Latest Pulverizers Tenders 2026

41 |Bid Value:₹ 58.06 Lakh |EMD:₹ 1.00 Lakh |03-10-2026 16 Days Left|T247 ID-104384877

supply of -passbook or bankbook printer, automated mortar fire direct controller (amfdc) as per mha qrs , 2 - erection & comm chrgs for 220v batt bank - | quantity - 2

Raebareli, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

42 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |21-09-2026 4 Days Left|T247 ID-103684358

supply of air setting mortar (super 3000)as per rwf specn.no. rwf/m/specn-1/031/ 1989 alt 'i'. note: shelf life - 12 months. ]

Bangalore, Karnataka, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

43 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |18-09-2026 1 Day Left |T247 ID-103698493

corrigendum : supply of - calcium cloride for tulip hemostar xf 2.0 , pt pttk control plasmatrol h i for tulip hemostar xf 2.0 , pt pttk control plasmatrol h ii for tulip hemostar xf 2.0 , liquicelin e for tulip hemostar xf 2.0 , pt pttk control plasmatrol h iii for tulip hemostar xf 2.0 , cuvettes and stirrers for tulip hemostar xf 2.0 pack of 100 , uniplastin for tulip hemostar-xf 2.0 5ml - lpo 147 lab | quantity - 21

Jorhat, Assam, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

44 |Bid Value:₹ Refer Docs |EMD:₹ 7.57 Lakh |19-09-2026 2 Days Left|T247 ID-103842385

supply of - 7404200047 telescope sub-assy heavy mortar, sight, 2a mct-3691 - | quantity - 363

Dehradun, Uttarakhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

45 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |19-09-2026 2 Days Left|T247 ID-103863877

supply of - mortar and pestle , volumetric flask , silica crucible with cover , distilled water , spirit blue solution , gloves , dettol handwash , scientist chart related to chemistry , cotton roll , hollow glass rod , copper sulphate , acetone , ammonium chloride , funnel , microscopic glass slide , dropping staining bottle 100 ml , beaker 250 ml , apron lab coat , test tube , ethanol , liquid dishwash , handwash , spirit for lamp , constantant wire , magnin wire , insulation tape , paper pin , rubber bands , adhesive tape , adhesive , chart paper , candle , iron filling , resistance wire , magnifying glass , copper wire dc , hollow prism , concave lens , convex lens , concave mirror , convex mirror , prism , thermometers lab , gylcerine , cottton thread , sand paper , graph paper , diodes kit - flask | quantity - 5265

Moradabad, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

46 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |23-09-2026 6 Days Left|T247 ID-103941865

supply of - potassium silicate chemical resistant mortar confirming to is: 4832 (part-i) 1969 - | quantity - 5000

Hoshangabad, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

47 |Bid Value:₹ Refer Docs |EMD:₹ 2.50 Lakh |21-09-2026 4 Days Left|T247 ID-104055693

Bhojpur, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

48 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |26-09-2026 9 Days Left|T247 ID-104070542

supply of paint mixer with stirrer. input power: 1200-1400w, input voltage: 230 v/50hz, no load s peed: 0-750 rpm, max torque: 10 nm, bit holder:m14 internal threaded, max basket diameter: 140mm [ w arranty period: 30 months after the date of delivery ] ]

Bardhaman, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

49 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |22-09-2026 5 Days Left|T247 ID-104131375

supply of - bench top density meter , analytical weighing balance capacity 500 gm , e2 class calibration weight , magnetic stirrer capacity 5 litre , digital laboratory stirrer , laboratory hot plate size 10 inch , weighing balance capacity 10 kg , digital infrared thermometer - bench top density meter | quantity - 11

Hyderabad, Telangana, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

50 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |29-09-2026 12 Days Left|T247 ID-104132612

supply of - volumetric flasks class b 100ml , volumetric flasksc class b 50ml , volumetric flasks , petri dishes , pipette , glass mortar and pestle , beakers , burettes , bottle top dispenser - procurement of glasswares for synthesis | quantity - 188

