604+ Latest Fire Resistant Coatings Or Putties Or Sealants Tenders

Tender247 Lists Fire Resistant Coatings Or Putties Or Sealants Tenders As Soon As They Are Published, Covering Requirements From Government Offices, Psus, And Private Companies For Fire Resistant Coatings Or Putties Or Sealants. Tenders In This Category Typically Specify Quantity, Technical Or Quality Specifications, Delivery Schedule, And Applicable Quality Or Compliance Standards Relevant To The Item. Anyone Looking For The Latest Fire Resistant Coatings Or Putties Or Sealants Tender Notifications Can Rely On Tender247'S Dedicated Category Listing, Sourced Directly From Official E-Procurement Portals. Each Fire Resistant Coatings Or Putties Or Sealants Tender Listing Includes The Tender Reference Number, Issuing Organization, Estimated Value, Emd, And Bid Submission Deadline. Suppliers Of Fire Resistant Coatings Or Putties Or Sealants Can Register On Tender247 For Real-Time, Category-Based Notifications And Never Miss A Deadline.

Live Fire Resistant Coatings Or Putties Or Sealants Tenders 2026

141 |Bid Value:₹ 7.18 Cr. |EMD:₹ Refer Docs |18-09-2026 1 Day Left |T247 ID-103981637

supply of - enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , ready mixed paint, air drying, red oxide - zinc phosphate, priming as per is 12744 (q3) , thinner for synthetic paint and varnishes conforming to is 14314 (q3) - | quantity - 239136

Tiruvallur, Tamil Nadu, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
142 |Bid Value:₹ 5.52 Cr. |EMD:₹ 5.52 Lakh |18-09-2026 1 Day Left |T247 ID-103476676

demolishing r.c.c work , demolishing cement concrete , earth work , filling available excavated earth , filling in plinth with sand , plain cement concrete 1 isto 3 isto 6 , laying position cement concrete 1 isto 2 isto 4 , reinforced cement concrete work 1 isto 1.5 isto 3 , steel reinforcement , providing and fixing centering and shuttering , lintels or beams or plinth beams or chujja or griders or bressumers and cantilevers , structural steel work , brick work foundation and plinth , brick work in super structure , half brick masonry , 12 mm thick cement plaster 1 isto 6 , 15 mm thick cement plaster , 12 mm thick cement plaster 1 isto 4 , providing and fixing concertina coil , premium acrlic smooth exterior paint , chain link , supplying and laying painting with synthetic enamel paint , steel work in built up tubular , transportation of building rubbish , transportation of excavated earth , surface dressing , cleaning jungle , providing and applying priming coat with ready mixed wood - construction of boundary wall from sitadanga to jaduguda thana in ucil housing colony jaduguda | quantity - 203693

Singhbhum, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
143 |Bid Value:₹ 3.71 Cr. |EMD:₹ Refer Docs |17-09-2026 Ending Today|T247 ID-104021558

corrigendum : supply of zinc silicate shop primer and thinner - rate contract for the supply of zinc silicate primer brown, grey and matching thinner

Ernakulam, Kerala, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
144 |Bid Value:₹ 3.34 Cr. |EMD:₹ 5.65 Lakh |30-09-2026 13 Days Left|T247 ID-104401797

