Latest Feeders Tenders 2026

241 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |19-09-2026 1 Day Left |T247 ID-103080402

corrigendum : supply of rotary coal feeder and rotary ash extractor for bcgcl ctan project

Tiruchirappalli, Tamil Nadu, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

242 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |22-09-2026 4 Days Left|T247 ID-103782978

work of replacement & o/h of lt motors, coal feeder assembly & cleaning & maintenance of various mcc/ transformer of esp & boiler areas during aoh/coh/rsd/routine maintenance at gtps on as & when required basis.

Gandhinagar, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

243 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |22-09-2026 4 Days Left|T247 ID-103932336

corrigendum : supply of - supply of apron feeder deck roller group - | quantity - 75

Dantewada, Chhattisgarh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

244 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |23-09-2026 5 Days Left|T247 ID-103938775

supply of - feeder pillar polycarbonate 63a , polycarbonate feeder pillar 400 amp , polycarbonate feeder pillar, 415v, 400a - | quantity - 12

Jagatsinghpur, Orissa, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

245 |Bid Value:₹ Refer Docs |EMD:₹ 34.00 K |18-09-2026 Ending Today|T247 ID-103989264

wbphed//bmd/niet- 05 of 2026-2027/26 - rectification, installation, testing and recommissioning of 4 nos. 75 kw centrifugal pump feeders and 2 nos. apfc panels at rudra ibs of mukutmanipur ,khatra and ranibundh w/s scheme under bankura mechanical division phe dte.

Bankura, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

246 |Bid Value:₹ Refer Docs |EMD:₹ 31.00 K |18-09-2026 Ending Today|T247 ID-104009620

wbphed//bmd/niet- 05 of 2026-2027/19 - rectification and modification of 4 nos capacitor bank, 4 nos 225kw and 4 nos 260kw motor feeder with other allied work at intake wtp of mukutmanipur,khatra and ranibundh w/s scheme under bankura mechanical division phe dte.

Bankura, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

247 |Bid Value:₹ Refer Docs |EMD:₹ 13.60 K |24-09-2026 6 Days Left|T247 ID-104128341

di of 11kv double feeder over headline and shifting of 11kv godhur switching substation from old and damaged switching room to newly constructed switch room under kusunda area

Dhanbad, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

248 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |22-09-2026 4 Days Left|T247 ID-104129789

e-tender for bifurcation of a) tikv kanajiguda feeder (emz-20/26-27) under general category b) 11kv mdf feeder (emz-21/26-27) under general category and c) 11kv balanagar feeder (emz-22/26-27) under general category in bowenpally division of secunderabad circle.

Secunderabad, Telangana, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

249 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |29-09-2026 11 Days Left|T247 ID-104146910

supply of - p&b advanced feeder vision, type: afv2 , p&b advanced motor vision, draw out type, amvd , p&b fv2, draw out type - | quantity - 18

Tuticorin, Tamil Nadu, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

250 |Bid Value:₹ Refer Docs |EMD:₹ 9.70 K |28-09-2026 10 Days Left|T247 ID-104164687

procurement of pinion apron feeders

Bellary, Karnataka, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

251 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |28-09-2026 10 Days Left|T247 ID-104253794

supply of - 18 inch rotorvane , 4 cut ctc tea machine , vfbd tea drier , dryer discharge conveyor , sifting room machinery , screw conveyor , auto milling machine , auto chasing machine , moist-air exhaust , withered leaf even feeder , monorail tea leaf handling system - machinery | quantity - 11

Wayanad, Kerala, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

252 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |22-09-2026 4 Days Left|T247 ID-104256497

supply of general category and c) 11kv balanagar feeder (emz-22/26-27) under general category in bowenpally division of secunderabad circle.

Secunderabad, Telangana, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

253 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |19-09-2026 1 Day Left |T247 ID-104299507

supply of rotary coal feeder and rotary ash extractor for bcgcl ctan project

Trichy, Tamil Nadu, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

254 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |29-09-2026 11 Days Left|T247 ID-104383449

procurement of different spares for m/s speri make coal feeders, rtps, u# 1 and u#2

Kolkata, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

255 |Bid Value:₹ Refer Docs |EMD:₹ 2.78 Lakh |23-09-2026 5 Days Left|T247 ID-104384301

up gradation of 132kv line feeders relay panel by supply, retrofitting, testing & commissioning at ccpp-1&2, dgbps- gsecl.

Anand, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

256 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |30-09-2026 12 Days Left|T247 ID-104410074

supply of - spares for ptr-tof-ms-8000 - spares tyre for tyre coupling (v2),spares for tripper and apron feeder,oem spares for automobiles | quantity - 1

Ahmedabad, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

257 |Bid Value:₹ 14.53 Cr. |EMD:₹ 43.59 Lakh |06-10-2026 18 Days Left|T247 ID-104309610

supplying and stacking various type of building, road & other construction materials: hire charges of coaltar boiler 900 to 1400 litres , vibrator (needle type 40 mm) , machine for rubbing of floors , hire and running charges of tipper , , seam bolts and nuts 6 mm dia and 25 mm long , 12.5 mm thick gypsum plaster board , brick aggregate (single size):40 mm nominal size , stone aggregate(single size):63 mm nominal size , stone aggregate(single size):50 mm nominal size , stone aggregate(single size): 40 mm nominal size , stone aggregate(single size):25 mm nominal size , stone aggregate(single size):20 mm nominal size , stone aggregate(single size): 12.5 mm nominal, size, stone aggregate(single size): 10 mm nominal size , stone aggregate(single size): 06 mm nominal size , safeda ballies 125 mm diameter , paving bitumen of grade vg 10 of approved, quality, bitumen grade pmb - 40 , coal tar , blasting powder , flame retardant face inslulating, impregnated fibre, board 12 mm thick, curing compound , brick bats , wire brush , soft brush , portland cement , white cement , coal (steam) , brass handles 125 mm with plate 175x32 mm , brass handles 100 mm with plate 150x32 mm mm , brass handles 75 mm with plate 125x32 mm , brass door latch 300x16x5x mm (0.380 kg) , brass door latch 250x16x5 mm (0.350 kg) , brass casement window fastener , brass quadrant stays 300 mm , brass screws 20 mm , nickel plated bright finished mild steel piano, hinges 1 mm thick 25 mm wide, cement concrete jali 50 mm thick , cement concrete jali 40 mm thick , cement concrete jali 25 mm thick , kerosene oil , unslaked lime , marble dust/ powder , acrylic distemper ist quality, having voc content, less than 50 gm/litre, exterior primer , moorum , dry distemper , oil bound washable distemper/ acrylic distemper , linseed oil (double boiled) , distemper primer , aluminium paint , acid proof paint (chocolate or black) , anticorrosive bituminous paint (black) , black japan , enamel paint , floor enamel paint in all shades except green , synthetic enamel paint in black or chocolate shade , synthetic enamel paint in all shades except black, or chocolate shade, plastic emulsion paint , water proofing cement paint , ordinary varnish , superior copal varnish , superior spar varnish , plug , black colour dark shade pigment , green or blue medium shade pigment , pulley 25 mm dia , rolling shutter made of 80x1.25 mm machine, rolled laths, coarse sand (zone iii) , fine sand (zone iv) , galvanised steel plain sheets , shellac , spirit , mild steel round bar 12 mm dia and below , mild steel round bar above 12 mm dia , twisted steel/deformed bars , mild steel square bars , structural steel such as tees, angles, channels and, r.s. joists, flats up to 10 mm in thickness , flats exceeding 10 mm in thickness , mild steel plates , mild steel hooks , mild steel rivets , galvanised steel bolts & nuts 6 mm dia and 25, mm long round head with slots, galvanised steel j or l hooks 8 mm dia , galvanished steel barbed wire , through and bond stone size 24 x 24 x 39cm , stone for masonry work , stone for pitching 15 cm x 22.5 cm , stone dust , kota stone slab 20 mm to 25 mm thick (semi, polished), kota stone slab 25 mm thick (rough chiseled) , precast terrazzo tiles 22 mm thick (light shade) , precast terrazzo tiles 22 mm thick (dark shade) , g.i limpet washer , bitumen washer , g.i. plain washer thick , water proofing materials , wire mesh (rabbit) , chequered terrazzo tiles 22 mm thick (light shade) , chequered terrazzo tiles 22 mm thick (dark shade) , diesel oil , 18 mm thick flamed finish granite stone slab , brass bib-cock-15 mm dia , brass stop-cock 15 mm dia , c.i. cover and frame 300x300 mm inside , c.i. grating 100x100 mm , s.c.i. gully or nahani grating 100 mm dia , vitreous china pedestal for wash basin , g.i. pipes 40 mm dia , g.i pipes 50 mm dia , r.c.c.pipes np2 class 150 mm dia , r.c.c. pipes np2 class 250 mm dia , r.c.c. pipes np2 class 300 mm dia , r.c.c. pipes np2 class 450 mm dia , r.c.c. pipes np2 class 500 mm dia , r.c.c. pipes np2 class 600 mm dia , r.c.c. pipes np2 class 800 mm dia , r.c.c. pipes np2 class 900 mm dia , r.c.c. pipes np2 class 1000 mm dia , r.c.c. pipes np2 class 1100 mm dia , r.c.c. pipes np2 class 1200 mm dia , rcc pipe 450 mm dia np -3 spigot , rcc pipe 600 mm dia np- 3 spigot , rcc pipe 1200 mm dia np - 3 spigot , rcc pipe 1800 mm dia np- 3 spigot , rcc pipe 450 mm dia np- 4 spigot , rcc pipe 600 mm dia np- 4 spigot , rcc pipe 900 mm dia np- 4 spigot , rcc pipe 1000 mm dia np- 4 spigot , rcc pipe 1200 mm dia np- 4 spigot , c.p.brass toilet paper holder of standard size , s.w. gully trap type 100x100 mm , s.w. gully trap type 150x100 mm , gunmetal non-return valve-horizontal (screwed, end ) 25 mm dia, gunmetal non-return valve-horizontal (screwed, end ) 32 mm dia, gunmetal non-return valve-horizontal (screwed, end ) 40 mm dia, vitreous china flat back wash basin 630x450 mm , vitreous china india type w.c. pan size 580 mm , vitreous china orrisa type w.c. pan size 580 mm , 12 mm commercial ply , hollock ballies 125 mm diameter , common burnt clay f.p.s. (non modular) bricks, class designation 7.5, common burnt clay f.p.s. (non modular) bricks, class designation 5.00, gi/aluminium sheet (0.8 mm thick) , galvanised steel corrugated sheets , vitreous china flat back wash basin 550x400 mm , coloured inter locking c.c. paver block , semi rigid pvc waste pipe for sink and wash, basin 32 mm dia with length not less than 700 mm, i/c pvc waste fittings, semi rigid pvc waste pipe for sink and wash, basin 40 mm dia with length not less than 700 mm, i/c pvc waste fittings, spring coil 12 mm , binding wire , gravel 5 mm to 10 mm , gravel 3 mm to 6 mm , turpentine oil , pea gravel , coloured inter locking c.c. paver block , vitrified tile , modular common burnt clay bricks of class, designation 7.5, machine moulded perforated common burnt clay, fps (non modular) bricks of class designation, 12.5, hire charges of drill machine upto 30 mm dia , hire charges of compressure , galvanised steel intermediate cross t section size, 24 x 25 x 0.33 mm (1.2 metre long), galvanised steel intermediate cross t section 24 x, 25 x 0.33 (0.6 metre long), galvanised steel soffit cleat size 25x35x1.60 mm , vitrified floor tile 60x60 cm , chlorinated polyvinyl - chloride (cpvc) pipe 15, mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 20, mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 25, mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 32, mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 40, mm outer dia, 12 mm thick marine plywood conforning is: 710 , 35 mm thick factory made solid panel pvc door, shutter of single piece extruded profile non, decorative finished (matt finished), petrol liter 56.61 , g i wire , , steam coal , bricks , stone aggregate below 40 mm nominal size , coarse sand , timber , steel , brick tiles , lime , tar bitumen , s.w. pipes 300 mm dia , rubbish , , t.m.t. bars fe- 415 , white lime ( white washing) , r.c.c heavy duty non-pressure pipe i.s. class, np=3 casted by vertically vibrated technology -, 900mm dia., welding charges , r.c.c heavy duty non-pressure pipe i.s. class, np=3 casted by vertically vibrated technology -, 600mm dia., steel hysd , marble number plate , carriage of hand broken stone agg. 40 to 63mm, (upto 10 ton), cast iron spigot and socket soil pipe 100mm , cast iron spigot and socket soil pipe 75mm , flat back wash basin white vitrious china 450mm, x 300mm size, flat back wash basin white vitrious china 550mm, x 400mm, gun metal screw down bib tap-15 mm dia , gun metal screw down bib tap-20 mm dia , crushed stone aggregate 40mm to 63mm size , crushed stone aggregate 40mm size , crushed stone aggregate 6mm to 10mm size , s.w. gulley trap 150mm x 100 mm size. , s.w. guly trap 100 x 100 mm size , p.v.c. pipes 10 kgf / sq.cm. 110 mm dia. , through and bond stone , hire and running charges of mechnicals (l.s.) , scaffolding , carraige of panels , bolts and nuts etc , carriaige lime , indigo,gumetc , putty gum etc , brusher sand paper , carriage of materials , r.c.c heavy duty non-pressure pipe i.s. class, np=3 casted by vertically vibrated technology -, 300mm dia., carriage of materials ad fixing charges , painting c.i. cover and frame with coal , hand broken stone aggregate 40mm size to 63mm, size., white earthen ware flat back or corner type urinal, size 430mm x 260mm x 350 mm, flat back wash basin 500mm x 400mm size , gun metal screw down bib tap 15 mm dia. , pillar tap, capstan head, screw down high pressure, with screws, shanks and back nuts (a) 15 mm. dia, cast iron (spun) nahni trap .100 mm. inlet and 50, mm. outlet., c.i. inspection chamber for brick masonary, size-455 x610mm, s.w. gully trap with c.i. grating brick masonry, chamber and water tight c.i. cover with frame of, 300 mm. x 300 size, cast iron spigot and socket soil, waste and, ventilating pipes of the following nominal size.100, mm dia., cast iron spigot and socket soil, waste and, ventilating pipes of the following nominal size.75, mm, galvanized m s tubes (medium grade) 25 mm, dia., galvanized m s tubes (medium grade) 15 mm, dia, cowl vent to pipes - 75 mm. dia. , gun metal check or no return fullway wheel valve, 25 mm. dia, c.i. manhole cover 0.60m x 0.45m size , pvc water tank , fly ash bricks conventional , planks 30 mm thick kail or equivalent soft wood , ventilation , crushed stone aggregates 20mm siz , crushed stone aggregates 10mm size , water proofing materials. , hand broken stone aggregate 25mm size to 90mm, size, ballies 80 mm dia. , ballies 125 mm dia. , battens 50mmx25mm , battens 50mmx50mm , battens 75mmx50mm , principle rafter 100 x 100 x 10 , gusset plate , ties (flat) , 20 mm holding down bolt , applying priming coat , parlin,rafter,tie beam,stuts,colunm post , pvc pipe 25mm , bolts 12 mm dia 10 cm. long , deodar wood and planks , glass 2 mm to 3 mm thick , paver block m200 grade 60mm thick. , anodised aluminium butt hinges 75 mm x 63 mm, x 3.2mm, anodised aluminium butt hinges 50 mm x 45 mm, x 3.2mm, providing fertilizor with transportation.(per bag), (horticulture), mangos , guava , hard morrum , providing and laying g.i pipe 100mm dia , providing and laying g.i pipe 50mm dia , providing and laying g.i sheet 0.8mm thick, corrugated, 300 mm dia class np2 pipe , hand cart with mazdoor , r.c.c. pipes np2 class 600 mm dia , mango plants , conveyance for 0.5km earth , conveyance for 1.0km earth , sandal , teak , jambun graft , aonla graft , bamboo , lemon graft , custard apple graft , guava graft , sapota graft , pomegranate graft , anodised aluminium screw 40mm , anodised aluminium screw 30mm , anodised aluminium screw 20mm , carriage of unslaked lime , iron hinges 100 mm x 58mm x 1.9mm , iron hinges 100 mm x 58 mm x 1.4mm , carriage of stone aggregate 40mm size. , carriage of stone aggregate 20mm size , carriage of brick aggregate 40mm size , carriage of brick aggregate 20mm size , iron hinges 75 mm x 47 mm x 1.7mm , iron hinges 50 mm x 37 mm x 1.5mm , wire gauge of 0.56 mm , bullock with driver for mortar mill , hire and running charges of mechanical mortar, mill, hire and running charges of mechanical, mixer(extra cost of hand mixing in case of hand, mixing), brick aggregate 40mm size , brick aggregate 20mm size , hire and running charges of mechanical mixer , scaffolding , rubbles , carriage of rubble , quarry spall. , carriage of quarry spall , extra cost of centering and shuttering , cover blocks , mango graft ( kesar, lungda, hafus, rajapuri) , mild steel bars , cold twisted bars , precast rcc jali 50 mm thick , precast rcc jali 40 mm thick , precast rcc jali 25 mm thick , precast rcc jali 75 mm thick , precast rcc jali 100 mm thick , cement mortar (1:3) , common burnt clay bricks , through and bond stone , carriage of stone , white bela stone , precast concrete blocks , planks 38 mm thick kail or equivalent soft wood , battens 75mm x100mm. , stone aggregate 10 mm and down gauge , carriage of stone aggregate , dark shade pigment , light shade pigment , medium shade pigment , 20mm thick terrazo tiles , carriage of tiles , white glazed tiles 15 cm x 15 cm x 6 cm , angle size 15 x 15 cm. (glazed) , marble slab 25 mm thick , pigment , polished kota stone slab green. 25 mm thick , carriage of slabs , polished kota stone slab green 30 mm thick , rough kota stone slab 40 mm thick , pre-cast cement concrete tiles , g.i. j or l hooks , carriage of sheets , flat iron bracket with bolts nuts bitumen & g.i, washers, approved water proofing materials to the, recommended proportion required for 50 kg of, cement, scaffolding and racking out joits , g.i.barbed wire , m.s. angle , black stone for cooking platform , insecticides , aeronex powder , d.d.v.p. , heptachlor , melethione , acetone , rajula stone , billimora bricks , teak wood , pegs , galvanised mild steel tube medium grade 20mm, dia, galvanised mild steel tube medium grade 32mm, dia, galvanised mild steel tube medium grade 40mm, dia, galvanised mild steel tube medium grade 50mm, dia, galvanised mild steel tube medium grade 65mm, dia, galvanised mild steel tube medium grade 80mm, dia, galvanised m.s. tee , galvanised m.s. 5 mm nut. , p.v.c. pipes 6 kgf / sq.cm. 20mm dia. , p.v.c. pipes 6 kgf / sq.cm. 25mm dia. , p.v.c. pipes 6 kgf / sq.cm. 32mm dia. , p.v.c. pipes 6 kgf / sq.cm. 40mm dia. , p.v.c. pipes 6 kgf / sq.cm. 50mm dia. , 100x150 mm internal dia. taper bend , 150 mm internal dia. half-round s.w.chenel 60, cm long, c.i. cover with frame 500mm x 700mm inside , c.i. ring painted with coal tar , c.i. cover without frame 300mm x 300mm inside , c.i. cap gril as per std. design , gauge plate , c.i. cover with frame 455mm x 610mm inside , c.i. cover with frame 600mm x 850mm inside , north light adjustable ridge , m.s.flat iron bracket , plastic roofing compound , asbestos rope , manglore tiles , teak reaper , reaper nails 50 mm long , carriage of tiles , fibre base bitumen saturated under layer type-l , residual bitumen , fibre base self finished felt type-ll. grade , fuel steam coal , c.i rainwater pipe 75mm dia. , bat clamps 80 mm dia , a.c. rain water pipe 75 mm diameter (1.8 meter, long), a.c. rain water pipe 100 mm diameter (1.8 meter, long), cast iron nanhi trap , white vitrious china w.c. sqatting pan (india, type), white vitriour china wash down w.c. (european) , white vitrious china 100mm 'p' or 's' trap , white vitrious china foot rest for w.c. , 12.5 litres white vitrious china low level flushinf, cistern with fitting, flush bend, c.p. brass handle, etc, c.i. or m.s brackets , 12.5 litre high level c.i. flushing cistem with, fittings, 32 mm dia. galvanised steel tube flush pipe with, brass galvanised steel checknut, brass screw down bib type. 15mm dia. , brass screw down bib type. 20mm dia , white vitrious china sink 600mm x 450mm x, 150mm, pillar tap 15mm dia , m.i. fisher union 32 mm dia , m.i. fisher union 40 mm dia , pillar tap 20mm dia , brass screw down stop cock 15 mm dia , bevelled edge mirror 600mm x 450mm , playwood sheet 6 mm thick , wooden peg , c.p. brass screws & washers 25 mm size , 600mm x 20mm c.p.brass towel rail together with, a pair of c.p.brass brackets to fit the size of towel, rail, glass shelf with c.p. guard rail and brackets, 600mm x 120mm, brass screw down bib type. 15mm dia. , drumstick/moringa , apple / ber kalmi , black jambun graft , indian gooseberry kalmi ( amla ) , almond , eucalyptus , kerda , curry tree , acid dye ( amli ) , malabar slime ( neem tree ) , heat , brass screw down stop cock 20 mm dia , brass screw down stop cock 25 mm dia , gun metal wheel valve 15mm dia , gun metal wheel valve 20mm dia , gun metal wheel valve 25mm dia. , gun metal wheel valve 32mm dia , gun metal wheel valve 40mm dia. , c.p. brass 1/2 turn flush cock 20 mm dia , c.p. brass 1/2 turn flush cock 25 mm dia , c.p. brass 1/2 turn flush cock 32 mm dia , urinal flat back , urinal squatting type , rubber plug , cromium plated bottle trap. , copper metal ball cock 25mm dia , copper metal ball cock 50mm dia , ball cock of abonite 25 mm diameter , ball cock of abonite 50 mm diameter , c.i. cover with frame 455mm x 610mm , g.i. pipe 30 cm long 50 mm dia , valsasdi mango , mango nutan kalam , paver block m250 grade 60 mm thick. , iron screw 40mm , iron screw 30mm , iron screw 20mm , r.c.c heavy duty non-pressure pipe i.s. class, np=3 casted by vertically vibrated technology -, 450mm dia., r.c.c heavy duty non-pressure pipe i.s. class, np=3 casted by vertically vibrated technology -, r.c.c heavy duty non-pressure pipe i.s. class, np=3 casted by vertically vibrated technology -, 1000mm dia., r.c.c heavy duty non-pressure pipe i.s. class, np=3 casted by vertically vibrated technology -, 1200mm dia., r.c.c heavy duty non-pressure pipe i.s. class, np=3 casted by vertically vibrated technology -, 1400mm dia., r.c.c heavy duty non-pressure pipe i.s. class, np=4 casted by vertically vibrated technology -, 300mm dia., r.c.c heavy duty non-pressure pipe i.s. class, np=4 casted by vertically vibrated technology -, 450mm dia., r.c.c heavy duty non-pressure pipe i.s. class, np=4 casted by vertically vibrated technology -, 500mm dia., r.c.c heavy duty non-pressure pipe i.s. class, np=4 casted by vertically vibrated technology -, 600mm dia., r.c.c heavy duty non-pressure pipe i.s. class, np=4 casted by vertically vibrated technology -, 900mm dia., r.c.c heavy duty non-pressure pipe i.s. class, np=4 casted by vertically vibrated technology -, 1000mm dia., r.c.c heavy duty non-pressure pipe i.s. class, np=4 casted by vertically vibrated technology -, 1200mm dia., r.c.c heavy duty non-pressure pipe i.s. class, np=4 casted by vertically vibrated technology -, 1400mm dia., kesar mango bhet kalam , hafus mango bhet kalam , mango kalam on imported bata , mulberry , grapes , papaya ( rectification type ) , papaya ( hybrid type ) , wood apple ( bel ) , jackfruit , black currant , cashew nut , betel nut/supari , jamfar guti kalam , dadam katka kalam , dadmam guti kalam , amala ankha kalam , mango bhet kalam , chiku bhet kalam , mosambi/kinnani ankh kalam , kagdi lemon , goras ambli , khati ambli , ramfal , seedling size of bag 15cm x 25cm , seedling size of bag 20cm x 30cm , mango bhet kalam (10 cm x 15 cm) , cement mortar (1:2), , at various places of taluka dahod under taluka panchayat, dahod under mgnrega (annual unit rate).

