drive room and welding. 41. half yearly repair/rectification jobs on l&t stand: removal of floor covers, cleaning of all weld joints thoroughly for dp test, providing assistance for dp test as instructed by the engineer, rectification of defects noticed in dp test. 42. annual repair/rectification jobs on l&t stand: dismantling of floor covers, thorough cleaning of all weld joints of l&t stand, providing assistance for dp test, rectification of defects noticed in dp test, load test of l&t stand, measurement of deflection readings as per the instructions of the engineer, measurements of clearances of column foundation bolts, thermal tightening of column foundation bolts as per the instructions of the engineer, fixing of floor covers. 43. repair/change of l&t drive room: dismantling of drive room structures, fabrication/repair of drive room structures, erection, alignment and welding of drive room structures. 44. replacement of seals of l&t rotary joint: dismantling of rotary joint, dismantling of seals, thorough cleaning, reconditioning/repair of rotary joint, fixing of seals as per the sequence and as suggested by the site engineer. 45. repair of dummy bar conveyers: maintenance of all 24 dummy bar conveyors of ccm-1 to ccm-6 by carrying out the following jobs to keep the conveyors in working condition, replacing damaged conveyors along with parking rollers, grip assembly, replacing the damaged rope, repairing the hook carriage, rectification of front and back guides, channels of conveyor. repair of horizontal guides and other structural repair of conveyor, reposition of conveyor carriage assembly in support guides in case of any problem, removing the dummy bar if it is defective or for carrying out the repair of conveyor, repair/replacement of vertical guide channels, fabrication of small parts like hook carriage tie rod, stopper etc. 46. mom lever unit bearing changing: jobs including boq no 32 and boq no 33 removal of counter weights, mom lever unit bearing changing on both sides by removing plumber blocks and fixing the same along with counter weights. also oscillation checking and rectification. 47. tk1/tk spline welding: tk1/tk stands igb spline housing and welding both in position and removed stands if required. 48. igb changing for tk stand: igb removal from the stand and fixing, orientation changing of igb if required. 49. igb locking: tk1/tk stands igb locking with bracket along with spline welding to stand. 50. idle roller stand roller changing: removal of damaged roller, cleaning, new roller fixing. 51. ccm#2 mould supporting frame top link changing/revisioning: removal of top link, revision/changing of bearings in the top link, fixing of top link in the position. 52. ccm#2 mould supporting frame bottom shaft bearing changing/revisioning: removal of top link, mould c-frame, revisioning/changing of bearings/shaft, fixing of shafts, c-frame and top link. 53. total changing/revisioning of ccm#2 mould supporting frame: removal of mould c-frame, changing/revisioning of mould water seats, arresting water leakages from frame, revisioning of leveling pads, fixing of revisioned or spare stand. 54. total changing/revisioning of ccm#2 section supporting roller: removal of damaged supporting roller, fixing of spare/revisioned supporting roller. 55. total checking of ccm#2 alignment with section and mould ethelon: placement of mould ethelon, placement of section ethelon, checking the total radius with template from mould c-frame to n1, removal of both section and mould ethelon, radius correction to be done. 56. periodical maintenance of electric hoist in mom room of ccm: strictly follow the periodical maintenance schedule, gear box oil top-up, greasing of guide and guide wheels, tightening of foundation bolts.

Visakhapatnam, Andhra Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

116 |Bid Value:₹ 92.13 Lakh |EMD:₹ 1.84 Lakh |29-09-2026 12 Days Left|T247 ID-104014415

working of track geometry by pre tamping /post tamping measurement using timble gedo voryss trolley system or similar equipment system under jurisdiction of den/g/varanasi.

Varanasi, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

117 |Bid Value:₹ 90.28 Lakh |EMD:₹ 55.00 K |25-09-2026 8 Days Left|T247 ID-103803280

corrigendum : measuring equipment

Hosur, Tamil Nadu, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

118 |Bid Value:₹ 60.00 Lakh |EMD:₹ Refer Docs |22-09-2026 5 Days Left|T247 ID-103895415

pyro sequencer

Thiruvananthapuram, Kerala, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

119 |Bid Value:₹ 59.43 Lakh |EMD:₹ 1.19 Lakh |25-09-2026 8 Days Left|T247 ID-104014344

repair and improvement of height gauge at various lhs and provision of fencing in db-arpr section.

Vadodara, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

120 |Bid Value:₹ 59.29 Lakh |EMD:₹ 1.19 Lakh |06-10-2026 19 Days Left|T247 ID-104339107

supply of - capacitance and tan delta measurement kit (v2) (q3) - | quantity - 1

Uri, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

719+ Latest Earth Tester Tenders

Live Earth Tester Tenders 2026

Moradabad, Uttar Pradesh, India

Asansol, West Bengal, India

Indore, Madhya Pradesh, India

Bhiwani, Haryana, India

Etawah, Uttar Pradesh, India

Nalgonda, Telangana, India

Jaipur, Rajasthan, India

Duliajan, Assam, India

Mumbai, Maharashtra, India

Hooghly, West Bengal, India

Nagpur, Maharashtra, India

Haridwar, Uttarakhand, India

Haridwar, Uttarakhand, India

Raipur, Chhattisgarh, India

Visakhapatnam, Andhra Pradesh, India

Varanasi, Uttar Pradesh, India

Hosur, Tamil Nadu, India

Thiruvananthapuram, Kerala, India

Vadodara, Gujarat, India

Uri, Jammu And Kashmir, India