Latest Metalic Bar Tenders 2026

201 |Bid Value:₹ 7.97 Cr. |EMD:₹ 15.94 Lakh |21-09-2026 3 Days Left|T247 ID-104041488

corrigendum : renovation works including installation of ms angles, ms chain, hook, tiles, stone, railing on public ghats situated in har ki paudi area and along right and left banks of upper ganga canal, mayapur escape channel and ghats situated in dhudhiyabundh

Haridwar, Uttarakhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

202 |Bid Value:₹ 1.75 Cr. |EMD:₹ 3.50 Lakh |22-09-2026 4 Days Left|T247 ID-103453815

corrigendum : ms flat 50x6 and m.s. channel 100x50x6 mm

Ajmer, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

203 |Bid Value:₹ 1.37 Cr. |EMD:₹ 1.38 Lakh |24-09-2026 6 Days Left|T247 ID-104384167

resurfacing of various road under mmgsy (normal) in anand taluka dist : anand pkg. no. and/mmgsy/normal/np/res/2026-27/20- clearing and grubbing, earthwork for embankment, pre-cast interlocking concrete block, granular sub base, compacted wbm, reinforced concrete np3 pipe, built-up spray grout base, built-up spray grout base, bituminous macadam, mix seal surfacing, dismantling existing rcc structure, m-200 trimix cc road, hectometer, ordinary kilometer stone, cautionary warning sign, village name / bump ahead sign, direction sign (junction board), road marking with hot applied thermoplastic paint, cat eye (stimsonite), citizens information board, mmgsy logo board, mmgsy project information board, regulatory/mandatory signs, informatory signs, excavation for foundation, m-100 cement concrete, m-150 cement concrete, tmt bar fe500d reinforcement, weep hole, filter media.

Anand, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

204 |Bid Value:₹ 91.50 Lakh |EMD:₹ 2.75 Lakh |24-09-2026 6 Days Left|T247 ID-103932060

supply of - post fence metal angle (q2) - | quantity - 15000

Darjeeling, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

205 |Bid Value:₹ 80.03 Lakh |EMD:₹ 1.60 Lakh |24-09-2026 6 Days Left|T247 ID-103971828

