Latest Welding Work Tenders 2026

21 |Bid Value:₹ 1.47 Cr. |EMD:₹ 2.95 Lakh |07-10-2026 19 Days Left|T247 ID-104365925

welding portion supply and execution in aden/l/izn section

Izatnagar, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

22 |Bid Value:₹ 1.34 Cr. |EMD:₹ 2.68 Lakh |05-10-2026 17 Days Left|T247 ID-104229152

reconditioning of wheel-burnt/scabbed rails/cupped welds by using rdso approved technology such as micro flow metal spray powder technique or robotic welding technology under the jurisdiction of sr. den (west)/ckp (2nd call).

Chakradharpur, Jharkhand, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

23 |Bid Value:₹ 1.31 Cr. |EMD:₹ 2.62 Lakh |18-09-2026 Ending Today|T247 ID-103734541

open tender for flash butt welding of 60kg/52kg (90/72 uts,r-260),(new/sh/sr/ swr/lwr) rail at site with contractors mobile flash butt welding plant over asansol division.

Asansol, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

24 |Bid Value:₹ 1.29 Cr. |EMD:₹ Refer Docs |23-09-2026 5 Days Left|T247 ID-103952661

repair jobs in twin table cars, rail changing, mom, l&t stands, radialpart, dummy bar conveyors, gas cutting machines(gcm) etc. and other equipments of cc machines in ccd/sms-1: 1. twin table car rail track repair/replacement: dismantling of damaged rail, repair of pedestal supports, erection of new rail, and alignment of rail w.r.t. existing rail, welding of joints. 2. twin table car mast dismantling, repair/replacement: dismantling, fabrication, erection of mast. dismantling of damaged mast, removal of damaged portion of mast, fabrication, welding of support and bracing pipes, erection of mast, adjustment of tie rod. 3. twin table car current collector dismantling, repair/erection: fabrication and erection of current collector. dismantling of damaged current collector, fabrication of current collector frame, removal and reconditioning of guide rollers, fixing of guide rollers, erection of current collector, and connection of mast. 4. twin table car wheel changing: dismantling of drive gear box and wheel, fixing of new wheel assembly, erection of drive gear box in case of drive wheel changing, lubrication of the wheel. 5. twin table car lt/ct drives repair/re-conditioning: dismantling of lt/ct gear boxes, changing of internals, re-conditioning/changing of couplings. 6. twin table car rollers bearing/bush changing/re-conditioning: removal of damaged bearings, fixing of bush/bearing rollers, fixing of bearing covers. 7. twin table car apron plate repair/replacement: removal of damaged apron plates, fixing of plates/repair of plates. 8. twin table cart: removal of rollers along with bearing housing, erection of new rollers along with bearing housing, alignment of roller coupling, alignment of drive gear boxes w.r.t bevel gear boxes, alignment of rollers w.r.t machine roller tables and hfl roller tables. 9. radial part: repositioning of tk stand in position, alignment and bolt tightening. 10. spindle fixing and spindle pad changing: fixing of spindle, locking the spindle in position, change of spindle pads if required. 11. radial part: checking of radial alignment with template and rectification. 12. radial part - repair/repositioning/replacement of tk tie rod: repositioning of dislocated tie-rod/removal of damaged tie-rod and fixing of tie-rod and locking. 13. tk stand base repair in ccms: removal of damaged base plate, preparation of base, preparation of new base plate. fixing the new base plate and welding the base plate complete. 14. tk1 guide repair in ccms: removal of damaged guide. preparation of guide plate as per curvature. fixing the new guide plate and welding the guide plate complete. 15. mom "c" frame repair in ccm#2: setting pads changing, setting pads shims changing, mould adjustment jacking plates changing, mould location plates changing, swing bolts changing, tee bolt changing, water leak arresting, any welding/cutting works on c frame, all bolts tightening. 16. ccm#2 radius correction: assembling of 12mt template, checking of radial alignment with template and rectification of strand. checking of template with master template. dismantling of template and put the template in designated place roller tables. 17. mom c frame leveling: checking of mom c frame leveling with straight edge and rectification. 