Latest Tampers Tenders 2026

21 |Bid Value:₹ 81.00 Cr. |EMD:₹ 1.62 Cr. |26-09-2026 7 Days Left|T247 ID-103314607

corrigendum : procurement of 8 nos. amphibian dredger

Gautam Budhnagar, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

22 |Bid Value:₹ 61.50 Cr. |EMD:₹ 1.00 Cr. |30-09-2026 11 Days Left|T247 ID-103803262

supply, erection and commissioning of 500 tph capacity dredger at irel, oscom

Ganjam, Orissa, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

23 |Bid Value:₹ 61.50 Cr. |EMD:₹ 1.00 Cr. |30-09-2026 11 Days Left|T247 ID-103838483

supply of - supply, erection and commissioning of 500 tph capacity dredger at irel, oscom - | quantity - 1

Ganjam, Orissa, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

24 |Bid Value:₹ 13.67 Cr. |EMD:₹ 5.00 Lakh |21-09-2026 2 Days Left|T247 ID-103777303

corrigendum : mine development & operations service(mdo) - per mt based - under ground mining; hiring the services of track mounted crushing and screening plant and other machineries for excavation loading, transport crushing screening loading and transportation f..

Nagpur, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

25 |Bid Value:₹ 9.00 Cr. |EMD:₹ 18.00 Lakh |05-10-2026 16 Days Left|T247 ID-104328466

supply of - refuse compactor (v2) (q2) - | quantity - 20

Meerut, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

26 |Bid Value:₹ 6.80 Cr. |EMD:₹ 5.00 Lakh |06-10-2026 17 Days Left|T247 ID-104337616

annual maintenance contract for work of operation and monitoring of conveyer system, crusher, stacker reclaimer, loading of coal in ground hopper of short conveyer and allied works, chp-d, unit-8&9 of cstps, chandrapur for 2 year

Chandrapur, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

27 |Bid Value:₹ 5.22 Cr. |EMD:₹ 10.44 Lakh |30-09-2026 11 Days Left|T247 ID-103927336

provision of s&t utility shifting in sbc and mys divisions under cn/bnc unit. engaging mechanical excavators like jcb or other machineries for regarding and levelling the formation, dismantling any infringing structures, clearing and removing debris etc., with all leads and lifts, supply and installation of ofc joint closure conforming totec spec. and splicing of optic fibre cable' (48 fibres) and testing of fibre, supply and installation of control ip telephones with hands free and gooseneck operation for way side station, supply and installation of sip based basic ip phone , supply and installation of layer 2 switch as per rdso/spn/tc/65/2021, rev.6.0 orlatest. minimum 8+2 port manageable with 8 nos 10/100/1000 mbps ethernet port, poe+ & single fiber 2 nos 1g sfp port with bx sm sfp optical modules loaded including mounting kit and all the accessories. inspection rdso , supply, installation, testing and commissioning of mediaconvertor fibre to ethernet tosupport distance range of 20km over single mode fibre of d- link / mrotek, supply of in-built gnss based cable route tracer with 10w, 500 ma, 85v transmitter suitable for detecting & mapping underground cables with accuracy which can up to 3-5 cm or better, with current directionup/down arrows, remote calibration check feature. supply shall include inbuilt rtk enabled receiver, transmitter, compatible dual bluetooth android phone with rtk mobile application preinstalled in android device along with minimum 5 years subscription, compatible with ntrip and rtcmv3.x messaging standards and holder & standard accessories.

Mysore, Karnataka, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

28 |Bid Value:₹ 4.28 Cr. |EMD:₹ 5.35 Lakh |21-09-2026 2 Days Left|T247 ID-104215391

hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; mini truck mounted telescopic tilting lighting tower of 7mtr long with dg set 08 nos 400w led flood light fittings; mini truck m..