telecom zonal work under the jurisdiction of sse/tele/srikakulam & palasa in visakhapatnam division - supply ,transportation & installation of optical fibre cable joint supply ,transportation & installation of optical fibre cable joint, supply, transportation, and installation of rcc joint chamber with two piece top cover and bottom cover with hole for drainage and cable entry as per drawing no.rcil/er/drg-02/06 (section-h), supply, transportation and installation of earth electrode (make tata or jindal as per rly. practice) including ms flat for signalling equipments on lever frame, apparatus cases, signal, relay racks, cable termination rcak, block instrument , excavation of trenches of following depth and width 0.3 meter detailed below including clearing of roots and trees etc. for all types of soil, excavation of trenches of following depth and width 0.3 meter detailed below including clearing of roots and trees etc. for all types of soil, laying of signalling/4 quad/ 6 quad/ power cable/telecom cables/ jelly filled cables , excavation of trenches in all kinds of soils including soft rocky area and clearing of track, cutting of masonary floor/walls at station building/ signal goomty/ gate lodge at a depth of 0.5 mtr. to 1.0 mtr , masonry chase cutting 3/2" x 3/2", trenching and fixing of g.i. pipes of different sizes/dwc pipes in hard rocky area up to a depth of 0.3 m to 0.6 m or , transportation, excavation of pit, casting of foundation, plastering and erection of steel apparatus case (half size) with fixing of e-type lock, wiring, cable entry, termination clamping, filling cable pit with sand, painting and lettering etc., as per drg.no. s&t/con/ bbs/92/90. this includes earth work and/or masonry work required for securing the apparatus case as per site condition. railway will supply apparatus case with 'e' type lock only. tenderer shall supply all wiring materials, pbt terminals, fuses, fuse blocks, bus bars, hylum sheet isi mark [6mm thickness], wood plank board of good quality [minimum 3/4" thick, cement and any other materials that are required for the work at his own cost. contractor has to transport all the materials from store at his own cost to the work site. the wiring materials such as wire coils, pbt terminals, fuses, fuse block, etc. should be used from rdso approved sources.1) modification of inside arrangement of apparatus cases if required for fixing of relays/transformers etc, fixing of cable route marker as per drawing in" section-h" at a distance of 100 mtrs. along the trench and at places where the cable route has taken diversion, transportation of ofc from the store of to work site with care, and pushing/ pulling ofc through the hdpe pipes sealing of the duct by simple plugs, transportation of hdpe pipe, painting & lettering of emergency sockets & post including supply of black, white & red oxide, digging of cable pit for the required depth and width to locate the cable at a specific location shown by the railway engineer, repairing of smr module of 48 volt charger , repairing of power supply modules for router, repairing of power supply modules for switch , repairing of power supply modules for modem, printing and supply of maintenance registers of 200 pages, painting of existing apparatus cases without disturbing the terminations and equipments inside, basement plastering of full/half location box, supply of thermo shrink jointing kit for underground cable, supply of ofc distribution (management system) box, supply & laying of split dwc pipe of 120/103 mm dia 2 meter long in already dug cable trenches , supply of power cable 2.5 sq mm 3 core, supply of pvc pipe 25mm (1 inch) dia. heavy duty suitable for electrical wiring ivory colour in &out smooth finish of 3meters length, supply of male telephone line cord, supply of 1.5 volt, ultra alkaline aa battery, supply of eveready multipurpose dry batteries, supply of counter communication system consists of a microphone, a receiver and a speaker.

Visakhapatnam, Andhra Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

206 |Bid Value:₹ 50.00 Lakh |EMD:₹ 1.50 Lakh |21-09-2026 3 Days Left|T247 ID-103899022

corrigendum : building construction and other forestry works - tmt sariya and gi wire as per specifications

Dindori, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

207 |Bid Value:₹ 44.60 Lakh |EMD:₹ Refer Docs |21-09-2026 3 Days Left|T247 ID-104196836

supply of - c100108070 , c100109160 , c100111012 , c100111045 , c110109140 , c120409150 , c120908090 - supply of raw alloy steel rounds and squares as per beml specification | quantity - 71476

Kolar, Karnataka, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

208 |Bid Value:₹ 42.67 Lakh |EMD:₹ 85.33 K |22-09-2026 4 Days Left|T247 ID-103979759

provn of rcc security wall with y shape angle iron and concertina coil over top from bldg p-48 to new residency (along main road) at new residency area under ge gwalior

Gwalior, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

209 |Bid Value:₹ 35.83 Lakh |EMD:₹ 39.30 K |26-09-2026 8 Days Left|T247 ID-104055888

procurement of esp spare parts - erm rapping shaft i 3370l pn 1, erm plain bearing pn, erm pin wheel small pn 06, erm vert shaft-i 2502l pn16, erm vert shaft iii middle bot lvl pn 18, erm inner arm assembly, erm outer arm assembly, erm grip coupling, esp brg assy verticadrive, esp brg adapter sleeve 1211, crm, inner arm assembly pn 07, crm outer arm assembly pn 11, crm plain bearing, crm shock pad, crm shaft end pn 01, 5, crm shaft 50 dia 4790 5 length pn 02, crm shaft 50 dia 2250 5 length pn 03, crm shaft 50 dia 3450 5 length pn 04, crm shaft 50 dia 3190 5 length pn 05, crm shaft set ring pn 06, crm shaft sleeve tube i pn 08, crm shock bar guide 2 front side, crm shock bar guide, rear side, :, crm gb clutch, crm gb coupling, crm shaft gland follower of boiler at 1 x 660 mw, bhusawal tps for aoh.