operation and maintenance of electrical and mechanical installations ref atc pg.no soq 1 to 6 , items under electrical and mechanical dsr 2025 as per requirement ref atc pg.no soq 1 to 6 , installation of ci housing box ref atc pg.no soq 1 to 6 , laying of hdpe pipe upto 63mm dia in ground ref atc pg.no soq 1 to 6 , drawing of agl cables of 6 or 16sqmm cable ref atc pg.no soq 1 to 6 , annual servicing of 22kv 3 nos of ht breakers vcb ref atc pg.no soq 1 to 6 , annual servicing of 13 nos of l and t acbs ref atc pg.no soq 1 to 6 , main contact assembly fixed and moving for 1600a omega model acbs ref atc pg.no soq 1 to 6 , main contact assembly fixed and moving for 1250a omega model acbs ref atc pg.no soq 1 to 6 , shunt release operating voltage of 240v for omega model acbs ref atc pg.no soq 1 to 6 , closing coil 240v for l and t make omega model acb ref atc pg.no soq 1 to 6 , electrical charging device for l and t make omega model acb ref atc pg.no soq 1 to 6 , cradle facia for 1250a l and t make omega model acb ref atc ref atc pg.no soq 1 to 6 , spring charging handle l and t make omega model acb ref atc ref atc pg.no soq 1 to 6 , front facia for 1250a l and t make omega model acb ref atc ref atc pg.no soq 1 to 6 , frame 1, 4p main mechanism for 1250a l and t make omega model acb ref atc pg.no soq 1 to 6 , base plate assembly frame 4p for 1250a l and t make omega model acb ref atc pg.no soq 1 to 6 , under voltage release 415v for l and t make omega model acb ref atc pg.no soq 1 to 6 , annual calibration of 1 no clinometer and 1 no angle setting tools ref atc pg.no soq 1 to 6 , annual calibration of8 nos over current relay and earth fault relay ref atc pg.no soq 1 to 6 , annual calibration of 3 nos feeder protection relay ref atc pg.no soq 1 to 6 , conducting photometric field test of airfield ground lighting ref atc pg.no soq 1 to 6 , servicing and repairing of 16 mtr high mast pole ref atc pg.no soq 1 to 6 , servicing and repairing of 20 mtr high mast pole ref atc pg.no soq 1 to 6 , servicing and repairing of 30 mtr high mast pole ref atc pg.no soq 1 to 6 , supply of 6 corex 2 sqmm epr insulated copper cable ref atc pg.no soq 1 to 6 , supply of 5 core x 4 sqmm epr insulated copper cable ref atc pg.no soq 1 to 6 , supply of 6mm dia ss wire rope ss 304 7 x 19 ref atc pg.no soq 1 to 6 , repairing of high mast motor gear and winch assembly ref atc pg.no soq 1 to 6 , providing decorative lighting at terminal building garden etc ref atc pg.no soq 1 to 6 , extra for additional days for providing decorative lighting ref atc pg.no soq 1 to 6 , painting of electrical ht or lt panels with synthetic enamel paint ref atc pg.no soq 1 to 6 , painting of electrical ht or lt panels with epoxy primer ref atc pg.no soq 1 to 6 , painting of existing runway edge lights turn pad taxiway light ref atc pg.no soq 1 to 6 , painting of existing elevated approach lights ref atc pg.no soq 1 to 6 , numbering of agl light fixtures ref atc pg.no soq 1 to 6 , hiring of electrical and diesel operated 2 hp pumps ref atc pg.no soq 1 to 6 , hiring of electrical and diesel operated 3 hp pumps ref atc pg.no soq 1 to 6 , hiring of electrical and diesel operated 5 hp pumps ref atc pg.no soq 1 to 6 , hiring of hydraulic telescopic boom mobile crane ref atc pg.no soq 1 to 6 , hiring of wheel mounted hydraulic backehoe loader ref atc pg.no soq 1 to 6 , hiring of unskilled labours as per requirement ref atc pg.no soq 1 to 6 - amc of airfield ground lighting | quantity - 830247

Tuticorin, Tamil Nadu, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
145 |Bid Value:₹ 2.50 Cr. |EMD:₹ 1.00 Lakh |22-10-2026 35 Days Left|T247 ID-104246589

nfn/civil/680/2026/11 dated 11/09/2026 providing and application of anticorrosive epoxy based enamel, chlorinated - nfn/civil/680/2026/11 dated 11/09/2026 providing and application of anticorrosive epoxy based enamel chlorinated rubber paint and epoxy painting to lift shaft stair flights and external surface of new prilling tower along with its steel structure

Ropar, Punjab, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
146 |Bid Value:₹ 2.50 Cr. |EMD:₹ 1.00 Lakh |22-10-2026 35 Days Left|T247 ID-104272071

providing and application of anticorrosive epoxy based enamel, chlorinated rubber paint and epoxy painting to lift shaft, stair flights and external surface of new prilling tower along with its steel structure supports at nfl nangal unit.

Ropar, Punjab, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
147 |Bid Value:₹ 2.50 Cr. |EMD:₹ 1.00 Lakh |22-10-2026 35 Days Left|T247 ID-104277708

providing & application of anticorrosive epoxy based enamel, chlorinated rubber paint and epoxy painting to lift shaft, stair flights and external surface of new prilling tower along with its steel structure supports at nfl nangal unit.

Nangal, Punjab, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
148 |Bid Value:₹ 2.30 Cr. |EMD:₹ 2.90 Lakh |21-09-2026 4 Days Left|T247 ID-104092684

synthetic enamel paints and its ancillaries

Mumbai, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
149 |Bid Value:₹ 1.85 Cr. |EMD:₹ 1.85 Lakh |24-09-2026 7 Days Left|T247 ID-104384140

resurfacing of napad canal to lalpura danpura road (vrnp) km. 0/000 to 4/700 under mmgsy( scsp) - granular sub base (gsb), water bound macadam (wbm), built-up spray grout base, bituminous macadam (bm), mix seal surfacing, trimix c.c. road, hectometer, kilometer stone, cautionary warning sign, village name / bump ahead sign, direction sign (junction board), road marking with hot applied thermoplastic paint, cat eye (stimsonite), citizen's information board, mmgsy "logo" board, mmgsy project information board, regulatory / mandatory signs, informatory signs, ordinary cement concrete m-100 mix with vertical pin headers.