Pune, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

51 |Bid Value:₹ Refer Docs |EMD:₹ 1.50 Cr. |06-10-2026 19 Days Left|T247 ID-104333620

supply of - vehicle mounted mortar system - | quantity - 11

Kinnaur, Himachal Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

52 |Bid Value:₹ Refer Docs |EMD:₹ 50.00 K |Refer Docs|T247 ID-104362746

supply, installation, demonstration and training of laboratory equipment - equipment for sampling- digging tools pick axes, shovels, hammers, chisels etc. sieves-gi/brass frame dia 200 mm as per is 460(part 1) - fine aggregates and soils-10 mm, 9.5mm, 6.3mm, 5.6 mm, 4.75 mm, 3.35mm, 2.80 mm, 2.5mm, 2.36 mm, 2.03 mm, 1.70 mm, 1.18 mm, 1 mm, 850 micron, 710, 600, 500, 425, 355, 300, 250, 212, 180, 150, 90 and 75 micron with pan and cover. equipment for testing of coarse aggregates-i.length & thickness gauges (flakiness & elongation index apparatus) ii. ref. standards: is:2720 (part 5), is:9259, bs 1377 liquid limit and plastic limit testing apparatus iii. standard proctor density test apparatus with rammer (light compaction) sand pouring cylinder with tray complete for field density test. v. sampling tins with lids 100 mm dia, 50 mm height vi. stop watch-0.5 sec sensitivity sub-base (granular sub base) sieves - brass frame dia 200 mm as per is 460(part 1) - coarse aggregates-125 mm, 106 mm, 100 mm, 90 mm, 80 mm, 75 mm, 63 mm, 53 mm, 50 mm 45 mm, 40 mm, 37.5 mm, 31.5 mm, 26.5 mm, 25 mm, 22.4 mm, 20 mm, 19 mm, 16 mm, 13.2 mm, 12.5 mm, 11.2 mm, 10 mm, 9.5 mm, 6.3 mm, 5.6 mm, 4.75 mm, 335mm, 2.80 mm, 2.5mm, 2.36mm size with lid and cover equipment for testing of coarse ggregates length & thickness gauges (flakiness & elongation index apparatus) aggregate soundness test apparatus as per is code 2386 (part 4), 18 9377 aggregate impact value test apparatus miscellaneous as per is code 2720 (part 29) steel core cutter with jolly and haminer h. water tank for soaking cbr moulds (4ft * 3ft * 1.5ft) camber board iv. riffle box for 40mm/20mm base (wbm/wmm) l trays for measurement of tack qua ntity, ii. digital thermometers equipment for testing of concrete - 1. slump cone ii. cube moulds (150mm * 150mm * 150mm * 150mm) iii. mortar cube moulds (70.6mm * 70.6mm * 70.6mm) iv. thickness gauge glassware & other accessories- spatulas, scoops, steel scales, measuring tape,casseroles, assorted sizes of enameled trays, porcelain dish, filter paper, funnel, glass marking pencils, heat resistant hand gloves, spirit levels, vernier calipers, mortar with rubber covered pestle reagents: hydrochloric acid, sodium hexametaphosphate, hydrogen peroxide, calcium carbide one set, trichloroethylene, benzene (500ml) ork/subgrade equipment for testing of soils-as per is code 2720 (part 2), is 12175-1987 rapid moisture meter complete with chemicals ii. as per is code 2720(part 16), astm d 1883, bs 1377 lab cbr equipment (complete set) with 12 moulds iii. gas burner, sand bath iv. balances- a) electronic/digital balance (1-2 kg) with the least count of 0.01 g. b) electronic/digital balance (50-60 kg). v. oven (200 deg) thermostatically/digital controlled base (wbm/wmm) equipment for testing of bitumen and emulsion- as per is code 1203 astm d 5 penetration test apparatus with standard needles (digital) ii. water bath (arubient to 100 deg * c ) digits) controlled (50l capacity) iv. tar viscometer as per is code 13826 (part 1), astm d 2172, aashto t164 equipment for testing bituminous mixes- electrically operated centrifuge type bitumen extractor 1.5l capacity with 1l benzene v. core cutting machine with bit & barrel of size 100mm with 5hp generator vi. as per is code 2720 (part 7 and 8), is 9198, is 10074, bs:1377 astm d 698, d 1557 compression testing machine (200 tonnes capacity) with 0.1kn least count (digital) vii. temperature controlled water tank for curing-48"x24"x20" as per is code 1205 and astm d 36 softening point apparatus/ ring & ball appartus amc charges for 04 years after 01 year of compulsory warranty period for testing & quality control division, nalanda rural works department, government of bihar.