Sundergarh, Orissa, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

29 |Bid Value:₹ 4.22 Cr. |EMD:₹ 4.97 Lakh |21-09-2026 2 Days Left|T247 ID-103381112

corrigendum : hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; hiring of 02 nos heavy duty hard rock drill machine with all accessories for a total of 1800 hrs with operator and without fol t..

West Siang, Arunachal Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

30 |Bid Value:₹ 3.90 Cr. |EMD:₹ 3.90 Lakh |21-09-2026 2 Days Left|T247 ID-103606284

operation and maintenance works for mangaleri transfer station (150 tpd handling capacity) for zone i, tambaram city municipal corporation

Kanchipuram, Tamil Nadu, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

31 |Bid Value:₹ 3.84 Cr. |EMD:₹ 3.84 Lakh |21-09-2026 2 Days Left|T247 ID-103608410

operation and maintenance works for kannadapalayam transfer station (150 tpd handling capacity) for zone iv, tambaram city municipal corporation

Kanchipuram, Tamil Nadu, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

32 |Bid Value:₹ 2.79 Cr. |EMD:₹ 2.89 Lakh |19-09-2026 Ending Today|T247 ID-103857621

custom bid for services - operation of material handling equipments like lister truck, fork lift etc with collection of released material from different locations and dumping at nominated scrap yard and loading unloading of store materials , custom bid for services - provision of hiring of truck of 22(dot)5t capacity including manpower for loading unloading of railway material , custom bid for services - provision of hiring of truck of 910t capacity including manpower for loading unloading of railway material , custom bid for services - provision of hiring of hydra jcb on per day basis (for 8 hrs) for sick line m&p activities at ioh shed

Mumbai, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

33 |Bid Value:₹ 2.73 Cr. |EMD:₹ 6.00 Lakh |19-09-2026 Ending Today|T247 ID-104215793

comprehensive oandm of the 06 no. of portable refuse compactors of 08 cum capacity each with 03 no of hook loaders including other allied works necessary for smooth operations of the 03 nos transfer stations of jmc for a period of 03 years

Jammu, Jammu And Kashmir, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

34 |Bid Value:₹ 1.90 Cr. |EMD:₹ 5.71 Lakh |24-09-2026 5 Days Left|T247 ID-104086939

maintenance of ash dyke including binding material, drainage, pedestal, jcb work and miscellaneous civil works at wtps

Kheda, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

35 |Bid Value:₹ 1.68 Cr. |EMD:₹ 2.52 Lakh |03-10-2026 14 Days Left|T247 ID-104016765

annual contract for servicing of stacker/re-claimer and allied equipments, operation and maintenance of de and ds systems at chp-2/rtps

Raichur, Karnataka, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

36 |Bid Value:₹ 1.64 Cr. |EMD:₹ 40.90 K |23-09-2026 4 Days Left|T247 ID-104120295

hiring of special purpose mining or earth moving machines (monthly basis) - as per buyer's requirement; fogging machine; fog canon stationary

Sidhi, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

37 |Bid Value:₹ 1.35 Cr. |EMD:₹ 2.70 Lakh |22-09-2026 3 Days Left|T247 ID-103898929

hiring of special purpose mining or earth moving machines (monthly basis) - as per buyer's requirement; tractor with heavy duty grass cutting machine; tractor with heavy duty grass cutting machine cutting width 15 feet approx

Kolkata, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

38 |Bid Value:₹ 1.34 Cr. |EMD:₹ 2.68 Lakh |25-09-2026 6 Days Left|T247 ID-104387952

supply of jcb dumper/tipper tractor trolley for encroachment removal drive work in urban service, gnida.

Gautam Budhnagar, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

39 |Bid Value:₹ 1.32 Cr. |EMD:₹ 2.23 Lakh |25-09-2026 6 Days Left|T247 ID-104345930

hiring of special purpose mining or earth moving machines (monthly basis) - as per buyer's requirement; dumper, loader, excavator, earth moving equipment, material handling equipment; backhoe loader , tracked hydraulic excavators , tipper , pump set ..

