FILTERS
maintenance and dismentalling work of overhead ht/lt line, tc & ht/lt ab cable under modasa-r sub division under modasa division
View Insights
erection and dismentalling work of overhead ht/lt line, tc & ht/lt ab cable under modasa-r2 sub division under modasa division
p/s to 83 no 169 hp irri. pump connection at various villages under pendra (r) d/c of (o&m) dn. pendra road through (project) dn. mungeli.
laying of underground cable, fault finding & rectification work at various sdn under idar do.
tender for laying of underground cable, fault finding & rectification work at various sdn under idar do, ugvcl
annual rate contract tender for maintenance, of ht/lt line & tc work under deshotar s/dn, idar do, ugvcl
annual rate contract tender for maintenance, of ht/lt line & tc work under khedma s/dn, idar do, ugvcl
survey, design, supply, installation, commission and maintenance of solar pv system for 5 years as a rooftop at control room terrace of various substation of navsari and vapi am division as an extension of capacity of existing solar roof top
special repair replacement of existing unsv bollards,gate pillar lights and connected misc items of various unit locations at borarupak-i and special repair/replacement of existing unsv solar security lights of various unit locations at borarupak-
providing compound wall, walking track, gym play equipment, badminton court at gollavillivanipalem park in ward.no.95 of pendurthi zone area of gvmc. - earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational incidentalm labour charges such as shoring, sheeting, planking, struting, etc, complete for finished item of work including seigniorage exclduing dewatering charges etc, per ss - 20 b (apss 308), filling with stone crusher dust in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, seignorage charges, hire charges of t & p etc., complete for finished item of work., plain cement concrete (1:4:8) proportion (cement: fine aggregate: coarse aggregate) using 40mm size hard broken granite (is383, 1970) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, mixing concrete in concrete mixer including all materials, all operational, incidental, and labour charges such as laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work., brick masonry in cm (1:8) with with flyash cement solid bricks of size 290x225x140mm having a compression test not less than 50 kg/sqcm including cost and conveyance of all materials, seigniorage charges and labour charges for mixing of mortor watering curing etc. complete., plain cement concrete grade m20 - nominal mix (cement fine aggregate: coarse aggregatge) corresponding to table 9 of is 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including seignorage chargers, sales & other taxes on all materials including all operational, incidental and labour charges such as machines mixing, laying concrete, curing etc., complete as per ss, plastering in cement mortar (1:3) 12mm thick watering for curing including cost of materials, scafolding and watering and conveyance of all materials and all labour charges etc., complete as per ss and as directed by the engineer - in - charge., painting two coats with acrylic exterior emulsion paint having voc (volatile organic compound ) content less than 50 grams/ liter over plastered surface for external walls including cost & conveyance of all materials and all labour charges etc complete as per ss and as directed by the department officers., supply fabrication of steel (structural) and erection of ms space frame structure with supplyting, fabricating installing the roof stucture in structural steel with necessary curvature as including cost and conveyaance, watering, tamping including all labour charges, roofing with pre-painted galvalume trapezoidal profile roofing sheets with 0.50mm thickness, coating: alu-zinc coating az150 gsm. tensile strength: 550 mpa. paint coating: regular modified polyester painting. painting thickness (top): 18 to 20 microns, (bottom): 5 to 7 microns. sheet width: 1.020, length: maximum 12 meters with regular range colours - for dome cap type roofing fixed over the ready made steel roof structure having a bottom diametre of 36.4 metres and rise of 4.0 metres., flooring with high polished granite slabs ... mm thick other than black set over base coat of cement mortar (1:4), 20 mm thick over cc bed already laid or rcc roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tilesetc., complete, including seigniorage charges, labour charges for dressing of, formation of 150 mm thick (consolidated) walking track layer using red earth@60%,crusher dust@30% & saw dust@10% mixed thoroughly homogeneous and spreading to even surface and consolidation with hand roller and watering etc.complete finished item of work as per instructions of the department.true to uniform gradients to the possible extent., providing rcc well rings for 1.2m x 0.30m including cost and conveyaance, watering, tamping including all labour charges etc., complete as per ss and as directed by the engineer - in - charge., supply, delivery and fixing of badminton court poles and volley ball court poles including all labour charges etc., complete as per ss and as directed by the