Dahod, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

258 |Bid Value:₹ 9.50 Cr. |EMD:₹ 19.00 Lakh |22-09-2026 4 Days Left|T247 ID-103912895

supply of - self propelled auto batch mixer 2.5 cum capacity - | quantity - 25

Pathankot, Punjab, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

259 |Bid Value:₹ 9.36 Cr. |EMD:₹ Refer Docs |01-10-2026 13 Days Left|T247 ID-104242503

supply of - komatsu saa6d170e-3 engine suitable for wd600-3 wheel dozer , komatsu transmission suitable for wd600-3 wheel dozer , beml transmission suitable for motor grader bg825 , komatsu transmission suitable for hd465-7e0 dumper - | quantity - 6

Chandrapur, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

260 |Bid Value:₹ 9.00 Cr. |EMD:₹ 9.00 Lakh |28-09-2026 10 Days Left|T247 ID-104010464

to provide machinery and vehicles for a period of three (03) years for taking action against encroachment, unauthorized construction, and dangerous buildings within the jurisdiction of mira bhaindar municipal corporation.

Thane, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

261 |Bid Value:₹ 8.29 Cr. |EMD:₹ 16.58 Lakh |23-09-2026 5 Days Left|T247 ID-103969966

supply of seam bolts and nuts 6 mm dia and 25 mm long, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 75x47x1.70 mm, bright finished or black enameled mild steel screws 50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 30 mm, bright finished or black enameled mild steel screws 25 mm, bright finished or black enameled mild steel screws 20 mm, m.s clamps 40mm x 6mm, 125mm length, oxidised mild steel butt hinges 125x90x4 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges 75x47x1.70 mm, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel tower bolt (barrel type) 100x10 mm, oxidised mild steel handles 125 mm, oxidised mild steel handles 100 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, anodised aluminium barrel / tower / socket bolt 150mm long x 10mm dia., anodised aluminium barrel / tower / socket bolt 300mm long x 10mm dia., "anodised aliminium d-type handle continuous plate base (hexagonal/, round rod) 150 mm grip x10 mm dia rod", cement concrete jali 50 mm thick, "ready mixed pink or grey primer on wood work(hard and softwood), having voc content less than 50 gms/litre", "ready mixed red oxide zinc chromatic on steel/ iron work, having voc, content less than 250 gms/litre", "water thinnable cement primer for interior wall surface, having voc, content less than 50 gms/litre", distemper primer, primer for cement paint, cement primer, acrylic distemper ist quality, having voc content less than 50 gm/litre, acrylic emulsion, having voc content less than 50 gm/litre, acrylic exterior paint, "synthetic enamel paint, having voc ( volatile organic compound, content less than 150 gm/liitre", synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, enamel paint, white cement based putty, aluminium paint, plastic emulsion paint, water proofing cement paint, unslaked lime, "galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with, slots", galvanised steel j or l hooks 8 mm dia, "galvanished steel bolts & nuts 10 mm dia and 125 mm long round head, with slots", mild steel bolts 6 mm dia and 25 mm long with hexagonal head, "galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides, threaded with 4 galvanised steel nuts", galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i limpet washer, bitumen washer, g.i. plain washer thick, g.i. plain washer thin, g.i. plain washer for seam bolts, "8 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with, s.s. triangular plate for european type w.c.", shower rose c.p brass for 15 to 20 mm intel 100 mm dia, c.p. brass chain with 32 mm dia rubber plug, c.p.brass chain with 40 mm dia rubber plug, c.p. brass waste 32 mm, c.p. brass waste 40 mm, 15 mm c.p.brass tap, chromium plated stop cock, chromium plated angular stop cock with wall flange, pillar cock of approved make cp pillar cock - 15 mm, c.p. over brass waste fittings 32 mm, "polyethylene water storage tank with cover and suitable locking, arrangemnet", rcc pipe 450 mm dia np -3 spigot, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, c.i. bracket for wash basin and sinks, white vitreous china laboratory sink 450x300x150x mm, white vitreous china laboratory sink 600x450x200 mm, vitreous china pedestal for wash basin, vitreous china lipped front urinal, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china india type w.c. pan size 580 mm, vitreous china orrisa type w.c. pan size 580 mm, orissa pattern water closet 530x410 mm, "white vitreous china dual purpose closet (anglo indian w.c.) suitable for use as squatting pan or european type water closet as per manufacture's, specifications", "floor mounted white vitrous china double trap syphonic wc with 10 litre, cistern and all fittings,seat cover etc", coloured pedestal type w.c. pan 580x440 mm (european type) s trap, vitreous china squatting plate urinal, vitreous china pedestal type water closet, corner urinal, 32 mm dia polythene flush pipe, cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia), gi pipe 32 mm dia medium quality, gi pipe 40 mm dia medium quality, polythene bib cock / stop cock (hd) with metal/plastic inlet, "sink 630 mm x 550 mm x 180 mm with waste fittings and two coats of, painting of c.i. brackets", 15 mm swan neck tap with left & right hand operating nob with aerator, "flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings,, accessories and flush pipe)", ptmt pillar cock, ptmt push cock 15 mm dia, "waste pipe, with pvc coupling at one end fitted with necessary clamps, 900 mm long", "waste pipe, with pvc coupling at one end fitted with necessary clamps, 750 mm long", p.v.c. connector 15 mm dia 600 mm long, towel rail (cp over brass )- 600 mm, ci manhole cover 450 mm dia, "stainless steel kitchen sink - with drain board 510x 1040 mm bowl depth, 225 mm.", "upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm, dia", "upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm, dia", upvc pipes (working pressure 4 kg/cm 2) rubber (seal) ring 75 mm dia, upvc pipes (working pressure 4 kg/cm2) rubber (seal) ring 110 mm dia, upvc coupler for upvc drainage pipes 75 ,mm, upvc coupler for upvc drainage pipes 110 mm, upvc pushfit coupler (single) 75 mm thick, upvc pushfit coupler (single) 110 mm thick, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 75x75x75 mm, upvc single equal tee (with door) 110x110x110 mm, upvc bend 87.50, 75 mm bend, upvcbend 87.50, 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, upvc plain y 75 mm dia, upvc plain y 110 mm dia, "50 mmx42 mmx2 mm thick factory made door frame of pvc extruded, sections in white, grey or wooden finish", 25 mm thick factory made pvc flush door shutter, sal silliguri, other local wood, ordinary teak wood, local sal wood, solid flush type doors of commercial quality, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, "structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is: 226, is: 808 & sp (6)- 1964), weighing less than 22.5 kg/ m", "m.s. structural works in roof trusses with tubular sections conforming to, is: 806-1968 & is: 1161- 1998", m.s. structural with hollow sections (square or rectangular shape), mild steel square bars, 1.5 mm thick ms sheet, flats up to 10mm thickness, flats exceeding 10mm in thickness, collapsible gate, steel railing, mild steel plates, "steel glazed door, window/ ventilator, all members viz, f7d, f4b, k11, and k12b etc.", "openable steel windows as per is sizes with side hung shutters and, horizotal glazing bars.", ornamental grill weighing above 10 kg./sq.mtr and up to 16 kg./sq. mtr., ornamental grill weighing above 16 kg/sq. m, 2-track / 3-track aluminium sliding window, partly glazed partly paneled or fully glazed single leaf aluminium swing do, aluminium fixed partition wall of all aluminium sections, false ceiling (with 4mm thick pearl designer fibre cement board), false ceiling (with 6 mm thick fiber cement designer board), galvanished steel corrugated sheets, zn-al alloy steel sheet work in roof, precoated galvanised steel plain ridges, glass reinforced polyester translucent fiber glass sheet, glass reinforced polyester translucent ridging, "fencing post 215 cm 150 mm x 150 mm section at bottom, 100 mm x 100 mm section at top with t-base 300 mm x 150 mm x 100 mm, having 4 nos 6 mm dia vertical m.s. reinforcement and 6 mm dia binders @ 200, mm centres, finished smooth", "chain link fencing of approved quality( with galvanised ""c"" clips) to grid of horizontal strands of galvanised high tensile spring steel wire of 12, s.w.g. 5 mm. x 75 mm. x 8 g.", galvanised barbed wire 3 ply 12 gauge / 4 points, nail, jute rope, coconut rope, poly rope, wire brush, soft brush, wire mesh (rabbit), nylon net, 12mm commercial ply, autoclaved aerated cement (aac) blocks, common burnt clay f.p.s. (non modular) bricks class designation 7.5, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sq, frosted glass sheet or nominal thickness 4mm (weighing not less than 10kg, mirror of superior make glass 60x45cm, "ceramic glazed tiles ist quality minimum thickness 5mm in all colours, shades and designs except burgundy, bottle green black", "ceramic glazed tiles ist quality 300mmx300mm in all shades and designs, of white , lvory, grey, fume red brown etc.", vitrified floor tile 60x60 cm, polymer modified adhesive mortar, chequered terrazzo tiles 22 mm thick (light shade), chequered terrazzo tiles 22mm thick (medium shade), interlocking c.c. paver block (60 mm thick, m-30), bamboo 25 mm dia 2.5 meter long, bamboo 8cm to 10cm, size 6m length, bamboo basket (doko), water proofing materials, g.i. wire, sausage wire net, binding wire, silpouline sheet 15'x12', plastic sheet, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., empty gunny bag, first aid box, cowdung, stone aggrigate (single size) : 63mm nominal size, stone aggrigate (single size) : 50mm nominal size, stone aggrigate (single size) : 40mm nominal size, stone aggrigate (single size) : 25mm nominal size, stone aggrigate (single size) : 20mm nominal size, stone aggrigate (single size) : 12.5mm nominal size, stone aggrigate (single size) : 10mm nominal size, stone aggrigate (single size) : 06mm nominal size, bajiri, portland cement (opc-43 grade), galvanised steel plain sheet, mild steel round bar 12mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcement, twisted steel/ deformed tmt bars fe-500d, stone for pitching 15cm x 22.5cm, stone grit 6mm and down size or pea sized gravel, g.i. pipes 15mm dia, g.i. pipes 20mm dia, g.i. pipes 25mm dia, g.i. pipes 32mm dia, g.i. pipes 40mm dia, g.i. pipes 50mm dia, g.i. back (jam) nut 25mm dia, g.i. tees (equal) 25mm, g.i. union 15mm nominal bore, g.i. union 20mm nominal bore, g.i. union 25mm nominal bore, g.i. union 32mm nominal bore, g.i. union 40mm nominal bore, stone boulder ( 225mm-150mm ), "hire charges of shuttering plank (25mm-30mm thick) with prop including, all fittings", coarse sand (zone iii), medium sand, fine sand ( zone iv), river bed materials