Anand, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
150 |Bid Value:₹ 1.36 Cr. |EMD:₹ 2.18 Lakh |29-09-2026 12 Days Left|T247 ID-104145458

tna-klva - rendering service for maintenance work including supply of materials for colonies under sse(w)tna for 24 months: o mprehensive breakdown of the schedule:, schedule 1: part 'a' ns items, description: supply of skilled/unskilled staff/labours under sse(wks)tna total value for part a: 1,08,81,792.00, ns1 supply of skilled mason (1 nos), quantity: 24.00 month | unit rate: 29,896.00 | total amount: 7,17,504.00, ns2 supply of skilled carpenter (1 nos), quantity: 24.00 month | unit rate: 29,896.00 | total amount: 7,17,504.00, ns3 supply of skilled g/fitter (1 nos), quantity: 48.00 month | unit rate: 29,896.00 | total amount: 14,35,008.00, ns4 supply of skilled p/fitter (1 nos), quantity: 24.00 month | unit rate: 29,896.00 | total amount: 7,17,504.00, ns5 supply of skilled painter (1 nos), quantity: 24.00 month | unit rate: 29,896.00 | total amount: 7,17,504.00, ns6 supply of unskilled labour/khalashi (10 nos), quantity: 240.00 month | unit rate: 24,912.00 | total amount: 59,78,880.00, ns7 supply of unskilled safaiwala (1 nos), quantity: 24.00 month | unit rate: 24,912.00 | total amount: 5,97,888.00, schedule 2: part 'b' ns items, description: supply of material to rendering service for maintenance under sse(w)tna for 24 months total value for part b: 19,38,544.00, ns1 ordinary portland cement grade-53 grade, quantity: 12.00 mt | unit rate: 6,210.00 | total amount: 74,520.00, ns2 white cement, quantity: 6.00 mt | unit rate: 12,937.50 | total amount: 77,625.00, ns3 stone aggregate broken : 20 mm nominal size, quantity: 20.00 cum | unit rate: 805.00 | total amount: 16,100.00, ns4 coarse sand (minimum zone iii ), quantity: 80.00 cum | unit rate: 1,380.00 | total amount: 1,10,400.00, ns5 f.p.s. bricks class designation 7.5, quantity: 16,000.00 (per 1000 nos.) | unit rate: 4,025.00 | total amount: 64,400.00, ns6 hydraulic door closer isi marked (is:3564-1996), quantity: 40.00 each | unit rate: 314.64 | total amount: 12,585.60, ns7 fly proof wire mesh, quantity: 600.00 sqm | unit rate: 149.50 | total amount: 89,700.00, ns8 brass tower bolt (barrel type) 250x10 mm, quantity: 300.00 each | unit rate: 165.60 | total amount: 49,680.00, ns9 block board construction flush door with commercial ply on both faces 35 mm thick, quantity: 120.00 sqm | unit rate: 726.80 | total amount: 87,216.00, ns10 1.0 mm thick decorative laminated sheet (mat finish), quantity: 120.00 sqm | unit rate: 316.25 | total amount: 37,950.00, ns11 frosted glass sheet of nominal thickness 4 mm (weighing not less than 10 kg/sqm), quantity: 160.00 sqm | unit rate: 460.00 | total amount: 73,600.00, ns12 ply wood 5 ply with commercial ply on both faces 6 mm thick, quantity: 480.00 sqm | unit rate: 253.00 | total amount: 1,21,440.00, ns13 flat pressed 3 layer and graded particle board medium density ) grade i conforming to is-3087-18 mm thick, quantity: 400.00 sqm | unit rate: 498.46 | total amount: 1,99,384.00, ns14 veneered particle board with commercial veneering on both sides 12mm thick, quantity: 200.00 sqm | unit rate: 379.50 | total amount: 75,900.00, ns15 synthetic enamel paint in all shades, quantity: 240.00 litre | unit rate: 109.25 | total amount: 26,220.00, ns16 plastic emulsion paint, quantity: 240.00 litre | unit rate: 204.70 | total amount: 49,128.00, ns17 oil bound washable distemper / acrylic distemper, quantity: 240.00 kg | unit rate: 86.25 | total amount: 20,700.00, ns18 