95 Latest Gas Turbine Tenders

Gas Turbine Tenders On Tender247 Bring Together Government Departments, Psus, And Private-Sector Buyers Across India Who Are Sourcing Gas Turbine Through Competitive Bidding. Tenders Typically Specify Technical Capacity, Make/Model Preference, Quantity, Installation And Commissioning Scope, And After-Sales Amc Requirements. Whenever A New Gas Turbine Tender Or Corrigendum Is Published, Tender247 Indexes It Promptly So Suppliers Never Miss A Bidding Opportunity. Listings For Gas Turbine Are Updated With Tender Status (Live, Closed, Or Awarded) And A Direct Link To The Full Tender Document. Track Gas Turbine Tenders On Tender247 And Set Up Custom Alerts By Buyer Or Location To Stay Ahead Of The Competition.

Live Gas Turbine Tenders 2026

21 |Bid Value:₹ 383.80 Cr. |EMD:₹ Refer Docs |30-09-2026 13 Days Left|T247 ID-104165137

engineering, procurement, construction (epc) with commissioning including testing, trial run and comprehensive o&m&r of common steam plant - turbine power generation & steam distribution network for the capacity of 210 tph and 28 mw at bulk drug park industrial estate, jambusar, bharuch, gujarat ( re- invited).

Bharuch, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
22 |Bid Value:₹ 9.44 Cr. |EMD:₹ 10.00 Lakh |24-09-2026 7 Days Left|T247 ID-104328074

custom bid for services - 200154092, biennial maintenance contract(bmc) for turbine, auxiliaries and acc for nkstpp

Chatra, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
23 |Bid Value:₹ 7.96 Cr. |EMD:₹ 15.92 Lakh |22-09-2026 5 Days Left|T247 ID-103703512

corrigendum : repair and overhauling service - overhauling of 1000mwe steam turbine, and generator of kknpp#1&2; as per scope of work; no; buyer premises

Tirunelvelli, Tamil Nadu, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
24 |Bid Value:₹ 3.01 Cr. |EMD:₹ Refer Docs |22-09-2026 5 Days Left|T247 ID-104270743

procurement of m/s hangzhou steam turbine co. ltd. (htc) make blades for stationary portion for tdbfp 4-b drive turbine (model no. nks-63/71) drive set wt-5596 of unit no. 4 at 2x660 mw ph-ii, sstpp, dongalia.

Khandwa, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
25 |Bid Value:₹ 2.01 Cr. |EMD:₹ 2.00 Lakh |24-09-2026 7 Days Left|T247 ID-104305776

custom bid for services - job contract for turbine overhauling of unit 5 -500 mw- of ntpc farakka -in- situ mpi and paut of lp free standing blades-all bearing inspection and tg valves as per revised sow

Murshidabad, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
26 |Bid Value:₹ 1.67 Cr. |EMD:₹ 2.00 Lakh |21-09-2026 4 Days Left|T247 ID-102988223

corrigendum : procurement of spares for hp turbine for coh of 250mw kwu turbine set of unit no. 11, stps, mppgcl, sarni.

Betul, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
27 |Bid Value:₹ 1.24 Cr. |EMD:₹ 2.48 Lakh |06-10-2026 19 Days Left|T247 ID-104366369