Darjeeling, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

262 |Bid Value:₹ 8.02 Cr. |EMD:₹ 16.05 Lakh |05-10-2026 17 Days Left|T247 ID-103993093

procurement of bucket (dipper) assembly, capacity - 20 cum of wk-20 tz make shovel

Sidhi, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

263 |Bid Value:₹ 5.40 Cr. |EMD:₹ 5.40 Lakh |21-09-2026 3 Days Left|T247 ID-103132188

corrigendum : supply of - hopper tipper dumper for garbage (q2) - | quantity - 50

Raipur, Chhattisgarh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

264 |Bid Value:₹ 5.23 Cr. |EMD:₹ 10.46 Lakh |23-09-2026 5 Days Left|T247 ID-103932235

supply of - self propelled auto batch mixer 4 cum - | quantity - 13

Pathankot, Punjab, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

265 |Bid Value:₹ 4.92 Cr. |EMD:₹ 9.83 Lakh |23-09-2026 5 Days Left|T247 ID-103969922

supply of seam bolts and nuts 6 mm dia and 25 mm long, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 75x47x1.70 mm, bright finished or black enameled mild steel screws 50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 30 mm, bright finished or black enameled mild steel screws 25 mm, bright finished or black enameled mild steel screws 20 mm, m.s clamps 40mm x 6mm, 125mm length, oxidised mild steel butt hinges 125x90x4 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges 75x47x1.70 mm, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel tower bolt (barrel type) 100x10 mm, oxidised mild steel handles 125 mm, oxidised mild steel handles 100 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, anodised aluminium barrel / tower / socket bolt 150mm long x 10mm dia., anodised aluminium barrel / tower / socket bolt 300mm long x 10mm dia., "anodised aliminium d-type handle continuous plate base (hexagonal/, round rod) 150 mm grip x10 mm dia rod", cement concrete jali 50 mm thick, "ready mixed pink or grey primer on wood work(hard and softwood), having voc content less than 50 gms/litre", "ready mixed red oxide zinc chromatic on steel/ iron work, having voc, content less than 250 gms/litre", "water thinnable cement primer for interior wall surface, having voc, content less than 50 gms/litre", distemper primer, primer for cement paint, cement primer, acrylic distemper ist quality, having voc content less than 50 gm/litre, acrylic emulsion, having voc content less than 50 gm/litre, acrylic exterior paint, "synthetic enamel paint, having voc ( volatile organic compound, content less than 150 gm/liitre", synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, enamel paint, white cement based putty, aluminium paint, plastic emulsion paint, water proofing cement paint, unslaked lime, "galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with, slots", galvanised steel j or l hooks 8 mm dia, "galvanished steel bolts & nuts 10 mm dia and 125 mm long round head, with slots", mild steel bolts 6 mm dia and 25 mm long with hexagonal head, "galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides, threaded with 4 galvanised steel nuts", galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i limpet washer, bitumen washer, g.i. plain washer thick, g.i. plain washer thin, g.i. plain washer for seam bolts, "8 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with, s.s. triangular plate for european type w.c.", shower rose c.p brass for 15 to 20 mm intel 100 mm dia, c.p. brass chain with 32 mm dia rubber plug, c.p.brass chain with 40 mm dia rubber plug, c.p. brass waste 32 mm, c.p. brass waste 40 mm, 15 mm c.p.brass tap, chromium plated stop cock, chromium plated angular stop cock with wall flange, pillar cock of approved make cp pillar cock - 15 mm, c.p. over brass waste fittings 32 mm, "polyethylene water storage tank with cover and suitable locking, arrangemnet", rcc pipe 450 mm dia np -3 spigot, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, c.i. bracket for wash basin and sinks, white vitreous china laboratory sink 450x300x150x mm, white vitreous china laboratory sink 600x450x200 mm, vitreous china pedestal for wash basin, vitreous china lipped front urinal, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china india type w.c. pan size 580 mm, vitreous china orrisa type w.c. pan size 580 mm, orissa pattern water closet 530x410 mm, "white vitreous china dual purpose closet (anglo indian w.c.) suitable for use as squatting pan or european type water closet as per manufacture's, specifications", "floor mounted white vitrous china double trap syphonic wc with 10 litre, cistern and all fittings,seat cover etc", coloured pedestal type w.c. pan 580x440 mm (european type) s trap, vitreous china squatting plate urinal, vitreous china pedestal type water closet, corner urinal, 32 mm dia polythene flush pipe, cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia), gi pipe 32 mm dia medium quality, gi pipe 40 mm dia medium quality, polythene bib cock / stop cock (hd) with metal/plastic inlet, "sink 630 mm x 550 mm x 180 mm with waste fittings and two coats of, painting of c.i. brackets", 15 mm swan neck tap with left & right hand operating nob with aerator, "flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings,, accessories and flush pipe)", ptmt pillar cock, ptmt push cock 15 mm dia, "waste pipe, with pvc coupling at one end fitted with necessary clamps, 900 mm long", "waste pipe, with pvc coupling at one end fitted with necessary clamps, 750 mm long", p.v.c. connector 15 mm dia 600 mm long, towel rail (cp over brass )- 600 mm, ci manhole cover 450 mm dia, "stainless steel kitchen sink - with drain board 510x 1040 mm bowl depth, 225 mm.", "upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm, dia", "upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm, dia", upvc pipes (working pressure 4 kg/cm 2) rubber (seal) ring 75 mm dia, upvc pipes (working pressure 4 kg/cm2) rubber (seal) ring 110 mm dia, upvc coupler for upvc drainage pipes 75 ,mm, upvc coupler for upvc drainage pipes 110 mm, upvc pushfit coupler (single) 75 mm thick, upvc pushfit coupler (single) 110 mm thick, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 75x75x75 mm, upvc single equal tee (with door) 110x110x110 mm, upvc bend 87.50, 75 mm bend, upvcbend 87.50, 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, upvc plain y 75 mm dia, upvc plain y 110 mm dia, "50 mmx42 mmx2 mm thick factory made door frame of pvc extruded, sections in white, grey or wooden finish", 25 mm thick factory made pvc flush door shutter, sal silliguri, other local wood, ordinary teak wood, local sal wood, solid flush type doors of commercial quality, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, "structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is: 226, is: 808 & sp (6)- 1964), weighing less than 22.5 kg/ m", "m.s. structural works in roof trusses with tubular sections conforming to, is: 806-1968 & is: 1161- 1998", m.s. structural with hollow sections (square or rectangular shape), mild steel square bars, 1.5 mm thick ms sheet, flats up to 10mm thickness, flats exceeding 10mm in thickness, collapsible gate, steel railing, mild steel plates, "steel glazed door, window/ ventilator, all members viz, f7d, f4b, k11, and k12b etc.", "openable steel windows as per is sizes with side hung shutters and, horizotal glazing bars.", ornamental grill weighing above 10 kg./sq.mtr and up to 16 kg./sq. mtr., ornamental grill weighing above 16 kg/sq. m, 2-track / 3-track aluminium sliding window, partly glazed partly paneled or fully glazed single leaf aluminium swing do, aluminium fixed partition wall of all aluminium sections, false ceiling (with 4mm thick pearl designer fibre cement board), false ceiling (with 6 mm thick fiber cement designer board), galvanished steel corrugated sheets, zn-al alloy steel sheet work in roof, precoated galvanised steel plain ridges, glass reinforced polyester translucent fiber glass sheet, glass reinforced polyester translucent ridging, "fencing post 215 cm 150 mm x 150 mm section at bottom, 100 mm x 100 mm section at top with t-base 300 mm x 150 mm x 100 mm, having 4 nos 6 mm dia vertical m.s. reinforcement and 6 mm dia binders @ 200, mm centres, finished smooth", "chain link fencing of approved quality( with galvanised ""c"" clips) to grid of horizontal strands of galvanised high tensile spring steel wire of 12, s.w.g. 5 mm. x 75 mm. x 8 g.", galvanised barbed wire 3 ply 12 gauge / 4 points, nail, jute rope, coconut rope, poly rope, wire brush, soft brush, wire mesh (rabbit), nylon net, 12mm commercial ply, autoclaved aerated cement (aac) blocks, common burnt clay f.p.s. (non modular) bricks class designation 7.5, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sq, frosted glass sheet or nominal thickness 4mm (weighing not less than 10kg, mirror of superior make glass 60x45cm, "ceramic glazed tiles ist quality minimum thickness 5mm in all colours, shades and designs except burgundy, bottle green black", "ceramic glazed tiles ist quality 300mmx300mm in all shades and designs, of white , lvory, grey, fume red brown etc.", vitrified floor tile 60x60 cm, polymer modified adhesive mortar, chequered terrazzo tiles 22 mm thick (light shade), chequered terrazzo tiles 22mm thick (medium shade), interlocking c.c. paver block (60 mm thick, m-30), bamboo 25 mm dia 2.5 meter long, bamboo 8cm to 10cm, size 6m length, bamboo basket (doko), water proofing materials, g.i. wire, sausage wire net, binding wire, silpouline sheet 15'x12', plastic sheet, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., empty gunny bag, first aid box, cowdung, stone aggrigate (single size) : 63mm nominal size, stone aggrigate (single size) : 50mm nominal size, stone aggrigate (single size) : 40mm nominal size, stone aggrigate (single size) : 25mm nominal size, stone aggrigate (single size) : 20mm nominal size, stone aggrigate (single size) : 12.5mm nominal size, stone aggrigate (single size) : 10mm nominal size, stone aggrigate (single size) : 06mm nominal size, bajiri, portland cement (opc-43 grade), galvanised steel plain sheet, mild steel round bar 12mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcement, twisted steel/ deformed tmt bars fe-500d, stone for pitching 15cm x 22.5cm, stone grit 6mm and down size or pea sized gravel, g.i. pipes 15mm dia, g.i. pipes 20mm dia, g.i. pipes 25mm dia, g.i. pipes 32mm dia, g.i. pipes 40mm dia, g.i. pipes 50mm dia, g.i. back (jam) nut 25mm dia, g.i. tees (equal) 25mm, g.i. union 15mm nominal bore, g.i. union 20mm nominal bore, g.i. union 25mm nominal bore, g.i. union 32mm nominal bore, g.i. union 40mm nominal bore, stone boulder ( 225mm-150mm ), "hire charges of shuttering plank (25mm-30mm thick) with prop including, all fittings", coarse sand (zone iii), medium sand, fine sand ( zone iv), river bed materials

Darjeeling, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

266 |Bid Value:₹ 4.68 Cr. |EMD:₹ 9.35 Lakh |23-09-2026 5 Days Left|T247 ID-103969936