Bokaro, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

40 |Bid Value:₹ 1.29 Cr. |EMD:₹ Refer Docs |23-09-2026 4 Days Left|T247 ID-103952661

repair jobs in twin table cars, rail changing, mom, l&t stands, radialpart, dummy bar conveyors, gas cutting machines(gcm) etc. and other equipments of cc machines in ccd/sms-1: 1. twin table car rail track repair/replacement: dismantling of damaged rail, repair of pedestal supports, erection of new rail, and alignment of rail w.r.t. existing rail, welding of joints. 2. twin table car mast dismantling, repair/replacement: dismantling, fabrication, erection of mast. dismantling of damaged mast, removal of damaged portion of mast, fabrication, welding of support and bracing pipes, erection of mast, adjustment of tie rod. 3. twin table car current collector dismantling, repair/erection: fabrication and erection of current collector. dismantling of damaged current collector, fabrication of current collector frame, removal and reconditioning of guide rollers, fixing of guide rollers, erection of current collector, and connection of mast. 4. twin table car wheel changing: dismantling of drive gear box and wheel, fixing of new wheel assembly, erection of drive gear box in case of drive wheel changing, lubrication of the wheel. 5. twin table car lt/ct drives repair/re-conditioning: dismantling of lt/ct gear boxes, changing of internals, re-conditioning/changing of couplings. 6. twin table car rollers bearing/bush changing/re-conditioning: removal of damaged bearings, fixing of bush/bearing rollers, fixing of bearing covers. 7. twin table car apron plate repair/replacement: removal of damaged apron plates, fixing of plates/repair of plates. 8. twin table cart: removal of rollers along with bearing housing, erection of new rollers along with bearing housing, alignment of roller coupling, alignment of drive gear boxes w.r.t bevel gear boxes, alignment of rollers w.r.t machine roller tables and hfl roller tables. 9. radial part: repositioning of tk stand in position, alignment and bolt tightening. 10. spindle fixing and spindle pad changing: fixing of spindle, locking the spindle in position, change of spindle pads if required. 11. radial part: checking of radial alignment with template and rectification. 12. radial part - repair/repositioning/replacement of tk tie rod: repositioning of dislocated tie-rod/removal of damaged tie-rod and fixing of tie-rod and locking. 13. tk stand base repair in ccms: removal of damaged base plate, preparation of base, preparation of new base plate. fixing the new base plate and welding the base plate complete. 14. tk1 guide repair in ccms: removal of damaged guide. preparation of guide plate as per curvature. fixing the new guide plate and welding the guide plate complete. 15. mom "c" frame repair in ccm#2: setting pads changing, setting pads shims changing, mould adjustment jacking plates changing, mould location plates changing, swing bolts changing, tee bolt changing, water leak arresting, any welding/cutting works on c frame, all bolts tightening. 16. ccm#2 radius correction: assembling of 12mt template, checking of radial alignment with template and rectification of strand. checking of template with master template. dismantling of template and put the template in designated place roller tables. 17. mom c frame leveling: checking of mom c frame leveling with straight edge and rectification. 18. repair/change of idle roller stands (small) in gega gas-cutting machines: removal of damaged idle roller assembly, reconditioning of bearing blocks, greasing, fixing back of idle roller assemblies. 19. repair of water cooled beams in gcms: fabrication/repair of damaged portion of water-cooled beams, cleaning/changing of chocked portions of water-cooled beams, flushing of beams, water testing of beams. 20. repair of idle roller stands (big) in gcms: dismantling of bearing blocks of idle roller stands, repair/change/rotation of roller as per requirement, assembly of bearing blocks, greasing and alignment. 21. change of idle roller stands (big) in gcms: dismantling of idle roller stand assembly, cleaning of foundation by gas-cutting and lancing, erection of new idle roller stand, connection of grease and water lines, alignment with assembling of 12mt. template, checking of radial alignment with template and rectification of strand. 