18. repair/change of idle roller stands (small) in gega gas-cutting machines: removal of damaged idle roller assembly, reconditioning of bearing blocks, greasing, fixing back of idle roller assemblies. 19. repair of water cooled beams in gcms: fabrication/repair of damaged portion of water-cooled beams, cleaning/changing of chocked portions of water-cooled beams, flushing of beams, water testing of beams. 20. repair of idle roller stands (big) in gcms: dismantling of bearing blocks of idle roller stands, repair/change/rotation of roller as per requirement, assembly of bearing blocks, greasing and alignment. 21. change of idle roller stands (big) in gcms: dismantling of idle roller stand assembly, cleaning of foundation by gas-cutting and lancing, erection of new idle roller stand, connection of grease and water lines, alignment with assembling of 12mt. template, checking of radial alignment with template and rectification of strand. 22. fabrication/repair/change of lt strikers: dismantling of damaged lt striker, fabrication/repair of striker as per requirement, testing of striker and adjustment. 23. repair/replacement of pipelines-dn-15: isolation of pipelines from gases, purging of pipelines with inert gas, repair/fabrication of damaged pipelines of all gases, flushing of repaired pipelines, testing for leakages and opening of isolation valves. 24. repair/replacement of pipelines-dn-20: isolation of pipelines from gases, purging of pipelines with inert gas, repair/fabrication of damaged pipelines of all gases, flushing of repaired pipelines, testing for leakages and opening of isolation valves. 25. repair/replacement of pipelines-dn-25: isolation of pipelines from gases, purging of pipelines with inert gas, repair/fabrication of damaged pipelines of all gases, flushing of repaired pipelines, testing for leakages and opening of isolation valves. 26. tundish heating gear box repairs: dismantling, repair/bearing changing re-fixing of gearbox. 27. tundish heating system tie rod fixing/repairs: repair of tie-rod, welding of crank bush and connection to gearbox. 28. tundish car copy roller guide repairs: repair/fabrication and welding of copy roller guides. 29. tundish car hump repairs: dismantling and repositioning/re-conditioning of tundish car humps. 30. mould table top: cleaning of mould table top of mould oscillating mechanism (mom) from metal jam by gas cutting. replacing the damaged mould fixing bolts, mould adjustment bolts and eye bolts. 31. jam cleaning below mom: removing the bunker plate below the oscillating table and cleaning the metal jams below the mould table and oscillating lever. fixing back the plate after cleaning and ensuring that the oscillation is smooth. 32. dismantling, repair, reconditioning, erection of mom c-frame: dismantling of mom top link, arresting of counter weight link, dismantling of c-frame, repair of c-frame, dismantling of c-frame water connections, re-conditioning/replacement of bottom link shaft, fixing of c-frame, fixing of top link, connection of water lines and alignment of cframe with respect to level and machine axis using mould and section ethelons. 33. repair, alignment of c-frames w.r.t. sections: checking of mould c-frame with respect to axis of the strand, rectification of location of mould bed bolts blocks, straightening of c-frame arms, leveling of c-frame with respect to machine radius, arresting of water leakages. 34. dismantling, repair, erection of scz water seat block: dismantling of scz water seat block and removal of metal jam, repair of the block, removal of ms pipelines/joints if any and replacement with ss pipelines/joints, fixing of water seat block. 35. repair jobs on mom drive gear box: reconditioning of mom drive gear box including change of internals. alignment of drive frame with spirit level and master level. 36. repair jobs on eccentric unit: eccentric tie rod adjustment for smooth oscillation of the mechanism. adjustment of counter weights. 37. change of mom eccentric unit: dismantling of defective eccentric unit, fixing of reconditioned/repaired eccentric unit and adjustment of oscillation. 38. change of mom top link: arresting of mould c-frame, dismantling of mom top link, fixing of new top link, leveling of c-frame with respect to machine radius. 