Bhusawal, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

210 |Bid Value:₹ 35.72 Lakh |EMD:₹ 71.43 K |30-09-2026 12 Days Left|T247 ID-104146897

supply of - side sealing flat as per technical specification enclosed , lintel sealing flat as per technical specification enclosed , sft bottom clamp flat as per technical specification enclosed , side clamp flat 10thk 1686 x 40 as per technical specification enclosed , top clamp flat 10thk 840 x 40 as per technical specification enclosed , top clamp flat 10thk 767 x 40 as per technical specification enclosed - supply of aluminium bronze and ms flats required for annual maintenance of sft gates at njhps nathpa | quantity - 144

Kinnaur, Himachal Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

211 |Bid Value:₹ 35.00 Lakh |EMD:₹ 17.50 K |28-09-2026 10 Days Left|T247 ID-104121799

supply of - 100w high bay light,150w high bay light,250w flood light,80w street light,36w tube light,dura led well 35w,1.5 sqmm x 5c cable ,4 sqmm x 5c cable ,1.5 sqmm x 3c cable,2.5 sqmm x 3c cable ,25x3mm gi earthing strip,6sqmmx1c cable,standard tpn db,tpn dbs vtpn dbs db,spn dbs modulary db,32a rccb 100ma 4 pole,32a rccb 100ma 2 pole,mcb 6a,mcb 10a,db 32a elcb ,tray 100x50mmx16g,cable gland 4sqmmx5c,cable gland 2.5sqmmx5c,cable gland 20mm,cable gland 19mm bpw,junction box 100x100mmx50mm ,flexible cu cable 1.5sqmmx3c,pg gland 19mm,alloy steel d hook heavy duty ,heavy duty steel rubber clamp ,fan pipe ceiling 6 feet length,aluminum saddle strip 25mm,cable tie 300mm,cable tie 250mm,insulation tape mix 30 pcs,6x8mm insulated lugs,2.5x5mm insulated lugs,2.5x6smm insulated lugs,8x20mm gi bolt nut,8x30mm gi bolt nut,100x50mm hot dip gi z strip,anchor fastner 10x100mm,anchor fastner 12x100mm,35x8mm screw,35x10mm pvc grip 6mm,4 sq mm x 5 core cable,1.5 sq mm x 5 core cable ,2.5 sqmm x 3 core cable,1.5 sqmm x 3 core cable,cable 1.5sqmmx3c,25x3mm earthing strip ,6sqmmx1c cable yellow green ,100w led highbay light,150w led highbay light,250w led light,80w led street light,36w led tube light,35w led well glass light,1000w halogen light,tpn double door db,tpn dbs vtpn dbs db,spn dbs incomer 12 way db,single phase db,100x50 mmx16g trays,100x100mmx50mm trays,cable gland 4sqmmx5c ,cable gland 2.5sqmmx5c,cable gland 20mm,cable gland 19mm bpw,pg gland 19mm,alloy steel d hook heavy duty,heavy duty steel rubber clamp,aluminum saddle strip 25mm,fan pipe ceiling of 6 ft,ms angles ,cable support system,anchor fasteners,existing led lights along with cables,, disconnecting - lighting supply and installation inside plant | quantity - 19916

Silvassa, Dadra And Nagar Haveli, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

212 |Bid Value:₹ 34.00 Lakh |EMD:₹ 1.02 Lakh |22-09-2026 4 Days Left|T247 ID-103902013

supply of - weight lifting set seniors , weight lifting bar womens , weight lifting training platform , competition platform weightlifting , wooden wall bar , super power rack weightlifting , weight lifting belts , weight lifting shoes - procurement of weight lifting equipments under saski 2026 | quantity - 80

Srinagar, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

213 |Bid Value:₹ 32.00 Lakh |EMD:₹ Refer Docs |28-09-2026 10 Days Left|T247 ID-104228695

supply of structural materials for hvds 16 to 25 kva dtr - pole mounting arrangement for 3-phase 25/16kva dtrs with 75x40 m s channel, strut with 50x50x6 m s angle and clamps with 50x6 m s flat.