water proofing cement paint / snowcem, quantity: 400.00 kg | unit rate: 31.05 | total amount: 12,420.00, ns19 plaster of paris, quantity: 400.00 kg | unit rate: 4.89 | total amount: 1,956.00, ns20 rectangular shape 600x450 mm precast r.c.c. manhole cover with frame-ld-2.5, quantity: 100.00 each | unit rate: 1,039.97 | total amount: 1,03,997.00, ns21 ceramic floor tiles group b-ii clause 5.1 of size 400x400 mm & above, quantity: 160.00 sqm | unit rate: 419.75 | total amount: 67,160.00, ns22 polyethylene vinyl chloride water storage tank with cover and suitable locking arrangement, quantity: 80,000.00 litre | unit rate: 4.31 | total amount: 3,44,800.00, ns23 white plastic w.c seat (solid) with lid c.p. brass hinges and rubber buffers, quantity: 20.00 each | unit rate: 455.40 | total amount: 9,108.00, ns24 mirror of superior make glass 60x45 cm (with 5-6 mm thick base complete), quantity: 120.00 each | unit rate: 287.50 | total amount: 34,500.00, ns25 semi rigid pvc waste pipe for sink and wash basin 32 mm dia (min 700 mm length), quantity: 400.00 each | unit rate: 26.50 | total amount: 10,600.00, ns26 coloured high density polyethylene polypropylene 10 lit. (full flush) capacity controlled, quantity: 160.00 each | unit rate: 1,046.59 | total amount: 1,67,454.40, schedule 3: part 'c' ns items, description: supply of material to rendering service for maintenance under sse(w)tna for 24 months, total value for part c: 7,72,396.60, ns1 supply of 15 mm dia c.p. brass angle cock with flange (seiko, goldline or similar), quantity: 240.00 each | unit rate: 462.04 | total amount: 1,10,889.60, ns2 supply of nylon rassi 4 mm thick of good quality, quantity: 300.00 kg | unit rate: 194.09 | total amount: 58,227.00, ns3 supply of cpvc pipes 20 mm dia, quantity: 400.00 metre | unit rate: 110.00 | total amount: 44,000.00, ns4 supply of cpvc pipes 25 mm dia, quantity: 300.00 metre | unit rate: 170.00 | total amount: 51,000.00, ns5 supply of cpvc fittings: elbow 90 degree 20mm efm thrd tee (brass fbt), quantity: 100.00 each | unit rate: 120.00 | total amount: 12,000.00, ns6 supply of cpvc fittings: male thrd adapter (brass mabt) 20mm, quantity: 100.00 each | unit rate: 166.00 | total amount: 16,600.00, ns7 supply of swr pvc pipe type a: single socket 10' (3mtr) 90mm, quantity: 280.00 metre | unit rate: 212.00 | total amount: 59,360.00, ns8 supply of swr pvc pipe type a: single socket 10' (3mtr) 110mm, quantity: 300.00 metre | unit rate: 230.00 | total amount: 69,000.00, ns9 supply of swr pvc pipe type a: double socket 10' (3mtr) 90mm, quantity: 300.00 metre | unit rate: 243.00 | total amount: 72,900.00, ns10 supply of swr pvc pipe type a: double socket 10' (3mtr) 110mm, quantity: 360.00 metre | unit rate: 265.00 | total amount: 95,400.00, ns11 supply of swr pvc pipes fitting type a: plain "y" 90 mm, quantity: 40.00 each | unit rate: 179.00 | total amount: 7,160.00, ns12 supply of swr pvc pipes fitting type a: plain "y" 110 mm, quantity: 60.00 each | unit rate: 238.00 | total amount: 14,280.00, ns13 supply of swr pvc pipes fitting type a: double plain "y" 90 mm, quantity: 80.00 each | unit rate: 288.00 | total amount: 23,040.00, ns14 supply of swr pvc pipes fitting type a: double plain "y" 110 mm, quantity: 60.00 each | unit rate: 313.00 | total amount: 18,780.00, ns15 supply of pvc pipes high pressure (40 mm), quantity: 320.00 metre | unit rate: 134.00 | total amount: 42,880.00, ns16 supply of heavy duty 22" long drawer channels, quantity: 400.00 each | unit rate: 192.20 | total amount: 76,880.00,