engineer - in - charge., supply, delivery and fixing of badminton court and volley ball court nylon nets including all labour charges etc., complete as per ss and as directed by the engineer - in - charge., providing and laying of interlocking concrete block pavements of glass fibre reinforced concrete pavers of size 225 x 175 mm and thickness of not less than 60mm heavy duty conforming to is 15658:2006 including cost & conveyance of all materials and all labour charges etc complete as per ss and as directed by the department officers., "malty activity play system ( special ), descriptions, ? product area : 32ft x 19ft, ? safe play area : 21ft x 42 ft, ? age group: 5-14 yrs., ? friends at a time : 15 to 18, ? platform height : 3 ft,5ft & 7f", "net rock climber 2.1 metres( pgsl 30 ), in this net rock climber pad: rock climber 7ft. pad made from fibber reinforced plastic, (frp) attached to the angular frame. the pad is provided with rock shaped part, ergonomically spaced in zigzag manner for climbing act.", "twindler go round( pgmr 01), railings: the four railings made from 15nb galvanized pipe conforming to is 1239(part, 1):1979 fixed to frp platform at one end and the other end fixed to the platform frame., platform: twindler mgr platform made from gi coated framed structure mated to fibre, reinforced plastic over the top to form a specially designed curved platform", "single board abs with centre pipe & prime, stand sleeve shall be minimum of 100mm nb dia of thickness not less than 5.00mm,footrest support & sit up board support pipe shall be minimum of 50mm nb dia of thickness not less than 4.1mm, handle frame & seat frame support shall be minimum of 24mm nb die of thickness not less than 3.6mm & connecting link pipes shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade with hot dipped galvanised with minimum of 60 microns zinc dipped joint with robotic welded. sit up board made with high quality frp / ss304 perforated material. all pipes shall be uniformly powder coated up to minimum 90 microns hickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed steel for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be 750mm deep with minimum of 100mm nb dia supported with m.s. all plastic parts should solid poly propylene co-polymer (ppcp) and uv- stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms. with one year warranty.", aero rider with main frame shall be minimum of 100mm nb dia of thickness not less than 5.00mm, handle frame & seat frame shall be minimum of 32mm nb dia of thickness not less than 3.6mm & connecting link pipes shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade with hot dipped galvanised with minimum of 60 microns zinc dipped joint with robotic welded. the handle frame are hinged over 100nb main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. seat s are made with the hdpe sheet of size. all pipes shall be uniformly powder coated up to minimum 90 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be 750mm deep with minimum of 100mm nb dia supported with m.s. angle. all plastic parts should solid poly propylene co-polymer (ppcp) and uv stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms and t. with one year warranty, hand rower with base link pipe shall be minimum of 100mm nb dia of thickness not less than 5.00mm, upper link pipe shall be minimum of 50mm nb dia of thickness not less than 4.1mm & connecting links & handle links pipes shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade with hot dipped galvanised with minimum of 60 microns ionized coated and zinc dipped joint with robotic welded. the handle frame are hinged bearings should be reputed make and press fitted for smooth rotation, and does not require republication i.e., maintenance - free ball bearing. seat rest is made with the lldpe sheet of with uniform bending radius to avoid sharp edges. all pipes shall be uniformly powder coated up to minimum 90 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be 750mm deep with minimum of 100mm nb die supported with m.s. angle the solid poly propylene co-polymer (ppcp) and uv- stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms and. with one year warranty., shoulder exerciser double with prime stand pipe shall be minimum of 100mm nb dia of thickness not less than 5.00mm, handle frame & seat frame shall be minimum of 32mm nb dia of thickness not less than 3.6mm & connecting links shall be minimum of 25mm nb die of thickness not less than 3.60mm are of 'c' class heavy grade make with hot dipped galvanised with minimum of 60 microns zinc dipped joint with robotic welded. the two handle frames are hinged over 100nb prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. seat & back rests are made with the lldpe with uniform bending radius to avoid sharp edges. all pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be 750mm deep with minimum of 100mm nb dia supported with m.s. angle. all plastic parts should solid poly propylene co-polymer (ppcp) and uv- stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms and. with one year warranty, "ovate stepper with prime stand pipe shall be, minimum of 80mm nb dia of thickness not less than 4.50mm, pedal link pipe shall be