supply of seam bolts and nuts 6 mm dia and 25 mm long, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 75x47x1.70 mm, bright finished or black enameled mild steel screws 50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 30 mm, bright finished or black enameled mild steel screws 25 mm, bright finished or black enameled mild steel screws 20 mm, m.s clamps 40mm x 6mm, 125mm length, oxidised mild steel butt hinges 125x90x4 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges 75x47x1.70 mm, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel tower bolt (barrel type) 100x10 mm, oxidised mild steel handles 125 mm, oxidised mild steel handles 100 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, anodised aluminium barrel / tower / socket bolt 150mm long x 10mm dia., anodised aluminium barrel / tower / socket bolt 300mm long x 10mm dia., "anodised aliminium d-type handle continuous plate base (hexagonal/, round rod) 150 mm grip x10 mm dia rod", cement concrete jali 50 mm thick, "ready mixed pink or grey primer on wood work(hard and softwood), having voc content less than 50 gms/litre", "ready mixed red oxide zinc chromatic on steel/ iron work, having voc, content less than 250 gms/litre", "water thinnable cement primer for interior wall surface, having voc, content less than 50 gms/litre", distemper primer, primer for cement paint, cement primer, acrylic distemper ist quality, having voc content less than 50 gm/litre, acrylic emulsion, having voc content less than 50 gm/litre, acrylic exterior paint, "synthetic enamel paint, having voc ( volatile organic compound, content less than 150 gm/liitre", synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, enamel paint, white cement based putty, aluminium paint, plastic emulsion paint, water proofing cement paint, unslaked lime, "galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with, slots", galvanised steel j or l hooks 8 mm dia, "galvanished steel bolts & nuts 10 mm dia and 125 mm long round head, with slots", mild steel bolts 6 mm dia and 25 mm long with hexagonal head, "galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides, threaded with 4 galvanised steel nuts", galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i limpet washer, bitumen washer, g.i. plain washer thick, g.i. plain washer thin, g.i. plain washer for seam bolts, "8 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with, s.s. triangular plate for european type w.c.", shower rose c.p brass for 15 to 20 mm intel 100 mm dia, c.p. brass chain with 32 mm dia rubber plug, c.p.brass chain with 40 mm dia rubber plug, c.p. brass waste 32 mm, c.p. brass waste 40 mm, 15 mm c.p.brass tap, chromium plated stop cock, chromium plated angular stop cock with wall flange, pillar cock of approved make cp pillar cock - 15 mm, c.p. over brass waste fittings 32 mm, "polyethylene water storage tank with cover and suitable locking, arrangemnet", rcc pipe 450 mm dia np -3 spigot, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, c.i. bracket for wash basin and sinks, white vitreous china laboratory sink 450x300x150x mm, white vitreous china laboratory sink 600x450x200 mm, vitreous china pedestal for wash basin, vitreous china lipped front urinal, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china india type w.c. pan size 580 mm, vitreous china orrisa type w.c. pan size 580 mm, orissa pattern water closet 530x410 mm, "white vitreous china dual purpose closet (anglo indian w.c.) suitable for use as squatting pan or european type water closet as per manufacture's, specifications", "floor mounted white vitrous china double trap syphonic wc with 10 litre, cistern and all fittings,seat cover etc", coloured pedestal type w.c. pan 580x440 mm (european type) s trap, vitreous china squatting plate urinal, vitreous china pedestal type water closet, corner urinal, 32 mm dia polythene flush pipe, cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia), gi pipe 32 mm dia medium quality, gi pipe 40 mm dia medium quality, polythene bib cock / stop cock (hd) with metal/plastic inlet, "sink 630 mm x 550 mm x 180 mm with waste fittings and two coats of, painting of c.i. brackets", 15 mm swan neck tap with left & right hand operating nob with aerator, "flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings,, accessories and flush pipe)", ptmt pillar cock, ptmt push cock 15 mm dia, "waste pipe, with pvc coupling at one end fitted with necessary clamps, 900 mm long", "waste pipe, with pvc coupling at one end fitted with necessary clamps, 750 mm long", p.v.c. connector 15 mm dia 600 mm long, towel rail (cp over brass )- 600 mm, ci manhole cover 450 mm dia, "stainless steel kitchen sink - with drain board 510x 1040 mm bowl depth, 225 mm.", "upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm, dia", "upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm, dia", upvc pipes (working pressure 4 kg/cm 2) rubber (seal) ring 75 mm dia, upvc pipes (working pressure 4 kg/cm2) rubber (seal) ring 110 mm dia, upvc coupler for upvc drainage pipes 75 ,mm, upvc coupler for upvc drainage pipes 110 mm, upvc pushfit coupler (single) 75 mm thick, upvc pushfit coupler (single) 110 mm thick, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 75x75x75 mm, upvc single equal tee (with door) 110x110x110 mm, upvc bend 87.50, 75 mm bend, upvcbend 87.50, 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, upvc plain y 75 mm dia, upvc plain y 110 mm dia, "50 mmx42 mmx2 mm thick factory made door frame of pvc extruded, sections in white, grey or wooden finish", 25 mm thick factory made pvc flush door shutter, sal silliguri, other local wood, ordinary teak wood, local sal wood, solid flush type doors of commercial quality, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, "structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is: 226, is: 808 & sp (6)- 1964), weighing less than 22.5 kg/ m", "m.s. structural works in roof trusses with tubular sections conforming to, is: 806-1968 & is: 1161- 1998", m.s. structural with hollow sections (square or rectangular shape), mild steel square bars, 1.5 mm thick ms sheet, flats up to 10mm thickness, flats exceeding 10mm in thickness, collapsible gate, steel railing, mild steel plates, "steel glazed door, window/ ventilator, all members viz, f7d, f4b, k11, and k12b etc.", "openable steel windows as per is sizes with side hung shutters and, horizotal glazing bars.", ornamental grill weighing above 10 kg./sq.mtr and up to 16 kg./sq. mtr., ornamental grill weighing above 16 kg/sq. m, 2-track / 3-track aluminium sliding window, partly glazed partly paneled or fully glazed single leaf aluminium swing do, aluminium fixed partition wall of all aluminium sections, false ceiling (with 4mm thick pearl designer fibre cement board), false ceiling (with 6 mm thick fiber cement designer board), galvanished steel corrugated sheets, zn-al alloy steel sheet work in roof, precoated galvanised steel plain ridges, glass reinforced polyester translucent fiber glass sheet, glass reinforced polyester translucent ridging, "fencing post 215 cm 150 mm x 150 mm section at bottom, 100 mm x 100 mm section at top with t-base 300 mm x 150 mm x 100 mm, having 4 nos 6 mm dia vertical m.s. reinforcement and 6 mm dia binders @ 200, mm centres, finished smooth", "chain link fencing of approved quality( with galvanised ""c"" clips) to grid of horizontal strands of galvanised high tensile spring steel wire of 12, s.w.g. 5 mm. x 75 mm. x 8 g.", galvanised barbed wire 3 ply 12 gauge / 4 points, nail, jute rope, coconut rope, poly rope, wire brush, soft brush, wire mesh (rabbit), nylon net, 12mm commercial ply, autoclaved aerated cement (aac) blocks, common burnt clay f.p.s. (non modular) bricks class designation 7.5, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sq, frosted glass sheet or nominal thickness 4mm (weighing not less than 10kg, mirror of superior make glass 60x45cm, "ceramic glazed tiles ist quality minimum thickness 5mm in all colours, shades and designs except burgundy, bottle green black", "ceramic glazed tiles ist quality 300mmx300mm in all shades and designs, of white , lvory, grey, fume red brown etc.", vitrified floor tile 60x60 cm, polymer modified adhesive mortar, chequered terrazzo tiles 22 mm thick (light shade), chequered terrazzo tiles 22mm thick (medium shade), interlocking c.c. paver block (60 mm thick, m-30), bamboo 25 mm dia 2.5 meter long, bamboo 8cm to 10cm, size 6m length, bamboo basket (doko), water proofing materials, g.i. wire, sausage wire net, binding wire, silpouline sheet 15'x12', plastic sheet, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., empty gunny bag, first aid box, cowdung, stone aggrigate (single size) : 63mm nominal size, stone aggrigate (single size) : 50mm nominal size, stone aggrigate (single size) : 40mm nominal size, stone aggrigate (single size) : 25mm nominal size, stone aggrigate (single size) : 20mm nominal size, stone aggrigate (single size) : 12.5mm nominal size, stone aggrigate (single size) : 10mm nominal size, stone aggrigate (single size) : 06mm nominal size, bajiri, portland cement (opc-43 grade), galvanised steel plain sheet, mild steel round bar 12mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcement, twisted steel/ deformed tmt bars fe-500d, stone for pitching 15cm x 22.5cm, stone grit 6mm and down size or pea sized gravel, g.i. pipes 15mm dia, g.i. pipes 20mm dia, g.i. pipes 25mm dia, g.i. pipes 32mm dia, g.i. pipes 40mm dia, g.i. pipes 50mm dia, g.i. back (jam) nut 25mm dia, g.i. tees (equal) 25mm, g.i. union 15mm nominal bore, g.i. union 20mm nominal bore, g.i. union 25mm nominal bore, g.i. union 32mm nominal bore, g.i. union 40mm nominal bore, stone boulder ( 225mm-150mm ), "hire charges of shuttering plank (25mm-30mm thick) with prop including, all fittings", coarse sand (zone iii), medium sand, fine sand ( zone iv), river bed materials

Darjeeling, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

267 |Bid Value:₹ 4.16 Cr. |EMD:₹ 8.32 Lakh |23-09-2026 5 Days Left|T247 ID-103947915

supply of seam bolts and nuts 6 mm dia and 25 mm long, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 75x47x1.70 mm, bright finished or black enameled mild steel screws 50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 30 mm, bright finished or black enameled mild steel screws 25 mm, bright finished or black enameled mild steel screws 20 mm, m.s clamps 40mm x 6mm, 125mm length, oxidised mild steel butt hinges 125x90x4 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges 75x47x1.70 mm, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel tower bolt (barrel type) 100x10 mm, oxidised mild steel handles 125 mm, oxidised mild steel handles 100 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, anodised aluminium barrel / tower / socket bolt 150mm long x 10mm dia., anodised aluminium barrel / tower / socket bolt 300mm long x 10mm dia., "anodised aliminium d-type handle continuous plate base (hexagonal/, round rod) 150 mm grip x10 mm dia rod", cement concrete jali 50 mm thick, "ready mixed pink or grey primer on wood work(hard and softwood), having voc content less than 50 gms/litre", "ready mixed red oxide zinc chromatic on steel/ iron work, having voc, content less than 250 gms/litre", "water thinnable cement primer for interior wall surface, having voc, content less than 50 gms/litre", distemper primer, primer for cement paint, cement primer, acrylic distemper ist quality, having voc content less than 50 gm/litre, acrylic emulsion, having voc content less than 50 gm/litre, acrylic exterior paint, "synthetic enamel paint, having voc ( volatile organic compound, content less than 150 gm/liitre", synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, enamel paint, white cement based putty, aluminium paint, plastic emulsion paint, water proofing cement paint, unslaked lime, "galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with, slots", galvanised steel j or l hooks 8 mm dia, "galvanished steel bolts & nuts 10 mm dia and 125 mm long round head, with slots", mild steel bolts 6 mm dia and 25 mm long with hexagonal head, "galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides, threaded with 4 galvanised steel nuts", galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i limpet washer, bitumen washer, g.i. plain washer thick, g.i. plain washer thin, g.i. plain washer for seam bolts, "8 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with, s.s. triangular plate for european type w.c.", shower rose c.p brass for 15 to 20 mm intel 100 mm dia, c.p. brass chain with 32 mm dia rubber plug, c.p.brass chain with 40 mm dia rubber plug, c.p. brass waste 32 mm, c.p. brass waste 40 mm, 15 mm c.p.brass tap, chromium plated stop cock, chromium plated angular stop cock with wall flange, pillar cock of approved make cp pillar cock - 15 mm, c.p. over brass waste fittings 32 mm, "polyethylene water storage tank with cover and suitable locking, arrangemnet", rcc pipe 450 mm dia np -3 spigot, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, c.i. bracket for wash basin and sinks, white vitreous china laboratory sink 450x300x150x mm, white vitreous china laboratory sink 600x450x200 mm, vitreous china pedestal for wash basin, vitreous china lipped front urinal, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china india type w.c. pan size 580 mm, vitreous china orrisa type w.c. pan size 580 mm, orissa pattern water closet 530x410 mm, "white vitreous china dual purpose closet (anglo indian w.c.) suitable for use as squatting pan or european type water closet as per manufacture's, specifications", "floor mounted white vitrous china double trap syphonic wc with 10 litre, cistern and all fittings,seat cover etc", coloured pedestal type w.c. pan 580x440 mm (european type) s trap, vitreous china squatting plate urinal, vitreous china pedestal type water closet, corner urinal, 32 mm dia polythene flush pipe, cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia), gi pipe 32 mm dia medium quality, gi pipe 40 mm dia medium quality, polythene bib cock / stop cock (hd) with metal/plastic inlet, "sink 630 mm x 550 mm x 180 mm with waste fittings and two coats of, painting of c.i. brackets", 15 mm swan neck tap with left & right hand operating nob with aerator, "flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings,, accessories and flush pipe)", ptmt pillar cock, ptmt push cock 15 mm dia, "waste pipe, with pvc coupling at one end fitted with necessary clamps, 900 mm long", "waste pipe, with pvc coupling at one end fitted with necessary clamps, 750 mm long", p.v.c. connector 15 mm dia 600 mm long, towel rail (cp over brass )- 600 mm, ci manhole cover 450 mm dia, "stainless steel kitchen sink - with drain board 510x 1040 mm bowl depth, 225 mm.", "upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm, dia", "upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm, dia", upvc pipes (working pressure 4 kg/cm 2) rubber (seal) ring 75 mm dia, upvc pipes (working pressure 4 kg/cm2) rubber (seal) ring 110 mm dia, upvc coupler for upvc drainage pipes 75 ,mm, upvc coupler for upvc drainage pipes 110 mm, upvc pushfit coupler (single) 75 mm thick, upvc pushfit coupler (single) 110 mm thick, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 75x75x75 mm, upvc single equal tee (with door) 110x110x110 mm, upvc bend 87.50, 75 mm bend, upvcbend 87.50, 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, upvc plain y 75 mm dia, upvc plain y 110 mm dia, "50 mmx42 mmx2 mm thick factory made door frame of pvc extruded, sections in white, grey or wooden finish", 25 mm thick factory made pvc flush door shutter, sal silliguri, other local wood, ordinary teak wood, local sal wood, solid flush type doors of commercial quality, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, "structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is: 226, is: 808 & sp (6)- 1964), weighing less than 22.5 kg/ m", "m.s. structural works in roof trusses with tubular sections conforming to, is: 806-1968 & is: 1161- 1998", m.s. structural with hollow sections (square or rectangular shape), mild steel square bars, 1.5 mm thick ms sheet, flats up to 10mm thickness, flats exceeding 10mm in thickness, collapsible gate, steel railing, mild steel plates, "steel glazed door, window/ ventilator, all members viz, f7d, f4b, k11, and k12b etc.", "openable steel windows as per is sizes with side hung shutters and, horizotal glazing bars.", ornamental grill weighing above 10 kg./sq.mtr and up to 16 kg./sq. mtr., ornamental grill weighing above 16 kg/sq. m, 2-track / 3-track aluminium sliding window, partly glazed partly paneled or fully glazed single leaf aluminium swing do, aluminium fixed partition wall of all aluminium sections, false ceiling (with 4mm thick pearl designer fibre cement board), false ceiling (with 6 mm thick fiber cement designer board), galvanished steel corrugated sheets, zn-al alloy steel sheet work in roof, precoated galvanised steel plain ridges, glass reinforced polyester translucent fiber glass sheet, glass reinforced polyester translucent ridging, "fencing post 215 cm 150 mm x 150 mm section at bottom, 100 mm x 100 mm section at top with t-base 300 mm x 150 mm x 100 mm, having 4 nos 6 mm dia vertical m.s. reinforcement and 6 mm dia binders @ 200, mm centres, finished smooth", "chain link fencing of approved quality( with galvanised ""c"" clips) to grid of horizontal strands of galvanised high tensile spring steel wire of 12, s.w.g. 5 mm. x 75 mm. x 8 g.", galvanised barbed wire 3 ply 12 gauge / 4 points, nail, jute rope, coconut rope, poly rope, wire brush, soft brush, wire mesh (rabbit), nylon net, 12mm commercial ply, autoclaved aerated cement (aac) blocks, common burnt clay f.p.s. (non modular) bricks class designation 7.5, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sq, frosted glass sheet or nominal thickness 4mm (weighing not less than 10kg, mirror of superior make glass 60x45cm, "ceramic glazed tiles ist quality minimum thickness 5mm in all colours, shades and designs except burgundy, bottle green black", "ceramic glazed tiles ist quality 300mmx300mm in all shades and designs, of white , lvory, grey, fume red brown etc.", vitrified floor tile 60x60 cm, polymer modified adhesive mortar, chequered terrazzo tiles 22 mm thick (light shade), chequered terrazzo tiles 22mm thick (medium shade), interlocking c.c. paver block (60 mm thick, m-30), bamboo 25 mm dia 2.5 meter long, bamboo 8cm to 10cm, size 6m length, bamboo basket (doko), water proofing materials, g.i. wire, sausage wire net, binding wire, silpouline sheet 15'x12', plastic sheet, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., empty gunny bag, first aid box, cowdung, stone aggrigate (single size) : 63mm nominal size, stone aggrigate (single size) : 50mm nominal size, stone aggrigate (single size) : 40mm nominal size, stone aggrigate (single size) : 25mm nominal size, stone aggrigate (single size) : 20mm nominal size, stone aggrigate (single size) : 12.5mm nominal size, stone aggrigate (single size) : 10mm nominal size, stone aggrigate (single size) : 06mm nominal size, bajiri, portland cement (opc-43 grade), galvanised steel plain sheet, mild steel round bar 12mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcement, twisted steel/ deformed tmt bars fe-500d, stone for pitching 15cm x 22.5cm, stone grit 6mm and down size or pea sized gravel, g.i. pipes 15mm dia, g.i. pipes 20mm dia, g.i. pipes 25mm dia, g.i. pipes 32mm dia, g.i. pipes 40mm dia, g.i. pipes 50mm dia, g.i. back (jam) nut 25mm dia, g.i. tees (equal) 25mm, g.i. union 15mm nominal bore, g.i. union 20mm nominal bore, g.i. union 25mm nominal bore, g.i. union 32mm nominal bore, g.i. union 40mm nominal bore, stone boulder ( 225mm-150mm ), "hire charges of shuttering plank (25mm-30mm thick) with prop including, all fittings", coarse sand (zone iii), medium sand, fine sand ( zone iv), river bed materials