Nalanda, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

53 |Bid Value:₹ Refer Docs |EMD:₹ 2.00 Lakh |21-09-2026 4 Days Left|T247 ID-104369948

Panchmahal, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

54 |Bid Value:₹ Refer Docs |EMD:₹ Refer Docs |21-09-2026 4 Days Left|T247 ID-104400447

tggenco-ytps- supply of porosint mortar with liquid binder, ss mesh and ss pins for refractory gap sealing at first pass, extended pass junction and pent house for boiler/u-i and ii/stg-i/ytps.

Nalgonda, Telangana, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

55 |Bid Value:₹ 39.98 Lakh |EMD:₹ 80.00 K |22-09-2026 5 Days Left|T247 ID-103894936

rehabilitation of dismantled concrete areas in rd pump room, tunnels and substations - the work involves chipping of unsound/ weak concrete structures such as columns, beams, slabs, underside of staircase, rehabilitation by miro-concreting, applying epoxy coating, pressure grouting of leakage points, applying repair mortar, leak fixing

Ernakulam, Kerala, India

Matching BOQ Items

75mm average thickness, 50mm average thickness, bars upto 12 mm diameter, bars above 12 mm diameter, bars upto 12 mm diameter, bars above 12 mm diameter, supply fabrication of tor steel reinforcement with tmt bars fe 500d or more as per site requirement such as l-shaped shear connector stirrups in the form of u-shaped bars additional reinforcement of required length diameter etc including straightening cutting bending placing in position binding with gi wire of 18 gauge etc complete in all respects additional bars shall be provided wherever the diameter of the existing corroded reinforcement needs to be replaced after cutting the required bars as main reinforcement to the required length with proper development length etc complete all as per site requirement and directions of engineer-in-charge, supplying and fixing of gi weld mesh of 100mm x 100mm x 25mm size or higher wire mesh firmly anchored to the concrete surface with shear connectors over the area to be plastered including the cost of materials labour tool plants etc complete as directed by the engineer-in-charge supply fixing of shear connectors scaffolding shall be paid separately, upto and including 12mm dia bar 100 to 200 mm depth, above 12mm upto 20mm dia bar 100 to 200 mm depth, providing mixing and applying epoxy resin bonding agent over the chipped portion of old concrete surface prior to placing the new concrete as per the manufactures specification including cleaning the surface cost all material labour etc complete as per site requirement and directions of engineer-in-charge, supply of dual shrinkage compensated fibre reinforced polymer modified repair mortar of approved make, providing mixing and applying 50 mm average thickness dual shrinkage compensated fibre reinforced polymer modified repair mortar on the prepared surface in 3 layers on site to enable completion of pouring in a continuous operation cut the edges of the repair vertically to a minimum depth of 5 mm water powder ratio shall be strictly maintained as per manufacturers recommendation work to be progressed continuously without any gap curing to be done as per regular practice with water the rate quoted shall include cost of all labour for mixing laying consolidating curing tools plants consumables costs of centering and shuttering at edges and corners other incidentals etc complete all as directed by the engineer-in-charge payment under this item shall be made only after proper wet curing and surface has been satisfactorily evaluated by sounding tapping with a blunt metal instrument the cost for repair mortar shall be paid separately, providing and laying ready mix non shrink free flowing cementitious micro-concrete with a minimum compressive strength of 50nmm2 of approved make micro-concrete shall be mixed with 6mm aggregate on site at 50 weight of powder to enable completion of pouring in a continuous operation water-powder ratio shall be strictly maintained as per manufacturers recommendation work to be progressed continuously without any gap curing to be done as per regular practice with water the rate quoted shall include cost and conveyance of all materials labour for mixing laying consolidating curing etc complete all as directed by the engineer-in-charge, supply and fixing of slurry tight formwork which should not deform and leak due to pressure of micro-concrete provision should be made for a suitable feed hopper for pouring concrete the form work should be coated with the mould release agent prior to final fixing in position proper supporting arrangements to be made for keeping the shutter in correct line and length etc complete all as directed by the engineer-in-charge the rate quoted shall include cost and conveyance of all materials labour for laying consumables etc complete all as directed by the engineer-in-charge, providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diameter 20mm to 30mm up to depth from 30mm to 80mm or half the thickness of member whichever is less at required spacing but not exceeding the thickness of member or 300mm making grooves of size 12mmx12mm along the crack line and making the hole crack dust free by blowing compressed air and then washing with water and sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure the rate quoted shall be inclusive of cost of all materials hire charges of all machineries labour etc complete all as directed by the engineer-in-charge, injecting two component high strength epoxy resin grout polyurethane grout in the fixed steel packer in proportion recommended by the manufacturer hydrophobic tough rigid and high strength human friendly product, injecting low-viscosity epoxy resin in the fixed steel packer under controlled pressure using suitable injection pump to fill cracks and voids and restore structural integrity, built up tubular scaffolding having width of 125m with steel board up to corresponding levels including support scaffolding up to 25m, built up tubular scaffolding having width of 125m with steel board up to corresponding levels including support scaffolding - above 25m up to 5m, filling the prepared expansion joints 20mmx10mm with fuel-resistant two-component polysulphide joint sealant applied after proper cleaning priming of the joint surfaces and backer rod placement wherever required ensuring a smooth and uniform finish all complete as directed by the engineer- in- charge, providing and applying a flexible two-component hand-applied rapid curing hybrid polyurea coating system designed for waterproofing and protection the product combines the advantages of a seamless coating with high durability excellent abrasion resistance and long life cycle performance polyurea is to be applied over a suitable primer as per manufacturers specifications primers shall be applied at a coverage of approximately 025 kgm for concrete and 015 kgm for steel using roller or brush and allowed to become touch-dry before application of the polyurea coating polyurea coating shall be applied in two coats to achieve a minimum dft of 15 mm application shall be by roller brush trowel or squeegee followed by a spiked roller to release entrapped air for vertical applications polyurea thickener shall be added to part a iso before mixing with part b amine the coating shall extend a minimum of 300 mm above finished floor level at terminations and be sealed in a groove of 20 mm 10 mm flushed with polymer-modified mortar as per vendor recommendations where required apply a 200 gsm non-woven geotextile membrane over the cured polyurea coating