Chittoor, Andhra Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

214 |Bid Value:₹ 30.00 Lakh |EMD:₹ 30.00 K |24-09-2026 6 Days Left|T247 ID-103999615

repair and maintenance of civil work - 1 excavation for foundation up to 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff up to 50 meter lead. (a) loose or soft soil (it.code 4001a pg. 46) 2 excavation for foundation up to 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff up to 50 meter lead.(b) dense or hard soil (it.code 04001b pg. 46) 3 excavation for foundation up to 1.5 m depth including sorting out and tacking of useful materials and disposing off the excavated stuff up to 50 meter lead. (a) loose or soft soil (it.code 048001a pg. 50) 4 excavation for foundation up to 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff up to 50 meter lead.(b) dense or hard soil (it.code 04b001b pg. 50) 5 filling available excavated earth (excluding rock) in trenches. plinth, sides each of foundations etc. in layers not exceeding 20 cm. in depth consolidating deposited layer by ramming and watering. (it.no.4006, 4.12 p.no.48) 6 filling in plinth with sand under floors including watering ramming, consolidating and dressing complete. (sor.it.no.04007a, 4.24 p.no.48) 7 providing and laying cement concrete 1:4:8 (1 cement: 4- coarse sand: 8- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (a) foundation and plinth (it.code 05003a 5.3.3 pg. 52) 8 providing and laying cement concrete 1:3:6 (1 cement: 3- coarse sand: 6 hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (a) foundation and plinth (it.code 05003a 5.3.2 pg. 52) 9 providing and laying cement concrete 1:2:4 (1- cement: 2 coarse sand: 4-graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (a) foundation and plinth (it.code 05010aa, 5.3.13 pg. 53) 10 providing and laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4-graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (b)independent piers, columns, and pillars, upto floor two level (it.code 05010ba 5.3.13 pg. 53) 11 providing and laying cement concrete work 1:2:4(1 cement: 2- coarse sand: 4-graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in(a) foundation footings race or columns and mare concroto it code 0501144 12 provsting saying coured concrete work cement graded stune aggregates 20 min nominal sine) and curing complete excluding cost of formwork and reinforcement for reinforced concrete work in (1) stabu, landing, thelves, balconis, lintels, beams, girders and cantilever upto floor twe (it.code 050118454.1951) provsting and laying cement concrete flooring 1:24 (1-e sand 4-graded stune aggregate 20eun sominaisine)laid in one laye rand finidel with a floating cout of meat cement 50mm thick (code 140158a, 14.71 pgfno.128) 14 provating tmt bar fs415 cenfurament for bcc work including heading, handing and plaeng a position compists up to four tw (it. code 050148a 54111 15 providing tmt bar fe 5000 minlamint for acc work inhaling bending bading and placing in pastion complete upto floor twn level (it code 000140 5411) providing and laging in postttos bubur as specified in tras lielarvet including drilling adequest hole, cleaning the same grouting with hiltihy-200rebar 16 systeem as per manufacturers specifivations strictly in accordance with strictural details hastog minimum depth of embelment 125 mm et compirts for