minimum of 50mm nb dia of thickness not less than 4.1mm, handle frame pipes shall be minimum of 32mm nb dia of thickness not less than 3.60mm and handle grips shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade of with hot dipped galvanised with minimum of 60 microns zinc dipped joint with robotic welded. the pedal frame are hinged over 80nb prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re lubrication i.e., maintenance - free ball bearing. foot rest shall be made of. all pipes shall be uniformly powder coated up to minimum 90 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be 750mm deep with minimum of 100mm nb dia supported with m.s. the all plastic parts should solid poly propylene co-polymer (ppcp) and uv- stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms with one year warranty.", "aerial stroller double with three prime stand pipes shall be minimum of 100mm nb dia of thickness not less than 5.00mm, pedestal frame shall be minimum of 32mm nb dia of thickness not less than, 3.6mm & handle frame shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade make with hot dipped galvanised with minimum of 60 microns zinc dipped joint with robotic welded. the two pedestal frames are hinged over 100nb prime stand pipes with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re- lubrication i.e., maintenance -free ball bearing. all pipes shall be uniformly powder coated up to minimum 90 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be 750mm deep with minimum of 100mm nb dia supported with m.s. angle. all plastic parts should solid poly propylene co-polymer (ppcp) and uv- stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms with one year warranty", "chest press double with prime stand pipe shall be minimum of 100mm nb dia of thickness not less than 5.00mm, handle frame & seat frame shall be minimum of 32mm nb dia of thickness not less than, 3.6mm & connecting links shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade with hot dipped galvanised with minimum of 60 microns ionized coated and zinc dipped joint with robotic welded. the two handle frames are hinged over 100nb prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. seat & back rests are made with the lldpe bending radius to avoid sharp edges. all pipes shall be uniformly powder coated up to minimum 90 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be 750mm deep with minimum of 100mm nb dia supported with m.s. angle 25x25x4mm. poly propylene co-polymer (ppcp) and uv- stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms and to with one year warranty", tripple twister with prime pipe shall be minimum of 100mm nb dia of thickness not less than 5.00mm, standing twister plate support pipe shall be minimum of 80mm nb dia of thickness not less than 4.5mm, bottom frame support shall be minimum of 32mm nb dia of thickness not less than 3.6mm & handle ring shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade with hot dipped galvanised with minimum of 60 microns zinc dipped joint with robotic welded. the twister plate is hinged over 80nb standing pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. all pipes shall be uniformly powder coated up to minimum 90 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed for safety against entrapment, corrosion & water resistant. the foundation pipes with anchoring shall be 750mm deep with minimum of 100mm nb dia supported with m.s. angle. all plastic parts should solid poly propylene co-polymer (ppcp) and uv stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms with one year warranty, fore arm twirl double with centre pipe shall be of minimum 100mm nb dia of thickness not less than 5.00mm, support frame shall be minimum of 32mm nb dia of thickness not less than 3.6mm & tai chi spinner rings shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded with handle knobs are made from high quality nylon material. the rings are hinged over 32nb support frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. all pipes shall be uniformly powder coated up to minimum 90 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed by for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be 750mm deep with minimum of 90mm nb dia supported with m.s. angle. all plastic parts should solid poly propylene co-polymer (ppcp) and uv stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms with one year warranty, sky walker double with main frame shall be minimum of 100mm nb dia of thickness not less than 4.50mm & handle pipes shall be minimum of 25mm nb dia of thickness not less than 3.60mm are of 'c' class heavy grade with hot dipped galvanised with minimum of 60 microns zinc dipped joint with robotic welded with plastic/rubber grips on top end. the handle pipes are hinged over 40nb main frame with the help of especially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e. maintenance - free ball bearing. the handle pipes shall be further extended to the 24mm nb dia on both sides. paired rectangular tubes with four foot rests are linked to main frame. foot rest shall be made of aluminium material - .. all pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. all open ends of pipes, bearings, bushes