Mumbai, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
151 |Bid Value:₹ 1.24 Cr. |EMD:₹ 2.48 Lakh |06-10-2026 19 Days Left|T247 ID-104366369

restoration of unit-ist including procurement of material/consumables required - "installation of bulk head on penstock line opening or miv locking for complete arresting water leakages. bulk head to be provided by j&k, pdcl.", "opening of all oil, water and air and grease, pipe lines of turbine and generator.", "installation of erection devices for dismantling / removing of draft tube cone (upper and lower), & runner assembly.", "dismantling of adjusting rings of draft tube, cone.", "dismantling of draft tube upper and the lower, cone.", "installation of bulk head on draft tube opening., bulk head, to be provided by j&k pdcl.", "opening of the supporting plates of regulating rings after disengaging from the connecting rods, of guide vane servomotors.", "dismantling of the existing shaft sleeve, assembly.", "dismantling of guide vane levers, guide vane, links etc.", "dismantling of all the turbine guide bearing, pads and storing them safely.", "decoupling of turbine shaft and the generator, shaft assembly.", "dismantling of all the guide vanes and guide, vane servomotors, etc.", dismantling of all the guide vane bushes from the top cover bush housings. however before their dismantling, diameters of all the pivot bushes shall be measured and recorded., dismantling of the turbine top cover assembly including the lower fixed labyrinth ring., dismantling of the turbine shaft assembly., "dismantling of the existing damaged shaft sleeve, assembly.", dismantling of all the guide vane bushes from the pivot ring assembly. however before their dismantling, diameters of all the pivot bushes shall be measured and recorded., "inspection of all the dismantled studs, dowels, bolts/ nuts, pins to identify their replacement by, new ones.", dismantling of pivot ring assembly., post dismantling activities, "balancing of rotor assembly conducting the impedance measurement of all the rotor pole coils followed by their polarity testing., completing the jointing of all the assembled/ tested rotor poles involving soldering, breezing and proper insulation. measurement of the insulation resistance of the rotor pole winding to check its final healthiness. balancing of rotor assembly including providing of weight", "balancing of rotor assembly including providing, of weight", "thorough cleaning of the complete generator stator core all along its periphery both inside as well as from its outside surface using a suitable, cleaning agent viz mto.", "thorough cleaning of all oil coolers along with, water tubes and pressure testing of the same with assembly.", "thorough cleaning of all turbine guide bearing, oil coolers and pressure testing of the same and assembly.", "thorough cleaning of the complete generator stator winding overhang portions all along its periphery on both its connection-end side as well as from its non-connection end side using a, suitable cleaning agent viz mto.", "blue-matching of rebabitated pads for checking quality of, rebabitating with a surface plate.", "blue-matching of thrust collat bottom surface with the top insulation surface for thrust runner, disc at service bay.", "blue-matching of rebabitated pads with the, coresponding journal surface on the thrust collar assembly.", blue-matching of rebabitated pads with the coresponding journal surface on the lower bearing journal on the generator shaft assembly., polishing of all the turbine guide bearing pads and blue-matching them with the coresponding journal surface on the turbine bearing journal on the turbine shaft assembly., "conducting the dry-out of the generator stator, winding assembly.", measurement of the insulation resistance of the rotor pole winding to check its final healthiness, "conducting the dry-out of the generator rotor, assembly.", boxup activities, assemblies of the top cover assembly in position with replacement of all its old fasteners by new ones which are to be procured., "replacement of 8mm rubber cord by a new, one.", "trial assembly of runner with pivot ring and, measurement of bottom labyrinths clearances.", trial assembly of runner with turbine top cover and measurement of top labyrinth clearances., re-assembly of pivot ring assembly in position., "re-assembly of all guide vanes in the pivot ring, assembly.", "lowering of turbine shaft assembly in the turbine, pit using the erection device.", "re-assembly of all the guide vane bush housings in the top cover and replacement of its damaged fasteners by new ones which are to be, procured", "assembly of regulating ring along with, connecting rods of the guide vane servomotors in the unit.", "lowering of lower bracket assembly along with brake jack assembly in position with all its, fasteners duly tightened.", "lowering of generator rotor assembly in the generator pit, supporting on the jacking pads.", "lowering of upper bracket assembly in position with all its, fasteners duly tightened.", "re-assembly of thrust collar assembly on the generator shaft by shrunk fitting method., checking the vertical movement of thrust collar, assembly.", "reassembly of thrust runner disc assembly, thrust pads, h.s., lubrication system, etc.", "checking of rotational level of generator shaft and correcting, the same", coupling of generator and turbine shaft flanges., "re-assembly of the francis runner assembly and its coupling with turbine shaft using new, coupling bolts & nuts.", "assembly of all associated turbine components viz guide vane servomotors, guide vane lever, & link mechanism.", "carrying out the combined rotational checks of the turbine & generator shafts and correcting the alignment, leveling & equal ioad sharing of, the thrust pads.", "centering of the shaft and setting of bearing clearances in, ugb, lgb & tgb in a concentric manner.", "checking and connecting of all oil pipe lines &, charging of governor.", "bedding & setting of all guide vanes with respect to steel liner, of top cover and lower ring to achieve proper, clearances.", "boxing up all bearings including their oil & water, pipe lines.", "complete assembly of draft tube upper cone, including full tightening of all bolts.", "complete assembly of lower cone with full, tightening of bolts.", "complete assembly of adjusting ring with full, tightening of all the bolts.", "complete assembly of shaft sealing system, including assembly of water pipelines", "complete assembly of oil bath of thrust bearing, with full tightening of bolts.", "assembly of grease pipeline of upper bushes and lower bushes and assembly of water pipe, line of lower bush", "measurement of insulation resistance value of, stator and rotor winding.", "spinning of the machine, dry out and then, synchronizing/ loading of the unit.", "carrying out the dry-out of the generator with windage loss method till the satisfactory levels of ir & the pi values is, achieved.", voltage build-up and subsequent synchronization of the unit followed by loading in steps and checking the unit vibrations at every step till the unit reached the rated load., carrying out the measurement of unit vibrations & dynamic balancing of the unit as required., labyrinth (stationary upper lower), shaft seal (flapper set), "all general purpose consumables, d&h make mo-309 5s welding electrodes, 0-rings, general purpose fasteners, stainless steel shims, insulation paints, etc. required during the, restoration work." for its restoration at ushp-ii, kangan.