22. fabrication/repair/change of lt strikers: dismantling of damaged lt striker, fabrication/repair of striker as per requirement, testing of striker and adjustment. 23. repair/replacement of pipelines-dn-15: isolation of pipelines from gases, purging of pipelines with inert gas, repair/fabrication of damaged pipelines of all gases, flushing of repaired pipelines, testing for leakages and opening of isolation valves. 24. repair/replacement of pipelines-dn-20: isolation of pipelines from gases, purging of pipelines with inert gas, repair/fabrication of damaged pipelines of all gases, flushing of repaired pipelines, testing for leakages and opening of isolation valves. 25. repair/replacement of pipelines-dn-25: isolation of pipelines from gases, purging of pipelines with inert gas, repair/fabrication of damaged pipelines of all gases, flushing of repaired pipelines, testing for leakages and opening of isolation valves. 26. tundish heating gear box repairs: dismantling, repair/bearing changing re-fixing of gearbox. 27. tundish heating system tie rod fixing/repairs: repair of tie-rod, welding of crank bush and connection to gearbox. 28. tundish car copy roller guide repairs: repair/fabrication and welding of copy roller guides. 29. tundish car hump repairs: dismantling and repositioning/re-conditioning of tundish car humps. 30. mould table top: cleaning of mould table top of mould oscillating mechanism (mom) from metal jam by gas cutting. replacing the damaged mould fixing bolts, mould adjustment bolts and eye bolts. 31. jam cleaning below mom: removing the bunker plate below the oscillating table and cleaning the metal jams below the mould table and oscillating lever. fixing back the plate after cleaning and ensuring that the oscillation is smooth. 32. dismantling, repair, reconditioning, erection of mom c-frame: dismantling of mom top link, arresting of counter weight link, dismantling of c-frame, repair of c-frame, dismantling of c-frame water connections, re-conditioning/replacement of bottom link shaft, fixing of c-frame, fixing of top link, connection of water lines and alignment of cframe with respect to level and machine axis using mould and section ethelons. 33. repair, alignment of c-frames w.r.t. sections: checking of mould c-frame with respect to axis of the strand, rectification of location of mould bed bolts blocks, straightening of c-frame arms, leveling of c-frame with respect to machine radius, arresting of water leakages. 34. dismantling, repair, erection of scz water seat block: dismantling of scz water seat block and removal of metal jam, repair of the block, removal of ms pipelines/joints if any and replacement with ss pipelines/joints, fixing of water seat block. 35. repair jobs on mom drive gear box: reconditioning of mom drive gear box including change of internals. alignment of drive frame with spirit level and master level. 36. repair jobs on eccentric unit: eccentric tie rod adjustment for smooth oscillation of the mechanism. adjustment of counter weights. 37. change of mom eccentric unit: dismantling of defective eccentric unit, fixing of reconditioned/repaired eccentric unit and adjustment of oscillation. 38. change of mom top link: arresting of mould c-frame, dismantling of mom top link, fixing of new top link, leveling of c-frame with respect to machine radius. 39. quarterly repair/rectification jobs on l&t stand: cleaning of all weld joints of turret area, checking of housing top flange bolts for looseness and measurement of gap with feeler gauge in presence of site engineer, cleaning of drive gear box area, checking of drive gear box flange bolts surface for any gap with feeler gauge, thorough cleaning of axle retaining covers of top and bottom links and measurement of clearances, rectifications as suggested by the engineer. 40. change of drive gear box of l&t stand: dismantling of drive room, dismantling of drive motor frames and motors, dismantling of gearbox, erection and alignment of drive motors and frames, erection of drive gearbox, erection of drive room and welding. 