and base cover shall be closed for safety against entrapment, corrosion & water resistant. the foundation pipe with anchoring shall be deep with minimum of 100mm nb dia supported with m.s. angle the instruction plate of size of ss 304 grade plate with with your company emblem at two sides facing to users with printing. all plastic parts should solid poly propylene co-polymer (ppcp) and uv stabilized should be used. all products of equipment should be manufactured as per en 16630 safety norms with one year warranty, maintenance for open gym equipment for extra one year, providing cement concrete sitting benches including cost and conveyaance, watering, tamping including all labour charges etc., complete as per ss and as directed by the engineer - in - charge., supply and delivery of 250mm pvc casing pipe 6 kg /cmsq (finolex/prince/sudhakar) manufacture, supply and delivery of unplasticised pvcs pipes for potable water supplies conforming to is : 4985/2000 (3rd revision) with bell ends (socket) as per specification in light grey/natural ivory grey/ any other color (except white) inclusive of transportation to the sub-divisional storesanywhere in ap excluding excise duty and sales tax etc., supply and delivery of 180mm pvc casing pipe 6 kg /cmsq (finolex/prince/sudhakar) manufacture, supply and delivery of unplasticised pvcs pipes for potable water supplies conforming to is : 4985/2000 (3rd revision) with bell ends (socket) as per specification in light grey/natural ivory grey/ any other color (except white) inclusive of transportation to the sub-divisional storesanywhere in ap excluding excise duty and sales tax etc., drilling of tube well with down the hole hammer drilling of finished dia meter of 165 mm dia in all formations of soils inclduing insertion of 180mm dia pvc casing pipe of 6kg/cm2 of isi make and providing cap as directed by the departmental officer and transporation of drilling equipment and supporting vehicle etc., complete but excluding cost of pvc casing pipe etc., complete as per ss and as directed by the departmental officers., drilling of tube well with down the hole hammer drilling of finished dia meter of 180 mm dia in all formations of soils inclduing insertion of 250mm dia pvc casing pipe of 6kg/cm2 of isi make and providing cap as directed by the departmental officer and transporation of drilling equipment and supporting vehicle etc., complete but excluding cost of pvc casing pipe etc., complete as per ss and as directed by the departmental officers., supply and transportation of 2.00 hp 25 stage three phase isi submersible motor pumpset suitable for 4" bore well. makes:kirloskar / crompton / texmo / cri / ksb/lubi including cost and conveyance of all materilas and all labour charges etc complete as per ss and as directed by the departmental officers. (elec-5.4.1), labour charges for fixing of submersible motors including cost of all materials and all charges etc complete, supply of 3 core 2.5 sqmm flat copper cable as per is694:1990 for submersible motors.makes: finolex / polycab / havells / v-guard / goldmedal / gm / million / vimal / nandicab / kundan cab/hi-tech including cost and conveyance of all materilas and all labour charges etc complete as per ss and as directed by the departmental officers. (elec-1.6.3) (elec-1.6.3), fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3hp consisting of relay, contactor, starting and running capacitors, voltmeter, ammeter, indicator lamps, mcb , on/off switch including supply and fixing of dol starter of make c&s/l&t/seimens/bch/crompton. complete.,.including cost and conveyance of all materilas and all labour charges etc complete as per ss and as directed by the departmental officers. elec-5.4.16, manufacture, supply, & delivery of hdpe pipes conforming to is 4984 - 1995 including transportation to any where in a.p, including excise duty, sale tax and specials etc., complete. p.e.100 grade 6kg/sqcm (vide page no-86/item no-1 of public health items of cssr - 63 mm diametre complete as per ss and as directed by the departmental officers., manufacture, supply, & delivery of hdpe pipes conforming to is 4984 - 1995 including transportation to any where in a.p, including excise duty, sale tax and specials etc., complete. p.e.100 grade 10kg/sqcm - 63 mm diametre complete as per ss and as directed by the departmental officers., providing independent earthing by exacavating a pit to a depth of 2.25mtr in all soils as per size specified in the data for important equipment with 2.5mtr length 40mm dia 'b' class g.i pipe and 18" dia 3" thick hume pipe ring with r.c.c. slab cover duly providing staggered holes filling with 20kg salt and 40kg charcoal or 40kg bentonite powder from the bottom of the pipe giving earth connection from electrode through g.i strip of 25 x 6mm x 200mm length to be bolted with nut bolts including supply and termination of no.8 g.i.wire from bottm of the pipe with all accessories and labour charges complete, as per is specifications 732/198 and as directed by engineer incharge, making inauguration arrangements including cost of plaque and its fixing , chairs, shamiyanas, gralands and puja samagri and water bottles etc., operations complets as per ss.