Darjeeling, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

268 |Bid Value:₹ 4.11 Cr. |EMD:₹ 8.22 Lakh |23-09-2026 5 Days Left|T247 ID-103947919

supply of seam bolts and nuts 6 mm dia and 25 mm long, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 75x47x1.70 mm, bright finished or black enameled mild steel screws 50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 30 mm, bright finished or black enameled mild steel screws 25 mm, bright finished or black enameled mild steel screws 20 mm, m.s clamps 40mm x 6mm, 125mm length, oxidised mild steel butt hinges 125x90x4 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges 75x47x1.70 mm, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel tower bolt (barrel type) 100x10 mm, oxidised mild steel handles 125 mm, oxidised mild steel handles 100 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, anodised aluminium barrel / tower / socket bolt 150mm long x 10mm dia., anodised aluminium barrel / tower / socket bolt 300mm long x 10mm dia., "anodised aliminium d-type handle continuous plate base (hexagonal/, round rod) 150 mm grip x10 mm dia rod", cement concrete jali 50 mm thick, "ready mixed pink or grey primer on wood work(hard and softwood), having voc content less than 50 gms/litre", "ready mixed red oxide zinc chromatic on steel/ iron work, having voc, content less than 250 gms/litre", "water thinnable cement primer for interior wall surface, having voc, content less than 50 gms/litre", distemper primer, primer for cement paint, cement primer, acrylic distemper ist quality, having voc content less than 50 gm/litre, acrylic emulsion, having voc content less than 50 gm/litre, acrylic exterior paint, "synthetic enamel paint, having voc ( volatile organic compound, content less than 150 gm/liitre", synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, enamel paint, white cement based putty, aluminium paint, plastic emulsion paint, water proofing cement paint, unslaked lime, "galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with, slots", galvanised steel j or l hooks 8 mm dia, "galvanished steel bolts & nuts 10 mm dia and 125 mm long round head, with slots", mild steel bolts 6 mm dia and 25 mm long with hexagonal head, "galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides, threaded with 4 galvanised steel nuts", galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i limpet washer, bitumen washer, g.i. plain washer thick, g.i. plain washer thin, g.i. plain washer for seam bolts, "8 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with, s.s. triangular plate for european type w.c.", shower rose c.p brass for 15 to 20 mm intel 100 mm dia, c.p. brass chain with 32 mm dia rubber plug, c.p.brass chain with 40 mm dia rubber plug, c.p. brass waste 32 mm, c.p. brass waste 40 mm, 15 mm c.p.brass tap, chromium plated stop cock, chromium plated angular stop cock with wall flange, pillar cock of approved make cp pillar cock - 15 mm, c.p. over brass waste fittings 32 mm, "polyethylene water storage tank with cover and suitable locking, arrangemnet", rcc pipe 450 mm dia np -3 spigot, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, c.i. bracket for wash basin and sinks, white vitreous china laboratory sink 450x300x150x mm, white vitreous china laboratory sink 600x450x200 mm, vitreous china pedestal for wash basin, vitreous china lipped front urinal, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china india type w.c. pan size 580 mm, vitreous china orrisa type w.c. pan size 580 mm, orissa pattern water closet 530x410 mm, "white vitreous china dual purpose closet (anglo indian w.c.) suitable for use as squatting pan or european type water closet as per manufacture's, specifications", "floor mounted white vitrous china double trap syphonic wc with 10 litre, cistern and all fittings,seat cover etc", coloured pedestal type w.c. pan 580x440 mm (european type) s trap, vitreous china squatting plate urinal, vitreous china pedestal type water closet, corner urinal, 32 mm dia polythene flush pipe, cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia), gi pipe 32 mm dia medium quality, gi pipe 40 mm dia medium quality, polythene bib cock / stop cock (hd) with metal/plastic inlet, "sink 630 mm x 550 mm x 180 mm with waste fittings and two coats of, painting of c.i. brackets", 15 mm swan neck tap with left & right hand operating nob with aerator, "flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings,, accessories and flush pipe)", ptmt pillar cock, ptmt push cock 15 mm dia, "waste pipe, with pvc coupling at one end fitted with necessary clamps, 900 mm long", "waste pipe, with pvc coupling at one end fitted with necessary clamps, 750 mm long", p.v.c. connector 15 mm dia 600 mm long, towel rail (cp over brass )- 600 mm, ci manhole cover 450 mm dia, "stainless steel kitchen sink - with drain board 510x 1040 mm bowl depth, 225 mm.", "upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm, dia", "upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm, dia", upvc pipes (working pressure 4 kg/cm 2) rubber (seal) ring 75 mm dia, upvc pipes (working pressure 4 kg/cm2) rubber (seal) ring 110 mm dia, upvc coupler for upvc drainage pipes 75 ,mm, upvc coupler for upvc drainage pipes 110 mm, upvc pushfit coupler (single) 75 mm thick, upvc pushfit coupler (single) 110 mm thick, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 75x75x75 mm, upvc single equal tee (with door) 110x110x110 mm, upvc bend 87.50, 75 mm bend, upvcbend 87.50, 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, upvc plain y 75 mm dia, upvc plain y 110 mm dia, "50 mmx42 mmx2 mm thick factory made door frame of pvc extruded, sections in white, grey or wooden finish", 25 mm thick factory made pvc flush door shutter, sal silliguri, other local wood, ordinary teak wood, local sal wood, solid flush type doors of commercial quality, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, "structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is: 226, is: 808 & sp (6)- 1964), weighing less than 22.5 kg/ m", "m.s. structural works in roof trusses with tubular sections conforming to, is: 806-1968 & is: 1161- 1998", m.s. structural with hollow sections (square or rectangular shape), mild steel square bars, 1.5 mm thick ms sheet, flats up to 10mm thickness, flats exceeding 10mm in thickness, collapsible gate, steel railing, mild steel plates, "steel glazed door, window/ ventilator, all members viz, f7d, f4b, k11, and k12b etc.", "openable steel windows as per is sizes with side hung shutters and, horizotal glazing bars.", ornamental grill weighing above 10 kg./sq.mtr and up to 16 kg./sq. mtr., ornamental grill weighing above 16 kg/sq. m, 2-track / 3-track aluminium sliding window, partly glazed partly paneled or fully glazed single leaf aluminium swing do, aluminium fixed partition wall of all aluminium sections, false ceiling (with 4mm thick pearl designer fibre cement board), false ceiling (with 6 mm thick fiber cement designer board), galvanished steel corrugated sheets, zn-al alloy steel sheet work in roof, precoated galvanised steel plain ridges, glass reinforced polyester translucent fiber glass sheet, glass reinforced polyester translucent ridging, "fencing post 215 cm 150 mm x 150 mm section at bottom, 100 mm x 100 mm section at top with t-base 300 mm x 150 mm x 100 mm, having 4 nos 6 mm dia vertical m.s. reinforcement and 6 mm dia binders @ 200, mm centres, finished smooth", "chain link fencing of approved quality( with galvanised ""c"" clips) to grid of horizontal strands of galvanised high tensile spring steel wire of 12, s.w.g. 5 mm. x 75 mm. x 8 g.", galvanised barbed wire 3 ply 12 gauge / 4 points, nail, jute rope, coconut rope, poly rope, wire brush, soft brush, wire mesh (rabbit), nylon net, 12mm commercial ply, autoclaved aerated cement (aac) blocks, common burnt clay f.p.s. (non modular) bricks class designation 7.5, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sq, frosted glass sheet or nominal thickness 4mm (weighing not less than 10kg, mirror of superior make glass 60x45cm, "ceramic glazed tiles ist quality minimum thickness 5mm in all colours, shades and designs except burgundy, bottle green black", "ceramic glazed tiles ist quality 300mmx300mm in all shades and designs, of white , lvory, grey, fume red brown etc.", vitrified floor tile 60x60 cm, polymer modified adhesive mortar, chequered terrazzo tiles 22 mm thick (light shade), chequered terrazzo tiles 22mm thick (medium shade), interlocking c.c. paver block (60 mm thick, m-30), bamboo 25 mm dia 2.5 meter long, bamboo 8cm to 10cm, size 6m length, bamboo basket (doko), water proofing materials, g.i. wire, sausage wire net, binding wire, silpouline sheet 15'x12', plastic sheet, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., empty gunny bag, first aid box, cowdung, stone aggrigate (single size) : 63mm nominal size, stone aggrigate (single size) : 50mm nominal size, stone aggrigate (single size) : 40mm nominal size, stone aggrigate (single size) : 25mm nominal size, stone aggrigate (single size) : 20mm nominal size, stone aggrigate (single size) : 12.5mm nominal size, stone aggrigate (single size) : 10mm nominal size, stone aggrigate (single size) : 06mm nominal size, bajiri, portland cement (opc-43 grade), galvanised steel plain sheet, mild steel round bar 12mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcement, twisted steel/ deformed tmt bars fe-500d, stone for pitching 15cm x 22.5cm, stone grit 6mm and down size or pea sized gravel, g.i. pipes 15mm dia, g.i. pipes 20mm dia, g.i. pipes 25mm dia, g.i. pipes 32mm dia, g.i. pipes 40mm dia, g.i. pipes 50mm dia, g.i. back (jam) nut 25mm dia, g.i. tees (equal) 25mm, g.i. union 15mm nominal bore, g.i. union 20mm nominal bore, g.i. union 25mm nominal bore, g.i. union 32mm nominal bore, g.i. union 40mm nominal bore, stone boulder ( 225mm-150mm ), "hire charges of shuttering plank (25mm-30mm thick) with prop including, all fittings", coarse sand (zone iii), medium sand, fine sand ( zone iv), river bed materials

Kalimpong, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

269 |Bid Value:₹ 3.70 Cr. |EMD:₹ 7.40 Lakh |23-09-2026 5 Days Left|T247 ID-103947965

supply of seam bolts and nuts 6 mm dia and 25 mm long, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 75x47x1.70 mm, bright finished or black enameled mild steel screws 50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 30 mm, bright finished or black enameled mild steel screws 25 mm, bright finished or black enameled mild steel screws 20 mm, m.s clamps 40mm x 6mm, 125mm length, oxidised mild steel butt hinges 125x90x4 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges 75x47x1.70 mm, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel tower bolt (barrel type) 100x10 mm, oxidised mild steel handles 125 mm, oxidised mild steel handles 100 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, anodised aluminium barrel / tower / socket bolt 150mm long x 10mm dia., anodised aluminium barrel / tower / socket bolt 300mm long x 10mm dia., "anodised aliminium d-type handle continuous plate base (hexagonal/, round rod) 150 mm grip x10 mm dia rod", cement concrete jali 50 mm thick, "ready mixed pink or grey primer on wood work(hard and softwood), having voc content less than 50 gms/litre", "ready mixed red oxide zinc chromatic on steel/ iron work, having voc, content less than 250 gms/litre", "water thinnable cement primer for interior wall surface, having voc, content less than 50 gms/litre", distemper primer, primer for cement paint, cement primer, acrylic distemper ist quality, having voc content less than 50 gm/litre, acrylic emulsion, having voc content less than 50 gm/litre, acrylic exterior paint, "synthetic enamel paint, having voc ( volatile organic compound, content less than 150 gm/liitre", synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, enamel paint, white cement based putty, aluminium paint, plastic emulsion paint, water proofing cement paint, unslaked lime, "galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with, slots", galvanised steel j or l hooks 8 mm dia, "galvanished steel bolts & nuts 10 mm dia and 125 mm long round head, with slots", mild steel bolts 6 mm dia and 25 mm long with hexagonal head, "galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides, threaded with 4 galvanised steel nuts", galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i limpet washer, bitumen washer, g.i. plain washer thick, g.i. plain washer thin, g.i. plain washer for seam bolts, "8 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with, s.s. triangular plate for european type w.c.", shower rose c.p brass for 15 to 20 mm intel 100 mm dia, c.p. brass chain with 32 mm dia rubber plug, c.p.brass chain with 40 mm dia rubber plug, c.p. brass waste 32 mm, c.p. brass waste 40 mm, 15 mm c.p.brass tap, chromium plated stop cock, chromium plated angular stop cock with wall flange, pillar cock of approved make cp pillar cock - 15 mm, c.p. over brass waste fittings 32 mm, "polyethylene water storage tank with cover and suitable locking, arrangemnet", rcc pipe 450 mm dia np -3 spigot, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, c.i. bracket for wash basin and sinks, white vitreous china laboratory sink 450x300x150x mm, white vitreous china laboratory sink 600x450x200 mm, vitreous china pedestal for wash basin, vitreous china lipped front urinal, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china india type w.c. pan size 580 mm, vitreous china orrisa type w.c. pan size 580 mm, orissa pattern water closet 530x410 mm, "white vitreous china dual purpose closet (anglo indian w.c.) suitable for use as squatting pan or european type water closet as per manufacture's, specifications", "floor mounted white vitrous china double trap syphonic wc with 10 litre, cistern and all fittings,seat cover etc", coloured pedestal type w.c. pan 580x440 mm (european type) s trap, vitreous china squatting plate urinal, vitreous china pedestal type water closet, corner urinal, 32 mm dia polythene flush pipe, cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia), gi pipe 32 mm dia medium quality, gi pipe 40 mm dia medium quality, polythene bib cock / stop cock (hd) with metal/plastic inlet, "sink 630 mm x 550 mm x 180 mm with waste fittings and two coats of, painting of c.i. brackets", 15 mm swan neck tap with left & right hand operating nob with aerator, "flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings,, accessories and flush pipe)", ptmt pillar cock, ptmt push cock 15 mm dia, "waste pipe, with pvc coupling at one end fitted with necessary clamps, 900 mm long", "waste pipe, with pvc coupling at one end fitted with necessary clamps, 750 mm long", p.v.c. connector 15 mm dia 600 mm long, towel rail (cp over brass )- 600 mm, ci manhole cover 450 mm dia, "stainless steel kitchen sink - with drain board 510x 1040 mm bowl depth, 225 mm.", "upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm, dia", "upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm, dia", upvc pipes (working pressure 4 kg/cm 2) rubber (seal) ring 75 mm dia, upvc pipes (working pressure 4 kg/cm2) rubber (seal) ring 110 mm dia, upvc coupler for upvc drainage pipes 75 ,mm, upvc coupler for upvc drainage pipes 110 mm, upvc pushfit coupler (single) 75 mm thick, upvc pushfit coupler (single) 110 mm thick, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 75x75x75 mm, upvc single equal tee (with door) 110x110x110 mm, upvc bend 87.50, 75 mm bend, upvcbend 87.50, 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, upvc plain y 75 mm dia, upvc plain y 110 mm dia, "50 mmx42 mmx2 mm thick factory made door frame of pvc extruded, sections in white, grey or wooden finish", 25 mm thick factory made pvc flush door shutter, sal silliguri, other local wood, ordinary teak wood, local sal wood, solid flush type doors of commercial quality, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, "structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is: 226, is: 808 & sp (6)- 1964), weighing less than 22.5 kg/ m", "m.s. structural works in roof trusses with tubular sections conforming to, is: 806-1968 & is: 1161- 1998", m.s. structural with hollow sections (square or rectangular shape), mild steel square bars, 1.5 mm thick ms sheet, flats up to 10mm thickness, flats exceeding 10mm in thickness, collapsible gate, steel railing, mild steel plates, "steel glazed door, window/ ventilator, all members viz, f7d, f4b, k11, and k12b etc.", "openable steel windows as per is sizes with side hung shutters and, horizotal glazing bars.", ornamental grill weighing above 10 kg./sq.mtr and up to 16 kg./sq. mtr., ornamental grill weighing above 16 kg/sq. m, 2-track / 3-track aluminium sliding window, partly glazed partly paneled or fully glazed single leaf aluminium swing do, aluminium fixed partition wall of all aluminium sections, false ceiling (with 4mm thick pearl designer fibre cement board), false ceiling (with 6 mm thick fiber cement designer board), galvanished steel corrugated sheets, zn-al alloy steel sheet work in roof, precoated galvanised steel plain ridges, glass reinforced polyester translucent fiber glass sheet, glass reinforced polyester translucent ridging, "fencing post 215 cm 150 mm x 150 mm section at bottom, 100 mm x 100 mm section at top with t-base 300 mm x 150 mm x 100 mm, having 4 nos 6 mm dia vertical m.s. reinforcement and 6 mm dia binders @ 200, mm centres, finished smooth", "chain link fencing of approved quality( with galvanised ""c"" clips) to grid of horizontal strands of galvanised high tensile spring steel wire of 12, s.w.g. 5 mm. x 75 mm. x 8 g.", galvanised barbed wire 3 ply 12 gauge / 4 points, nail, jute rope, coconut rope, poly rope, wire brush, soft brush, wire mesh (rabbit), nylon net, 12mm commercial ply, autoclaved aerated cement (aac) blocks, common burnt clay f.p.s. (non modular) bricks class designation 7.5, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sq, frosted glass sheet or nominal thickness 4mm (weighing not less than 10kg, mirror of superior make glass 60x45cm, "ceramic glazed tiles ist quality minimum thickness 5mm in all colours, shades and designs except burgundy, bottle green black", "ceramic glazed tiles ist quality 300mmx300mm in all shades and designs, of white , lvory, grey, fume red brown etc.", vitrified floor tile 60x60 cm, polymer modified adhesive mortar, chequered terrazzo tiles 22 mm thick (light shade), chequered terrazzo tiles 22mm thick (medium shade), interlocking c.c. paver block (60 mm thick, m-30), bamboo 25 mm dia 2.5 meter long, bamboo 8cm to 10cm, size 6m length, bamboo basket (doko), water proofing materials, g.i. wire, sausage wire net, binding wire, silpouline sheet 15'x12', plastic sheet, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., empty gunny bag, first aid box, cowdung, stone aggrigate (single size) : 63mm nominal size, stone aggrigate (single size) : 50mm nominal size, stone aggrigate (single size) : 40mm nominal size, stone aggrigate (single size) : 25mm nominal size, stone aggrigate (single size) : 20mm nominal size, stone aggrigate (single size) : 12.5mm nominal size, stone aggrigate (single size) : 10mm nominal size, stone aggrigate (single size) : 06mm nominal size, bajiri, portland cement (opc-43 grade), galvanised steel plain sheet, mild steel round bar 12mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcement, twisted steel/ deformed tmt bars fe-500d, stone for pitching 15cm x 22.5cm, stone grit 6mm and down size or pea sized gravel, g.i. pipes 15mm dia, g.i. pipes 20mm dia, g.i. pipes 25mm dia, g.i. pipes 32mm dia, g.i. pipes 40mm dia, g.i. pipes 50mm dia, g.i. back (jam) nut 25mm dia, g.i. tees (equal) 25mm, g.i. union 15mm nominal bore, g.i. union 20mm nominal bore, g.i. union 25mm nominal bore, g.i. union 32mm nominal bore, g.i. union 40mm nominal bore, stone boulder ( 225mm-150mm ), "hire charges of shuttering plank (25mm-30mm thick) with prop including, all fittings", coarse sand (zone iii), medium sand, fine sand ( zone iv), river bed materials