Srinagar, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
152 |Bid Value:₹ 1.15 Cr. |EMD:₹ 2.30 Lakh |17-09-2026 Ending Today|T247 ID-103938673

supply of - white color , yellow color , black color , oxford blue color , off-white color , green color , po redcolor , orange color , silver color , primer , red onxide , blackboard paint , turpentine , one inch brush , two inch brush , three inch brush , four inch brush , brush for lettering , luster roller four inch , luster roller six inches , luster roller nine inches , oil paint roller , cement paint terracotta , cement paint white , apex white color , apex terracotta color , white acrylic color , acrylic color black , acrylic color crimson red , green acrylic color , acrylic color orange , acrylic color golden yellow , acrylic color light green , acrylic color ultramarine blue , acrylic color dark brown , acrylic color lemon yellow , acrylic color white emulsion , ms 250 petrol chainsaw , mse two fifty petrol chainsaw with 18 inch guide bar and saw chain , ht seventy five tree pruner telescopic chainsaw , nc thinner , asian touch wood , hedge shears , secateurs , lawn mower blade , snoring , spade , durability , durable handles , shovel handles , hose pipe one inch , hose pipe half inch , weed , sickles , locks , axe , watering can , metal pan or construction pan , iron cupboard , twine , datre , plastic bucket , handgloves , savlon , pesticide spraying pump , tap half inch , one inch tap , one inch bangdi pipe , two inch bangdi pipe , iron flat bar half inch , iron flat bar three fourth inch , one inch iron flat bar , floor cleaner aromatic phenol , bleaching powder , scented naphthalene ball , polythene bags for nursery different sizes , wire for lawn mower or cutting machine , plastic rolls and bags , plastic rolls and bags 4 inch by 5 , plastic rolls and bags 5 inch by 6 , plastic rolls and bags 8 inch by 10 , plastic rolls and bags 10 inch by 12 , plastic rolls and bags 12 inch by 14 , plastic rolls and bags 15 inch by 16 , plastic kundi eight inch , plastic kundi ten inch , plastic kundi twelve inch , plastic kundi fourteen inch , garden shed net , two inch nails , three inch nails , one point five inch nails , number 19 nails , number 17 nails , kadi koinde ten inches , six inch tarpaulin strip , fevicol , star screw selp tapping screw one inch , star screw selp tapping screw two inch , wood grinding wheel four inch , wood sander wheel four inch , ply cutting blade four inch , ply cutting blade five inch , self head screw one inch , hexagonal screw two inch , hexagonal beat six mm , hexagonal beat eight mm , eyebrow tape three fourth inch and one inch , batten strip , spanner set , wood cutting machine ten inch wheel , toolkit , allen key set , two core copper wire , plywood eighteen mm , plywood six mm , plywood twelve mm , mdf plywood four mm , fiber resin , csm mut , hardener , cobalt liquids - items as per list attached for garden department | quantity - 20341