xv fc-scheme i ( fy 2023-24) construction of new building for janakeeya arogya kendra thekkenchira palakkad - pcc rcc rrm sbm plastering supply of steel windows and doors grill works fixing factory made door frame and 30 mm shutter of solid pvc aluminium works tile putty painting railing interlock, 3 seater airport chair plumbing and electrical
corrigendum : certain b/r repairs to various e/m installation, view cutter and other misc b/r works at vsn under ge(af) chiloda
corrigendum : repair/replacement of solar water heaters, geysers, elect wiring, mcbs distribution board and allied items in tech and domestic area at af stn ambala under ge (af) ambala
temporary lighting on rental basis at various nigam buildings, national festivals, vip moments and nigam programmes of gwalior and gramin vidhansabha budget year 2026-27 file no. 82/26x6/4
corrigendum : repair and maint of lt ug cables, cable joint and connected items in zone a of tech area under ge (af) tech area agra
corrigendum : comprehensive maintenance of sailors married accn/ otm accn including e/m fittings at ins mandovi under ge (p) navy mandovi - as per tender documents
repair / maint of lt panels, distribution feeder pillar boxes, lt distribution system and other connected works at naval park, amzari park, and allied areas under age e/m no-i of ge(u-i) visakhapatnam
repair / maint of lt panels, distribution feeder pillar boxes, lt distribution system and other connected works at nausenabaugh and allied areas under age e/m no-i of ge(u-i) visakhapatnam
maint of external lt electric supply network in akhnoor mil stn under ge (s) akhnoor.
repair maintenance of internal wiring sub main wiring dbs earthing and other accessories at mo v new site ins viswakarma bv yard nsb wed ctw dsrv namac area ashoka park and adjoining areas under age em of ge nd visakhapatnam
repair maintenance of electric geyser solar water heater for otm md accn and old unserviceable sub main wiring dbs mcbs and aluminium wiring for offrs jcos md accn under age em of ge bengdubi
repair maintenance replacement of street lights, garden lights, building security lights and high mast lights with allied works at rci technical area zone ii eetf elsec cpdc and etc under ge i rnd rci hyderabad
corrigendum : ge/afu-75/2026-27 repair / maintenance / renewal of point wiring, submain wiring and light fitting fixture and connected items at govt. md accn in upper camp and lower camp in af stn udhampur - repair / maintenance / renewal of point wiring, submain wiring and light fitting fixture and connected items at govt. md accn in upper camp and lower camp in af stn udhampur
repair maintenance of internal wiring of installation lt cables lt panel earthing street light alongwith connected electrical items for water supply installation aor of age u water supply no i under ge u water supply delhi cantt 10
corrigendum : repair maintenance replacement of ceiling fan exhaust fan wall fan including other fans for otm md accn and old unserviceable aluminium wiring light fittings mcb dbs earthing etc for d zone c zone e zone md accn including nearby area under age
corrigendum : periodical services to boundry wall, sports complex, map and billets area, e/m installation and misc b/r items at af-i under ge (af) jamnagar no.2
repair/maint of dg sets of different capacities, amf panels security/street light fittings security light poles earthing infrasturuture and allied works at af stn rajokri under ge af gurgaonnnected items at air force station indaur under age e/m arj
repair and replacement of spares to ht vcbs 11 kv sub stations rmus lbs 11 kv oh lines god lightening arrestors ht ug cables lt ug cables control cables lt panels apfc panels lt switch gears and its connected em works at eetf dsst dsp cic mrsam army
ca no.cwe bly/ge (e)/111 of 2026- 2027repair/ replacement maint of external elect repair to ht xlpe cable and misc items repair to transformer alongwith allied services for 33/11 kva distribution system at shahjahanpur cantt under ge (east) bareilly
repair and maint of electric installations, old unsv chain link fencing plinth of transformer, vcb,4/2 pole str and electric supply installation, and allied work under ge (west) jabalpur