39. quarterly repair/rectification jobs on l&t stand: cleaning of all weld joints of turret area, checking of housing top flange bolts for looseness and measurement of gap with feeler gauge in presence of site engineer, cleaning of drive gear box area, checking of drive gear box flange bolts surface for any gap with feeler gauge, thorough cleaning of axle retaining covers of top and bottom links and measurement of clearances, rectifications as suggested by the engineer. 40. change of drive gear box of l&t stand: dismantling of drive room, dismantling of drive motor frames and motors, dismantling of gearbox, erection and alignment of drive motors and frames, erection of drive gearbox, erection of drive room and welding. 41. half yearly repair/rectification jobs on l&t stand: removal of floor covers, cleaning of all weld joints thoroughly for dp test, providing assistance for dp test as instructed by the engineer, rectification of defects noticed in dp test. 42. annual repair/rectification jobs on l&t stand: dismantling of floor covers, thorough cleaning of all weld joints of l&t stand, providing assistance for dp test, rectification of defects noticed in dp test, load test of l&t stand, measurement of deflection readings as per the instructions of the engineer, measurements of clearances of column foundation bolts, thermal tightening of column foundation bolts as per the instructions of the engineer, fixing of floor covers. 43. repair/change of l&t drive room: dismantling of drive room structures, fabrication/repair of drive room structures, erection, alignment and welding of drive room structures. 44. replacement of seals of l&t rotary joint: dismantling of rotary joint, dismantling of seals, thorough cleaning, reconditioning/repair of rotary joint, fixing of seals as per the sequence and as suggested by the site engineer. 45. repair of dummy bar conveyers: maintenance of all 24 dummy bar conveyors of ccm-1 to ccm-6 by carrying out the following jobs to keep the conveyors in working condition, replacing damaged conveyors along with parking rollers, grip assembly, replacing the damaged rope, repairing the hook carriage, rectification of front and back guides, channels of conveyor. repair of horizontal guides and other structural repair of conveyor, reposition of conveyor carriage assembly in support guides in case of any problem, removing the dummy bar if it is defective or for carrying out the repair of conveyor, repair/replacement of vertical guide channels, fabrication of small parts like hook carriage tie rod, stopper etc. 46. mom lever unit bearing changing: jobs including boq no 32 and boq no 33 removal of counter weights, mom lever unit bearing changing on both sides by removing plumber blocks and fixing the same along with counter weights. also oscillation checking and rectification. 47. tk1/tk spline welding: tk1/tk stands igb spline housing and welding both in position and removed stands if required. 48. igb changing for tk stand: igb removal from the stand and fixing, orientation changing of igb if required. 49. igb locking: tk1/tk stands igb locking with bracket along with spline welding to stand. 50. idle roller stand roller changing: removal of damaged roller, cleaning, new roller fixing. 51. ccm#2 mould supporting frame top link changing/revisioning: removal of top link, revision/changing of bearings in the top link, fixing of top link in the position. 52. ccm#2 mould supporting frame bottom shaft bearing changing/revisioning: removal of top link, mould c-frame, revisioning/changing of bearings/shaft, fixing of shafts, c-frame and top link. 53. total changing/revisioning of ccm#2 mould supporting frame: removal of mould c-frame, changing/revisioning of mould water seats, arresting water leakages from frame, revisioning of leveling pads, fixing of revisioned or spare stand. 54. total changing/revisioning of ccm#2 section supporting roller: removal of damaged supporting roller, fixing of spare/revisioned supporting roller. 55. total checking of ccm#2 alignment with section and mould ethelon: placement of mould ethelon, placement of section ethelon, checking the total radius with template from mould c-frame to n1, removal of both section and mould ethelon, radius correction to be done. 56. periodical maintenance of electric hoist in mom room of ccm: strictly follow the periodical maintenance schedule, gear box oil top-up, greasing of guide and guide wheels, tightening of foundation bolts.