restoration of unit-ist including procurement of material/consumables required - "installation of bulk head on penstock line opening or miv locking for complete arresting water leakages. bulk head to be provided by j&k, pdcl.", "opening of all oil, water and air and grease, pipe lines of turbine and generator.", "installation of erection devices for dismantling / removing of draft tube cone (upper and lower), & runner assembly.", "dismantling of adjusting rings of draft tube, cone.", "dismantling of draft tube upper and the lower, cone.", "installation of bulk head on draft tube opening., bulk head, to be provided by j&k pdcl.", "opening of the supporting plates of regulating rings after disengaging from the connecting rods, of guide vane servomotors.", "dismantling of the existing shaft sleeve, assembly.", "dismantling of guide vane levers, guide vane, links etc.", "dismantling of all the turbine guide bearing, pads and storing them safely.", "decoupling of turbine shaft and the generator, shaft assembly.", "dismantling of all the guide vanes and guide, vane servomotors, etc.", dismantling of all the guide vane bushes from the top cover bush housings. however before their dismantling, diameters of all the pivot bushes shall be measured and recorded., dismantling of the turbine top cover assembly including the lower fixed labyrinth ring., dismantling of the turbine shaft assembly., "dismantling of the existing damaged shaft sleeve, assembly.", dismantling of all the guide vane bushes from the pivot ring assembly. however before their dismantling, diameters of all the pivot bushes shall be measured and recorded., "inspection of all the dismantled studs, dowels, bolts/ nuts, pins to identify their replacement by, new ones.", dismantling of pivot ring assembly., post dismantling activities, "balancing of rotor assembly conducting the impedance measurement of all the rotor pole coils followed by their polarity testing., completing the jointing of all the assembled/ tested rotor poles involving soldering, breezing and proper insulation. measurement of the insulation resistance of the rotor pole winding to check its final healthiness. balancing of rotor assembly including providing of weight", "balancing of rotor assembly including providing, of weight", "thorough cleaning of the complete generator stator core all along its periphery both inside as well as from its outside surface using a suitable, cleaning agent viz mto.", "thorough cleaning of all oil coolers along with, water tubes and pressure testing of the same with assembly.", "thorough cleaning of all turbine guide bearing, oil coolers and pressure testing of the same and assembly.", "thorough cleaning of the complete generator stator winding overhang portions all along its periphery on both its connection-end side as well as from its non-connection end side using a, suitable cleaning agent viz mto.", "blue-matching of rebabitated pads for checking quality of, rebabitating with a surface plate.", "blue-matching of thrust collat bottom surface with the top insulation surface for thrust runner, disc at service bay.", "blue-matching of rebabitated pads with the, coresponding journal surface on the thrust collar assembly.", blue-matching of rebabitated pads with the coresponding journal surface on the lower bearing journal on the generator shaft assembly., polishing of all the turbine guide bearing pads and blue-matching them with the coresponding journal surface on the turbine bearing journal on the turbine shaft assembly., "conducting the dry-out of the generator stator, winding assembly.", measurement of the insulation resistance of the rotor pole winding to check its final healthiness, "conducting the dry-out of the generator rotor, assembly.", boxup activities, assemblies of the top cover assembly in position with replacement of all its old fasteners by new ones which are to be procured., "replacement of 8mm rubber cord by a new, one.", "trial assembly of runner with pivot ring and, measurement of bottom labyrinths clearances.", trial assembly of runner with turbine top cover and measurement of top labyrinth clearances., re-assembly of pivot ring assembly in position., "re-assembly of all guide vanes in the pivot ring, assembly.", "lowering of turbine shaft assembly in the turbine, pit using the erection device.", "re-assembly of all the guide vane bush housings in the top cover and replacement of its damaged fasteners by new ones which are to be, procured", "assembly of regulating ring along with, connecting rods of the guide vane servomotors in the unit.", "lowering of lower bracket assembly along with brake jack assembly in position with all its, fasteners duly tightened.", "lowering of generator rotor assembly in the generator pit, supporting on the jacking pads.", "lowering of upper bracket assembly in position with all its, fasteners duly tightened.", "re-assembly of thrust collar assembly on the generator shaft by shrunk fitting method., checking the vertical movement of thrust collar, assembly.", "reassembly of thrust runner disc assembly, thrust pads, h.s., lubrication system, etc.", "checking of rotational level of generator shaft and correcting, the same", coupling of generator and turbine shaft flanges., "re-assembly of the francis runner assembly and its coupling with turbine shaft using new, coupling bolts & nuts.", "assembly of all associated turbine components viz guide vane servomotors, guide vane lever, & link mechanism.", "carrying out the combined rotational checks of the turbine & generator shafts and correcting the alignment, leveling & equal ioad sharing of, the thrust pads.", "centering of the shaft and setting of bearing clearances in, ugb, lgb & tgb in a concentric manner.", "checking and connecting of all oil pipe lines &, charging of governor.", "bedding & setting of all guide vanes with respect to steel liner, of top cover and lower ring to achieve proper, clearances.", "boxing up all bearings including their oil & water, pipe lines.", "complete assembly of draft tube upper cone, including full tightening of all bolts.", "complete assembly of lower cone with full, tightening of bolts.", "complete assembly of adjusting ring with full, tightening of all the bolts.", "complete assembly of shaft sealing system, including assembly of water pipelines", "complete assembly of oil bath of thrust bearing, with full tightening of bolts.", "assembly of grease pipeline of upper bushes and lower bushes and assembly of water pipe, line of lower bush", "measurement of insulation resistance value of, stator and rotor winding.", "spinning of the machine, dry out and then, synchronizing/ loading of the unit.", "carrying out the dry-out of the generator with windage loss method till the satisfactory levels of ir & the pi values is, achieved.", voltage build-up and subsequent synchronization of the unit followed by loading in steps and checking the unit vibrations at every step till the unit reached the rated load., carrying out the measurement of unit vibrations & dynamic balancing of the unit as required., labyrinth (stationary upper lower), shaft seal (flapper set), "all general purpose consumables, d&h make mo-309 5s welding electrodes, 0-rings, general purpose fasteners, stainless steel shims, insulation paints, etc. required during the, restoration work." for its restoration at ushp-ii, kangan.