Kalimpong, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

270 |Bid Value:₹ 2.65 Cr. |EMD:₹ 5.31 Lakh |23-09-2026 5 Days Left|T247 ID-103947918

supply of seam bolts and nuts 6 mm dia and 25 mm long, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 75x47x1.70 mm, bright finished or black enameled mild steel screws 50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 30 mm, bright finished or black enameled mild steel screws 25 mm, bright finished or black enameled mild steel screws 20 mm, m.s clamps 40mm x 6mm, 125mm length, oxidised mild steel butt hinges 125x90x4 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges 75x47x1.70 mm, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel tower bolt (barrel type) 100x10 mm, oxidised mild steel handles 125 mm, oxidised mild steel handles 100 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, anodised aluminium barrel / tower / socket bolt 150mm long x 10mm dia., anodised aluminium barrel / tower / socket bolt 300mm long x 10mm dia., "anodised aliminium d-type handle continuous plate base (hexagonal/, round rod) 150 mm grip x10 mm dia rod", cement concrete jali 50 mm thick, "ready mixed pink or grey primer on wood work(hard and softwood), having voc content less than 50 gms/litre", "ready mixed red oxide zinc chromatic on steel/ iron work, having voc, content less than 250 gms/litre", "water thinnable cement primer for interior wall surface, having voc, content less than 50 gms/litre", distemper primer, primer for cement paint, cement primer, acrylic distemper ist quality, having voc content less than 50 gm/litre, acrylic emulsion, having voc content less than 50 gm/litre, acrylic exterior paint, "synthetic enamel paint, having voc ( volatile organic compound, content less than 150 gm/liitre", synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, enamel paint, white cement based putty, aluminium paint, plastic emulsion paint, water proofing cement paint, unslaked lime, "galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with, slots", galvanised steel j or l hooks 8 mm dia, "galvanished steel bolts & nuts 10 mm dia and 125 mm long round head, with slots", mild steel bolts 6 mm dia and 25 mm long with hexagonal head, "galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides, threaded with 4 galvanised steel nuts", galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i limpet washer, bitumen washer, g.i. plain washer thick, g.i. plain washer thin, g.i. plain washer for seam bolts, "8 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with, s.s. triangular plate for european type w.c.", shower rose c.p brass for 15 to 20 mm intel 100 mm dia, c.p. brass chain with 32 mm dia rubber plug, c.p.brass chain with 40 mm dia rubber plug, c.p. brass waste 32 mm, c.p. brass waste 40 mm, 15 mm c.p.brass tap, chromium plated stop cock, chromium plated angular stop cock with wall flange, pillar cock of approved make cp pillar cock - 15 mm, c.p. over brass waste fittings 32 mm, "polyethylene water storage tank with cover and suitable locking, arrangemnet", rcc pipe 450 mm dia np -3 spigot, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, c.i. bracket for wash basin and sinks, white vitreous china laboratory sink 450x300x150x mm, white vitreous china laboratory sink 600x450x200 mm, vitreous china pedestal for wash basin, vitreous china lipped front urinal, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china india type w.c. pan size 580 mm, vitreous china orrisa type w.c. pan size 580 mm, orissa pattern water closet 530x410 mm, "white vitreous china dual purpose closet (anglo indian w.c.) suitable for use as squatting pan or european type water closet as per manufacture's, specifications", "floor mounted white vitrous china double trap syphonic wc with 10 litre, cistern and all fittings,seat cover etc", coloured pedestal type w.c. pan 580x440 mm (european type) s trap, vitreous china squatting plate urinal, vitreous china pedestal type water closet, corner urinal, 32 mm dia polythene flush pipe, cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia), gi pipe 32 mm dia medium quality, gi pipe 40 mm dia medium quality, polythene bib cock / stop cock (hd) with metal/plastic inlet, "sink 630 mm x 550 mm x 180 mm with waste fittings and two coats of, painting of c.i. brackets", 15 mm swan neck tap with left & right hand operating nob with aerator, "flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings,, accessories and flush pipe)", ptmt pillar cock, ptmt push cock 15 mm dia, "waste pipe, with pvc coupling at one end fitted with necessary clamps, 900 mm long", "waste pipe, with pvc coupling at one end fitted with necessary clamps, 750 mm long", p.v.c. connector 15 mm dia 600 mm long, towel rail (cp over brass )- 600 mm, ci manhole cover 450 mm dia, "stainless steel kitchen sink - with drain board 510x 1040 mm bowl depth, 225 mm.", "upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm, dia", "upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm, dia", upvc pipes (working pressure 4 kg/cm 2) rubber (seal) ring 75 mm dia, upvc pipes (working pressure 4 kg/cm2) rubber (seal) ring 110 mm dia, upvc coupler for upvc drainage pipes 75 ,mm, upvc coupler for upvc drainage pipes 110 mm, upvc pushfit coupler (single) 75 mm thick, upvc pushfit coupler (single) 110 mm thick, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 75x75x75 mm, upvc single equal tee (with door) 110x110x110 mm, upvc bend 87.50, 75 mm bend, upvcbend 87.50, 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, upvc plain y 75 mm dia, upvc plain y 110 mm dia, "50 mmx42 mmx2 mm thick factory made door frame of pvc extruded, sections in white, grey or wooden finish", 25 mm thick factory made pvc flush door shutter, sal silliguri, other local wood, ordinary teak wood, local sal wood, solid flush type doors of commercial quality, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, "structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is: 226, is: 808 & sp (6)- 1964), weighing less than 22.5 kg/ m", "m.s. structural works in roof trusses with tubular sections conforming to, is: 806-1968 & is: 1161- 1998", m.s. structural with hollow sections (square or rectangular shape), mild steel square bars, 1.5 mm thick ms sheet, flats up to 10mm thickness, flats exceeding 10mm in thickness, collapsible gate, steel railing, mild steel plates, "steel glazed door, window/ ventilator, all members viz, f7d, f4b, k11, and k12b etc.", "openable steel windows as per is sizes with side hung shutters and, horizotal glazing bars.", ornamental grill weighing above 10 kg./sq.mtr and up to 16 kg./sq. mtr., ornamental grill weighing above 16 kg/sq. m, 2-track / 3-track aluminium sliding window, partly glazed partly paneled or fully glazed single leaf aluminium swing do, aluminium fixed partition wall of all aluminium sections, false ceiling (with 4mm thick pearl designer fibre cement board), false ceiling (with 6 mm thick fiber cement designer board), galvanished steel corrugated sheets, zn-al alloy steel sheet work in roof, precoated galvanised steel plain ridges, glass reinforced polyester translucent fiber glass sheet, glass reinforced polyester translucent ridging, "fencing post 215 cm 150 mm x 150 mm section at bottom, 100 mm x 100 mm section at top with t-base 300 mm x 150 mm x 100 mm, having 4 nos 6 mm dia vertical m.s. reinforcement and 6 mm dia binders @ 200, mm centres, finished smooth", "chain link fencing of approved quality( with galvanised ""c"" clips) to grid of horizontal strands of galvanised high tensile spring steel wire of 12, s.w.g. 5 mm. x 75 mm. x 8 g.", galvanised barbed wire 3 ply 12 gauge / 4 points, nail, jute rope, coconut rope, poly rope, wire brush, soft brush, wire mesh (rabbit), nylon net, 12mm commercial ply, autoclaved aerated cement (aac) blocks, common burnt clay f.p.s. (non modular) bricks class designation 7.5, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sq, frosted glass sheet or nominal thickness 4mm (weighing not less than 10kg, mirror of superior make glass 60x45cm, "ceramic glazed tiles ist quality minimum thickness 5mm in all colours, shades and designs except burgundy, bottle green black", "ceramic glazed tiles ist quality 300mmx300mm in all shades and designs, of white , lvory, grey, fume red brown etc.", vitrified floor tile 60x60 cm, polymer modified adhesive mortar, chequered terrazzo tiles 22 mm thick (light shade), chequered terrazzo tiles 22mm thick (medium shade), interlocking c.c. paver block (60 mm thick, m-30), bamboo 25 mm dia 2.5 meter long, bamboo 8cm to 10cm, size 6m length, bamboo basket (doko), water proofing materials, g.i. wire, sausage wire net, binding wire, silpouline sheet 15'x12', plastic sheet, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., empty gunny bag, first aid box, cowdung, stone aggrigate (single size) : 63mm nominal size, stone aggrigate (single size) : 50mm nominal size, stone aggrigate (single size) : 40mm nominal size, stone aggrigate (single size) : 25mm nominal size, stone aggrigate (single size) : 20mm nominal size, stone aggrigate (single size) : 12.5mm nominal size, stone aggrigate (single size) : 10mm nominal size, stone aggrigate (single size) : 06mm nominal size, bajiri, portland cement (opc-43 grade), galvanised steel plain sheet, mild steel round bar 12mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcement, twisted steel/ deformed tmt bars fe-500d, stone for pitching 15cm x 22.5cm, stone grit 6mm and down size or pea sized gravel, g.i. pipes 15mm dia, g.i. pipes 20mm dia, g.i. pipes 25mm dia, g.i. pipes 32mm dia, g.i. pipes 40mm dia, g.i. pipes 50mm dia, g.i. back (jam) nut 25mm dia, g.i. tees (equal) 25mm, g.i. union 15mm nominal bore, g.i. union 20mm nominal bore, g.i. union 25mm nominal bore, g.i. union 32mm nominal bore, g.i. union 40mm nominal bore, stone boulder ( 225mm-150mm ), "hire charges of shuttering plank (25mm-30mm thick) with prop including, all fittings", coarse sand (zone iii), medium sand, fine sand ( zone iv), river bed materials

Kalimpong, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

271 |Bid Value:₹ 2.62 Cr. |EMD:₹ 5.24 Lakh |23-09-2026 5 Days Left|T247 ID-103947977

supply of seam bolts and nuts 6 mm dia and 25 mm long, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 75x47x1.70 mm, bright finished or black enameled mild steel screws 50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 30 mm, bright finished or black enameled mild steel screws 25 mm, bright finished or black enameled mild steel screws 20 mm, m.s clamps 40mm x 6mm, 125mm length, oxidised mild steel butt hinges 125x90x4 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges 75x47x1.70 mm, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel tower bolt (barrel type) 100x10 mm, oxidised mild steel handles 125 mm, oxidised mild steel handles 100 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, anodised aluminium barrel / tower / socket bolt 150mm long x 10mm dia., anodised aluminium barrel / tower / socket bolt 300mm long x 10mm dia., "anodised aliminium d-type handle continuous plate base (hexagonal/, round rod) 150 mm grip x10 mm dia rod", cement concrete jali 50 mm thick, "ready mixed pink or grey primer on wood work(hard and softwood), having voc content less than 50 gms/litre", "ready mixed red oxide zinc chromatic on steel/ iron work, having voc, content less than 250 gms/litre", "water thinnable cement primer for interior wall surface, having voc, content less than 50 gms/litre", distemper primer, primer for cement paint, cement primer, acrylic distemper ist quality, having voc content less than 50 gm/litre, acrylic emulsion, having voc content less than 50 gm/litre, acrylic exterior paint, "synthetic enamel paint, having voc ( volatile organic compound, content less than 150 gm/liitre", synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, enamel paint, white cement based putty, aluminium paint, plastic emulsion paint, water proofing cement paint, unslaked lime, "galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with, slots", galvanised steel j or l hooks 8 mm dia, "galvanished steel bolts & nuts 10 mm dia and 125 mm long round head, with slots", mild steel bolts 6 mm dia and 25 mm long with hexagonal head, "galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides, threaded with 4 galvanised steel nuts", galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i limpet washer, bitumen washer, g.i. plain washer thick, g.i. plain washer thin, g.i. plain washer for seam bolts, "8 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with, s.s. triangular plate for european type w.c.", shower rose c.p brass for 15 to 20 mm intel 100 mm dia, c.p. brass chain with 32 mm dia rubber plug, c.p.brass chain with 40 mm dia rubber plug, c.p. brass waste 32 mm, c.p. brass waste 40 mm, 15 mm c.p.brass tap, chromium plated stop cock, chromium plated angular stop cock with wall flange, pillar cock of approved make cp pillar cock - 15 mm, c.p. over brass waste fittings 32 mm, "polyethylene water storage tank with cover and suitable locking, arrangemnet", rcc pipe 450 mm dia np -3 spigot, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, c.i. bracket for wash basin and sinks, white vitreous china laboratory sink 450x300x150x mm, white vitreous china laboratory sink 600x450x200 mm, vitreous china pedestal for wash basin, vitreous china lipped front urinal, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china india type w.c. pan size 580 mm, vitreous china orrisa type w.c. pan size 580 mm, orissa pattern water closet 530x410 mm, "white vitreous china dual purpose closet (anglo indian w.c.) suitable for use as squatting pan or european type water closet as per manufacture's, specifications", "floor mounted white vitrous china double trap syphonic wc with 10 litre, cistern and all fittings,seat cover etc", coloured pedestal type w.c. pan 580x440 mm (european type) s trap, vitreous china squatting plate urinal, vitreous china pedestal type water closet, corner urinal, 32 mm dia polythene flush pipe, cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia), gi pipe 32 mm dia medium quality, gi pipe 40 mm dia medium quality, polythene bib cock / stop cock (hd) with metal/plastic inlet, "sink 630 mm x 550 mm x 180 mm with waste fittings and two coats of, painting of c.i. brackets", 15 mm swan neck tap with left & right hand operating nob with aerator, "flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings,, accessories and flush pipe)", ptmt pillar cock, ptmt push cock 15 mm dia, "waste pipe, with pvc coupling at one end fitted with necessary clamps, 900 mm long", "waste pipe, with pvc coupling at one end fitted with necessary clamps, 750 mm long", p.v.c. connector 15 mm dia 600 mm long, towel rail (cp over brass )- 600 mm, ci manhole cover 450 mm dia, "stainless steel kitchen sink - with drain board 510x 1040 mm bowl depth, 225 mm.", "upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm, dia", "upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm, dia", upvc pipes (working pressure 4 kg/cm 2) rubber (seal) ring 75 mm dia, upvc pipes (working pressure 4 kg/cm2) rubber (seal) ring 110 mm dia, upvc coupler for upvc drainage pipes 75 ,mm, upvc coupler for upvc drainage pipes 110 mm, upvc pushfit coupler (single) 75 mm thick, upvc pushfit coupler (single) 110 mm thick, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 75x75x75 mm, upvc single equal tee (with door) 110x110x110 mm, upvc bend 87.50, 75 mm bend, upvcbend 87.50, 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, upvc plain y 75 mm dia, upvc plain y 110 mm dia, "50 mmx42 mmx2 mm thick factory made door frame of pvc extruded, sections in white, grey or wooden finish", 25 mm thick factory made pvc flush door shutter, sal silliguri, other local wood, ordinary teak wood, local sal wood, solid flush type doors of commercial quality, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, "structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is: 226, is: 808 & sp (6)- 1964), weighing less than 22.5 kg/ m", "m.s. structural works in roof trusses with tubular sections conforming to, is: 806-1968 & is: 1161- 1998", m.s. structural with hollow sections (square or rectangular shape), mild steel square bars, 1.5 mm thick ms sheet, flats up to 10mm thickness, flats exceeding 10mm in thickness, collapsible gate, steel railing, mild steel plates, "steel glazed door, window/ ventilator, all members viz, f7d, f4b, k11, and k12b etc.", "openable steel windows as per is sizes with side hung shutters and, horizotal glazing bars.", ornamental grill weighing above 10 kg./sq.mtr and up to 16 kg./sq. mtr., ornamental grill weighing above 16 kg/sq. m, 2-track / 3-track aluminium sliding window, partly glazed partly paneled or fully glazed single leaf aluminium swing do, aluminium fixed partition wall of all aluminium sections, false ceiling (with 4mm thick pearl designer fibre cement board), false ceiling (with 6 mm thick fiber cement designer board), galvanished steel corrugated sheets, zn-al alloy steel sheet work in roof, precoated galvanised steel plain ridges, glass reinforced polyester translucent fiber glass sheet, glass reinforced polyester translucent ridging, "fencing post 215 cm 150 mm x 150 mm section at bottom, 100 mm x 100 mm section at top with t-base 300 mm x 150 mm x 100 mm, having 4 nos 6 mm dia vertical m.s. reinforcement and 6 mm dia binders @ 200, mm centres, finished smooth", "chain link fencing of approved quality( with galvanised ""c"" clips) to grid of horizontal strands of galvanised high tensile spring steel wire of 12, s.w.g. 5 mm. x 75 mm. x 8 g.", galvanised barbed wire 3 ply 12 gauge / 4 points, nail, jute rope, coconut rope, poly rope, wire brush, soft brush, wire mesh (rabbit), nylon net, 12mm commercial ply, autoclaved aerated cement (aac) blocks, common burnt clay f.p.s. (non modular) bricks class designation 7.5, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sq, frosted glass sheet or nominal thickness 4mm (weighing not less than 10kg, mirror of superior make glass 60x45cm, "ceramic glazed tiles ist quality minimum thickness 5mm in all colours, shades and designs except burgundy, bottle green black", "ceramic glazed tiles ist quality 300mmx300mm in all shades and designs, of white , lvory, grey, fume red brown etc.", vitrified floor tile 60x60 cm, polymer modified adhesive mortar, chequered terrazzo tiles 22 mm thick (light shade), chequered terrazzo tiles 22mm thick (medium shade), interlocking c.c. paver block (60 mm thick, m-30), bamboo 25 mm dia 2.5 meter long, bamboo 8cm to 10cm, size 6m length, bamboo basket (doko), water proofing materials, g.i. wire, sausage wire net, binding wire, silpouline sheet 15'x12', plastic sheet, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., empty gunny bag, first aid box, cowdung, stone aggrigate (single size) : 63mm nominal size, stone aggrigate (single size) : 50mm nominal size, stone aggrigate (single size) : 40mm nominal size, stone aggrigate (single size) : 25mm nominal size, stone aggrigate (single size) : 20mm nominal size, stone aggrigate (single size) : 12.5mm nominal size, stone aggrigate (single size) : 10mm nominal size, stone aggrigate (single size) : 06mm nominal size, bajiri, portland cement (opc-43 grade), galvanised steel plain sheet, mild steel round bar 12mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcement, twisted steel/ deformed tmt bars fe-500d, stone for pitching 15cm x 22.5cm, stone grit 6mm and down size or pea sized gravel, g.i. pipes 15mm dia, g.i. pipes 20mm dia, g.i. pipes 25mm dia, g.i. pipes 32mm dia, g.i. pipes 40mm dia, g.i. pipes 50mm dia, g.i. back (jam) nut 25mm dia, g.i. tees (equal) 25mm, g.i. union 15mm nominal bore, g.i. union 20mm nominal bore, g.i. union 25mm nominal bore, g.i. union 32mm nominal bore, g.i. union 40mm nominal bore, stone boulder ( 225mm-150mm ), "hire charges of shuttering plank (25mm-30mm thick) with prop including, all fittings", coarse sand (zone iii), medium sand, fine sand ( zone iv), river bed materials