41. half yearly repair/rectification jobs on l&t stand: removal of floor covers, cleaning of all weld joints thoroughly for dp test, providing assistance for dp test as instructed by the engineer, rectification of defects noticed in dp test. 42. annual repair/rectification jobs on l&t stand: dismantling of floor covers, thorough cleaning of all weld joints of l&t stand, providing assistance for dp test, rectification of defects noticed in dp test, load test of l&t stand, measurement of deflection readings as per the instructions of the engineer, measurements of clearances of column foundation bolts, thermal tightening of column foundation bolts as per the instructions of the engineer, fixing of floor covers. 43. repair/change of l&t drive room: dismantling of drive room structures, fabrication/repair of drive room structures, erection, alignment and welding of drive room structures. 44. replacement of seals of l&t rotary joint: dismantling of rotary joint, dismantling of seals, thorough cleaning, reconditioning/repair of rotary joint, fixing of seals as per the sequence and as suggested by the site engineer. 45. repair of dummy bar conveyers: maintenance of all 24 dummy bar conveyors of ccm-1 to ccm-6 by carrying out the following jobs to keep the conveyors in working condition, replacing damaged conveyors along with parking rollers, grip assembly, replacing the damaged rope, repairing the hook carriage, rectification of front and back guides, channels of conveyor. repair of horizontal guides and other structural repair of conveyor, reposition of conveyor carriage assembly in support guides in case of any problem, removing the dummy bar if it is defective or for carrying out the repair of conveyor, repair/replacement of vertical guide channels, fabrication of small parts like hook carriage tie rod, stopper etc. 46. mom lever unit bearing changing: jobs including boq no 32 and boq no 33 removal of counter weights, mom lever unit bearing changing on both sides by removing plumber blocks and fixing the same along with counter weights. also oscillation checking and rectification. 47. tk1/tk spline welding: tk1/tk stands igb spline housing and welding both in position and removed stands if required. 48. igb changing for tk stand: igb removal from the stand and fixing, orientation changing of igb if required. 49. igb locking: tk1/tk stands igb locking with bracket along with spline welding to stand. 50. idle roller stand roller changing: removal of damaged roller, cleaning, new roller fixing. 51. ccm#2 mould supporting frame top link changing/revisioning: removal of top link, revision/changing of bearings in the top link, fixing of top link in the position. 52. ccm#2 mould supporting frame bottom shaft bearing changing/revisioning: removal of top link, mould c-frame, revisioning/changing of bearings/shaft, fixing of shafts, c-frame and top link. 53. total changing/revisioning of ccm#2 mould supporting frame: removal of mould c-frame, changing/revisioning of mould water seats, arresting water leakages from frame, revisioning of leveling pads, fixing of revisioned or spare stand. 54. total changing/revisioning of ccm#2 section supporting roller: removal of damaged supporting roller, fixing of spare/revisioned supporting roller. 55. total checking of ccm#2 alignment with section and mould ethelon: placement of mould ethelon, placement of section ethelon, checking the total radius with template from mould c-frame to n1, removal of both section and mould ethelon, radius correction to be done. 56. periodical maintenance of electric hoist in mom room of ccm: strictly follow the periodical maintenance schedule, gear box oil top-up, greasing of guide and guide wheels, tightening of foundation bolts.

Visakhapatnam, Andhra Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

368+ Latest Tampers Tenders

Live Tampers Tenders 2026

Gautam Budhnagar, Uttar Pradesh, India

Ganjam, Orissa, India

Ganjam, Orissa, India

Nagpur, Maharashtra, India

Meerut, Uttar Pradesh, India

Chandrapur, Maharashtra, India

Mysore, Karnataka, India

Sundergarh, Orissa, India

West Siang, Arunachal Pradesh, India

Kanchipuram, Tamil Nadu, India

Kanchipuram, Tamil Nadu, India

Mumbai, Maharashtra, India

Jammu, Jammu And Kashmir, India

Kheda, Gujarat, India

Raichur, Karnataka, India

Sidhi, Madhya Pradesh, India

Kolkata, West Bengal, India

Gautam Budhnagar, Uttar Pradesh, India

Bokaro, Jharkhand, India

Visakhapatnam, Andhra Pradesh, India