Srinagar, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
28 |Bid Value:₹ 1.00 Cr. |EMD:₹ 2.01 Lakh |18-09-2026 1 Day Left |T247 ID-103336157

corrigendum : annual work contract for routine and breakdown mtc. of turbine, heat exchangers, tdbfp turbine and their auxiliaries, mtc. and up-keeping of various pumps in turbine area, opr. and mtc. of 2 nos. eot crane (105/25 mt) in tg hall of katpp, jhalawar

Jhalawar, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
29 |Bid Value:₹ 77.78 Lakh |EMD:₹ 1.50 Lakh |18-09-2026 1 Day Left |T247 ID-101832291

corrigendum : repair, maintenance, and installation of plant systemsequipments (version 2) - industry unit; annual overhauling of turbine and generator of unit no 2 of 3x210 mw atps anpara; service provider

Sonebhadra, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
30 |Bid Value:₹ 61.32 Lakh |EMD:₹ 64.82 K |Refer Docs|T247 ID-104063215

1) biennial contract for maintenance and servicing of flame scanners, soot blowers and igniters for unit no. 1 to 4 khaperkheda tps., 2) work contract for carrying out internals / externals works esp during ssd of unit 3 for ahp-i., 3) procurement of impact, carrying, return, flat idlers / rollers for 1200 mm and 1800 mm wide belt conveyors for chp-ii, t.p.s., khaperkheda., 4) restoration work of hoist with electrical and mechanical repairs including replacement of new wire rope and providing working platform at coal handling plant-ii, khaperkheda tps., 5) work contract for attending boiler tube leakages (btl) by h.p. tube welding work for unit no. 1 to 4., 6) procurement of endless belt for 36" gravimetric coal feeder in unit-5, 500 mw, tps, khaperkheda., 7) reconditioning and re-babbiting of tg bearing no. 01 and 07 of khaperkheda tps unit 03 & 04., 8) comprehensive maintenance contract for servicing and repairing electrical hoist & eot cranes installed at various locations in chp-i, khaparkheda tps., 9) procurement of grating for cooling tower of unit 1 at khaperkheda tps210mw., 10) work contract for lifting, shifting and overhauling of 575 / 800 kw crusher motor on as & when required basis in chp-i (4 x 210 mw), tps khaperkheda, 11) design, supply, installation and commissioning of rectiformers for esp unit#1 & 2 at 210mw khaperkheda tps., 12) pprocurement of a4 size xerox papers at khaperkheda tps., 13) refurbishment, revamping, retrofitting and modification of "waregaon pump house lt switchgear mcc panel by supply, installation and commissioning of switchgear panel along with accessories at 210mw khaperkheda tps., 14) procurement of turbine bearing jacking oil hoses for unit 3 coh khaperkheda tps.

Khaparkheda, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
31 |Bid Value:₹ 57.76 Lakh |EMD:₹ 57.76 K |21-09-2026 4 Days Left|T247 ID-103568970

corrigendum : hpsebl/pec/bhaba/voith runner - major repair of runner and hv hvof coating and to and fro transportation and insurance

Kinnaur, Himachal Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
32 |Bid Value:₹ 57.38 Lakh |EMD:₹ 1.15 Lakh |23-09-2026 6 Days Left|T247 ID-103133644

corrigendum : work contract for annual routine maintenance work of turbine house auxiliaries, air compressor room auxiliaries etc. for ph i at sgtps, mppgcl birsinghpur

Umaria, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
33 |Bid Value:₹ 24.87 Lakh |EMD:₹ Refer Docs |22-09-2026 5 Days Left|T247 ID-103914805

miscellaneous repair & maintenance works of auxiliary system for 03 nos machines having each capacity of 60 mw turbine at chibro power station

Dehradun, Uttarakhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
34 |Bid Value:₹ 24.87 Lakh |EMD:₹ Refer Docs |Refer Docs|T247 ID-103980651

1. miscellaneous repair and maintenance work on the auxiliary systems for the three 60 mw turbine units at chhibro. 2. repair work on the runner of the 60 mw francis turbine at chhibro power house. 3. annual maintenance work for units 02 and 04 of chhibro power house. (hindi document)