Darjeeling, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

272 |Bid Value:₹ 2.39 Cr. |EMD:₹ 4.78 Lakh |23-09-2026 5 Days Left|T247 ID-103947976

supply of seam bolts and nuts 6 mm dia and 25 mm long, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 75x47x1.70 mm, bright finished or black enameled mild steel screws 50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 30 mm, bright finished or black enameled mild steel screws 25 mm, bright finished or black enameled mild steel screws 20 mm, m.s clamps 40mm x 6mm, 125mm length, oxidised mild steel butt hinges 125x90x4 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges 75x47x1.70 mm, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel tower bolt (barrel type) 100x10 mm, oxidised mild steel handles 125 mm, oxidised mild steel handles 100 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, anodised aluminium barrel / tower / socket bolt 150mm long x 10mm dia., anodised aluminium barrel / tower / socket bolt 300mm long x 10mm dia., "anodised aliminium d-type handle continuous plate base (hexagonal/, round rod) 150 mm grip x10 mm dia rod", cement concrete jali 50 mm thick, "ready mixed pink or grey primer on wood work(hard and softwood), having voc content less than 50 gms/litre", "ready mixed red oxide zinc chromatic on steel/ iron work, having voc, content less than 250 gms/litre", "water thinnable cement primer for interior wall surface, having voc, content less than 50 gms/litre", distemper primer, primer for cement paint, cement primer, acrylic distemper ist quality, having voc content less than 50 gm/litre, acrylic emulsion, having voc content less than 50 gm/litre, acrylic exterior paint, "synthetic enamel paint, having voc ( volatile organic compound, content less than 150 gm/liitre", synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, enamel paint, white cement based putty, aluminium paint, plastic emulsion paint, water proofing cement paint, unslaked lime, "galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with, slots", galvanised steel j or l hooks 8 mm dia, "galvanished steel bolts & nuts 10 mm dia and 125 mm long round head, with slots", mild steel bolts 6 mm dia and 25 mm long with hexagonal head, "galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides, threaded with 4 galvanised steel nuts", galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i limpet washer, bitumen washer, g.i. plain washer thick, g.i. plain washer thin, g.i. plain washer for seam bolts, "8 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with, s.s. triangular plate for european type w.c.", shower rose c.p brass for 15 to 20 mm intel 100 mm dia, c.p. brass chain with 32 mm dia rubber plug, c.p.brass chain with 40 mm dia rubber plug, c.p. brass waste 32 mm, c.p. brass waste 40 mm, 15 mm c.p.brass tap, chromium plated stop cock, chromium plated angular stop cock with wall flange, pillar cock of approved make cp pillar cock - 15 mm, c.p. over brass waste fittings 32 mm, "polyethylene water storage tank with cover and suitable locking, arrangemnet", rcc pipe 450 mm dia np -3 spigot, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, c.i. bracket for wash basin and sinks, white vitreous china laboratory sink 450x300x150x mm, white vitreous china laboratory sink 600x450x200 mm, vitreous china pedestal for wash basin, vitreous china lipped front urinal, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china india type w.c. pan size 580 mm, vitreous china orrisa type w.c. pan size 580 mm, orissa pattern water closet 530x410 mm, "white vitreous china dual purpose closet (anglo indian w.c.) suitable for use as squatting pan or european type water closet as per manufacture's, specifications", "floor mounted white vitrous china double trap syphonic wc with 10 litre, cistern and all fittings,seat cover etc", coloured pedestal type w.c. pan 580x440 mm (european type) s trap, vitreous china squatting plate urinal, vitreous china pedestal type water closet, corner urinal, 32 mm dia polythene flush pipe, cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia), gi pipe 32 mm dia medium quality, gi pipe 40 mm dia medium quality, polythene bib cock / stop cock (hd) with metal/plastic inlet, "sink 630 mm x 550 mm x 180 mm with waste fittings and two coats of, painting of c.i. brackets", 15 mm swan neck tap with left & right hand operating nob with aerator, "flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings,, accessories and flush pipe)", ptmt pillar cock, ptmt push cock 15 mm dia, "waste pipe, with pvc coupling at one end fitted with necessary clamps, 900 mm long", "waste pipe, with pvc coupling at one end fitted with necessary clamps, 750 mm long", p.v.c. connector 15 mm dia 600 mm long, towel rail (cp over brass )- 600 mm, ci manhole cover 450 mm dia, "stainless steel kitchen sink - with drain board 510x 1040 mm bowl depth, 225 mm.", "upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm, dia", "upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm, dia", upvc pipes (working pressure 4 kg/cm 2) rubber (seal) ring 75 mm dia, upvc pipes (working pressure 4 kg/cm2) rubber (seal) ring 110 mm dia, upvc coupler for upvc drainage pipes 75 ,mm, upvc coupler for upvc drainage pipes 110 mm, upvc pushfit coupler (single) 75 mm thick, upvc pushfit coupler (single) 110 mm thick, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 75x75x75 mm, upvc single equal tee (with door) 110x110x110 mm, upvc bend 87.50, 75 mm bend, upvcbend 87.50, 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, upvc plain y 75 mm dia, upvc plain y 110 mm dia, "50 mmx42 mmx2 mm thick factory made door frame of pvc extruded, sections in white, grey or wooden finish", 25 mm thick factory made pvc flush door shutter, sal silliguri, other local wood, ordinary teak wood, local sal wood, solid flush type doors of commercial quality, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, "structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is: 226, is: 808 & sp (6)- 1964), weighing less than 22.5 kg/ m", "m.s. structural works in roof trusses with tubular sections conforming to, is: 806-1968 & is: 1161- 1998", m.s. structural with hollow sections (square or rectangular shape), mild steel square bars, 1.5 mm thick ms sheet, flats up to 10mm thickness, flats exceeding 10mm in thickness, collapsible gate, steel railing, mild steel plates, "steel glazed door, window/ ventilator, all members viz, f7d, f4b, k11, and k12b etc.", "openable steel windows as per is sizes with side hung shutters and, horizotal glazing bars.", ornamental grill weighing above 10 kg./sq.mtr and up to 16 kg./sq. mtr., ornamental grill weighing above 16 kg/sq. m, 2-track / 3-track aluminium sliding window, partly glazed partly paneled or fully glazed single leaf aluminium swing do, aluminium fixed partition wall of all aluminium sections, false ceiling (with 4mm thick pearl designer fibre cement board), false ceiling (with 6 mm thick fiber cement designer board), galvanished steel corrugated sheets, zn-al alloy steel sheet work in roof, precoated galvanised steel plain ridges, glass reinforced polyester translucent fiber glass sheet, glass reinforced polyester translucent ridging, "fencing post 215 cm 150 mm x 150 mm section at bottom, 100 mm x 100 mm section at top with t-base 300 mm x 150 mm x 100 mm, having 4 nos 6 mm dia vertical m.s. reinforcement and 6 mm dia binders @ 200, mm centres, finished smooth", "chain link fencing of approved quality( with galvanised ""c"" clips) to grid of horizontal strands of galvanised high tensile spring steel wire of 12, s.w.g. 5 mm. x 75 mm. x 8 g.", galvanised barbed wire 3 ply 12 gauge / 4 points, nail, jute rope, coconut rope, poly rope, wire brush, soft brush, wire mesh (rabbit), nylon net, 12mm commercial ply, autoclaved aerated cement (aac) blocks, common burnt clay f.p.s. (non modular) bricks class designation 7.5, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sq, frosted glass sheet or nominal thickness 4mm (weighing not less than 10kg, mirror of superior make glass 60x45cm, "ceramic glazed tiles ist quality minimum thickness 5mm in all colours, shades and designs except burgundy, bottle green black", "ceramic glazed tiles ist quality 300mmx300mm in all shades and designs, of white , lvory, grey, fume red brown etc.", vitrified floor tile 60x60 cm, polymer modified adhesive mortar, chequered terrazzo tiles 22 mm thick (light shade), chequered terrazzo tiles 22mm thick (medium shade), interlocking c.c. paver block (60 mm thick, m-30), bamboo 25 mm dia 2.5 meter long, bamboo 8cm to 10cm, size 6m length, bamboo basket (doko), water proofing materials, g.i. wire, sausage wire net, binding wire, silpouline sheet 15'x12', plastic sheet, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., empty gunny bag, first aid box, cowdung, stone aggrigate (single size) : 63mm nominal size, stone aggrigate (single size) : 50mm nominal size, stone aggrigate (single size) : 40mm nominal size, stone aggrigate (single size) : 25mm nominal size, stone aggrigate (single size) : 20mm nominal size, stone aggrigate (single size) : 12.5mm nominal size, stone aggrigate (single size) : 10mm nominal size, stone aggrigate (single size) : 06mm nominal size, bajiri, portland cement (opc-43 grade), galvanised steel plain sheet, mild steel round bar 12mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcement, twisted steel/ deformed tmt bars fe-500d, stone for pitching 15cm x 22.5cm, stone grit 6mm and down size or pea sized gravel, g.i. pipes 15mm dia, g.i. pipes 20mm dia, g.i. pipes 25mm dia, g.i. pipes 32mm dia, g.i. pipes 40mm dia, g.i. pipes 50mm dia, g.i. back (jam) nut 25mm dia, g.i. tees (equal) 25mm, g.i. union 15mm nominal bore, g.i. union 20mm nominal bore, g.i. union 25mm nominal bore, g.i. union 32mm nominal bore, g.i. union 40mm nominal bore, stone boulder ( 225mm-150mm ), "hire charges of shuttering plank (25mm-30mm thick) with prop including, all fittings", coarse sand (zone iii), medium sand, fine sand ( zone iv), river bed materials

Darjeeling, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

273 |Bid Value:₹ 1.85 Cr. |EMD:₹ 3.69 Lakh |23-09-2026 5 Days Left|T247 ID-103969923