Pune, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
153 |Bid Value:₹ 1.00 Cr. |EMD:₹ Refer Docs |25-09-2026 8 Days Left|T247 ID-104203427

supply of - stappler pin 10 no , stamp pad blue big size , stamp,pad blue small size , stamp pad ink blue , ration,vitran panjika 44 no , register 504 page , jindal,stock book 78 number 700 page , gang book 100,page , pi register , hawalat ticket , kaidiyana,register 400 page , use and throw pen blue black,red , reynolds pen blue and red , a4 size paper ,,carbon paper , register 192 page , envelop 250 pcs,box 4x9 inch , envelop 100 pcs box 16x12 inch ,,cello tape brown tape 2 inch , cello tape 1 inch ,,gum bottle , history ticket ct , cash payment book,16 number 100 page , cash book 200 page , gate book,400 page , mulakat ticket , opd register 400 page ,,hawalat register convict in out 400 page , pencil ,,fevigum 200 ml pack , indent book , ff2 file cover ,,file cover , gi pipe point 5 inch , gi pipe point 75 inch ,,gi pipe 1 inch , gi gate valve ponit 5 inch , gi gate,valve point 75 inch , gi gate valve 1 inch , pvc pipe,point 5 inch , pvc pipe point 75 inch , pvc pipe 1 inch ,,pvc pipe 4 inch , pvc toti , pvc angle cock , pvc,washbasin toti , pvc connection pipe , wastage pipe ,,coupling jaali , steel jaali , phenyl , harpic , toilet,brush , flower broom , detergent soap 250 gram ,,bath soap 100 gram , tooth paste 100 gram pack ,,shaving blade 5 pcs packet , ghadi cell , remote,cell , coconut broom , acid toilet cleaner , tooth,brush rs 20 per pcs , vim bar rs 10 per pcs ,,bleaching powder , detergent powder 100 gram,pack , wiper full size , sutli , plastic rope 8mm ,,plastic rope 10mm , plastic rope 12mm , mosquito,kill pesticide , salt saabut , kala namak saabut ,,chakki patthar 24 inch , aata chakki ka patta , biroja,, cahakki lapeta , grease , lizol 1 litre pack , colin 1,litre pack , gum shoes per pair , plywood isi mark 6,mm , plywood isi mark 10 mm , plywood isi mark 12,mm , sunmica sheet various colors , iron keel,various sizes , kabza 4 inch , fire wood , markin,cloth , batten patti 1 inch , batten patti 2 inch ,,batten patti 3 inch , pvc pipe clip 100 pcs packet 1,inch , gi pipe clip 100 pcs packet 1 inch , pvc t 100 pcs,packet 1 inch , single power compine 16 amp , double,isolator 40 amp , 2 core isolator 63 amp , 4 core,isolator 100 amp , mcb 10 amp , mcb 16 amp , mcb 20,amp , mcb 32 amp , 2 core mcb 63 amp , 4 core mcb,100 amp , copper wire 1 mm , copper wire 1.5 mm ,,copper wire 2 mm , copper wire 2.5 mm , copper wire,4 mm , 2 core pvc aluminium wire 6 mm , 2 core pvc,aluminium wire 10 mm , 4 core pvc non armoured,aluminium wire 10 mm , 4 core non armoured,aluminium wire 20 mm , switch 6 amp , switch 16 amp,, socket 6 amp , socket 16 amp , holder simple , led,tube light 27 watt , street light 65 watt , street,light 100 watt , street light 200 watt , flood led,light 200 watt , electric insulation tape , water,proof insulation tape , condenser 3point25 ,,condenser 2point5 , fan bearing 6201 no , fan,bearing 6202 no , fan binding wire 35 no , fan,binding wire 36 no , led bulb 9 watt , led bulb 50,watt , ceiling fan per nos , cut out 100 amp ,,starter 3 face l and t , brick , sand , gravel ,,cement 50 kg bag , angle 35mm x 35mm , angle 40mm,x 40mm , magra , colour profile sheet , hp screw 1,inch 250pcs box , hp screw 1point5 inch 250pcs box ,,hp screw 2 inch 250pcs box , hp screw 2point5 inch,250pcs box , hp screw 3 inch 250pcs box , welding,rod 8 number , welding rod 10 number , cutting,wheel 4 inch , cutting wheel 5 inch , cutting wheel,14 inch , grinding wheel 4 inch , grinding wheel 5,inch , paint enamal different colours , paint apex,various colours , fevicol sh sh , fevicol ddl ddl ,,semosem teracoat 25 kg bag , birla wall putti 20 kg,bag , pop 25 kg bag , stanner 200ml , paint brush 0,number , paint brush 1 inch , paint brush 2 inch ,,paint brush 3 inch , paint brush 4 inch , rekmaar,wooden 32 number , rekmaar wooden 80 number ,,thinner per litre , tarpin oil per litre , wood primer,per litre , primer red oxide , iron jaali macchar ,,sariya 1 soot , sariya 2 soot , sariya 3 soot , sariya,4 soot , iron wire , iron wire brush , chuna dust ,,white cement , isolation sheet , polycarbonate,sheet , fibre sheet , tile cutting wheel,office stationery/constraction and miscellaneous| quantity - 111439