Visakhapatnam, Andhra Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

25 |Bid Value:₹ 1.25 Cr. |EMD:₹ 2.49 Lakh |25-09-2026 7 Days Left|T247 ID-103927474

mobile flash butt welding under aden/hq-i sub-division.

Jhansi, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

26 |Bid Value:₹ 1.06 Cr. |EMD:₹ 2.13 Lakh |06-10-2026 18 Days Left|T247 ID-104108954

flash butt welding for conversion of swr into lwr under jurisdiction of sr. den/iii/ varanasi.

Varanasi, Uttar Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

27 |Bid Value:₹ 1.01 Cr. |EMD:₹ 2.03 Lakh |05-10-2026 17 Days Left|T247 ID-104145546

open tender for flash butt welding of 60kg/52kg (90/72 uts,r-260),(new/sh/sr/ swr/lwr) rail at site with contractors mobile flash butt welding plant in asansol division.

Asansol, West Bengal, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

28 |Bid Value:₹ 78.70 Lakh |EMD:₹ 1.57 Lakh |29-09-2026 11 Days Left|T247 ID-104038569

reconditioning of tongue rails, removing burrs, welding of slide chairs, broken plates of points and crossings under jurisdiction of senior divisional engineer (west) - ahmedabad.

Ahmedabad, Gujarat, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

29 |Bid Value:₹ 65.83 Lakh |EMD:₹ 1.32 Lakh |18-09-2026 Ending Today|T247 ID-103902823

corrigendum : facility management service- manpower based (version 2) - industrial; helper; unskilled , facility management service- manpower based (version 2) - industrial; data entry; skilled , facility management service- manpower based (version 2) - industrial; o and m of electronics; skilled , facility management service- manpower based (version 2) - industrial; o&m of electrical work; skilled , facility management service- manpower based (version 2) - industrial; welding; skilled , facility management service- manpower based (version 2) - industrial; computer maintenance; skilled

Thane, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

30 |Bid Value:₹ 65.81 Lakh |EMD:₹ 1.32 Lakh |24-09-2026 6 Days Left|T247 ID-103927029

flash butt welding of 10 rail panels/ free rails/ 2 rail panels/ 3 rail panels of all rail sections (new/sh) at site (in situ/cess) using mobile flash butt welding plant under the jurisdiction of sr. den/ii/kir.

Katihar, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

31 |Bid Value:₹ 38.83 Lakh |EMD:₹ 77.66 K |29-09-2026 11 Days Left|T247 ID-104094722

customized amccmc for pre-owned products - amoc service charges inclusive of men materials tools transportation welding paint touchup all breakdown attentions and other miscellaneous expenses the operation of the quick watering system has to be done.. , customized amccmc for pre-owned products - essential spare (on conditional basis) these spares will be used when required and firm will claim for such items which will be used; as mentioned in tender bid document; comprehensive maintenance contract..

Ambala, Haryana, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

32 |Bid Value:₹ 37.76 Lakh |EMD:₹ 75.50 K |09-10-2026 21 Days Left|T247 ID-104442557

supply, installation, testing and commissioning of telecom material in connection with (i) shambhupura - two new freight examination line & upgradation of existing examination line. (ii) ratlam-rtm dn yard provision of pathway ,examination & pathway light, welding facility, compressor & store room in connection with up- gradation of freight examination facility. (iii) ratlam-infrastructure facilities for maintenance of hhp electric locomotives at. (iv) dahod - modernization of stores depot dahod.