Dehradun, Uttarakhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
35 |Bid Value:₹ 24.78 Lakh |EMD:₹ Refer Docs |22-09-2026 5 Days Left|T247 ID-103914797

repairing of runner of francis turbine of 60 mw capacity of chibro power station

Dehradun, Uttarakhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
36 |Bid Value:₹ 24.52 Lakh |EMD:₹ Refer Docs |21-09-2026 4 Days Left|T247 ID-103881744

annual maintenance work related to turbine & associated parts of unit no. 2&3 of khodri power station

Dehradun, Uttarakhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
37 |Bid Value:₹ 20.69 Lakh |EMD:₹ Refer Docs |17-09-2026 Ending Today|T247 ID-103674024

procurement of ss liner plates for 76 mw turbine at dharasu power house

Uttarkashi, Uttarakhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
38 |Bid Value:₹ 19.29 Lakh |EMD:₹ 38.58 K |17-09-2026 Ending Today|T247 ID-103442867

corrigendum : annual contract for routine / preventive / breakdown and annual maintenance works of turbines and associated equipments/auxiliaries and gantry/eot cranes of 3x33 mw jshps, jawahar sagar, distt. bundi

Bundi, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
39 |Bid Value:₹ 12.69 Lakh |EMD:₹ 25.37 K |17-09-2026 Ending Today|T247 ID-103609166

corrigendum : custom bid for services - in situ drilling tapping and plugging work on embedded draft tube of 250 mw francis turbine at njhps sjvn ltd jhakri

Shimla, Himachal Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
40 |Bid Value:₹ 10.98 Lakh |EMD:₹ 10.00 K |21-09-2026 4 Days Left|T247 ID-104159983

supply of - oh of main steam line valve v2 6 , oh of steam by pass valve v2 27,15, and v2 7 , oh of es 3,4,5,6 and 7 , oh of v2 -82-84 and v2-81-a to 81c , oh of hd-21, hd-29, hd-30 and hd-31 , oh of nrv of h.p. heater and feed pump , oh of group protection valve of hph , oh of dw-4, 37,38,39,40,41 and ca 5 , oh of cst makeup valve v6 60 , oh of as-48 valve , oh of nrv of extraction line es-8 , oh of suction valve of bfp , oh condensate wtr throw off valve to condenser , oh throw off valve to cond and steam isolating of lph2 , oh of steam isolating valve of lph 3, 4 , oh of safety valve of aux prds or deaerator , oh of safety valve of h.p. heater , oh of safety valve of l.p. heater. , oh of safety valve of cbd tank. , oh of safety valve of flange or stud heatng , oh of safety valve of warm up line. , overhauling of actutator of as 48 valve , oh of actr feed line valvev2 81 or v2 82 or v2 83 or v2 84 , oh of actr of v2 7 or v2 15 or v2 27 , oh of actr drip line valve and ext line valve , oh of actr valve connected to condenser , oh of actr cst make valve , oh of actr of msv l and r , oh of actr of steam isolating valve to lph2 to 4 , oh of actr steam throw off valve to condenser , cut or weld or repl of hp valve 15 to 50mm , cut or weld or repl of hp valve 51 to 100mm , cut or weld or repl of h p valve 101 to 150mm , oh of butterfly valve of condenser , oh of dea and fst with internal painting , repair or replacement of broken hanger , tightening of loose hangers , cut or weld or repl of l.p. valve 15 to 50mm , cut or weld or repl of l.p. valve 51 to 100mm , cut or weld or joint of h.p. pipe 15 to 50mm , cut or weld or joint of h.p. pipe 51 to 100mm , cut or weld or joint of h.p. pipe 101 to 150mm , cut or weld or joint of h.p. pipe 151 to 300mm , lift or straight aprds hdr by cutting weldding , o h of lph 1a , 1b , o h of lph 2 3 and 4 , oh and attend flange leakage of gc i or ii , clean of turbine oil or h2 gas cooler str , repl of damaged sp. valve v2 38 , repl of damaged special valve v2 27 , oh of turbine oil coolers , oh of main ejectors of turbine , oh of h.p. heater , oh of lcv 3to15pcv-5, 14,16,17,tcv 8 , repl bend of lp drip connected to drip pump or condenser , cut damaged bend of hph drip cont to dea , cut weld or repl of h.p. valve 151 to 300mm , blank of crh line for ht and normalizing , oh of h.p. valve nrv in h.p. line , oh of l.p. valve nrv , oh of energy absorber of bfp , oh of dss of aux. prds. - oh of valves during overhauling of unit 11 | quantity - 50305

Sonebhadra, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW
Prev 1 2 3 Next
whatsapp