Udham Singh Nagar, Uttarakhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
154 |Bid Value:₹ 96.60 Lakh |EMD:₹ 1.93 Lakh |30-09-2026 13 Days Left|T247 ID-104207820

invitation of quotation for supply of constructional stores - retro-reflective thermoplastic paint (high quality)., glass beads

Multi Location, Multi State, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
155 |Bid Value:₹ 80.90 Lakh |EMD:₹ 80.90 K |29-09-2026 12 Days Left|T247 ID-104329779

annual rate contract for providing and applying hot thermoplastic road marking paint (as per morth-2013) with glass beads on various roads of t.p. 07, 08, 19, 33, 34, 35, 39, 40, 64 in sub zone-a area south east zone (limbayat) area surat (2nd attempt).

Surat, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
156 |Bid Value:₹ 54.49 Lakh |EMD:₹ 1.50 Lakh |29-09-2026 12 Days Left|T247 ID-104124449

supply and application of coating material on different underwater parts - cleaner, titanium putty, wear guard high temp, brushable ceramic (red), application cost for coating of material on different underwater parts in unit no-1 and 2 of chilla power house.

Haridwar, Uttarakhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
157 |Bid Value:₹ 50.00 Lakh |EMD:₹ Refer Docs |15-10-2026 28 Days Left|T247 ID-104290917

supply of construction materials (such as bricks, cement, gravel, sand, interlocking, grit, gravel, rebar, paint, iron, tools) at gram panchayat birmana

Sri Ganganagar, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
158 |Bid Value:₹ 50.00 Lakh |EMD:₹ Refer Docs |22-09-2026 5 Days Left|T247 ID-104402789

supply of construction material -brick, cement, gravel, sand, interlocking, print, gravel, rebar, paint, iron, tools at gram panchayat 4ksr shyopura

Sri Ganganagar, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
159 |Bid Value:₹ 49.85 Lakh |EMD:₹ 1.00 Lakh |03-10-2026 16 Days Left|T247 ID-104277968

procurement and installation of different types of pumps - submersible dewatering pump of 35hp as per technical specifications, dol control panel for 35 hp pump e as per technical specifications, ms erw pipe "c" class pipe as per technical specifications, submersible dewatering pump of 10hp as per technical specifications, dol control panel for 10 hp pump as per technical specifications, submersible dewatering pump of 05 hp as per technical specifications, dol control panel for 5 hp pump as per technical specifications, centrifugal monoblock pump 2hp as per technical specifications, dol control panel for 2 hp pump as per technical specifications, flexible pipe 100 mm with 4 clamps 4" as per technical specifications, flexible pipe 50 mm with 4 clamps 2" as per technical specifications, "pvc insulated copper cable of size 4 core *10 sq mm as per technical, specifications", cable for automation 2 core *1.5 sq mm as per technical specifications, rotary gear oil pump as per technical specifications, control panel for rotary gear pump as per technical specifications, work part, construction of civil structure for installation of 35 hp pumps including material, cement, dust, gravels, bricks and labor, skilled mason, and machinery as per site requirement. as per technical specifications, complete installation, testing and commissioning of 35 hp pump supplied at sr. no. 1, suitable with all required tools and tackle with help of crane. manual chain pulley system, welder, balder, supervisor, skilled electrician and other tools and tackles as per technical specifications, complete installation, testing and commissioning of 35 hp pump available at site, suitable with all required tools and tackle with help of crane. manual chain pulley system, welder, balder, supervisor, skilled electrician and other tools and tacklesas per technical specifications, complete installation, testing and commissioning and 150 mm pipe at s. no. 3, cable with required bend, flange, nut bolt, rubber gasket, fabrication, machining, with help of crane. manual chain pulley system, welder, balder, supervisor, skilled electrician and other tools and tackles as per technical specifications, automation of 35 hp submersible pumps based on level with float switch and water level controller provision including wiring and instrumentation complete in all respect as per technical specifications, applying primer then two layers of epoxy painting with primer with code on all fabricated work and pipe as per technical specifications, handling, loading, unloading, transportation charges etc. for all items up to dhakrani power station with manpower, crane etc as per requirement at dhakrani power house

Dehradun, Uttarakhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
160 |Bid Value:₹ 49.40 Lakh |EMD:₹ 4.47 Lakh |Refer Docs|T247 ID-104396450

thermoplastic and signage work on the marhamatabad airstrip and access road in kanpur dehat district.

Kanpur, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
Prev 7 8 9 Next
whatsapp