Ratlam, Madhya Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

33 |Bid Value:₹ 31.00 Lakh |EMD:₹ 60.00 K |30-09-2026 12 Days Left|T247 ID-104399775

customized amccmc for pre-owned products - fabrication & erection structural of new foundation & hooking up with existing trestletrd and system; fabrication & erection structural of new foundation & hooking up with existing trestletrd and system; .. , customized amccmc for pre- owned products - trestle alignment and related job; trestle alignment and related job; annual maintenance contract (amc); as and when required; yes , customized amccmc for pre-owned products - broken foundation bolts replacement& weldingstructural repairing; broken foundation bolts replacement& weldingstructural repairing; annual maintenance contract (amc); as and when required; yes

Bokajan, Assam, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

34 |Bid Value:₹ 23.50 Lakh |EMD:₹ 47.00 K |24-09-2026 6 Days Left|T247 ID-103870226

repairing, joining (welding) and painting of corroded water pipelines at aiims patna

Patna, Bihar, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

35 |Bid Value:₹ 22.01 Lakh |EMD:₹ Refer Docs |22-09-2026 4 Days Left|T247 ID-104296941

shifting of existing water supply pipe line due to construction of new culvert at amjhar puliya ,village amjhar, repairing and maintenance of old quarter in division store ramganjmandi, construction of store room on departmental land of urban water supply scheme udpura, div ramganjmandi (kota), repair of hand pump, supply of gap pieces to raise handpumps by fixing 6 mm thick base plates on both sides on 150 mm ms pipe including making proper holes on both plates, welding , grinding etc. the length of the 150 mm pipe used not be more than 30 cm. gap piece supllied in division store r.mandi.

Kota, Rajasthan, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

36 |Bid Value:₹ 18.26 Lakh |EMD:₹ 18.26 K |21-09-2026 3 Days Left|T247 ID-104246496

providing tack welding to tower nuts & bolts of 400kv transmission line towers under the jurisdiction of 400kv line maintenance sub division-i, girwali under 400kv rs o&m division, girwali.

Osmanabad, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

37 |Bid Value:₹ 14.86 Lakh |EMD:₹ Refer Docs |24-09-2026 6 Days Left|T247 ID-104085212

corrigendum : custom bid for services - contract for specialized paut manpower for witnessing activities associated with ttps stage-3 sg pressure parts welding works

Talcher, Orissa, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

38 |Bid Value:₹ 14.17 Lakh |EMD:₹ 34.65 K |25-09-2026 7 Days Left|T247 ID-104382537

a r m o lwss shimla town from river giri sh restoration of leakage of raw water stage of twin rising main of 300 mm dia d.i pipe and mserw pipe alongwith c i fittings by cutting welding jointing near raw water comman header sump well old

Shimla, Himachal Pradesh, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

39 |Bid Value:₹ 11.21 Lakh |EMD:₹ 22.40 K |24-09-2026 6 Days Left|T247 ID-103972464

supply of rdso approved welders for welding of rail joints during day to day track maintenance work under sr den/ratnagiri section

Ratnagiri, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

40 |Bid Value:₹ 11.21 Lakh |EMD:₹ 22.40 K |24-09-2026 6 Days Left|T247 ID-103979278

supply of rdso approved welders for welding of rail joints during day to day track maintenance work under sr den/ratnagiri section

Ratnagiri, Maharashtra, India

AI summaryBid / No Bid DecisionGenerate annexuresDraft Full Bid

BID NOW

534+ Latest Welding Work Tenders

Live Welding Work Tenders 2026

Izatnagar, Uttar Pradesh, India

Chakradharpur, Jharkhand, India

Asansol, West Bengal, India

Visakhapatnam, Andhra Pradesh, India

Jhansi, Uttar Pradesh, India

Varanasi, Uttar Pradesh, India

Asansol, West Bengal, India

Ahmedabad, Gujarat, India

Thane, Maharashtra, India

Katihar, Bihar, India

Ambala, Haryana, India

Ratlam, Madhya Pradesh, India

Bokajan, Assam, India

Patna, Bihar, India

Kota, Rajasthan, India

Osmanabad, Maharashtra, India

Talcher, Orissa, India

Shimla, Himachal Pradesh, India

Ratnagiri, Maharashtra, India

Ratnagiri, Maharashtra, India