alt floors for any dia (ra) 17 providing and fixing m5 grille of el pattern to wooden frames of window setc. with m. flan at repared spacinge ant frame alrstand, square or round bars with round headed holts anil nuts ur hy strews (a) pain grill (ilcate 10025aa 10.1.0.90) brick work using common burnt clay builtiling bricks having crushing sirvagth 18 sot luu than 35 kg/54.0m. tourtatton and plinth in cement mortar 26 (1 cement: 6-une sand)(b) conventional (it code 60028a, 61371] 19 brick work using commen burnt chay building bricks haining crashing strength ant less than 35 kg/sqcm, in foundation and pliech in cement mortar 1:6 (1-cument-fine sand superstructure above plith level upto floor two leve) () conventional for all love (it code 600zra 60068 pg 71 72+000782a 62 pg. no 73) extra for brickwork in structure above path level up to four two level (1) commentsonal (it.code 000068 6.10 pg 72) 23 hall brick masonry in comition brunt day holding brides taving crushing strength not less than 35 kg/sq.m. in camare mortar 1-41 cement: 4-csarse sand) in fuundation and plinth (b) camational (it. cade 6008aza, 6.3 pg. 733 23 extra for ball brich may lammutus above plinth level upto floor two el(r) conventional (code 060100 632 p. 75) steel work, welded in bulll up sertions frased work including rutting, hunting boxing as position and applying a printing coat of read lead print (alin beams and joists, channels angles tees, flats, with connecting plates or angle cleuts as in mats and cross beams. hip and jack cafters, purtas connected to common rafters and the live fit code 11002aa, 11410) 24 siructural steelwork confirming to 154433-1997) nveted, bolted u rwelded in buith up for all type sections in framest work, including cutting, hosting, fixing in position and applying a priming soat of approved steel prime rall complete a per the structural designs and directions of engineer in-charges column 122 x 61a3mcote 20054.11.4 pg15) 25 providing and fling fimm thick lexan polycarbonate muhi wodl roofing sheet fixed with hilti screw and rubber silicon sealer and alluminium mrip of size th3mm esc complete as directed by engineer in charge (it code 15019, pg.333) pal 24"x24" vitnfied min thick tile flooring over 20mm(average) hase of 26 cement mortar 16 (1. cementficoorisatud)on new mirfare or fixing on existing flooring by adhesive material including dismantling of existing flooring and jnimed with color cement slurry including finished with fouth prounting cleaning the surface in complete for dark shade fit code 14020a, p 129) 27 providing and laying white gland thes imm thick in flooring treads of mepe and landing laid on a bed of 12mm thick cement mortar 13 (1-men-com sand) finishing with flush pointing in white cemem. (it code 1400baa, 14:29 pg116) 28 froviding and laying white glazed tiles grom thick in skirting roers of ps and dadu ze 10mm thick cement planer 13 (1-cement 3-coarse sand) and jounted with white cement slurry)[it code 14009aa 14.32. p127) 29 providing and laymg poliated kita rune slab flooring over 20thm (average) thick base of coment mortar 16 [1-cement: 6-coarse sand) or lm. 1.1.5 (1-lime putty 15-course sand) laid over and jointed with grey cement slurry mixed with pigmest to match the shade of slab including rubbing and polishing etc. congle (a) 25mm thick (it code 140124a, 14.4371281