supply of seam bolts and nuts 6 mm dia and 25 mm long, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 75x47x1.70 mm, bright finished or black enameled mild steel screws 50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 30 mm, bright finished or black enameled mild steel screws 25 mm, bright finished or black enameled mild steel screws 20 mm, m.s clamps 40mm x 6mm, 125mm length, oxidised mild steel butt hinges 125x90x4 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges 75x47x1.70 mm, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel tower bolt (barrel type) 100x10 mm, oxidised mild steel handles 125 mm, oxidised mild steel handles 100 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, anodised aluminium barrel / tower / socket bolt 150mm long x 10mm dia., anodised aluminium barrel / tower / socket bolt 300mm long x 10mm dia., "anodised aliminium d-type handle continuous plate base (hexagonal/, round rod) 150 mm grip x10 mm dia rod", cement concrete jali 50 mm thick, "ready mixed pink or grey primer on wood work(hard and softwood), having voc content less than 50 gms/litre", "ready mixed red oxide zinc chromatic on steel/ iron work, having voc, content less than 250 gms/litre", "water thinnable cement primer for interior wall surface, having voc, content less than 50 gms/litre", distemper primer, primer for cement paint, cement primer, acrylic distemper ist quality, having voc content less than 50 gm/litre, acrylic emulsion, having voc content less than 50 gm/litre, acrylic exterior paint, "synthetic enamel paint, having voc ( volatile organic compound, content less than 150 gm/liitre", synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, enamel paint, white cement based putty, aluminium paint, plastic emulsion paint, water proofing cement paint, unslaked lime, "galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with, slots", galvanised steel j or l hooks 8 mm dia, "galvanished steel bolts & nuts 10 mm dia and 125 mm long round head, with slots", mild steel bolts 6 mm dia and 25 mm long with hexagonal head, "galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides, threaded with 4 galvanised steel nuts", galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i limpet washer, bitumen washer, g.i. plain washer thick, g.i. plain washer thin, g.i. plain washer for seam bolts, "8 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with, s.s. triangular plate for european type w.c.", shower rose c.p brass for 15 to 20 mm intel 100 mm dia, c.p. brass chain with 32 mm dia rubber plug, c.p.brass chain with 40 mm dia rubber plug, c.p. brass waste 32 mm, c.p. brass waste 40 mm, 15 mm c.p.brass tap, chromium plated stop cock, chromium plated angular stop cock with wall flange, pillar cock of approved make cp pillar cock - 15 mm, c.p. over brass waste fittings 32 mm, "polyethylene water storage tank with cover and suitable locking, arrangemnet", rcc pipe 450 mm dia np -3 spigot, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, c.i. bracket for wash basin and sinks, white vitreous china laboratory sink 450x300x150x mm, white vitreous china laboratory sink 600x450x200 mm, vitreous china pedestal for wash basin, vitreous china lipped front urinal, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china india type w.c. pan size 580 mm, vitreous china orrisa type w.c. pan size 580 mm, orissa pattern water closet 530x410 mm, "white vitreous china dual purpose closet (anglo indian w.c.) suitable for use as squatting pan or european type water closet as per manufacture's, specifications", "floor mounted white vitrous china double trap syphonic wc with 10 litre, cistern and all fittings,seat cover etc", coloured pedestal type w.c. pan 580x440 mm (european type) s trap, vitreous china squatting plate urinal, vitreous china pedestal type water closet, corner urinal, 32 mm dia polythene flush pipe, cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia), gi pipe 32 mm dia medium quality, gi pipe 40 mm dia medium quality, polythene bib cock / stop cock (hd) with metal/plastic inlet, "sink 630 mm x 550 mm x 180 mm with waste fittings and two coats of, painting of c.i. brackets", 15 mm swan neck tap with left & right hand operating nob with aerator, "flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings,, accessories and flush pipe)", ptmt pillar cock, ptmt push cock 15 mm dia, "waste pipe, with pvc coupling at one end fitted with necessary clamps, 900 mm long", "waste pipe, with pvc coupling at one end fitted with necessary clamps, 750 mm long", p.v.c. connector 15 mm dia 600 mm long, towel rail (cp over brass )- 600 mm, ci manhole cover 450 mm dia, "stainless steel kitchen sink - with drain board 510x 1040 mm bowl depth, 225 mm.", "upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm, dia", "upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm, dia", upvc pipes (working pressure 4 kg/cm 2) rubber (seal) ring 75 mm dia, upvc pipes (working pressure 4 kg/cm2) rubber (seal) ring 110 mm dia, upvc coupler for upvc drainage pipes 75 ,mm, upvc coupler for upvc drainage pipes 110 mm, upvc pushfit coupler (single) 75 mm thick, upvc pushfit coupler (single) 110 mm thick, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 75x75x75 mm, upvc single equal tee (with door) 110x110x110 mm, upvc bend 87.50, 75 mm bend, upvcbend 87.50, 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, upvc plain y 75 mm dia, upvc plain y 110 mm dia, "50 mmx42 mmx2 mm thick factory made door frame of pvc extruded, sections in white, grey or wooden finish", 25 mm thick factory made pvc flush door shutter, sal silliguri, other local wood, ordinary teak wood, local sal wood, solid flush type doors of commercial quality, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, "structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is: 226, is: 808 & sp (6)- 1964), weighing less than 22.5 kg/ m", "m.s. structural works in roof trusses with tubular sections conforming to, is: 806-1968 & is: 1161- 1998", m.s. structural with hollow sections (square or rectangular shape), mild steel square bars, 1.5 mm thick ms sheet, flats up to 10mm thickness, flats exceeding 10mm in thickness, collapsible gate, steel railing, mild steel plates, "steel glazed door, window/ ventilator, all members viz, f7d, f4b, k11, and k12b etc.", "openable steel windows as per is sizes with side hung shutters and, horizotal glazing bars.", ornamental grill weighing above 10 kg./sq.mtr and up to 16 kg./sq. mtr., ornamental grill weighing above 16 kg/sq. m, 2-track / 3-track aluminium sliding window, partly glazed partly paneled or fully glazed single leaf aluminium swing do, aluminium fixed partition wall of all aluminium sections, false ceiling (with 4mm thick pearl designer fibre cement board), false ceiling (with 6 mm thick fiber cement designer board), galvanished steel corrugated sheets, zn-al alloy steel sheet work in roof, precoated galvanised steel plain ridges, glass reinforced polyester translucent fiber glass sheet, glass reinforced polyester translucent ridging, "fencing post 215 cm 150 mm x 150 mm section at bottom, 100 mm x 100 mm section at top with t-base 300 mm x 150 mm x 100 mm, having 4 nos 6 mm dia vertical m.s. reinforcement and 6 mm dia binders @ 200, mm centres, finished smooth", "chain link fencing of approved quality( with galvanised ""c"" clips) to grid of horizontal strands of galvanised high tensile spring steel wire of 12, s.w.g. 5 mm. x 75 mm. x 8 g.", galvanised barbed wire 3 ply 12 gauge / 4 points, nail, jute rope, coconut rope, poly rope, wire brush, soft brush, wire mesh (rabbit), nylon net, 12mm commercial ply, autoclaved aerated cement (aac) blocks, common burnt clay f.p.s. (non modular) bricks class designation 7.5, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sq, frosted glass sheet or nominal thickness 4mm (weighing not less than 10kg, mirror of superior make glass 60x45cm, "ceramic glazed tiles ist quality minimum thickness 5mm in all colours, shades and designs except burgundy, bottle green black", "ceramic glazed tiles ist quality 300mmx300mm in all shades and designs, of white , lvory, grey, fume red brown etc.", vitrified floor tile 60x60 cm, polymer modified adhesive mortar, chequered terrazzo tiles 22 mm thick (light shade), chequered terrazzo tiles 22mm thick (medium shade), interlocking c.c. paver block (60 mm thick, m-30), bamboo 25 mm dia 2.5 meter long, bamboo 8cm to 10cm, size 6m length, bamboo basket (doko), water proofing materials, g.i. wire, sausage wire net, binding wire, silpouline sheet 15'x12', plastic sheet, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., empty gunny bag, first aid box, cowdung, stone aggrigate (single size) : 63mm nominal size, stone aggrigate (single size) : 50mm nominal size, stone aggrigate (single size) : 40mm nominal size, stone aggrigate (single size) : 25mm nominal size, stone aggrigate (single size) : 20mm nominal size, stone aggrigate (single size) : 12.5mm nominal size, stone aggrigate (single size) : 10mm nominal size, stone aggrigate (single size) : 06mm nominal size, bajiri, portland cement (opc-43 grade), galvanised steel plain sheet, mild steel round bar 12mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcement, twisted steel/ deformed tmt bars fe-500d, stone for pitching 15cm x 22.5cm, stone grit 6mm and down size or pea sized gravel, g.i. pipes 15mm dia, g.i. pipes 20mm dia, g.i. pipes 25mm dia, g.i. pipes 32mm dia, g.i. pipes 40mm dia, g.i. pipes 50mm dia, g.i. back (jam) nut 25mm dia, g.i. tees (equal) 25mm, g.i. union 15mm nominal bore, g.i. union 20mm nominal bore, g.i. union 25mm nominal bore, g.i. union 32mm nominal bore, g.i. union 40mm nominal bore, stone boulder ( 225mm-150mm ), "hire charges of shuttering plank (25mm-30mm thick) with prop including, all fittings", coarse sand (zone iii), medium sand, fine sand ( zone iv), river bed materials

Darjeeling, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

274 |Bid Value:₹ 1.78 Cr. |EMD:₹ 3.56 Lakh |23-09-2026 5 Days Left|T247 ID-103969935

supply of seam bolts and nuts 6 mm dia and 25 mm long, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 75x47x1.70 mm, bright finished or black enameled mild steel screws 50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 30 mm, bright finished or black enameled mild steel screws 25 mm, bright finished or black enameled mild steel screws 20 mm, m.s clamps 40mm x 6mm, 125mm length, oxidised mild steel butt hinges 125x90x4 mm, oxidised mild steel butt hinges 100x58x1.90 mm, oxidised mild steel butt hinges 75x47x1.70 mm, oxidised mild steel tower bolt (barrel type) 150x10 mm, oxidised mild steel tower bolt (barrel type) 100x10 mm, oxidised mild steel handles 125 mm, oxidised mild steel handles 100 mm, oxidised mild steel screws 50 mm, oxidised mild steel screws 40 mm, oxidised mild steel screws 30 mm, oxidised mild steel screws 25 mm, oxidised mild steel screws 20 mm, anodised aluminium barrel / tower / socket bolt 150mm long x 10mm dia., anodised aluminium barrel / tower / socket bolt 300mm long x 10mm dia., "anodised aliminium d-type handle continuous plate base (hexagonal/, round rod) 150 mm grip x10 mm dia rod", cement concrete jali 50 mm thick, "ready mixed pink or grey primer on wood work(hard and softwood), having voc content less than 50 gms/litre", "ready mixed red oxide zinc chromatic on steel/ iron work, having voc, content less than 250 gms/litre", "water thinnable cement primer for interior wall surface, having voc, content less than 50 gms/litre", distemper primer, primer for cement paint, cement primer, acrylic distemper ist quality, having voc content less than 50 gm/litre, acrylic emulsion, having voc content less than 50 gm/litre, acrylic exterior paint, "synthetic enamel paint, having voc ( volatile organic compound, content less than 150 gm/liitre", synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, enamel paint, white cement based putty, aluminium paint, plastic emulsion paint, water proofing cement paint, unslaked lime, "galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with, slots", galvanised steel j or l hooks 8 mm dia, "galvanished steel bolts & nuts 10 mm dia and 125 mm long round head, with slots", mild steel bolts 6 mm dia and 25 mm long with hexagonal head, "galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides, threaded with 4 galvanised steel nuts", galvanised steel bolts 10 mm dia and 7 cm long with nuts, g.i limpet washer, bitumen washer, g.i. plain washer thick, g.i. plain washer thin, g.i. plain washer for seam bolts, "8 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with, s.s. triangular plate for european type w.c.", shower rose c.p brass for 15 to 20 mm intel 100 mm dia, c.p. brass chain with 32 mm dia rubber plug, c.p.brass chain with 40 mm dia rubber plug, c.p. brass waste 32 mm, c.p. brass waste 40 mm, 15 mm c.p.brass tap, chromium plated stop cock, chromium plated angular stop cock with wall flange, pillar cock of approved make cp pillar cock - 15 mm, c.p. over brass waste fittings 32 mm, "polyethylene water storage tank with cover and suitable locking, arrangemnet", rcc pipe 450 mm dia np -3 spigot, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, c.i. bracket for wash basin and sinks, white vitreous china laboratory sink 450x300x150x mm, white vitreous china laboratory sink 600x450x200 mm, vitreous china pedestal for wash basin, vitreous china lipped front urinal, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china india type w.c. pan size 580 mm, vitreous china orrisa type w.c. pan size 580 mm, orissa pattern water closet 530x410 mm, "white vitreous china dual purpose closet (anglo indian w.c.) suitable for use as squatting pan or european type water closet as per manufacture's, specifications", "floor mounted white vitrous china double trap syphonic wc with 10 litre, cistern and all fittings,seat cover etc", coloured pedestal type w.c. pan 580x440 mm (european type) s trap, vitreous china squatting plate urinal, vitreous china pedestal type water closet, corner urinal, 32 mm dia polythene flush pipe, cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia), cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia), gi pipe 32 mm dia medium quality, gi pipe 40 mm dia medium quality, polythene bib cock / stop cock (hd) with metal/plastic inlet, "sink 630 mm x 550 mm x 180 mm with waste fittings and two coats of, painting of c.i. brackets", 15 mm swan neck tap with left & right hand operating nob with aerator, "flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings,, accessories and flush pipe)", ptmt pillar cock, ptmt push cock 15 mm dia, "waste pipe, with pvc coupling at one end fitted with necessary clamps, 900 mm long", "waste pipe, with pvc coupling at one end fitted with necessary clamps, 750 mm long", p.v.c. connector 15 mm dia 600 mm long, towel rail (cp over brass )- 600 mm, ci manhole cover 450 mm dia, "stainless steel kitchen sink - with drain board 510x 1040 mm bowl depth, 225 mm.", "upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm, dia", "upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm, dia", upvc pipes (working pressure 4 kg/cm 2) rubber (seal) ring 75 mm dia, upvc pipes (working pressure 4 kg/cm2) rubber (seal) ring 110 mm dia, upvc coupler for upvc drainage pipes 75 ,mm, upvc coupler for upvc drainage pipes 110 mm, upvc pushfit coupler (single) 75 mm thick, upvc pushfit coupler (single) 110 mm thick, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 75x75x75 mm, upvc single equal tee (with door) 110x110x110 mm, upvc bend 87.50, 75 mm bend, upvcbend 87.50, 110 mm bend, upvc plain shoe 75 mm bend, upvc plain shoe 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, upvc plain y 75 mm dia, upvc plain y 110 mm dia, "50 mmx42 mmx2 mm thick factory made door frame of pvc extruded, sections in white, grey or wooden finish", 25 mm thick factory made pvc flush door shutter, sal silliguri, other local wood, ordinary teak wood, local sal wood, solid flush type doors of commercial quality, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, "structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is: 226, is: 808 & sp (6)- 1964), weighing less than 22.5 kg/ m", "m.s. structural works in roof trusses with tubular sections conforming to, is: 806-1968 & is: 1161- 1998", m.s. structural with hollow sections (square or rectangular shape), mild steel square bars, 1.5 mm thick ms sheet, flats up to 10mm thickness, flats exceeding 10mm in thickness, collapsible gate, steel railing, mild steel plates, "steel glazed door, window/ ventilator, all members viz, f7d, f4b, k11, and k12b etc.", "openable steel windows as per is sizes with side hung shutters and, horizotal glazing bars.", ornamental grill weighing above 10 kg./sq.mtr and up to 16 kg./sq. mtr., ornamental grill weighing above 16 kg/sq. m, 2-track / 3-track aluminium sliding window, partly glazed partly paneled or fully glazed single leaf aluminium swing do, aluminium fixed partition wall of all aluminium sections, false ceiling (with 4mm thick pearl designer fibre cement board), false ceiling (with 6 mm thick fiber cement designer board), galvanished steel corrugated sheets, zn-al alloy steel sheet work in roof, precoated galvanised steel plain ridges, glass reinforced polyester translucent fiber glass sheet, glass reinforced polyester translucent ridging, "fencing post 215 cm 150 mm x 150 mm section at bottom, 100 mm x 100 mm section at top with t-base 300 mm x 150 mm x 100 mm, having 4 nos 6 mm dia vertical m.s. reinforcement and 6 mm dia binders @ 200, mm centres, finished smooth", "chain link fencing of approved quality( with galvanised ""c"" clips) to grid of horizontal strands of galvanised high tensile spring steel wire of 12, s.w.g. 5 mm. x 75 mm. x 8 g.", galvanised barbed wire 3 ply 12 gauge / 4 points, nail, jute rope, coconut rope, poly rope, wire brush, soft brush, wire mesh (rabbit), nylon net, 12mm commercial ply, autoclaved aerated cement (aac) blocks, common burnt clay f.p.s. (non modular) bricks class designation 7.5, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sq, frosted glass sheet or nominal thickness 4mm (weighing not less than 10kg, mirror of superior make glass 60x45cm, "ceramic glazed tiles ist quality minimum thickness 5mm in all colours, shades and designs except burgundy, bottle green black", "ceramic glazed tiles ist quality 300mmx300mm in all shades and designs, of white , lvory, grey, fume red brown etc.", vitrified floor tile 60x60 cm, polymer modified adhesive mortar, chequered terrazzo tiles 22 mm thick (light shade), chequered terrazzo tiles 22mm thick (medium shade), interlocking c.c. paver block (60 mm thick, m-30), bamboo 25 mm dia 2.5 meter long, bamboo 8cm to 10cm, size 6m length, bamboo basket (doko), water proofing materials, g.i. wire, sausage wire net, binding wire, silpouline sheet 15'x12', plastic sheet, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., empty gunny bag, first aid box, cowdung, stone aggrigate (single size) : 63mm nominal size, stone aggrigate (single size) : 50mm nominal size, stone aggrigate (single size) : 40mm nominal size, stone aggrigate (single size) : 25mm nominal size, stone aggrigate (single size) : 20mm nominal size, stone aggrigate (single size) : 12.5mm nominal size, stone aggrigate (single size) : 10mm nominal size, stone aggrigate (single size) : 06mm nominal size, bajiri, portland cement (opc-43 grade), galvanised steel plain sheet, mild steel round bar 12mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcement, twisted steel/ deformed tmt bars fe-500d, stone for pitching 15cm x 22.5cm, stone grit 6mm and down size or pea sized gravel, g.i. pipes 15mm dia, g.i. pipes 20mm dia, g.i. pipes 25mm dia, g.i. pipes 32mm dia, g.i. pipes 40mm dia, g.i. pipes 50mm dia, g.i. back (jam) nut 25mm dia, g.i. tees (equal) 25mm, g.i. union 15mm nominal bore, g.i. union 20mm nominal bore, g.i. union 25mm nominal bore, g.i. union 32mm nominal bore, g.i. union 40mm nominal bore, stone boulder ( 225mm-150mm ), "hire charges of shuttering plank (25mm-30mm thick) with prop including, all fittings", coarse sand (zone iii), medium sand, fine sand ( zone iv), river bed materials

Darjeeling, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

275 |Bid Value:₹ 1.50 Cr. |EMD:₹ Refer Docs |03-10-2026 15 Days Left|T247 ID-104309532

Vadodara, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

276 |Bid Value:₹ 1.50 Cr. |EMD:₹ 7.50 Lakh |01-10-2026 13 Days Left|T247 ID-104309556

Vadodara, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

502+ Latest Feeders Tenders

Live Feeders Tenders 2026

Tiruchirappalli, Tamil Nadu, India

Gandhinagar, Gujarat, India

Dantewada, Chhattisgarh, India

Jagatsinghpur, Orissa, India

Bankura, West Bengal, India

Bankura, West Bengal, India

Dhanbad, Jharkhand, India

Secunderabad, Telangana, India

Tuticorin, Tamil Nadu, India

Bellary, Karnataka, India

Wayanad, Kerala, India

Secunderabad, Telangana, India

Trichy, Tamil Nadu, India

Kolkata, West Bengal, India

Anand, Gujarat, India

Ahmedabad, Gujarat, India

Dahod, Gujarat, India

Pathankot, Punjab, India

Chandrapur, Maharashtra, India

Thane, Maharashtra, India

Darjeeling, West Bengal, India

Sidhi, Madhya Pradesh, India

Raipur, Chhattisgarh, India

Pathankot, Punjab, India

Darjeeling, West Bengal, India

Darjeeling, West Bengal, India

Darjeeling, West Bengal, India

Kalimpong, West Bengal, India

Kalimpong, West Bengal, India

Kalimpong, West Bengal, India

Darjeeling, West Bengal, India

Darjeeling, West Bengal, India

Darjeeling, West Bengal, India

Darjeeling, West Bengal, India

Vadodara, Gujarat, India

Vadodara, Gujarat, India