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

56 |Bid Value:₹ Refer Docs |EMD:₹ 25.00 K |22-09-2026 5 Days Left|T247 ID-104143603

supply of spare parts and repairing works - elect. coil (80 x 20, 290 turn, nicrome), coil connecting bar (brass made), roast bricks (60 x 40), slide tali (no. 27), slide tali (no. 29), hole bricks (no. 115), hole bricks (no. 100), angle bricks (no. 88), floor bricks set (16-24, 9 pcs), bricks (no. 84), plate bricks (24x12x3), standard bricks, coil bricks, mortars, lali, cali, cement, etc. (bag), labour charges for dismantling & fitting of new coils, connecting bar & different bricks, repairing of main gates of 2 nos. furnace, glass wool (128 grade, per kg), s.s. rod ( dia-10 mm, ft), labour charges dismantling & fitting of new glass wool, reairing of blower, repairing & maintenance of pllution devices of rajpur crematorium under rajpur sonarpur municipality.

South 24 Parganas, West Bengal, India

Matching BOQ Items

elect coil 80 x 20 290 turn nicrome, coil connecting bar brass made, roast bricks 60 x 40, slide tali no 27, slide tali no 29, hole bricks no 115, hole bricks no 100, angle bricks no 88, floor bricks set 16-24 9 pcs, bricks no 84, plate bricks 24x12x3, standard bricks, coil bricks, mortars lali cali cement etc bag, labour charges for dismantling fitting of new coils connecting bar different bricks, repairing of main gates of 2 nos furnace, glass wool 128 grade per kg, ss rod dia-10 mm ft, labour charges dismantling fitting of new glass wool, reairing of blower, repairing maintenance of pllution devices

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

39 Latest Pulverizers Tenders

Live Pulverizers Tenders 2026

Raebareli, Uttar Pradesh, India

Bangalore, Karnataka, India

Jorhat, Assam, India

Dehradun, Uttarakhand, India

Moradabad, Uttar Pradesh, India

Hoshangabad, Madhya Pradesh, India

Bhojpur, Bihar, India

Bardhaman, West Bengal, India

Hyderabad, Telangana, India

Pune, Maharashtra, India

Kinnaur, Himachal Pradesh, India

Nalanda, Bihar, India

Panchmahal, Gujarat, India

Nalgonda, Telangana, India

Ernakulam, Kerala, India

South 24 Parganas, West Bengal, India