Ahmedabad, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

215 |Bid Value:₹ 30.00 Lakh |EMD:₹ 1.50 Lakh |21-09-2026 3 Days Left|T247 ID-104230366

supply of - poles , chain link jali , tmt bar , powder coating painting on all items , acessories , hole digging , erection of poles with rcc , curing of poles , erection of jali , erection of tmt bar - chainlink fence alongwith three gates | quantity - 201670

Leh Ladakh, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

216 |Bid Value:₹ 25.33 Lakh |EMD:₹ Refer Docs |18-09-2026 Ending Today|T247 ID-104065432

corrigendum : supply of rounds as per bemls specification | quantity - 29959

Kolar, Karnataka, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

217 |Bid Value:₹ 24.67 Lakh |EMD:₹ Refer Docs |22-09-2026 4 Days Left|T247 ID-103902511

supply of - al alloy plate, al alloy plate grade 6082 t651, stainless steel round bar 15-5ph, stainless steel round bar 15-5ph alloy, stainless steel round bar 303/304, bronze round bar phosphor bronze c54400, aluminium alloy sheet 6061-t6/2024-t4, aluminium alloy plate 6082 t651, al alloy sheet 2014-t6, aluminium alloy plate bs 2l93 t651, al alloy sheet 2014-t6511, copper tube, steel round bar bs 4s-80, stainless steel aisi 304 round bar, stainless steel aisi 304 sheet, stainless steel plate aisi 304, teflon, aluminium alloy rod au4g, aluminium alloy plate bs l111 c-s, epoxy glass nema grade 10 fr-4, s.r.b.f. round bar bs 2966 type 3a superfine, aluminium alloy plate 6061-t651, stainless steel round bar bright steel bs s154d/s96, stainless steel round bar aisi 304 ams 5674 h, aluminium alloy plate bs l115 - quantity - 110

Sultanpur, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

218 |Bid Value:₹ 20.52 Lakh |EMD:₹ 24.02 K |02-10-2026 14 Days Left|T247 ID-104192658

work of replacement/repair of eroded ms plates, bracing pipe, ms angles, channels, beams of eco outlet flue gas ducts, air duct (pa & fd duct, scaph duct) and windbox during aoh in unit-8, cstps.

Chandrapur, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

219 |Bid Value:₹ 20.00 Lakh |EMD:₹ Refer Docs |28-09-2026 10 Days Left|T247 ID-104228712

dp structure materials--d.p set for lt.iiia services with 100x50 ms channel, 75x40mm channel.50x50x6mm angle and 50x6mm m.s. flat as per the drawing enclosed and painted with double coat of best quality red oxide paint

Chittoor, Andhra Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

220 |Bid Value:₹ 16.56 Lakh |EMD:₹ 82.81 K |28-09-2026 10 Days Left|T247 ID-104412507

supply of - qick setting compound rapidite , m sand confirming to is 383 2016 , aggregate 20mm stone aggregate to be crushed rock , aggregate 40mm , aggregate 63mm , load bearing concrete pcc soild blocks , mild steel tmt bars 16 mm dia , mild steel tmt bars 10 mm dia , mild steel tmt bars 08 mm dia , ms binding wire not less than 0.9mm dia , forming 25 mm width expansion joint in concrete slab , construction joints 25 mm deep and 10 mm wide , contraction joint with an initial saw cut of 3 mm , road marking paints as in painting lines dashes arrows letters , hdpe sheet of 400 micron thick , synthetic enamel paint , thinner , cement base paint , wooden form work , wooden form work for end bay panels size 3 x 0.10m , lightweight extruded aluminum alloy straight edge , wooden flat gurmala , water leveling pipe pvc 100 mtr , 18 inch 400mm diameter mortar pan , shovel square , hammer , tape measuring metallic 30m , mason trowel , heavy duty pickaxes with chisel and point ends head weight of 3kg seasoned hardwood handle , single piece hot forged carbon steel powrah , heavy duty crow bar 5 feet length , aluminium spirit level 12 inch , hand gloves conforming - helipad resurfacing | quantity - 6088

Baramulla, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

373+ Latest Metalic Bar Tenders

Live Metalic Bar Tenders 2026

Haridwar, Uttarakhand, India

Ajmer, Rajasthan, India

Anand, Gujarat, India

Darjeeling, West Bengal, India

Visakhapatnam, Andhra Pradesh, India

Dindori, Madhya Pradesh, India

Kolar, Karnataka, India

Gwalior, Madhya Pradesh, India

Bhusawal, Maharashtra, India

Kinnaur, Himachal Pradesh, India

Silvassa, Dadra And Nagar Haveli, India

Srinagar, Jammu And Kashmir, India

Chittoor, Andhra Pradesh, India

Ahmedabad, Gujarat, India

Leh Ladakh, Jammu And Kashmir, India

Kolar, Karnataka, India

Sultanpur, Uttar Pradesh, India

Chandrapur, Maharashtra, India

Chittoor, Andhra Pradesh, India

Baramulla, Jammu And Kashmir, India