repair/maint to servo stabilizer, ups/inverters and other e/m equipments at aor of command hqs and other locations under ge (utilities) udhampur
repair/maintenance of dg sets, certain eqpts, cleaning of oh tanks, ug sumps, open well and repairs to mes installations at rms dholpur
repair/replacement of internal wiring at east side lehl marg under ge (s) binnaguri - as per tender docus
repair/maintenance of ht/lt switch gears, panels,transformers, cables and connected works at dmde area,vvra,sera and ce rnd area under age e/m
repair/replacment of existing copper chemical,gi earthing and lighting conductors at technical building at dmrl and atc devatallagutta under ge(i) rnd kanchanbagh,hyderabad
8826/token-89/2026-27 - repair/ replacement of gi / ci fitting, bathroom fixtures, common area repairs in 48 mvh, karan vihar and b sqn 61 cav in the area of age b/r-i including petty repair of e/m works including daily maint complaints at rr colony (250 dus), uri enclave
repair/ maint of internal light fittings, wiring, distribution boards, ceiling/ exhaust fans and cooling appliances at dmde area sera, vvra, transit mess and ce rnd area under age e/m kanchanbagh, hyderabad
repair/ maintenance of service cables, building security lights, sub main wiring of high rise bldgs and replacement of building electric panels and other connected works at rs colaba under ge (nw) navy nagar, colaba, mumbai
petty repair for attending day to day em external water supply treated water supply stp complaint at rangpuri and repair maint of fire fighting misc works and electrical complaints for pump house fire fighting panel and connected area in the area o
repair/ replacement of lt electric supply, distribution network of various otm bldgs and replacement of various under water lights including comprehensive maintenance of ev charging station at navy nagar, colaba, mumbai
rewiring, geysers, replastering, retiling and all doors and window replacement of bldg no p-121/09 to p-121/12 and spl repair of bldg no t-267 of lt regt at nams
e- tender for labour and errection work of ht/lt lines and transformer in various scheme at danta rec sub division under palanpur division-2
e- tender for labour and errection work of ht/lt lines and transformer in various scheme at iqbalgadh sub division under palanpur division-2
e- tender for labour and errection work of ht/lt lines and transformer in various scheme at ambaji sub division under palanpur division-2
annual rate contract tender for labour and errection work of ht/lt lines and transformer in various scheme at vadgam sub division under palanpur division-2, ugvcl
repair/ maintenance of unserviceable building meter panels, control switchgears, shaft wiring, cable trunking and distribution boxes of high rise building at rs colaba under ge (nw) navy nagar
shifting of electric poles/transformers obstructing the widening and strengthening work of the road (other district road) in deoria district specifically the stretch from darshan chauraha on the bhatni-balua route to the bihar border via rakhbari and chakhni ghat (chainage 0.000 to 6.000; length 6.000 km). shifting of electric poles/transformers obstructing the widening and strengthening work of the road (other district road) in deoria district specifically the section of the pakdi-baravan-mohra route from chainage 0.000 to 10.330. shifting of electric poles/transformers obstructing the widening and strengthening work of the pakdi-kukurghati road (other district road) in deoria district (length 9.200 km).
corrigendum : ge/sra/t-41/2026-27 - provn of standby lt electric cable for op and technical infrastructure (incl ug) at af stn sirsa
repair/maintenance of street lights, high mast lights, perimeter lighting, flood lights, and lightening protection system and connected items of dlrl, hyderabad
annual operation and maintenance of central secretariat building at naya raipur (c.g.) during the year 2026-27. sh: operation and running maintenance of electrical and mechanical installations.
LOADING...
LOADING...